diff options
33 files changed, 2729 insertions, 362 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 2193be53e773..5ddbe350487a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -318,6 +318,14 @@ Who: Jean Delvare <khali@linux-fr.org> --------------------------- +What: fscher and fscpos drivers +When: June 2009 +Why: Deprecated by the new fschmd driver. +Who: Hans de Goede <hdegoede@redhat.com> + Jean Delvare <khali@linux-fr.org> + +--------------------------- + What: SELinux "compat_net" functionality When: 2.6.30 at the earliest Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg new file mode 100644 index 000000000000..a8321267b5b6 --- /dev/null +++ b/Documentation/hwmon/f71882fg @@ -0,0 +1,89 @@ +Kernel driver f71882fg +====================== + +Supported chips: + * Fintek F71882FG and F71883FG + Prefix: 'f71882fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71862FG and F71863FG + Prefix: 'f71862fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F8000 + Prefix: 'f8000' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + +Author: Hans de Goede <hdegoede@redhat.com> + + +Description +----------- + +Fintek F718xxFG/F8000 Super I/O chips include complete hardware monitoring +capabilities. They can monitor up to 9 voltages (3 for the F8000), 4 fans and +3 temperature sensors. + +These chips also have fan controlling features, using either DC or PWM, in +three different modes (one manual, two automatic). + +The driver assumes that no more than one chip is present, which seems +reasonable. + + +Monitoring +---------- + +The Voltage, Fan and Temperature Monitoring uses the standard sysfs +interface as documented in sysfs-interface, without any exceptions. + + +Fan Control +----------- + +Both PWM (pulse-width modulation) and DC fan speed control methods are +supported. The right one to use depends on external circuitry on the +motherboard, so the driver assumes that the BIOS set the method +properly. + +There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC +voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM +mode where the actual RPM of the fan (as measured) is controlled and the speed +gets specified as 0-100% of the fan#_full_speed file. + +Since both modes work in a 0-100% (mapped to 0-255) scale, there isn't a +whole lot of a difference when modifying fan control settings. The only +important difference is that in RPM mode the 0-100% controls the fan speed +between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs +RPM mode, it will also set fan#_full_speed properly, if it does not then +fan control will not work properly, unless you set a sane fan#_full_speed +value yourself. + +Switching between these modes requires re-initializing a whole bunch of +registers, so the mode which the BIOS has set is kept. The mode is +printed when loading the driver. + +Three different fan control modes are supported; the mode number is written +to the pwm#_enable file. Note that not all modes are supported on all +chips, and some modes may only be available in RPM / PWM mode on the F8000. +Writing an unsupported mode will result in an invalid parameter error. + +* 1: Manual mode + You ask for a specific PWM duty cycle / DC voltage or a specific % of + fan#_full_speed by writing to the pwm# file. This mode is only + available on the F8000 if the fan channel is in RPM mode. + +* 2: Normal auto mode + You can define a number of temperature/fan speed trip points, which % the + fan should run at at this temp and which temp a fan should follow using the + standard sysfs interface. The number and type of trip points is chip + depended, see which files are available in sysfs. + Fan/PWM channel 3 of the F8000 is always in this mode! + +* 3: Thermostat mode (Only available on the F8000 when in duty cycle mode) + The fan speed is regulated to keep the temp the fan is mapped to between + temp#_auto_point2_temp and temp#_auto_point3_temp. + +Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to +fan2 and pwm3 to fan3. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 042c0415140b..659315d98e00 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -26,6 +26,10 @@ Supported chips: Datasheet: Publicly available at the ITE website http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip + * IT8720F + Prefix: 'it8720' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not yet publicly available. * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -71,7 +75,7 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8726F and SiS950 chips. +IT8718F, IT8720F, IT8726F and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -84,19 +88,19 @@ the IT8716F and late IT8712F have 6. They are shared with other functions though, so the functionality may not be available on a given system. The driver dumbly assume it is there. -The IT8718F also features VID inputs (up to 8 pins) but the value is -stored in the Super-I/O configuration space. Due to technical limitations, +The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value +is stored in the Super-I/O configuration space. Due to technical limitations, this value can currently only be read once at initialization time, so the driver won't notice and report changes in the VID value. The two upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. -The IT8716F, IT8718F and later IT8712F revisions have support for +The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional -16-bit tachometer counters for fans 1 to 3. This is better (no more fan -clock divider mess) but not compatible with the older chips and +The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have +optional 16-bit tachometer counters for fans 1 to 3. This is better (no more +fan clock divider mess) but not compatible with the older chips and revisions. The 16-bit tachometer mode is enabled by the driver when one of the above chips is detected. @@ -122,7 +126,7 @@ zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt. The battery voltage in8 does not have limit registers. -The VID lines (IT8712F/IT8716F/IT8718F) encode the core voltage value: +The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by the mainboard and/or processor itself. It is a value in volts. diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70 index 2bdd3feebf53..0d240291e3cc 100644 --- a/Documentation/hwmon/lm70 +++ b/Documentation/hwmon/lm70 @@ -1,9 +1,11 @@ Kernel driver lm70 ================== -Supported chip: +Supported chips: * National Semiconductor LM70 Datasheet: http://www.national.com/pf/LM/LM70.html + * Texas Instruments TMP121/TMP123 + Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html Author: Kaiwan N Billimoria <kaiwan@designergraphix.com> @@ -25,6 +27,14 @@ complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. +As a real (in-tree) example of this "SPI protocol driver" interfacing +with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c +and its associated documentation. + +The TMP121/TMP123 are very similar; main differences are 4 wire SPI inter- +face (read only) and 13-bit temperature data (0.0625 degrees celsius reso- +lution). + Thanks to --------- Jean Delvare <khali@linux-fr.org> for mentoring the hwmon-side driver diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 400620741290..a13680871bc7 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -164,7 +164,7 @@ configured individually according to the following options. temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the bahaviour of fans. Write 1 to let fans spinning at + the behaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245 new file mode 100644 index 000000000000..bae7a3adc5d8 --- /dev/null +++ b/Documentation/hwmon/ltc4245 @@ -0,0 +1,81 @@ +Kernel driver ltc4245 +===================== + +Supported chips: + * Linear Technology LTC4245 + Prefix: 'ltc4245' + Addresses scanned: 0x20-0x3f + Datasheet: + http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + +Author: Ira W. Snyder <iws@ovro.caltech.edu> + + +Description +----------- + +The LTC4245 controller allows a board to be safely inserted and removed +from a live backplane in multiple supply systems such as CompactPCI and +PCI Express. + + +Usage Notes +----------- + +This driver does not probe for LTC4245 devices, due to the fact that some +of the possible addresses are unfriendly to probing. You will need to use +the "force" parameter to tell the driver where to find the device. + +Example: the following will load the driver for an LTC4245 at address 0x23 +on I2C bus #1: +$ modprobe ltc4245 force=1,0x23 + + +Sysfs entries +------------- + +The LTC4245 has built-in limits for over and under current warnings. This +makes it very likely that the reference circuit will be used. + +This driver uses the values in the datasheet to change the register values +into the values specified in the sysfs-interface document. The current readings +rely on the sense resistors listed in Table 2: "Sense Resistor Values". + +in1_input 12v input voltage (mV) +in2_input 5v input voltage (mV) +in3_input 3v input voltage (mV) +in4_input Vee (-12v) input voltage (mV) + +in1_min_alarm 12v input undervoltage alarm +in2_min_alarm 5v input undervoltage alarm +in3_min_alarm 3v input undervoltage alarm +in4_min_alarm Vee (-12v) input undervoltage alarm + +curr1_input 12v current (mA) +curr2_input 5v current (mA) +curr3_input 3v current (mA) +curr4_input Vee (-12v) current (mA) + +curr1_max_alarm 12v overcurrent alarm +curr2_max_alarm 5v overcurrent alarm +curr3_max_alarm 3v overcurrent alarm +curr4_max_alarm Vee (-12v) overcurrent alarm + +in5_input 12v output voltage (mV) +in6_input 5v output voltage (mV) +in7_input 3v output voltage (mV) +in8_input Vee (-12v) output voltage (mV) + +in5_min_alarm 12v output undervoltage alarm +in6_min_alarm 5v output undervoltage alarm +in7_min_alarm 3v output undervoltage alarm +in8_min_alarm Vee (-12v) output undervoltage alarm + +in9_input GPIO #1 voltage data +in10_input GPIO #2 voltage data +in11_input GPIO #3 voltage data + +power1_input 12v power usage (mW) +power2_input 5v power usage (mW) +power3_input 3v power usage (mW) +power4_input Vee (-12v) power usage (mW) diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp index 154bd02220b9..34a9cfd746bd 100644 --- a/Documentation/spi/spi-lm70llp +++ b/Documentation/spi/spi-lm70llp @@ -13,10 +13,20 @@ Description This driver provides glue code connecting a National Semiconductor LM70 LLP temperature sensor evaluation board to the kernel's SPI core subsystem. +This is a SPI master controller driver. It can be used in conjunction with +(layered under) the LM70 logical driver (a "SPI protocol driver"). In effect, this driver turns the parallel port interface on the eval board into a SPI bus with a single device, which will be driven by the generic LM70 driver (drivers/hwmon/lm70.c). + +Hardware Interfacing +-------------------- +The schematic for this particular board (the LM70EVAL-LLP) is +available (on page 4) here: + + http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + The hardware interfacing on the LM70 LLP eval board is as follows: Parallel LM70 LLP diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c709e821f04b..4b33bc82cc24 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -284,11 +284,12 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71882FG and F71883FG" + tristate "Fintek F71862FG, F71882FG and F8000" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71882FG and F71883FG Super-I/O chips. + features of the Fintek F71882FG/F71883FG, F71862FG/71863FG + and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71882fg. @@ -304,9 +305,13 @@ config SENSORS_F75375S will be called f75375s. config SENSORS_FSCHER - tristate "FSC Hermes" + tristate "FSC Hermes (DEPRECATED)" depends on X86 && I2C help + This driver is DEPRECATED please use the new merged fschmd + ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver + instead. + If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -314,9 +319,13 @@ config SENSORS_FSCHER will be called fscher. config SENSORS_FSCPOS - tristate "FSC Poseidon" + tristate "FSC Poseidon (DEPRECATED)" depends on X86 && I2C help + This driver is DEPRECATED please use the new merged fschmd + ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver + instead. + If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -325,14 +334,15 @@ config SENSORS_FSCPOS config SENSORS_FSCHMD tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" - depends on X86 && I2C && EXPERIMENTAL + depends on X86 && I2C help If you say yes here you get support for various Fujitsu Siemens - Computers sensor chips. + Computers sensor chips, including support for the integrated + watchdog. - This is a new merged driver for FSC sensor chips which is intended - as a replacment for the fscpos, fscscy and fscher drivers and adds - support for several other FCS sensor chips. + This is a merged driver for FSC sensor chips replacing the fscpos, + fscscy and fscher drivers and adding support for several other FSC + sensor chips. This driver can also be built as a module. If so, the module will be called fschmd. @@ -399,7 +409,8 @@ config SENSORS_IT87 select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone. + IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the + SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. @@ -417,11 +428,12 @@ config SENSORS_LM63 will be called lm63. config SENSORS_LM70 - tristate "National Semiconductor LM70" + tristate "National Semiconductor LM70 / Texas Instruments TMP121" depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor - LM70 digital temperature sensor chip. + LM70 and Texas Instruments TMP121/TMP123 digital temperature + sensor chips. This driver can also be built as a module. If so, the module will be called lm70. @@ -548,6 +560,17 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + config SENSORS_MAX1111 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" depends on SPI_MASTER diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 58fc5be5355d..8fd124eff646 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_LM87) += lm87.o obj-$(CONFIG_SENSORS_LM90) += lm90.o obj-$(CONFIG_SENSORS_LM92) += lm92.o obj-$(CONFIG_SENSORS_LM93) += lm93.o +obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o obj-$(CONFIG_SENSORS_MAX1111) += max1111.o obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6650) += max6650.o diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 8a45a2e6ba8a..8acf82977e7b 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -53,7 +53,10 @@ static const unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(asb100); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); /* Voltage IN registers 0-6 */ diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 27a5d397f9a1..3df202a9ad72 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -34,6 +34,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> /* ISA device, if found */ @@ -2361,6 +2362,10 @@ static int __init dme1737_isa_device_add(unsigned short addr) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + if (!(pdev = platform_device_alloc("dme1737", addr))) { printk(KERN_ERR "dme1737: Failed to allocate device.\n"); err = -ENOMEM; diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 7a14a2dbb752..899876579253 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -39,6 +39,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -1455,6 +1456,10 @@ static int __init f71805f_device_add(unsigned short address, } res.name = pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed " diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 67067e9a323e..609cafff86bc 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -1,6 +1,6 @@ /*************************************************************************** * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * - * Copyright (C) 2007 by Hans de Goede <j.w.r.degoede@hhs.nl> * + * Copyright (C) 2007,2008 by Hans de Goede <hdegoede@redhat.com> * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * @@ -27,11 +27,12 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/acpi.h> #define DRVNAME "f71882fg" -#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device*/ +#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device */ #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ #define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */ @@ -43,7 +44,9 @@ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ +#define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ +#define SIO_F8000_ID 0x0581 /* Chipset ID */ #define REGION_LENGTH 8 #define ADDR_REG_OFFSET 5 @@ -51,25 +54,36 @@ #define F71882FG_REG_PECI 0x0A -#define F71882FG_REG_IN_STATUS 0x12 -#define F71882FG_REG_IN_BEEP 0x13 +#define F71882FG_REG_IN_STATUS 0x12 /* f71882fg only */ +#define F71882FG_REG_IN_BEEP 0x13 /* f71882fg only */ #define F71882FG_REG_IN(nr) (0x20 + (nr)) -#define F71882FG_REG_IN1_HIGH 0x32 +#define F71882FG_REG_IN1_HIGH 0x32 /* f71882fg only */ #define F71882FG_REG_FAN(nr) (0xA0 + (16 * (nr))) +#define F71882FG_REG_FAN_TARGET(nr) (0xA2 + (16 * (nr))) +#define F71882FG_REG_FAN_FULL_SPEED(nr) (0xA4 + (16 * (nr))) #define F71882FG_REG_FAN_STATUS 0x92 #define F71882FG_REG_FAN_BEEP 0x93 -#define F71882FG_REG_TEMP(nr) (0x72 + 2 * (nr)) -#define F71882FG_REG_TEMP_OVT(nr) (0x82 + 2 * (nr)) -#define F71882FG_REG_TEMP_HIGH(nr) (0x83 + 2 * (nr)) +#define F71882FG_REG_TEMP(nr) (0x70 + 2 * (nr)) +#define F71882FG_REG_TEMP_OVT(nr) (0x80 + 2 * (nr)) +#define F71882FG_REG_TEMP_HIGH(nr) (0x81 + 2 * (nr)) #define F71882FG_REG_TEMP_STATUS 0x62 #define F71882FG_REG_TEMP_BEEP 0x63 -#define F71882FG_REG_TEMP_HYST1 0x6C -#define F71882FG_REG_TEMP_HYST23 0x6D +#define F71882FG_REG_TEMP_HYST(nr) (0x6C + (nr)) #define F71882FG_REG_TEMP_TYPE 0x6B #define F71882FG_REG_TEMP_DIODE_OPEN 0x6F +#define F71882FG_REG_PWM(nr) (0xA3 + (16 * (nr))) +#define F71882FG_REG_PWM_TYPE 0x94 +#define F71882FG_REG_PWM_ENABLE 0x96 + +#define F71882FG_REG_FAN_HYST(nr) (0x98 + (nr)) + +#define F71882FG_REG_POINT_PWM(pwm, point) (0xAA + (point) + (16 * (pwm))) +#define F71882FG_REG_POINT_TEMP(pwm, point) (0xA6 + (point) + (16 * (pwm))) +#define F71882FG_REG_POINT_MAPPING(nr) (0xAF + 16 * (nr)) + #define F71882FG_REG_START 0x01 #define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */ @@ -78,7 +92,15 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -static struct platform_device *f71882fg_pdev = NULL; +enum chips { f71862fg, f71882fg, f8000 }; + +static const char *f71882fg_names[] = { + "f71862fg", + "f71882fg", + "f8000", +}; + +static struct platform_device *f71882fg_pdev; /* Super-I/O Function prototypes */ static inline int superio_inb(int base, int reg); @@ -87,8 +109,13 @@ static inline void superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); +struct f71882fg_sio_data { + enum chips type; +}; + struct f71882fg_data { unsigned short addr; + enum chips type; struct device *hwmon_dev; struct mutex update_lock; @@ -102,19 +129,30 @@ struct f71882fg_data { u8 in_status; u8 in_beep; u16 fan[4]; + u16 fan_target[4]; + u16 fan_full_speed[4]; u8 fan_status; u8 fan_beep; - u8 temp[3]; - u8 temp_ovt[3]; - u8 temp_high[3]; - u8 temp_hyst[3]; - u8 temp_type[3]; + /* Note: all models have only 3 temperature channels, but on some + they are addressed as 0-2 and on others as 1-3, so for coding + convenience we reserve space for 4 channels */ + u8 temp[4]; + u8 temp_ovt[4]; + u8 temp_high[4]; + u8 temp_hyst[2]; /* 2 hysts stored per reg */ + u8 temp_type[4]; u8 temp_status; u8 temp_beep; u8 temp_diode_open; + u8 pwm[4]; + u8 pwm_enable; + u8 pwm_auto_point_hyst[2]; + u8 pwm_auto_point_mapping[4]; + u8 pwm_auto_point_pwm[4][5]; + u8 pwm_auto_point_temp[4][4]; }; -/* Sysfs in*/ +/* Sysfs in */ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf); static ssize_t show_in_max(struct device *dev, struct device_attribute @@ -130,6 +168,10 @@ static ssize_t show_in_alarm(struct device *dev, struct device_attribute /* Sysfs Fan */ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf); +static ssize_t show_fan_full_speed(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_fan_full_speed(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); static ssize_t show_fan_beep(struct device *dev, struct device_attribute *devattr, char *buf); static ssize_t store_fan_beep(struct device *dev, struct device_attribute @@ -163,16 +205,41 @@ static ssize_t show_temp_alarm(struct device *dev, struct device_attribute *devattr, char *buf); static ssize_t show_temp_fault(struct device *dev, struct device_attribute *devattr, char *buf); +/* PWM and Auto point control */ +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf); +static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count); +static ssize_t show_pwm_enable(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_enable(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); +static ssize_t show_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t store_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count); /* Sysfs misc */ static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf); static int __devinit f71882fg_probe(struct platform_device * pdev); -static int __devexit f71882fg_remove(struct platform_device *pdev); -static int __init f71882fg_init(void); -static int __init f71882fg_find(int sioaddr, unsigned short *address); -static int __init f71882fg_device_add(unsigned short address); -static void __exit f71882fg_exit(void); +static int f71882fg_remove(struct platform_device *pdev); static struct platform_driver f71882fg_driver = { .driver = { @@ -183,86 +250,531 @@ static struct platform_driver f71882fg_driver = { .remove = __devexit_p(f71882fg_remove), }; -static struct device_attribute f71882fg_dev_attr[] = -{ - __ATTR( name, S_IRUGO, show_name, NULL ), +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +/* Temp and in attr common to both the f71862fg and f71882fg */ +static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = { + SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), + SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), + SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), + SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3), + SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4), + SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5), + SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6), + SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7), + SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8), + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1), + SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 1), + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0, 1), + /* Should really be temp1_max_alarm, but older versions did not handle + the max and crit alarms separately and lm_sensors v2 depends on the + presence of temp#_alarm files. The same goes for temp2/3 _alarm. */ + SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1), + SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 1), + SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 1), + SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, + 0, 1), + SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), + SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 5), + SENSOR_ATTR_2(temp1_type, S_IRUGO, show_temp_type, NULL, 0, 1), + SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 1), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 2), + SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 2), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0, 2), + /* Should be temp2_max_alarm, see temp1_alarm note */ + SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2), + SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 2), + SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 2), + SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, + 0, 2), + SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), + SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 6), + SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2), + SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), + SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3), + SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 3), + SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, + store_temp_max_hyst, 0, 3), + /* Should be temp3_max_alarm, see temp1_alarm note */ + SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 3), + SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 3), + SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 3), + SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, + 0, 3), + SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 7), + SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep, + store_temp_beep, 0, 7), + SENSOR_ATTR_2(temp3_type, S_IRUGO, show_temp_type, NULL, 0, 3), + SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3), +}; + +/* Temp and in attr found only on the f71882fg */ +static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = { + SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, + 0, 1), + SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, + 0, 1), + SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1), +}; + +/* Temp and in attr for the f8000 + Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max) + is used as hysteresis value to clear alarms + */ +static struct sensor_device_attribute_2 f8000_in_temp_attr[] = { + SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), + SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), + SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), + SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0), + SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 0), + SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 0), + SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4), + SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1), + SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 1), + SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 1), + SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5), + SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1), + SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2), + SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit, + store_temp_crit, 0, 2), + SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max, + store_temp_max, 0, 2), + SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6), +}; + +/* Fan / PWM attr common to all models */ +static struct sensor_device_attribute_2 fxxxx_fan_attr[] = { + SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0), + SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 0), + SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0), + SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1), + SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 1), + SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1), + SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2), + SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 2), + SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2), + + SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0), + SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 0), + SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 0), + SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 0), + + SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1), + SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 1), + SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 1), + SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 1), + + SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 2), + SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 2), }; -static struct sensor_device_attribute f71882fg_in_temp_attr[] = -{ - SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), - SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), - SENSOR_ATTR(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, 1), - SENSOR_ATTR(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, 1), - SENSOR_ATTR(in1_alarm, S_IRUGO, show_in_alarm, NULL, 1), - SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), - SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), - SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), - SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), - SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), - SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), - SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8), - SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0), - SENSOR_ATTR(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, - store_temp_max, 0), - SENSOR_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 0), - SENSOR_ATTR(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit, - store_temp_crit, 0), - SENSOR_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 0), - SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0), - SENSOR_ATTR(temp1_beep, S_IRUGO|S_IWUSR, show_temp_beep, - store_temp_beep, 0), - SENSOR_ATTR(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0), - SENSOR_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0), - SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1), - SENSOR_ATTR(temp2_max, S_IRUGO|S_IWUSR, show_temp_max, - store_temp_max, 1), - SENSOR_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 1), - SENSOR_ATTR(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit, - store_temp_crit, 1), - SENSOR_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1), - SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1), - SENSOR_ATTR(temp2_beep, S_IRUGO|S_IWUSR, show_temp_beep, - store_temp_beep, 1), - SENSOR_ATTR(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 1), - SENSOR_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1), - SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2), - SENSOR_ATTR(temp3_max, S_IRUGO|S_IWUSR, show_temp_max, - store_temp_max, 2), - SENSOR_ATTR(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, - store_temp_max_hyst, 2), - SENSOR_ATTR(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit, - store_temp_crit, 2), - SENSOR_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 2), - SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2), - SENSOR_ATTR(temp3_beep, S_IRUGO|S_IWUSR, show_temp_beep, - store_temp_beep, 2), - SENSOR_ATTR(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 2), - SENSOR_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2) +/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the + f71882fg */ +static struct sensor_device_attribute_2 f71862fg_fan_attr[] = { + SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 0), + SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 1), + SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 2), + + SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 0), + SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 0), + + SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 1), + SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 1), + + SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2), + SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 2), + SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 2), + SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 2), }; -static struct sensor_device_attribute f71882fg_fan_attr[] = -{ - SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), - SENSOR_ATTR(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 0), - SENSOR_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0), - SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), - SENSOR_ATTR(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 1), - SENSOR_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1), - SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2), - SENSOR_ATTR(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 2), - SENSOR_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2), - SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3), - SENSOR_ATTR(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 3), - SENSOR_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3) +/* Fan / PWM attr for the f71882fg */ +static struct sensor_device_attribute_2 f71882fg_fan_attr[] = { + SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 0), + SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 1), + SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 2), + SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), + SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 3), + SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 3), + SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3), + + SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 0), + SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 0), + SENSOR_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 0), + SENSOR_ATTR_2(pwm1_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 0), + SENSOR_ATTR_2(pwm1_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 0), + SENSOR_ATTR_2(pwm1_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 0), + SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 0), + SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 0), + SENSOR_ATTR_2(pwm1_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 0), + SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 0), + + SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 1), + SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 1), + SENSOR_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 1), + SENSOR_ATTR_2(pwm2_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 1), + SENSOR_ATTR_2(pwm2_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 1), + SENSOR_ATTR_2(pwm2_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 1), + SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 1), + SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 1), + SENSOR_ATTR_2(pwm2_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 1), + SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 1), + + SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2), + SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 2), + SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 2), + SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 2), + SENSOR_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 2), + SENSOR_ATTR_2(pwm3_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 2), + SENSOR_ATTR_2(pwm3_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 2), + SENSOR_ATTR_2(pwm3_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 2), + SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 2), + SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 2), + SENSOR_ATTR_2(pwm3_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 2), + SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 2), + + SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3), + SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 3), + SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 3), + SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 3), + SENSOR_ATTR_2(pwm4_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 3), + SENSOR_ATTR_2(pwm4_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 3), + SENSOR_ATTR_2(pwm4_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 3), + SENSOR_ATTR_2(pwm4_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 3), + SENSOR_ATTR_2(pwm4_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 3), + SENSOR_ATTR_2(pwm4_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 3), + SENSOR_ATTR_2(pwm4_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 3), + SENSOR_ATTR_2(pwm4_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 3), + SENSOR_ATTR_2(pwm4_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 3), + SENSOR_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 3), + SENSOR_ATTR_2(pwm4_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 3), + SENSOR_ATTR_2(pwm4_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 3), + SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 3), }; +/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm! + Also the register block at offset A0 maps to TEMP1 (so our temp2, as the + F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */ +static struct sensor_device_attribute_2 f8000_fan_attr[] = { + SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), + + SENSOR_ATTR_2(pwm3, S_IRUGO, show_pwm, NULL, 0, 2), + + SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 2), + SENSOR_ATTR_2(temp1_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 2), + SENSOR_ATTR_2(temp1_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 2), + SENSOR_ATTR_2(temp1_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 2), + SENSOR_ATTR_2(temp1_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 2), + SENSOR_ATTR_2(temp1_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 2), + SENSOR_ATTR_2(temp1_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 2), + SENSOR_ATTR_2(temp1_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 2), + SENSOR_ATTR_2(temp1_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 2), + SENSOR_ATTR_2(temp1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 2), + SENSOR_ATTR_2(temp1_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 2), + SENSOR_ATTR_2(temp1_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 2), + SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 2), + + SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 0), + SENSOR_ATTR_2(temp2_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 0), + SENSOR_ATTR_2(temp2_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 0), + SENSOR_ATTR_2(temp2_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 0), + SENSOR_ATTR_2(temp2_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 0), + SENSOR_ATTR_2(temp2_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 0), + SENSOR_ATTR_2(temp2_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 0), + SENSOR_ATTR_2(temp2_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 0), + SENSOR_ATTR_2(temp2_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 0), + SENSOR_ATTR_2(temp2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 0), + SENSOR_ATTR_2(temp2_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 0), + SENSOR_ATTR_2(temp2_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 0), + SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 0), + + SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 0, 1), + SENSOR_ATTR_2(temp3_auto_point2_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 1, 1), + SENSOR_ATTR_2(temp3_auto_point3_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 2, 1), + SENSOR_ATTR_2(temp3_auto_point4_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 3, 1), + SENSOR_ATTR_2(temp3_auto_point5_pwm, S_IRUGO|S_IWUSR, + show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, + 4, 1), + SENSOR_ATTR_2(temp3_auto_point1_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 0, 1), + SENSOR_ATTR_2(temp3_auto_point2_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 1, 1), + SENSOR_ATTR_2(temp3_auto_point3_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 2, 1), + SENSOR_ATTR_2(temp3_auto_point4_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp, store_pwm_auto_point_temp, + 3, 1), + SENSOR_ATTR_2(temp3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR, + show_pwm_auto_point_temp_hyst, + store_pwm_auto_point_temp_hyst, + 0, 1), + SENSOR_ATTR_2(temp3_auto_point2_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 1, 1), + SENSOR_ATTR_2(temp3_auto_point3_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 2, 1), + SENSOR_ATTR_2(temp3_auto_point4_temp_hyst, S_IRUGO, + show_pwm_auto_point_temp_hyst, NULL, 3, 1), +}; /* Super I/O functions */ static inline int superio_inb(int base, int reg) @@ -299,11 +811,16 @@ static inline void superio_exit(int base) outb(SIO_LOCK_KEY, base); } -static inline u16 fan_from_reg(u16 reg) +static inline int fan_from_reg(u16 reg) { return reg ? (1500000 / reg) : 0; } +static inline u16 fan_to_reg(int fan) +{ + return fan ? (1500000 / fan) : 0; +} + static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg) { u8 val; @@ -332,52 +849,111 @@ static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val) outb(val, data->addr + DATA_REG_OFFSET); } -static struct f71882fg_data *f71882fg_update_device(struct device * dev) +static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val) +{ + outb(reg++, data->addr + ADDR_REG_OFFSET); + outb(val >> 8, data->addr + DATA_REG_OFFSET); + outb(reg, data->addr + ADDR_REG_OFFSET); + outb(val & 255, data->addr + DATA_REG_OFFSET); +} + +static struct f71882fg_data *f71882fg_update_device(struct device *dev) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr, reg, reg2; + int nr, reg = 0, reg2; + int nr_fans = (data->type == f71882fg) ? 4 : 3; + int nr_ins = (data->type == f8000) ? 3 : 9; + int temp_start = (data->type == f8000) ? 0 : 1; mutex_lock(&data->update_lock); /* Update once every 60 seconds */ if ( time_after(jiffies, data->last_limits + 60 * HZ ) || !data->valid) { - data->in1_max = f71882fg_read8(data, F71882FG_REG_IN1_HIGH); - data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); + if (data->type == f71882fg) { + data->in1_max = + f71882fg_read8(data, F71882FG_REG_IN1_HIGH); + data->in_beep = + f71882fg_read8(data, F71882FG_REG_IN_BEEP); + } /* Get High & boundary temps*/ - for (nr = 0; nr < 3; nr++) { + for (nr = temp_start; nr < 3 + temp_start; nr++) { data->temp_ovt[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_OVT(nr)); data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr)); } - /* Have to hardcode hyst*/ - data->temp_hyst[0] = f71882fg_read8(data, - F71882FG_REG_TEMP_HYST1) >> 4; - /* Hyst temps 2 & 3 stored in same register */ - reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST23); - data->temp_hyst[1] = reg & 0x0F; - data->temp_hyst[2] = reg >> 4; - - /* Have to hardcode type, because temp1 is special */ - reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); + if (data->type != f8000) { + data->fan_beep = f71882fg_read8(data, + F71882FG_REG_FAN_BEEP); + data->temp_beep = f71882fg_read8(data, + F71882FG_REG_TEMP_BEEP); + data->temp_hyst[0] = f71882fg_read8(data, + F71882FG_REG_TEMP_HYST(0)); + data->temp_hyst[1] = f71882fg_read8(data, + F71882FG_REG_TEMP_HYST(1)); + /* Have to hardcode type, because temp1 is special */ + reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); + data->temp_type[2] = (reg & 0x04) ? 2 : 4; + data->temp_type[3] = (reg & 0x08) ? 2 : 4; + } reg2 = f71882fg_read8(data, F71882FG_REG_PECI); if ((reg2 & 0x03) == 0x01) - data->temp_type[0] = 6 /* PECI */; + data->temp_type[1] = 6 /* PECI */; else if ((reg2 & 0x03) == 0x02) - data->temp_type[0] = 5 /* AMDSI */; + data->temp_type[1] = 5 /* AMDSI */; + else if (data->type != f8000) + data->temp_type[1] = (reg & 0x02) ? 2 : 4; else - data->temp_type[0] = (reg & 0x02) ? 2 : 4; - - data->temp_type[1] = (reg & 0x04) ? 2 : 4; - data->temp_type[2] = (reg & 0x08) ? 2 : 4; - - data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP); - - data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP); - + data->temp_type[1] = 2; /* F8000 only supports BJT */ + + data->pwm_enable = f71882fg_read8(data, + F71882FG_REG_PWM_ENABLE); + data->pwm_auto_point_hyst[0] = + f71882fg_read8(data, F71882FG_REG_FAN_HYST(0)); + data->pwm_auto_point_hyst[1] = + f71882fg_read8(data, F71882FG_REG_FAN_HYST(1)); + + for (nr = 0; nr < nr_fans; nr++) { + data->pwm_auto_point_mapping[nr] = + f71882fg_read8(data, + F71882FG_REG_POINT_MAPPING(nr)); + + if (data->type != f71862fg) { + int point; + for (point = 0; point < 5; point++) { + data->pwm_auto_point_pwm[nr][point] = + f71882fg_read8(data, + F71882FG_REG_POINT_PWM + (nr, point)); + } + for (point = 0; point < 4; point++) { + data->pwm_auto_point_temp[nr][point] = + f71882fg_read8(data, + F71882FG_REG_POINT_TEMP + (nr, point)); + } + } else { + data->pwm_auto_point_pwm[nr][1] = + f71882fg_read8(data, + F71882FG_REG_POINT_PWM + (nr, 1)); + data->pwm_auto_point_pwm[nr][4] = + f71882fg_read8(data, + F71882FG_REG_POINT_PWM + (nr, 4)); + data->pwm_auto_point_temp[nr][0] = + f71882fg_read8(data, + F71882FG_REG_POINT_TEMP + (nr, 0)); + data->pwm_auto_point_temp[nr][3] = + f71882fg_read8(data, + F71882FG_REG_POINT_TEMP + (nr, 3)); + } + } data->last_limits = jiffies; } @@ -387,19 +963,32 @@ static struct f71882fg_data *f71882fg_update_device(struct device * dev) F71882FG_REG_TEMP_STATUS); data->temp_diode_open = f71882fg_read8(data, F71882FG_REG_TEMP_DIODE_OPEN); - for (nr = 0; nr < 3; nr++) + for (nr = temp_start; nr < 3 + temp_start; nr++) data->temp[nr] = f71882fg_read8(data, F71882FG_REG_TEMP(nr)); data->fan_status = f71882fg_read8(data, F71882FG_REG_FAN_STATUS); - for (nr = 0; nr < 4; nr++) + for (nr = 0; nr < nr_fans; nr++) { data->fan[nr] = f71882fg_read16(data, F71882FG_REG_FAN(nr)); + data->fan_target[nr] = + f71882fg_read16(data, F71882FG_REG_FAN_TARGET(nr)); + data->fan_full_speed[nr] = + f71882fg_read16(data, + F71882FG_REG_FAN_FULL_SPEED(nr)); + data->pwm[nr] = + f71882fg_read8(data, F71882FG_REG_PWM(nr)); + } - data->in_status = f71882fg_read8(data, + /* The f8000 can monitor 1 more fan, but has no pwm for it */ + if (data->type == f8000) + data->fan[3] = f71882fg_read16(data, + F71882FG_REG_FAN(3)); + if (data->type == f71882fg) + data->in_status = f71882fg_read8(data, F71882FG_REG_IN_STATUS); - for (nr = 0; nr < 9; nr++) + for (nr = 0; nr < nr_ins; nr++) data->in[nr] = f71882fg_read8(data, F71882FG_REG_IN(nr)); @@ -417,7 +1006,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; int speed = fan_from_reg(data->fan[nr]); if (speed == FAN_MIN_DETECT) @@ -426,11 +1015,39 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, return sprintf(buf, "%d\n", speed); } +static ssize_t show_fan_full_speed(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int speed = fan_from_reg(data->fan_full_speed[nr]); + return sprintf(buf, "%d\n", speed); +} + +static ssize_t store_fan_full_speed(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10); + + val = SENSORS_LIMIT(val, 23, 1500000); + val = fan_to_reg(val); + + mutex_lock(&data->update_lock); + f71882fg_write16(data, F71882FG_REG_FAN_FULL_SPEED(nr), val); + data->fan_full_speed[nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + static ssize_t show_fan_beep(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->fan_beep & (1 << nr)) return sprintf(buf, "1\n"); @@ -442,10 +1059,11 @@ static ssize_t store_fan_beep(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); + data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP); if (val) data->fan_beep |= 1 << nr; else @@ -461,7 +1079,7 @@ static ssize_t show_fan_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->fan_status & (1 << nr)) return sprintf(buf, "1\n"); @@ -473,7 +1091,7 @@ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->in[nr] * 8); } @@ -490,10 +1108,8 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int val = simple_strtoul(buf, NULL, 10) / 8; - - if (val > 255) - val = 255; + long val = simple_strtol(buf, NULL, 10) / 8; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val); @@ -507,7 +1123,7 @@ static ssize_t show_in_beep(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->in_beep & (1 << nr)) return sprintf(buf, "1\n"); @@ -519,10 +1135,11 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); + data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP); if (val) data->in_beep |= 1 << nr; else @@ -538,7 +1155,7 @@ static ssize_t show_in_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; if (data->in_status & (1 << nr)) return sprintf(buf, "1\n"); @@ -550,7 +1167,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp[nr] * 1000); } @@ -559,7 +1176,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp_high[nr] * 1000); } @@ -568,11 +1185,9 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10) / 1000; - - if (val > 255) - val = 255; + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10) / 1000; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_TEMP_HIGH(nr), val); @@ -586,48 +1201,46 @@ static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_max_hyst; + + mutex_lock(&data->update_lock); + if (nr & 1) + temp_max_hyst = data->temp_hyst[nr / 2] >> 4; + else + temp_max_hyst = data->temp_hyst[nr / 2] & 0x0f; + temp_max_hyst = (data->temp_high[nr] - temp_max_hyst) * 1000; + mutex_unlock(&data->update_lock); - return sprintf(buf, "%d\n", - (data->temp_high[nr] - data->temp_hyst[nr]) * 1000); + return sprintf(buf, "%d\n", temp_max_hyst); } static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10) / 1000; + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10) / 1000; ssize_t ret = count; + u8 reg; mutex_lock(&data->update_lock); /* convert abs to relative and check */ + data->temp_high[nr] = f71882fg_read8(data, F71882FG_REG_TEMP_HIGH(nr)); + val = SENSORS_LIMIT(val, data->temp_high[nr] - 15, + data->temp_high[nr]); val = data->temp_high[nr] - val; - if (val < 0 || val > 15) { - ret = -EINVAL; - goto store_temp_max_hyst_exit; - } - - data->temp_hyst[nr] = val; /* convert value to register contents */ - switch (nr) { - case 0: - val = val << 4; - break; - case 1: - val = val | (data->temp_hyst[2] << 4); - break; - case 2: - val = data->temp_hyst[1] | (val << 4); - break; - } - - f71882fg_write8(data, nr ? F71882FG_REG_TEMP_HYST23 : - F71882FG_REG_TEMP_HYST1, val); + reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST(nr / 2)); + if (nr & 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + f71882fg_write8(data, F71882FG_REG_TEMP_HYST(nr / 2), reg); + data->temp_hyst[nr / 2] = reg; -store_temp_max_hyst_exit: mutex_unlock(&data->update_lock); return ret; } @@ -636,7 +1249,7 @@ static ssize_t show_temp_crit(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp_ovt[nr] * 1000); } @@ -645,11 +1258,9 @@ static ssize_t store_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10) / 1000; - - if (val > 255) - val = 255; + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10) / 1000; + val = SENSORS_LIMIT(val, 0, 255); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_TEMP_OVT(nr), val); @@ -663,17 +1274,25 @@ static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_crit_hyst; + + mutex_lock(&data->update_lock); + if (nr & 1) + temp_crit_hyst = data->temp_hyst[nr / 2] >> 4; + else + temp_crit_hyst = data->temp_hyst[nr / 2] & 0x0f; + temp_crit_hyst = (data->temp_ovt[nr] - temp_crit_hyst) * 1000; + mutex_unlock(&data->update_lock); - return sprintf(buf, "%d\n", - (data->temp_ovt[nr] - data->temp_hyst[nr]) * 1000); + return sprintf(buf, "%d\n", temp_crit_hyst); } static ssize_t show_temp_type(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; return sprintf(buf, "%d\n", data->temp_type[nr]); } @@ -682,9 +1301,9 @@ static ssize_t show_temp_beep(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; - if (data->temp_beep & (1 << (nr + 1))) + if (data->temp_beep & (1 << nr)) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -694,14 +1313,15 @@ static ssize_t store_temp_beep(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct f71882fg_data *data = dev_get_drvdata(dev); - int nr = to_sensor_dev_attr(devattr)->index; - int val = simple_strtoul(buf, NULL, 10); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); + data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP); if (val) - data->temp_beep |= 1 << (nr + 1); + data->temp_beep |= 1 << nr; else - data->temp_beep &= ~(1 << (nr + 1)); + data->temp_beep &= ~(1 << nr); f71882fg_write8(data, F71882FG_REG_TEMP_BEEP, data->temp_beep); mutex_unlock(&data->update_lock); @@ -713,9 +1333,9 @@ static ssize_t show_temp_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; - if (data->temp_status & (1 << (nr + 1))) + if (data->temp_status & (1 << nr)) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -725,113 +1345,528 @@ static ssize_t show_temp_fault(struct device *dev, struct device_attribute *devattr, char *buf) { struct f71882fg_data *data = f71882fg_update_device(dev); - int nr = to_sensor_dev_attr(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->index; - if (data->temp_diode_open & (1 << (nr + 1))) + if (data->temp_diode_open & (1 << nr)) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); } +static ssize_t show_pwm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct f71882fg_data *data = f71882fg_update_device(dev); + int val, nr = to_sensor_dev_attr_2(devattr)->index; + mutex_lock(&data->update_lock); + if (data->pwm_enable & (1 << (2 * nr))) + /* PWM mode */ + val = data->pwm[nr]; + else { + /* RPM mode */ + val = 255 * fan_from_reg(data->fan_target[nr]) + / fan_from_reg(data->fan_full_speed[nr]); + } + mutex_unlock(&data->update_lock); + return sprintf(buf, "%d\n", val); +} + +static ssize_t store_pwm(struct device *dev, + struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, 0, 255); + + mutex_lock(&data->update_lock); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + if ((data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 3) != 2) || + (data->type != f8000 && !((data->pwm_enable >> 2 * nr) & 2))) { + count = -EROFS; + goto leave; + } + if (data->pwm_enable & (1 << (2 * nr))) { + /* PWM mode */ + f71882fg_write8(data, F71882FG_REG_PWM(nr), val); + data->pwm[nr] = val; + } else { + /* RPM mode */ + int target, full_speed; + full_speed = f71882fg_read16(data, + F71882FG_REG_FAN_FULL_SPEED(nr)); + target = fan_to_reg(val * fan_from_reg(full_speed) / 255); + f71882fg_write16(data, F71882FG_REG_FAN_TARGET(nr), target); + data->fan_target[nr] = target; + data->fan_full_speed[nr] = full_speed; + } +leave: + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_enable(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int result = 0; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + + switch ((data->pwm_enable >> 2 * nr) & 3) { + case 0: + case 1: + result = 2; /* Normal auto mode */ + break; + case 2: + result = 1; /* Manual mode */ + break; + case 3: + if (data->type == f8000) + result = 3; /* Thermostat mode */ + else + result = 1; /* Manual mode */ + break; + } + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_enable(struct device *dev, struct device_attribute + *devattr, const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + /* Special case for F8000 auto PWM mode / Thermostat mode */ + if (data->type == f8000 && ((data->pwm_enable >> 2 * nr) & 1)) { + switch (val) { + case 2: + data->pwm_enable &= ~(2 << (2 * nr)); + break; /* Normal auto mode */ + case 3: + data->pwm_enable |= 2 << (2 * nr); + break; /* Thermostat mode */ + default: + count = -EINVAL; + goto leave; + } + } else { + switch (val) { + case 1: + data->pwm_enable |= 2 << (2 * nr); + break; /* Manual */ + case 2: + data->pwm_enable &= ~(2 << (2 * nr)); + break; /* Normal auto mode */ + default: + count = -EINVAL; + goto leave; + } + } + f71882fg_write8(data, F71882FG_REG_PWM_ENABLE, data->pwm_enable); +leave: + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + + mutex_lock(&data->update_lock); + if (data->pwm_enable & (1 << (2 * pwm))) { + /* PWM mode */ + result = data->pwm_auto_point_pwm[pwm][point]; + } else { + /* RPM mode */ + result = 32 * 255 / (32 + data->pwm_auto_point_pwm[pwm][point]); + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_auto_point_pwm(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + long val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, 0, 255); + + mutex_lock(&data->update_lock); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + if (data->pwm_enable & (1 << (2 * pwm))) { + /* PWM mode */ + } else { + /* RPM mode */ + if (val < 29) /* Prevent negative numbers */ + val = 255; + else + val = (255 - val) * 32 / val; + } + f71882fg_write8(data, F71882FG_REG_POINT_PWM(pwm, point), val); + data->pwm_auto_point_pwm[pwm][point] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result = 0; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + + mutex_lock(&data->update_lock); + if (nr & 1) + result = data->pwm_auto_point_hyst[nr / 2] >> 4; + else + result = data->pwm_auto_point_hyst[nr / 2] & 0x0f; + result = 1000 * (data->pwm_auto_point_temp[nr][point] - result); + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + long val = simple_strtol(buf, NULL, 10) / 1000; + u8 reg; + + mutex_lock(&data->update_lock); + data->pwm_auto_point_temp[nr][point] = + f71882fg_read8(data, F71882FG_REG_POINT_TEMP(nr, point)); + val = SENSORS_LIMIT(val, data->pwm_auto_point_temp[nr][point] - 15, + data->pwm_auto_point_temp[nr][point]); + val = data->pwm_auto_point_temp[nr][point] - val; + + reg = f71882fg_read8(data, F71882FG_REG_FAN_HYST(nr / 2)); + if (nr & 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + + f71882fg_write8(data, F71882FG_REG_FAN_HYST(nr / 2), reg); + data->pwm_auto_point_hyst[nr / 2] = reg; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + + result = (data->pwm_auto_point_mapping[nr] >> 4) & 1; + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_interpolate(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + unsigned long val = simple_strtoul(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->pwm_auto_point_mapping[nr] = + f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr)); + if (val) + val = data->pwm_auto_point_mapping[nr] | (1 << 4); + else + val = data->pwm_auto_point_mapping[nr] & (~(1 << 4)); + f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val); + data->pwm_auto_point_mapping[nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_start = (data->type == f8000) ? 0 : 1; + + result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start); + + return sprintf(buf, "%d\n", result); +} + +static ssize_t store_pwm_auto_point_channel(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr_2(devattr)->index; + int temp_start = (data->type == f8000) ? 0 : 1; + long val = simple_strtol(buf, NULL, 10); + + switch (val) { + case 1: + val = 0; + break; + case 2: + val = 1; + break; + case 4: + val = 2; + break; + default: + return -EINVAL; + } + val += temp_start; + mutex_lock(&data->update_lock); + data->pwm_auto_point_mapping[nr] = + f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr)); + val = (data->pwm_auto_point_mapping[nr] & 0xfc) | val; + f71882fg_write8(data, F71882FG_REG_POINT_MAPPING(nr), val); + data->pwm_auto_point_mapping[nr] = val; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int result; + struct f71882fg_data *data = f71882fg_update_device(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + + result = data->pwm_auto_point_temp[pwm][point]; + return sprintf(buf, "%d\n", 1000 * result); +} + +static ssize_t store_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct f71882fg_data *data = dev_get_drvdata(dev); + int pwm = to_sensor_dev_attr_2(devattr)->index; + int point = to_sensor_dev_attr_2(devattr)->nr; + long val = simple_strtol(buf, NULL, 10) / 1000; + val = SENSORS_LIMIT(val, 0, 255); + + mutex_lock(&data->update_lock); + f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val); + data->pwm_auto_point_temp[pwm][point] = val; + mutex_unlock(&data->update_lock); + + return count; +} + static ssize_t show_name(struct device *dev, struct device_attribute *devattr, char *buf) { - return sprintf(buf, DRVNAME "\n"); + struct f71882fg_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", f71882fg_names[data->type]); } +static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev, + struct sensor_device_attribute_2 *attr, int count) +{ + int err, i; + + for (i = 0; i < count; i++) { + err = device_create_file(&pdev->dev, &attr[i].dev_attr); + if (err) + return err; + } + return 0; +} -static int __devinit f71882fg_probe(struct platform_device * pdev) +static int __devinit f71882fg_probe(struct platform_device *pdev) { struct f71882fg_data *data; - int err, i; + struct f71882fg_sio_data *sio_data = pdev->dev.platform_data; + int err, i, nr_fans = (sio_data->type == f71882fg) ? 4 : 3; u8 start_reg; - if (!(data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL))) + data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL); + if (!data) return -ENOMEM; data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; + data->type = sio_data->type; mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); - /* Register sysfs interface files */ - for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) { - err = device_create_file(&pdev->dev, &f71882fg_dev_attr[i]); - if (err) - goto exit_unregister_sysfs; + start_reg = f71882fg_read8(data, F71882FG_REG_START); + if (start_reg & 0x04) { + dev_warn(&pdev->dev, "Hardware monitor is powered down\n"); + err = -ENODEV; + goto exit_free; + } + if (!(start_reg & 0x03)) { + dev_warn(&pdev->dev, "Hardware monitoring not activated\n"); + err = -ENODEV; + goto exit_free; } - start_reg = f71882fg_read8(data, F71882FG_REG_START); + data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); + /* If it is a 71862 and the fan / pwm part is enabled sanity check + the pwm settings */ + if (data->type == f71862fg && (start_reg & 0x02)) { + if ((data->pwm_enable & 0x15) != 0x15) { + dev_err(&pdev->dev, + "Invalid (reserved) pwm settings: 0x%02x\n", + (unsigned int)data->pwm_enable); + err = -ENODEV; + goto exit_free; + } + } + + /* Register sysfs interface files */ + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_unregister_sysfs; + if (start_reg & 0x01) { - for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) { - err = device_create_file(&pdev->dev, - &f71882fg_in_temp_attr[i].dev_attr); + switch (data->type) { + case f71882fg: + err = f71882fg_create_sysfs_files(pdev, + f71882fg_in_temp_attr, + ARRAY_SIZE(f71882fg_in_temp_attr)); if (err) goto exit_unregister_sysfs; + /* fall through! */ + case f71862fg: + err = f71882fg_create_sysfs_files(pdev, + f718x2fg_in_temp_attr, + ARRAY_SIZE(f718x2fg_in_temp_attr)); + break; + case f8000: + err = f71882fg_create_sysfs_files(pdev, + f8000_in_temp_attr, + ARRAY_SIZE(f8000_in_temp_attr)); + break; } + if (err) + goto exit_unregister_sysfs; } if (start_reg & 0x02) { - for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) { - err = device_create_file(&pdev->dev, - &f71882fg_fan_attr[i].dev_attr); - if (err) - goto exit_unregister_sysfs; + err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr, + ARRAY_SIZE(fxxxx_fan_attr)); + if (err) + goto exit_unregister_sysfs; + + switch (data->type) { + case f71862fg: + err = f71882fg_create_sysfs_files(pdev, + f71862fg_fan_attr, + ARRAY_SIZE(f71862fg_fan_attr)); + break; + case f71882fg: + err = f71882fg_create_sysfs_files(pdev, + f71882fg_fan_attr, + ARRAY_SIZE(f71882fg_fan_attr)); + break; + case f8000: + err = f71882fg_create_sysfs_files(pdev, + f8000_fan_attr, + ARRAY_SIZE(f8000_fan_attr)); + break; } + if (err) + goto exit_unregister_sysfs; + + for (i = 0; i < nr_fans; i++) + dev_info(&pdev->dev, "Fan: %d is in %s mode\n", i + 1, + (data->pwm_enable & (1 << 2 * i)) ? + "duty-cycle" : "RPM"); } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; goto exit_unregister_sysfs; } return 0; exit_unregister_sysfs: - for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]); - - for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) - device_remove_file(&pdev->dev, - &f71882fg_in_temp_attr[i].dev_attr); - - for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr); - + f71882fg_remove(pdev); /* Will unregister the sysfs files for us */ + return err; /* f71882fg_remove() also frees our data */ +exit_free: kfree(data); - return err; } -static int __devexit f71882fg_remove(struct platform_device *pdev) +static int f71882fg_remove(struct platform_device *pdev) { int i; struct f71882fg_data *data = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); - hwmon_device_unregister(data->hwmon_dev); + if (data->hwmon_dev) + hwmon_device_unregister(data->hwmon_dev); + + /* Note we are not looping over all attr arrays we have as the ones + below are supersets of the ones skipped. */ + device_remove_file(&pdev->dev, &dev_attr_name); - for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]); + for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++) + device_remove_file(&pdev->dev, + &f718x2fg_in_temp_attr[i].dev_attr); for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) device_remove_file(&pdev->dev, &f71882fg_in_temp_attr[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++) + device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++) + device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr); + kfree(data); return 0; } -static int __init f71882fg_find(int sioaddr, unsigned short *address) +static int __init f71882fg_find(int sioaddr, unsigned short *address, + struct f71882fg_sio_data *sio_data) { int err = -ENODEV; u16 devid; - u8 start_reg; - struct f71882fg_data data; superio_enter(sioaddr); @@ -842,7 +1877,17 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address) } devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); - if (devid != SIO_F71882_ID) { + switch (devid) { + case SIO_F71862_ID: + sio_data->type = f71862fg; + break; + case SIO_F71882_ID: + sio_data->type = f71882fg; + break; + case SIO_F8000_ID: + sio_data->type = f8000; + break; + default: printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n"); goto exit; } @@ -861,24 +1906,17 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address) } *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */ - data.addr = *address; - start_reg = f71882fg_read8(&data, F71882FG_REG_START); - if (!(start_reg & 0x03)) { - printk(KERN_WARNING DRVNAME - ": Hardware monitoring not activated\n"); - goto exit; - } - err = 0; - printk(KERN_INFO DRVNAME ": Found F71882FG chip at %#x, revision %d\n", - (unsigned int)*address, + printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n", + f71882fg_names[sio_data->type], (unsigned int)*address, (int)superio_inb(sioaddr, SIO_REG_DEVREV)); exit: superio_exit(sioaddr); return err; } -static int __init f71882fg_device_add(unsigned short address) +static int __init f71882fg_device_add(unsigned short address, + const struct f71882fg_sio_data *sio_data) { struct resource res = { .start = address, @@ -892,12 +1930,23 @@ static int __init f71882fg_device_add(unsigned short address) return -ENOMEM; res.name = f71882fg_pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + return err; + err = platform_device_add_resources(f71882fg_pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed\n"); goto exit_device_put; } + err = platform_device_add_data(f71882fg_pdev, sio_data, + sizeof(struct f71882fg_sio_data)); + if (err) { + printk(KERN_ERR DRVNAME ": Platform data allocation failed\n"); + goto exit_device_put; + } + err = platform_device_add(f71882fg_pdev); if (err) { printk(KERN_ERR DRVNAME ": Device addition failed\n"); @@ -916,14 +1965,20 @@ static int __init f71882fg_init(void) { int err = -ENODEV; unsigned short address; + struct f71882fg_sio_data sio_data; + + memset(&sio_data, 0, sizeof(sio_data)); - if (f71882fg_find(0x2e, &address) && f71882fg_find(0x4e, &address)) + if (f71882fg_find(0x2e, &address, &sio_data) && + f71882fg_find(0x4e, &address, &sio_data)) goto exit; - if ((err = platform_driver_register(&f71882fg_driver))) + err = platform_driver_register(&f71882fg_driver); + if (err) goto exit; - if ((err = f71882fg_device_add(address))) + err = f71882fg_device_add(address, &sio_data); + if (err) goto exit_driver; return 0; @@ -941,7 +1996,7 @@ static void __exit f71882fg_exit(void) } MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans Edgington (hans@edgington.nl)"); +MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)"); MODULE_LICENSE("GPL"); module_init(f71882fg_init); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 8b2d756595d9..d07f4ef75092 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -1,6 +1,6 @@ /* fschmd.c * - * Copyright (C) 2007 Hans de Goede <j.w.r.degoede@hhs.nl> + * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,11 +42,20 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/dmi.h> +#include <linux/fs.h> +#include <linux/watchdog.h> +#include <linux/miscdevice.h> +#include <linux/uaccess.h> +#include <linux/kref.h> /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* Insmod parameters */ +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); /* @@ -63,13 +72,20 @@ I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); #define FSCHMD_REG_EVENT_STATE 0x04 #define FSCHMD_REG_CONTROL 0x05 -#define FSCHMD_CONTROL_ALERT_LED_MASK 0x01 +#define FSCHMD_CONTROL_ALERT_LED 0x01 -/* watchdog (support to be implemented) */ +/* watchdog */ #define FSCHMD_REG_WDOG_PRESET 0x28 #define FSCHMD_REG_WDOG_STATE 0x23 #define FSCHMD_REG_WDOG_CONTROL 0x21 +#define FSCHMD_WDOG_CONTROL_TRIGGER 0x10 +#define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */ +#define FSCHMD_WDOG_CONTROL_STOP 0x20 +#define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40 + +#define FSCHMD_WDOG_STATE_CARDRESET 0x02 + /* voltages, weird order is to keep the same order as the old drivers */ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 }; @@ -115,8 +131,8 @@ static const u8 FSCHMD_REG_FAN_RIPPLE[5][6] = { static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 }; /* Fan status register bitmasks */ -#define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */ -#define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */ +#define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */ +#define FSCHMD_FAN_NOT_PRESENT 0x08 /* not documented */ /* actual temperature registers */ @@ -158,14 +174,11 @@ static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */ static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 }; /* temp status register bitmasks */ -#define FSCHMD_TEMP_WORKING_MASK 0x01 -#define FSCHMD_TEMP_ALERT_MASK 0x02 +#define FSCHMD_TEMP_WORKING 0x01 +#define FSCHMD_TEMP_ALERT 0x02 /* there only really is an alarm if the sensor is working and alert == 1 */ #define FSCHMD_TEMP_ALARM_MASK \ - (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK) - -/* our driver name */ -#define FSCHMD_NAME "fschmd" + (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT) /* * Functions declarations @@ -195,7 +208,7 @@ MODULE_DEVICE_TABLE(i2c, fschmd_id); static struct i2c_driver fschmd_driver = { .class = I2C_CLASS_HWMON, .driver = { - .name = FSCHMD_NAME, + .name = "fschmd", }, .probe = fschmd_probe, .remove = fschmd_remove, @@ -209,14 +222,26 @@ static struct i2c_driver fschmd_driver = { */ struct fschmd_data { + struct i2c_client *client; struct device *hwmon_dev; struct mutex update_lock; + struct mutex watchdog_lock; + struct list_head list; /* member of the watchdog_data_list */ + struct kref kref; + struct miscdevice watchdog_miscdev; int kind; + unsigned long watchdog_is_open; + char watchdog_expect_close; + char watchdog_name[10]; /* must be unique to avoid sysfs conflict */ char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* register values */ + u8 revision; /* chip revision */ u8 global_control; /* global control register */ + u8 watchdog_control; /* watchdog control register */ + u8 watchdog_state; /* watchdog status register */ + u8 watchdog_preset; /* watchdog counter preset on trigger val */ u8 volt[3]; /* 12, 5, battery voltage */ u8 temp_act[5]; /* temperature */ u8 temp_status[5]; /* status of sensor */ @@ -228,11 +253,28 @@ struct fschmd_data { }; /* Global variables to hold information read from special DMI tables, which are - available on FSC machines with an fscher or later chip. */ + available on FSC machines with an fscher or later chip. There is no need to + protect these with a lock as they are only modified from our attach function + which always gets called with the i2c-core lock held and never accessed + before the attach function is done with them. */ static int dmi_mult[3] = { 490, 200, 100 }; static int dmi_offset[3] = { 0, 0, 0 }; static int dmi_vref = -1; +/* Somewhat ugly :( global data pointer list with all fschmd devices, so that + we can find our device data as when using misc_register there is no other + method to get to ones device data from the open fop. */ +static LIST_HEAD(watchdog_data_list); +/* Note this lock not only protect list access, but also data.kref access */ +static DEFINE_MUTEX(watchdog_data_mutex); + +/* Release our data struct when we're detached from the i2c client *and* all + references to our watchdog device are released */ +static void fschmd_release_resources(struct kref *ref) +{ + struct fschmd_data *data = container_of(ref, struct fschmd_data, kref); + kfree(data); +} /* * Sysfs attr show / store functions @@ -300,7 +342,7 @@ static ssize_t show_temp_fault(struct device *dev, struct fschmd_data *data = fschmd_update_device(dev); /* bit 0 set means sensor working ok, so no fault! */ - if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK) + if (data->temp_status[index] & FSCHMD_TEMP_WORKING) return sprintf(buf, "0\n"); else return sprintf(buf, "1\n"); @@ -385,7 +427,7 @@ static ssize_t show_fan_alarm(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = fschmd_update_device(dev); - if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK) + if (data->fan_status[index] & FSCHMD_FAN_ALARM) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -397,7 +439,7 @@ static ssize_t show_fan_fault(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct fschmd_data *data = fschmd_update_device(dev); - if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK) + if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -449,7 +491,7 @@ static ssize_t show_alert_led(struct device *dev, { struct fschmd_data *data = fschmd_update_device(dev); - if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK) + if (data->global_control & FSCHMD_CONTROL_ALERT_LED) return sprintf(buf, "1\n"); else return sprintf(buf, "0\n"); @@ -467,9 +509,9 @@ static ssize_t store_alert_led(struct device *dev, reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL); if (v) - reg |= FSCHMD_CONTROL_ALERT_LED_MASK; + reg |= FSCHMD_CONTROL_ALERT_LED; else - reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK; + reg &= ~FSCHMD_CONTROL_ALERT_LED; i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg); @@ -551,7 +593,265 @@ static struct sensor_device_attribute fschmd_fan_attr[] = { /* - * Real code + * Watchdog routines + */ + +static int watchdog_set_timeout(struct fschmd_data *data, int timeout) +{ + int ret, resolution; + int kind = data->kind + 1; /* 0-x array index -> 1-x module param */ + + /* 2 second or 60 second resolution? */ + if (timeout <= 510 || kind == fscpos || kind == fscscy) + resolution = 2; + else + resolution = 60; + + if (timeout < resolution || timeout > (resolution * 255)) + return -EINVAL; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + if (resolution == 2) + data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION; + else + data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION; + + data->watchdog_preset = DIV_ROUND_UP(timeout, resolution); + + /* Write new timeout value */ + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_PRESET, + data->watchdog_preset); + /* Write new control register, do not trigger! */ + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL, + data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER); + + ret = data->watchdog_preset * resolution; + +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_get_timeout(struct fschmd_data *data) +{ + int timeout; + + mutex_lock(&data->watchdog_lock); + if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION) + timeout = data->watchdog_preset * 60; + else + timeout = data->watchdog_preset * 2; + mutex_unlock(&data->watchdog_lock); + + return timeout; +} + +static int watchdog_trigger(struct fschmd_data *data) +{ + int ret = 0; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER; + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL, + data->watchdog_control); +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_stop(struct fschmd_data *data) +{ + int ret = 0; + + mutex_lock(&data->watchdog_lock); + if (!data->client) { + ret = -ENODEV; + goto leave; + } + + data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED; + /* Don't store the stop flag in our watchdog control register copy, as + its a write only bit (read always returns 0) */ + i2c_smbus_write_byte_data(data->client, FSCHMD_REG_WDOG_CONTROL, + data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP); +leave: + mutex_unlock(&data->watchdog_lock); + return ret; +} + +static int watchdog_open(struct inode *inode, struct file *filp) +{ + struct fschmd_data *pos, *data = NULL; + + /* We get called from drivers/char/misc.c with misc_mtx hold, and we + call misc_register() from fschmd_probe() with watchdog_data_mutex + hold, as misc_register() takes the misc_mtx lock, this is a possible + deadlock, so we use mutex_trylock here. */ + if (!mutex_trylock(&watchdog_data_mutex)) + return -ERESTARTSYS; + list_for_each_entry(pos, &watchdog_data_list, list) { + if (pos->watchdog_miscdev.minor == iminor(inode)) { + data = pos; + break; + } + } + /* Note we can never not have found data, so we don't check for this */ + kref_get(&data->kref); + mutex_unlock(&watchdog_data_mutex); + + if (test_and_set_bit(0, &data->watchdog_is_open)) + return -EBUSY; + + /* Start the watchdog */ + watchdog_trigger(data); + filp->private_data = data; + + return nonseekable_open(inode, filp); +} + +static int watchdog_release(struct inode *inode, struct file *filp) +{ + struct fschmd_data *data = filp->private_data; + + if (data->watchdog_expect_close) { + watchdog_stop(data); + data->watchdog_expect_close = 0; + } else { + watchdog_trigger(data); + dev_crit(&data->client->dev, + "unexpected close, not stopping watchdog!\n"); + } + + clear_bit(0, &data->watchdog_is_open); + + mutex_lock(&watchdog_data_mutex); + kref_put(&data->kref, fschmd_release_resources); + mutex_unlock(&watchdog_data_mutex); + + return 0; +} + +static ssize_t watchdog_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offset) +{ + size_t ret; + struct fschmd_data *data = filp->private_data; + + if (count) { + if (!nowayout) { + size_t i; + + /* Clear it in case it was set with a previous write */ + data->watchdog_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + data->watchdog_expect_close = 1; + } + } + ret = watchdog_trigger(data); + if (ret < 0) + return ret; + } + return count; +} + +static int watchdog_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_CARDRESET, + .identity = "FSC watchdog" + }; + int i, ret = 0; + struct fschmd_data *data = filp->private_data; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ident.firmware_version = data->revision; + if (!nowayout) + ident.options |= WDIOF_MAGICCLOSE; + if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) + ret = -EFAULT; + break; + + case WDIOC_GETSTATUS: + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_GETBOOTSTATUS: + if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET) + ret = put_user(WDIOF_CARDRESET, (int __user *)arg); + else + ret = put_user(0, (int __user *)arg); + break; + + case WDIOC_KEEPALIVE: + ret = watchdog_trigger(data); + break; + + case WDIOC_GETTIMEOUT: + i = watchdog_get_timeout(data); + ret = put_user(i, (int __user *)arg); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(i, (int __user *)arg)) { + ret = -EFAULT; + break; + } + ret = watchdog_set_timeout(data, i); + if (ret > 0) + ret = put_user(ret, (int __user *)arg); + break; + + case WDIOC_SETOPTIONS: + if (get_user(i, (int __user *)arg)) { + ret = -EFAULT; + break; + } + + if (i & WDIOS_DISABLECARD) + ret = watchdog_stop(data); + else if (i & WDIOS_ENABLECARD) + ret = watchdog_trigger(data); + else + ret = -EINVAL; + + break; + default: + ret = -ENOTTY; + } + + return ret; +} + +static struct file_operations watchdog_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = watchdog_open, + .release = watchdog_release, + .write = watchdog_write, + .ioctl = watchdog_ioctl, +}; + + +/* + * Detect, register, unregister and update device functions */ /* DMI decode routine to read voltage scaling factors from special DMI tables, @@ -661,9 +961,9 @@ static int fschmd_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct fschmd_data *data; - u8 revision; const char * const names[5] = { "Poseidon", "Hermes", "Scylla", "Heracles", "Heimdall" }; + const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 }; int i, err; enum chips kind = id->driver_data; @@ -673,6 +973,13 @@ static int fschmd_probe(struct i2c_client *client, i2c_set_clientdata(client, data); mutex_init(&data->update_lock); + mutex_init(&data->watchdog_lock); + INIT_LIST_HEAD(&data->list); + kref_init(&data->kref); + /* Store client pointer in our data struct for watchdog usage + (where the client is found through a data ptr instead of the + otherway around) */ + data->client = client; if (kind == fscpos) { /* The Poseidon has hardwired temp limits, fill these @@ -683,16 +990,27 @@ static int fschmd_probe(struct i2c_client *client, } /* Read the special DMI table for fscher and newer chips */ - if (kind == fscher || kind >= fschrc) { + if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) { dmi_walk(fschmd_dmi_decode); if (dmi_vref == -1) { - printk(KERN_WARNING FSCHMD_NAME - ": Couldn't get voltage scaling factors from " + dev_warn(&client->dev, + "Couldn't get voltage scaling factors from " "BIOS DMI table, using builtin defaults\n"); dmi_vref = 33; } } + /* Read in some never changing registers */ + data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); + data->global_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_CONTROL); + data->watchdog_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_CONTROL); + data->watchdog_state = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_STATE); + data->watchdog_preset = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_PRESET); + /* i2c kind goes from 1-5, we want from 0-4 to address arrays */ data->kind = kind - 1; @@ -735,9 +1053,43 @@ static int fschmd_probe(struct i2c_client *client, goto exit_detach; } - revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); - printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n", - names[data->kind], (int) revision); + /* We take the data_mutex lock early so that watchdog_open() cannot + run when misc_register() has completed, but we've not yet added + our data to the watchdog_data_list (and set the default timeout) */ + mutex_lock(&watchdog_data_mutex); + for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) { + /* Register our watchdog part */ + snprintf(data->watchdog_name, sizeof(data->watchdog_name), + "watchdog%c", (i == 0) ? '\0' : ('0' + i)); + data->watchdog_miscdev.name = data->watchdog_name; + data->watchdog_miscdev.fops = &watchdog_fops; + data->watchdog_miscdev.minor = watchdog_minors[i]; + err = misc_register(&data->watchdog_miscdev); + if (err == -EBUSY) + continue; + if (err) { + data->watchdog_miscdev.minor = 0; + dev_err(&client->dev, + "Registering watchdog chardev: %d\n", err); + break; + } + + list_add(&data->list, &watchdog_data_list); + watchdog_set_timeout(data, 60); + dev_info(&client->dev, + "Registered watchdog chardev major 10, minor: %d\n", + watchdog_minors[i]); + break; + } + if (i == ARRAY_SIZE(watchdog_minors)) { + data->watchdog_miscdev.minor = 0; + dev_warn(&client->dev, "Couldn't register watchdog chardev " + "(due to no free minor)\n"); + } + mutex_unlock(&watchdog_data_mutex); + + dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n", + names[data->kind], (int) data->revision); return 0; @@ -751,6 +1103,24 @@ static int fschmd_remove(struct i2c_client *client) struct fschmd_data *data = i2c_get_clientdata(client); int i; + /* Unregister the watchdog (if registered) */ + if (data->watchdog_miscdev.minor) { + misc_deregister(&data->watchdog_miscdev); + if (data->watchdog_is_open) { + dev_warn(&client->dev, + "i2c client detached with watchdog open! " + "Stopping watchdog.\n"); + watchdog_stop(data); + } + mutex_lock(&watchdog_data_mutex); + list_del(&data->list); + mutex_unlock(&watchdog_data_mutex); + /* Tell the watchdog code the client is gone */ + mutex_lock(&data->watchdog_lock); + data->client = NULL; + mutex_unlock(&data->watchdog_lock); + } + /* Check if registered in case we're called from fschmd_detect to cleanup after an error */ if (data->hwmon_dev) @@ -765,7 +1135,10 @@ static int fschmd_remove(struct i2c_client *client) device_remove_file(&client->dev, &fschmd_fan_attr[i].dev_attr); - kfree(data); + mutex_lock(&watchdog_data_mutex); + kref_put(&data->kref, fschmd_release_resources); + mutex_unlock(&watchdog_data_mutex); + return 0; } @@ -798,7 +1171,7 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) data->temp_act[i] < data->temp_max[i]) i2c_smbus_write_byte_data(client, FSCHMD_REG_TEMP_STATE[data->kind][i], - FSCHMD_TEMP_ALERT_MASK); + FSCHMD_TEMP_ALERT); } for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) { @@ -816,28 +1189,17 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) FSCHMD_REG_FAN_MIN[data->kind][i]); /* reset fan status if speed is back to > 0 */ - if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) && + if ((data->fan_status[i] & FSCHMD_FAN_ALARM) && data->fan_act[i]) i2c_smbus_write_byte_data(client, FSCHMD_REG_FAN_STATE[data->kind][i], - FSCHMD_FAN_ALARM_MASK); + FSCHMD_FAN_ALARM); } for (i = 0; i < 3; i++) data->volt[i] = i2c_smbus_read_byte_data(client, FSCHMD_REG_VOLT[i]); - data->global_control = i2c_smbus_read_byte_data(client, - FSCHMD_REG_CONTROL); - - /* To be implemented in the future - data->watchdog[0] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_WDOG_PRESET); - data->watchdog[1] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_WDOG_STATE); - data->watchdog[2] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_WDOG_CONTROL); */ - data->last_updated = jiffies; data->valid = 1; } @@ -857,7 +1219,7 @@ static void __exit fschmd_exit(void) i2c_del_driver(&fschmd_driver); } -MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and " "Heimdall driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 2ede9388096b..27d7f72a5f11 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -490,6 +490,13 @@ static unsigned long chipset_ids[] = { 0 }; +static struct pci_device_id i5k_amb_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, i5k_amb_ids); + static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index b74c95735f95..95a99c590da2 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -14,6 +14,7 @@ IT8712F Super I/O chip w/LPC interface IT8716F Super I/O chip w/LPC interface IT8718F Super I/O chip w/LPC interface + IT8720F Super I/O chip w/LPC interface IT8726F Super I/O chip w/LPC interface Sis950 A clone of the IT8705F @@ -48,11 +49,12 @@ #include <linux/sysfs.h> #include <linux/string.h> #include <linux/dmi.h> +#include <linux/acpi.h> #include <asm/io.h> #define DRVNAME "it87" -enum chips { it87, it8712, it8716, it8718 }; +enum chips { it87, it8712, it8716, it8718, it8720 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -64,7 +66,10 @@ static struct platform_device *pdev; #define DEV 0x07 /* Register: Logical device select */ #define VAL 0x2f /* The value to read/write */ #define PME 0x04 /* The device with the fan registers in it */ -#define GPIO 0x07 /* The device with the IT8718F VID value in it */ + +/* The device with the IT8718F/IT8720F VID value in it */ +#define GPIO 0x07 + #define DEVID 0x20 /* Register: Device ID */ #define DEVREV 0x22 /* Register: Device Revision */ @@ -113,6 +118,7 @@ superio_exit(void) #define IT8705F_DEVID 0x8705 #define IT8716F_DEVID 0x8716 #define IT8718F_DEVID 0x8718 +#define IT8720F_DEVID 0x8720 #define IT8726F_DEVID 0x8726 #define IT87_ACT_REG 0x30 #define IT87_BASE_REG 0x60 @@ -150,8 +156,8 @@ static int fix_pwm_polarity; #define IT87_REG_ALARM2 0x02 #define IT87_REG_ALARM3 0x03 -/* The IT8718F has the VID value in a different register, in Super-I/O - configuration space. */ +/* The IT8718F and IT8720F have the VID value in a different register, in + Super-I/O configuration space. */ #define IT87_REG_VID 0x0a /* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b for fan divisors. Later IT8712F revisions must use 16-bit tachometer @@ -282,7 +288,8 @@ static inline int has_16bit_fans(const struct it87_data *data) return (data->type == it87 && data->revision >= 0x03) || (data->type == it8712 && data->revision >= 0x08) || data->type == it8716 - || data->type == it8718; + || data->type == it8718 + || data->type == it8720; } static int it87_probe(struct platform_device *pdev); @@ -992,6 +999,9 @@ static int __init it87_find(unsigned short *address, case IT8718F_DEVID: sio_data->type = it8718; break; + case IT8720F_DEVID: + sio_data->type = it8720; + break; case 0xffff: /* No device at all */ goto exit; default: @@ -1022,7 +1032,8 @@ static int __init it87_find(unsigned short *address, int reg; superio_select(GPIO); - if (chip_type == it8718) + if ((chip_type == it8718) || + (chip_type == it8720)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); @@ -1068,6 +1079,7 @@ static int __devinit it87_probe(struct platform_device *pdev) "it8712", "it8716", "it8718", + "it8720", }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -1226,7 +1238,7 @@ static int __devinit it87_probe(struct platform_device *pdev) } if (data->type == it8712 || data->type == it8716 - || data->type == it8718) { + || data->type == it8718 || data->type == it8720) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ data->vid = sio_data->vid_value; @@ -1374,7 +1386,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); } - /* Check if temperature channnels are reset manually or by some reason */ + /* Check if temperature channels are reset manually or by some reason */ tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE); if ((tmp & 0x3f) == 0) { /* Temp1,Temp3=thermistor; Temp2=thermal diode */ @@ -1513,7 +1525,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); /* The 8705 does not have VID capability. - The 8718 does not use IT87_REG_VID for the same purpose. */ + The 8718 and the 8720 don't use IT87_REG_VID for the + same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, @@ -1540,6 +1553,10 @@ static int __init it87_device_add(unsigned short address, }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; @@ -1608,7 +1625,7 @@ static void __exit sm_it87_exit(void) MODULE_AUTHOR("Chris Gauthron, " "Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8726F, SiS950 driver"); +MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver"); module_param(update_vbat, bool, 0); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); module_param(fix_pwm_polarity, bool, 0); diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c index d435f003292d..ae6204f33214 100644 --- a/drivers/hwmon/lm70.c +++ b/drivers/hwmon/lm70.c @@ -37,9 +37,13 @@ #define DRVNAME "lm70" +#define LM70_CHIP_LM70 0 /* original NS LM70 */ +#define LM70_CHIP_TMP121 1 /* TI TMP121/TMP123 */ + struct lm70 { struct device *hwmon_dev; struct mutex lock; + unsigned int chip; }; /* sysfs hook function */ @@ -47,7 +51,7 @@ static ssize_t lm70_sense_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct spi_device *spi = to_spi_device(dev); - int status, val; + int status, val = 0; u8 rxbuf[2]; s16 raw=0; struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev); @@ -65,12 +69,12 @@ static ssize_t lm70_sense_temp(struct device *dev, "spi_write_then_read failed with status %d\n", status); goto out; } - dev_dbg(dev, "rxbuf[1] : 0x%x rxbuf[0] : 0x%x\n", rxbuf[1], rxbuf[0]); - - raw = (rxbuf[1] << 8) + rxbuf[0]; - dev_dbg(dev, "raw=0x%x\n", raw); + raw = (rxbuf[0] << 8) + rxbuf[1]; + dev_dbg(dev, "rxbuf[0] : 0x%02x rxbuf[1] : 0x%02x raw=0x%04x\n", + rxbuf[0], rxbuf[1], raw); /* + * LM70: * The "raw" temperature read into rxbuf[] is a 16-bit signed 2's * complement value. Only the MSB 11 bits (1 sign + 10 temperature * bits) are meaningful; the LSB 5 bits are to be discarded. @@ -80,8 +84,21 @@ static ssize_t lm70_sense_temp(struct device *dev, * by 0.25. Also multiply by 1000 to represent in millidegrees * Celsius. * So it's equivalent to multiplying by 0.25 * 1000 = 250. + * + * TMP121/TMP123: + * 13 bits of 2's complement data, discard LSB 3 bits, + * resolution 0.0625 degrees celsius. */ - val = ((int)raw/32) * 250; + switch (p_lm70->chip) { + case LM70_CHIP_LM70: + val = ((int)raw / 32) * 250; + break; + + case LM70_CHIP_TMP121: + val = ((int)raw / 8) * 625 / 10; + break; + } + status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ out: mutex_unlock(&p_lm70->lock); @@ -93,27 +110,39 @@ static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL); static ssize_t lm70_show_name(struct device *dev, struct device_attribute *devattr, char *buf) { - return sprintf(buf, "lm70\n"); + struct lm70 *p_lm70 = dev_get_drvdata(dev); + int ret; + + switch (p_lm70->chip) { + case LM70_CHIP_LM70: + ret = sprintf(buf, "lm70\n"); + break; + case LM70_CHIP_TMP121: + ret = sprintf(buf, "tmp121\n"); + break; + default: + ret = -EINVAL; + } + return ret; } static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL); /*----------------------------------------------------------------------*/ -static int __devinit lm70_probe(struct spi_device *spi) +static int __devinit common_probe(struct spi_device *spi, int chip) { struct lm70 *p_lm70; int status; - /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */ - if ((spi->mode & (SPI_CPOL|SPI_CPHA)) || !(spi->mode & SPI_3WIRE)) - return -EINVAL; + /* NOTE: we assume 8-bit words, and convert to 16 bits manually */ p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL); if (!p_lm70) return -ENOMEM; mutex_init(&p_lm70->lock); + p_lm70->chip = chip; /* sysfs hook */ p_lm70->hwmon_dev = hwmon_device_register(&spi->dev); @@ -141,6 +170,24 @@ out_dev_reg_failed: return status; } +static int __devinit lm70_probe(struct spi_device *spi) +{ + /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */ + if ((spi->mode & (SPI_CPOL | SPI_CPHA)) || !(spi->mode & SPI_3WIRE)) + return -EINVAL; + + return common_probe(spi, LM70_CHIP_LM70); +} + +static int __devinit tmp121_probe(struct spi_device *spi) +{ + /* signaling is SPI_MODE_0 with only MISO connected */ + if (spi->mode & (SPI_CPOL | SPI_CPHA)) + return -EINVAL; + + return common_probe(spi, LM70_CHIP_TMP121); +} + static int __devexit lm70_remove(struct spi_device *spi) { struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev); @@ -154,6 +201,15 @@ static int __devexit lm70_remove(struct spi_device *spi) return 0; } +static struct spi_driver tmp121_driver = { + .driver = { + .name = "tmp121", + .owner = THIS_MODULE, + }, + .probe = tmp121_probe, + .remove = __devexit_p(lm70_remove), +}; + static struct spi_driver lm70_driver = { .driver = { .name = "lm70", @@ -165,17 +221,26 @@ static struct spi_driver lm70_driver = { static int __init init_lm70(void) { - return spi_register_driver(&lm70_driver); + int ret = spi_register_driver(&lm70_driver); + if (ret) + return ret; + + ret = spi_register_driver(&tmp121_driver); + if (ret) + spi_unregister_driver(&lm70_driver); + + return ret; } static void __exit cleanup_lm70(void) { spi_unregister_driver(&lm70_driver); + spi_unregister_driver(&tmp121_driver); } module_init(init_lm70); module_exit(cleanup_lm70); MODULE_AUTHOR("Kaiwan N Billimoria"); -MODULE_DESCRIPTION("National Semiconductor LM70 Linux driver"); +MODULE_DESCRIPTION("NS LM70 / TI TMP121/TMP123 Linux driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c new file mode 100644 index 000000000000..034b2c515848 --- /dev/null +++ b/drivers/hwmon/ltc4245.c @@ -0,0 +1,567 @@ +/* + * Driver for Linear Technology LTC4245 I2C Multiple Supply Hot Swap Controller + * + * Copyright (C) 2008 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This driver is based on the ds1621 and ina209 drivers. + * + * Datasheet: + * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +/* Valid addresses are 0x20 - 0x3f + * + * For now, we do not probe, since some of these addresses + * are known to be unfriendly to probing */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ltc4245); + +/* Here are names of the chip's registers (a.k.a. commands) */ +enum ltc4245_cmd { + LTC4245_STATUS = 0x00, /* readonly */ + LTC4245_ALERT = 0x01, + LTC4245_CONTROL = 0x02, + LTC4245_ON = 0x03, + LTC4245_FAULT1 = 0x04, + LTC4245_FAULT2 = 0x05, + LTC4245_GPIO = 0x06, + LTC4245_ADCADR = 0x07, + + LTC4245_12VIN = 0x10, + LTC4245_12VSENSE = 0x11, + LTC4245_12VOUT = 0x12, + LTC4245_5VIN = 0x13, + LTC4245_5VSENSE = 0x14, + LTC4245_5VOUT = 0x15, + LTC4245_3VIN = 0x16, + LTC4245_3VSENSE = 0x17, + LTC4245_3VOUT = 0x18, + LTC4245_VEEIN = 0x19, + LTC4245_VEESENSE = 0x1a, + LTC4245_VEEOUT = 0x1b, + LTC4245_GPIOADC1 = 0x1c, + LTC4245_GPIOADC2 = 0x1d, + LTC4245_GPIOADC3 = 0x1e, +}; + +struct ltc4245_data { + struct device *hwmon_dev; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* Control registers */ + u8 cregs[0x08]; + + /* Voltage registers */ + u8 vregs[0x0f]; +}; + +static struct ltc4245_data *ltc4245_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ltc4245_data *data = i2c_get_clientdata(client); + s32 val; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + + dev_dbg(&client->dev, "Starting ltc4245 update\n"); + + /* Read control registers -- 0x00 to 0x07 */ + for (i = 0; i < ARRAY_SIZE(data->cregs); i++) { + val = i2c_smbus_read_byte_data(client, i); + if (unlikely(val < 0)) + data->cregs[i] = 0; + else + data->cregs[i] = val; + } + + /* Read voltage registers -- 0x10 to 0x1f */ + for (i = 0; i < ARRAY_SIZE(data->vregs); i++) { + val = i2c_smbus_read_byte_data(client, i+0x10); + if (unlikely(val < 0)) + data->vregs[i] = 0; + else + data->vregs[i] = val; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* Return the voltage from the given register in millivolts */ +static int ltc4245_get_voltage(struct device *dev, u8 reg) +{ + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 regval = data->vregs[reg - 0x10]; + u32 voltage = 0; + + switch (reg) { + case LTC4245_12VIN: + case LTC4245_12VOUT: + voltage = regval * 55; + break; + case LTC4245_5VIN: + case LTC4245_5VOUT: + voltage = regval * 22; + break; + case LTC4245_3VIN: + case LTC4245_3VOUT: + voltage = regval * 15; + break; + case LTC4245_VEEIN: + case LTC4245_VEEOUT: + voltage = regval * -55; + break; + case LTC4245_GPIOADC1: + case LTC4245_GPIOADC2: + case LTC4245_GPIOADC3: + voltage = regval * 10; + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + break; + } + + return voltage; +} + +/* Return the current in the given sense register in milliAmperes */ +static unsigned int ltc4245_get_current(struct device *dev, u8 reg) +{ + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 regval = data->vregs[reg - 0x10]; + unsigned int voltage; + unsigned int curr; + + /* The strange looking conversions that follow are fixed-point + * math, since we cannot do floating point in the kernel. + * + * Step 1: convert sense register to microVolts + * Step 2: convert voltage to milliAmperes + * + * If you play around with the V=IR equation, you come up with + * the following: X uV / Y mOhm == Z mA + * + * With the resistors that are fractions of a milliOhm, we multiply + * the voltage and resistance by 10, to shift the decimal point. + * Now we can use the normal division operator again. + */ + + switch (reg) { + case LTC4245_12VSENSE: + voltage = regval * 250; /* voltage in uV */ + curr = voltage / 50; /* sense resistor 50 mOhm */ + break; + case LTC4245_5VSENSE: + voltage = regval * 125; /* voltage in uV */ + curr = (voltage * 10) / 35; /* sense resistor 3.5 mOhm */ + break; + case LTC4245_3VSENSE: + voltage = regval * 125; /* voltage in uV */ + curr = (voltage * 10) / 25; /* sense resistor 2.5 mOhm */ + break; + case LTC4245_VEESENSE: + voltage = regval * 250; /* voltage in uV */ + curr = voltage / 100; /* sense resistor 100 mOhm */ + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + curr = 0; + break; + } + + return curr; +} + +static ssize_t ltc4245_show_voltage(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const int voltage = ltc4245_get_voltage(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%d\n", voltage); +} + +static ssize_t ltc4245_show_current(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const unsigned int curr = ltc4245_get_current(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%u\n", curr); +} + +static ssize_t ltc4245_show_power(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const unsigned int curr = ltc4245_get_current(dev, attr->index); + const int output_voltage = ltc4245_get_voltage(dev, attr->index+1); + + /* current in mA * voltage in mV == power in uW */ + const unsigned int power = abs(output_voltage * curr); + + return snprintf(buf, PAGE_SIZE, "%u\n", power); +} + +static ssize_t ltc4245_show_alarm(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 reg = data->cregs[attr->index]; + const u32 mask = attr->nr; + + return snprintf(buf, PAGE_SIZE, "%u\n", (reg & mask) ? 1 : 0); +} + +/* These macros are used below in constructing device attribute objects + * for use with sysfs_create_group() to make a sysfs device file + * for each register. + */ + +#define LTC4245_VOLTAGE(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_voltage, NULL, ltc4245_cmd_idx) + +#define LTC4245_CURRENT(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_current, NULL, ltc4245_cmd_idx) + +#define LTC4245_POWER(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_power, NULL, ltc4245_cmd_idx) + +#define LTC4245_ALARM(name, mask, reg) \ + static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \ + ltc4245_show_alarm, NULL, (mask), reg) + +/* Construct a sensor_device_attribute structure for each register */ + +/* Input voltages */ +LTC4245_VOLTAGE(in1_input, LTC4245_12VIN); +LTC4245_VOLTAGE(in2_input, LTC4245_5VIN); +LTC4245_VOLTAGE(in3_input, LTC4245_3VIN); +LTC4245_VOLTAGE(in4_input, LTC4245_VEEIN); + +/* Input undervoltage alarms */ +LTC4245_ALARM(in1_min_alarm, (1 << 0), LTC4245_FAULT1); +LTC4245_ALARM(in2_min_alarm, (1 << 1), LTC4245_FAULT1); +LTC4245_ALARM(in3_min_alarm, (1 << 2), LTC4245_FAULT1); +LTC4245_ALARM(in4_min_alarm, (1 << 3), LTC4245_FAULT1); + +/* Currents (via sense resistor) */ +LTC4245_CURRENT(curr1_input, LTC4245_12VSENSE); +LTC4245_CURRENT(curr2_input, LTC4245_5VSENSE); +LTC4245_CURRENT(curr3_input, LTC4245_3VSENSE); +LTC4245_CURRENT(curr4_input, LTC4245_VEESENSE); + +/* Overcurrent alarms */ +LTC4245_ALARM(curr1_max_alarm, (1 << 4), LTC4245_FAULT1); +LTC4245_ALARM(curr2_max_alarm, (1 << 5), LTC4245_FAULT1); +LTC4245_ALARM(curr3_max_alarm, (1 << 6), LTC4245_FAULT1); +LTC4245_ALARM(curr4_max_alarm, (1 << 7), LTC4245_FAULT1); + +/* Output voltages */ +LTC4245_VOLTAGE(in5_input, LTC4245_12VOUT); +LTC4245_VOLTAGE(in6_input, LTC4245_5VOUT); +LTC4245_VOLTAGE(in7_input, LTC4245_3VOUT); +LTC4245_VOLTAGE(in8_input, LTC4245_VEEOUT); + +/* Power Bad alarms */ +LTC4245_ALARM(in5_min_alarm, (1 << 0), LTC4245_FAULT2); +LTC4245_ALARM(in6_min_alarm, (1 << 1), LTC4245_FAULT2); +LTC4245_ALARM(in7_min_alarm, (1 << 2), LTC4245_FAULT2); +LTC4245_ALARM(in8_min_alarm, (1 << 3), LTC4245_FAULT2); + +/* GPIO voltages */ +LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC1); +LTC4245_VOLTAGE(in10_input, LTC4245_GPIOADC2); +LTC4245_VOLTAGE(in11_input, LTC4245_GPIOADC3); + +/* Power Consumption (virtual) */ +LTC4245_POWER(power1_input, LTC4245_12VSENSE); +LTC4245_POWER(power2_input, LTC4245_5VSENSE); +LTC4245_POWER(power3_input, LTC4245_3VSENSE); +LTC4245_POWER(power4_input, LTC4245_VEESENSE); + +/* Finally, construct an array of pointers to members of the above objects, + * as required for sysfs_create_group() + */ +static struct attribute *ltc4245_attributes[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in2_min_alarm.dev_attr.attr, + &sensor_dev_attr_in3_min_alarm.dev_attr.attr, + &sensor_dev_attr_in4_min_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr2_input.dev_attr.attr, + &sensor_dev_attr_curr3_input.dev_attr.attr, + &sensor_dev_attr_curr4_input.dev_attr.attr, + + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr2_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr3_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr4_max_alarm.dev_attr.attr, + + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + + &sensor_dev_attr_in5_min_alarm.dev_attr.attr, + &sensor_dev_attr_in6_min_alarm.dev_attr.attr, + &sensor_dev_attr_in7_min_alarm.dev_attr.attr, + &sensor_dev_attr_in8_min_alarm.dev_attr.attr, + + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_power2_input.dev_attr.attr, + &sensor_dev_attr_power3_input.dev_attr.attr, + &sensor_dev_attr_power4_input.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group ltc4245_group = { + .attrs = ltc4245_attributes, +}; + +static int ltc4245_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ltc4245_data *data; + int ret; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto out_kzalloc; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Initialize the LTC4245 chip */ + /* TODO */ + + /* Register sysfs hooks */ + ret = sysfs_create_group(&client->dev.kobj, <c4245_group); + if (ret) + goto out_sysfs_create_group; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto out_hwmon_device_register; + } + + return 0; + +out_hwmon_device_register: + sysfs_remove_group(&client->dev.kobj, <c4245_group); +out_sysfs_create_group: + kfree(data); +out_kzalloc: + return ret; +} + +static int ltc4245_remove(struct i2c_client *client) +{ + struct ltc4245_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, <c4245_group); + + kfree(data); + + return 0; +} + +/* Check that some bits in a control register appear at all possible + * locations without changing value + * + * @client: the i2c client to use + * @reg: the register to read + * @bits: the bits to check (0xff checks all bits, + * 0x03 checks only the last two bits) + * + * return -ERRNO if the register read failed + * return -ENODEV if the register value doesn't stay constant at all + * possible addresses + * + * return 0 for success + */ +static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits) +{ + int i; + s32 v, voff1, voff2; + + /* Read register and check for error */ + v = i2c_smbus_read_byte_data(client, reg); + if (v < 0) + return v; + + v &= bits; + + for (i = 0x00; i < 0xff; i += 0x20) { + + voff1 = i2c_smbus_read_byte_data(client, reg + i); + if (voff1 < 0) + return voff1; + + voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08); + if (voff2 < 0) + return voff2; + + voff1 &= bits; + voff2 &= bits; + + if (v != voff1 || v != voff2) + return -ENODEV; + } + + return 0; +} + +static int ltc4245_detect(struct i2c_client *client, + int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind < 0) { /* probed detection - check the chip type */ + s32 v; /* 8 bits from the chip, or -ERRNO */ + + /* Chip registers 0x00-0x07 are control registers + * Chip registers 0x10-0x1f are data registers + * + * Address bits b7-b5 are ignored. This makes the chip "repeat" + * in steps of 0x20. Any control registers should appear with + * the same values across all duplicated addresses. + * + * Register 0x02 bit b2 is reserved, expect 0 + * Register 0x07 bits b7 to b4 are reserved, expect 0 + * + * Registers 0x01, 0x02 are control registers and should not + * change on their own. + * + * Register 0x06 bits b6 and b7 are control bits, and should + * not change on their own. + * + * Register 0x07 bits b3 to b0 are control bits, and should + * not change on their own. + */ + + /* read register 0x02 reserved bit, expect 0 */ + v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL); + if (v < 0 || (v & 0x04) != 0) + return -ENODEV; + + /* read register 0x07 reserved bits, expect 0 */ + v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR); + if (v < 0 || (v & 0xf0) != 0) + return -ENODEV; + + /* check that the alert register appears at all locations */ + if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff)) + return -ENODEV; + + /* check that the control register appears at all locations */ + if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff)) + return -ENODEV; + + /* check that register 0x06 bits b6 and b7 stay constant */ + if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0)) + return -ENODEV; + + /* check that register 0x07 bits b3-b0 stay constant */ + if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f)) + return -ENODEV; + } + + strlcpy(info->type, "ltc4245", I2C_NAME_SIZE); + dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n", + kind < 0 ? "probed" : "forced", + client->addr); + + return 0; +} + +static const struct i2c_device_id ltc4245_id[] = { + { "ltc4245", ltc4245 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc4245_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ltc4245_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ltc4245", + }, + .probe = ltc4245_probe, + .remove = ltc4245_remove, + .id_table = ltc4245_id, + .detect = ltc4245_detect, + .address_data = &addr_data, +}; + +static int __init ltc4245_init(void) +{ + return i2c_add_driver(<c4245_driver); +} + +static void __exit ltc4245_exit(void) +{ + i2c_del_driver(<c4245_driver); +} + +MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>"); +MODULE_DESCRIPTION("LTC4245 driver"); +MODULE_LICENSE("GPL"); + +module_init(ltc4245_init); +module_exit(ltc4245_exit); diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 5fbfa34c110e..fb052fea3744 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -43,6 +43,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> static u8 devid; @@ -1627,6 +1628,11 @@ static int __init pc87360_device_add(unsigned short address) continue; res.start = extra_isa[i]; res.end = extra_isa[i] + PC87360_EXTENT - 1; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR "pc87360: Device resource[%d] " diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c index 7265f22ae5cd..3a8a0f7a7736 100644 --- a/drivers/hwmon/pc87427.c +++ b/drivers/hwmon/pc87427.c @@ -32,6 +32,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -524,6 +525,10 @@ static int __init pc87427_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index a276806f3d53..aa2e8318f167 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -62,6 +62,7 @@ #include <linux/jiffies.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/acpi.h> #include <asm/io.h> @@ -727,6 +728,10 @@ static int __devinit sis5595_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc("sis5595", address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index eb03544c731c..6f6d52b4fb64 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -36,6 +36,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -303,6 +304,10 @@ static int __init smsc47b397_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index d1b498548736..a92dbb97ee99 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -37,6 +37,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/acpi.h> #include <asm/io.h> static unsigned short force_id; @@ -705,6 +706,10 @@ static int __init smsc47m1_device_add(unsigned short address, }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index f1ee5e731968..a022aedcaacb 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -41,6 +41,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/acpi.h> #include <asm/io.h> @@ -783,6 +784,10 @@ static int __devinit via686a_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc("via686a", address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index 12b43590fa53..b0ce37852281 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -32,6 +32,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> static int uch_config = -1; @@ -1259,6 +1260,10 @@ static int __init vt1211_device_add(unsigned short address) } res.name = pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto EXIT; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed " diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 5bc57275cae8..9982b45fbb14 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -35,6 +35,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> static int force_addr; @@ -894,6 +895,10 @@ static int __devinit vt8231_device_add(unsigned short address) }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc("vt8231", address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 075164dd65a7..cb808d015361 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -48,6 +48,7 @@ #include <linux/hwmon-vid.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/acpi.h> #include <asm/io.h> #include "lm75.h" @@ -502,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } for (i = 0; i < 4; i++) { - /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ + /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i != 1) { pwmcfg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[i]); @@ -1544,6 +1545,11 @@ static int __init sensors_w83627ehf_init(void) res.start = address + IOREGION_OFFSET; res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + err = platform_device_add_resources(pdev, &res, 1); if (err) { printk(KERN_ERR DRVNAME ": Device resource addition failed " diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index b30e5796cb26..389150ba30d3 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -50,6 +50,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/ioport.h> +#include <linux/acpi.h> #include <asm/io.h> #include "lm75.h" @@ -1793,6 +1794,10 @@ static int __init w83627hf_device_add(unsigned short address, }; int err; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index fc12bd412e3a..dbfb30c588d8 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -58,7 +58,10 @@ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int reset; diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 5768def8a4f2..97851c5ba3a3 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -53,7 +53,10 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83791d); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int reset; diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index cf94c5b0c879..2be16194ddf3 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -51,7 +51,10 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83792d); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int init; diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 0a739f1c69be..47dd398f7258 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -42,7 +42,10 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, /* Insmod parameters */ I2C_CLIENT_INSMOD_1(w83793); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + +static unsigned short force_subclients[4]; +module_param_array(force_subclients, short, NULL, 0); +MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); static int reset; diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c index af6526767e2a..568c781ad91c 100644 --- a/drivers/spi/spi_lm70llp.c +++ b/drivers/spi/spi_lm70llp.c @@ -1,5 +1,5 @@ /* - * spi_lm70llp.c - driver for lm70llp eval board for the LM70 sensor + * spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor * * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com> * @@ -40,8 +40,12 @@ * master controller driver. The hwmon/lm70 driver is a "SPI protocol * driver", layered on top of this one and usable without the lm70llp. * + * Datasheet and Schematic: * The LM70 is a temperature sensor chip from National Semiconductor; its * datasheet is available at http://www.national.com/pf/LM/LM70.html + * The schematic for this particular board (the LM70EVAL-LLP) is + * available (on page 4) here: + * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf * * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is * (heavily) based on spi-butterfly by David Brownell. @@ -64,7 +68,7 @@ * * Note that parport pin 13 actually gets inverted by the transistor * arrangement which lets either the parport or the LM70 drive the - * SI/SO signal. + * SI/SO signal (see the schematic for details). */ #define DRVNAME "spi-lm70llp" @@ -106,12 +110,16 @@ static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) static inline void deassertCS(struct spi_lm70llp *pp) { u8 data = parport_read_data(pp->port); + + data &= ~0x80; /* pull D7/SI-out low while de-asserted */ parport_write_data(pp->port, data | nCS); } static inline void assertCS(struct spi_lm70llp *pp) { u8 data = parport_read_data(pp->port); + + data |= 0x80; /* pull D7/SI-out high so lm70 drives SO-in */ parport_write_data(pp->port, data & ~nCS); } @@ -184,22 +192,7 @@ static void lm70_chipselect(struct spi_device *spi, int value) */ static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) { - static u32 sio=0; - static int first_time=1; - - /* First time: perform SPI bitbang and return the LSB of - * the result of the SPI call. - */ - if (first_time) { - sio = bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); - first_time=0; - return (sio & 0x00ff); - } - /* Return the MSB of the result of the SPI call */ - else { - first_time=1; - return (sio >> 8); - } + return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); } static void spi_lm70llp_attach(struct parport *p) @@ -293,10 +286,9 @@ static void spi_lm70llp_attach(struct parport *p) status = -ENODEV; goto out_bitbang_stop; } - pp->spidev_lm70->bits_per_word = 16; + pp->spidev_lm70->bits_per_word = 8; lm70llp = pp; - return; out_bitbang_stop: @@ -326,7 +318,6 @@ static void spi_lm70llp_detach(struct parport *p) /* power down */ parport_write_data(pp->port, 0); - msleep(10); parport_release(pp->pd); parport_unregister_device(pp->pd); |