diff options
-rw-r--r-- | drivers/tty/n_gsm.c | 154 |
1 files changed, 81 insertions, 73 deletions
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 5256087dd81b..11a25fa7d76b 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -19,7 +19,7 @@ * * TO DO: * Mostly done: ioctls for setting modes/timing - * Partly done: hooks so you can pull off frames to non tty devs + * Partly done: hooks so you can pull off frames to non tty devs * Restart DLCI 0 when it closes ? * Test basic encoding * Improve the tx engine @@ -73,8 +73,10 @@ module_param(debug, int, 0600); #define T2 (2 * HZ) #endif -/* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte - limits so this is plenty */ +/* + * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte + * limits so this is plenty + */ #define MAX_MRU 512 #define MAX_MTU 512 @@ -290,7 +292,7 @@ static spinlock_t gsm_mux_lock; #define MDM_DV 0x40 #define GSM0_SOF 0xF9 -#define GSM1_SOF 0x7E +#define GSM1_SOF 0x7E #define GSM1_ESCAPE 0x7D #define GSM1_ESCAPE_BITS 0x20 #define XON 0x11 @@ -433,61 +435,63 @@ static void gsm_print_packet(const char *hdr, int addr, int cr, if (!(debug & 1)) return; - printk(KERN_INFO "%s %d) %c: ", hdr, addr, "RC"[cr]); + pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]); switch (control & ~PF) { case SABM: - printk(KERN_CONT "SABM"); + pr_cont("SABM"); break; case UA: - printk(KERN_CONT "UA"); + pr_cont("UA"); break; case DISC: - printk(KERN_CONT "DISC"); + pr_cont("DISC"); break; case DM: - printk(KERN_CONT "DM"); + pr_cont("DM"); break; case UI: - printk(KERN_CONT "UI"); + pr_cont("UI"); break; case UIH: - printk(KERN_CONT "UIH"); + pr_cont("UIH"); break; default: if (!(control & 0x01)) { - printk(KERN_CONT "I N(S)%d N(R)%d", - (control & 0x0E) >> 1, (control & 0xE)>> 5); + pr_cont("I N(S)%d N(R)%d", + (control & 0x0E) >> 1, (control & 0xE) >> 5); } else switch (control & 0x0F) { - case RR: - printk("RR(%d)", (control & 0xE0) >> 5); - break; - case RNR: - printk("RNR(%d)", (control & 0xE0) >> 5); - break; - case REJ: - printk("REJ(%d)", (control & 0xE0) >> 5); - break; - default: - printk(KERN_CONT "[%02X]", control); + case RR: + pr_cont("RR(%d)", (control & 0xE0) >> 5); + break; + case RNR: + pr_cont("RNR(%d)", (control & 0xE0) >> 5); + break; + case REJ: + pr_cont("REJ(%d)", (control & 0xE0) >> 5); + break; + default: + pr_cont("[%02X]", control); } } if (control & PF) - printk(KERN_CONT "(P)"); + pr_cont("(P)"); else - printk(KERN_CONT "(F)"); + pr_cont("(F)"); if (dlen) { int ct = 0; while (dlen--) { - if (ct % 8 == 0) - printk(KERN_CONT "\n "); - printk(KERN_CONT "%02X ", *data++); + if (ct % 8 == 0) { + pr_cont("\n"); + pr_debug(" "); + } + pr_cont("%02X ", *data++); ct++; } } - printk(KERN_CONT "\n"); + pr_cont("\n"); } @@ -526,11 +530,13 @@ static void hex_packet(const unsigned char *p, int len) { int i; for (i = 0; i < len; i++) { - if (i && (i % 16) == 0) - printk("\n"); - printk("%02X ", *p++); + if (i && (i % 16) == 0) { + pr_cont("\n"); + pr_debug(""); + } + pr_cont("%02X ", *p++); } - printk("\n"); + pr_cont("\n"); } /** @@ -680,7 +686,7 @@ static void gsm_data_kick(struct gsm_mux *gsm) } if (debug & 4) { - printk("gsm_data_kick: \n"); + pr_debug("gsm_data_kick:\n"); hex_packet(gsm->txframe, len); } @@ -1233,7 +1239,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, } /** - * gsm_control_transmit - send control packet + * gsm_control_transmit - send control packet * @gsm: gsm mux * @ctrl: frame to send * @@ -1363,7 +1369,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci) { del_timer(&dlci->t1); if (debug & 8) - printk("DLCI %d goes closed.\n", dlci->addr); + pr_debug("DLCI %d goes closed.\n", dlci->addr); dlci->state = DLCI_CLOSED; if (dlci->addr != 0) { struct tty_struct *tty = tty_port_tty_get(&dlci->port); @@ -1394,7 +1400,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci) /* This will let a tty open continue */ dlci->state = DLCI_OPEN; if (debug & 8) - printk("DLCI %d goes open.\n", dlci->addr); + pr_debug("DLCI %d goes open.\n", dlci->addr); wake_up(&dlci->gsm->event); } @@ -1496,29 +1502,29 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) unsigned int modem = 0; if (debug & 16) - printk("%d bytes for tty %p\n", len, tty); + pr_debug("%d bytes for tty %p\n", len, tty); if (tty) { switch (dlci->adaption) { - /* Unsupported types */ - /* Packetised interruptible data */ - case 4: - break; - /* Packetised uininterruptible voice/data */ - case 3: - break; - /* Asynchronous serial with line state in each frame */ - case 2: - while (gsm_read_ea(&modem, *data++) == 0) { - len--; - if (len == 0) - return; - } - gsm_process_modem(tty, dlci, modem); - /* Line state will go via DLCI 0 controls only */ - case 1: - default: - tty_insert_flip_string(tty, data, len); - tty_flip_buffer_push(tty); + /* Unsupported types */ + /* Packetised interruptible data */ + case 4: + break; + /* Packetised uininterruptible voice/data */ + case 3: + break; + /* Asynchronous serial with line state in each frame */ + case 2: + while (gsm_read_ea(&modem, *data++) == 0) { + len--; + if (len == 0) + return; + } + gsm_process_modem(tty, dlci, modem); + /* Line state will go via DLCI 0 controls only */ + case 1: + default: + tty_insert_flip_string(tty, data, len); + tty_flip_buffer_push(tty); } tty_kref_put(tty); } @@ -1656,7 +1662,7 @@ static void gsm_queue(struct gsm_mux *gsm) if (gsm->fcs != GOOD_FCS) { gsm->bad_fcs++; if (debug & 4) - printk("BAD FCS %02x\n", gsm->fcs); + pr_debug("BAD FCS %02x\n", gsm->fcs); return; } address = gsm->address >> 1; @@ -1890,7 +1896,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c) gsm->state = GSM_DATA; break; case GSM_DATA: /* Data */ - if (gsm->count > gsm->mru ) { /* Allow one for the FCS */ + if (gsm->count > gsm->mru) { /* Allow one for the FCS */ gsm->state = GSM_OVERRUN; gsm->bad_size++; } else @@ -2085,7 +2091,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len) return -ENOSPC; } if (debug & 4) { - printk("-->%d bytes out\n", len); + pr_debug("-->%d bytes out\n", len); hex_packet(data, len); } gsm->tty->ops->write(gsm->tty, data, len); @@ -2142,7 +2148,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, char flags; if (debug & 4) { - printk("Inbytes %dd\n", count); + pr_debug("Inbytes %dd\n", count); hex_packet(cp, count); } @@ -2159,7 +2165,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, gsm->error(gsm, *dp, flags); break; default: - printk(KERN_ERR "%s: unknown flag %d\n", + WARN_ONCE("%s: unknown flag %d\n", tty_name(tty, buf), flags); break; } @@ -2354,7 +2360,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, int need_restart = 0; /* Stuff we don't support yet - UI or I frame transport, windowing */ - if ((c->adaption !=1 && c->adaption != 2) || c->k) + if ((c->adaption != 1 && c->adaption != 2) || c->k) return -EOPNOTSUPP; /* Check the MRU/MTU range looks sane */ if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8) @@ -2448,7 +2454,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file, c.i = 1; else c.i = 2; - printk("Ftype %d i %d\n", gsm->ftype, c.i); + pr_debug("Ftype %d i %d\n", gsm->ftype, c.i); c.mru = gsm->mru; c.mtu = gsm->mtu; c.k = 0; @@ -2742,14 +2748,15 @@ static int __init gsm_init(void) /* Fill in our line protocol discipline, and register it */ int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet); if (status != 0) { - printk(KERN_ERR "n_gsm: can't register line discipline (err = %d)\n", status); + pr_err("n_gsm: can't register line discipline (err = %d)\n", + status); return status; } gsm_tty_driver = alloc_tty_driver(256); if (!gsm_tty_driver) { tty_unregister_ldisc(N_GSM0710); - printk(KERN_ERR "gsm_init: tty allocation failed.\n"); + pr_err("gsm_init: tty allocation failed.\n"); return -EINVAL; } gsm_tty_driver->owner = THIS_MODULE; @@ -2760,7 +2767,7 @@ static int __init gsm_init(void) gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL; gsm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV - | TTY_DRIVER_HARDWARE_BREAK; + | TTY_DRIVER_HARDWARE_BREAK; gsm_tty_driver->init_termios = tty_std_termios; /* Fixme */ gsm_tty_driver->init_termios.c_lflag &= ~ECHO; @@ -2771,10 +2778,11 @@ static int __init gsm_init(void) if (tty_register_driver(gsm_tty_driver)) { put_tty_driver(gsm_tty_driver); tty_unregister_ldisc(N_GSM0710); - printk(KERN_ERR "gsm_init: tty registration failed.\n"); + pr_err("gsm_init: tty registration failed.\n"); return -EBUSY; } - printk(KERN_INFO "gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start); + pr_debug("gsm_init: loaded as %d,%d.\n", + gsm_tty_driver->major, gsm_tty_driver->minor_start); return 0; } @@ -2782,10 +2790,10 @@ static void __exit gsm_exit(void) { int status = tty_unregister_ldisc(N_GSM0710); if (status != 0) - printk(KERN_ERR "n_gsm: can't unregister line discipline (err = %d)\n", status); + pr_err("n_gsm: can't unregister line discipline (err = %d)\n", + status); tty_unregister_driver(gsm_tty_driver); put_tty_driver(gsm_tty_driver); - printk(KERN_INFO "gsm_init: unloaded.\n"); } module_init(gsm_init); |