diff options
-rw-r--r-- | block/t10-pi.c | 110 | ||||
-rw-r--r-- | drivers/scsi/sd.c | 8 | ||||
-rw-r--r-- | drivers/scsi/sd.h | 9 | ||||
-rw-r--r-- | drivers/scsi/sd_dif.c | 113 | ||||
-rw-r--r-- | include/linux/t10-pi.h | 3 |
5 files changed, 118 insertions, 125 deletions
diff --git a/block/t10-pi.c b/block/t10-pi.c index a98db384048f..62aed77d0bb9 100644 --- a/block/t10-pi.c +++ b/block/t10-pi.c @@ -184,3 +184,113 @@ const struct blk_integrity_profile t10_pi_type3_ip = { .verify_fn = t10_pi_type3_verify_ip, }; EXPORT_SYMBOL(t10_pi_type3_ip); + +/** + * t10_pi_prepare - prepare PI prior submitting request to device + * @rq: request with PI that should be prepared + * @protection_type: PI type (Type 1/Type 2/Type 3) + * + * For Type 1/Type 2, the virtual start sector is the one that was + * originally submitted by the block layer for the ref_tag usage. Due to + * partitioning, MD/DM cloning, etc. the actual physical start sector is + * likely to be different. Remap protection information to match the + * physical LBA. + * + * Type 3 does not have a reference tag so no remapping is required. + */ +void t10_pi_prepare(struct request *rq, u8 protection_type) +{ + const int tuple_sz = rq->q->integrity.tuple_size; + u32 ref_tag = t10_pi_ref_tag(rq); + struct bio *bio; + + if (protection_type == T10_PI_TYPE3_PROTECTION) + return; + + __rq_for_each_bio(bio, rq) { + struct bio_integrity_payload *bip = bio_integrity(bio); + u32 virt = bip_get_seed(bip) & 0xffffffff; + struct bio_vec iv; + struct bvec_iter iter; + + /* Already remapped? */ + if (bip->bip_flags & BIP_MAPPED_INTEGRITY) + break; + + bip_for_each_vec(iv, bip, iter) { + void *p, *pmap; + unsigned int j; + + pmap = kmap_atomic(iv.bv_page); + p = pmap + iv.bv_offset; + for (j = 0; j < iv.bv_len; j += tuple_sz) { + struct t10_pi_tuple *pi = p; + + if (be32_to_cpu(pi->ref_tag) == virt) + pi->ref_tag = cpu_to_be32(ref_tag); + virt++; + ref_tag++; + p += tuple_sz; + } + + kunmap_atomic(pmap); + } + + bip->bip_flags |= BIP_MAPPED_INTEGRITY; + } +} +EXPORT_SYMBOL(t10_pi_prepare); + +/** + * t10_pi_complete - prepare PI prior returning request to the block layer + * @rq: request with PI that should be prepared + * @protection_type: PI type (Type 1/Type 2/Type 3) + * @intervals: total elements to prepare + * + * For Type 1/Type 2, the virtual start sector is the one that was + * originally submitted by the block layer for the ref_tag usage. Due to + * partitioning, MD/DM cloning, etc. the actual physical start sector is + * likely to be different. Since the physical start sector was submitted + * to the device, we should remap it back to virtual values expected by the + * block layer. + * + * Type 3 does not have a reference tag so no remapping is required. + */ +void t10_pi_complete(struct request *rq, u8 protection_type, + unsigned int intervals) +{ + const int tuple_sz = rq->q->integrity.tuple_size; + u32 ref_tag = t10_pi_ref_tag(rq); + struct bio *bio; + + if (protection_type == T10_PI_TYPE3_PROTECTION) + return; + + __rq_for_each_bio(bio, rq) { + struct bio_integrity_payload *bip = bio_integrity(bio); + u32 virt = bip_get_seed(bip) & 0xffffffff; + struct bio_vec iv; + struct bvec_iter iter; + + bip_for_each_vec(iv, bip, iter) { + void *p, *pmap; + unsigned int j; + + pmap = kmap_atomic(iv.bv_page); + p = pmap + iv.bv_offset; + for (j = 0; j < iv.bv_len && intervals; j += tuple_sz) { + struct t10_pi_tuple *pi = p; + + if (be32_to_cpu(pi->ref_tag) == ref_tag) + pi->ref_tag = cpu_to_be32(virt); + virt++; + ref_tag++; + intervals--; + p += tuple_sz; + } + + kunmap_atomic(pmap); + } + } +} +EXPORT_SYMBOL(t10_pi_complete); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 9421d9877730..bbebdc3769b0 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1119,7 +1119,7 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt) SCpnt->cmnd[0] = WRITE_6; if (blk_integrity_rq(rq)) - sd_dif_prepare(SCpnt); + t10_pi_prepare(SCpnt->request, sdkp->protection_type); } else if (rq_data_dir(rq) == READ) { SCpnt->cmnd[0] = READ_6; @@ -2047,8 +2047,10 @@ static int sd_done(struct scsi_cmnd *SCpnt) "sd_done: completed %d of %d bytes\n", good_bytes, scsi_bufflen(SCpnt))); - if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt)) - sd_dif_complete(SCpnt, good_bytes); + if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt) && + good_bytes) + t10_pi_complete(SCpnt->request, sdkp->protection_type, + good_bytes / scsi_prot_interval(SCpnt)); return good_bytes; } diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 392c7d078ae3..a7d4f50b67d4 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -254,21 +254,12 @@ static inline unsigned int sd_prot_flag_mask(unsigned int prot_op) #ifdef CONFIG_BLK_DEV_INTEGRITY extern void sd_dif_config_host(struct scsi_disk *); -extern void sd_dif_prepare(struct scsi_cmnd *scmd); -extern void sd_dif_complete(struct scsi_cmnd *, unsigned int); #else /* CONFIG_BLK_DEV_INTEGRITY */ static inline void sd_dif_config_host(struct scsi_disk *disk) { } -static inline int sd_dif_prepare(struct scsi_cmnd *scmd) -{ - return 0; -} -static inline void sd_dif_complete(struct scsi_cmnd *cmd, unsigned int a) -{ -} #endif /* CONFIG_BLK_DEV_INTEGRITY */ diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index d8de43d359ac..db72c82486e3 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -95,116 +95,3 @@ out: blk_integrity_register(disk, &bi); } -/* - * The virtual start sector is the one that was originally submitted - * by the block layer. Due to partitioning, MD/DM cloning, etc. the - * actual physical start sector is likely to be different. Remap - * protection information to match the physical LBA. - * - * From a protocol perspective there's a slight difference between - * Type 1 and 2. The latter uses 32-byte CDBs exclusively, and the - * reference tag is seeded in the CDB. This gives us the potential to - * avoid virt->phys remapping during write. However, at read time we - * don't know whether the virt sector is the same as when we wrote it - * (we could be reading from real disk as opposed to MD/DM device. So - * we always remap Type 2 making it identical to Type 1. - * - * Type 3 does not have a reference tag so no remapping is required. - */ -void sd_dif_prepare(struct scsi_cmnd *scmd) -{ - const int tuple_sz = sizeof(struct t10_pi_tuple); - struct bio *bio; - struct scsi_disk *sdkp; - struct t10_pi_tuple *pi; - u32 phys, virt; - - sdkp = scsi_disk(scmd->request->rq_disk); - - if (sdkp->protection_type == T10_PI_TYPE3_PROTECTION) - return; - - phys = t10_pi_ref_tag(scmd->request); - - __rq_for_each_bio(bio, scmd->request) { - struct bio_integrity_payload *bip = bio_integrity(bio); - struct bio_vec iv; - struct bvec_iter iter; - unsigned int j; - - /* Already remapped? */ - if (bip->bip_flags & BIP_MAPPED_INTEGRITY) - break; - - virt = bip_get_seed(bip) & 0xffffffff; - - bip_for_each_vec(iv, bip, iter) { - pi = kmap_atomic(iv.bv_page) + iv.bv_offset; - - for (j = 0; j < iv.bv_len; j += tuple_sz, pi++) { - - if (be32_to_cpu(pi->ref_tag) == virt) - pi->ref_tag = cpu_to_be32(phys); - - virt++; - phys++; - } - - kunmap_atomic(pi); - } - - bip->bip_flags |= BIP_MAPPED_INTEGRITY; - } -} - -/* - * Remap physical sector values in the reference tag to the virtual - * values expected by the block layer. - */ -void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes) -{ - const int tuple_sz = sizeof(struct t10_pi_tuple); - struct scsi_disk *sdkp; - struct bio *bio; - struct t10_pi_tuple *pi; - unsigned int j, intervals; - u32 phys, virt; - - sdkp = scsi_disk(scmd->request->rq_disk); - - if (sdkp->protection_type == T10_PI_TYPE3_PROTECTION || good_bytes == 0) - return; - - intervals = good_bytes / scsi_prot_interval(scmd); - phys = t10_pi_ref_tag(scmd->request); - - __rq_for_each_bio(bio, scmd->request) { - struct bio_integrity_payload *bip = bio_integrity(bio); - struct bio_vec iv; - struct bvec_iter iter; - - virt = bip_get_seed(bip) & 0xffffffff; - - bip_for_each_vec(iv, bip, iter) { - pi = kmap_atomic(iv.bv_page) + iv.bv_offset; - - for (j = 0; j < iv.bv_len; j += tuple_sz, pi++) { - - if (intervals == 0) { - kunmap_atomic(pi); - return; - } - - if (be32_to_cpu(pi->ref_tag) == phys) - pi->ref_tag = cpu_to_be32(virt); - - virt++; - phys++; - intervals--; - } - - kunmap_atomic(pi); - } - } -} - diff --git a/include/linux/t10-pi.h b/include/linux/t10-pi.h index c40511f4e63d..5a427c289f58 100644 --- a/include/linux/t10-pi.h +++ b/include/linux/t10-pi.h @@ -51,5 +51,8 @@ extern const struct blk_integrity_profile t10_pi_type1_crc; extern const struct blk_integrity_profile t10_pi_type1_ip; extern const struct blk_integrity_profile t10_pi_type3_crc; extern const struct blk_integrity_profile t10_pi_type3_ip; +extern void t10_pi_prepare(struct request *rq, u8 protection_type); +extern void t10_pi_complete(struct request *rq, u8 protection_type, + unsigned int intervals); #endif |