summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c32
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c96
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c9
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h9
4 files changed, 48 insertions, 98 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index fc5c628e76a5..f6bb148c5ad3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -87,15 +87,13 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
/* must configure SDIO_CCCR_IENx to enable irq */
data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx,
- data, &ret);
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
/* redirect, configure ane enable io for interrupt signal */
data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
data |= SDIO_SEPINT_ACT_HI;
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
- data, &ret);
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
return 0;
}
@@ -104,9 +102,8 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
brcmf_dbg(TRACE, "Entering\n");
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
- 0, NULL);
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, 0, NULL);
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
if (sdiodev->irq_wake) {
disable_irq_wake(sdiodev->irq);
@@ -157,27 +154,6 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
}
#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
-void
-brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
- u8 data, int *err)
-{
- int status;
- s32 retry = 0;
-
- do {
- if (retry) /* wait for 1 ms till bus get settled down */
- udelay(1000);
- status = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, fnc_num,
- addr, (u8 *) &data);
- } while (status != 0
- && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
- if (err)
- *err = status;
-
- brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n",
- fnc_num, addr, data);
-}
-
int
brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
{
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 85f277c2efab..1e35a3de9595 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -696,8 +696,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
clkreq =
bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ clkreq, &err);
if (err) {
brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
return -EBADE;
@@ -723,8 +723,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
}
devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_DEVICE_CTL, devctl, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
brcmf_dbg(INFO, "CLKCTL: set PENDING\n");
bus->clkstate = CLK_PENDING;
@@ -734,8 +734,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_DEVICE_CTL, devctl, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
}
/* Otherwise, wait here (polling) for HT Avail */
@@ -780,13 +780,13 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_DEVICE_CTL, devctl, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
}
bus->clkstate = CLK_SDONLY;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ clkreq, &err);
brcmf_dbg(INFO, "CLKCTL: turned OFF\n");
if (err) {
brcmf_dbg(ERROR, "Failed access turning clock off: %d\n",
@@ -897,14 +897,12 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep)
/* Turn off our contribution to the HT clock request */
brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR,
- SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
/* Isolate the bus */
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_DEVICE_CTL,
- SBSDIO_DEVCTL_PADS_ISO, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ SBSDIO_DEVCTL_PADS_ISO, NULL);
/* Change state */
bus->sleeping = true;
@@ -912,8 +910,8 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep)
} else {
/* Waking up: bus power up is ok, set local state */
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ 0, NULL);
/* Make sure the controller has the bus up */
brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
@@ -1035,9 +1033,8 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
if (abort)
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_FRAMECTRL,
- SFC_RF_TERM, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_RF_TERM, &err);
bus->f1regdata++;
/* Wait until the packet has been flushed (device/FIFO stable) */
@@ -2173,9 +2170,8 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
bus->tx_sderrs++;
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
- NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_WF_TERM, NULL);
bus->f1regdata++;
for (i = 0; i < 3; i++) {
@@ -2305,17 +2301,16 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
saveclk = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (!err) {
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR,
- (saveclk | SBSDIO_FORCE_HT), &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ (saveclk | SBSDIO_FORCE_HT), &err);
}
if (err)
brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
/* Turn off the bus (F2), free any pending packets */
brcmf_dbg(INTR, "disable SDIO interrupts\n");
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
- SDIO_FUNC_ENABLE_1, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1,
+ NULL);
/* Clear any pending interrupts now that F2 is disabled */
w_sdreg32(bus, local_hostintmask,
@@ -2414,8 +2409,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_DEVICE_CTL, devctl, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
if (err) {
brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
err);
@@ -2536,9 +2531,8 @@ clkwait:
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
- NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_WF_TERM, NULL);
bus->f1regdata++;
for (i = 0; i < 3; i++) {
@@ -2874,9 +2868,8 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_FRAMECTRL,
- SFC_WF_TERM, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_WF_TERM, NULL);
bus->f1regdata++;
for (i = 0; i < 3; i++) {
@@ -3461,9 +3454,8 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
saveclk = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (!err) {
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR,
- (saveclk | SBSDIO_FORCE_HT), &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ (saveclk | SBSDIO_FORCE_HT), &err);
}
if (err) {
brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
@@ -3475,8 +3467,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
offsetof(struct sdpcmd_regs, tosbmailboxdata), &retries);
enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
- enable, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
ready = 0;
@@ -3499,19 +3490,16 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
w_sdreg32(bus, bus->hostintmask,
offsetof(struct sdpcmd_regs, hostintmask), &retries);
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_WATERMARK, 8, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
} else {
/* Disable F2 again */
enable = SDIO_FUNC_ENABLE_1;
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0,
- SDIO_CCCR_IOEx, enable, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
ret = -ENODEV;
}
/* Restore previous clock setting */
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
if (ret == 0) {
ret = brcmf_sdio_intr_register(bus->sdiodev);
@@ -3729,9 +3717,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
* programs PLL control regs
*/
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR,
- BRCMF_INIT_CLKCTL1, &err);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ BRCMF_INIT_CLKCTL1, &err);
if (!err)
clkctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
@@ -3792,16 +3779,15 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
brcmf_dbg(TRACE, "Enter\n");
/* Disable F2 to clear any intermediate frame state on the dongle */
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
- SDIO_FUNC_ENABLE_1, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx,
+ SDIO_FUNC_ENABLE_1, NULL);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
bus->sleeping = false;
bus->rxflow = false;
/* Done with backplane-dependent accesses, can drop clock... */
- brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+ brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
/* ...and initialize clock/power states */
bus->clkstate = CLK_SDONLY;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index 654b7e032b27..d4b390c2acfd 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -425,8 +425,7 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
/* Try forcing SDIO core to do ALPAvail request only */
clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
if (err) {
brcmf_dbg(ERROR, "error writing for HT off\n");
return err;
@@ -454,13 +453,11 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
}
clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
udelay(65);
/* Also, disable the extra SDIO pull-ups */
- brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
- SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+ brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
return 0;
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index decfe0d14bad..7a97cb50f13d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -168,15 +168,6 @@ struct brcmf_sdio_dev {
extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev);
extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
-/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
- * fn: function number
- * addr: unmodified SDIO-space address
- * data: data byte to write
- * err: pointer to error code (or NULL)
- */
-extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func,
- u32 addr, u8 data, int *err);
-
/* Synchronous access to device (client) core registers via CMD53 to F1.
* addr: backplane address (i.e. >= regsva from attach)
* size: register width in bytes (2 or 4)
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 07:34:33 +0300