diff options
70 files changed, 1512 insertions, 13 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 57fd867553d7..2812b152d6e9 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -439,6 +439,7 @@ static struct usb_driver ath3k_driver = { .probe = ath3k_probe, .disconnect = ath3k_disconnect, .id_table = ath3k_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(ath3k_driver); diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index 1e742a50e2cd..37ae175162f3 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -279,6 +279,7 @@ static struct usb_driver bcm203x_driver = { .probe = bcm203x_probe, .disconnect = bcm203x_disconnect, .id_table = bcm203x_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(bcm203x_driver); diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c index b8ac1c549a1c..32e825144fe9 100644 --- a/drivers/bluetooth/bfusb.c +++ b/drivers/bluetooth/bfusb.c @@ -749,6 +749,7 @@ static struct usb_driver bfusb_driver = { .probe = bfusb_probe, .disconnect = bfusb_disconnect, .id_table = bfusb_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(bfusb_driver); diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index d894340a7601..609861a53c28 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -508,6 +508,7 @@ static struct usb_driver bpa10x_driver = { .probe = bpa10x_probe, .disconnect = bpa10x_disconnect, .id_table = bpa10x_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(bpa10x_driver); diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9217121362e1..461c68bc4dd7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1218,6 +1218,7 @@ static struct usb_driver btusb_driver = { #endif .id_table = btusb_table, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(btusb_driver); diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index afa080258bfa..17ea0177a529 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -148,6 +148,7 @@ static struct usb_driver gigaset_usb_driver = { .reset_resume = gigaset_post_reset, .pre_reset = gigaset_pre_reset, .post_reset = gigaset_post_reset, + .disable_hub_initiated_lpm = 1, }; /* get message text for usb_submit_urb return code diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index 049da67f6392..78f81e8a5be6 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -124,6 +124,7 @@ static struct usb_driver gigaset_usb_driver = { .reset_resume = gigaset_resume, .pre_reset = gigaset_pre_reset, .post_reset = gigaset_resume, + .disable_hub_initiated_lpm = 1, }; struct usb_cardstate { diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 8cde2a0538ab..cddb769a8b12 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -2151,6 +2151,7 @@ static struct usb_driver hfcsusb_drv = { .id_table = hfcsusb_idtab, .probe = hfcsusb_probe, .disconnect = hfcsusb_disconnect, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(hfcsusb_drv); diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 62c65bdefd8a..84f9c8103078 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1568,6 +1568,7 @@ static struct usb_driver hfc_drv = { .id_table = hfcusb_idtab, .probe = hfc_usb_probe, .disconnect = hfc_usb_disconnect, + .disable_hub_initiated_lpm = 1, }; static void __exit diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c index 100296e20dc0..54ef9e4f8cbc 100644 --- a/drivers/isdn/hisax/st5481_init.c +++ b/drivers/isdn/hisax/st5481_init.c @@ -182,6 +182,7 @@ static struct usb_driver st5481_usb_driver = { .probe = probe_st5481, .disconnect = disconnect_st5481, .id_table = st5481_ids, + .disable_hub_initiated_lpm = 1, }; static int __init st5481_usb_init(void) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 42b5151aa78a..71e2b0523bc2 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1647,6 +1647,7 @@ static struct usb_driver asix_driver = { .resume = usbnet_resume, .disconnect = usbnet_disconnect, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(asix_driver); diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 5a73730b32eb..26c5bebd9eca 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -952,6 +952,7 @@ static struct usb_driver catc_driver = { .probe = catc_probe, .disconnect = catc_disconnect, .id_table = catc_id_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(catc_driver); diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 3e41b00c6806..d848d4dd5754 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -457,6 +457,7 @@ static struct usb_driver usbpn_driver = { .probe = usbpn_probe, .disconnect = usbpn_disconnect, .id_table = usbpn_ids, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(usbpn_driver); diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 685a4e22c768..434d5af8e6fb 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -368,6 +368,7 @@ static struct usb_driver eem_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(eem_driver); diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 00880edba048..04997320862a 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -633,6 +633,7 @@ static struct usb_driver cdc_driver = { .resume = usbnet_resume, .reset_resume = usbnet_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(cdc_driver); diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 7adc9f6b0ea1..4b9513fcf275 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1212,6 +1212,7 @@ static struct usb_driver cdc_ncm_driver = { .resume = usbnet_resume, .reset_resume = usbnet_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; static const struct ethtool_ops cdc_ncm_ethtool_ops = { diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c index b403d934e4e3..0d1fe89ae0bd 100644 --- a/drivers/net/usb/cdc_subset.c +++ b/drivers/net/usb/cdc_subset.c @@ -336,6 +336,7 @@ static struct usb_driver cdc_subset_driver = { .resume = usbnet_resume, .disconnect = usbnet_disconnect, .id_table = products, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(cdc_subset_driver); diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c index 0e0531356e62..49ab45e17fe8 100644 --- a/drivers/net/usb/cx82310_eth.c +++ b/drivers/net/usb/cx82310_eth.c @@ -327,6 +327,7 @@ static struct usb_driver cx82310_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(cx82310_driver); diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index b97226318ea5..e0433ce6ced7 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -670,6 +670,7 @@ static struct usb_driver dm9601_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(dm9601_driver); diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c index 38266bdae26b..db3c8021f2a3 100644 --- a/drivers/net/usb/gl620a.c +++ b/drivers/net/usb/gl620a.c @@ -225,6 +225,7 @@ static struct usb_driver gl620a_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(gl620a_driver); diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 2d2a6882ba33..042c1a99520f 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -3291,6 +3291,7 @@ static struct usb_driver hso_driver = { .resume = hso_resume, .reset_resume = hso_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; static int __init hso_init(void) diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c index 12a22a453ff1..8de641713d5f 100644 --- a/drivers/net/usb/int51x1.c +++ b/drivers/net/usb/int51x1.c @@ -236,6 +236,7 @@ static struct usb_driver int51x1_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(int51x1_driver); diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index 32519e5a7b97..964031e3da87 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -554,6 +554,7 @@ static struct usb_driver ipheth_driver = { .probe = ipheth_probe, .disconnect = ipheth_disconnect, .id_table = ipheth_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(ipheth_driver); diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index 7562649b3d6b..92c49e0a59ec 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -372,7 +372,8 @@ static struct usb_driver kalmia_driver = { .probe = usbnet_probe, .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, - .resume = usbnet_resume + .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(kalmia_driver); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index b8baf0858515..d8ad55284389 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -179,6 +179,7 @@ static struct usb_driver kaweth_driver = { .resume = kaweth_resume, .id_table = usb_klsi_table, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; typedef __u8 eth_addr_t[6]; diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c index 45a981fde43f..808d6506da41 100644 --- a/drivers/net/usb/lg-vl600.c +++ b/drivers/net/usb/lg-vl600.c @@ -344,6 +344,7 @@ static struct usb_driver lg_vl600_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(lg_vl600_driver); diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index c434b6ba0337..add1064f755d 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -690,6 +690,7 @@ static struct usb_driver mcs7830_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .reset_resume = mcs7830_reset_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(mcs7830_driver); diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c index 83f965cb69e7..28c4d513ba85 100644 --- a/drivers/net/usb/net1080.c +++ b/drivers/net/usb/net1080.c @@ -587,6 +587,7 @@ static struct usb_driver net1080_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(net1080_driver); diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 752393092325..7023220456c5 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1489,6 +1489,7 @@ static struct usb_driver pegasus_driver = { .id_table = pegasus_ids, .suspend = pegasus_suspend, .resume = pegasus_resume, + .disable_hub_initiated_lpm = 1, }; static void __init parse_id(char *id) diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index b2b035e29978..4584b9a805b3 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -152,6 +152,7 @@ static struct usb_driver plusb_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(plusb_driver); diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index d316503b35d4..9048efed46db 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -525,6 +525,7 @@ static struct usb_driver qmi_wwan_driver = { .resume = qmi_wwan_resume, .reset_resume = qmi_wwan_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; static int __init qmi_wwan_init(void) diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index c8f1b5b3aff3..446d074ad7d0 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -633,6 +633,7 @@ static struct usb_driver rndis_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rndis_driver); diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 65854cdcedc8..0e2c92e0e532 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -948,7 +948,8 @@ static struct usb_driver rtl8150_driver = { .disconnect = rtl8150_disconnect, .id_table = rtl8150_table, .suspend = rtl8150_suspend, - .resume = rtl8150_resume + .resume = rtl8150_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rtl8150_driver); diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index b59cf20c7817..3faef5670d1f 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -982,6 +982,7 @@ static struct usb_driver sierra_net_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .no_dynamic_id = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(sierra_net_driver); diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 00103a8c5e04..1fb4ddb2ccbf 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1250,6 +1250,7 @@ static struct usb_driver smsc75xx_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .disconnect = usbnet_disconnect, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(smsc75xx_driver); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 94ae66999f59..b1112e753859 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1297,6 +1297,7 @@ static struct usb_driver smsc95xx_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .disconnect = usbnet_disconnect, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(smsc95xx_driver); diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 34db195fb8b0..35c90307d473 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -377,6 +377,7 @@ static struct usb_driver zaurus_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(zaurus_driver); diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index cc741b3cc024..9dcd49cfab94 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -2486,6 +2486,7 @@ static struct usb_driver at76_driver = { .probe = at76_probe, .disconnect = at76_disconnect, .id_table = dev_table, + .disable_hub_initiated_lpm = 1, }; static int __init at76_mod_init(void) diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c index 325b1224c2b1..f8a27db69c7f 100644 --- a/drivers/net/wireless/ath/ath6kl/usb.c +++ b/drivers/net/wireless/ath/ath6kl/usb.c @@ -405,6 +405,7 @@ static struct usb_driver ath6kl_usb_driver = { .probe = ath6kl_usb_probe, .disconnect = ath6kl_usb_remove, .id_table = ath6kl_usb_ids, + .disable_hub_initiated_lpm = 1, }; static int ath6kl_usb_init(void) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 424aabb2c730..dea53dea9a53 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1356,6 +1356,7 @@ static struct usb_driver ath9k_hif_usb_driver = { #endif .id_table = ath9k_hif_usb_ids, .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, }; int ath9k_hif_usb_init(void) diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 89821e4835c7..888152ce3eca 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -1159,6 +1159,7 @@ static struct usb_driver carl9170_driver = { .resume = carl9170_usb_resume, .reset_resume = carl9170_usb_resume, #endif /* CONFIG_PM */ + .disable_hub_initiated_lpm = 1, }; module_usb_driver(carl9170_driver); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 82364223e817..8852d23ef829 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1605,6 +1605,7 @@ static struct usb_driver brcmf_usbdrvr = { .suspend = brcmf_usb_suspend, .resume = brcmf_usb_resume, .supports_autosuspend = 1 + .disable_hub_initiated_lpm = 1, }; void brcmf_usb_exit(void) diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 74da5f1ea243..76ea66d53b9c 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -1180,6 +1180,7 @@ static struct usb_driver if_usb_driver = { .suspend = if_usb_suspend, .resume = if_usb_resume, .reset_resume = if_usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(if_usb_driver); diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 7ced130f4f9e..19a5a92dd779 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -920,6 +920,7 @@ static struct usb_driver if_usb_driver = { .id_table = if_usb_table, .suspend = if_usb_suspend, .resume = if_usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(if_usb_driver); diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index f634d4582bfe..7f53cea2f205 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -1752,6 +1752,7 @@ static struct usb_driver orinoco_driver = { .probe = ezusb_probe, .disconnect = ezusb_disconnect, .id_table = ezusb_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(orinoco_driver); diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index f4d28c39aac7..d14dc81820e3 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -1081,6 +1081,7 @@ static struct usb_driver p54u_driver = { .reset_resume = p54u_resume, #endif /* CONFIG_PM */ .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(p54u_driver); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index d66e2980bc27..748a89de50d0 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -3776,6 +3776,7 @@ static struct usb_driver rndis_wlan_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rndis_wlan_driver); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 1de9c752c88b..d432e49ed6cd 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1980,6 +1980,7 @@ static struct usb_driver rt2500usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rt2500usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 001735f7a661..d60d4e2772e6 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1293,6 +1293,7 @@ static struct usb_driver rt2800usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rt2800usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index e477a964081d..f813de6cd1b7 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2526,6 +2526,7 @@ static struct usb_driver rt73usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rt73usb_driver); diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index cf53ac9d6f23..c2d2a21dd452 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -1662,6 +1662,7 @@ static struct usb_driver rtl8187_driver = { .id_table = rtl8187_table, .probe = rtl8187_probe, .disconnect = __devexit_p(rtl8187_disconnect), + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rtl8187_driver); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 82c85286ab2e..0face8b7e524 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -372,6 +372,7 @@ static struct usb_driver rtl8192cu_driver = { #ifdef CONFIG_AUTOSUSPEND .supports_autosuspend = 1, #endif + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rtl8192cu_driver); diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index a66b93b7ff9a..48273dd05b63 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1905,6 +1905,7 @@ static struct usb_driver zd1201_usb = { .id_table = zd1201_table, .suspend = zd1201_suspend, .resume = zd1201_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(zd1201_usb); diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index f766b3e67c6d..af83c43bcdb1 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1542,6 +1542,7 @@ static struct usb_driver driver = { .disconnect = disconnect, .pre_reset = pre_reset, .post_reset = post_reset, + .disable_hub_initiated_lpm = 1, }; struct workqueue_struct *zd_workqueue; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b32ccb461019..f2a120eea9d4 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1664,6 +1664,7 @@ static struct usb_driver acm_driver = { #ifdef CONFIG_PM .supports_autosuspend = 1, #endif + .disable_hub_initiated_lpm = 1, }; /* diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 631bb952d0f6..ea8b304f0e85 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -1034,6 +1034,7 @@ static struct usb_driver wdm_driver = { .post_reset = wdm_post_reset, .id_table = wdm_ids, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(wdm_driver); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f6f81c85c5cf..f536aebc958e 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -288,6 +288,7 @@ static int usb_probe_interface(struct device *dev) struct usb_device *udev = interface_to_usbdev(intf); const struct usb_device_id *id; int error = -ENODEV; + int lpm_disable_error; dev_dbg(dev, "%s\n", __func__); @@ -324,6 +325,25 @@ static int usb_probe_interface(struct device *dev) if (driver->supports_autosuspend) pm_runtime_enable(dev); + /* If the new driver doesn't allow hub-initiated LPM, and we can't + * disable hub-initiated LPM, then fail the probe. + * + * Otherwise, leaving LPM enabled should be harmless, because the + * endpoint intervals should remain the same, and the U1/U2 timeouts + * should remain the same. + * + * If we need to install alt setting 0 before probe, or another alt + * setting during probe, that should also be fine. usb_set_interface() + * will attempt to disable LPM, and fail if it can't disable it. + */ + lpm_disable_error = usb_unlocked_disable_lpm(udev); + if (lpm_disable_error && driver->disable_hub_initiated_lpm) { + dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.", + __func__, driver->name); + error = lpm_disable_error; + goto err; + } + /* Carry out a deferred switch to altsetting 0 */ if (intf->needs_altsetting0) { error = usb_set_interface(udev, intf->altsetting[0]. @@ -338,6 +358,11 @@ static int usb_probe_interface(struct device *dev) goto err; intf->condition = USB_INTERFACE_BOUND; + + /* If the LPM disable succeeded, balance the ref counts. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + usb_autosuspend_device(udev); return error; @@ -361,7 +386,7 @@ static int usb_unbind_interface(struct device *dev) struct usb_driver *driver = to_usb_driver(dev->driver); struct usb_interface *intf = to_usb_interface(dev); struct usb_device *udev; - int error, r; + int error, r, lpm_disable_error; intf->condition = USB_INTERFACE_UNBINDING; @@ -369,6 +394,13 @@ static int usb_unbind_interface(struct device *dev) udev = interface_to_usbdev(intf); error = usb_autoresume_device(udev); + /* Hub-initiated LPM policy may change, so attempt to disable LPM until + * the driver is unbound. If LPM isn't disabled, that's fine because it + * wouldn't be enabled unless all the bound interfaces supported + * hub-initiated LPM. + */ + lpm_disable_error = usb_unlocked_disable_lpm(udev); + /* Terminate all URBs for this interface unless the driver * supports "soft" unbinding. */ @@ -402,6 +434,10 @@ static int usb_unbind_interface(struct device *dev) intf->condition = USB_INTERFACE_UNBOUND; intf->needs_remote_wakeup = 0; + /* Attempt to re-enable USB3 LPM, if the disable succeeded. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ if (driver->supports_autosuspend) pm_runtime_disable(dev); @@ -442,17 +478,29 @@ int usb_driver_claim_interface(struct usb_driver *driver, struct usb_interface *iface, void *priv) { struct device *dev = &iface->dev; + struct usb_device *udev; int retval = 0; + int lpm_disable_error; if (dev->driver) return -EBUSY; + udev = interface_to_usbdev(iface); + dev->driver = &driver->drvwrap.driver; usb_set_intfdata(iface, priv); iface->needs_binding = 0; iface->condition = USB_INTERFACE_BOUND; + /* Disable LPM until this driver is bound. */ + lpm_disable_error = usb_unlocked_disable_lpm(udev); + if (lpm_disable_error && driver->disable_hub_initiated_lpm) { + dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.", + __func__, driver->name); + return -ENOMEM; + } + /* Claimed interfaces are initially inactive (suspended) and * runtime-PM-enabled, but only if the driver has autosuspend * support. Otherwise they are marked active, to prevent the @@ -471,6 +519,10 @@ int usb_driver_claim_interface(struct usb_driver *driver, if (device_is_registered(dev)) retval = device_bind_driver(dev); + /* Attempt to re-enable USB3 LPM, if the disable was successful. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + return retval; } EXPORT_SYMBOL_GPL(usb_driver_claim_interface); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0cd2daacacbe..190b1ec7bdcb 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -997,6 +997,15 @@ static int register_root_hub(struct usb_hcd *hcd) dev_name(&usb_dev->dev), retval); return (retval < 0) ? retval : -EMSGSIZE; } + if (usb_dev->speed == USB_SPEED_SUPER) { + retval = usb_get_bos_descriptor(usb_dev); + if (retval < 0) { + mutex_unlock(&usb_bus_list_lock); + dev_dbg(parent_dev, "can't read %s bos descriptor %d\n", + dev_name(&usb_dev->dev), retval); + return retval; + } + } retval = usb_new_device (usb_dev); if (retval) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index ec6c97dadbe4..fcc244e9056f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -177,6 +177,228 @@ static struct usb_hub *hdev_to_hub(struct usb_device *hdev) return usb_get_intfdata(hdev->actconfig->interface[0]); } +static int usb_device_supports_lpm(struct usb_device *udev) +{ + /* USB 2.1 (and greater) devices indicate LPM support through + * their USB 2.0 Extended Capabilities BOS descriptor. + */ + if (udev->speed == USB_SPEED_HIGH) { + if (udev->bos->ext_cap && + (USB_LPM_SUPPORT & + le32_to_cpu(udev->bos->ext_cap->bmAttributes))) + return 1; + return 0; + } + + /* All USB 3.0 must support LPM, but we need their max exit latency + * information from the SuperSpeed Extended Capabilities BOS descriptor. + */ + if (!udev->bos->ss_cap) { + dev_warn(&udev->dev, "No LPM exit latency info found. " + "Power management will be impacted.\n"); + return 0; + } + if (udev->parent->lpm_capable) + return 1; + + dev_warn(&udev->dev, "Parent hub missing LPM exit latency info. " + "Power management will be impacted.\n"); + return 0; +} + +/* + * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from + * either U1 or U2. + */ +static void usb_set_lpm_mel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params, + unsigned int udev_exit_latency, + struct usb_hub *hub, + struct usb3_lpm_parameters *hub_lpm_params, + unsigned int hub_exit_latency) +{ + unsigned int total_mel; + unsigned int device_mel; + unsigned int hub_mel; + + /* + * Calculate the time it takes to transition all links from the roothub + * to the parent hub into U0. The parent hub must then decode the + * packet (hub header decode latency) to figure out which port it was + * bound for. + * + * The Hub Header decode latency is expressed in 0.1us intervals (0x1 + * means 0.1us). Multiply that by 100 to get nanoseconds. + */ + total_mel = hub_lpm_params->mel + + (hub->descriptor->u.ss.bHubHdrDecLat * 100); + + /* + * How long will it take to transition the downstream hub's port into + * U0? The greater of either the hub exit latency or the device exit + * latency. + * + * The BOS U1/U2 exit latencies are expressed in 1us intervals. + * Multiply that by 1000 to get nanoseconds. + */ + device_mel = udev_exit_latency * 1000; + hub_mel = hub_exit_latency * 1000; + if (device_mel > hub_mel) + total_mel += device_mel; + else + total_mel += hub_mel; + + udev_lpm_params->mel = total_mel; +} + +/* + * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate + * a transition from either U1 or U2. + */ +static void usb_set_lpm_pel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params, + unsigned int udev_exit_latency, + struct usb_hub *hub, + struct usb3_lpm_parameters *hub_lpm_params, + unsigned int hub_exit_latency, + unsigned int port_to_port_exit_latency) +{ + unsigned int first_link_pel; + unsigned int hub_pel; + + /* + * First, the device sends an LFPS to transition the link between the + * device and the parent hub into U0. The exit latency is the bigger of + * the device exit latency or the hub exit latency. + */ + if (udev_exit_latency > hub_exit_latency) + first_link_pel = udev_exit_latency * 1000; + else + first_link_pel = hub_exit_latency * 1000; + + /* + * When the hub starts to receive the LFPS, there is a slight delay for + * it to figure out that one of the ports is sending an LFPS. Then it + * will forward the LFPS to its upstream link. The exit latency is the + * delay, plus the PEL that we calculated for this hub. + */ + hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel; + + /* + * According to figure C-7 in the USB 3.0 spec, the PEL for this device + * is the greater of the two exit latencies. + */ + if (first_link_pel > hub_pel) + udev_lpm_params->pel = first_link_pel; + else + udev_lpm_params->pel = hub_pel; +} + +/* + * Set the System Exit Latency (SEL) to indicate the total worst-case time from + * when a device initiates a transition to U0, until when it will receive the + * first packet from the host controller. + * + * Section C.1.5.1 describes the four components to this: + * - t1: device PEL + * - t2: time for the ERDY to make it from the device to the host. + * - t3: a host-specific delay to process the ERDY. + * - t4: time for the packet to make it from the host to the device. + * + * t3 is specific to both the xHCI host and the platform the host is integrated + * into. The Intel HW folks have said it's negligible, FIXME if a different + * vendor says otherwise. + */ +static void usb_set_lpm_sel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params) +{ + struct usb_device *parent; + unsigned int num_hubs; + unsigned int total_sel; + + /* t1 = device PEL */ + total_sel = udev_lpm_params->pel; + /* How many external hubs are in between the device & the root port. */ + for (parent = udev->parent, num_hubs = 0; parent->parent; + parent = parent->parent) + num_hubs++; + /* t2 = 2.1us + 250ns * (num_hubs - 1) */ + if (num_hubs > 0) + total_sel += 2100 + 250 * (num_hubs - 1); + + /* t4 = 250ns * num_hubs */ + total_sel += 250 * num_hubs; + + udev_lpm_params->sel = total_sel; +} + +static void usb_set_lpm_parameters(struct usb_device *udev) +{ + struct usb_hub *hub; + unsigned int port_to_port_delay; + unsigned int udev_u1_del; + unsigned int udev_u2_del; + unsigned int hub_u1_del; + unsigned int hub_u2_del; + + if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER) + return; + + hub = hdev_to_hub(udev->parent); + /* It doesn't take time to transition the roothub into U0, since it + * doesn't have an upstream link. + */ + if (!hub) + return; + + udev_u1_del = udev->bos->ss_cap->bU1devExitLat; + udev_u2_del = udev->bos->ss_cap->bU2DevExitLat; + hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat; + hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat; + + usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del, + hub, &udev->parent->u1_params, hub_u1_del); + + usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del, + hub, &udev->parent->u2_params, hub_u2_del); + + /* + * Appendix C, section C.2.2.2, says that there is a slight delay from + * when the parent hub notices the downstream port is trying to + * transition to U0 to when the hub initiates a U0 transition on its + * upstream port. The section says the delays are tPort2PortU1EL and + * tPort2PortU2EL, but it doesn't define what they are. + * + * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking + * about the same delays. Use the maximum delay calculations from those + * sections. For U1, it's tHubPort2PortExitLat, which is 1us max. For + * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat. I + * assume the device exit latencies they are talking about are the hub + * exit latencies. + * + * What do we do if the U2 exit latency is less than the U1 exit + * latency? It's possible, although not likely... + */ + port_to_port_delay = 1; + + usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del, + hub, &udev->parent->u1_params, hub_u1_del, + port_to_port_delay); + + if (hub_u2_del > hub_u1_del) + port_to_port_delay = 1 + hub_u2_del - hub_u1_del; + else + port_to_port_delay = 1 + hub_u1_del; + + usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del, + hub, &udev->parent->u2_params, hub_u2_del, + port_to_port_delay); + + /* Now that we've got PEL, calculate SEL. */ + usb_set_lpm_sel(udev, &udev->u1_params); + usb_set_lpm_sel(udev, &udev->u2_params); +} + /* USB 2.0 spec Section 11.24.4.5 */ static int get_hub_descriptor(struct usb_device *hdev, void *data) { @@ -2480,6 +2702,12 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) if (udev->usb2_hw_lpm_enabled == 1) usb_set_usb2_hardware_lpm(udev, 0); + if (usb_unlocked_disable_lpm(udev)) { + dev_err(&udev->dev, "%s Failed to disable LPM before suspend\n.", + __func__); + return -ENOMEM; + } + /* see 7.1.7.6 */ if (hub_is_superspeed(hub->hdev)) status = set_port_feature(hub->hdev, @@ -2499,6 +2727,13 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) NULL, 0, USB_CTRL_SET_TIMEOUT); + /* Try to enable USB2 hardware LPM again */ + if (udev->usb2_hw_lpm_capable == 1) + usb_set_usb2_hardware_lpm(udev, 1); + + /* Try to enable USB3 LPM again */ + usb_unlocked_enable_lpm(udev); + /* System sleep transitions should never fail */ if (!PMSG_IS_AUTO(msg)) status = 0; @@ -2696,6 +2931,9 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) /* Try to enable USB2 hardware LPM */ if (udev->usb2_hw_lpm_capable == 1) usb_set_usb2_hardware_lpm(udev, 1); + + /* Try to enable USB3 LPM */ + usb_unlocked_enable_lpm(udev); } return status; @@ -2824,11 +3062,425 @@ void usb_root_hub_lost_power(struct usb_device *rhdev) } EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); +static const char * const usb3_lpm_names[] = { + "U0", + "U1", + "U2", + "U3", +}; + +/* + * Send a Set SEL control transfer to the device, prior to enabling + * device-initiated U1 or U2. This lets the device know the exit latencies from + * the time the device initiates a U1 or U2 exit, to the time it will receive a + * packet from the host. + * + * This function will fail if the SEL or PEL values for udev are greater than + * the maximum allowed values for the link state to be enabled. + */ +static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) +{ + struct usb_set_sel_req *sel_values; + unsigned long long u1_sel; + unsigned long long u1_pel; + unsigned long long u2_sel; + unsigned long long u2_pel; + int ret; + + /* Convert SEL and PEL stored in ns to us */ + u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); + u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); + u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); + u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000); + + /* + * Make sure that the calculated SEL and PEL values for the link + * state we're enabling aren't bigger than the max SEL/PEL + * value that will fit in the SET SEL control transfer. + * Otherwise the device would get an incorrect idea of the exit + * latency for the link state, and could start a device-initiated + * U1/U2 when the exit latencies are too high. + */ + if ((state == USB3_LPM_U1 && + (u1_sel > USB3_LPM_MAX_U1_SEL_PEL || + u1_pel > USB3_LPM_MAX_U1_SEL_PEL)) || + (state == USB3_LPM_U2 && + (u2_sel > USB3_LPM_MAX_U2_SEL_PEL || + u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) { + dev_dbg(&udev->dev, "Device-initiated %s disabled due " + "to long SEL %llu ms or PEL %llu ms\n", + usb3_lpm_names[state], u1_sel, u1_pel); + return -EINVAL; + } + + /* + * If we're enabling device-initiated LPM for one link state, + * but the other link state has a too high SEL or PEL value, + * just set those values to the max in the Set SEL request. + */ + if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL) + u1_sel = USB3_LPM_MAX_U1_SEL_PEL; + + if (u1_pel > USB3_LPM_MAX_U1_SEL_PEL) + u1_pel = USB3_LPM_MAX_U1_SEL_PEL; + + if (u2_sel > USB3_LPM_MAX_U2_SEL_PEL) + u2_sel = USB3_LPM_MAX_U2_SEL_PEL; + + if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL) + u2_pel = USB3_LPM_MAX_U2_SEL_PEL; + + /* + * usb_enable_lpm() can be called as part of a failed device reset, + * which may be initiated by an error path of a mass storage driver. + * Therefore, use GFP_NOIO. + */ + sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO); + if (!sel_values) + return -ENOMEM; + + sel_values->u1_sel = u1_sel; + sel_values->u1_pel = u1_pel; + sel_values->u2_sel = cpu_to_le16(u2_sel); + sel_values->u2_pel = cpu_to_le16(u2_pel); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_SEL, + USB_RECIP_DEVICE, + 0, 0, + sel_values, sizeof *(sel_values), + USB_CTRL_SET_TIMEOUT); + kfree(sel_values); + return ret; +} + +/* + * Enable or disable device-initiated U1 or U2 transitions. + */ +static int usb_set_device_initiated_lpm(struct usb_device *udev, + enum usb3_link_state state, bool enable) +{ + int ret; + int feature; + + switch (state) { + case USB3_LPM_U1: + feature = USB_DEVICE_U1_ENABLE; + break; + case USB3_LPM_U2: + feature = USB_DEVICE_U2_ENABLE; + break; + default: + dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n", + __func__, enable ? "enable" : "disable"); + return -EINVAL; + } + + if (udev->state != USB_STATE_CONFIGURED) { + dev_dbg(&udev->dev, "%s: Can't %s %s state " + "for unconfigured device.\n", + __func__, enable ? "enable" : "disable", + usb3_lpm_names[state]); + return 0; + } + + if (enable) { + /* + * First, let the device know about the exit latencies + * associated with the link state we're about to enable. + */ + ret = usb_req_set_sel(udev, state); + if (ret < 0) { + dev_warn(&udev->dev, "Set SEL for device-initiated " + "%s failed.\n", usb3_lpm_names[state]); + return -EBUSY; + } + /* + * Now send the control transfer to enable device-initiated LPM + * for either U1 or U2. + */ + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, + USB_RECIP_DEVICE, + feature, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, + USB_RECIP_DEVICE, + feature, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + } + if (ret < 0) { + dev_warn(&udev->dev, "%s of device-initiated %s failed.\n", + enable ? "Enable" : "Disable", + usb3_lpm_names[state]); + return -EBUSY; + } + return 0; +} + +static int usb_set_lpm_timeout(struct usb_device *udev, + enum usb3_link_state state, int timeout) +{ + int ret; + int feature; + + switch (state) { + case USB3_LPM_U1: + feature = USB_PORT_FEAT_U1_TIMEOUT; + break; + case USB3_LPM_U2: + feature = USB_PORT_FEAT_U2_TIMEOUT; + break; + default: + dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n", + __func__); + return -EINVAL; + } + + if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT && + timeout != USB3_LPM_DEVICE_INITIATED) { + dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, " + "which is a reserved value.\n", + usb3_lpm_names[state], timeout); + return -EINVAL; + } + + ret = set_port_feature(udev->parent, + USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum, + feature); + if (ret < 0) { + dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x," + "error code %i\n", usb3_lpm_names[state], + timeout, ret); + return -EBUSY; + } + if (state == USB3_LPM_U1) + udev->u1_params.timeout = timeout; + else + udev->u2_params.timeout = timeout; + return 0; +} + +/* + * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated + * U1/U2 entry. + * + * We will attempt to enable U1 or U2, but there are no guarantees that the + * control transfers to set the hub timeout or enable device-initiated U1/U2 + * will be successful. + * + * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI + * driver know about it. If that call fails, it should be harmless, and just + * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency. + */ +static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, + enum usb3_link_state state) +{ + int timeout; + + /* We allow the host controller to set the U1/U2 timeout internally + * first, so that it can change its schedule to account for the + * additional latency to send data to a device in a lower power + * link state. + */ + timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state); + + /* xHCI host controller doesn't want to enable this LPM state. */ + if (timeout == 0) + return; + + if (timeout < 0) { + dev_warn(&udev->dev, "Could not enable %s link state, " + "xHCI error %i.\n", usb3_lpm_names[state], + timeout); + return; + } + + if (usb_set_lpm_timeout(udev, state, timeout)) + /* If we can't set the parent hub U1/U2 timeout, + * device-initiated LPM won't be allowed either, so let the xHCI + * host know that this link state won't be enabled. + */ + hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + + /* Only a configured device will accept the Set Feature U1/U2_ENABLE */ + else if (udev->actconfig) + usb_set_device_initiated_lpm(udev, state, true); + +} + +/* + * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated + * U1/U2 entry. + * + * If this function returns -EBUSY, the parent hub will still allow U1/U2 entry. + * If zero is returned, the parent will not allow the link to go into U1/U2. + * + * If zero is returned, device-initiated U1/U2 entry may still be enabled, but + * it won't have an effect on the bus link state because the parent hub will + * still disallow device-initiated U1/U2 entry. + * + * If zero is returned, the xHCI host controller may still think U1/U2 entry is + * possible. The result will be slightly more bus bandwidth will be taken up + * (to account for U1/U2 exit latency), but it should be harmless. + */ +static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, + enum usb3_link_state state) +{ + int feature; + + switch (state) { + case USB3_LPM_U1: + feature = USB_PORT_FEAT_U1_TIMEOUT; + break; + case USB3_LPM_U2: + feature = USB_PORT_FEAT_U2_TIMEOUT; + break; + default: + dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n", + __func__); + return -EINVAL; + } + + if (usb_set_lpm_timeout(udev, state, 0)) + return -EBUSY; + + usb_set_device_initiated_lpm(udev, state, false); + + if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state)) + dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " + "bus schedule bandwidth may be impacted.\n", + usb3_lpm_names[state]); + return 0; +} + +/* + * Disable hub-initiated and device-initiated U1 and U2 entry. + * Caller must own the bandwidth_mutex. + * + * This will call usb_enable_lpm() on failure, which will decrement + * lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero. + */ +int usb_disable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd; + + if (!udev || !udev->parent || + udev->speed != USB_SPEED_SUPER || + !udev->lpm_capable) + return 0; + + hcd = bus_to_hcd(udev->bus); + if (!hcd || !hcd->driver->disable_usb3_lpm_timeout) + return 0; + + udev->lpm_disable_count++; + if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0)) + return 0; + + /* If LPM is enabled, attempt to disable it. */ + if (usb_disable_link_state(hcd, udev, USB3_LPM_U1)) + goto enable_lpm; + if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) + goto enable_lpm; + + return 0; + +enable_lpm: + usb_enable_lpm(udev); + return -EBUSY; +} +EXPORT_SYMBOL_GPL(usb_disable_lpm); + +/* Grab the bandwidth_mutex before calling usb_disable_lpm() */ +int usb_unlocked_disable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int ret; + + if (!hcd) + return -EINVAL; + + mutex_lock(hcd->bandwidth_mutex); + ret = usb_disable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm); + +/* + * Attempt to enable device-initiated and hub-initiated U1 and U2 entry. The + * xHCI host policy may prevent U1 or U2 from being enabled. + * + * Other callers may have disabled link PM, so U1 and U2 entry will be disabled + * until the lpm_disable_count drops to zero. Caller must own the + * bandwidth_mutex. + */ +void usb_enable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd; + + if (!udev || !udev->parent || + udev->speed != USB_SPEED_SUPER || + !udev->lpm_capable) + return; + + udev->lpm_disable_count--; + hcd = bus_to_hcd(udev->bus); + /* Double check that we can both enable and disable LPM. + * Device must be configured to accept set feature U1/U2 timeout. + */ + if (!hcd || !hcd->driver->enable_usb3_lpm_timeout || + !hcd->driver->disable_usb3_lpm_timeout) + return; + + if (udev->lpm_disable_count > 0) + return; + + usb_enable_link_state(hcd, udev, USB3_LPM_U1); + usb_enable_link_state(hcd, udev, USB3_LPM_U2); +} +EXPORT_SYMBOL_GPL(usb_enable_lpm); + +/* Grab the bandwidth_mutex before calling usb_enable_lpm() */ +void usb_unlocked_enable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (!hcd) + return; + + mutex_lock(hcd->bandwidth_mutex); + usb_enable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); +} +EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); + + #else /* CONFIG_PM */ #define hub_suspend NULL #define hub_resume NULL #define hub_reset_resume NULL + +int usb_disable_lpm(struct usb_device *udev) +{ + return 0; +} + +void usb_enable_lpm(struct usb_device *udev) { } + +int usb_unlocked_disable_lpm(struct usb_device *udev) +{ + return 0; +} + +void usb_unlocked_enable_lpm(struct usb_device *udev) { } #endif @@ -3208,9 +3860,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { retval = usb_get_bos_descriptor(udev); if (!retval) { - if (udev->bos->ext_cap && (USB_LPM_SUPPORT & - le32_to_cpu(udev->bos->ext_cap->bmAttributes))) - udev->lpm_capable = 1; + udev->lpm_capable = usb_device_supports_lpm(udev); + usb_set_lpm_parameters(udev); } } @@ -4042,11 +4693,22 @@ static int usb_reset_and_verify_device(struct usb_device *udev) goto done; mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM while we reset the device and reinstall the alt settings. + * Device-initiated LPM settings, and system exit latency settings are + * cleared when the device is reset, so we have to set them up again. + */ + ret = usb_disable_lpm(udev); + if (ret) { + dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + goto done; + } ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL); if (ret < 0) { dev_warn(&udev->dev, "Busted HC? Not enough HCD resources for " "old configuration.\n"); + usb_enable_lpm(udev); mutex_unlock(hcd->bandwidth_mutex); goto re_enumerate; } @@ -4058,6 +4720,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) dev_err(&udev->dev, "can't restore configuration #%d (error=%d)\n", udev->actconfig->desc.bConfigurationValue, ret); + usb_enable_lpm(udev); mutex_unlock(hcd->bandwidth_mutex); goto re_enumerate; } @@ -4096,10 +4759,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev) desc->bInterfaceNumber, desc->bAlternateSetting, ret); + usb_unlocked_enable_lpm(udev); goto re_enumerate; } } + /* Now that the alt settings are re-installed, enable LPM. */ + usb_unlocked_enable_lpm(udev); done: return 0; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index ca717da3be95..b548cf1dbc62 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1308,10 +1308,19 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) * Remove the current alt setting and add the new alt setting. */ mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the new alt setting is installed, + * so that the xHCI driver can recalculate the U1/U2 timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&iface->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt); if (ret < 0) { dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n", alternate); + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return ret; } @@ -1334,6 +1343,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) } else if (ret < 0) { /* Re-instate the old alt setting */ usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting); + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return ret; } @@ -1354,6 +1364,9 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) iface->cur_altsetting = alt; + /* Now that the interface is installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + /* If the interface only has one altsetting and the device didn't * accept the request, we attempt to carry out the equivalent action * by manually clearing the HALT feature for each endpoint in the @@ -1437,6 +1450,14 @@ int usb_reset_configuration(struct usb_device *dev) config = dev->actconfig; retval = 0; mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the configuration is reset, so + * that the xHCI driver can recalculate the U1/U2 timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } /* Make sure we have enough bandwidth for each alternate setting 0 */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; @@ -1465,6 +1486,7 @@ reset_old_alts: usb_hcd_alloc_bandwidth(dev, NULL, alt, intf->cur_altsetting); } + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return retval; } @@ -1502,6 +1524,8 @@ reset_old_alts: create_intf_ep_devs(intf); } } + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); return 0; } EXPORT_SYMBOL_GPL(usb_reset_configuration); @@ -1763,8 +1787,18 @@ free_interfaces: * this call fails, the device state is unchanged. */ mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the new configuration is + * installed, so that the xHCI driver can recalculate the U1/U2 + * timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); usb_autosuspend_device(dev); goto free_interfaces; @@ -1784,6 +1818,7 @@ free_interfaces: if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); usb_autosuspend_device(dev); goto free_interfaces; @@ -1838,6 +1873,9 @@ free_interfaces: !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) cp->string = usb_cache_string(dev, cp->desc.iConfiguration); + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + /* Now that all the interfaces are set up, register them * to trigger binding of drivers to interfaces. probe() * routines may install different altsettings and may diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 89850a82d51b..2732ef660c5c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -475,6 +475,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; + u16 timeout = 0; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -623,6 +624,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, link_state = (wIndex & 0xff00) >> 3; if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) wake_mask = wIndex & 0xff00; + /* The MSB of wIndex is the U1/U2 timeout */ + timeout = (wIndex & 0xff00) >> 8; wIndex &= 0xff; if (!wIndex || wIndex > max_ports) goto error; @@ -747,6 +750,22 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); break; + case USB_PORT_FEAT_U1_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = xhci_readl(xhci, port_array[wIndex] + 1); + temp &= ~PORT_U1_TIMEOUT_MASK; + temp |= PORT_U1_TIMEOUT(timeout); + xhci_writel(xhci, temp, port_array[wIndex] + 1); + break; + case USB_PORT_FEAT_U2_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = xhci_readl(xhci, port_array[wIndex] + 1); + temp &= ~PORT_U2_TIMEOUT_MASK; + temp |= PORT_U2_TIMEOUT(timeout); + xhci_writel(xhci, temp, port_array[wIndex] + 1); + break; default: goto error; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 68eaa908ac8e..ec4338eec826 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1791,6 +1791,14 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; + struct list_head *tt_list_head; + struct list_head *tt; + struct list_head *endpoints; + struct list_head *ep, *q; + struct xhci_tt_bw_info *tt_info; + struct xhci_interval_bw_table *bwt; + struct xhci_virt_ep *virt_ep; + unsigned long flags; int size; int i; @@ -1807,6 +1815,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->event_ring = NULL; xhci_dbg(xhci, "Freed event ring\n"); + if (xhci->lpm_command) + xhci_free_command(xhci, xhci->lpm_command); + xhci->cmd_ring_reserved_trbs = 0; if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -1849,8 +1860,26 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + bwt = &xhci->rh_bw->bw_table; + for (i = 0; i < XHCI_MAX_INTERVAL; i++) { + endpoints = &bwt->interval_bw[i].endpoints; + list_for_each_safe(ep, q, endpoints) { + virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list); + list_del(&virt_ep->bw_endpoint_list); + kfree(virt_ep); + } + } + + tt_list_head = &xhci->rh_bw->tts; + list_for_each_safe(tt, q, tt_list_head) { + tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); + list_del(tt); + kfree(tt_info); + } + xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; + xhci->num_active_eps = 0; kfree(xhci->usb2_ports); kfree(xhci->usb3_ports); kfree(xhci->port_array); @@ -2350,6 +2379,16 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); xhci_dbg_cmd_ptrs(xhci); + xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags); + if (!xhci->lpm_command) + goto fail; + + /* Reserve one command ring TRB for disabling LPM. + * Since the USB core grabs the shared usb_bus bandwidth mutex before + * disabling LPM, we only need to reserve one TRB for all devices. + */ + xhci->cmd_ring_reserved_trbs++; + val = xhci_readl(xhci, &xhci->cap_regs->db_off); val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7a856a767e77..18b231b0c5d3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -72,6 +72,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u " "has broken MSI implementation\n", pdev->revision); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_NEC) @@ -83,6 +84,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_INTEL_HOST; + } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { xhci->quirks |= XHCI_SPURIOUS_SUCCESS; @@ -169,6 +174,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ + + /* We know the LPM timeout algorithms for this host, let the USB core + * enable and disable LPM for devices under the USB 3.0 roothub. + */ + if (xhci->quirks & XHCI_LPM_SUPPORT) + hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; + return 0; put_usb3_hcd: @@ -292,6 +304,8 @@ static const struct hc_driver xhci_pci_hc_driver = { */ .update_device = xhci_update_device, .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm, + .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout, + .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 329fd2a98dd6..23b4aefd1036 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1787,8 +1787,12 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, /* handle completion code */ switch (trb_comp_code) { case COMP_SUCCESS: - frame->status = 0; - break; + if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) { + frame->status = 0; + break; + } + if ((xhci->quirks & XHCI_TRUST_TX_LENGTH)) + trb_comp_code = COMP_SHORT_TX; case COMP_SHORT_TX: frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ? -EREMOTEIO : 0; @@ -1885,13 +1889,16 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, switch (trb_comp_code) { case COMP_SUCCESS: /* Double check that the HW transferred everything. */ - if (event_trb != td->last_trb) { + if (event_trb != td->last_trb || + TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) { xhci_warn(xhci, "WARN Successful completion " "on short TX\n"); if (td->urb->transfer_flags & URB_SHORT_NOT_OK) *status = -EREMOTEIO; else *status = 0; + if ((xhci->quirks & XHCI_TRUST_TX_LENGTH)) + trb_comp_code = COMP_SHORT_TX; } else { *status = 0; } @@ -2050,6 +2057,13 @@ static int handle_tx_event(struct xhci_hcd *xhci, * transfer type */ case COMP_SUCCESS: + if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) + break; + if (xhci->quirks & XHCI_TRUST_TX_LENGTH) + trb_comp_code = COMP_SHORT_TX; + else + xhci_warn(xhci, "WARN Successful completion on short TX: " + "needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: @@ -3595,12 +3609,12 @@ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, /* Queue an evaluate context command TRB */ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id) + u32 slot_id, bool command_must_succeed) { return queue_command(xhci, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), - false); + command_must_succeed); } /* diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 16c05c6b5afa..4ceba145fa88 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2446,7 +2446,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, udev->slot_id, must_succeed); else ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, - udev->slot_id); + udev->slot_id, must_succeed); if (ret < 0) { if (command) list_del(&command->cmd_list); @@ -3837,6 +3837,458 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, return 0; } +/*---------------------- USB 3.0 Link PM functions ------------------------*/ + +/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */ +static unsigned long long xhci_service_interval_to_ns( + struct usb_endpoint_descriptor *desc) +{ + return (1 << (desc->bInterval - 1)) * 125 * 1000; +} + +static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, + enum usb3_link_state state) +{ + unsigned long long sel; + unsigned long long pel; + unsigned int max_sel_pel; + char *state_name; + + switch (state) { + case USB3_LPM_U1: + /* Convert SEL and PEL stored in nanoseconds to microseconds */ + sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); + pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); + max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL; + state_name = "U1"; + break; + case USB3_LPM_U2: + sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); + pel = DIV_ROUND_UP(udev->u2_params.pel, 1000); + max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL; + state_name = "U2"; + break; + default: + dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n", + __func__); + return -EINVAL; + } + + if (sel <= max_sel_pel && pel <= max_sel_pel) + return USB3_LPM_DEVICE_INITIATED; + + if (sel > max_sel_pel) + dev_dbg(&udev->dev, "Device-initiated %s disabled " + "due to long SEL %llu ms\n", + state_name, sel); + else + dev_dbg(&udev->dev, "Device-initiated %s disabled " + "due to long PEL %llu\n ms", + state_name, pel); + return USB3_LPM_DISABLED; +} + +/* Returns the hub-encoded U1 timeout value. + * The U1 timeout should be the maximum of the following values: + * - For control endpoints, U1 system exit latency (SEL) * 3 + * - For bulk endpoints, U1 SEL * 5 + * - For interrupt endpoints: + * - Notification EPs, U1 SEL * 3 + * - Periodic EPs, max(105% of bInterval, U1 SEL * 2) + * - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2) + */ +static u16 xhci_calculate_intel_u1_timeout(struct usb_device *udev, + struct usb_endpoint_descriptor *desc) +{ + unsigned long long timeout_ns; + int ep_type; + int intr_type; + + ep_type = usb_endpoint_type(desc); + switch (ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + timeout_ns = udev->u1_params.sel * 3; + break; + case USB_ENDPOINT_XFER_BULK: + timeout_ns = udev->u1_params.sel * 5; + break; + case USB_ENDPOINT_XFER_INT: + intr_type = usb_endpoint_interrupt_type(desc); + if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) { + timeout_ns = udev->u1_params.sel * 3; + break; + } + /* Otherwise the calculation is the same as isoc eps */ + case USB_ENDPOINT_XFER_ISOC: + timeout_ns = xhci_service_interval_to_ns(desc); + timeout_ns = DIV_ROUND_UP(timeout_ns * 105, 100); + if (timeout_ns < udev->u1_params.sel * 2) + timeout_ns = udev->u1_params.sel * 2; + break; + default: + return 0; + } + + /* The U1 timeout is encoded in 1us intervals. */ + timeout_ns = DIV_ROUND_UP(timeout_ns, 1000); + /* Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */ + if (timeout_ns == USB3_LPM_DISABLED) + timeout_ns++; + + /* If the necessary timeout value is bigger than what we can set in the + * USB 3.0 hub, we have to disable hub-initiated U1. + */ + if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT) + return timeout_ns; + dev_dbg(&udev->dev, "Hub-initiated U1 disabled " + "due to long timeout %llu ms\n", timeout_ns); + return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1); +} + +/* Returns the hub-encoded U2 timeout value. + * The U2 timeout should be the maximum of: + * - 10 ms (to avoid the bandwidth impact on the scheduler) + * - largest bInterval of any active periodic endpoint (to avoid going + * into lower power link states between intervals). + * - the U2 Exit Latency of the device + */ +static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev, + struct usb_endpoint_descriptor *desc) +{ + unsigned long long timeout_ns; + unsigned long long u2_del_ns; + + timeout_ns = 10 * 1000 * 1000; + + if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) && + (xhci_service_interval_to_ns(desc) > timeout_ns)) + timeout_ns = xhci_service_interval_to_ns(desc); + + u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000; + if (u2_del_ns > timeout_ns) + timeout_ns = u2_del_ns; + + /* The U2 timeout is encoded in 256us intervals */ + timeout_ns = DIV_ROUND_UP(timeout_ns, 256 * 1000); + /* If the necessary timeout value is bigger than what we can set in the + * USB 3.0 hub, we have to disable hub-initiated U2. + */ + if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT) + return timeout_ns; + dev_dbg(&udev->dev, "Hub-initiated U2 disabled " + "due to long timeout %llu ms\n", timeout_ns); + return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2); +} + +static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_endpoint_descriptor *desc, + enum usb3_link_state state, + u16 *timeout) +{ + if (state == USB3_LPM_U1) { + if (xhci->quirks & XHCI_INTEL_HOST) + return xhci_calculate_intel_u1_timeout(udev, desc); + } else { + if (xhci->quirks & XHCI_INTEL_HOST) + return xhci_calculate_intel_u2_timeout(udev, desc); + } + + return USB3_LPM_DISABLED; +} + +static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_endpoint_descriptor *desc, + enum usb3_link_state state, + u16 *timeout) +{ + u16 alt_timeout; + + alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev, + desc, state, timeout); + + /* If we found we can't enable hub-initiated LPM, or + * the U1 or U2 exit latency was too high to allow + * device-initiated LPM as well, just stop searching. + */ + if (alt_timeout == USB3_LPM_DISABLED || + alt_timeout == USB3_LPM_DEVICE_INITIATED) { + *timeout = alt_timeout; + return -E2BIG; + } + if (alt_timeout > *timeout) + *timeout = alt_timeout; + return 0; +} + +static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_host_interface *alt, + enum usb3_link_state state, + u16 *timeout) +{ + int j; + + for (j = 0; j < alt->desc.bNumEndpoints; j++) { + if (xhci_update_timeout_for_endpoint(xhci, udev, + &alt->endpoint[j].desc, state, timeout)) + return -E2BIG; + continue; + } + return 0; +} + +static int xhci_check_intel_tier_policy(struct usb_device *udev, + enum usb3_link_state state) +{ + struct usb_device *parent; + unsigned int num_hubs; + + if (state == USB3_LPM_U2) + return 0; + + /* Don't enable U1 if the device is on a 2nd tier hub or lower. */ + for (parent = udev->parent, num_hubs = 0; parent->parent; + parent = parent->parent) + num_hubs++; + + if (num_hubs < 2) + return 0; + + dev_dbg(&udev->dev, "Disabling U1 link state for device" + " below second-tier hub.\n"); + dev_dbg(&udev->dev, "Plug device into first-tier hub " + "to decrease power consumption.\n"); + return -E2BIG; +} + +static int xhci_check_tier_policy(struct xhci_hcd *xhci, + struct usb_device *udev, + enum usb3_link_state state) +{ + if (xhci->quirks & XHCI_INTEL_HOST) + return xhci_check_intel_tier_policy(udev, state); + return -EINVAL; +} + +/* Returns the U1 or U2 timeout that should be enabled. + * If the tier check or timeout setting functions return with a non-zero exit + * code, that means the timeout value has been finalized and we shouldn't look + * at any more endpoints. + */ +static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_host_config *config; + char *state_name; + int i; + u16 timeout = USB3_LPM_DISABLED; + + if (state == USB3_LPM_U1) + state_name = "U1"; + else if (state == USB3_LPM_U2) + state_name = "U2"; + else { + dev_warn(&udev->dev, "Can't enable unknown link state %i\n", + state); + return timeout; + } + + if (xhci_check_tier_policy(xhci, udev, state) < 0) + return timeout; + + /* Gather some information about the currently installed configuration + * and alternate interface settings. + */ + if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc, + state, &timeout)) + return timeout; + + config = udev->actconfig; + if (!config) + return timeout; + + for (i = 0; i < USB_MAXINTERFACES; i++) { + struct usb_driver *driver; + struct usb_interface *intf = config->interface[i]; + + if (!intf) + continue; + + /* Check if any currently bound drivers want hub-initiated LPM + * disabled. + */ + if (intf->dev.driver) { + driver = to_usb_driver(intf->dev.driver); + if (driver && driver->disable_hub_initiated_lpm) { + dev_dbg(&udev->dev, "Hub-initiated %s disabled " + "at request of driver %s\n", + state_name, driver->name); + return xhci_get_timeout_no_hub_lpm(udev, state); + } + } + + /* Not sure how this could happen... */ + if (!intf->cur_altsetting) + continue; + + if (xhci_update_timeout_for_interface(xhci, udev, + intf->cur_altsetting, + state, &timeout)) + return timeout; + } + return timeout; +} + +/* + * Issue an Evaluate Context command to change the Maximum Exit Latency in the + * slot context. If that succeeds, store the new MEL in the xhci_virt_device. + */ +static int xhci_change_max_exit_latency(struct xhci_hcd *xhci, + struct usb_device *udev, u16 max_exit_latency) +{ + struct xhci_virt_device *virt_dev; + struct xhci_command *command; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + unsigned long flags; + int ret; + + spin_lock_irqsave(&xhci->lock, flags); + if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) { + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; + } + + /* Attempt to issue an Evaluate Context command to change the MEL. */ + virt_dev = xhci->devs[udev->slot_id]; + command = xhci->lpm_command; + xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx); + spin_unlock_irqrestore(&xhci->lock, flags); + + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); + slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx); + slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT)); + slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency); + + xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n"); + xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, command->in_ctx, 0); + + /* Issue and wait for the evaluate context command. */ + ret = xhci_configure_endpoint(xhci, udev, command, + true, true); + xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0); + + if (!ret) { + spin_lock_irqsave(&xhci->lock, flags); + virt_dev->current_mel = max_exit_latency; + spin_unlock_irqrestore(&xhci->lock, flags); + } + return ret; +} + +static int calculate_max_exit_latency(struct usb_device *udev, + enum usb3_link_state state_changed, + u16 hub_encoded_timeout) +{ + unsigned long long u1_mel_us = 0; + unsigned long long u2_mel_us = 0; + unsigned long long mel_us = 0; + bool disabling_u1; + bool disabling_u2; + bool enabling_u1; + bool enabling_u2; + + disabling_u1 = (state_changed == USB3_LPM_U1 && + hub_encoded_timeout == USB3_LPM_DISABLED); + disabling_u2 = (state_changed == USB3_LPM_U2 && + hub_encoded_timeout == USB3_LPM_DISABLED); + + enabling_u1 = (state_changed == USB3_LPM_U1 && + hub_encoded_timeout != USB3_LPM_DISABLED); + enabling_u2 = (state_changed == USB3_LPM_U2 && + hub_encoded_timeout != USB3_LPM_DISABLED); + + /* If U1 was already enabled and we're not disabling it, + * or we're going to enable U1, account for the U1 max exit latency. + */ + if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) || + enabling_u1) + u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000); + if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) || + enabling_u2) + u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000); + + if (u1_mel_us > u2_mel_us) + mel_us = u1_mel_us; + else + mel_us = u2_mel_us; + /* xHCI host controller max exit latency field is only 16 bits wide. */ + if (mel_us > MAX_EXIT) { + dev_warn(&udev->dev, "Link PM max exit latency of %lluus " + "is too big.\n", mel_us); + return -E2BIG; + } + return mel_us; +} + +/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ +int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + struct xhci_hcd *xhci; + u16 hub_encoded_timeout; + int mel; + int ret; + + xhci = hcd_to_xhci(hcd); + /* The LPM timeout values are pretty host-controller specific, so don't + * enable hub-initiated timeouts unless the vendor has provided + * information about their timeout algorithm. + */ + if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) || + !xhci->devs[udev->slot_id]) + return USB3_LPM_DISABLED; + + hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state); + mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout); + if (mel < 0) { + /* Max Exit Latency is too big, disable LPM. */ + hub_encoded_timeout = USB3_LPM_DISABLED; + mel = 0; + } + + ret = xhci_change_max_exit_latency(xhci, udev, mel); + if (ret) + return ret; + return hub_encoded_timeout; +} + +int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + struct xhci_hcd *xhci; + u16 mel; + int ret; + + xhci = hcd_to_xhci(hcd); + if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) || + !xhci->devs[udev->slot_id]) + return 0; + + mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED); + ret = xhci_change_max_exit_latency(xhci, udev, mel); + if (ret) + return ret; + return 0; +} +/*-------------------------------------------------------------------------*/ + int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ce1edd7246aa..de3d6e3e57be 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -362,8 +362,10 @@ struct xhci_op_regs { * Timeout can be up to 127us. 0xFF means an infinite timeout. */ #define PORT_U1_TIMEOUT(p) ((p) & 0xff) +#define PORT_U1_TIMEOUT_MASK 0xff /* Inactivity timer value for transitions into U2 */ #define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) +#define PORT_U2_TIMEOUT_MASK (0xff << 8) /* Bits 24:31 for port testing */ /* USB2 Protocol PORTSPMSC */ @@ -914,6 +916,8 @@ struct xhci_virt_device { u8 real_port; struct xhci_interval_bw_table *bw_table; struct xhci_tt_bw_info *tt_info; + /* The current max exit latency for the enabled USB3 link states. */ + u16 current_mel; }; /* @@ -1424,6 +1428,8 @@ struct xhci_hcd { /* slot enabling and address device helpers */ struct completion addr_dev; int slot_id; + /* For USB 3.0 LPM enable/disable. */ + struct xhci_command *lpm_command; /* Internal mirror of the HW's dcbaa */ struct xhci_virt_device *devs[MAX_HC_SLOTS]; /* For keeping track of bandwidth domains per roothub. */ @@ -1481,6 +1487,9 @@ struct xhci_hcd { #define XHCI_RESET_ON_RESUME (1 << 7) #define XHCI_SW_BW_CHECKING (1 << 8) #define XHCI_AMD_0x96_HOST (1 << 9) +#define XHCI_TRUST_TX_LENGTH (1 << 10) +#define XHCI_LPM_SUPPORT (1 << 11) +#define XHCI_INTEL_HOST (1 << 12) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1754,7 +1763,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id); + u32 slot_id, bool command_must_succeed); int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index); int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); @@ -1778,6 +1787,10 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 link_state); +int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state); +int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state); void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 port_bit); int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, diff --git a/include/linux/usb.h b/include/linux/usb.h index 14933451d21d..c19297a8779c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -378,6 +378,45 @@ enum usb_device_removable { USB_DEVICE_FIXED, }; +/* + * USB 3.0 Link Power Management (LPM) parameters. + * + * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit. + * MEL is the USB 3.0 Link PM latency for host-initiated LPM exit. + * All three are stored in nanoseconds. + */ +struct usb3_lpm_parameters { + /* + * Maximum exit latency (MEL) for the host to send a packet to the + * device (either a Ping for isoc endpoints, or a data packet for + * interrupt endpoints), the hubs to decode the packet, and for all hubs + * in the path to transition the links to U0. + */ + unsigned int mel; + /* + * Maximum exit latency for a device-initiated LPM transition to bring + * all links into U0. Abbreviated as "PEL" in section 9.4.12 of the USB + * 3.0 spec, with no explanation of what "P" stands for. "Path"? + */ + unsigned int pel; + + /* + * The System Exit Latency (SEL) includes PEL, and three other + * latencies. After a device initiates a U0 transition, it will take + * some time from when the device sends the ERDY to when it will finally + * receive the data packet. Basically, SEL should be the worse-case + * latency from when a device starts initiating a U0 transition to when + * it will get data. + */ + unsigned int sel; + /* + * The idle timeout value that is currently programmed into the parent + * hub for this device. When the timer counts to zero, the parent hub + * will initiate an LPM transition to either U1 or U2. + */ + int timeout; +}; + /** * struct usb_device - kernel's representation of a USB device * @devnum: device number; address on a USB bus @@ -435,6 +474,12 @@ enum usb_device_removable { * specific data for the device. * @slot_id: Slot ID assigned by xHCI * @removable: Device can be physically removed from this port + * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout. + * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout. + * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm() + * to keep track of the number of functions that require USB 3.0 Link Power + * Management to be disabled for this usb_device. This count should only + * be manipulated by those functions, with the bandwidth_mutex is held. * * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use @@ -481,6 +526,7 @@ struct usb_device { unsigned lpm_capable:1; unsigned usb2_hw_lpm_capable:1; unsigned usb2_hw_lpm_enabled:1; + unsigned usb3_lpm_enabled:1; int string_langid; /* static strings from the device */ @@ -507,6 +553,10 @@ struct usb_device { struct wusb_dev *wusb_dev; int slot_id; enum usb_device_removable removable; + struct usb3_lpm_parameters u1_params; + struct usb3_lpm_parameters u2_params; + unsigned lpm_disable_count; + unsigned hub_initiated_lpm_disable_count; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -542,6 +592,12 @@ extern void usb_autopm_put_interface_async(struct usb_interface *intf); extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf); extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); +extern int usb_disable_lpm(struct usb_device *udev); +extern void usb_enable_lpm(struct usb_device *udev); +/* Same as above, but these functions lock/unlock the bandwidth_mutex. */ +extern int usb_unlocked_disable_lpm(struct usb_device *udev); +extern void usb_unlocked_enable_lpm(struct usb_device *udev); + static inline void usb_mark_last_busy(struct usb_device *udev) { pm_runtime_mark_last_busy(&udev->dev); @@ -842,6 +898,9 @@ struct usbdrv_wrap { * for interfaces bound to this driver. * @soft_unbind: if set to 1, the USB core will not kill URBs and disable * endpoints before calling the driver's disconnect method. + * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs + * to initiate lower power link state transitions when an idle timeout + * occurs. Device-initiated USB 3.0 link PM will still be allowed. * * USB interface drivers must provide a name, probe() and disconnect() * methods, and an id_table. Other driver fields are optional. @@ -882,6 +941,7 @@ struct usb_driver { struct usbdrv_wrap drvwrap; unsigned int no_dynamic_id:1; unsigned int supports_autosuspend:1; + unsigned int disable_hub_initiated_lpm:1; unsigned int soft_unbind:1; }; #define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver) diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index f1d26b6067f1..b6c2863b2c94 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -76,6 +76,8 @@ #define USB_PORT_FEAT_C_BH_PORT_RESET 29 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 +#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) + /* USB 3.0 hub remote wake mask bits, see table 10-14 */ #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index e785d85b617f..d1d732c2838d 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -392,6 +392,11 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 +/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ +#define USB_ENDPOINT_INTRTYPE 0x30 +#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) +#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) + #define USB_ENDPOINT_SYNCTYPE 0x0c #define USB_ENDPOINT_SYNC_NONE (0 << 2) #define USB_ENDPOINT_SYNC_ASYNC (1 << 2) @@ -594,6 +599,12 @@ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) return __le16_to_cpu(epd->wMaxPacketSize); } +static inline int usb_endpoint_interrupt_type( + const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; +} + /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ @@ -935,6 +946,51 @@ enum usb_device_state { */ }; +enum usb3_link_state { + USB3_LPM_U0 = 0, + USB3_LPM_U1, + USB3_LPM_U2, + USB3_LPM_U3 +}; + +/* + * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. + * 0xff means the parent hub will accept transitions to U1, but will not + * initiate a transition. + * + * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to + * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved + * values. + * + * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. + * 0xff means the parent hub will accept transitions to U2, but will not + * initiate a transition. + * + * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to + * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 + * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means + * 65.024ms. + */ +#define USB3_LPM_DISABLED 0x0 +#define USB3_LPM_U1_MAX_TIMEOUT 0x7F +#define USB3_LPM_U2_MAX_TIMEOUT 0xFE +#define USB3_LPM_DEVICE_INITIATED 0xFF + +struct usb_set_sel_req { + __u8 u1_sel; + __u8 u1_pel; + __le16 u2_sel; + __le16 u2_pel; +} __attribute__ ((packed)); + +/* + * The Set System Exit Latency control transfer provides one byte each for + * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each + * are two bytes long. + */ +#define USB3_LPM_MAX_U1_SEL_PEL 0xFF +#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF + /*-------------------------------------------------------------------------*/ /* diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index bbb946437070..7f855d50cdf5 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -344,6 +344,15 @@ struct hc_driver { */ int (*update_device)(struct usb_hcd *, struct usb_device *); int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); + /* USB 3.0 Link Power Management */ + /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ + int (*enable_usb3_lpm_timeout)(struct usb_hcd *, + struct usb_device *, enum usb3_link_state state); + /* The xHCI host controller can still fail the command to + * disable the LPM timeouts, so this can return an error code. + */ + int (*disable_usb3_lpm_timeout)(struct usb_hcd *, + struct usb_device *, enum usb3_link_state state); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); |