diff options
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 73 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 1 |
4 files changed, 0 insertions, 81 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index e0fe8e88fbfa..bdac7bd1725a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -664,75 +664,6 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_set_fiber_fixed_speed - Set module link speed for fixed fiber - * @hw: pointer to hardware structure - * @speed: link speed to set - * - * We set the module speed differently for fixed fiber. For other - * multi-speed devices we don't have an error value so here if we - * detect an error we just log it and exit. - */ -static void ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, - ixgbe_link_speed speed) -{ - s32 status; - u8 rs, eeprom_data; - - switch (speed) { - case IXGBE_LINK_SPEED_10GB_FULL: - /* one bit mask same as setting on */ - rs = IXGBE_SFF_SOFT_RS_SELECT_10G; - break; - case IXGBE_LINK_SPEED_1GB_FULL: - rs = IXGBE_SFF_SOFT_RS_SELECT_1G; - break; - default: - hw_dbg(hw, "Invalid fixed module speed\n"); - return; - } - - /* Set RS0 */ - status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, - IXGBE_I2C_EEPROM_DEV_ADDR2, - &eeprom_data); - if (status) { - hw_dbg(hw, "Failed to read Rx Rate Select RS0\n"); - goto out; - } - - eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs; - - status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, - IXGBE_I2C_EEPROM_DEV_ADDR2, - eeprom_data); - if (status) { - hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); - goto out; - } - - /* Set RS1 */ - status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, - IXGBE_I2C_EEPROM_DEV_ADDR2, - &eeprom_data); - if (status) { - hw_dbg(hw, "Failed to read Rx Rate Select RS1\n"); - goto out; - } - - eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; - - status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, - IXGBE_I2C_EEPROM_DEV_ADDR2, - eeprom_data); - if (status) { - hw_dbg(hw, "Failed to write Rx Rate Select RS1\n"); - goto out; - } -out: - return; -} - -/** * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -842,10 +773,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, /* Set the module link speed */ switch (hw->phy.media_type) { - case ixgbe_media_type_fiber_fixed: - ixgbe_set_fiber_fixed_speed(hw, - IXGBE_LINK_SPEED_1GB_FULL); - break; case ixgbe_media_type_fiber: esdp_reg &= ~IXGBE_ESDP_SDP5; esdp_reg |= IXGBE_ESDP_SDP5_DIR; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 38ca24079980..7a9d8744408f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -73,7 +73,6 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) bool link_up; switch (hw->phy.media_type) { - case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: hw->mac.ops.check_link(hw, &speed, &link_up, false); /* if link is down, assume supported */ @@ -147,7 +146,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) goto out; /* only backplane uses autoc so fall though */ - case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); @@ -2398,7 +2396,6 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) switch (hw->phy.media_type) { /* Autoneg flow control on fiber adapters */ - case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: if (speed == IXGBE_LINK_SPEED_1GB_FULL) ret_val = ixgbe_fc_autoneg_fiber(hw); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 478eca9761ca..4a456c974ef2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -66,9 +66,6 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 -#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 -#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 -#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 @@ -80,7 +77,6 @@ #define IXGBE_I2C_EEPROM_STATUS_PASS 0x1 #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 - /* Flow control defines */ #define IXGBE_TAF_SYM_PAUSE 0x400 #define IXGBE_TAF_ASM_PAUSE 0x800 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 5b0c73079991..b5408eb8670b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2664,7 +2664,6 @@ enum ixgbe_sfp_type { enum ixgbe_media_type { ixgbe_media_type_unknown = 0, ixgbe_media_type_fiber, - ixgbe_media_type_fiber_fixed, ixgbe_media_type_fiber_qsfp, ixgbe_media_type_fiber_lco, ixgbe_media_type_copper, |