diff options
| -rw-r--r-- | Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt | 24 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufs.h | 25 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pltfrm.c | 100 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 193 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 3 |
5 files changed, 342 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 20468b2a7516..65e31173dccd 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -8,9 +8,33 @@ Required properties: - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> +Optional properties: +- vcc-supply : phandle to VCC supply regulator node +- vccq-supply : phandle to VCCQ supply regulator node +- vccq2-supply : phandle to VCCQ2 supply regulator node +- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V + or 2.7-3.6V. This boolean property when set, specifies + to use low voltage range of 1.7-1.95V. Note for external + UFS cards this property is invalid and valid VCC range is + always 2.7-3.6V. +- vcc-max-microamp : specifies max. load that can be drawn from vcc supply +- vccq-max-microamp : specifies max. load that can be drawn from vccq supply +- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply + +Note: If above properties are not defined it can be assumed that the supply +regulators are always on. + Example: ufshc@0xfc598000 { compatible = "jedec,ufs-1.1"; reg = <0xfc598000 0x800>; interrupts = <0 28 0>; + + vcc-supply = <&xxx_reg1>; + vcc-supply-1p8; + vccq-supply = <&xxx_reg2>; + vccq2-supply = <&xxx_reg3>; + vcc-max-microamp = 500000; + vccq-max-microamp = 200000; + vccq2-max-microamp = 200000; }; diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index fafcf5e354c6..729ce7d62d1e 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -362,4 +362,29 @@ struct ufs_query_res { struct utp_upiu_query upiu_res; }; +#define UFS_VREG_VCC_MIN_UV 2700000 /* uV */ +#define UFS_VREG_VCC_MAX_UV 3600000 /* uV */ +#define UFS_VREG_VCC_1P8_MIN_UV 1700000 /* uV */ +#define UFS_VREG_VCC_1P8_MAX_UV 1950000 /* uV */ +#define UFS_VREG_VCCQ_MIN_UV 1100000 /* uV */ +#define UFS_VREG_VCCQ_MAX_UV 1300000 /* uV */ +#define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */ +#define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */ + +struct ufs_vreg { + struct regulator *reg; + const char *name; + bool enabled; + int min_uV; + int max_uV; + int min_uA; + int max_uA; +}; + +struct ufs_vreg_info { + struct ufs_vreg *vcc; + struct ufs_vreg *vccq; + struct ufs_vreg *vccq2; +}; + #endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index d727b1a83e95..51e47c429a1f 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -53,6 +53,99 @@ static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev) return NULL; } +#define MAX_PROP_SIZE 32 +static int ufshcd_populate_vreg(struct device *dev, const char *name, + struct ufs_vreg **out_vreg) +{ + int ret = 0; + char prop_name[MAX_PROP_SIZE]; + struct ufs_vreg *vreg = NULL; + struct device_node *np = dev->of_node; + + if (!np) { + dev_err(dev, "%s: non DT initialization\n", __func__); + goto out; + } + + snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name); + if (!of_parse_phandle(np, prop_name, 0)) { + dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n", + __func__, prop_name); + goto out; + } + + vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL); + if (!vreg) { + dev_err(dev, "No memory for %s regulator\n", name); + goto out; + } + + vreg->name = kstrdup(name, GFP_KERNEL); + + snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name); + ret = of_property_read_u32(np, prop_name, &vreg->max_uA); + if (ret) { + dev_err(dev, "%s: unable to find %s err %d\n", + __func__, prop_name, ret); + goto out_free; + } + + vreg->min_uA = 0; + if (!strcmp(name, "vcc")) { + if (of_property_read_bool(np, "vcc-supply-1p8")) { + vreg->min_uV = UFS_VREG_VCC_1P8_MIN_UV; + vreg->max_uV = UFS_VREG_VCC_1P8_MAX_UV; + } else { + vreg->min_uV = UFS_VREG_VCC_MIN_UV; + vreg->max_uV = UFS_VREG_VCC_MAX_UV; + } + } else if (!strcmp(name, "vccq")) { + vreg->min_uV = UFS_VREG_VCCQ_MIN_UV; + vreg->max_uV = UFS_VREG_VCCQ_MAX_UV; + } else if (!strcmp(name, "vccq2")) { + vreg->min_uV = UFS_VREG_VCCQ2_MIN_UV; + vreg->max_uV = UFS_VREG_VCCQ2_MAX_UV; + } + + goto out; + +out_free: + devm_kfree(dev, vreg); + vreg = NULL; +out: + if (!ret) + *out_vreg = vreg; + return ret; +} + +/** + * ufshcd_parse_regulator_info - get regulator info from device tree + * @hba: per adapter instance + * + * Get regulator info from device tree for vcc, vccq, vccq2 power supplies. + * If any of the supplies are not defined it is assumed that they are always-on + * and hence return zero. If the property is defined but parsing is failed + * then return corresponding error. + */ +static int ufshcd_parse_regulator_info(struct ufs_hba *hba) +{ + int err; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + err = ufshcd_populate_vreg(dev, "vcc", &info->vcc); + if (err) + goto out; + + err = ufshcd_populate_vreg(dev, "vccq", &info->vccq); + if (err) + goto out; + + err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2); +out: + return err; +} + #ifdef CONFIG_PM /** * ufshcd_pltfrm_suspend - suspend power management function @@ -173,6 +266,13 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev) hba->vops = get_variant_ops(&pdev->dev); + err = ufshcd_parse_regulator_info(hba); + if (err) { + dev_err(&pdev->dev, "%s: regulator init failed %d\n", + __func__, err); + goto out; + } + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index d0565b07dc8a..ef8519e70e97 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -68,6 +68,16 @@ /* Interrupt aggregation default timeout, unit: 40us */ #define INT_AGGR_DEF_TO 0x02 +#define ufshcd_toggle_vreg(_dev, _vreg, _on) \ + ({ \ + int _ret; \ + if (_on) \ + _ret = ufshcd_enable_vreg(_dev, _vreg); \ + else \ + _ret = ufshcd_disable_vreg(_dev, _vreg); \ + _ret; \ + }) + enum { UFSHCD_MAX_CHANNEL = 0, UFSHCD_MAX_ID = 1, @@ -3193,6 +3203,153 @@ static struct scsi_host_template ufshcd_driver_template = { .can_queue = UFSHCD_CAN_QUEUE, }; +static int ufshcd_config_vreg(struct device *dev, + struct ufs_vreg *vreg, bool on) +{ + int ret = 0; + struct regulator *reg = vreg->reg; + const char *name = vreg->name; + int min_uV, uA_load; + + BUG_ON(!vreg); + + if (regulator_count_voltages(reg) > 0) { + min_uV = on ? vreg->min_uV : 0; + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); + if (ret) { + dev_err(dev, "%s: %s set voltage failed, err=%d\n", + __func__, name, ret); + goto out; + } + + uA_load = on ? vreg->max_uA : 0; + ret = regulator_set_optimum_mode(reg, uA_load); + if (ret >= 0) { + /* + * regulator_set_optimum_mode() returns new regulator + * mode upon success. + */ + ret = 0; + } else { + dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", + __func__, name, uA_load, ret); + goto out; + } + } +out: + return ret; +} + +static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg || vreg->enabled) + goto out; + + ret = ufshcd_config_vreg(dev, vreg, true); + if (!ret) + ret = regulator_enable(vreg->reg); + + if (!ret) + vreg->enabled = true; + else + dev_err(dev, "%s: %s enable failed, err=%d\n", + __func__, vreg->name, ret); +out: + return ret; +} + +static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg || !vreg->enabled) + goto out; + + ret = regulator_disable(vreg->reg); + + if (!ret) { + /* ignore errors on applying disable config */ + ufshcd_config_vreg(dev, vreg, false); + vreg->enabled = false; + } else { + dev_err(dev, "%s: %s disable failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on) +{ + int ret = 0; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + if (!info) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vcc, on); + if (ret) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vccq, on); + if (ret) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vccq2, on); + if (ret) + goto out; + +out: + if (ret) { + ufshcd_toggle_vreg(dev, info->vccq2, false); + ufshcd_toggle_vreg(dev, info->vccq, false); + ufshcd_toggle_vreg(dev, info->vcc, false); + } + return ret; +} + +static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg) + goto out; + + vreg->reg = devm_regulator_get(dev, vreg->name); + if (IS_ERR(vreg->reg)) { + ret = PTR_ERR(vreg->reg); + dev_err(dev, "%s: %s get failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +static int ufshcd_init_vreg(struct ufs_hba *hba) +{ + int ret = 0; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + if (!info) + goto out; + + ret = ufshcd_get_vreg(dev, info->vcc); + if (ret) + goto out; + + ret = ufshcd_get_vreg(dev, info->vccq); + if (ret) + goto out; + + ret = ufshcd_get_vreg(dev, info->vccq2); +out: + return ret; +} + static int ufshcd_variant_hba_init(struct ufs_hba *hba) { int err = 0; @@ -3248,6 +3405,36 @@ static void ufshcd_variant_hba_exit(struct ufs_hba *hba) hba->vops->exit(hba); } +static int ufshcd_hba_init(struct ufs_hba *hba) +{ + int err; + + err = ufshcd_init_vreg(hba); + if (err) + goto out; + + err = ufshcd_setup_vreg(hba, true); + if (err) + goto out; + + err = ufshcd_variant_hba_init(hba); + if (err) + goto out_disable_vreg; + + goto out; + +out_disable_vreg: + ufshcd_setup_vreg(hba, false); +out: + return err; +} + +static void ufshcd_hba_exit(struct ufs_hba *hba) +{ + ufshcd_variant_hba_exit(hba); + ufshcd_setup_vreg(hba, false); +} + /** * ufshcd_suspend - suspend power management function * @hba: per adapter instance @@ -3333,7 +3520,7 @@ void ufshcd_remove(struct ufs_hba *hba) scsi_host_put(hba->host); - ufshcd_variant_hba_exit(hba); + ufshcd_hba_exit(hba); } EXPORT_SYMBOL_GPL(ufshcd_remove); @@ -3412,7 +3599,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->mmio_base = mmio_base; hba->irq = irq; - err = ufshcd_variant_hba_init(hba); + err = ufshcd_hba_init(hba); if (err) goto out_error; @@ -3504,7 +3691,7 @@ out_remove_scsi_host: scsi_remove_host(hba->host); out_disable: scsi_host_put(host); - ufshcd_variant_hba_exit(hba); + ufshcd_hba_exit(hba); out_error: return err; } diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 8c6bec05283e..c0232f95f5b5 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -52,6 +52,7 @@ #include <linux/pm_runtime.h> #include <linux/clk.h> #include <linux/completion.h> +#include <linux/regulator/consumer.h> #include <asm/irq.h> #include <asm/byteorder.h> @@ -219,6 +220,7 @@ struct ufs_hba_variant_ops { * @saved_uic_err: sticky UIC error mask * @dev_cmd: ufs device management command information * @auto_bkops_enabled: to track whether bkops is enabled in device + * @vreg_info: UFS device voltage regulator information */ struct ufs_hba { void __iomem *mmio_base; @@ -279,6 +281,7 @@ struct ufs_hba { struct ufs_dev_cmd dev_cmd; bool auto_bkops_enabled; + struct ufs_vreg_info vreg_info; }; #define ufshcd_writel(hba, val, reg) \ |