diff options
| -rw-r--r-- | drivers/spi/atmel_spi.c | 127 |
1 files changed, 103 insertions, 24 deletions
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 01ad6320d96c..ad144054da30 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -46,6 +46,7 @@ struct atmel_spi { struct clk *clk; struct platform_device *pdev; unsigned new_1:1; + struct spi_device *stay; u8 stopping; struct list_head queue; @@ -62,29 +63,62 @@ struct atmel_spi { /* * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby * they assume that spi slave device state will not change on deselect, so - * that automagic deselection is OK. Not so! Workaround uses nCSx pins - * as GPIOs; or newer controllers have CSAAT and friends. + * that automagic deselection is OK. ("NPCSx rises if no data is to be + * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer + * controllers have CSAAT and friends. * - * Since the CSAAT functionality is a bit weird on newer controllers - * as well, we use GPIO to control nCSx pins on all controllers. + * Since the CSAAT functionality is a bit weird on newer controllers as + * well, we use GPIO to control nCSx pins on all controllers, updating + * MR.PCS to avoid confusing the controller. Using GPIOs also lets us + * support active-high chipselects despite the controller's belief that + * only active-low devices/systems exists. + * + * However, at91rm9200 has a second erratum whereby nCS0 doesn't work + * right when driven with GPIO. ("Mode Fault does not allow more than one + * Master on Chip Select 0.") No workaround exists for that ... so for + * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH, + * and (c) will trigger that first erratum in some cases. */ -static inline void cs_activate(struct spi_device *spi) +static void cs_activate(struct atmel_spi *as, struct spi_device *spi) { unsigned gpio = (unsigned) spi->controller_data; unsigned active = spi->mode & SPI_CS_HIGH; + u32 mr; + + mr = spi_readl(as, MR); + mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr); + + dev_dbg(&spi->dev, "activate %u%s, mr %08x\n", + gpio, active ? " (high)" : "", + mr); - dev_dbg(&spi->dev, "activate %u%s\n", gpio, active ? " (high)" : ""); - gpio_set_value(gpio, active); + if (!(cpu_is_at91rm9200() && spi->chip_select == 0)) + gpio_set_value(gpio, active); + spi_writel(as, MR, mr); } -static inline void cs_deactivate(struct spi_device *spi) +static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) { unsigned gpio = (unsigned) spi->controller_data; unsigned active = spi->mode & SPI_CS_HIGH; + u32 mr; - dev_dbg(&spi->dev, "DEactivate %u%s\n", gpio, active ? " (low)" : ""); - gpio_set_value(gpio, !active); + /* only deactivate *this* device; sometimes transfers to + * another device may be active when this routine is called. + */ + mr = spi_readl(as, MR); + if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) { + mr = SPI_BFINS(PCS, 0xf, mr); + spi_writel(as, MR, mr); + } + + dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n", + gpio, active ? " (low)" : "", + mr); + + if (!(cpu_is_at91rm9200() && spi->chip_select == 0)) + gpio_set_value(gpio, !active); } /* @@ -140,6 +174,7 @@ static void atmel_spi_next_xfer(struct spi_master *master, /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer" * mechanism might help avoid the IRQ latency between transfers + * (and improve the nCS0 errata handling on at91rm9200 chips) * * We're also waiting for ENDRX before we start the next * transfer because we need to handle some difficult timing @@ -169,17 +204,25 @@ static void atmel_spi_next_message(struct spi_master *master) { struct atmel_spi *as = spi_master_get_devdata(master); struct spi_message *msg; - u32 mr; + struct spi_device *spi; BUG_ON(as->current_transfer); msg = list_entry(as->queue.next, struct spi_message, queue); + spi = msg->spi; - /* Select the chip */ - mr = spi_readl(as, MR); - mr = SPI_BFINS(PCS, ~(1 << msg->spi->chip_select), mr); - spi_writel(as, MR, mr); - cs_activate(msg->spi); + dev_dbg(master->cdev.dev, "start message %p for %s\n", + msg, spi->dev.bus_id); + + /* select chip if it's not still active */ + if (as->stay) { + if (as->stay != spi) { + cs_deactivate(as, as->stay); + cs_activate(as, spi); + } + as->stay = NULL; + } else + cs_activate(as, spi); atmel_spi_next_xfer(master, msg); } @@ -232,9 +275,13 @@ static void atmel_spi_dma_unmap_xfer(struct spi_master *master, static void atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, - struct spi_message *msg, int status) + struct spi_message *msg, int status, int stay) { - cs_deactivate(msg->spi); + if (!stay || status < 0) + cs_deactivate(as, msg->spi); + else + as->stay = msg->spi; + list_del(&msg->queue); msg->status = status; @@ -324,7 +371,7 @@ atmel_spi_interrupt(int irq, void *dev_id) /* Clear any overrun happening while cleaning up */ spi_readl(as, SR); - atmel_spi_msg_done(master, as, msg, -EIO); + atmel_spi_msg_done(master, as, msg, -EIO, 0); } else if (pending & SPI_BIT(ENDRX)) { ret = IRQ_HANDLED; @@ -342,12 +389,13 @@ atmel_spi_interrupt(int irq, void *dev_id) if (msg->transfers.prev == &xfer->transfer_list) { /* report completed message */ - atmel_spi_msg_done(master, as, msg, 0); + atmel_spi_msg_done(master, as, msg, 0, + xfer->cs_change); } else { if (xfer->cs_change) { - cs_deactivate(msg->spi); + cs_deactivate(as, msg->spi); udelay(1); - cs_activate(msg->spi); + cs_activate(as, msg->spi); } /* @@ -410,6 +458,14 @@ static int atmel_spi_setup(struct spi_device *spi) return -EINVAL; } + /* see notes above re chipselect */ + if (cpu_is_at91rm9200() + && spi->chip_select == 0 + && (spi->mode & SPI_CS_HIGH)) { + dev_dbg(&spi->dev, "setup: can't be active-high\n"); + return -EINVAL; + } + /* speed zero convention is used by some upper layers */ bus_hz = clk_get_rate(as->clk); if (spi->max_speed_hz) { @@ -446,6 +502,14 @@ static int atmel_spi_setup(struct spi_device *spi) return ret; spi->controller_state = (void *)npcs_pin; gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); + } else { + unsigned long flags; + + spin_lock_irqsave(&as->lock, flags); + if (as->stay == spi) + as->stay = NULL; + cs_deactivate(as, spi); + spin_unlock_irqrestore(&as->lock, flags); } dev_dbg(&spi->dev, @@ -502,6 +566,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) } } +#ifdef VERBOSE list_for_each_entry(xfer, &msg->transfers, transfer_list) { dev_dbg(controller, " xfer %p: len %u tx %p/%08x rx %p/%08x\n", @@ -509,6 +574,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma); } +#endif msg->status = -EINPROGRESS; msg->actual_length = 0; @@ -524,8 +590,21 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) static void atmel_spi_cleanup(struct spi_device *spi) { - if (spi->controller_state) - gpio_free((unsigned int)spi->controller_data); + struct atmel_spi *as = spi_master_get_devdata(spi->master); + unsigned gpio = (unsigned) spi->controller_data; + unsigned long flags; + + if (!spi->controller_state) + return; + + spin_lock_irqsave(&as->lock, flags); + if (as->stay == spi) { + as->stay = NULL; + cs_deactivate(as, spi); + } + spin_unlock_irqrestore(&as->lock, flags); + + gpio_free(gpio); } /*-------------------------------------------------------------------------*/ |