diff options
76 files changed, 6641 insertions, 1673 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt new file mode 100644 index 000000000000..898f030eba62 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt @@ -0,0 +1,39 @@ +I2C bus that tunnels through the ChromeOS EC (cros-ec) +====================================================== +On some ChromeOS board designs we've got a connection to the EC (embedded +controller) but no direct connection to some devices on the other side of +the EC (like a battery and PMIC). To get access to those devices we need +to tunnel our i2c commands through the EC. + +The node for this device should be under a cros-ec node like google,cros-ec-spi +or google,cros-ec-i2c. + + +Required properties: +- compatible: google,cros-ec-i2c-tunnel +- google,remote-bus: The EC bus we'd like to talk to. + +Optional child nodes: +- One node per I2C device connected to the tunnelled I2C bus. + + +Example: + cros-ec@0 { + compatible = "google,cros-ec-spi"; + + ... + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + }; + } diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt new file mode 100644 index 000000000000..1f5a31fef907 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -0,0 +1,59 @@ +* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device + +PRCM is an MFD device exposing several Power Management related devices +(like clks and reset controllers). + +Required properties: + - compatible: "allwinner,sun6i-a31-prcm" + - reg: The PRCM registers range + +The prcm node may contain several subdevices definitions: + - see Documentation/devicetree/clk/sunxi.txt for clock devices + - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset + controller devices + + +Example: + + prcm: prcm@01f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + /* Put subdevices here */ + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100_div>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer01", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt new file mode 100644 index 000000000000..20963c76b4bc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -0,0 +1,19 @@ +* Device tree bindings for Texas Instruments keystone device state control + +The Keystone II devices have a set of registers that are used to control +the status of its peripherals. This node is intended to allow access to +this functionality. + +Required properties: + +- compatible: "ti,keystone-devctrl", "syscon" + +- reg: contains offset/length value for device state control + registers space. + +Example: + +devctrl: device-state-control@0x02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index 0f5dd709d752..a41157b5d930 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -19,6 +19,8 @@ Required properties: Optional properties, nodes: - enable-active-high: To power on the twl6040 during boot. +- clocks: phandle to the clk32k clock provider +- clock-names: Must be "clk32k" Vibra functionality Required properties: diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index 2776a09bee58..628b58494294 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -23,7 +23,8 @@ enum { REG_RE, REG_FE, REG_IE }; #define CACHE_NR_REGS 3 -#define CACHE_NR_BANKS (STMPE_NR_GPIOS / 8) +/* No variant has more than 24 GPIOs */ +#define CACHE_NR_BANKS (24 / 8) struct stmpe_gpio { struct gpio_chip chip; @@ -31,8 +32,6 @@ struct stmpe_gpio { struct device *dev; struct mutex irq_lock; struct irq_domain *domain; - - int irq_base; unsigned norequest_mask; /* Caches of interrupt control registers for bus_lock */ @@ -311,13 +310,8 @@ static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = { static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio, struct device_node *np) { - int base = 0; - - if (!np) - base = stmpe_gpio->irq_base; - stmpe_gpio->domain = irq_domain_add_simple(np, - stmpe_gpio->chip.ngpio, base, + stmpe_gpio->chip.ngpio, 0, &stmpe_gpio_irq_simple_ops, stmpe_gpio); if (!stmpe_gpio->domain) { dev_err(stmpe_gpio->dev, "failed to create irqdomain\n"); @@ -354,7 +348,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev) #ifdef CONFIG_OF stmpe_gpio->chip.of_node = np; #endif - stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1; + stmpe_gpio->chip.base = -1; if (pdata) stmpe_gpio->norequest_mask = pdata->norequest_mask; @@ -362,9 +356,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev) of_property_read_u32(np, "st,norequest-mask", &stmpe_gpio->norequest_mask); - if (irq >= 0) - stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); - else + if (irq < 0) dev_info(&pdev->dev, "device configured in no-irq mode; " "irqs are not available\n"); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c94db1c5e353..9a0a6cc7f4ba 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -993,6 +993,15 @@ config I2C_SIBYTE help Supports the SiByte SOC on-chip I2C interfaces (2 channels). +config I2C_CROS_EC_TUNNEL + tristate "ChromeOS EC tunnel I2C bus" + depends on MFD_CROS_EC + help + If you say yes here you get an I2C bus that will tunnel i2c commands + through to the other side of the ChromeOS EC to the i2c bus + connected there. This will work whatever the interface used to + talk to the EC (SPI, I2C or LPC). + config SCx200_I2C tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" depends on SCx200_GPIO diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 18d18ff9db93..e110ca932918 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o # Other I2C/SMBus bus drivers obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o +obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c new file mode 100644 index 000000000000..8e7a71487bb1 --- /dev/null +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -0,0 +1,318 @@ +/* + * Copyright (C) 2013 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Expose an I2C passthrough to the ChromeOS EC. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/** + * struct ec_i2c_device - Driver data for I2C tunnel + * + * @dev: Device node + * @adap: I2C adapter + * @ec: Pointer to EC device + * @remote_bus: The EC bus number we tunnel to on the other side. + * @request_buf: Buffer for transmitting data; we expect most transfers to fit. + * @response_buf: Buffer for receiving data; we expect most transfers to fit. + */ + +struct ec_i2c_device { + struct device *dev; + struct i2c_adapter adap; + struct cros_ec_device *ec; + + u16 remote_bus; + + u8 request_buf[256]; + u8 response_buf[256]; +}; + +/** + * ec_i2c_count_message - Count bytes needed for ec_i2c_construct_message + * + * @i2c_msgs: The i2c messages to read + * @num: The number of i2c messages. + * + * Returns the number of bytes the messages will take up. + */ +static int ec_i2c_count_message(const struct i2c_msg i2c_msgs[], int num) +{ + int i; + int size; + + size = sizeof(struct ec_params_i2c_passthru); + size += num * sizeof(struct ec_params_i2c_passthru_msg); + for (i = 0; i < num; i++) + if (!(i2c_msgs[i].flags & I2C_M_RD)) + size += i2c_msgs[i].len; + + return size; +} + +/** + * ec_i2c_construct_message - construct a message to go to the EC + * + * This function effectively stuffs the standard i2c_msg format of Linux into + * a format that the EC understands. + * + * @buf: The buffer to fill. We assume that the buffer is big enough. + * @i2c_msgs: The i2c messages to read. + * @num: The number of i2c messages. + * @bus_num: The remote bus number we want to talk to. + * + * Returns 0 or a negative error number. + */ +static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[], + int num, u16 bus_num) +{ + struct ec_params_i2c_passthru *params; + u8 *out_data; + int i; + + out_data = buf + sizeof(struct ec_params_i2c_passthru) + + num * sizeof(struct ec_params_i2c_passthru_msg); + + params = (struct ec_params_i2c_passthru *)buf; + params->port = bus_num; + params->num_msgs = num; + for (i = 0; i < num; i++) { + const struct i2c_msg *i2c_msg = &i2c_msgs[i]; + struct ec_params_i2c_passthru_msg *msg = ¶ms->msg[i]; + + msg->len = i2c_msg->len; + msg->addr_flags = i2c_msg->addr; + + if (i2c_msg->flags & I2C_M_TEN) + msg->addr_flags |= EC_I2C_FLAG_10BIT; + + if (i2c_msg->flags & I2C_M_RD) { + msg->addr_flags |= EC_I2C_FLAG_READ; + } else { + memcpy(out_data, i2c_msg->buf, msg->len); + out_data += msg->len; + } + } + + return 0; +} + +/** + * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response + * + * @i2c_msgs: The i2c messages to to fill up. + * @num: The number of i2c messages expected. + * + * Returns the number of response bytes expeced. + */ +static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num) +{ + int size; + int i; + + size = sizeof(struct ec_response_i2c_passthru); + for (i = 0; i < num; i++) + if (i2c_msgs[i].flags & I2C_M_RD) + size += i2c_msgs[i].len; + + return size; +} + +/** + * ec_i2c_parse_response - Parse a response from the EC + * + * We'll take the EC's response and copy it back into msgs. + * + * @buf: The buffer to parse. + * @i2c_msgs: The i2c messages to to fill up. + * @num: The number of i2c messages; will be modified to include the actual + * number received. + * + * Returns 0 or a negative error number. + */ +static int ec_i2c_parse_response(const u8 *buf, struct i2c_msg i2c_msgs[], + int *num) +{ + const struct ec_response_i2c_passthru *resp; + const u8 *in_data; + int i; + + in_data = buf + sizeof(struct ec_response_i2c_passthru); + + resp = (const struct ec_response_i2c_passthru *)buf; + if (resp->i2c_status & EC_I2C_STATUS_TIMEOUT) + return -ETIMEDOUT; + else if (resp->i2c_status & EC_I2C_STATUS_ERROR) + return -EREMOTEIO; + + /* Other side could send us back fewer messages, but not more */ + if (resp->num_msgs > *num) + return -EPROTO; + *num = resp->num_msgs; + + for (i = 0; i < *num; i++) { + struct i2c_msg *i2c_msg = &i2c_msgs[i]; + + if (i2c_msgs[i].flags & I2C_M_RD) { + memcpy(i2c_msg->buf, in_data, i2c_msg->len); + in_data += i2c_msg->len; + } + } + + return 0; +} + +static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[], + int num) +{ + struct ec_i2c_device *bus = adap->algo_data; + struct device *dev = bus->dev; + const u16 bus_num = bus->remote_bus; + int request_len; + int response_len; + u8 *request = NULL; + u8 *response = NULL; + int result; + + request_len = ec_i2c_count_message(i2c_msgs, num); + if (request_len < 0) { + dev_warn(dev, "Error constructing message %d\n", request_len); + result = request_len; + goto exit; + } + response_len = ec_i2c_count_response(i2c_msgs, num); + if (response_len < 0) { + /* Unexpected; no errors should come when NULL response */ + dev_warn(dev, "Error preparing response %d\n", response_len); + result = response_len; + goto exit; + } + + if (request_len <= ARRAY_SIZE(bus->request_buf)) { + request = bus->request_buf; + } else { + request = kzalloc(request_len, GFP_KERNEL); + if (request == NULL) { + result = -ENOMEM; + goto exit; + } + } + if (response_len <= ARRAY_SIZE(bus->response_buf)) { + response = bus->response_buf; + } else { + response = kzalloc(response_len, GFP_KERNEL); + if (response == NULL) { + result = -ENOMEM; + goto exit; + } + } + + ec_i2c_construct_message(request, i2c_msgs, num, bus_num); + result = bus->ec->command_sendrecv(bus->ec, EC_CMD_I2C_PASSTHRU, + request, request_len, + response, response_len); + if (result) + goto exit; + + result = ec_i2c_parse_response(response, i2c_msgs, &num); + if (result < 0) + goto exit; + + /* Indicate success by saying how many messages were sent */ + result = num; +exit: + if (request != bus->request_buf) + kfree(request); + if (response != bus->response_buf) + kfree(response); + + return result; +} + +static u32 ec_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm ec_i2c_algorithm = { + .master_xfer = ec_i2c_xfer, + .functionality = ec_i2c_functionality, +}; + +static int ec_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct ec_i2c_device *bus = NULL; + u32 remote_bus; + int err; + + if (!ec->command_sendrecv) { + dev_err(dev, "Missing sendrecv\n"); + return -EINVAL; + } + + bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL); + if (bus == NULL) + return -ENOMEM; + + err = of_property_read_u32(np, "google,remote-bus", &remote_bus); + if (err) { + dev_err(dev, "Couldn't read remote-bus property\n"); + return err; + } + bus->remote_bus = remote_bus; + + bus->ec = ec; + bus->dev = dev; + + bus->adap.owner = THIS_MODULE; + strlcpy(bus->adap.name, "cros-ec-i2c-tunnel", sizeof(bus->adap.name)); + bus->adap.algo = &ec_i2c_algorithm; + bus->adap.algo_data = bus; + bus->adap.dev.parent = &pdev->dev; + bus->adap.dev.of_node = np; + + err = i2c_add_adapter(&bus->adap); + if (err) { + dev_err(dev, "cannot register i2c adapter\n"); + return err; + } + platform_set_drvdata(pdev, bus); + + return err; +} + +static int ec_i2c_remove(struct platform_device *dev) +{ + struct ec_i2c_device *bus = platform_get_drvdata(dev); + + i2c_del_adapter(&bus->adap); + + return 0; +} + +static struct platform_driver ec_i2c_tunnel_driver = { + .probe = ec_i2c_probe, + .remove = ec_i2c_remove, + .driver = { + .name = "cros-ec-i2c-tunnel", + }, +}; + +module_platform_driver(ec_i2c_tunnel_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("EC I2C tunnel driver"); +MODULE_ALIAS("platform:cros-ec-i2c-tunnel"); diff --git a/drivers/memstick/host/Kconfig b/drivers/memstick/host/Kconfig index 1b37cf8cd204..7310e32b5991 100644 --- a/drivers/memstick/host/Kconfig +++ b/drivers/memstick/host/Kconfig @@ -52,3 +52,13 @@ config MEMSTICK_REALTEK_PCI To compile this driver as a module, choose M here: the module will be called rtsx_pci_ms. + +config MEMSTICK_REALTEK_USB + tristate "Realtek USB Memstick Card Interface Driver" + depends on MFD_RTSX_USB + help + Say Y here to include driver code to support Memstick card interface + of Realtek RTS5129/39 series USB card reader + + To compile this driver as a module, choose M here: the module will + be called rts5139_ms. diff --git a/drivers/memstick/host/Makefile b/drivers/memstick/host/Makefile index af3459d7686e..491c9557441d 100644 --- a/drivers/memstick/host/Makefile +++ b/drivers/memstick/host/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o obj-$(CONFIG_MEMSTICK_R592) += r592.o obj-$(CONFIG_MEMSTICK_REALTEK_PCI) += rtsx_pci_ms.o +obj-$(CONFIG_MEMSTICK_REALTEK_USB) += rtsx_usb_ms.o diff --git a/drivers/memstick/host/rtsx_usb_ms.c b/drivers/memstick/host/rtsx_usb_ms.c new file mode 100644 index 000000000000..a7282b7d4de8 --- /dev/null +++ b/drivers/memstick/host/rtsx_usb_ms.c @@ -0,0 +1,839 @@ +/* Realtek USB Memstick Card Interface driver + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Roger Tseng <rogerable@realtek.com> + */ + +#include <linux/module.h> +#include <linux/highmem.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/memstick.h> +#include <linux/kthread.h> +#include <linux/mfd/rtsx_usb.h> +#include <linux/pm_runtime.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/completion.h> +#include <asm/unaligned.h> + +struct rtsx_usb_ms { + struct platform_device *pdev; + struct rtsx_ucr *ucr; + struct memstick_host *msh; + struct memstick_request *req; + + struct mutex host_mutex; + struct work_struct handle_req; + + struct task_struct *detect_ms; + struct completion detect_ms_exit; + + u8 ssc_depth; + unsigned int clock; + int power_mode; + unsigned char ifmode; + bool eject; +}; + +static inline struct device *ms_dev(struct rtsx_usb_ms *host) +{ + return &(host->pdev->dev); +} + +static inline void ms_clear_error(struct rtsx_usb_ms *host) +{ + struct rtsx_ucr *ucr = host->ucr; + rtsx_usb_ep0_write_register(ucr, CARD_STOP, + MS_STOP | MS_CLR_ERR, + MS_STOP | MS_CLR_ERR); + + rtsx_usb_clear_dma_err(ucr); + rtsx_usb_clear_fsm_err(ucr); +} + +#ifdef DEBUG + +static void ms_print_debug_regs(struct rtsx_usb_ms *host) +{ + struct rtsx_ucr *ucr = host->ucr; + u16 i; + u8 *ptr; + + /* Print MS host internal registers */ + rtsx_usb_init_cmd(ucr); + + /* MS_CFG to MS_INT_REG */ + for (i = 0xFD40; i <= 0xFD44; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0); + + /* CARD_SHARE_MODE to CARD_GPIO */ + for (i = 0xFD51; i <= 0xFD56; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0); + + /* CARD_PULL_CTLx */ + for (i = 0xFD60; i <= 0xFD65; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0); + + /* CARD_DATA_SOURCE, CARD_SELECT, CARD_CLK_EN, CARD_PWR_CTL */ + rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_DATA_SOURCE, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_SELECT, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_CLK_EN, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_PWR_CTL, 0, 0); + + rtsx_usb_send_cmd(ucr, MODE_CR, 100); + rtsx_usb_get_rsp(ucr, 21, 100); + + ptr = ucr->rsp_buf; + for (i = 0xFD40; i <= 0xFD44; i++) + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++)); + for (i = 0xFD51; i <= 0xFD56; i++) + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++)); + for (i = 0xFD60; i <= 0xFD65; i++) + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++)); + + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_DATA_SOURCE, *(ptr++)); + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_SELECT, *(ptr++)); + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_CLK_EN, *(ptr++)); + dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_PWR_CTL, *(ptr++)); +} + +#else + +static void ms_print_debug_regs(struct rtsx_usb_ms *host) +{ +} + +#endif + +static int ms_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int ms_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int ms_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int ms_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int ms_power_on(struct rtsx_usb_ms *host) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(ms_dev(host), "%s\n", __func__); + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, MS_MOD_SEL); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE, + CARD_SHARE_MASK, CARD_SHARE_MS); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, + MS_CLK_EN, MS_CLK_EN); + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err < 0) + return err; + + if (CHECK_PKG(ucr, LQFP48)) + err = ms_pull_ctl_enable_lqfp48(ucr); + else + err = ms_pull_ctl_enable_qfn24(ucr); + if (err < 0) + return err; + + err = rtsx_usb_write_register(ucr, CARD_PWR_CTL, + POWER_MASK, PARTIAL_POWER_ON); + if (err) + return err; + + usleep_range(800, 1000); + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK, POWER_ON); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, + MS_OUTPUT_EN, MS_OUTPUT_EN); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int ms_power_off(struct rtsx_usb_ms *host) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(ms_dev(host), "%s\n", __func__); + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, MS_CLK_EN, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, MS_OUTPUT_EN, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err < 0) + return err; + + if (CHECK_PKG(ucr, LQFP48)) + return ms_pull_ctl_disable_lqfp48(ucr); + + return ms_pull_ctl_disable_qfn24(ucr); +} + +static int ms_transfer_data(struct rtsx_usb_ms *host, unsigned char data_dir, + u8 tpc, u8 cfg, struct scatterlist *sg) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + unsigned int length = sg->length; + u16 sec_cnt = (u16)(length / 512); + u8 trans_mode, dma_dir, flag; + unsigned int pipe; + struct memstick_dev *card = host->msh->card; + + dev_dbg(ms_dev(host), "%s: tpc = 0x%02x, data_dir = %s, length = %d\n", + __func__, tpc, (data_dir == READ) ? "READ" : "WRITE", + length); + + if (data_dir == READ) { + flag = MODE_CDIR; + dma_dir = DMA_DIR_FROM_CARD; + if (card->id.type != MEMSTICK_TYPE_PRO) + trans_mode = MS_TM_NORMAL_READ; + else + trans_mode = MS_TM_AUTO_READ; + pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN); + } else { + flag = MODE_CDOR; + dma_dir = DMA_DIR_TO_CARD; + if (card->id.type != MEMSTICK_TYPE_PRO) + trans_mode = MS_TM_NORMAL_WRITE; + else + trans_mode = MS_TM_AUTO_WRITE; + pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT); + } + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc); + if (card->id.type == MEMSTICK_TYPE_PRO) { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_SECTOR_CNT_H, + 0xFF, (u8)(sec_cnt >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_SECTOR_CNT_L, + 0xFF, (u8)sec_cnt); + } + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3, + 0xFF, (u8)(length >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2, + 0xFF, (u8)(length >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1, + 0xFF, (u8)(length >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0, 0xFF, + (u8)length); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL, + 0x03 | DMA_PACK_SIZE_MASK, dma_dir | DMA_EN | DMA_512); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, RING_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER, + 0xFF, MS_TRANSFER_START | trans_mode); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER, + MS_TRANSFER_END, MS_TRANSFER_END); + + err = rtsx_usb_send_cmd(ucr, flag | STAGE_MS_STATUS, 100); + if (err) + return err; + + err = rtsx_usb_transfer_data(ucr, pipe, sg, length, + 1, NULL, 10000); + if (err) + goto err_out; + + err = rtsx_usb_get_rsp(ucr, 3, 15000); + if (err) + goto err_out; + + if (ucr->rsp_buf[0] & MS_TRANSFER_ERR || + ucr->rsp_buf[1] & (MS_CRC16_ERR | MS_RDY_TIMEOUT)) { + err = -EIO; + goto err_out; + } + return 0; +err_out: + ms_clear_error(host); + return err; +} + +static int ms_write_bytes(struct rtsx_usb_ms *host, u8 tpc, + u8 cfg, u8 cnt, u8 *data, u8 *int_reg) +{ + struct rtsx_ucr *ucr = host->ucr; + int err, i; + + dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc); + + rtsx_usb_init_cmd(ucr); + + for (i = 0; i < cnt; i++) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + PPBUF_BASE2 + i, 0xFF, data[i]); + + if (cnt % 2) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + PPBUF_BASE2 + i, 0xFF, 0xFF); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, PINGPONG_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER, + 0xFF, MS_TRANSFER_START | MS_TM_WRITE_BYTES); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER, + MS_TRANSFER_END, MS_TRANSFER_END); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, MS_TRANS_CFG, 0, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_CR, 100); + if (err) + return err; + + err = rtsx_usb_get_rsp(ucr, 2, 5000); + if (err || (ucr->rsp_buf[0] & MS_TRANSFER_ERR)) { + u8 val; + + rtsx_usb_ep0_read_register(ucr, MS_TRANS_CFG, &val); + dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val); + + if (int_reg) + *int_reg = val & 0x0F; + + ms_print_debug_regs(host); + + ms_clear_error(host); + + if (!(tpc & 0x08)) { + if (val & MS_CRC16_ERR) + return -EIO; + } else { + if (!(val & 0x80)) { + if (val & (MS_INT_ERR | MS_INT_CMDNK)) + return -EIO; + } + } + + return -ETIMEDOUT; + } + + if (int_reg) + *int_reg = ucr->rsp_buf[1] & 0x0F; + + return 0; +} + +static int ms_read_bytes(struct rtsx_usb_ms *host, u8 tpc, + u8 cfg, u8 cnt, u8 *data, u8 *int_reg) +{ + struct rtsx_ucr *ucr = host->ucr; + int err, i; + u8 *ptr; + + dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc); + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, PINGPONG_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER, + 0xFF, MS_TRANSFER_START | MS_TM_READ_BYTES); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER, + MS_TRANSFER_END, MS_TRANSFER_END); + for (i = 0; i < cnt - 1; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, PPBUF_BASE2 + i, 0, 0); + if (cnt % 2) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, PPBUF_BASE2 + cnt, 0, 0); + else + rtsx_usb_add_cmd(ucr, READ_REG_CMD, + PPBUF_BASE2 + cnt - 1, 0, 0); + + rtsx_usb_add_cmd(ucr, READ_REG_CMD, MS_TRANS_CFG, 0, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_CR, 100); + if (err) + return err; + + err = rtsx_usb_get_rsp(ucr, cnt + 2, 5000); + if (err || (ucr->rsp_buf[0] & MS_TRANSFER_ERR)) { + u8 val; + + rtsx_usb_ep0_read_register(ucr, MS_TRANS_CFG, &val); + dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val); + + if (int_reg && (host->ifmode != MEMSTICK_SERIAL)) + *int_reg = val & 0x0F; + + ms_print_debug_regs(host); + + ms_clear_error(host); + + if (!(tpc & 0x08)) { + if (val & MS_CRC16_ERR) + return -EIO; + } else { + if (!(val & 0x80)) { + if (val & (MS_INT_ERR | MS_INT_CMDNK)) + return -EIO; + } + } + + return -ETIMEDOUT; + } + + ptr = ucr->rsp_buf + 1; + for (i = 0; i < cnt; i++) + data[i] = *ptr++; + + + if (int_reg && (host->ifmode != MEMSTICK_SERIAL)) + *int_reg = *ptr & 0x0F; + + return 0; +} + +static int rtsx_usb_ms_issue_cmd(struct rtsx_usb_ms *host) +{ + struct memstick_request *req = host->req; + int err = 0; + u8 cfg = 0, int_reg; + + dev_dbg(ms_dev(host), "%s\n", __func__); + + if (req->need_card_int) { + if (host->ifmode != MEMSTICK_SERIAL) + cfg = WAIT_INT; + } + + if (req->long_data) { + err = ms_transfer_data(host, req->data_dir, + req->tpc, cfg, &(req->sg)); + } else { + if (req->data_dir == READ) + err = ms_read_bytes(host, req->tpc, cfg, + req->data_len, req->data, &int_reg); + else + err = ms_write_bytes(host, req->tpc, cfg, + req->data_len, req->data, &int_reg); + } + if (err < 0) + return err; + + if (req->need_card_int) { + if (host->ifmode == MEMSTICK_SERIAL) { + err = ms_read_bytes(host, MS_TPC_GET_INT, + NO_WAIT_INT, 1, &req->int_reg, NULL); + if (err < 0) + return err; + } else { + + if (int_reg & MS_INT_CMDNK) + req->int_reg |= MEMSTICK_INT_CMDNAK; + if (int_reg & MS_INT_BREQ) + req->int_reg |= MEMSTICK_INT_BREQ; + if (int_reg & MS_INT_ERR) + req->int_reg |= MEMSTICK_INT_ERR; + if (int_reg & MS_INT_CED) + req->int_reg |= MEMSTICK_INT_CED; + } + dev_dbg(ms_dev(host), "int_reg: 0x%02x\n", req->int_reg); + } + + return 0; +} + +static void rtsx_usb_ms_handle_req(struct work_struct *work) +{ + struct rtsx_usb_ms *host = container_of(work, + struct rtsx_usb_ms, handle_req); + struct rtsx_ucr *ucr = host->ucr; + struct memstick_host *msh = host->msh; + int rc; + + if (!host->req) { + do { + rc = memstick_next_req(msh, &host->req); + dev_dbg(ms_dev(host), "next req %d\n", rc); + + if (!rc) { + mutex_lock(&ucr->dev_mutex); + + if (rtsx_usb_card_exclusive_check(ucr, + RTSX_USB_MS_CARD)) + host->req->error = -EIO; + else + host->req->error = + rtsx_usb_ms_issue_cmd(host); + + mutex_unlock(&ucr->dev_mutex); + + dev_dbg(ms_dev(host), "req result %d\n", + host->req->error); + } + } while (!rc); + } + +} + +static void rtsx_usb_ms_request(struct memstick_host *msh) +{ + struct rtsx_usb_ms *host = memstick_priv(msh); + + dev_dbg(ms_dev(host), "--> %s\n", __func__); + + if (!host->eject) + schedule_work(&host->handle_req); +} + +static int rtsx_usb_ms_set_param(struct memstick_host *msh, + enum memstick_param param, int value) +{ + struct rtsx_usb_ms *host = memstick_priv(msh); + struct rtsx_ucr *ucr = host->ucr; + unsigned int clock = 0; + u8 ssc_depth = 0; + int err; + + dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n", + __func__, param, value); + + mutex_lock(&ucr->dev_mutex); + + err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_MS_CARD); + if (err) + goto out; + + switch (param) { + case MEMSTICK_POWER: + if (value == host->power_mode) + break; + + if (value == MEMSTICK_POWER_ON) { + pm_runtime_get_sync(ms_dev(host)); + err = ms_power_on(host); + } else if (value == MEMSTICK_POWER_OFF) { + err = ms_power_off(host); + if (host->msh->card) + pm_runtime_put_noidle(ms_dev(host)); + else + pm_runtime_put(ms_dev(host)); + } else + err = -EINVAL; + if (!err) + host->power_mode = value; + break; + + case MEMSTICK_INTERFACE: + if (value == MEMSTICK_SERIAL) { + clock = 19000000; + ssc_depth = SSC_DEPTH_512K; + err = rtsx_usb_write_register(ucr, MS_CFG, 0x5A, + MS_BUS_WIDTH_1 | PUSH_TIME_DEFAULT); + if (err < 0) + break; + } else if (value == MEMSTICK_PAR4) { + clock = 39000000; + ssc_depth = SSC_DEPTH_1M; + + err = rtsx_usb_write_register(ucr, MS_CFG, 0x5A, + MS_BUS_WIDTH_4 | PUSH_TIME_ODD | + MS_NO_CHECK_INT); + if (err < 0) + break; + } else { + err = -EINVAL; + break; + } + + err = rtsx_usb_switch_clock(ucr, clock, + ssc_depth, false, true, false); + if (err < 0) { + dev_dbg(ms_dev(host), "switch clock failed\n"); + break; + } + + host->ssc_depth = ssc_depth; + host->clock = clock; + host->ifmode = value; + break; + default: + err = -EINVAL; + break; + } +out: + mutex_unlock(&ucr->dev_mutex); + + /* power-on delay */ + if (param == MEMSTICK_POWER && value == MEMSTICK_POWER_ON) + usleep_range(10000, 12000); + + dev_dbg(ms_dev(host), "%s: return = %d\n", __func__, err); + return err; +} + +#ifdef CONFIG_PM_SLEEP +static int rtsx_usb_ms_suspend(struct device *dev) +{ + struct rtsx_usb_ms *host = dev_get_drvdata(dev); + struct memstick_host *msh = host->msh; + + dev_dbg(ms_dev(host), "--> %s\n", __func__); + + memstick_suspend_host(msh); + return 0; +} + +static int rtsx_usb_ms_resume(struct device *dev) +{ + struct rtsx_usb_ms *host = dev_get_drvdata(dev); + struct memstick_host *msh = host->msh; + + dev_dbg(ms_dev(host), "--> %s\n", __func__); + + memstick_resume_host(msh); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +/* + * Thread function of ms card slot detection. The thread starts right after + * successful host addition. It stops while the driver removal function sets + * host->eject true. + */ +static int rtsx_usb_detect_ms_card(void *__host) +{ + struct rtsx_usb_ms *host = (struct rtsx_usb_ms *)__host; + struct rtsx_ucr *ucr = host->ucr; + u8 val = 0; + int err; + + for (;;) { + mutex_lock(&ucr->dev_mutex); + + /* Check pending MS card changes */ + err = rtsx_usb_read_register(ucr, CARD_INT_PEND, &val); + if (err) { + mutex_unlock(&ucr->dev_mutex); + goto poll_again; + } + + /* Clear the pending */ + rtsx_usb_write_register(ucr, CARD_INT_PEND, + XD_INT | MS_INT | SD_INT, + XD_INT | MS_INT | SD_INT); + + mutex_unlock(&ucr->dev_mutex); + + if (val & MS_INT) { + dev_dbg(ms_dev(host), "MS slot change detected\n"); + memstick_detect_change(host->msh); + } + +poll_again: + if (host->eject) + break; + + msleep(1000); + } + + complete(&host->detect_ms_exit); + return 0; +} + +static int rtsx_usb_ms_drv_probe(struct platform_device *pdev) +{ + struct memstick_host *msh; + struct rtsx_usb_ms *host; + struct rtsx_ucr *ucr; + int err; + + ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent)); + if (!ucr) + return -ENXIO; + + dev_dbg(&(pdev->dev), + "Realtek USB Memstick controller found\n"); + + msh = memstick_alloc_host(sizeof(*host), &pdev->dev); + if (!msh) + return -ENOMEM; + + host = memstick_priv(msh); + host->ucr = ucr; + host->msh = msh; + host->pdev = pdev; + host->power_mode = MEMSTICK_POWER_OFF; + platform_set_drvdata(pdev, host); + + mutex_init(&host->host_mutex); + INIT_WORK(&host->handle_req, rtsx_usb_ms_handle_req); + + init_completion(&host->detect_ms_exit); + host->detect_ms = kthread_create(rtsx_usb_detect_ms_card, host, + "rtsx_usb_ms_%d", pdev->id); + if (IS_ERR(host->detect_ms)) { + dev_dbg(&(pdev->dev), + "Unable to create polling thread.\n"); + err = PTR_ERR(host->detect_ms); + goto err_out; + } + + msh->request = rtsx_usb_ms_request; + msh->set_param = rtsx_usb_ms_set_param; + msh->caps = MEMSTICK_CAP_PAR4; + + pm_runtime_enable(&pdev->dev); + err = memstick_add_host(msh); + if (err) + goto err_out; + + wake_up_process(host->detect_ms); + return 0; +err_out: + memstick_free_host(msh); + return err; +} + +static int rtsx_usb_ms_drv_remove(struct platform_device *pdev) +{ + struct rtsx_usb_ms *host = platform_get_drvdata(pdev); + struct memstick_host *msh; + int err; + + msh = host->msh; + host->eject = true; + cancel_work_sync(&host->handle_req); + + mutex_lock(&host->host_mutex); + if (host->req) { + dev_dbg(&(pdev->dev), + "%s: Controller removed during transfer\n", + dev_name(&msh->dev)); + host->req->error = -ENOMEDIUM; + do { + err = memstick_next_req(msh, &host->req); + if (!err) + host->req->error = -ENOMEDIUM; + } while (!err); + } + mutex_unlock(&host->host_mutex); + + wait_for_completion(&host->detect_ms_exit); + memstick_remove_host(msh); + memstick_free_host(msh); + + /* Balance possible unbalanced usage count + * e.g. unconditional module removal + */ + if (pm_runtime_active(ms_dev(host))) + pm_runtime_put(ms_dev(host)); + + pm_runtime_disable(&pdev->dev); + platform_set_drvdata(pdev, NULL); + + dev_dbg(&(pdev->dev), + ": Realtek USB Memstick controller has been removed\n"); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(rtsx_usb_ms_pm_ops, + rtsx_usb_ms_suspend, rtsx_usb_ms_resume); + +static struct platform_device_id rtsx_usb_ms_ids[] = { + { + .name = "rtsx_usb_ms", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, rtsx_usb_ms_ids); + +static struct platform_driver rtsx_usb_ms_driver = { + .probe = rtsx_usb_ms_drv_probe, + .remove = rtsx_usb_ms_drv_remove, + .id_table = rtsx_usb_ms_ids, + .driver = { + .owner = THIS_MODULE, + .name = "rtsx_usb_ms", + .pm = &rtsx_usb_ms_pm_ops, + }, +}; +module_platform_driver(rtsx_usb_ms_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>"); +MODULE_DESCRIPTION("Realtek USB Memstick Card Host Driver"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6deb8a11c12f..ee8204cc31e9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -67,6 +67,18 @@ config MFD_BCM590XX help Support for the BCM590xx PMUs from Broadcom +config MFD_AXP20X + bool "X-Powers AXP20X" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + If you say Y here you get support for the X-Powers AXP202 and AXP209. + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + config MFD_CROS_EC tristate "ChromeOS Embedded Controller" select MFD_CORE @@ -250,6 +262,16 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_IPAQ_MICRO + bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" + depends on SA1100_H3100 || SA1100_H3600 + select MFD_CORE + help + Select this to get support for the Microcontroller found in + the Compaq iPAQ handheld computers. This is an Atmel + AT90LS8535 microcontroller flashed with a special iPAQ + firmware using the custom protocol implemented in this driver. + config MFD_JANZ_CMODIO tristate "Janz CMOD-IO PCI MODULbus Carrier Board" select MFD_CORE @@ -675,6 +697,7 @@ config MFD_DB8500_PRCMU config MFD_STMPE bool "STMicroelectronics STMPE" depends on (I2C=y || SPI_MASTER=y) + depends on OF select MFD_CORE help Support for the STMPE family of I/O Expanders from @@ -719,6 +742,14 @@ config MFD_STA2X11 select MFD_CORE select REGMAP_MMIO +config MFD_SUN6I_PRCM + bool "Allwinner A31 PRCM controller" + depends on ARCH_SUNXI + select MFD_CORE + help + Support for the PRCM (Power/Reset/Clock Management) unit available + in A31 SoC. + config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" select REGMAP_MMIO diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index cec3487b539e..8afedba535c7 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o obj-$(CONFIG_MFD_STMPE) += stmpe.o obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o obj-$(CONFIG_STMPE_SPI) += stmpe-spi.o +obj-$(CONFIG_MFD_SUN6I_PRCM) += sun6i-prcm.o obj-$(CONFIG_MFD_TC3589X) += tc3589x.o obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o @@ -102,6 +103,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o obj-$(CONFIG_PMIC_DA9052) += da9052-core.o obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o +obj-$(CONFIG_MFD_AXP20X) += axp20x.o obj-$(CONFIG_MFD_LP3943) += lp3943.o obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o @@ -166,3 +168,4 @@ obj-$(CONFIG_MFD_RETU) += retu-mfd.o obj-$(CONFIG_MFD_AS3711) += as3711.o obj-$(CONFIG_MFD_AS3722) += as3722.o obj-$(CONFIG_MFD_STW481X) += stw481x.o +obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c index f3a15aa54d7b..fe418995108c 100644 --- a/drivers/mfd/abx500-core.c +++ b/drivers/mfd/abx500-core.c @@ -151,22 +151,6 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq) } EXPORT_SYMBOL(abx500_startup_irq_enabled); -void abx500_dump_all_banks(void) -{ - struct abx500_ops *ops; - struct device dummy_child = {NULL}; - struct abx500_device_entry *dev_entry; - - list_for_each_entry(dev_entry, &abx500_list, list) { - dummy_child.parent = dev_entry->dev; - ops = &dev_entry->ops; - - if ((ops != NULL) && (ops->dump_all_banks != NULL)) - ops->dump_all_banks(&dummy_child); - } -} -EXPORT_SYMBOL(abx500_dump_all_banks); - MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); MODULE_DESCRIPTION("ABX500 core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 07e6e27be23c..cfc191abae4a 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -583,6 +583,7 @@ static const char *wm5102_supplies[] = { "CPVDD", "SPKVDDL", "SPKVDDR", + "MICVDD", }; static const struct mfd_cell wm5102_devs[] = { diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index 88758ab9402b..17102f589100 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -285,7 +285,7 @@ int arizona_irq_init(struct arizona *arizona) IRQF_ONESHOT, -1, irq, &arizona->irq_chip); if (ret != 0) { - dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret); + dev_err(arizona->dev, "Failed to add main IRQs: %d\n", ret); goto err_aod; } diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c index ec684fcedb42..d9706ede8d39 100644 --- a/drivers/mfd/as3711.c +++ b/drivers/mfd/as3711.c @@ -114,7 +114,7 @@ static const struct regmap_config as3711_regmap_config = { }; #ifdef CONFIG_OF -static struct of_device_id as3711_of_match[] = { +static const struct of_device_id as3711_of_match[] = { {.compatible = "ams,as3711",}, {} }; diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c new file mode 100644 index 000000000000..dee653989e3a --- /dev/null +++ b/drivers/mfd/axp20x.c @@ -0,0 +1,258 @@ +/* + * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209 + * + * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC + * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as 4 configurable GPIOs. + * + * Author: Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/mfd/axp20x.h> +#include <linux/mfd/core.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> + +#define AXP20X_OFF 0x80 + +static const struct regmap_range axp20x_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), +}; + +static const struct regmap_range axp20x_volatile_ranges[] = { + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), +}; + +static const struct regmap_access_table axp20x_writeable_table = { + .yes_ranges = axp20x_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges), +}; + +static const struct regmap_access_table axp20x_volatile_table = { + .yes_ranges = axp20x_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), +}; + +static struct resource axp20x_pek_resources[] = { + { + .name = "PEK_DBR", + .start = AXP20X_IRQ_PEK_RIS_EDGE, + .end = AXP20X_IRQ_PEK_RIS_EDGE, + .flags = IORESOURCE_IRQ, + }, { + .name = "PEK_DBF", + .start = AXP20X_IRQ_PEK_FAL_EDGE, + .end = AXP20X_IRQ_PEK_FAL_EDGE, + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct regmap_config axp20x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp20x_writeable_table, + .volatile_table = &axp20x_volatile_table, + .max_register = AXP20X_FG_RES, + .cache_type = REGCACHE_RBTREE, +}; + +#define AXP20X_IRQ(_irq, _off, _mask) \ + [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } + +static const struct regmap_irq axp20x_regmap_irqs[] = { + AXP20X_IRQ(ACIN_OVER_V, 0, 7), + AXP20X_IRQ(ACIN_PLUGIN, 0, 6), + AXP20X_IRQ(ACIN_REMOVAL, 0, 5), + AXP20X_IRQ(VBUS_OVER_V, 0, 4), + AXP20X_IRQ(VBUS_PLUGIN, 0, 3), + AXP20X_IRQ(VBUS_REMOVAL, 0, 2), + AXP20X_IRQ(VBUS_V_LOW, 0, 1), + AXP20X_IRQ(BATT_PLUGIN, 1, 7), + AXP20X_IRQ(BATT_REMOVAL, 1, 6), + AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5), + AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4), + AXP20X_IRQ(CHARG, 1, 3), + AXP20X_IRQ(CHARG_DONE, 1, 2), + AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1), + AXP20X_IRQ(BATT_TEMP_LOW, 1, 0), + AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7), + AXP20X_IRQ(CHARG_I_LOW, 2, 6), + AXP20X_IRQ(DCDC1_V_LONG, 2, 5), + AXP20X_IRQ(DCDC2_V_LONG, 2, 4), + AXP20X_IRQ(DCDC3_V_LONG, 2, 3), + AXP20X_IRQ(PEK_SHORT, 2, 1), + AXP20X_IRQ(PEK_LONG, 2, 0), + AXP20X_IRQ(N_OE_PWR_ON, 3, 7), + AXP20X_IRQ(N_OE_PWR_OFF, 3, 6), + AXP20X_IRQ(VBUS_VALID, 3, 5), + AXP20X_IRQ(VBUS_NOT_VALID, 3, 4), + AXP20X_IRQ(VBUS_SESS_VALID, 3, 3), + AXP20X_IRQ(VBUS_SESS_END, 3, 2), + AXP20X_IRQ(LOW_PWR_LVL1, 3, 1), + AXP20X_IRQ(LOW_PWR_LVL2, 3, 0), + AXP20X_IRQ(TIMER, 4, 7), + AXP20X_IRQ(PEK_RIS_EDGE, 4, 6), + AXP20X_IRQ(PEK_FAL_EDGE, 4, 5), + AXP20X_IRQ(GPIO3_INPUT, 4, 3), + AXP20X_IRQ(GPIO2_INPUT, 4, 2), + AXP20X_IRQ(GPIO1_INPUT, 4, 1), + AXP20X_IRQ(GPIO0_INPUT, 4, 0), +}; + +static const struct of_device_id axp20x_of_match[] = { + { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, + { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, axp20x_of_match); + +/* + * This is useless for OF-enabled devices, but it is needed by I2C subsystem + */ +static const struct i2c_device_id axp20x_i2c_id[] = { + { }, +}; +MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); + +static const struct regmap_irq_chip axp20x_regmap_irq_chip = { + .name = "axp20x_irq_chip", + .status_base = AXP20X_IRQ1_STATE, + .ack_base = AXP20X_IRQ1_STATE, + .mask_base = AXP20X_IRQ1_EN, + .num_regs = 5, + .irqs = axp20x_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs), + .mask_invert = true, + .init_ack_masked = true, +}; + +static const char * const axp20x_supplies[] = { + "acin", + "vin2", + "vin3", + "ldo24in", + "ldo3in", + "ldo5in", +}; + +static struct mfd_cell axp20x_cells[] = { + { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp20x_pek_resources), + .resources = axp20x_pek_resources, + }, { + .name = "axp20x-regulator", + .parent_supplies = axp20x_supplies, + .num_parent_supplies = ARRAY_SIZE(axp20x_supplies), + }, +}; + +static struct axp20x_dev *axp20x_pm_power_off; +static void axp20x_power_off(void) +{ + regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, + AXP20X_OFF); +} + +static int axp20x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct axp20x_dev *axp20x; + const struct of_device_id *of_id; + int ret; + + axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); + if (!axp20x) + return -ENOMEM; + + of_id = of_match_device(axp20x_of_match, &i2c->dev); + if (!of_id) { + dev_err(&i2c->dev, "Unable to setup AXP20X data\n"); + return -ENODEV; + } + axp20x->variant = (long) of_id->data; + + axp20x->i2c_client = i2c; + axp20x->dev = &i2c->dev; + dev_set_drvdata(axp20x->dev, axp20x); + + axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config); + if (IS_ERR(axp20x->regmap)) { + ret = PTR_ERR(axp20x->regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, + IRQF_ONESHOT | IRQF_SHARED, -1, + &axp20x_regmap_irq_chip, + &axp20x->regmap_irqc); + if (ret) { + dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); + return ret; + } + + ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells, + ARRAY_SIZE(axp20x_cells), NULL, 0, NULL); + + if (ret) { + dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); + regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc); + return ret; + } + + if (!pm_power_off) { + axp20x_pm_power_off = axp20x; + pm_power_off = axp20x_power_off; + } + + dev_info(&i2c->dev, "AXP20X driver loaded\n"); + + return 0; +} + +static int axp20x_i2c_remove(struct i2c_client *i2c) +{ + struct axp20x_dev *axp20x = i2c_get_clientdata(i2c); + + if (axp20x == axp20x_pm_power_off) { + axp20x_pm_power_off = NULL; + pm_power_off = NULL; + } + + mfd_remove_devices(axp20x->dev); + regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc); + + return 0; +} + +static struct i2c_driver axp20x_i2c_driver = { + .driver = { + .name = "axp20x", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(axp20x_of_match), + }, + .probe = axp20x_i2c_probe, + .remove = axp20x_i2c_remove, + .id_table = axp20x_i2c_id, +}; + +module_i2c_driver(axp20x_i2c_driver); + +MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X"); +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c index 43cba1a1973c..e334de000e8c 100644 --- a/drivers/mfd/bcm590xx.c +++ b/drivers/mfd/bcm590xx.c @@ -96,6 +96,12 @@ err: return ret; } +static int bcm590xx_i2c_remove(struct i2c_client *i2c) +{ + mfd_remove_devices(&i2c->dev); + return 0; +} + static const struct of_device_id bcm590xx_of_match[] = { { .compatible = "brcm,bcm59056" }, { } @@ -115,6 +121,7 @@ static struct i2c_driver bcm590xx_i2c_driver = { .of_match_table = of_match_ptr(bcm590xx_of_match), }, .probe = bcm590xx_i2c_probe, + .remove = bcm590xx_i2c_remove, .id_table = bcm590xx_i2c_id, }; module_i2c_driver(bcm590xx_i2c_driver); @@ -122,4 +129,4 @@ module_i2c_driver(bcm590xx_i2c_driver); MODULE_AUTHOR("Matt Porter <mporter@linaro.org>"); MODULE_DESCRIPTION("BCM590xx multi-function driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:bcm590xx"); +MODULE_ALIAS("i2c:bcm590xx"); diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c index 783fe2e73e1e..38fe9bf0d169 100644 --- a/drivers/mfd/cros_ec.c +++ b/drivers/mfd/cros_ec.c @@ -30,7 +30,7 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, uint8_t *out; int csum, i; - BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE); + BUG_ON(msg->out_len > EC_PROTO2_MAX_PARAM_SIZE); out = ec_dev->dout; out[0] = EC_CMD_VERSION0 + msg->version; out[1] = msg->cmd; @@ -90,6 +90,11 @@ static const struct mfd_cell cros_devs[] = { .id = 1, .of_compatible = "google,cros-ec-keyb", }, + { + .name = "cros-ec-i2c-tunnel", + .id = 2, + .of_compatible = "google,cros-ec-i2c-tunnel", + }, }; int cros_ec_register(struct cros_ec_device *ec_dev) @@ -184,3 +189,6 @@ int cros_ec_resume(struct cros_ec_device *ec_dev) EXPORT_SYMBOL(cros_ec_resume); #endif + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ChromeOS EC core driver"); diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index 84af8d7a4295..0b8d32829166 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -39,14 +39,22 @@ #define EC_MSG_PREAMBLE_COUNT 32 /* - * We must get a response from the EC in 5ms. This is a very long - * time, but the flash write command can take 2-3ms. The EC command - * processing is currently not very fast (about 500us). We could - * look at speeding this up and making the flash write command a - * 'slow' command, requiring a GET_STATUS wait loop, like flash - * erase. - */ -#define EC_MSG_DEADLINE_MS 5 + * Allow for a long time for the EC to respond. We support i2c + * tunneling and support fairly long messages for the tunnel (249 + * bytes long at the moment). If we're talking to a 100 kHz device + * on the other end and need to transfer ~256 bytes, then we need: + * 10 us/bit * ~10 bits/byte * ~256 bytes = ~25ms + * + * We'll wait 4 times that to handle clock stretching and other + * paranoia. + * + * It's pretty unlikely that we'll really see a 249 byte tunnel in + * anything other than testing. If this was more common we might + * consider having slow commands like this require a GET_STATUS + * wait loop. The 'flash write' command would be another candidate + * for this, clocking in at 2-3ms. + */ +#define EC_MSG_DEADLINE_MS 100 /* * Time between raising the SPI chip select (for the end of a @@ -65,11 +73,13 @@ * if no record * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that * is sent when we want to turn off CS at the end of a transaction. + * @lock: mutex to ensure only one user of cros_ec_command_spi_xfer at a time */ struct cros_ec_spi { struct spi_device *spi; s64 last_transfer_ns; unsigned int end_of_msg_delay; + struct mutex lock; }; static void debug_packet(struct device *dev, const char *name, u8 *ptr, @@ -111,7 +121,9 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, /* Receive data until we see the header byte */ deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS); - do { + while (true) { + unsigned long start_jiffies = jiffies; + memset(&trans, 0, sizeof(trans)); trans.cs_change = 1; trans.rx_buf = ptr = ec_dev->din; @@ -132,12 +144,19 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev, break; } } + if (ptr != end) + break; - if (time_after(jiffies, deadline)) { + /* + * Use the time at the start of the loop as a timeout. This + * gives us one last shot at getting the transfer and is useful + * in case we got context switched out for a while. + */ + if (time_after(start_jiffies, deadline)) { dev_warn(ec_dev->dev, "EC failed to respond in time\n"); return -ETIMEDOUT; } - } while (ptr == end); + } /* * ptr now points to the header byte. Copy any valid data to the @@ -208,6 +227,13 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, int ret = 0, final_ret; struct timespec ts; + /* + * We have the shared ec_dev buffer plus we do lots of separate spi_sync + * calls, so we need to make sure only one person is using this at a + * time. + */ + mutex_lock(&ec_spi->lock); + len = cros_ec_prepare_tx(ec_dev, ec_msg); dev_dbg(ec_dev->dev, "prepared, len=%d\n", len); @@ -219,7 +245,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, ktime_get_ts(&ts); delay = timespec_to_ns(&ts) - ec_spi->last_transfer_ns; if (delay < EC_SPI_RECOVERY_TIME_NS) - ndelay(delay); + ndelay(EC_SPI_RECOVERY_TIME_NS - delay); } /* Transmit phase - send our message */ @@ -260,7 +286,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, ret = final_ret; if (ret < 0) { dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); - return ret; + goto exit; } /* check response error code */ @@ -269,14 +295,16 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n", ec_msg->cmd, ptr[0]); debug_packet(ec_dev->dev, "in_err", ptr, len); - return -EINVAL; + ret = -EINVAL; + goto exit; } len = ptr[1]; sum = ptr[0] + ptr[1]; if (len > ec_msg->in_len) { dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)", len, ec_msg->in_len); - return -ENOSPC; + ret = -ENOSPC; + goto exit; } /* copy response packet payload and compute checksum */ @@ -293,10 +321,14 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev, dev_err(ec_dev->dev, "bad packet checksum, expected %02x, got %02x\n", sum, ptr[len + 2]); - return -EBADMSG; + ret = -EBADMSG; + goto exit; } - return 0; + ret = 0; +exit: + mutex_unlock(&ec_spi->lock); + return ret; } static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev) @@ -327,6 +359,7 @@ static int cros_ec_spi_probe(struct spi_device *spi) if (ec_spi == NULL) return -ENOMEM; ec_spi->spi = spi; + mutex_init(&ec_spi->lock); ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL); if (!ec_dev) return -ENOMEM; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index b11fdd63eecd..193cf168ba84 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2300,9 +2300,6 @@ int prcmu_ac_wake_req(void) if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, msecs_to_jiffies(5000))) { -#if defined(CONFIG_DBX500_PRCMU_DEBUG) - db8500_prcmu_debug_dump(__func__, true, true); -#endif pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n", __func__); ret = -EFAULT; @@ -3112,7 +3109,7 @@ static int db8500_prcmu_register_ab8500(struct device *parent, { struct device_node *np; struct resource ab8500_resource; - struct mfd_cell ab8500_cell = { + const struct mfd_cell ab8500_cell = { .name = "ab8500-core", .of_compatible = "stericsson,ab8500", .id = AB8500_VERSION_AB8500, diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c new file mode 100644 index 000000000000..7e50fe0118e3 --- /dev/null +++ b/drivers/mfd/ipaq-micro.c @@ -0,0 +1,482 @@ +/* + * Compaq iPAQ h3xxx Atmel microcontroller companion support + * + * This is an Atmel AT90LS8535 with a special flashed-in firmware that + * implements the special protocol used by this driver. + * + * based on previous kernel 2.4 version by Andrew Christian + * Author : Alessandro Gardich <gremlin@gremlin.it> + * Author : Dmitry Artamonow <mad_soft@inbox.ru> + * Author : Linus Walleij <linus.walleij@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mfd/core.h> +#include <linux/mfd/ipaq-micro.h> +#include <linux/string.h> +#include <linux/random.h> +#include <linux/slab.h> +#include <linux/list.h> + +#include <mach/hardware.h> + +static void ipaq_micro_trigger_tx(struct ipaq_micro *micro) +{ + struct ipaq_micro_txdev *tx = µ->tx; + struct ipaq_micro_msg *msg = micro->msg; + int i, bp; + u8 checksum; + u32 val; + + bp = 0; + tx->buf[bp++] = CHAR_SOF; + + checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f); + tx->buf[bp++] = checksum; + + for (i = 0; i < msg->tx_len; i++) { + tx->buf[bp++] = msg->tx_data[i]; + checksum += msg->tx_data[i]; + } + + tx->buf[bp++] = checksum; + tx->len = bp; + tx->index = 0; + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1, + tx->buf, tx->len, true); + + /* Enable interrupt */ + val = readl(micro->base + UTCR3); + val |= UTCR3_TIE; + writel(val, micro->base + UTCR3); +} + +int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg) +{ + unsigned long flags; + + dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len); + + spin_lock_irqsave(µ->lock, flags); + if (micro->msg) { + list_add_tail(&msg->node, µ->queue); + spin_unlock_irqrestore(µ->lock, flags); + return 0; + } + micro->msg = msg; + ipaq_micro_trigger_tx(micro); + spin_unlock_irqrestore(µ->lock, flags); + return 0; +} +EXPORT_SYMBOL(ipaq_micro_tx_msg); + +static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data) +{ + int i; + + dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len); + + spin_lock(µ->lock); + switch (id) { + case MSG_VERSION: + case MSG_EEPROM_READ: + case MSG_EEPROM_WRITE: + case MSG_BACKLIGHT: + case MSG_NOTIFY_LED: + case MSG_THERMAL_SENSOR: + case MSG_BATTERY: + /* Handle synchronous messages */ + if (micro->msg && micro->msg->id == id) { + struct ipaq_micro_msg *msg = micro->msg; + + memcpy(msg->rx_data, data, len); + msg->rx_len = len; + complete(µ->msg->ack); + if (!list_empty(µ->queue)) { + micro->msg = list_entry(micro->queue.next, + struct ipaq_micro_msg, + node); + list_del_init(µ->msg->node); + ipaq_micro_trigger_tx(micro); + } else + micro->msg = NULL; + dev_dbg(micro->dev, "OK RX message 0x%02x\n", id); + } else { + dev_err(micro->dev, + "out of band RX message 0x%02x\n", id); + if(!micro->msg) + dev_info(micro->dev, "no message queued\n"); + else + dev_info(micro->dev, "expected message %02x\n", + micro->msg->id); + } + break; + case MSG_KEYBOARD: + if (micro->key) + micro->key(micro->key_data, len, data); + else + dev_dbg(micro->dev, "key message ignored, no handle \n"); + break; + case MSG_TOUCHSCREEN: + if (micro->ts) + micro->ts(micro->ts_data, len, data); + else + dev_dbg(micro->dev, "touchscreen message ignored, no handle \n"); + break; + default: + dev_err(micro->dev, + "unknown msg %d [%d] ", id, len); + for (i = 0; i < len; ++i) + pr_cont("0x%02x ", data[i]); + pr_cont("\n"); + } + spin_unlock(µ->lock); +} + +static void micro_process_char(struct ipaq_micro *micro, u8 ch) +{ + struct ipaq_micro_rxdev *rx = µ->rx; + + switch (rx->state) { + case STATE_SOF: /* Looking for SOF */ + if (ch == CHAR_SOF) + rx->state = STATE_ID; /* Next byte is the id and len */ + break; + case STATE_ID: /* Looking for id and len byte */ + rx->id = (ch & 0xf0) >> 4 ; + rx->len = (ch & 0x0f); + rx->index = 0; + rx->chksum = ch; + rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM; + break; + case STATE_DATA: /* Looking for 'len' data bytes */ + rx->chksum += ch; + rx->buf[rx->index] = ch; + if (++rx->index == rx->len) + rx->state = STATE_CHKSUM; + break; + case STATE_CHKSUM: /* Looking for the checksum */ + if (ch == rx->chksum) + micro_rx_msg(micro, rx->id, rx->len, rx->buf); + rx->state = STATE_SOF; + break; + } +} + +static void micro_rx_chars(struct ipaq_micro *micro) +{ + u32 status, ch; + + while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) { + ch = readl(micro->base + UTDR); + if (status & UTSR1_PRE) + dev_err(micro->dev, "rx: parity error\n"); + else if (status & UTSR1_FRE) + dev_err(micro->dev, "rx: framing error\n"); + else if (status & UTSR1_ROR) + dev_err(micro->dev, "rx: overrun error\n"); + micro_process_char(micro, ch); + } +} + +static void ipaq_micro_get_version(struct ipaq_micro *micro) +{ + struct ipaq_micro_msg msg = { + .id = MSG_VERSION, + }; + + ipaq_micro_tx_msg_sync(micro, &msg); + if (msg.rx_len == 4) { + memcpy(micro->version, msg.rx_data, 4); + micro->version[4] = '\0'; + } else if (msg.rx_len == 9) { + memcpy(micro->version, msg.rx_data, 4); + micro->version[4] = '\0'; + /* Bytes 4-7 are "pack", byte 8 is "boot type" */ + } else { + dev_err(micro->dev, + "illegal version message %d bytes\n", msg.rx_len); + } +} + +static void ipaq_micro_eeprom_read(struct ipaq_micro *micro, + u8 address, u8 len, u8 *data) +{ + struct ipaq_micro_msg msg = { + .id = MSG_EEPROM_READ, + }; + u8 i; + + for (i = 0; i < len; i++) { + msg.tx_data[0] = address + i; + msg.tx_data[1] = 1; + msg.tx_len = 2; + ipaq_micro_tx_msg_sync(micro, &msg); + memcpy(data + (i * 2), msg.rx_data, 2); + } +} + +static char *ipaq_micro_str(u8 *wchar, u8 len) +{ + char retstr[256]; + u8 i; + + for (i = 0; i < len / 2; i++) + retstr[i] = wchar[i * 2]; + return kstrdup(retstr, GFP_KERNEL); +} + +static u16 ipaq_micro_to_u16(u8 *data) +{ + return data[1] << 8 | data[0]; +} + +static void ipaq_micro_eeprom_dump(struct ipaq_micro *micro) +{ + u8 dump[256]; + char *str; + + ipaq_micro_eeprom_read(micro, 0, 128, dump); + str = ipaq_micro_str(dump, 10); + if (str) { + dev_info(micro->dev, "HM version %s\n", str); + kfree(str); + } + str = ipaq_micro_str(dump+10, 40); + if (str) { + dev_info(micro->dev, "serial number: %s\n", str); + /* Feed the random pool with this */ + add_device_randomness(str, strlen(str)); + kfree(str); + } + str = ipaq_micro_str(dump+50, 20); + if (str) { + dev_info(micro->dev, "module ID: %s\n", str); + kfree(str); + } + str = ipaq_micro_str(dump+70, 10); + if (str) { + dev_info(micro->dev, "product revision: %s\n", str); + kfree(str); + } + dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80)); + dev_info(micro->dev, "frame rate: %u fps\n", + ipaq_micro_to_u16(dump+82)); + dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84)); + dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86)); + dev_info(micro->dev, "color display: %s\n", + ipaq_micro_to_u16(dump+88) ? "yes" : "no"); + dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90)); + dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92)); + dev_info(micro->dev, "screen: %u x %u\n", + ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96)); + print_hex_dump(KERN_DEBUG, "eeprom: ", DUMP_PREFIX_OFFSET, 16, 1, + dump, 256, true); + +} + +static void micro_tx_chars(struct ipaq_micro *micro) +{ + struct ipaq_micro_txdev *tx = µ->tx; + u32 val; + + while ((tx->index < tx->len) && + (readl(micro->base + UTSR1) & UTSR1_TNF)) { + writel(tx->buf[tx->index], micro->base + UTDR); + tx->index++; + } + + /* Stop interrupts */ + val = readl(micro->base + UTCR3); + val &= ~UTCR3_TIE; + writel(val, micro->base + UTCR3); +} + +static void micro_reset_comm(struct ipaq_micro *micro) +{ + struct ipaq_micro_rxdev *rx = µ->rx; + u32 val; + + if (micro->msg) + complete(µ->msg->ack); + + /* Initialize Serial channel protocol frame */ + rx->state = STATE_SOF; /* Reset the state machine */ + + /* Set up interrupts */ + writel(0x01, micro->sdlc + 0x0); /* Select UART mode */ + + /* Clean up CR3 */ + writel(0x0, micro->base + UTCR3); + + /* Format: 8N1 */ + writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0); + + /* Baud rate: 115200 */ + writel(0x0, micro->base + UTCR1); + writel(0x1, micro->base + UTCR2); + + /* Clear SR0 */ + writel(0xff, micro->base + UTSR0); + + /* Enable RX int, disable TX int */ + writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3); + val = readl(micro->base + UTCR3); + val &= ~UTCR3_TIE; + writel(val, micro->base + UTCR3); +} + +static irqreturn_t micro_serial_isr(int irq, void *dev_id) +{ + struct ipaq_micro *micro = dev_id; + struct ipaq_micro_txdev *tx = µ->tx; + u32 status; + + status = readl(micro->base + UTSR0); + do { + if (status & (UTSR0_RID | UTSR0_RFS)) { + if (status & UTSR0_RID) + /* Clear the Receiver IDLE bit */ + writel(UTSR0_RID, micro->base + UTSR0); + micro_rx_chars(micro); + } + + /* Clear break bits */ + if (status & (UTSR0_RBB | UTSR0_REB)) + writel(status & (UTSR0_RBB | UTSR0_REB), + micro->base + UTSR0); + + if (status & UTSR0_TFS) + micro_tx_chars(micro); + + status = readl(micro->base + UTSR0); + + } while (((tx->index < tx->len) && (status & UTSR0_TFS)) || + (status & (UTSR0_RFS | UTSR0_RID))); + + return IRQ_HANDLED; +} + +static const struct mfd_cell micro_cells[] = { + { .name = "ipaq-micro-backlight", }, + { .name = "ipaq-micro-battery", }, + { .name = "ipaq-micro-keys", }, + { .name = "ipaq-micro-ts", }, + { .name = "ipaq-micro-leds", }, +}; + +static int micro_resume(struct device *dev) +{ + struct ipaq_micro *micro = dev_get_drvdata(dev); + + micro_reset_comm(micro); + mdelay(10); + + return 0; +} + +static int micro_probe(struct platform_device *pdev) +{ + struct ipaq_micro *micro; + struct resource *res; + int ret; + int irq; + + micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL); + if (!micro) + return -ENOMEM; + + micro->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + micro->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(micro->base)) + return PTR_ERR(micro->base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + return -EINVAL; + + micro->sdlc = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(micro->sdlc)) + return PTR_ERR(micro->sdlc); + + micro_reset_comm(micro); + + irq = platform_get_irq(pdev, 0); + if (!irq) + return -EINVAL; + ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr, + IRQF_SHARED, "ipaq-micro", + micro); + if (ret) { + dev_err(&pdev->dev, "unable to grab serial port IRQ\n"); + return ret; + } else + dev_info(&pdev->dev, "grabbed serial port IRQ\n"); + + spin_lock_init(µ->lock); + INIT_LIST_HEAD(µ->queue); + platform_set_drvdata(pdev, micro); + + ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells, + ARRAY_SIZE(micro_cells), NULL, 0, NULL); + if (ret) { + dev_err(&pdev->dev, "error adding MFD cells"); + return ret; + } + + /* Check version */ + ipaq_micro_get_version(micro); + dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version); + ipaq_micro_eeprom_dump(micro); + + return 0; +} + +static int micro_remove(struct platform_device *pdev) +{ + struct ipaq_micro *micro = platform_get_drvdata(pdev); + u32 val; + + mfd_remove_devices(&pdev->dev); + + val = readl(micro->base + UTCR3); + val &= ~(UTCR3_RXE | UTCR3_RIE); /* disable receive interrupt */ + val &= ~(UTCR3_TXE | UTCR3_TIE); /* disable transmit interrupt */ + writel(val, micro->base + UTCR3); + + return 0; +} + +static const struct dev_pm_ops micro_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(NULL, micro_resume) +}; + +static struct platform_driver micro_device_driver = { + .driver = { + .name = "ipaq-h3xxx-micro", + .pm = µ_dev_pm_ops, + }, + .probe = micro_probe, + .remove = micro_remove, + /* .shutdown = micro_suspend, // FIXME */ +}; +module_platform_driver(micro_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("driver for iPAQ Atmel micro core and backlight"); diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c index 07692604e119..f7ff0188603d 100644 --- a/drivers/mfd/kempld-core.c +++ b/drivers/mfd/kempld-core.c @@ -86,7 +86,7 @@ enum kempld_cells { KEMPLD_UART, }; -static struct mfd_cell kempld_devs[] = { +static const struct mfd_cell kempld_devs[] = { [KEMPLD_I2C] = { .name = "kempld-i2c", }, @@ -288,9 +288,38 @@ EXPORT_SYMBOL_GPL(kempld_release_mutex); */ static int kempld_get_info(struct kempld_device_data *pld) { + int ret; struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + char major, minor; + + ret = pdata->get_info(pld); + if (ret) + return ret; + + /* The Kontron PLD firmware version string has the following format: + * Pwxy.zzzz + * P: Fixed + * w: PLD number - 1 hex digit + * x: Major version - 1 alphanumerical digit (0-9A-V) + * y: Minor version - 1 alphanumerical digit (0-9A-V) + * zzzz: Build number - 4 zero padded hex digits */ - return pdata->get_info(pld); + if (pld->info.major < 10) + major = pld->info.major + '0'; + else + major = (pld->info.major - 10) + 'A'; + if (pld->info.minor < 10) + minor = pld->info.minor + '0'; + else + minor = (pld->info.minor - 10) + 'A'; + + ret = scnprintf(pld->info.version, sizeof(pld->info.version), + "P%X%c%c.%04X", pld->info.number, major, minor, + pld->info.buildnr); + if (ret < 0) + return ret; + + return 0; } /* @@ -307,9 +336,71 @@ static int kempld_register_cells(struct kempld_device_data *pld) return pdata->register_cells(pld); } +static const char *kempld_get_type_string(struct kempld_device_data *pld) +{ + const char *version_type; + + switch (pld->info.type) { + case 0: + version_type = "release"; + break; + case 1: + version_type = "debug"; + break; + case 2: + version_type = "custom"; + break; + default: + version_type = "unspecified"; + break; + } + + return version_type; +} + +static ssize_t kempld_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kempld_device_data *pld = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%s\n", pld->info.version); +} + +static ssize_t kempld_specification_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kempld_device_data *pld = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%d.%d\n", pld->info.spec_major, + pld->info.spec_minor); +} + +static ssize_t kempld_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kempld_device_data *pld = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%s\n", kempld_get_type_string(pld)); +} + +static DEVICE_ATTR(pld_version, S_IRUGO, kempld_version_show, NULL); +static DEVICE_ATTR(pld_specification, S_IRUGO, kempld_specification_show, + NULL); +static DEVICE_ATTR(pld_type, S_IRUGO, kempld_type_show, NULL); + +static struct attribute *pld_attributes[] = { + &dev_attr_pld_version.attr, + &dev_attr_pld_specification.attr, + &dev_attr_pld_type.attr, + NULL +}; + +static const struct attribute_group pld_attr_group = { + .attrs = pld_attributes, +}; + static int kempld_detect_device(struct kempld_device_data *pld) { - char *version_type; u8 index_reg; int ret; @@ -335,27 +426,19 @@ static int kempld_detect_device(struct kempld_device_data *pld) if (ret) return ret; - switch (pld->info.type) { - case 0: - version_type = "release"; - break; - case 1: - version_type = "debug"; - break; - case 2: - version_type = "custom"; - break; - default: - version_type = "unspecified"; - } + dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n", + pld->info.version, kempld_get_type_string(pld), + pld->info.spec_major, pld->info.spec_minor); + + ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group); + if (ret) + return ret; - dev_info(pld->dev, "Found Kontron PLD %d\n", pld->info.number); - dev_info(pld->dev, "%s version %d.%d build %d, specification %d.%d\n", - version_type, pld->info.major, pld->info.minor, - pld->info.buildnr, pld->info.spec_major, - pld->info.spec_minor); + ret = kempld_register_cells(pld); + if (ret) + sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); - return kempld_register_cells(pld); + return ret; } static int kempld_probe(struct platform_device *pdev) @@ -399,6 +482,8 @@ static int kempld_remove(struct platform_device *pdev) struct kempld_device_data *pld = platform_get_drvdata(pdev); struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); + mfd_remove_devices(&pdev->dev); pdata->release_hardware_mutex(pld); diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c index e32226836fb4..335b930112b2 100644 --- a/drivers/mfd/lp3943.c +++ b/drivers/mfd/lp3943.c @@ -62,7 +62,7 @@ static const struct lp3943_reg_cfg lp3943_mux_cfg[] = { { LP3943_REG_MUX3, 0xC0, 6 }, }; -static struct mfd_cell lp3943_devs[] = { +static const struct mfd_cell lp3943_devs[] = { { .name = "lp3943-pwm", .of_compatible = "ti,lp3943-pwm", diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 3f10ea3f45d1..7d8482ff5868 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -488,6 +488,7 @@ static struct lpc_ich_info lpc_chipset_info[] = { [LPC_PPT] = { .name = "Panther Point", .iTCO_version = 2, + .gpio_version = ICH_V5_GPIO, }, [LPC_LPT] = { .name = "Lynx Point", diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index 484d372a4892..4a5e885383f8 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -26,7 +26,7 @@ #include <linux/mfd/max14577.h> #include <linux/mfd/max14577-private.h> -static struct mfd_cell max14577_devs[] = { +static const struct mfd_cell max14577_devs[] = { { .name = "max14577-muic", .of_compatible = "maxim,max14577-muic", @@ -38,7 +38,7 @@ static struct mfd_cell max14577_devs[] = { { .name = "max14577-charger", }, }; -static struct mfd_cell max77836_devs[] = { +static const struct mfd_cell max77836_devs[] = { { .name = "max77836-muic", .of_compatible = "maxim,max77836-muic", @@ -57,7 +57,7 @@ static struct mfd_cell max77836_devs[] = { }, }; -static struct of_device_id max14577_dt_match[] = { +static const struct of_device_id max14577_dt_match[] = { { .compatible = "maxim,max14577", .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, @@ -292,7 +292,7 @@ static int max14577_i2c_probe(struct i2c_client *i2c, struct device_node *np = i2c->dev.of_node; int ret = 0; const struct regmap_irq_chip *irq_chip; - struct mfd_cell *mfd_devs; + const struct mfd_cell *mfd_devs; unsigned int mfd_devs_size; int irq_flags; @@ -331,7 +331,8 @@ static int max14577_i2c_probe(struct i2c_client *i2c, of_id = of_match_device(max14577_dt_match, &i2c->dev); if (of_id) - max14577->dev_type = (unsigned int)of_id->data; + max14577->dev_type = + (enum maxim_device_type)of_id->data; } else { max14577->dev_type = id->driver_data; } @@ -414,20 +415,18 @@ static int max14577_suspend(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct max14577 *max14577 = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev)) enable_irq_wake(max14577->irq); - /* - * MUIC IRQ must be disabled during suspend if this is - * a wake up source because it will be handled before - * resuming I2C. - * - * When device is woken up from suspend (e.g. by ADC change), - * an interrupt occurs before resuming I2C bus controller. - * Interrupt handler tries to read registers but this read - * will fail because I2C is still suspended. - */ - disable_irq(max14577->irq); - } + /* + * MUIC IRQ must be disabled during suspend because if it happens + * while suspended it will be handled before resuming I2C. + * + * When device is woken up from suspend (e.g. by ADC change), + * an interrupt occurs before resuming I2C bus controller. + * Interrupt handler tries to read registers but this read + * will fail because I2C is still suspended. + */ + disable_irq(max14577->irq); return 0; } @@ -437,10 +436,9 @@ static int max14577_resume(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct max14577 *max14577 = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev)) disable_irq_wake(max14577->irq); - enable_irq(max14577->irq); - } + enable_irq(max14577->irq); return 0; } diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index e5fce765accb..ce869acf27ae 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -47,7 +47,7 @@ static struct regmap_config max77686_regmap_config = { }; #ifdef CONFIG_OF -static struct of_device_id max77686_pmic_dt_match[] = { +static const struct of_device_id max77686_pmic_dt_match[] = { {.compatible = "maxim,max77686", .data = NULL}, {}, }; diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index c5535f018466..7e05428c756d 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -243,7 +243,7 @@ static const struct dev_pm_ops max77693_pm = { }; #ifdef CONFIG_OF -static struct of_device_id max77693_dt_match[] = { +static const struct of_device_id max77693_dt_match[] = { { .compatible = "maxim,max77693" }, {}, }; diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c index 07740314b29d..232749c8813d 100644 --- a/drivers/mfd/max8907.c +++ b/drivers/mfd/max8907.c @@ -305,7 +305,7 @@ static int max8907_i2c_remove(struct i2c_client *i2c) } #ifdef CONFIG_OF -static struct of_device_id max8907_of_match[] = { +static const struct of_device_id max8907_of_match[] = { { .compatible = "maxim,max8907" }, { }, }; diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 8cf7a015cfe5..595364ee178a 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -51,7 +51,7 @@ static const struct mfd_cell max8997_devs[] = { }; #ifdef CONFIG_OF -static struct of_device_id max8997_pmic_dt_match[] = { +static const struct of_device_id max8997_pmic_dt_match[] = { { .compatible = "maxim,max8997-pmic", .data = (void *)TYPE_MAX8997 }, {}, }; diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 592db06098e6..a37cb7444b6e 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -132,7 +132,7 @@ int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask) EXPORT_SYMBOL(max8998_update_reg); #ifdef CONFIG_OF -static struct of_device_id max8998_dt_match[] = { +static const struct of_device_id max8998_dt_match[] = { { .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 }, { .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 }, { .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 }, diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 0c6c21c5b1a8..acf5dd712eb2 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -660,34 +660,22 @@ int mc13xxx_common_init(struct device *dev) if (ret) return ret; + mutex_init(&mc13xxx->lock); + ret = request_threaded_irq(mc13xxx->irq, NULL, mc13xxx_irq_thread, IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx); if (ret) return ret; - mutex_init(&mc13xxx->lock); - if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata) mc13xxx->flags = pdata->flags; if (mc13xxx->flags & MC13XXX_USE_ADC) mc13xxx_add_subdevice(mc13xxx, "%s-adc"); - if (mc13xxx->flags & MC13XXX_USE_CODEC) { - if (pdata) - mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec", - pdata->codec, sizeof(*pdata->codec)); - else - mc13xxx_add_subdevice(mc13xxx, "%s-codec"); - } - if (mc13xxx->flags & MC13XXX_USE_RTC) mc13xxx_add_subdevice(mc13xxx, "%s-rtc"); - if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN) - mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts", - &pdata->touch, sizeof(pdata->touch)); - if (pdata) { mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator", &pdata->regulators, sizeof(pdata->regulators)); @@ -695,10 +683,20 @@ int mc13xxx_common_init(struct device *dev) pdata->leds, sizeof(*pdata->leds)); mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton", pdata->buttons, sizeof(*pdata->buttons)); + if (mc13xxx->flags & MC13XXX_USE_CODEC) + mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec", + pdata->codec, sizeof(*pdata->codec)); + if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN) + mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts", + &pdata->touch, sizeof(pdata->touch)); } else { mc13xxx_add_subdevice(mc13xxx, "%s-regulator"); mc13xxx_add_subdevice(mc13xxx, "%s-led"); mc13xxx_add_subdevice(mc13xxx, "%s-pwrbutton"); + if (mc13xxx->flags & MC13XXX_USE_CODEC) + mc13xxx_add_subdevice(mc13xxx, "%s-codec"); + if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN) + mc13xxx_add_subdevice(mc13xxx, "%s-ts"); } return 0; diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c index ad25bfa3fb02..5e2667afe2bc 100644 --- a/drivers/mfd/menelaus.c +++ b/drivers/mfd/menelaus.c @@ -1287,29 +1287,8 @@ static struct i2c_driver menelaus_i2c_driver = { .id_table = menelaus_id, }; -static int __init menelaus_init(void) -{ - int res; - - res = i2c_add_driver(&menelaus_i2c_driver); - if (res < 0) { - pr_err(DRIVER_NAME ": driver registration failed\n"); - return res; - } - - return 0; -} - -static void __exit menelaus_exit(void) -{ - i2c_del_driver(&menelaus_i2c_driver); - - /* FIXME: Shutdown menelaus parts that can be shut down */ -} +module_i2c_driver(menelaus_i2c_driver); MODULE_AUTHOR("Texas Instruments, Inc. (and others)"); MODULE_DESCRIPTION("I2C interface for Menelaus."); MODULE_LICENSE("GPL"); - -module_init(menelaus_init); -module_exit(menelaus_exit); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 267649244737..892d343193ad 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -102,7 +102,7 @@ static int mfd_add_device(struct device *parent, int id, pdev->dev.dma_mask = parent->dma_mask; pdev->dev.dma_parms = parent->dma_parms; - ret = devm_regulator_bulk_register_supply_alias( + ret = regulator_bulk_register_supply_alias( &pdev->dev, cell->parent_supplies, parent, cell->parent_supplies, cell->num_parent_supplies); @@ -182,9 +182,9 @@ static int mfd_add_device(struct device *parent, int id, return 0; fail_alias: - devm_regulator_bulk_unregister_supply_alias(&pdev->dev, - cell->parent_supplies, - cell->num_parent_supplies); + regulator_bulk_unregister_supply_alias(&pdev->dev, + cell->parent_supplies, + cell->num_parent_supplies); fail_res: kfree(res); fail_device: @@ -238,6 +238,9 @@ static int mfd_remove_devices_fn(struct device *dev, void *c) pdev = to_platform_device(dev); cell = mfd_get_cell(pdev); + regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies, + cell->num_parent_supplies); + /* find the base address of usage_count pointers (for freeing) */ if (!*usage_count || (cell->usage_count < *usage_count)) *usage_count = cell->usage_count; diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 651e249287dc..b48d80c367f9 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -557,7 +557,7 @@ static int usbhs_omap_get_dt_pdata(struct device *dev, return 0; } -static struct of_device_id usbhs_child_match_table[] = { +static const struct of_device_id usbhs_child_match_table[] = { { .compatible = "ti,omap-ehci", }, { .compatible = "ti,omap-ohci", }, { } diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c index b97a97187ae9..959513803542 100644 --- a/drivers/mfd/pm8921-core.c +++ b/drivers/mfd/pm8921-core.c @@ -26,7 +26,6 @@ #include <linux/regmap.h> #include <linux/of_platform.h> #include <linux/mfd/core.h> -#include <linux/mfd/pm8xxx/core.h> #define SSBI_REG_ADDR_IRQ_BASE 0x1BB @@ -57,7 +56,6 @@ #define PM8921_NR_IRQS 256 struct pm_irq_chip { - struct device *dev; struct regmap *regmap; spinlock_t pm_irq_lock; struct irq_domain *irqdomain; @@ -67,11 +65,6 @@ struct pm_irq_chip { u8 config[0]; }; -struct pm8921 { - struct device *dev; - struct pm_irq_chip *irq_chip; -}; - static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp, unsigned int *ip) { @@ -255,55 +248,6 @@ static struct irq_chip pm8xxx_irq_chip = { .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE, }; -/** - * pm8xxx_get_irq_stat - get the status of the irq line - * @chip: pointer to identify a pmic irq controller - * @irq: the irq number - * - * The pm8xxx gpio and mpp rely on the interrupt block to read - * the values on their pins. This function is to facilitate reading - * the status of a gpio or an mpp line. The caller has to convert the - * gpio number to irq number. - * - * RETURNS: - * an int indicating the value read on that line - */ -static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) -{ - int pmirq, rc; - unsigned int block, bits, bit; - unsigned long flags; - struct irq_data *irq_data = irq_get_irq_data(irq); - - pmirq = irq_data->hwirq; - - block = pmirq / 8; - bit = pmirq % 8; - - spin_lock_irqsave(&chip->pm_irq_lock, flags); - - rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block); - if (rc) { - pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n", - irq, pmirq, block, rc); - goto bail_out; - } - - rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits); - if (rc) { - pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n", - irq, pmirq, block, rc); - goto bail_out; - } - - rc = (bits & (1 << bit)) ? 1 : 0; - -bail_out: - spin_unlock_irqrestore(&chip->pm_irq_lock, flags); - - return rc; -} - static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq) { @@ -324,56 +268,6 @@ static const struct irq_domain_ops pm8xxx_irq_domain_ops = { .map = pm8xxx_irq_domain_map, }; -static int pm8921_readb(const struct device *dev, u16 addr, u8 *val) -{ - const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev); - const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data; - - return ssbi_read(pmic->dev->parent, addr, val, 1); -} - -static int pm8921_writeb(const struct device *dev, u16 addr, u8 val) -{ - const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev); - const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data; - - return ssbi_write(pmic->dev->parent, addr, &val, 1); -} - -static int pm8921_read_buf(const struct device *dev, u16 addr, u8 *buf, - int cnt) -{ - const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev); - const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data; - - return ssbi_read(pmic->dev->parent, addr, buf, cnt); -} - -static int pm8921_write_buf(const struct device *dev, u16 addr, u8 *buf, - int cnt) -{ - const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev); - const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data; - - return ssbi_write(pmic->dev->parent, addr, buf, cnt); -} - -static int pm8921_read_irq_stat(const struct device *dev, int irq) -{ - const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev); - const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data; - - return pm8xxx_get_irq_stat(pmic->irq_chip, irq); -} - -static struct pm8xxx_drvdata pm8921_drvdata = { - .pmic_readb = pm8921_readb, - .pmic_writeb = pm8921_writeb, - .pmic_read_buf = pm8921_read_buf, - .pmic_write_buf = pm8921_write_buf, - .pmic_read_irq_stat = pm8921_read_irq_stat, -}; - static const struct regmap_config ssbi_regmap_config = { .reg_bits = 16, .val_bits = 8, @@ -392,7 +286,6 @@ MODULE_DEVICE_TABLE(of, pm8921_id_table); static int pm8921_probe(struct platform_device *pdev) { - struct pm8921 *pmic; struct regmap *regmap; int irq, rc; unsigned int val; @@ -404,12 +297,6 @@ static int pm8921_probe(struct platform_device *pdev) if (irq < 0) return irq; - pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL); - if (!pmic) { - pr_err("Cannot alloc pm8921 struct\n"); - return -ENOMEM; - } - regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent, &ssbi_regmap_config); if (IS_ERR(regmap)) @@ -434,18 +321,13 @@ static int pm8921_probe(struct platform_device *pdev) pr_info("PMIC revision 2: %02X\n", val); rev |= val << BITS_PER_BYTE; - pmic->dev = &pdev->dev; - pm8921_drvdata.pm_chip_data = pmic; - platform_set_drvdata(pdev, &pm8921_drvdata); - chip = devm_kzalloc(&pdev->dev, sizeof(*chip) + sizeof(chip->config[0]) * nirqs, GFP_KERNEL); if (!chip) return -ENOMEM; - pmic->irq_chip = chip; - chip->dev = &pdev->dev; + platform_set_drvdata(pdev, chip); chip->regmap = regmap; chip->num_irqs = nirqs; chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8); @@ -481,8 +363,7 @@ static int pm8921_remove_child(struct device *dev, void *unused) static int pm8921_remove(struct platform_device *pdev) { int irq = platform_get_irq(pdev, 0); - struct pm8921 *pmic = pm8921_drvdata.pm_chip_data; - struct pm_irq_chip *chip = pmic->irq_chip; + struct pm_irq_chip *chip = platform_get_drvdata(pdev); device_for_each_child(&pdev->dev, NULL, pm8921_remove_child); irq_set_chained_handler(irq, NULL); diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index c79569750be9..6575585f1d1f 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -38,7 +38,7 @@ static struct resource rdc321x_wdt_resource[] = { }; static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = { - .max_gpios = RDC321X_MAX_GPIO, + .max_gpios = RDC321X_NUM_GPIO, }; static struct resource rdc321x_gpio_resources[] = { diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c index b53b9d46cc45..6352bec8419a 100644 --- a/drivers/mfd/rtsx_usb.c +++ b/drivers/mfd/rtsx_usb.c @@ -29,7 +29,7 @@ static int polling_pipe = 1; module_param(polling_pipe, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)"); -static struct mfd_cell rtsx_usb_cells[] = { +static const struct mfd_cell rtsx_usb_cells[] = { [RTSX_USB_SD_CARD] = { .name = "rtsx_usb_sdmmc", .pdata_size = 0, @@ -67,7 +67,7 @@ static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr, ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout); add_timer(&ucr->sg_timer); usb_sg_wait(&ucr->current_sg); - del_timer(&ucr->sg_timer); + del_timer_sync(&ucr->sg_timer); if (act_len) *act_len = ucr->current_sg.bytes; @@ -644,14 +644,14 @@ static int rtsx_usb_probe(struct usb_interface *intf, if (ret) goto out_init_fail; + /* initialize USB SG transfer timer */ + setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr); + ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells, ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL); if (ret) goto out_init_fail; - /* initialize USB SG transfer timer */ - init_timer(&ucr->sg_timer); - setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr); #ifdef CONFIG_PM intf->needs_remote_wakeup = 1; usb_enable_autosuspend(usb_dev); @@ -687,9 +687,15 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message) dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n", __func__, message.event); + /* + * Call to make sure LED is off during suspend to save more power. + * It is NOT a permanent state and could be turned on anytime later. + * Thus no need to call turn_on when resunming. + */ mutex_lock(&ucr->dev_mutex); rtsx_usb_turn_off_led(ucr); mutex_unlock(&ucr->dev_mutex); + return 0; } diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 1cf27521fff4..be06d0abbf19 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -25,7 +25,6 @@ #include <linux/mfd/core.h> #include <linux/mfd/samsung/core.h> #include <linux/mfd/samsung/irq.h> -#include <linux/mfd/samsung/rtc.h> #include <linux/mfd/samsung/s2mpa01.h> #include <linux/mfd/samsung/s2mps11.h> #include <linux/mfd/samsung/s2mps14.h> @@ -91,7 +90,7 @@ static const struct mfd_cell s2mpa01_devs[] = { }; #ifdef CONFIG_OF -static struct of_device_id sec_dt_match[] = { +static const struct of_device_id sec_dt_match[] = { { .compatible = "samsung,s5m8767-pmic", .data = (void *)S5M8767X, }, { @@ -196,20 +195,6 @@ static const struct regmap_config s5m8767_regmap_config = { .cache_type = REGCACHE_FLAT, }; -static const struct regmap_config s5m_rtc_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = SEC_RTC_REG_MAX, -}; - -static const struct regmap_config s2mps14_rtc_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = S2MPS_RTC_REG_MAX, -}; - #ifdef CONFIG_OF /* * Only the common platform data elements for s5m8767 are parsed here from the @@ -264,8 +249,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev); - const struct regmap_config *regmap, *regmap_rtc; + const struct regmap_config *regmap; struct sec_pmic_dev *sec_pmic; + unsigned long device_type; int ret; sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev), @@ -277,7 +263,7 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_pmic->dev = &i2c->dev; sec_pmic->i2c = i2c; sec_pmic->irq = i2c->irq; - sec_pmic->type = sec_i2c_get_driver_data(i2c, id); + device_type = sec_i2c_get_driver_data(i2c, id); if (sec_pmic->dev->of_node) { pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev); @@ -285,7 +271,7 @@ static int sec_pmic_probe(struct i2c_client *i2c, ret = PTR_ERR(pdata); return ret; } - pdata->device_type = sec_pmic->type; + pdata->device_type = device_type; } if (pdata) { sec_pmic->device_type = pdata->device_type; @@ -298,39 +284,21 @@ static int sec_pmic_probe(struct i2c_client *i2c, switch (sec_pmic->device_type) { case S2MPA01: regmap = &s2mpa01_regmap_config; - /* - * The rtc-s5m driver does not support S2MPA01 and there - * is no mfd_cell for S2MPA01 RTC device. - * However we must pass something to devm_regmap_init_i2c() - * so use S5M-like regmap config even though it wouldn't work. - */ - regmap_rtc = &s5m_rtc_regmap_config; break; case S2MPS11X: regmap = &s2mps11_regmap_config; - /* - * The rtc-s5m driver does not support S2MPS11 and there - * is no mfd_cell for S2MPS11 RTC device. - * However we must pass something to devm_regmap_init_i2c() - * so use S5M-like regmap config even though it wouldn't work. - */ - regmap_rtc = &s5m_rtc_regmap_config; break; case S2MPS14X: regmap = &s2mps14_regmap_config; - regmap_rtc = &s2mps14_rtc_regmap_config; break; case S5M8763X: regmap = &s5m8763_regmap_config; - regmap_rtc = &s5m_rtc_regmap_config; break; case S5M8767X: regmap = &s5m8767_regmap_config; - regmap_rtc = &s5m_rtc_regmap_config; break; default: regmap = &sec_regmap_config; - regmap_rtc = &s5m_rtc_regmap_config; break; } @@ -342,21 +310,6 @@ static int sec_pmic_probe(struct i2c_client *i2c, return ret; } - sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); - if (!sec_pmic->rtc) { - dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n"); - return -ENODEV; - } - i2c_set_clientdata(sec_pmic->rtc, sec_pmic); - - sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc); - if (IS_ERR(sec_pmic->regmap_rtc)) { - ret = PTR_ERR(sec_pmic->regmap_rtc); - dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n", - ret); - goto err_regmap_rtc; - } - if (pdata && pdata->cfg_pmic_irq) pdata->cfg_pmic_irq(); @@ -403,8 +356,6 @@ static int sec_pmic_probe(struct i2c_client *i2c, err_mfd: sec_irq_exit(sec_pmic); -err_regmap_rtc: - i2c_unregister_device(sec_pmic->rtc); return ret; } @@ -414,7 +365,6 @@ static int sec_pmic_remove(struct i2c_client *i2c) mfd_remove_devices(sec_pmic->dev); sec_irq_exit(sec_pmic); - i2c_unregister_device(sec_pmic->rtc); return 0; } @@ -424,19 +374,18 @@ static int sec_pmic_suspend(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev)) enable_irq_wake(sec_pmic->irq); - /* - * PMIC IRQ must be disabled during suspend for RTC alarm - * to work properly. - * When device is woken up from suspend by RTC Alarm, an - * interrupt occurs before resuming I2C bus controller. - * The interrupt is handled by regmap_irq_thread which tries - * to read RTC registers. This read fails (I2C is still - * suspended) and RTC Alarm interrupt is disabled. - */ - disable_irq(sec_pmic->irq); - } + /* + * PMIC IRQ must be disabled during suspend for RTC alarm + * to work properly. + * When device is woken up from suspend, an + * interrupt occurs before resuming I2C bus controller. + * The interrupt is handled by regmap_irq_thread which tries + * to read RTC registers. This read fails (I2C is still + * suspended) and RTC Alarm interrupt is disabled. + */ + disable_irq(sec_pmic->irq); return 0; } @@ -446,10 +395,9 @@ static int sec_pmic_resume(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev)) disable_irq_wake(sec_pmic->irq); - enable_irq(sec_pmic->irq); - } + enable_irq(sec_pmic->irq); return 0; } diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index 64e7913aadc6..654e2c1dbf7a 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -385,7 +385,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) &sec_pmic->irq_data); break; default: - dev_err(sec_pmic->dev, "Unknown device type %d\n", + dev_err(sec_pmic->dev, "Unknown device type %lu\n", sec_pmic->device_type); return -EINVAL; } diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index e7dc441a8f8a..81e6d0932bf0 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1726,7 +1726,7 @@ static struct pci_driver sm501_pci_driver = { MODULE_ALIAS("platform:sm501"); -static struct of_device_id of_sm501_match_tbl[] = { +static const struct of_device_id of_sm501_match_tbl[] = { { .compatible = "smi,sm501", }, { /* end */ } }; diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index 0da02e11d58e..a45f9c0a330a 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/types.h> +#include <linux/of_device.h> #include "stmpe.h" static int i2c_reg_read(struct stmpe *stmpe, u8 reg) @@ -52,15 +53,41 @@ static struct stmpe_client_info i2c_ci = { .write_block = i2c_block_write, }; +static const struct of_device_id stmpe_of_match[] = { + { .compatible = "st,stmpe610", .data = (void *)STMPE610, }, + { .compatible = "st,stmpe801", .data = (void *)STMPE801, }, + { .compatible = "st,stmpe811", .data = (void *)STMPE811, }, + { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, }, + { .compatible = "st,stmpe1801", .data = (void *)STMPE1801, }, + { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, }, + { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, }, + {}, +}; +MODULE_DEVICE_TABLE(of, stmpe_of_match); + static int stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + int partnum; + const struct of_device_id *of_id; + i2c_ci.data = (void *)id; i2c_ci.irq = i2c->irq; i2c_ci.client = i2c; i2c_ci.dev = &i2c->dev; - return stmpe_probe(&i2c_ci, id->driver_data); + of_id = of_match_device(stmpe_of_match, &i2c->dev); + if (!of_id) { + /* + * This happens when the I2C ID matches the node name + * but no real compatible string has been given. + */ + dev_info(&i2c->dev, "matching on node name, compatible is preferred\n"); + partnum = id->driver_data; + } else + partnum = (int)of_id->data; + + return stmpe_probe(&i2c_ci, partnum); } static int stmpe_i2c_remove(struct i2c_client *i2c) @@ -89,6 +116,7 @@ static struct i2c_driver stmpe_i2c_driver = { #ifdef CONFIG_PM .pm = &stmpe_dev_pm_ops, #endif + .of_match_table = stmpe_of_match, }, .probe = stmpe_i2c_probe, .remove = stmpe_i2c_remove, diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 4a91f6771fb8..3b6bfa7184ad 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -20,6 +20,7 @@ #include <linux/slab.h> #include <linux/mfd/core.h> #include <linux/delay.h> +#include <linux/regulator/consumer.h> #include "stmpe.h" static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) @@ -605,9 +606,18 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, if (blocks & STMPE_BLOCK_GPIO) mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; + else + mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO; if (blocks & STMPE_BLOCK_KEYPAD) mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; + else + mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC; + + if (blocks & STMPE_BLOCK_PWM) + mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM; + else + mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM; return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask, enable ? mask : 0); @@ -986,9 +996,6 @@ static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np) int base = 0; int num_irqs = stmpe->variant->num_irqs; - if (!np) - base = stmpe->irq_base; - stmpe->domain = irq_domain_add_simple(np, num_irqs, base, &stmpe_irq_ops, stmpe); if (!stmpe->domain) { @@ -1067,7 +1074,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell) { return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, - NULL, stmpe->irq_base, stmpe->domain); + NULL, 0, stmpe->domain); } static int stmpe_devices_init(struct stmpe *stmpe) @@ -1171,12 +1178,23 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum) stmpe->dev = ci->dev; stmpe->client = ci->client; stmpe->pdata = pdata; - stmpe->irq_base = pdata->irq_base; stmpe->ci = ci; stmpe->partnum = partnum; stmpe->variant = stmpe_variant_info[partnum]; stmpe->regs = stmpe->variant->regs; stmpe->num_gpios = stmpe->variant->num_gpios; + stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc"); + if (!IS_ERR(stmpe->vcc)) { + ret = regulator_enable(stmpe->vcc); + if (ret) + dev_warn(ci->dev, "failed to enable VCC supply\n"); + } + stmpe->vio = devm_regulator_get_optional(ci->dev, "vio"); + if (!IS_ERR(stmpe->vio)) { + ret = regulator_enable(stmpe->vio); + if (ret) + dev_warn(ci->dev, "failed to enable VIO supply\n"); + } dev_set_drvdata(stmpe->dev, stmpe); if (ci->init) @@ -1243,6 +1261,11 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum) int stmpe_remove(struct stmpe *stmpe) { + if (!IS_ERR(stmpe->vio)) + regulator_disable(stmpe->vio); + if (!IS_ERR(stmpe->vcc)) + regulator_disable(stmpe->vcc); + mfd_remove_devices(stmpe->dev); return 0; diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 6639f1b0fef5..9e4d21d37a11 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -192,7 +192,7 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3) #define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1) -#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0) +#define STMPE1601_SYS_CTRL_ENABLE_SPWM (1 << 0) /* The 1601/2403 share the same masks */ #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7) diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c new file mode 100644 index 000000000000..718fc4d2adc0 --- /dev/null +++ b/drivers/mfd/sun6i-prcm.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * Allwinner PRCM (Power/Reset/Clock Management) driver + * + */ + +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of.h> + +struct prcm_data { + int nsubdevs; + const struct mfd_cell *subdevs; +}; + +static const struct resource sun6i_a31_ar100_clk_res[] = { + { + .start = 0x0, + .end = 0x3, + .flags = IORESOURCE_MEM, + }, +}; + +static const struct resource sun6i_a31_apb0_clk_res[] = { + { + .start = 0xc, + .end = 0xf, + .flags = IORESOURCE_MEM, + }, +}; + +static const struct resource sun6i_a31_apb0_gates_clk_res[] = { + { + .start = 0x28, + .end = 0x2b, + .flags = IORESOURCE_MEM, + }, +}; + +static const struct resource sun6i_a31_apb0_rstc_res[] = { + { + .start = 0xb0, + .end = 0xb3, + .flags = IORESOURCE_MEM, + }, +}; + +static const struct mfd_cell sun6i_a31_prcm_subdevs[] = { + { + .name = "sun6i-a31-ar100-clk", + .of_compatible = "allwinner,sun6i-a31-ar100-clk", + .num_resources = ARRAY_SIZE(sun6i_a31_ar100_clk_res), + .resources = sun6i_a31_ar100_clk_res, + }, + { + .name = "sun6i-a31-apb0-clk", + .of_compatible = "allwinner,sun6i-a31-apb0-clk", + .num_resources = ARRAY_SIZE(sun6i_a31_apb0_clk_res), + .resources = sun6i_a31_apb0_clk_res, + }, + { + .name = "sun6i-a31-apb0-gates-clk", + .of_compatible = "allwinner,sun6i-a31-apb0-gates-clk", + .num_resources = ARRAY_SIZE(sun6i_a31_apb0_gates_clk_res), + .resources = sun6i_a31_apb0_gates_clk_res, + }, + { + .name = "sun6i-a31-apb0-clock-reset", + .of_compatible = "allwinner,sun6i-a31-clock-reset", + .num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res), + .resources = sun6i_a31_apb0_rstc_res, + }, +}; + +static const struct prcm_data sun6i_a31_prcm_data = { + .nsubdevs = ARRAY_SIZE(sun6i_a31_prcm_subdevs), + .subdevs = sun6i_a31_prcm_subdevs, +}; + +static const struct of_device_id sun6i_prcm_dt_ids[] = { + { + .compatible = "allwinner,sun6i-a31-prcm", + .data = &sun6i_a31_prcm_data, + }, + { /* sentinel */ }, +}; + +static int sun6i_prcm_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const struct prcm_data *data; + struct resource *res; + int ret; + + match = of_match_node(sun6i_prcm_dt_ids, np); + if (!match) + return -EINVAL; + + data = match->data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no prcm memory region provided\n"); + return -ENOENT; + } + + ret = mfd_add_devices(&pdev->dev, 0, data->subdevs, data->nsubdevs, + res, -1, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to add subdevices\n"); + return ret; + } + + return 0; +} + +static struct platform_driver sun6i_prcm_driver = { + .driver = { + .name = "sun6i-prcm", + .owner = THIS_MODULE, + .of_match_table = sun6i_prcm_dt_ids, + }, + .probe = sun6i_prcm_probe, +}; +module_platform_driver(sun6i_prcm_driver); + +MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner sun6i PRCM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index e2a04bb8bc1e..ca15878ce5c0 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -95,7 +95,11 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np, struct device_node *syscon_np; struct regmap *regmap; - syscon_np = of_parse_phandle(np, property, 0); + if (property) + syscon_np = of_parse_phandle(np, property, 0); + else + syscon_np = np; + if (!syscon_np) return ERR_PTR(-ENODEV); diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index 3b27482a174f..a2e1990c9de7 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -119,7 +119,7 @@ static const struct i2c_device_id tps6507x_i2c_id[] = { MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id); #ifdef CONFIG_OF -static struct of_device_id tps6507x_of_match[] = { +static const struct of_device_id tps6507x_of_match[] = { {.compatible = "ti,tps6507x", }, {}, }; diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index a74bfb59f18f..0d256cb002eb 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -197,6 +197,7 @@ static struct regmap_irq_chip tps65218_irq_chip = { static const struct of_device_id of_tps65218_match_table[] = { { .compatible = "ti,tps65218", }, + {} }; static int tps65218_probe(struct i2c_client *client, diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 835e5549ecdd..8e1dbc469580 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -444,7 +444,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien return pdata; } -static struct of_device_id tps6586x_of_match[] = { +static const struct of_device_id tps6586x_of_match[] = { { .compatible = "ti,tps6586x", }, { }, }; diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 460a014ca629..f9e42ea1cb1a 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -379,7 +379,7 @@ err_sleep_init: } #ifdef CONFIG_OF -static struct of_device_id tps65910_of_match[] = { +static const struct of_device_id tps65910_of_match[] = { { .compatible = "ti,tps65910", .data = (void *)TPS65910}, { .compatible = "ti,tps65911", .data = (void *)TPS65911}, { }, diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c index 6e88f25832fb..ae26d84b3a59 100644 --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -87,8 +87,13 @@ static struct reg_default twl6040_defaults[] = { }; static struct reg_default twl6040_patch[] = { - /* Select I2C bus access to dual access registers */ - { TWL6040_REG_ACCCTL, 0x09 }, + /* + * Select I2C bus access to dual access registers + * Interrupt register is cleared on read + * Select fast mode for i2c (400KHz) + */ + { TWL6040_REG_ACCCTL, + TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) }, }; @@ -286,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on) if (twl6040->power_count++) goto out; + clk_prepare_enable(twl6040->clk32k); + /* Allow writes to the chip */ regcache_cache_only(twl6040->regmap, false); @@ -341,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on) twl6040->sysclk = 0; twl6040->mclk = 0; + + clk_disable_unprepare(twl6040->clk32k); } out: @@ -432,12 +441,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, TWL6040_HPLLENA; break; case 19200000: - /* - * PLL disabled - * (enable PLL if MCLK jitter quality - * doesn't meet specification) - */ - hppllctl |= TWL6040_MCLK_19200KHZ; + /* PLL enabled, bypass mode */ + hppllctl |= TWL6040_MCLK_19200KHZ | + TWL6040_HPLLBP | TWL6040_HPLLENA; break; case 26000000: /* PLL enabled, active mode */ @@ -445,9 +451,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, TWL6040_HPLLENA; break; case 38400000: - /* PLL enabled, active mode */ + /* PLL enabled, bypass mode */ hppllctl |= TWL6040_MCLK_38400KHZ | - TWL6040_HPLLENA; + TWL6040_HPLLBP | TWL6040_HPLLENA; break; default: dev_err(twl6040->dev, @@ -639,6 +645,12 @@ static int twl6040_probe(struct i2c_client *client, i2c_set_clientdata(client, twl6040); + twl6040->clk32k = devm_clk_get(&client->dev, "clk32k"); + if (IS_ERR(twl6040->clk32k)) { + dev_info(&client->dev, "clk32k is not handled\n"); + twl6040->clk32k = NULL; + } + twl6040->supplies[0].supply = "vio"; twl6040->supplies[1].supply = "v2v1"; ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES, @@ -660,6 +672,9 @@ static int twl6040_probe(struct i2c_client *client, mutex_init(&twl6040->mutex); init_completion(&twl6040->ready); + regmap_register_patch(twl6040->regmap, twl6040_patch, + ARRAY_SIZE(twl6040_patch)); + twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV); if (twl6040->rev < 0) { dev_err(&client->dev, "Failed to read revision register: %d\n", @@ -679,6 +694,9 @@ static int twl6040_probe(struct i2c_client *client, GPIOF_OUT_INIT_LOW, "audpwron"); if (ret) goto gpio_err; + + /* Clear any pending interrupt */ + twl6040_reg_read(twl6040, TWL6040_REG_INTID); } ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT, @@ -707,10 +725,6 @@ static int twl6040_probe(struct i2c_client *client, goto readyirq_err; } - /* dual-access registers controlled by I2C only */ - regmap_register_patch(twl6040->regmap, twl6040_patch, - ARRAY_SIZE(twl6040_patch)); - /* * The main functionality of twl6040 to provide audio on OMAP4+ systems. * We can add the ASoC codec child whenever this driver has been loaded. diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 070f8cfbbd7a..c8a993bd17ae 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -333,7 +333,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */ { 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */ { 0x00000210, 0x00D4 }, /* R528 - LDO1 Control 1 */ - { 0x00000212, 0x0001 }, /* R530 - LDO1 Control 2 */ + { 0x00000212, 0x0000 }, /* R530 - LDO1 Control 2 */ { 0x00000213, 0x0344 }, /* R531 - LDO2 Control 1 */ { 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */ { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ @@ -1037,6 +1037,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4: case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5: case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6: + case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7: + case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8: case ARIZONA_COMFORT_NOISE_GENERATOR: case ARIZONA_HAPTICS_CONTROL_1: case ARIZONA_HAPTICS_CONTROL_2: diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 1942b6f231da..41a7f6fb7802 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -468,10 +468,12 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */ { 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */ { 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */ - { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */ - { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */ - { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */ - { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */ + { 0x00000066, 0x01FF }, /* R102 - Always On Triggers Sequence Select 1 */ + { 0x00000067, 0x01FF }, /* R103 - Always On Triggers Sequence Select 2 */ + { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */ + { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */ + { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */ + { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */ { 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */ { 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */ { 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */ @@ -549,6 +551,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */ { 0x000002A9, 0x300A }, /* R681 - Mic Detect Level 4 */ { 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */ + { 0x000002CB, 0x0000 }, /* R715 - Isolation control */ { 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */ { 0x00000300, 0x0000 }, /* R768 - Input Enables */ { 0x00000308, 0x0000 }, /* R776 - Input Rate */ @@ -1498,6 +1501,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2: case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3: case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4: + case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5: + case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6: case ARIZONA_COMFORT_NOISE_GENERATOR: case ARIZONA_HAPTICS_CONTROL_1: case ARIZONA_HAPTICS_CONTROL_2: @@ -1580,6 +1585,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_DETECT_LEVEL_3: case ARIZONA_MIC_DETECT_LEVEL_4: case ARIZONA_MIC_NOISE_MIX_CONTROL_1: + case ARIZONA_ISOLATION_CONTROL: case ARIZONA_JACK_DETECT_ANALOGUE: case ARIZONA_INPUT_ENABLES: case ARIZONA_INPUT_ENABLES_STATUS: diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index e5eae751aa1b..c6fb5d16ca09 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -64,7 +64,7 @@ EXPORT_SYMBOL_GPL(wm8400_block_read); static int wm8400_register_codec(struct wm8400 *wm8400) { - struct mfd_cell cell = { + const struct mfd_cell cell = { .name = "wm8400-codec", .platform_data = wm8400, .pdata_size = sizeof(*wm8400), diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c index 5aa807687777..c7a81da64ee1 100644 --- a/drivers/mfd/wm8997-tables.c +++ b/drivers/mfd/wm8997-tables.c @@ -174,10 +174,10 @@ static const struct reg_default wm8997_reg_default[] = { { 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */ { 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */ { 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */ - { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */ - { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */ - { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */ - { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */ + { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */ + { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */ + { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */ + { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */ { 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */ { 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */ { 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */ @@ -814,10 +814,10 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4: - case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1: - case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2: case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3: case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4: + case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5: + case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6: case ARIZONA_COMFORT_NOISE_GENERATOR: case ARIZONA_HAPTICS_CONTROL_1: case ARIZONA_HAPTICS_CONTROL_2: @@ -846,6 +846,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_RATE_ESTIMATOR_3: case ARIZONA_RATE_ESTIMATOR_4: case ARIZONA_RATE_ESTIMATOR_5: + case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1: case ARIZONA_FLL1_CONTROL_1: case ARIZONA_FLL1_CONTROL_2: case ARIZONA_FLL1_CONTROL_3: @@ -880,6 +881,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_GPIO_CLOCK: case ARIZONA_MIC_CHARGE_PUMP_1: case ARIZONA_LDO1_CONTROL_1: + case ARIZONA_LDO1_CONTROL_2: case ARIZONA_LDO2_CONTROL_1: case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 8aaf8c1f3f63..b675882307e4 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -694,3 +694,10 @@ config MMC_REALTEK_PCI help Say Y here to include driver code to support SD/MMC card interface of Realtek PCI-E card reader + +config MMC_REALTEK_USB + tristate "Realtek USB SD/MMC Card Interface Driver" + depends on MFD_RTSX_USB + help + Say Y here to include driver code to support SD/MMC card interface + of Realtek RTS5129/39 series card reader diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 0c8aa5e1e304..3eb48b656f25 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o +obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c new file mode 100644 index 000000000000..e11fafa6fc6b --- /dev/null +++ b/drivers/mmc/host/rtsx_usb_sdmmc.c @@ -0,0 +1,1455 @@ +/* Realtek USB SD/MMC Card Interface driver + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Roger Tseng <rogerable@realtek.com> + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/card.h> +#include <linux/scatterlist.h> +#include <linux/pm_runtime.h> + +#include <linux/mfd/rtsx_usb.h> +#include <asm/unaligned.h> + +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) +#include <linux/leds.h> +#include <linux/workqueue.h> +#define RTSX_USB_USE_LEDS_CLASS +#endif + +struct rtsx_usb_sdmmc { + struct platform_device *pdev; + struct rtsx_ucr *ucr; + struct mmc_host *mmc; + struct mmc_request *mrq; + + struct mutex host_mutex; + + u8 ssc_depth; + unsigned int clock; + bool vpclk; + bool double_clk; + bool host_removal; + bool card_exist; + bool initial_mode; + bool ddr_mode; + + unsigned char power_mode; + +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) + struct led_classdev led; + char led_name[32]; + struct work_struct led_work; +#endif +}; + +static inline struct device *sdmmc_dev(struct rtsx_usb_sdmmc *host) +{ + return &(host->pdev->dev); +} + +static inline void sd_clear_error(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + rtsx_usb_ep0_write_register(ucr, CARD_STOP, + SD_STOP | SD_CLR_ERR, + SD_STOP | SD_CLR_ERR); + + rtsx_usb_clear_dma_err(ucr); + rtsx_usb_clear_fsm_err(ucr); +} + +#ifdef DEBUG +static void sd_print_debug_regs(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + u8 val = 0; + + rtsx_usb_ep0_read_register(ucr, SD_STAT1, &val); + dev_dbg(sdmmc_dev(host), "SD_STAT1: 0x%x\n", val); + rtsx_usb_ep0_read_register(ucr, SD_STAT2, &val); + dev_dbg(sdmmc_dev(host), "SD_STAT2: 0x%x\n", val); + rtsx_usb_ep0_read_register(ucr, SD_BUS_STAT, &val); + dev_dbg(sdmmc_dev(host), "SD_BUS_STAT: 0x%x\n", val); +} +#else +#define sd_print_debug_regs(host) +#endif /* DEBUG */ + +static int sd_read_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd, + u16 byte_cnt, u8 *buf, int buf_len, int timeout) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + u8 trans_mode; + + if (!buf) + buf_len = 0; + + rtsx_usb_init_cmd(ucr); + if (cmd != NULL) { + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__ + , cmd->opcode); + if (cmd->opcode == MMC_SEND_TUNING_BLOCK) + trans_mode = SD_TM_AUTO_TUNING; + else + trans_mode = SD_TM_NORMAL_READ; + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD1, 0xFF, (u8)(cmd->arg >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD2, 0xFF, (u8)(cmd->arg >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD3, 0xFF, (u8)(cmd->arg >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD4, 0xFF, (u8)cmd->arg); + } else { + trans_mode = SD_TM_AUTO_READ_3; + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, + 0xFF, (u8)(byte_cnt >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, + SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6); + if (trans_mode != SD_TM_AUTO_TUNING) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, + 0xFF, trans_mode | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + if (cmd != NULL) { + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0); + } + + err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_send_cmd failed (err = %d)\n", err); + return err; + } + + err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout); + if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) { + sd_print_debug_regs(host); + + if (!err) { + dev_dbg(sdmmc_dev(host), + "Transfer failed (SD_TRANSFER = %02x)\n", + ucr->rsp_buf[0]); + err = -EIO; + } else { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_get_rsp failed (err = %d)\n", err); + } + + return err; + } + + if (cmd != NULL) { + cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + + if (buf && buf_len) { + /* 2-byte aligned part */ + err = rtsx_usb_read_ppbuf(ucr, buf, byte_cnt - (byte_cnt % 2)); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_read_ppbuf failed (err = %d)\n", err); + return err; + } + + /* unaligned byte */ + if (byte_cnt % 2) + return rtsx_usb_read_register(ucr, + PPBUF_BASE2 + byte_cnt, + buf + byte_cnt - 1); + } + + return 0; +} + +static int sd_write_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd, + u16 byte_cnt, u8 *buf, int buf_len, int timeout) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + u8 trans_mode; + + if (!buf) + buf_len = 0; + + if (buf && buf_len) { + err = rtsx_usb_write_ppbuf(ucr, buf, buf_len); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_write_ppbuf failed (err = %d)\n", + err); + return err; + } + } + + trans_mode = (cmd != NULL) ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3; + rtsx_usb_init_cmd(ucr); + + if (cmd != NULL) { + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__, + cmd->opcode); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD1, 0xFF, (u8)(cmd->arg >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD2, 0xFF, (u8)(cmd->arg >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD3, 0xFF, (u8)(cmd->arg >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CMD4, 0xFF, (u8)cmd->arg); + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, + 0xFF, (u8)(byte_cnt >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, + SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF, + trans_mode | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + if (cmd != NULL) { + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0); + } + + err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_send_cmd failed (err = %d)\n", err); + return err; + } + + err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout); + if (err) { + sd_print_debug_regs(host); + dev_dbg(sdmmc_dev(host), + "rtsx_usb_get_rsp failed (err = %d)\n", err); + return err; + } + + if (cmd != NULL) { + cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + + return 0; +} + +static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host, + struct mmc_command *cmd) +{ + struct rtsx_ucr *ucr = host->ucr; + u8 cmd_idx = (u8)cmd->opcode; + u32 arg = cmd->arg; + int err = 0; + int timeout = 100; + int i; + u8 *ptr; + int stat_idx = 0; + int len = 2; + u8 rsp_type; + + dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n", + __func__, cmd_idx, arg); + + /* Response type: + * R0 + * R1, R5, R6, R7 + * R1b + * R2 + * R3, R4 + */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + rsp_type = SD_RSP_TYPE_R0; + break; + case MMC_RSP_R1: + rsp_type = SD_RSP_TYPE_R1; + break; + case MMC_RSP_R1 & ~MMC_RSP_CRC: + rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7; + break; + case MMC_RSP_R1B: + rsp_type = SD_RSP_TYPE_R1b; + break; + case MMC_RSP_R2: + rsp_type = SD_RSP_TYPE_R2; + break; + case MMC_RSP_R3: + rsp_type = SD_RSP_TYPE_R3; + break; + default: + dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n"); + err = -EINVAL; + goto out; + } + + if (rsp_type == SD_RSP_TYPE_R1b) + timeout = 3000; + + if (cmd->opcode == SD_SWITCH_VOLTAGE) { + err = rtsx_usb_write_register(ucr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, + SD_CLK_TOGGLE_EN); + if (err) + goto out; + } + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, PINGPONG_BUFFER); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, + 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END | SD_STAT_IDLE, + SD_TRANSFER_END | SD_STAT_IDLE); + + if (rsp_type == SD_RSP_TYPE_R2) { + /* Read data from ping-pong buffer */ + for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 16; + } else if (rsp_type != SD_RSP_TYPE_R0) { + /* Read data from SD_CMDx registers */ + for (i = SD_CMD0; i <= SD_CMD4; i++) + rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0); + stat_idx = 5; + } + len += stat_idx; + + rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_STAT1, 0, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_CR, 100); + if (err) { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_send_cmd error (err = %d)\n", err); + goto out; + } + + err = rtsx_usb_get_rsp(ucr, len, timeout); + if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) { + sd_print_debug_regs(host); + sd_clear_error(host); + + if (!err) { + dev_dbg(sdmmc_dev(host), + "Transfer failed (SD_TRANSFER = %02x)\n", + ucr->rsp_buf[0]); + err = -EIO; + } else { + dev_dbg(sdmmc_dev(host), + "rtsx_usb_get_rsp failed (err = %d)\n", err); + } + + goto out; + } + + if (rsp_type == SD_RSP_TYPE_R0) { + err = 0; + goto out; + } + + /* Skip result of CHECK_REG_CMD */ + ptr = ucr->rsp_buf + 1; + + /* Check (Start,Transmission) bit of Response */ + if ((ptr[0] & 0xC0) != 0) { + err = -EILSEQ; + dev_dbg(sdmmc_dev(host), "Invalid response bit\n"); + goto out; + } + + /* Check CRC7 */ + if (!(rsp_type & SD_NO_CHECK_CRC7)) { + if (ptr[stat_idx] & SD_CRC7_ERR) { + err = -EILSEQ; + dev_dbg(sdmmc_dev(host), "CRC7 error\n"); + goto out; + } + } + + if (rsp_type == SD_RSP_TYPE_R2) { + for (i = 0; i < 4; i++) { + cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4); + dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n", + i, cmd->resp[i]); + } + } else { + cmd->resp[0] = get_unaligned_be32(ptr + 1); + dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n", + cmd->resp[0]); + } + +out: + cmd->error = err; +} + +static int sd_rw_multi(struct rtsx_usb_sdmmc *host, struct mmc_request *mrq) +{ + struct rtsx_ucr *ucr = host->ucr; + struct mmc_data *data = mrq->data; + int read = (data->flags & MMC_DATA_READ) ? 1 : 0; + u8 cfg2, trans_mode; + int err; + u8 flag; + size_t data_len = data->blksz * data->blocks; + unsigned int pipe; + + if (read) { + dev_dbg(sdmmc_dev(host), "%s: read %zu bytes\n", + __func__, data_len); + cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0; + trans_mode = SD_TM_AUTO_READ_3; + } else { + dev_dbg(sdmmc_dev(host), "%s: write %zu bytes\n", + __func__, data_len); + cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 | + SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0; + trans_mode = SD_TM_AUTO_WRITE_3; + } + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, + 0xFF, (u8)data->blocks); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, + 0xFF, (u8)(data->blocks >> 8)); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE, + 0x01, RING_BUFFER); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3, + 0xFF, (u8)(data_len >> 24)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2, + 0xFF, (u8)(data_len >> 16)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1, + 0xFF, (u8)(data_len >> 8)); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0, + 0xFF, (u8)data_len); + if (read) { + flag = MODE_CDIR; + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL, + 0x03 | DMA_PACK_SIZE_MASK, + DMA_DIR_FROM_CARD | DMA_EN | DMA_512); + } else { + flag = MODE_CDOR; + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL, + 0x03 | DMA_PACK_SIZE_MASK, + DMA_DIR_TO_CARD | DMA_EN | DMA_512); + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF, + trans_mode | SD_TRANSFER_START); + rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER, + SD_TRANSFER_END, SD_TRANSFER_END); + + err = rtsx_usb_send_cmd(ucr, flag, 100); + if (err) + return err; + + if (read) + pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN); + else + pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT); + + err = rtsx_usb_transfer_data(ucr, pipe, data->sg, data_len, + data->sg_len, NULL, 10000); + if (err) { + dev_dbg(sdmmc_dev(host), "rtsx_usb_transfer_data error %d\n" + , err); + sd_clear_error(host); + return err; + } + + return rtsx_usb_get_rsp(ucr, 1, 2000); +} + +static inline void sd_enable_initial_mode(struct rtsx_usb_sdmmc *host) +{ + rtsx_usb_write_register(host->ucr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128); +} + +static inline void sd_disable_initial_mode(struct rtsx_usb_sdmmc *host) +{ + rtsx_usb_write_register(host->ucr, SD_CFG1, + SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0); +} + +static void sd_normal_rw(struct rtsx_usb_sdmmc *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + u8 *buf; + + buf = kzalloc(data->blksz, GFP_NOIO); + if (!buf) { + cmd->error = -ENOMEM; + return; + } + + if (data->flags & MMC_DATA_READ) { + if (host->initial_mode) + sd_disable_initial_mode(host); + + cmd->error = sd_read_data(host, cmd, (u16)data->blksz, buf, + data->blksz, 200); + + if (host->initial_mode) + sd_enable_initial_mode(host); + + sg_copy_from_buffer(data->sg, data->sg_len, buf, data->blksz); + } else { + sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz); + + cmd->error = sd_write_data(host, cmd, (u16)data->blksz, buf, + data->blksz, 200); + } + + kfree(buf); +} + +static int sd_change_phase(struct rtsx_usb_sdmmc *host, u8 sample_point, int tx) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(sdmmc_dev(host), "%s: %s sample_point = %d\n", + __func__, tx ? "TX" : "RX", sample_point); + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE); + + if (tx) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, + 0x0F, sample_point); + else + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK1_CTL, + 0x0F, sample_point); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, + PHASE_NOT_RESET, PHASE_NOT_RESET); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_RST, 0); + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err) + return err; + + return 0; +} + +static inline u32 get_phase_point(u32 phase_map, unsigned int idx) +{ + idx &= MAX_PHASE; + return phase_map & (1 << idx); +} + +static int get_phase_len(u32 phase_map, unsigned int idx) +{ + int i; + + for (i = 0; i < MAX_PHASE + 1; i++) { + if (get_phase_point(phase_map, idx + i) == 0) + return i; + } + return MAX_PHASE + 1; +} + +static u8 sd_search_final_phase(struct rtsx_usb_sdmmc *host, u32 phase_map) +{ + int start = 0, len = 0; + int start_final = 0, len_final = 0; + u8 final_phase = 0xFF; + + if (phase_map == 0) { + dev_dbg(sdmmc_dev(host), "Phase: [map:%x]\n", phase_map); + return final_phase; + } + + while (start < MAX_PHASE + 1) { + len = get_phase_len(phase_map, start); + if (len_final < len) { + start_final = start; + len_final = len; + } + start += len ? len : 1; + } + + final_phase = (start_final + len_final / 2) & MAX_PHASE; + dev_dbg(sdmmc_dev(host), "Phase: [map:%x] [maxlen:%d] [final:%d]\n", + phase_map, len_final, final_phase); + + return final_phase; +} + +static void sd_wait_data_idle(struct rtsx_usb_sdmmc *host) +{ + int err, i; + u8 val = 0; + + for (i = 0; i < 100; i++) { + err = rtsx_usb_ep0_read_register(host->ucr, + SD_DATA_STATE, &val); + if (val & SD_DATA_IDLE) + return; + + usleep_range(100, 1000); + } +} + +static int sd_tuning_rx_cmd(struct rtsx_usb_sdmmc *host, + u8 opcode, u8 sample_point) +{ + int err; + struct mmc_command cmd = {0}; + + err = sd_change_phase(host, sample_point, 0); + if (err) + return err; + + cmd.opcode = MMC_SEND_TUNING_BLOCK; + err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100); + if (err) { + /* Wait till SD DATA IDLE */ + sd_wait_data_idle(host); + sd_clear_error(host); + return err; + } + + return 0; +} + +static void sd_tuning_phase(struct rtsx_usb_sdmmc *host, + u8 opcode, u16 *phase_map) +{ + int err, i; + u16 raw_phase_map = 0; + + for (i = MAX_PHASE; i >= 0; i--) { + err = sd_tuning_rx_cmd(host, opcode, (u8)i); + if (!err) + raw_phase_map |= 1 << i; + } + + if (phase_map) + *phase_map = raw_phase_map; +} + +static int sd_tuning_rx(struct rtsx_usb_sdmmc *host, u8 opcode) +{ + int err, i; + u16 raw_phase_map[RX_TUNING_CNT] = {0}, phase_map; + u8 final_phase; + + /* setting fixed default TX phase */ + err = sd_change_phase(host, 0x01, 1); + if (err) { + dev_dbg(sdmmc_dev(host), "TX phase setting failed\n"); + return err; + } + + /* tuning RX phase */ + for (i = 0; i < RX_TUNING_CNT; i++) { + sd_tuning_phase(host, opcode, &(raw_phase_map[i])); + + if (raw_phase_map[i] == 0) + break; + } + + phase_map = 0xFFFF; + for (i = 0; i < RX_TUNING_CNT; i++) { + dev_dbg(sdmmc_dev(host), "RX raw_phase_map[%d] = 0x%04x\n", + i, raw_phase_map[i]); + phase_map &= raw_phase_map[i]; + } + dev_dbg(sdmmc_dev(host), "RX phase_map = 0x%04x\n", phase_map); + + if (phase_map) { + final_phase = sd_search_final_phase(host, phase_map); + if (final_phase == 0xFF) + return -EINVAL; + + err = sd_change_phase(host, final_phase, 0); + if (err) + return err; + } else { + return -EINVAL; + } + + return 0; +} + +static int sdmmc_get_ro(struct mmc_host *mmc) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err; + u16 val; + + if (host->host_removal) + return -ENOMEDIUM; + + mutex_lock(&ucr->dev_mutex); + + /* Check SD card detect */ + err = rtsx_usb_get_card_status(ucr, &val); + + mutex_unlock(&ucr->dev_mutex); + + + /* Treat failed detection as non-ro */ + if (err) + return 0; + + if (val & SD_WP) + return 1; + + return 0; +} + +static int sdmmc_get_cd(struct mmc_host *mmc) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err; + u16 val; + + if (host->host_removal) + return -ENOMEDIUM; + + mutex_lock(&ucr->dev_mutex); + + /* Check SD card detect */ + err = rtsx_usb_get_card_status(ucr, &val); + + mutex_unlock(&ucr->dev_mutex); + + /* Treat failed detection as non-exist */ + if (err) + goto no_card; + + if (val & SD_CD) { + host->card_exist = true; + return 1; + } + +no_card: + host->card_exist = false; + return 0; +} + +static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned int data_size = 0; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + + if (host->host_removal) { + cmd->error = -ENOMEDIUM; + goto finish; + } + + if ((!host->card_exist)) { + cmd->error = -ENOMEDIUM; + goto finish_detect_card; + } + + /* + * Reject SDIO CMDs to speed up card identification + * since unsupported + */ + if (cmd->opcode == SD_IO_SEND_OP_COND || + cmd->opcode == SD_IO_RW_DIRECT || + cmd->opcode == SD_IO_RW_EXTENDED) { + cmd->error = -EINVAL; + goto finish; + } + + mutex_lock(&ucr->dev_mutex); + + mutex_lock(&host->host_mutex); + host->mrq = mrq; + mutex_unlock(&host->host_mutex); + + if (mrq->data) + data_size = data->blocks * data->blksz; + + if (!data_size) { + sd_send_cmd_get_rsp(host, cmd); + } else if ((!(data_size % 512) && cmd->opcode != MMC_SEND_EXT_CSD) || + mmc_op_multi(cmd->opcode)) { + sd_send_cmd_get_rsp(host, cmd); + + if (!cmd->error) { + sd_rw_multi(host, mrq); + + if (mmc_op_multi(cmd->opcode) && mrq->stop) { + sd_send_cmd_get_rsp(host, mrq->stop); + rtsx_usb_write_register(ucr, MC_FIFO_CTL, + FIFO_FLUSH, FIFO_FLUSH); + } + } + } else { + sd_normal_rw(host, mrq); + } + + if (mrq->data) { + if (cmd->error || data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blocks * data->blksz; + } + + mutex_unlock(&ucr->dev_mutex); + +finish_detect_card: + if (cmd->error) { + /* + * detect card when fail to update card existence state and + * speed up card removal when retry + */ + sdmmc_get_cd(mmc); + dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error); + } + +finish: + mutex_lock(&host->host_mutex); + host->mrq = NULL; + mutex_unlock(&host->host_mutex); + + mmc_request_done(mmc, mrq); +} + +static int sd_set_bus_width(struct rtsx_usb_sdmmc *host, + unsigned char bus_width) +{ + int err = 0; + u8 width[] = { + [MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT, + [MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT, + [MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT, + }; + + if (bus_width <= MMC_BUS_WIDTH_8) + err = rtsx_usb_write_register(host->ucr, SD_CFG1, + 0x03, width[bus_width]); + + return err; +} + +static int sd_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xAA); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0xAA); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA9); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr) +{ + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xA5); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x9A); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA5); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x9A); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x65); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x5A); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_power_on(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE, + CARD_SHARE_MASK, CARD_SHARE_SD); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, + SD_CLK_EN, SD_CLK_EN); + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err) + return err; + + if (CHECK_PKG(ucr, LQFP48)) + err = sd_pull_ctl_enable_lqfp48(ucr); + else + err = sd_pull_ctl_enable_qfn24(ucr); + if (err) + return err; + + err = rtsx_usb_write_register(ucr, CARD_PWR_CTL, + POWER_MASK, PARTIAL_POWER_ON); + if (err) + return err; + + usleep_range(800, 1000); + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK|LDO3318_PWR_MASK, POWER_ON|LDO_ON); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, + SD_OUTPUT_EN, SD_OUTPUT_EN); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +static int sd_power_off(struct rtsx_usb_sdmmc *host) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, SD_OUTPUT_EN, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK, POWER_OFF); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + POWER_MASK|LDO3318_PWR_MASK, POWER_OFF|LDO_SUSPEND); + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (err) + return err; + + if (CHECK_PKG(ucr, LQFP48)) + return sd_pull_ctl_disable_lqfp48(ucr); + return sd_pull_ctl_disable_qfn24(ucr); +} + +static int sd_set_power_mode(struct rtsx_usb_sdmmc *host, + unsigned char power_mode) +{ + int err; + + if (power_mode != MMC_POWER_OFF) + power_mode = MMC_POWER_ON; + + if (power_mode == host->power_mode) + return 0; + + if (power_mode == MMC_POWER_OFF) { + err = sd_power_off(host); + pm_runtime_put(sdmmc_dev(host)); + } else { + pm_runtime_get_sync(sdmmc_dev(host)); + err = sd_power_on(host); + } + + if (!err) + host->power_mode = power_mode; + + return err; +} + +static int sd_set_timing(struct rtsx_usb_sdmmc *host, + unsigned char timing, bool *ddr_mode) +{ + struct rtsx_ucr *ucr = host->ucr; + int err; + + *ddr_mode = false; + + rtsx_usb_init_cmd(ucr); + + switch (timing) { + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_SDR50: + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, + 0x0C | SD_ASYNC_FIFO_RST, + SD_30_MODE | SD_ASYNC_FIFO_RST); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); + break; + + case MMC_TIMING_UHS_DDR50: + *ddr_mode = true; + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, + 0x0C | SD_ASYNC_FIFO_RST, + SD_DDR_MODE | SD_ASYNC_FIFO_RST); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL, + DDR_VAR_TX_CMD_DAT, DDR_VAR_TX_CMD_DAT); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + DDR_VAR_RX_DAT | DDR_VAR_RX_CMD, + DDR_VAR_RX_DAT | DDR_VAR_RX_CMD); + break; + + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, + 0x0C, SD_20_MODE); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL, + SD20_TX_SEL_MASK, SD20_TX_14_AHEAD); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + SD20_RX_SEL_MASK, SD20_RX_14_DELAY); + break; + + default: + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_CFG1, 0x0C, SD_20_MODE); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF, + CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + SD_PUSH_POINT_CTL, 0xFF, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL, + SD20_RX_SEL_MASK, SD20_RX_POS_EDGE); + break; + } + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + + return err; +} + +static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + mutex_lock(&ucr->dev_mutex); + + if (rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD)) { + mutex_unlock(&ucr->dev_mutex); + return; + } + + sd_set_power_mode(host, ios->power_mode); + sd_set_bus_width(host, ios->bus_width); + sd_set_timing(host, ios->timing, &host->ddr_mode); + + host->vpclk = false; + host->double_clk = true; + + switch (ios->timing) { + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_UHS_SDR50: + host->ssc_depth = SSC_DEPTH_2M; + host->vpclk = true; + host->double_clk = false; + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_UHS_SDR25: + host->ssc_depth = SSC_DEPTH_1M; + break; + default: + host->ssc_depth = SSC_DEPTH_512K; + break; + } + + host->initial_mode = (ios->clock <= 1000000) ? true : false; + host->clock = ios->clock; + + rtsx_usb_switch_clock(host->ucr, host->clock, host->ssc_depth, + host->initial_mode, host->double_clk, host->vpclk); + + mutex_unlock(&ucr->dev_mutex); + dev_dbg(sdmmc_dev(host), "%s end\n", __func__); +} + +static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err = 0; + + dev_dbg(sdmmc_dev(host), "%s: signal_voltage = %d\n", + __func__, ios->signal_voltage); + + if (host->host_removal) + return -ENOMEDIUM; + + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_120) + return -EPERM; + + mutex_lock(&ucr->dev_mutex); + + err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD); + if (err) { + mutex_unlock(&ucr->dev_mutex); + return err; + } + + /* Let mmc core do the busy checking, simply stop the forced-toggle + * clock(while issuing CMD11) and switch voltage. + */ + rtsx_usb_init_cmd(ucr); + + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL, + SD_IO_USING_1V8, SD_IO_USING_3V3); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, + TUNE_SD18_MASK, TUNE_SD18_3V3); + } else { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, + SD_CLK_FORCE_STOP); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL, + SD_IO_USING_1V8, SD_IO_USING_1V8); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, + TUNE_SD18_MASK, TUNE_SD18_1V8); + } + + err = rtsx_usb_send_cmd(ucr, MODE_C, 100); + mutex_unlock(&ucr->dev_mutex); + + return err; +} + +static int sdmmc_card_busy(struct mmc_host *mmc) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err; + u8 stat; + u8 mask = SD_DAT3_STATUS | SD_DAT2_STATUS | SD_DAT1_STATUS + | SD_DAT0_STATUS; + + dev_dbg(sdmmc_dev(host), "%s\n", __func__); + + mutex_lock(&ucr->dev_mutex); + + err = rtsx_usb_write_register(ucr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, + SD_CLK_TOGGLE_EN); + if (err) + goto out; + + mdelay(1); + + err = rtsx_usb_read_register(ucr, SD_BUS_STAT, &stat); + if (err) + goto out; + + err = rtsx_usb_write_register(ucr, SD_BUS_STAT, + SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0); +out: + mutex_unlock(&ucr->dev_mutex); + + if (err) + return err; + + /* check if any pin between dat[0:3] is low */ + if ((stat & mask) != mask) + return 1; + else + return 0; +} + +static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct rtsx_usb_sdmmc *host = mmc_priv(mmc); + struct rtsx_ucr *ucr = host->ucr; + int err = 0; + + if (host->host_removal) + return -ENOMEDIUM; + + mutex_lock(&ucr->dev_mutex); + + if (!host->ddr_mode) + err = sd_tuning_rx(host, MMC_SEND_TUNING_BLOCK); + + mutex_unlock(&ucr->dev_mutex); + + return err; +} + +static const struct mmc_host_ops rtsx_usb_sdmmc_ops = { + .request = sdmmc_request, + .set_ios = sdmmc_set_ios, + .get_ro = sdmmc_get_ro, + .get_cd = sdmmc_get_cd, + .start_signal_voltage_switch = sdmmc_switch_voltage, + .card_busy = sdmmc_card_busy, + .execute_tuning = sdmmc_execute_tuning, +}; + +#ifdef RTSX_USB_USE_LEDS_CLASS +static void rtsx_usb_led_control(struct led_classdev *led, + enum led_brightness brightness) +{ + struct rtsx_usb_sdmmc *host = container_of(led, + struct rtsx_usb_sdmmc, led); + + if (host->host_removal) + return; + + host->led.brightness = brightness; + schedule_work(&host->led_work); +} + +static void rtsx_usb_update_led(struct work_struct *work) +{ + struct rtsx_usb_sdmmc *host = + container_of(work, struct rtsx_usb_sdmmc, led_work); + struct rtsx_ucr *ucr = host->ucr; + + mutex_lock(&ucr->dev_mutex); + + if (host->led.brightness == LED_OFF) + rtsx_usb_turn_off_led(ucr); + else + rtsx_usb_turn_on_led(ucr); + + mutex_unlock(&ucr->dev_mutex); +} +#endif + +static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host) +{ + struct mmc_host *mmc = host->mmc; + + mmc->f_min = 250000; + mmc->f_max = 208000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST | + MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 | + MMC_CAP_NEEDS_POLL; + + mmc->max_current_330 = 400; + mmc->max_current_180 = 800; + mmc->ops = &rtsx_usb_sdmmc_ops; + mmc->max_segs = 256; + mmc->max_seg_size = 65536; + mmc->max_blk_size = 512; + mmc->max_blk_count = 65535; + mmc->max_req_size = 524288; + + host->power_mode = MMC_POWER_OFF; +} + +static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct rtsx_usb_sdmmc *host; + struct rtsx_ucr *ucr; +#ifdef RTSX_USB_USE_LEDS_CLASS + int err; +#endif + + ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent)); + if (!ucr) + return -ENXIO; + + dev_dbg(&(pdev->dev), ": Realtek USB SD/MMC controller found\n"); + + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->ucr = ucr; + host->mmc = mmc; + host->pdev = pdev; + platform_set_drvdata(pdev, host); + + mutex_init(&host->host_mutex); + rtsx_usb_init_host(host); + pm_runtime_enable(&pdev->dev); + +#ifdef RTSX_USB_USE_LEDS_CLASS + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; + host->led.brightness = LED_OFF; + host->led.default_trigger = mmc_hostname(mmc); + host->led.brightness_set = rtsx_usb_led_control; + + err = led_classdev_register(mmc_dev(mmc), &host->led); + if (err) + dev_err(&(pdev->dev), + "Failed to register LED device: %d\n", err); + INIT_WORK(&host->led_work, rtsx_usb_update_led); + +#endif + mmc_add_host(mmc); + + return 0; +} + +static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev) +{ + struct rtsx_usb_sdmmc *host = platform_get_drvdata(pdev); + struct mmc_host *mmc; + + if (!host) + return 0; + + mmc = host->mmc; + host->host_removal = true; + + mutex_lock(&host->host_mutex); + if (host->mrq) { + dev_dbg(&(pdev->dev), + "%s: Controller removed during transfer\n", + mmc_hostname(mmc)); + host->mrq->cmd->error = -ENOMEDIUM; + if (host->mrq->stop) + host->mrq->stop->error = -ENOMEDIUM; + mmc_request_done(mmc, host->mrq); + } + mutex_unlock(&host->host_mutex); + + mmc_remove_host(mmc); + +#ifdef RTSX_USB_USE_LEDS_CLASS + cancel_work_sync(&host->led_work); + led_classdev_unregister(&host->led); +#endif + + mmc_free_host(mmc); + pm_runtime_disable(&pdev->dev); + platform_set_drvdata(pdev, NULL); + + dev_dbg(&(pdev->dev), + ": Realtek USB SD/MMC module has been removed\n"); + + return 0; +} + +static struct platform_device_id rtsx_usb_sdmmc_ids[] = { + { + .name = "rtsx_usb_sdmmc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, rtsx_usb_sdmmc_ids); + +static struct platform_driver rtsx_usb_sdmmc_driver = { + .probe = rtsx_usb_sdmmc_drv_probe, + .remove = rtsx_usb_sdmmc_drv_remove, + .id_table = rtsx_usb_sdmmc_ids, + .driver = { + .owner = THIS_MODULE, + .name = "rtsx_usb_sdmmc", + }, +}; +module_platform_driver(rtsx_usb_sdmmc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>"); +MODULE_DESCRIPTION("Realtek USB SD/MMC Card Host Driver"); diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c index 476af93543f6..8ec2d6a1dbe1 100644 --- a/drivers/rtc/rtc-s5m.c +++ b/drivers/rtc/rtc-s5m.c @@ -40,6 +40,7 @@ struct s5m_rtc_info { struct device *dev; + struct i2c_client *i2c; struct sec_pmic_dev *s5m87xx; struct regmap *regmap; struct rtc_device *rtc_dev; @@ -49,6 +50,20 @@ struct s5m_rtc_info { bool wtsr_smpl; }; +static const struct regmap_config s5m_rtc_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SEC_RTC_REG_MAX, +}; + +static const struct regmap_config s2mps14_rtc_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS_RTC_REG_MAX, +}; + static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm, int rtc_24hr_mode) { @@ -554,6 +569,7 @@ static int s5m_rtc_probe(struct platform_device *pdev) struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent); struct sec_platform_data *pdata = s5m87xx->pdata; struct s5m_rtc_info *info; + const struct regmap_config *regmap_cfg; int ret; if (!pdata) { @@ -565,9 +581,37 @@ static int s5m_rtc_probe(struct platform_device *pdev) if (!info) return -ENOMEM; + switch (pdata->device_type) { + case S2MPS14X: + regmap_cfg = &s2mps14_rtc_regmap_config; + break; + case S5M8763X: + regmap_cfg = &s5m_rtc_regmap_config; + break; + case S5M8767X: + regmap_cfg = &s5m_rtc_regmap_config; + break; + default: + dev_err(&pdev->dev, "Device type is not supported by RTC driver\n"); + return -ENODEV; + } + + info->i2c = i2c_new_dummy(s5m87xx->i2c->adapter, RTC_I2C_ADDR); + if (!info->i2c) { + dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n"); + return -ENODEV; + } + + info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg); + if (IS_ERR(info->regmap)) { + ret = PTR_ERR(info->regmap); + dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n", + ret); + goto err; + } + info->dev = &pdev->dev; info->s5m87xx = s5m87xx; - info->regmap = s5m87xx->regmap_rtc; info->device_type = s5m87xx->device_type; info->wtsr_smpl = s5m87xx->wtsr_smpl; @@ -585,7 +629,7 @@ static int s5m_rtc_probe(struct platform_device *pdev) default: ret = -EINVAL; dev_err(&pdev->dev, "Unsupported device type: %d\n", ret); - return ret; + goto err; } platform_set_drvdata(pdev, info); @@ -602,15 +646,24 @@ static int s5m_rtc_probe(struct platform_device *pdev) info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc", &s5m_rtc_ops, THIS_MODULE); - if (IS_ERR(info->rtc_dev)) - return PTR_ERR(info->rtc_dev); + if (IS_ERR(info->rtc_dev)) { + ret = PTR_ERR(info->rtc_dev); + goto err; + } ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, s5m_rtc_alarm_irq, 0, "rtc-alarm0", info); - if (ret < 0) + if (ret < 0) { dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", info->irq, ret); + goto err; + } + + return 0; + +err: + i2c_unregister_device(info->i2c); return ret; } @@ -639,6 +692,17 @@ static void s5m_rtc_shutdown(struct platform_device *pdev) s5m_rtc_enable_smpl(info, false); } +static int s5m_rtc_remove(struct platform_device *pdev) +{ + struct s5m_rtc_info *info = platform_get_drvdata(pdev); + + /* Perform also all shutdown steps when removing */ + s5m_rtc_shutdown(pdev); + i2c_unregister_device(info->i2c); + + return 0; +} + #ifdef CONFIG_PM_SLEEP static int s5m_rtc_resume(struct device *dev) { @@ -676,6 +740,7 @@ static struct platform_driver s5m_rtc_driver = { .pm = &s5m_rtc_pm_ops, }, .probe = s5m_rtc_probe, + .remove = s5m_rtc_remove, .shutdown = s5m_rtc_shutdown, .id_table = s5m_rtc_id, }; diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 3301b2031c8d..552cc1d61cc7 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -330,7 +330,6 @@ int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank, int abx500_get_chip_id(struct device *dev); int abx500_event_registers_startup_state_get(struct device *dev, u8 *event); int abx500_startup_irq_enabled(struct device *dev, unsigned int irq); -void abx500_dump_all_banks(void); struct abx500_ops { int (*get_chip_id) (struct device *); diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 7b35c21170d5..7204d8138b24 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -42,12 +42,14 @@ #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2 0x62 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3 0x63 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4 0x64 -#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x68 -#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x69 -#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x6A -#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x6B -#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6C -#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6D +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x66 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x67 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x68 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x69 +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6A +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6B +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7 0x6C +#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8 0x6D #define ARIZONA_COMFORT_NOISE_GENERATOR 0x70 #define ARIZONA_HAPTICS_CONTROL_1 0x90 #define ARIZONA_HAPTICS_CONTROL_2 0x91 diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h new file mode 100644 index 000000000000..d0e31a2287ac --- /dev/null +++ b/include/linux/mfd/axp20x.h @@ -0,0 +1,180 @@ +/* + * Functions and registers to access AXP20X power management chip. + * + * Copyright (C) 2013, Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MFD_AXP20X_H +#define __LINUX_MFD_AXP20X_H + +enum { + AXP202_ID = 0, + AXP209_ID, +}; + +#define AXP20X_DATACACHE(m) (0x04 + (m)) + +/* Power supply */ +#define AXP20X_PWR_INPUT_STATUS 0x00 +#define AXP20X_PWR_OP_MODE 0x01 +#define AXP20X_USB_OTG_STATUS 0x02 +#define AXP20X_PWR_OUT_CTRL 0x12 +#define AXP20X_DCDC2_V_OUT 0x23 +#define AXP20X_DCDC2_LDO3_V_SCAL 0x25 +#define AXP20X_DCDC3_V_OUT 0x27 +#define AXP20X_LDO24_V_OUT 0x28 +#define AXP20X_LDO3_V_OUT 0x29 +#define AXP20X_VBUS_IPSOUT_MGMT 0x30 +#define AXP20X_V_OFF 0x31 +#define AXP20X_OFF_CTRL 0x32 +#define AXP20X_CHRG_CTRL1 0x33 +#define AXP20X_CHRG_CTRL2 0x34 +#define AXP20X_CHRG_BAK_CTRL 0x35 +#define AXP20X_PEK_KEY 0x36 +#define AXP20X_DCDC_FREQ 0x37 +#define AXP20X_V_LTF_CHRG 0x38 +#define AXP20X_V_HTF_CHRG 0x39 +#define AXP20X_APS_WARN_L1 0x3a +#define AXP20X_APS_WARN_L2 0x3b +#define AXP20X_V_LTF_DISCHRG 0x3c +#define AXP20X_V_HTF_DISCHRG 0x3d + +/* Interrupt */ +#define AXP20X_IRQ1_EN 0x40 +#define AXP20X_IRQ2_EN 0x41 +#define AXP20X_IRQ3_EN 0x42 +#define AXP20X_IRQ4_EN 0x43 +#define AXP20X_IRQ5_EN 0x44 +#define AXP20X_IRQ1_STATE 0x48 +#define AXP20X_IRQ2_STATE 0x49 +#define AXP20X_IRQ3_STATE 0x4a +#define AXP20X_IRQ4_STATE 0x4b +#define AXP20X_IRQ5_STATE 0x4c + +/* ADC */ +#define AXP20X_ACIN_V_ADC_H 0x56 +#define AXP20X_ACIN_V_ADC_L 0x57 +#define AXP20X_ACIN_I_ADC_H 0x58 +#define AXP20X_ACIN_I_ADC_L 0x59 +#define AXP20X_VBUS_V_ADC_H 0x5a +#define AXP20X_VBUS_V_ADC_L 0x5b +#define AXP20X_VBUS_I_ADC_H 0x5c +#define AXP20X_VBUS_I_ADC_L 0x5d +#define AXP20X_TEMP_ADC_H 0x5e +#define AXP20X_TEMP_ADC_L 0x5f +#define AXP20X_TS_IN_H 0x62 +#define AXP20X_TS_IN_L 0x63 +#define AXP20X_GPIO0_V_ADC_H 0x64 +#define AXP20X_GPIO0_V_ADC_L 0x65 +#define AXP20X_GPIO1_V_ADC_H 0x66 +#define AXP20X_GPIO1_V_ADC_L 0x67 +#define AXP20X_PWR_BATT_H 0x70 +#define AXP20X_PWR_BATT_M 0x71 +#define AXP20X_PWR_BATT_L 0x72 +#define AXP20X_BATT_V_H 0x78 +#define AXP20X_BATT_V_L 0x79 +#define AXP20X_BATT_CHRG_I_H 0x7a +#define AXP20X_BATT_CHRG_I_L 0x7b +#define AXP20X_BATT_DISCHRG_I_H 0x7c +#define AXP20X_BATT_DISCHRG_I_L 0x7d +#define AXP20X_IPSOUT_V_HIGH_H 0x7e +#define AXP20X_IPSOUT_V_HIGH_L 0x7f + +/* Power supply */ +#define AXP20X_DCDC_MODE 0x80 +#define AXP20X_ADC_EN1 0x82 +#define AXP20X_ADC_EN2 0x83 +#define AXP20X_ADC_RATE 0x84 +#define AXP20X_GPIO10_IN_RANGE 0x85 +#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86 +#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87 +#define AXP20X_TIMER_CTRL 0x8a +#define AXP20X_VBUS_MON 0x8b +#define AXP20X_OVER_TMP 0x8f + +/* GPIO */ +#define AXP20X_GPIO0_CTRL 0x90 +#define AXP20X_LDO5_V_OUT 0x91 +#define AXP20X_GPIO1_CTRL 0x92 +#define AXP20X_GPIO2_CTRL 0x93 +#define AXP20X_GPIO20_SS 0x94 +#define AXP20X_GPIO3_CTRL 0x95 + +/* Battery */ +#define AXP20X_CHRG_CC_31_24 0xb0 +#define AXP20X_CHRG_CC_23_16 0xb1 +#define AXP20X_CHRG_CC_15_8 0xb2 +#define AXP20X_CHRG_CC_7_0 0xb3 +#define AXP20X_DISCHRG_CC_31_24 0xb4 +#define AXP20X_DISCHRG_CC_23_16 0xb5 +#define AXP20X_DISCHRG_CC_15_8 0xb6 +#define AXP20X_DISCHRG_CC_7_0 0xb7 +#define AXP20X_CC_CTRL 0xb8 +#define AXP20X_FG_RES 0xb9 + +/* Regulators IDs */ +enum { + AXP20X_LDO1 = 0, + AXP20X_LDO2, + AXP20X_LDO3, + AXP20X_LDO4, + AXP20X_LDO5, + AXP20X_DCDC2, + AXP20X_DCDC3, + AXP20X_REG_ID_MAX, +}; + +/* IRQs */ +enum { + AXP20X_IRQ_ACIN_OVER_V = 1, + AXP20X_IRQ_ACIN_PLUGIN, + AXP20X_IRQ_ACIN_REMOVAL, + AXP20X_IRQ_VBUS_OVER_V, + AXP20X_IRQ_VBUS_PLUGIN, + AXP20X_IRQ_VBUS_REMOVAL, + AXP20X_IRQ_VBUS_V_LOW, + AXP20X_IRQ_BATT_PLUGIN, + AXP20X_IRQ_BATT_REMOVAL, + AXP20X_IRQ_BATT_ENT_ACT_MODE, + AXP20X_IRQ_BATT_EXIT_ACT_MODE, + AXP20X_IRQ_CHARG, + AXP20X_IRQ_CHARG_DONE, + AXP20X_IRQ_BATT_TEMP_HIGH, + AXP20X_IRQ_BATT_TEMP_LOW, + AXP20X_IRQ_DIE_TEMP_HIGH, + AXP20X_IRQ_CHARG_I_LOW, + AXP20X_IRQ_DCDC1_V_LONG, + AXP20X_IRQ_DCDC2_V_LONG, + AXP20X_IRQ_DCDC3_V_LONG, + AXP20X_IRQ_PEK_SHORT = 22, + AXP20X_IRQ_PEK_LONG, + AXP20X_IRQ_N_OE_PWR_ON, + AXP20X_IRQ_N_OE_PWR_OFF, + AXP20X_IRQ_VBUS_VALID, + AXP20X_IRQ_VBUS_NOT_VALID, + AXP20X_IRQ_VBUS_SESS_VALID, + AXP20X_IRQ_VBUS_SESS_END, + AXP20X_IRQ_LOW_PWR_LVL1, + AXP20X_IRQ_LOW_PWR_LVL2, + AXP20X_IRQ_TIMER, + AXP20X_IRQ_PEK_RIS_EDGE, + AXP20X_IRQ_PEK_FAL_EDGE, + AXP20X_IRQ_GPIO3_INPUT, + AXP20X_IRQ_GPIO2_INPUT, + AXP20X_IRQ_GPIO1_INPUT, + AXP20X_IRQ_GPIO0_INPUT, +}; + +struct axp20x_dev { + struct device *dev; + struct i2c_client *i2c_client; + struct regmap *regmap; + struct regmap_irq_chip_data *regmap_irqc; + long variant; +}; + +#endif /* __LINUX_MFD_AXP20X_H */ diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 032af7fc5b2e..887ef4f7bef7 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -29,8 +29,8 @@ enum { EC_MSG_RX_PROTO_BYTES = 3, /* Max length of messages */ - EC_MSG_BYTES = EC_HOST_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES, - + EC_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + + EC_MSG_TX_PROTO_BYTES, }; /** diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 86fd06953bcd..7853a6410d14 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -24,25 +24,12 @@ #define __CROS_EC_COMMANDS_H /* - * Protocol overview + * Current version of this protocol * - * request: CMD [ P0 P1 P2 ... Pn S ] - * response: ERR [ P0 P1 P2 ... Pn S ] - * - * where the bytes are defined as follow : - * - CMD is the command code. (defined by EC_CMD_ constants) - * - ERR is the error code. (defined by EC_RES_ constants) - * - Px is the optional payload. - * it is not sent if the error code is not success. - * (defined by ec_params_ and ec_response_ structures) - * - S is the checksum which is the sum of all payload bytes. - * - * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD - * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM. - * On I2C, all bytes are sent serially in the same message. + * TODO(crosbug.com/p/11223): This is effectively useless; protocol is + * determined in other ways. Remove this once the kernel code no longer + * depends on it. */ - -/* Current version of this protocol */ #define EC_PROTO_VERSION 0x00000002 /* Command version mask */ @@ -57,13 +44,19 @@ #define EC_LPC_ADDR_HOST_CMD 0x204 /* I/O addresses for host command args and params */ -#define EC_LPC_ADDR_HOST_ARGS 0x800 -#define EC_LPC_ADDR_HOST_PARAM 0x804 -#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ - -/* I/O addresses for host command params, old interface */ -#define EC_LPC_ADDR_OLD_PARAM 0x880 -#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */ +/* Protocol version 2 */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ +#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is + * EC_PROTO2_MAX_PARAM_SIZE */ +/* Protocol version 3 */ +#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ +#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ + +/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff + * and they tell the kernel that so we have to think of it as two parts. */ +#define EC_HOST_CMD_REGION0 0x800 +#define EC_HOST_CMD_REGION1 0x880 +#define EC_HOST_CMD_REGION_SIZE 0x80 /* EC command register bit functions */ #define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ @@ -79,18 +72,22 @@ #define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ /* The offset address of each type of data in mapped memory. */ -#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */ -#define EC_MEMMAP_FAN 0x10 /* Fan speeds */ -#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */ -#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ +#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ #define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ #define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ #define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ #define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ #define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ -#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */ -#define EC_MEMMAP_SWITCHES 0x30 -#define EC_MEMMAP_HOST_EVENTS 0x34 +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ +/* Unused 0x28 - 0x2f */ +#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ +/* Unused 0x31 - 0x33 */ +#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */ +/* Reserve 0x38 - 0x3f for additional host event-related stuff */ +/* Battery values are all 32 bits */ #define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ #define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ #define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ @@ -99,10 +96,24 @@ #define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ #define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ #define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ #define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ #define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ #define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ #define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ +#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ +/* Unused 0x84 - 0x8f */ +#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ +/* Unused 0x91 */ +#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */ +#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ +/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */ + + +/* Define the format of the accelerometer mapped memory status byte. */ +#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f +#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4) +#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7) /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ #define EC_TEMP_SENSOR_ENTRIES 16 @@ -112,6 +123,8 @@ * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. */ #define EC_TEMP_SENSOR_B_ENTRIES 8 + +/* Special values for mapped temperature sensors */ #define EC_TEMP_SENSOR_NOT_PRESENT 0xff #define EC_TEMP_SENSOR_ERROR 0xfe #define EC_TEMP_SENSOR_NOT_POWERED 0xfd @@ -122,6 +135,18 @@ */ #define EC_TEMP_SENSOR_OFFSET 200 +/* + * Number of ALS readings at EC_MEMMAP_ALS + */ +#define EC_ALS_ENTRIES 2 + +/* + * The default value a temperature sensor will return when it is present but + * has not been read this boot. This is a reasonable number to avoid + * triggering alarms on the host. + */ +#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) + #define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ #define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ #define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ @@ -137,8 +162,8 @@ #define EC_SWITCH_LID_OPEN 0x01 #define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 #define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 -/* Recovery requested via keyboard */ -#define EC_SWITCH_KEYBOARD_RECOVERY 0x08 +/* Was recovery requested via keyboard; now unused. */ +#define EC_SWITCH_IGNORE1 0x08 /* Recovery requested via dedicated signal (from servo board) */ #define EC_SWITCH_DEDICATED_RECOVERY 0x10 /* Was fake developer mode switch; now unused. Remove in next refactor. */ @@ -147,10 +172,15 @@ /* Host command interface flags */ /* Host command interface supports LPC args (LPC interface only) */ #define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 +/* Host command interface supports version 3 protocol */ +#define EC_HOST_CMD_FLAG_VERSION_3 0x02 /* Wireless switch flags */ -#define EC_WIRELESS_SWITCH_WLAN 0x01 -#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 +#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ +#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ /* * This header file is used in coreboot both in C and ACPI code. The ACPI code @@ -159,6 +189,14 @@ */ #ifndef __ACPI__ +/* + * Define __packed if someone hasn't beat us to it. Linux kernel style + * checking prefers __packed over __attribute__((packed)). + */ +#ifndef __packed +#define __packed __attribute__((packed)) +#endif + /* LPC command status byte masks */ /* EC has written a byte in the data register and host hasn't read it yet */ #define EC_LPC_STATUS_TO_HOST 0x01 @@ -198,6 +236,9 @@ enum ec_status { EC_RES_UNAVAILABLE = 9, /* No response available */ EC_RES_TIMEOUT = 10, /* We got a timeout */ EC_RES_OVERFLOW = 11, /* Table / data overflow */ + EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ + EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ + EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ }; /* @@ -235,6 +276,16 @@ enum host_event_code { /* Shutdown due to battery level too low */ EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, + /* Suggest that the AP throttle itself */ + EC_HOST_EVENT_THROTTLE_START = 18, + /* Suggest that the AP resume normal speed */ + EC_HOST_EVENT_THROTTLE_STOP = 19, + + /* Hang detect logic detected a hang and host event timeout expired */ + EC_HOST_EVENT_HANG_DETECT = 20, + /* Hang detect logic detected a hang and warm rebooted the AP */ + EC_HOST_EVENT_HANG_REBOOT = 21, + /* * The high bit of the event mask is not used as a host event code. If * it reads back as set, then the entire event mask should be @@ -279,6 +330,188 @@ struct ec_lpc_host_args { */ #define EC_HOST_ARGS_FLAG_TO_HOST 0x02 +/*****************************************************************************/ +/* + * Byte codes returned by EC over SPI interface. + * + * These can be used by the AP to debug the EC interface, and to determine + * when the EC is not in a state where it will ever get around to responding + * to the AP. + * + * Example of sequence of bytes read from EC for a current good transfer: + * 1. - - AP asserts chip select (CS#) + * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request + * 3. - - EC starts handling CS# interrupt + * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request + * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in + * bytes looking for EC_SPI_FRAME_START + * 6. - - EC finishes processing and sets up response + * 7. EC_SPI_FRAME_START - AP reads frame byte + * 8. (response packet) - AP reads response packet + * 9. EC_SPI_PAST_END - Any additional bytes read by AP + * 10 - - AP deasserts chip select + * 11 - - EC processes CS# interrupt and sets up DMA for + * next request + * + * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than + * the following byte values: + * EC_SPI_OLD_READY + * EC_SPI_RX_READY + * EC_SPI_RECEIVING + * EC_SPI_PROCESSING + * + * Then the EC found an error in the request, or was not ready for the request + * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, + * because the EC is unable to tell when the AP is done sending its request. + */ + +/* + * Framing byte which precedes a response packet from the EC. After sending a + * request, the AP will clock in bytes until it sees the framing byte, then + * clock in the response packet. + */ +#define EC_SPI_FRAME_START 0xec + +/* + * Padding bytes which are clocked out after the end of a response packet. + */ +#define EC_SPI_PAST_END 0xed + +/* + * EC is ready to receive, and has ignored the byte sent by the AP. EC expects + * that the AP will send a valid packet header (starting with + * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. + */ +#define EC_SPI_RX_READY 0xf8 + +/* + * EC has started receiving the request from the AP, but hasn't started + * processing it yet. + */ +#define EC_SPI_RECEIVING 0xf9 + +/* EC has received the entire request from the AP and is processing it. */ +#define EC_SPI_PROCESSING 0xfa + +/* + * EC received bad data from the AP, such as a packet header with an invalid + * length. EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_RX_BAD_DATA 0xfb + +/* + * EC received data from the AP before it was ready. That is, the AP asserted + * chip select and started clocking data before the EC was ready to receive it. + * EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_NOT_READY 0xfc + +/* + * EC was ready to receive a request from the AP. EC has treated the byte sent + * by the AP as part of a request packet, or (for old-style ECs) is processing + * a fully received packet but is not ready to respond yet. + */ +#define EC_SPI_OLD_READY 0xfd + +/*****************************************************************************/ + +/* + * Protocol version 2 for I2C and SPI send a request this way: + * + * 0 EC_CMD_VERSION0 + (command version) + * 1 Command number + * 2 Length of params = N + * 3..N+2 Params, if any + * N+3 8-bit checksum of bytes 0..N+2 + * + * The corresponding response is: + * + * 0 Result code (EC_RES_*) + * 1 Length of params = M + * 2..M+1 Params, if any + * M+2 8-bit checksum of bytes 0..M+1 + */ +#define EC_PROTO2_REQUEST_HEADER_BYTES 3 +#define EC_PROTO2_REQUEST_TRAILER_BYTES 1 +#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ + EC_PROTO2_REQUEST_TRAILER_BYTES) + +#define EC_PROTO2_RESPONSE_HEADER_BYTES 2 +#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 +#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ + EC_PROTO2_RESPONSE_TRAILER_BYTES) + +/* Parameter length was limited by the LPC interface */ +#define EC_PROTO2_MAX_PARAM_SIZE 0xfc + +/* Maximum request and response packet sizes for protocol version 2 */ +#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) +#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) + +/*****************************************************************************/ + +/* + * Value written to legacy command port / prefix byte to indicate protocol + * 3+ structs are being used. Usage is bus-dependent. + */ +#define EC_COMMAND_PROTOCOL_3 0xda + +#define EC_HOST_REQUEST_VERSION 3 + +/* Version 3 request from host */ +struct ec_host_request { + /* Struct version (=3) + * + * EC will return EC_RES_INVALID_HEADER if it receives a header with a + * version it doesn't know how to parse. + */ + uint8_t struct_version; + + /* + * Checksum of request and data; sum of all bytes including checksum + * should total to 0. + */ + uint8_t checksum; + + /* Command code */ + uint16_t command; + + /* Command version */ + uint8_t command_version; + + /* Unused byte in current protocol version; set to 0 */ + uint8_t reserved; + + /* Length of data which follows this header */ + uint16_t data_len; +} __packed; + +#define EC_HOST_RESPONSE_VERSION 3 + +/* Version 3 response from EC */ +struct ec_host_response { + /* Struct version (=3) */ + uint8_t struct_version; + + /* + * Checksum of response and data; sum of all bytes including checksum + * should total to 0. + */ + uint8_t checksum; + + /* Result code (EC_RES_*) */ + uint16_t result; + + /* Length of data which follows this header */ + uint16_t data_len; + + /* Unused bytes in current protocol version; set to 0 */ + uint16_t reserved; +} __packed; + +/*****************************************************************************/ /* * Notes on commands: * @@ -418,6 +651,68 @@ struct ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ } __packed; +/* Fake a variety of responses, purely for testing purposes. */ +#define EC_CMD_TEST_PROTOCOL 0x0a + +/* Tell the EC what to send back to us. */ +struct ec_params_test_protocol { + uint32_t ec_result; + uint32_t ret_len; + uint8_t buf[32]; +} __packed; + +/* Here it comes... */ +struct ec_response_test_protocol { + uint8_t buf[32]; +} __packed; + +/* Get prococol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x0b + +/* Flags for ec_response_get_protocol_info.flags */ +/* EC_RES_IN_PROGRESS may be returned if a command is slow */ +#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) + +struct ec_response_get_protocol_info { + /* Fields which exist if at least protocol version 3 supported */ + + /* Bitmask of protocol versions supported (1 << n means version n)*/ + uint32_t protocol_versions; + + /* Maximum request packet size, in bytes */ + uint16_t max_request_packet_size; + + /* Maximum response packet size, in bytes */ + uint16_t max_response_packet_size; + + /* Flags; see EC_PROTOCOL_INFO_* */ + uint32_t flags; +} __packed; + + +/*****************************************************************************/ +/* Get/Set miscellaneous values */ + +/* The upper byte of .flags tells what to do (nothing means "get") */ +#define EC_GSV_SET 0x80000000 + +/* The lower three bytes of .flags identifies the parameter, if that has + meaning for an individual command. */ +#define EC_GSV_PARAM_MASK 0x00ffffff + +struct ec_params_get_set_value { + uint32_t flags; + uint32_t value; +} __packed; + +struct ec_response_get_set_value { + uint32_t flags; + uint32_t value; +} __packed; + +/* More than one command can use these structs to get/set paramters. */ +#define EC_CMD_GSV_PAUSE_IN_S5 0x0c + /*****************************************************************************/ /* Flash commands */ @@ -425,6 +720,7 @@ struct ec_response_get_comms_status { /* Get flash info */ #define EC_CMD_FLASH_INFO 0x10 +/* Version 0 returns these fields */ struct ec_response_flash_info { /* Usable flash size, in bytes */ uint32_t flash_size; @@ -445,6 +741,37 @@ struct ec_response_flash_info { uint32_t protect_block_size; } __packed; +/* Flags for version 1+ flash info command */ +/* EC flash erases bits to 0 instead of 1 */ +#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) + +/* + * Version 1 returns the same initial fields as version 0, with additional + * fields following. + * + * gcc anonymous structs don't seem to get along with the __packed directive; + * if they did we'd define the version 0 struct as a sub-struct of this one. + */ +struct ec_response_flash_info_1 { + /* Version 0 fields; see above for description */ + uint32_t flash_size; + uint32_t write_block_size; + uint32_t erase_block_size; + uint32_t protect_block_size; + + /* Version 1 adds these fields: */ + /* + * Ideal write size in bytes. Writes will be fastest if size is + * exactly this and offset is a multiple of this. For example, an EC + * may have a write buffer which can do half-page operations if data is + * aligned, and a slower word-at-a-time write mode. + */ + uint32_t write_ideal_size; + + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; +} __packed; + /* * Read flash * @@ -459,15 +786,15 @@ struct ec_params_flash_read { /* Write flash */ #define EC_CMD_FLASH_WRITE 0x12 +#define EC_VER_FLASH_WRITE 1 + +/* Version 0 of the flash command supported only 64 bytes of data */ +#define EC_FLASH_WRITE_VER0_SIZE 64 struct ec_params_flash_write { uint32_t offset; /* Byte offset to write */ uint32_t size; /* Size to write in bytes */ - /* - * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to - * use a power of 2 so writes stay aligned. - */ - uint8_t data[64]; + /* Followed by data to write */ } __packed; /* Erase flash */ @@ -543,7 +870,7 @@ struct ec_response_flash_protect { enum ec_flash_region { /* Region which holds read-only EC image */ - EC_FLASH_REGION_RO, + EC_FLASH_REGION_RO = 0, /* Region which holds rewritable EC image */ EC_FLASH_REGION_RW, /* @@ -551,6 +878,8 @@ enum ec_flash_region { * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Number of regions */ + EC_FLASH_REGION_COUNT, }; struct ec_params_flash_region_info { @@ -639,15 +968,15 @@ struct rgb_s { */ struct lightbar_params { /* Timing */ - int google_ramp_up; - int google_ramp_down; - int s3s0_ramp_up; - int s0_tick_delay[2]; /* AC=0/1 */ - int s0a_tick_delay[2]; /* AC=0/1 */ - int s0s3_ramp_down; - int s3_sleep_for; - int s3_ramp_up; - int s3_ramp_down; + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; /* Oscillation */ uint8_t new_s0; @@ -676,7 +1005,7 @@ struct ec_params_lightbar { union { struct { /* no args */ - } dump, off, on, init, get_seq, get_params; + } dump, off, on, init, get_seq, get_params, version; struct num { uint8_t num; @@ -710,6 +1039,11 @@ struct ec_response_lightbar { struct lightbar_params get_params; + struct version { + uint32_t num; + uint32_t flags; + } version; + struct { /* no return params */ } off, on, init, brightness, seq, reg, rgb, demo, set_params; @@ -730,10 +1064,62 @@ enum lightbar_command { LIGHTBAR_CMD_DEMO = 9, LIGHTBAR_CMD_GET_PARAMS = 10, LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_VERSION = 12, LIGHTBAR_NUM_CMDS }; /*****************************************************************************/ +/* LED control commands */ + +#define EC_CMD_LED_CONTROL 0x29 + +enum ec_led_id { + /* LED to indicate battery state of charge */ + EC_LED_ID_BATTERY_LED = 0, + /* + * LED to indicate system power state (on or in suspend). + * May be on power button or on C-panel. + */ + EC_LED_ID_POWER_LED, + /* LED on power adapter or its plug */ + EC_LED_ID_ADAPTER_LED, + + EC_LED_ID_COUNT +}; + +/* LED control flags */ +#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */ +#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */ + +enum ec_led_colors { + EC_LED_COLOR_RED = 0, + EC_LED_COLOR_GREEN, + EC_LED_COLOR_BLUE, + EC_LED_COLOR_YELLOW, + EC_LED_COLOR_WHITE, + + EC_LED_COLOR_COUNT +}; + +struct ec_params_led_control { + uint8_t led_id; /* Which LED to control */ + uint8_t flags; /* Control flags */ + + uint8_t brightness[EC_LED_COLOR_COUNT]; +} __packed; + +struct ec_response_led_control { + /* + * Available brightness value range. + * + * Range 0 means color channel not present. + * Range 1 means on/off control. + * Other values means the LED is control by PWM. + */ + uint8_t brightness_range[EC_LED_COLOR_COUNT]; +} __packed; + +/*****************************************************************************/ /* Verified boot commands */ /* @@ -790,6 +1176,181 @@ enum ec_vboot_hash_status { #define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd /*****************************************************************************/ +/* + * Motion sense commands. We'll make separate structs for sub-commands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_MOTION_SENSE_CMD 0x2B + +/* Motion sense commands */ +enum motionsense_command { + /* + * Dump command returns all motion sensor data including motion sense + * module flags and individual sensor flags. + */ + MOTIONSENSE_CMD_DUMP = 0, + + /* + * Info command returns data describing the details of a given sensor, + * including enum motionsensor_type, enum motionsensor_location, and + * enum motionsensor_chip. + */ + MOTIONSENSE_CMD_INFO = 1, + + /* + * EC Rate command is a setter/getter command for the EC sampling rate + * of all motion sensors in milliseconds. + */ + MOTIONSENSE_CMD_EC_RATE = 2, + + /* + * Sensor ODR command is a setter/getter command for the output data + * rate of a specific motion sensor in millihertz. + */ + MOTIONSENSE_CMD_SENSOR_ODR = 3, + + /* + * Sensor range command is a setter/getter command for the range of + * a specified motion sensor in +/-G's or +/- deg/s. + */ + MOTIONSENSE_CMD_SENSOR_RANGE = 4, + + /* + * Setter/getter command for the keyboard wake angle. When the lid + * angle is greater than this value, keyboard wake is disabled in S3, + * and when the lid angle goes less than this value, keyboard wake is + * enabled. Note, the lid angle measurement is an approximate, + * un-calibrated value, hence the wake angle isn't exact. + */ + MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, + + /* Number of motionsense sub-commands. */ + MOTIONSENSE_NUM_CMDS +}; + +enum motionsensor_id { + EC_MOTION_SENSOR_ACCEL_BASE = 0, + EC_MOTION_SENSOR_ACCEL_LID = 1, + EC_MOTION_SENSOR_GYRO = 2, + + /* + * Note, if more sensors are added and this count changes, the padding + * in ec_response_motion_sense dump command must be modified. + */ + EC_MOTION_SENSOR_COUNT = 3 +}; + +/* List of motion sensor types. */ +enum motionsensor_type { + MOTIONSENSE_TYPE_ACCEL = 0, + MOTIONSENSE_TYPE_GYRO = 1, +}; + +/* List of motion sensor locations. */ +enum motionsensor_location { + MOTIONSENSE_LOC_BASE = 0, + MOTIONSENSE_LOC_LID = 1, +}; + +/* List of motion sensor chips. */ +enum motionsensor_chip { + MOTIONSENSE_CHIP_KXCJ9 = 0, +}; + +/* Module flag masks used for the dump sub-command. */ +#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0) + +/* Sensor flag masks used for the dump sub-command. */ +#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0) + +/* + * Send this value for the data element to only perform a read. If you + * send any other value, the EC will interpret it as data to set and will + * return the actual value set. + */ +#define EC_MOTION_SENSE_NO_VALUE -1 + +struct ec_params_motion_sense { + uint8_t cmd; + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct { + /* no args */ + } dump; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE and + * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct { + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int16_t data; + } ec_rate, kb_wake_angle; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct { + /* Should be element of enum motionsensor_id. */ + uint8_t sensor_num; + } info; + + /* + * Used for MOTIONSENSE_CMD_SENSOR_ODR and + * MOTIONSENSE_CMD_SENSOR_RANGE. + */ + struct { + /* Should be element of enum motionsensor_id. */ + uint8_t sensor_num; + + /* Rounding flag, true for round-up, false for down. */ + uint8_t roundup; + + uint16_t reserved; + + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int32_t data; + } sensor_odr, sensor_range; + }; +} __packed; + +struct ec_response_motion_sense { + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct { + /* Flags representing the motion sensor module. */ + uint8_t module_flags; + + /* Flags for each sensor in enum motionsensor_id. */ + uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT]; + + /* Array of all sensor data. Each sensor is 3-axis. */ + int16_t data[3*EC_MOTION_SENSOR_COUNT]; + } dump; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + } info; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, + * MOTIONSENSE_CMD_SENSOR_RANGE, and + * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct { + /* Current value of the parameter queried. */ + int32_t ret; + } ec_rate, sensor_odr, sensor_range, kb_wake_angle; + }; +} __packed; + +/*****************************************************************************/ /* USB charging control commands */ /* Set USB port charging mode */ @@ -868,20 +1429,27 @@ struct ec_response_port80_last_boot { } __packed; /*****************************************************************************/ -/* Thermal engine commands */ +/* Thermal engine commands. Note that there are two implementations. We'll + * reuse the command number, but the data and behavior is incompatible. + * Version 0 is what originally shipped on Link. + * Version 1 separates the CPU thermal limits from the fan control. + */ -/* Set thershold value */ #define EC_CMD_THERMAL_SET_THRESHOLD 0x50 +#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 + +/* The version 0 structs are opaque. You have to know what they are for + * the get/set commands to make any sense. + */ +/* Version 0 - set */ struct ec_params_thermal_set_threshold { uint8_t sensor_type; uint8_t threshold_id; uint16_t value; } __packed; -/* Get threshold value */ -#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 - +/* Version 0 - get */ struct ec_params_thermal_get_threshold { uint8_t sensor_type; uint8_t threshold_id; @@ -891,6 +1459,41 @@ struct ec_response_thermal_get_threshold { uint16_t value; } __packed; + +/* The version 1 structs are visible. */ +enum ec_temp_thresholds { + EC_TEMP_THRESH_WARN = 0, + EC_TEMP_THRESH_HIGH, + EC_TEMP_THRESH_HALT, + + EC_TEMP_THRESH_COUNT +}; + +/* Thermal configuration for one temperature sensor. Temps are in degrees K. + * Zero values will be silently ignored by the thermal task. + */ +struct ec_thermal_config { + uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ + uint32_t temp_fan_off; /* no active cooling needed */ + uint32_t temp_fan_max; /* max active cooling needed */ +} __packed; + +/* Version 1 - get config for one sensor. */ +struct ec_params_thermal_get_threshold_v1 { + uint32_t sensor_num; +} __packed; +/* This returns a struct ec_thermal_config */ + +/* Version 1 - set config for one sensor. + * Use read-modify-write for best results! */ +struct ec_params_thermal_set_threshold_v1 { + uint32_t sensor_num; + struct ec_thermal_config cfg; +} __packed; +/* This returns no data */ + +/****************************************************************************/ + /* Toggle automatic fan control */ #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 @@ -920,6 +1523,18 @@ struct ec_params_tmp006_set_calibration { float b2; } __packed; +/* Read raw TMP006 data */ +#define EC_CMD_TMP006_GET_RAW 0x55 + +struct ec_params_tmp006_get_raw { + uint8_t index; +} __packed; + +struct ec_response_tmp006_get_raw { + int32_t t; /* In 1/100 K */ + int32_t v; /* In nV */ +}; + /*****************************************************************************/ /* MKBP - Matrix KeyBoard Protocol */ @@ -1118,11 +1733,41 @@ struct ec_params_switch_enable_backlight { /* Enable/disable WLAN/Bluetooth */ #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 +#define EC_VER_SWITCH_ENABLE_WIRELESS 1 -struct ec_params_switch_enable_wireless { +/* Version 0 params; no response */ +struct ec_params_switch_enable_wireless_v0 { uint8_t enabled; } __packed; +/* Version 1 params */ +struct ec_params_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Which flags to copy from now_flags */ + uint8_t now_mask; + + /* + * Flags to leave enabled in S3, if they're on at the S0->S3 + * transition. (Other flags will be disabled by the S0->S3 + * transition.) + */ + uint8_t suspend_flags; + + /* Which flags to copy from suspend_flags */ + uint8_t suspend_mask; +} __packed; + +/* Version 1 response */ +struct ec_response_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Flags to leave enabled in S3 */ + uint8_t suspend_flags; +} __packed; + /*****************************************************************************/ /* GPIO commands. Only available on EC if write protect has been disabled. */ @@ -1147,11 +1792,16 @@ struct ec_response_gpio_get { /*****************************************************************************/ /* I2C commands. Only available when flash write protect is unlocked. */ +/* + * TODO(crosbug.com/p/23570): These commands are deprecated, and will be + * removed soon. Use EC_CMD_I2C_XFER instead. + */ + /* Read I2C bus */ #define EC_CMD_I2C_READ 0x94 struct ec_params_i2c_read { - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t read_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -1165,7 +1815,7 @@ struct ec_response_i2c_read { struct ec_params_i2c_write { uint16_t data; - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t write_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -1174,11 +1824,20 @@ struct ec_params_i2c_write { /*****************************************************************************/ /* Charge state commands. Only available when flash write protect unlocked. */ -/* Force charge state machine to stop in idle mode */ -#define EC_CMD_CHARGE_FORCE_IDLE 0x96 +/* Force charge state machine to stop charging the battery or force it to + * discharge the battery. + */ +#define EC_CMD_CHARGE_CONTROL 0x96 +#define EC_VER_CHARGE_CONTROL 1 -struct ec_params_force_idle { - uint8_t enabled; +enum ec_charge_control_mode { + CHARGE_CONTROL_NORMAL = 0, + CHARGE_CONTROL_IDLE, + CHARGE_CONTROL_DISCHARGE, +}; + +struct ec_params_charge_control { + uint32_t mode; /* enum charge_control_mode */ } __packed; /*****************************************************************************/ @@ -1206,14 +1865,231 @@ struct ec_params_force_idle { #define EC_CMD_BATTERY_CUT_OFF 0x99 /*****************************************************************************/ -/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ +/* USB port mux control. */ /* - * Dump charge state machine context. - * - * Response is a binary dump of charge state machine context. + * Switch USB mux or return to automatic switching. + */ +#define EC_CMD_USB_MUX 0x9a + +struct ec_params_usb_mux { + uint8_t mux; +} __packed; + +/*****************************************************************************/ +/* LDOs / FETs control. */ + +enum ec_ldo_state { + EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ + EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ +}; + +/* + * Switch on/off a LDO. + */ +#define EC_CMD_LDO_SET 0x9b + +struct ec_params_ldo_set { + uint8_t index; + uint8_t state; +} __packed; + +/* + * Get LDO state. + */ +#define EC_CMD_LDO_GET 0x9c + +struct ec_params_ldo_get { + uint8_t index; +} __packed; + +struct ec_response_ldo_get { + uint8_t state; +} __packed; + +/*****************************************************************************/ +/* Power info. */ + +/* + * Get power info. + */ +#define EC_CMD_POWER_INFO 0x9d + +struct ec_response_power_info { + uint32_t usb_dev_type; + uint16_t voltage_ac; + uint16_t voltage_system; + uint16_t current_system; + uint16_t usb_current_limit; +} __packed; + +/*****************************************************************************/ +/* I2C passthru command */ + +#define EC_CMD_I2C_PASSTHRU 0x9e + +/* Slave address is 10 (not 7) bit */ +#define EC_I2C_FLAG_10BIT (1 << 16) + +/* Read data; if not present, message is a write */ +#define EC_I2C_FLAG_READ (1 << 15) + +/* Mask for address */ +#define EC_I2C_ADDR_MASK 0x3ff + +#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ + +/* Any error */ +#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) + +struct ec_params_i2c_passthru_msg { + uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ + uint16_t len; /* Number of bytes to read or write */ +} __packed; + +struct ec_params_i2c_passthru { + uint8_t port; /* I2C port number */ + uint8_t num_msgs; /* Number of messages */ + struct ec_params_i2c_passthru_msg msg[]; + /* Data to write for all messages is concatenated here */ +} __packed; + +struct ec_response_i2c_passthru { + uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ + uint8_t num_msgs; /* Number of messages processed */ + uint8_t data[]; /* Data read by messages concatenated here */ +} __packed; + +/*****************************************************************************/ +/* Power button hang detect */ + +#define EC_CMD_HANG_DETECT 0x9f + +/* Reasons to start hang detection timer */ +/* Power button pressed */ +#define EC_HANG_START_ON_POWER_PRESS (1 << 0) + +/* Lid closed */ +#define EC_HANG_START_ON_LID_CLOSE (1 << 1) + + /* Lid opened */ +#define EC_HANG_START_ON_LID_OPEN (1 << 2) + +/* Start of AP S3->S0 transition (booting or resuming from suspend) */ +#define EC_HANG_START_ON_RESUME (1 << 3) + +/* Reasons to cancel hang detection */ + +/* Power button released */ +#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8) + +/* Any host command from AP received */ +#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9) + +/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ +#define EC_HANG_STOP_ON_SUSPEND (1 << 10) + +/* + * If this flag is set, all the other fields are ignored, and the hang detect + * timer is started. This provides the AP a way to start the hang timer + * without reconfiguring any of the other hang detect settings. Note that + * you must previously have configured the timeouts. + */ +#define EC_HANG_START_NOW (1 << 30) + +/* + * If this flag is set, all the other fields are ignored (including + * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer + * without reconfiguring any of the other hang detect settings. */ -#define EC_CMD_CHARGE_DUMP 0xa0 +#define EC_HANG_STOP_NOW (1 << 31) + +struct ec_params_hang_detect { + /* Flags; see EC_HANG_* */ + uint32_t flags; + + /* Timeout in msec before generating host event, if enabled */ + uint16_t host_event_timeout_msec; + + /* Timeout in msec before generating warm reboot, if enabled */ + uint16_t warm_reboot_timeout_msec; +} __packed; + +/*****************************************************************************/ +/* Commands for battery charging */ + +/* + * This is the single catch-all host command to exchange data regarding the + * charge state machine (v2 and up). + */ +#define EC_CMD_CHARGE_STATE 0xa0 + +/* Subcommands for this host command */ +enum charge_state_command { + CHARGE_STATE_CMD_GET_STATE, + CHARGE_STATE_CMD_GET_PARAM, + CHARGE_STATE_CMD_SET_PARAM, + CHARGE_STATE_NUM_CMDS +}; + +/* + * Known param numbers are defined here. Ranges are reserved for board-specific + * params, which are handled by the particular implementations. + */ +enum charge_state_params { + CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ + CS_PARAM_CHG_CURRENT, /* charger current limit */ + CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ + CS_PARAM_CHG_STATUS, /* charger-specific status */ + CS_PARAM_CHG_OPTION, /* charger-specific options */ + /* How many so far? */ + CS_NUM_BASE_PARAMS, + + /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ + CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, + CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, + + /* Other custom param ranges go here... */ +}; + +struct ec_params_charge_state { + uint8_t cmd; /* enum charge_state_command */ + union { + struct { + /* no args */ + } get_state; + + struct { + uint32_t param; /* enum charge_state_param */ + } get_param; + + struct { + uint32_t param; /* param to set */ + uint32_t value; /* value to set */ + } set_param; + }; +} __packed; + +struct ec_response_charge_state { + union { + struct { + int ac; + int chg_voltage; + int chg_current; + int chg_input_current; + int batt_state_of_charge; + } get_state; + + struct { + uint32_t value; + } get_param; + struct { + /* no return values */ + } set_param; + }; +} __packed; + /* * Set maximum battery charging current. @@ -1221,15 +2097,59 @@ struct ec_params_force_idle { #define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 struct ec_params_current_limit { - uint32_t limit; + uint32_t limit; /* in mA */ +} __packed; + +/* + * Set maximum external power current. + */ +#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 + +struct ec_params_ext_power_current_limit { + uint32_t limit; /* in mA */ +} __packed; + +/*****************************************************************************/ +/* Smart battery pass-through */ + +/* Get / Set 16-bit smart battery registers */ +#define EC_CMD_SB_READ_WORD 0xb0 +#define EC_CMD_SB_WRITE_WORD 0xb1 + +/* Get / Set string smart battery parameters + * formatted as SMBUS "block". + */ +#define EC_CMD_SB_READ_BLOCK 0xb2 +#define EC_CMD_SB_WRITE_BLOCK 0xb3 + +struct ec_params_sb_rd { + uint8_t reg; +} __packed; + +struct ec_response_sb_rd_word { + uint16_t value; +} __packed; + +struct ec_params_sb_wr_word { + uint8_t reg; + uint16_t value; +} __packed; + +struct ec_response_sb_rd_block { + uint8_t data[32]; +} __packed; + +struct ec_params_sb_wr_block { + uint8_t reg; + uint16_t data[32]; } __packed; /*****************************************************************************/ /* System commands */ /* - * TODO: this is a confusing name, since it doesn't necessarily reboot the EC. - * Rename to "set image" or something similar. + * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't + * necessarily reboot the EC. Rename to "image" or something similar? */ #define EC_CMD_REBOOT_EC 0xd2 @@ -1308,6 +2228,7 @@ struct ec_params_reboot_ec { #define EC_CMD_ACPI_QUERY_EVENT 0x84 /* Valid addresses in ACPI memory space, for read/write commands */ + /* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ #define EC_ACPI_MEM_VERSION 0x00 /* @@ -1317,8 +2238,60 @@ struct ec_params_reboot_ec { #define EC_ACPI_MEM_TEST 0x01 /* Test compliment; writes here are ignored. */ #define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 + /* Keyboard backlight brightness percent (0 - 100) */ #define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 +/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ +#define EC_ACPI_MEM_FAN_DUTY 0x04 + +/* + * DPTF temp thresholds. Any of the EC's temp sensors can have up to two + * independent thresholds attached to them. The current value of the ID + * register determines which sensor is affected by the THRESHOLD and COMMIT + * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme + * as the memory-mapped sensors. The COMMIT register applies those settings. + * + * The spec does not mandate any way to read back the threshold settings + * themselves, but when a threshold is crossed the AP needs a way to determine + * which sensor(s) are responsible. Each reading of the ID register clears and + * returns one sensor ID that has crossed one of its threshold (in either + * direction) since the last read. A value of 0xFF means "no new thresholds + * have tripped". Setting or enabling the thresholds for a sensor will clear + * the unread event count for that sensor. + */ +#define EC_ACPI_MEM_TEMP_ID 0x05 +#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 +#define EC_ACPI_MEM_TEMP_COMMIT 0x07 +/* + * Here are the bits for the COMMIT register: + * bit 0 selects the threshold index for the chosen sensor (0/1) + * bit 1 enables/disables the selected threshold (0 = off, 1 = on) + * Each write to the commit register affects one threshold. + */ +#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0) +#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1) +/* + * Example: + * + * Set the thresholds for sensor 2 to 50 C and 60 C: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET + * write 0x2 to [0x07] -- enable threshold 0 with this value + * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET + * write 0x3 to [0x07] -- enable threshold 1 with this value + * + * Disable the 60 C threshold, leaving the 50 C threshold unchanged: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x1 to [0x07] -- disable threshold 1 + */ + +/* DPTF battery charging current limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 + +/* Charging limit is specified in 64 mA steps */ +#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 +/* Value to disable DPTF battery charging limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff /* Current version of ACPI memory address space */ #define EC_ACPI_MEM_VERSION_CURRENT 1 @@ -1360,10 +2333,21 @@ struct ec_params_reboot_ec { * Header bytes greater than this indicate a later version. For example, * EC_CMD_VERSION0 + 1 means we are using version 1. * - * The old EC interface must not use commands 0dc or higher. + * The old EC interface must not use commands 0xdc or higher. */ #define EC_CMD_VERSION0 0xdc #endif /* !__ACPI__ */ +/*****************************************************************************/ +/* + * Deprecated constants. These constants have been renamed for clarity. The + * meaning and size has not changed. Programs that use the old names should + * switch to the new names soon, as the old names may not be carried forward + * forever. + */ +#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE +#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 +#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE + #endif /* __CROS_EC_COMMANDS_H */ diff --git a/include/linux/mfd/ipaq-micro.h b/include/linux/mfd/ipaq-micro.h new file mode 100644 index 000000000000..5c4d29f6674f --- /dev/null +++ b/include/linux/mfd/ipaq-micro.h @@ -0,0 +1,148 @@ +/* + * Header file for the compaq Micro MFD + */ + +#ifndef _MFD_IPAQ_MICRO_H_ +#define _MFD_IPAQ_MICRO_H_ + +#include <linux/spinlock.h> +#include <linux/completion.h> +#include <linux/list.h> + +#define TX_BUF_SIZE 32 +#define RX_BUF_SIZE 16 +#define CHAR_SOF 0x02 + +/* + * These are the different messages that can be sent to the microcontroller + * to control various aspects. + */ +#define MSG_VERSION 0x0 +#define MSG_KEYBOARD 0x2 +#define MSG_TOUCHSCREEN 0x3 +#define MSG_EEPROM_READ 0x4 +#define MSG_EEPROM_WRITE 0x5 +#define MSG_THERMAL_SENSOR 0x6 +#define MSG_NOTIFY_LED 0x8 +#define MSG_BATTERY 0x9 +#define MSG_SPI_READ 0xb +#define MSG_SPI_WRITE 0xc +#define MSG_BACKLIGHT 0xd /* H3600 only */ +#define MSG_CODEC_CTRL 0xe /* H3100 only */ +#define MSG_DISPLAY_CTRL 0xf /* H3100 only */ + +/* state of receiver parser */ +enum rx_state { + STATE_SOF = 0, /* Next byte should be start of frame */ + STATE_ID, /* Next byte is ID & message length */ + STATE_DATA, /* Next byte is a data byte */ + STATE_CHKSUM /* Next byte should be checksum */ +}; + +/** + * struct ipaq_micro_txdev - TX state + * @len: length of message in TX buffer + * @index: current index into TX buffer + * @buf: TX buffer + */ +struct ipaq_micro_txdev { + u8 len; + u8 index; + u8 buf[TX_BUF_SIZE]; +}; + +/** + * struct ipaq_micro_rxdev - RX state + * @state: context of RX state machine + * @chksum: calculated checksum + * @id: message ID from packet + * @len: RX buffer length + * @index: RX buffer index + * @buf: RX buffer + */ +struct ipaq_micro_rxdev { + enum rx_state state; + unsigned char chksum; + u8 id; + unsigned int len; + unsigned int index; + u8 buf[RX_BUF_SIZE]; +}; + +/** + * struct ipaq_micro_msg - message to the iPAQ microcontroller + * @id: 4-bit ID of the message + * @tx_len: length of TX data + * @tx_data: TX data to send + * @rx_len: length of receieved RX data + * @rx_data: RX data to recieve + * @ack: a completion that will be completed when RX is complete + * @node: list node if message gets queued + */ +struct ipaq_micro_msg { + u8 id; + u8 tx_len; + u8 tx_data[TX_BUF_SIZE]; + u8 rx_len; + u8 rx_data[RX_BUF_SIZE]; + struct completion ack; + struct list_head node; +}; + +/** + * struct ipaq_micro - iPAQ microcontroller state + * @dev: corresponding platform device + * @base: virtual memory base for underlying serial device + * @sdlc: virtual memory base for Synchronous Data Link Controller + * @version: version string + * @tx: TX state + * @rx: RX state + * @lock: lock for this state container + * @msg: current message + * @queue: message queue + * @key: callback for asynchronous key events + * @key_data: data to pass along with key events + * @ts: callback for asynchronous touchscreen events + * @ts_data: data to pass along with key events + */ +struct ipaq_micro { + struct device *dev; + void __iomem *base; + void __iomem *sdlc; + char version[5]; + struct ipaq_micro_txdev tx; /* transmit ISR state */ + struct ipaq_micro_rxdev rx; /* receive ISR state */ + spinlock_t lock; + struct ipaq_micro_msg *msg; + struct list_head queue; + void (*key) (void *data, int len, unsigned char *rxdata); + void *key_data; + void (*ts) (void *data, int len, unsigned char *rxdata); + void *ts_data; +}; + +extern int +ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg); + +static inline int +ipaq_micro_tx_msg_sync(struct ipaq_micro *micro, + struct ipaq_micro_msg *msg) +{ + int ret; + + init_completion(&msg->ack); + ret = ipaq_micro_tx_msg(micro, msg); + wait_for_completion(&msg->ack); + + return ret; +} + +static inline int +ipaq_micro_tx_msg_async(struct ipaq_micro *micro, + struct ipaq_micro_msg *msg) +{ + init_completion(&msg->ack); + return ipaq_micro_tx_msg(micro, msg); +} + +#endif /* _MFD_IPAQ_MICRO_H_ */ diff --git a/include/linux/mfd/kempld.h b/include/linux/mfd/kempld.h index b911ef3add03..26e0b469e567 100644 --- a/include/linux/mfd/kempld.h +++ b/include/linux/mfd/kempld.h @@ -51,6 +51,8 @@ #define KEMPLD_TYPE_DEBUG 0x1 #define KEMPLD_TYPE_CUSTOM 0x2 +#define KEMPLD_VERSION_LEN 10 + /** * struct kempld_info - PLD device information structure * @major: PLD major revision @@ -60,6 +62,7 @@ * @type: PLD type * @spec_major: PLD FW specification major revision * @spec_minor: PLD FW specification minor revision + * @version: PLD version string */ struct kempld_info { unsigned int major; @@ -69,6 +72,7 @@ struct kempld_info { unsigned int type; unsigned int spec_major; unsigned int spec_minor; + char version[KEMPLD_VERSION_LEN]; }; /** diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index a326c850f046..d63b1d309106 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -117,10 +117,6 @@ struct mc13xxx_led_platform_data { #define MAX_LED_CONTROL_REGS 6 -struct mc13xxx_leds_platform_data { - struct mc13xxx_led_platform_data *led; - int num_leds; - /* MC13783 LED Control 0 */ #define MC13783_LED_C0_ENABLE (1 << 0) #define MC13783_LED_C0_TRIODE_MD (1 << 7) @@ -169,10 +165,13 @@ struct mc13xxx_leds_platform_data { /* MC34708 LED Control 0 */ #define MC34708_LED_C0_CURRENT_R(x) (((x) & 0x3) << 9) #define MC34708_LED_C0_CURRENT_G(x) (((x) & 0x3) << 21) + +struct mc13xxx_leds_platform_data { + struct mc13xxx_led_platform_data *led; + int num_leds; u32 led_control[MAX_LED_CONTROL_REGS]; }; -struct mc13xxx_buttons_platform_data { #define MC13783_BUTTON_DBNC_0MS 0 #define MC13783_BUTTON_DBNC_30MS 1 #define MC13783_BUTTON_DBNC_150MS 2 @@ -180,6 +179,8 @@ struct mc13xxx_buttons_platform_data { #define MC13783_BUTTON_ENABLE (1 << 2) #define MC13783_BUTTON_POL_INVERT (1 << 3) #define MC13783_BUTTON_RESET_EN (1 << 4) + +struct mc13xxx_buttons_platform_data { int b1on_flags; unsigned short b1on_key; int b2on_flags; @@ -188,14 +189,14 @@ struct mc13xxx_buttons_platform_data { unsigned short b3on_key; }; +#define MC13783_TS_ATO_FIRST false +#define MC13783_TS_ATO_EACH true + struct mc13xxx_ts_platform_data { /* Delay between Touchscreen polarization and ADC Conversion. * Given in clock ticks of a 32 kHz clock which gives a granularity of * about 30.5ms */ u8 ato; - -#define MC13783_TS_ATO_FIRST false -#define MC13783_TS_ATO_EACH true /* Use the ATO delay only for the first conversion or for each one */ bool atox; }; @@ -210,11 +211,12 @@ struct mc13xxx_codec_platform_data { enum mc13783_ssi_port dac_ssi_port; }; -struct mc13xxx_platform_data { -#define MC13XXX_USE_TOUCHSCREEN (1 << 0) +#define MC13XXX_USE_TOUCHSCREEN (1 << 0) #define MC13XXX_USE_CODEC (1 << 1) #define MC13XXX_USE_ADC (1 << 2) #define MC13XXX_USE_RTC (1 << 3) + +struct mc13xxx_platform_data { unsigned int flags; struct mc13xxx_regulator_platform_data regulators; diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index b8f87b704409..3420e09e2e20 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -482,10 +482,10 @@ enum usb_irq_events { /* helper macro to get correct slave number */ #define PALMAS_BASE_TO_SLAVE(x) ((x >> 8) - 1) -#define PALMAS_BASE_TO_REG(x, y) ((x & 0xff) + y) +#define PALMAS_BASE_TO_REG(x, y) ((x & 0xFF) + y) /* Base addresses of IP blocks in Palmas */ -#define PALMAS_SMPS_DVS_BASE 0x20 +#define PALMAS_SMPS_DVS_BASE 0x020 #define PALMAS_RTC_BASE 0x100 #define PALMAS_VALIDITY_BASE 0x118 #define PALMAS_SMPS_BASE 0x120 @@ -504,19 +504,19 @@ enum usb_irq_events { #define PALMAS_TRIM_GPADC_BASE 0x3CD /* Registers for function RTC */ -#define PALMAS_SECONDS_REG 0x0 -#define PALMAS_MINUTES_REG 0x1 -#define PALMAS_HOURS_REG 0x2 -#define PALMAS_DAYS_REG 0x3 -#define PALMAS_MONTHS_REG 0x4 -#define PALMAS_YEARS_REG 0x5 -#define PALMAS_WEEKS_REG 0x6 -#define PALMAS_ALARM_SECONDS_REG 0x8 -#define PALMAS_ALARM_MINUTES_REG 0x9 -#define PALMAS_ALARM_HOURS_REG 0xA -#define PALMAS_ALARM_DAYS_REG 0xB -#define PALMAS_ALARM_MONTHS_REG 0xC -#define PALMAS_ALARM_YEARS_REG 0xD +#define PALMAS_SECONDS_REG 0x00 +#define PALMAS_MINUTES_REG 0x01 +#define PALMAS_HOURS_REG 0x02 +#define PALMAS_DAYS_REG 0x03 +#define PALMAS_MONTHS_REG 0x04 +#define PALMAS_YEARS_REG 0x05 +#define PALMAS_WEEKS_REG 0x06 +#define PALMAS_ALARM_SECONDS_REG 0x08 +#define PALMAS_ALARM_MINUTES_REG 0x09 +#define PALMAS_ALARM_HOURS_REG 0x0A +#define PALMAS_ALARM_DAYS_REG 0x0B +#define PALMAS_ALARM_MONTHS_REG 0x0C +#define PALMAS_ALARM_YEARS_REG 0x0D #define PALMAS_RTC_CTRL_REG 0x10 #define PALMAS_RTC_STATUS_REG 0x11 #define PALMAS_RTC_INTERRUPTS_REG 0x12 @@ -527,201 +527,201 @@ enum usb_irq_events { /* Bit definitions for SECONDS_REG */ #define PALMAS_SECONDS_REG_SEC1_MASK 0x70 -#define PALMAS_SECONDS_REG_SEC1_SHIFT 4 -#define PALMAS_SECONDS_REG_SEC0_MASK 0x0f -#define PALMAS_SECONDS_REG_SEC0_SHIFT 0 +#define PALMAS_SECONDS_REG_SEC1_SHIFT 0x04 +#define PALMAS_SECONDS_REG_SEC0_MASK 0x0F +#define PALMAS_SECONDS_REG_SEC0_SHIFT 0x00 /* Bit definitions for MINUTES_REG */ #define PALMAS_MINUTES_REG_MIN1_MASK 0x70 -#define PALMAS_MINUTES_REG_MIN1_SHIFT 4 -#define PALMAS_MINUTES_REG_MIN0_MASK 0x0f -#define PALMAS_MINUTES_REG_MIN0_SHIFT 0 +#define PALMAS_MINUTES_REG_MIN1_SHIFT 0x04 +#define PALMAS_MINUTES_REG_MIN0_MASK 0x0F +#define PALMAS_MINUTES_REG_MIN0_SHIFT 0x00 /* Bit definitions for HOURS_REG */ #define PALMAS_HOURS_REG_PM_NAM 0x80 -#define PALMAS_HOURS_REG_PM_NAM_SHIFT 7 +#define PALMAS_HOURS_REG_PM_NAM_SHIFT 0x07 #define PALMAS_HOURS_REG_HOUR1_MASK 0x30 -#define PALMAS_HOURS_REG_HOUR1_SHIFT 4 -#define PALMAS_HOURS_REG_HOUR0_MASK 0x0f -#define PALMAS_HOURS_REG_HOUR0_SHIFT 0 +#define PALMAS_HOURS_REG_HOUR1_SHIFT 0x04 +#define PALMAS_HOURS_REG_HOUR0_MASK 0x0F +#define PALMAS_HOURS_REG_HOUR0_SHIFT 0x00 /* Bit definitions for DAYS_REG */ #define PALMAS_DAYS_REG_DAY1_MASK 0x30 -#define PALMAS_DAYS_REG_DAY1_SHIFT 4 -#define PALMAS_DAYS_REG_DAY0_MASK 0x0f -#define PALMAS_DAYS_REG_DAY0_SHIFT 0 +#define PALMAS_DAYS_REG_DAY1_SHIFT 0x04 +#define PALMAS_DAYS_REG_DAY0_MASK 0x0F +#define PALMAS_DAYS_REG_DAY0_SHIFT 0x00 /* Bit definitions for MONTHS_REG */ #define PALMAS_MONTHS_REG_MONTH1 0x10 -#define PALMAS_MONTHS_REG_MONTH1_SHIFT 4 -#define PALMAS_MONTHS_REG_MONTH0_MASK 0x0f -#define PALMAS_MONTHS_REG_MONTH0_SHIFT 0 +#define PALMAS_MONTHS_REG_MONTH1_SHIFT 0x04 +#define PALMAS_MONTHS_REG_MONTH0_MASK 0x0F +#define PALMAS_MONTHS_REG_MONTH0_SHIFT 0x00 /* Bit definitions for YEARS_REG */ #define PALMAS_YEARS_REG_YEAR1_MASK 0xf0 -#define PALMAS_YEARS_REG_YEAR1_SHIFT 4 -#define PALMAS_YEARS_REG_YEAR0_MASK 0x0f -#define PALMAS_YEARS_REG_YEAR0_SHIFT 0 +#define PALMAS_YEARS_REG_YEAR1_SHIFT 0x04 +#define PALMAS_YEARS_REG_YEAR0_MASK 0x0F +#define PALMAS_YEARS_REG_YEAR0_SHIFT 0x00 /* Bit definitions for WEEKS_REG */ #define PALMAS_WEEKS_REG_WEEK_MASK 0x07 -#define PALMAS_WEEKS_REG_WEEK_SHIFT 0 +#define PALMAS_WEEKS_REG_WEEK_SHIFT 0x00 /* Bit definitions for ALARM_SECONDS_REG */ #define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_MASK 0x70 -#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT 4 -#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK 0x0f -#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT 0 +#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT 0x04 +#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK 0x0F +#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT 0x00 /* Bit definitions for ALARM_MINUTES_REG */ #define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_MASK 0x70 -#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT 4 -#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK 0x0f -#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT 0 +#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT 0x04 +#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK 0x0F +#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT 0x00 /* Bit definitions for ALARM_HOURS_REG */ #define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM 0x80 -#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT 7 +#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT 0x07 #define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_MASK 0x30 -#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT 4 -#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK 0x0f -#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT 0 +#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT 0x04 +#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK 0x0F +#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT 0x00 /* Bit definitions for ALARM_DAYS_REG */ #define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_MASK 0x30 -#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT 4 -#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK 0x0f -#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT 0 +#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT 0x04 +#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK 0x0F +#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT 0x00 /* Bit definitions for ALARM_MONTHS_REG */ #define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1 0x10 -#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT 4 -#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK 0x0f -#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT 0 +#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT 0x04 +#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK 0x0F +#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT 0x00 /* Bit definitions for ALARM_YEARS_REG */ #define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_MASK 0xf0 -#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT 4 -#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK 0x0f -#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT 0 +#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT 0x04 +#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK 0x0F +#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT 0x00 /* Bit definitions for RTC_CTRL_REG */ #define PALMAS_RTC_CTRL_REG_RTC_V_OPT 0x80 -#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT 7 +#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT 0x07 #define PALMAS_RTC_CTRL_REG_GET_TIME 0x40 -#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT 6 +#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT 0x06 #define PALMAS_RTC_CTRL_REG_SET_32_COUNTER 0x20 -#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT 5 +#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT 0x05 #define PALMAS_RTC_CTRL_REG_TEST_MODE 0x10 -#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT 4 +#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT 0x04 #define PALMAS_RTC_CTRL_REG_MODE_12_24 0x08 -#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT 3 +#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT 0x03 #define PALMAS_RTC_CTRL_REG_AUTO_COMP 0x04 -#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT 2 +#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT 0x02 #define PALMAS_RTC_CTRL_REG_ROUND_30S 0x02 -#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT 1 +#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT 0x01 #define PALMAS_RTC_CTRL_REG_STOP_RTC 0x01 -#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT 0 +#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT 0x00 /* Bit definitions for RTC_STATUS_REG */ #define PALMAS_RTC_STATUS_REG_POWER_UP 0x80 -#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT 7 +#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT 0x07 #define PALMAS_RTC_STATUS_REG_ALARM 0x40 -#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT 6 +#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT 0x06 #define PALMAS_RTC_STATUS_REG_EVENT_1D 0x20 -#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT 5 +#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT 0x05 #define PALMAS_RTC_STATUS_REG_EVENT_1H 0x10 -#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT 4 +#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT 0x04 #define PALMAS_RTC_STATUS_REG_EVENT_1M 0x08 -#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT 3 +#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT 0x03 #define PALMAS_RTC_STATUS_REG_EVENT_1S 0x04 -#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT 2 +#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT 0x02 #define PALMAS_RTC_STATUS_REG_RUN 0x02 -#define PALMAS_RTC_STATUS_REG_RUN_SHIFT 1 +#define PALMAS_RTC_STATUS_REG_RUN_SHIFT 0x01 /* Bit definitions for RTC_INTERRUPTS_REG */ #define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN 0x10 -#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT 4 +#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT 0x04 #define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM 0x08 -#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT 3 +#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT 0x03 #define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER 0x04 -#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT 2 +#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT 0x02 #define PALMAS_RTC_INTERRUPTS_REG_EVERY_MASK 0x03 -#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT 0 +#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT 0x00 /* Bit definitions for RTC_COMP_LSB_REG */ -#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK 0xff -#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT 0 +#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK 0xFF +#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT 0x00 /* Bit definitions for RTC_COMP_MSB_REG */ -#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK 0xff -#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT 0 +#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK 0xFF +#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT 0x00 /* Bit definitions for RTC_RES_PROG_REG */ -#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK 0x3f -#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT 0 +#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK 0x3F +#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT 0x00 /* Bit definitions for RTC_RESET_STATUS_REG */ #define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS 0x01 -#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT 0 +#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT 0x00 /* Registers for function BACKUP */ -#define PALMAS_BACKUP0 0x0 -#define PALMAS_BACKUP1 0x1 -#define PALMAS_BACKUP2 0x2 -#define PALMAS_BACKUP3 0x3 -#define PALMAS_BACKUP4 0x4 -#define PALMAS_BACKUP5 0x5 -#define PALMAS_BACKUP6 0x6 -#define PALMAS_BACKUP7 0x7 +#define PALMAS_BACKUP0 0x00 +#define PALMAS_BACKUP1 0x01 +#define PALMAS_BACKUP2 0x02 +#define PALMAS_BACKUP3 0x03 +#define PALMAS_BACKUP4 0x04 +#define PALMAS_BACKUP5 0x05 +#define PALMAS_BACKUP6 0x06 +#define PALMAS_BACKUP7 0x07 /* Bit definitions for BACKUP0 */ -#define PALMAS_BACKUP0_BACKUP_MASK 0xff -#define PALMAS_BACKUP0_BACKUP_SHIFT 0 +#define PALMAS_BACKUP0_BACKUP_MASK 0xFF +#define PALMAS_BACKUP0_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP1 */ -#define PALMAS_BACKUP1_BACKUP_MASK 0xff -#define PALMAS_BACKUP1_BACKUP_SHIFT 0 +#define PALMAS_BACKUP1_BACKUP_MASK 0xFF +#define PALMAS_BACKUP1_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP2 */ -#define PALMAS_BACKUP2_BACKUP_MASK 0xff -#define PALMAS_BACKUP2_BACKUP_SHIFT 0 +#define PALMAS_BACKUP2_BACKUP_MASK 0xFF +#define PALMAS_BACKUP2_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP3 */ -#define PALMAS_BACKUP3_BACKUP_MASK 0xff -#define PALMAS_BACKUP3_BACKUP_SHIFT 0 +#define PALMAS_BACKUP3_BACKUP_MASK 0xFF +#define PALMAS_BACKUP3_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP4 */ -#define PALMAS_BACKUP4_BACKUP_MASK 0xff -#define PALMAS_BACKUP4_BACKUP_SHIFT 0 +#define PALMAS_BACKUP4_BACKUP_MASK 0xFF +#define PALMAS_BACKUP4_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP5 */ -#define PALMAS_BACKUP5_BACKUP_MASK 0xff -#define PALMAS_BACKUP5_BACKUP_SHIFT 0 +#define PALMAS_BACKUP5_BACKUP_MASK 0xFF +#define PALMAS_BACKUP5_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP6 */ -#define PALMAS_BACKUP6_BACKUP_MASK 0xff -#define PALMAS_BACKUP6_BACKUP_SHIFT 0 +#define PALMAS_BACKUP6_BACKUP_MASK 0xFF +#define PALMAS_BACKUP6_BACKUP_SHIFT 0x00 /* Bit definitions for BACKUP7 */ -#define PALMAS_BACKUP7_BACKUP_MASK 0xff -#define PALMAS_BACKUP7_BACKUP_SHIFT 0 +#define PALMAS_BACKUP7_BACKUP_MASK 0xFF +#define PALMAS_BACKUP7_BACKUP_SHIFT 0x00 /* Registers for function SMPS */ -#define PALMAS_SMPS12_CTRL 0x0 -#define PALMAS_SMPS12_TSTEP 0x1 -#define PALMAS_SMPS12_FORCE 0x2 -#define PALMAS_SMPS12_VOLTAGE 0x3 -#define PALMAS_SMPS3_CTRL 0x4 -#define PALMAS_SMPS3_VOLTAGE 0x7 -#define PALMAS_SMPS45_CTRL 0x8 -#define PALMAS_SMPS45_TSTEP 0x9 -#define PALMAS_SMPS45_FORCE 0xA -#define PALMAS_SMPS45_VOLTAGE 0xB -#define PALMAS_SMPS6_CTRL 0xC -#define PALMAS_SMPS6_TSTEP 0xD -#define PALMAS_SMPS6_FORCE 0xE -#define PALMAS_SMPS6_VOLTAGE 0xF +#define PALMAS_SMPS12_CTRL 0x00 +#define PALMAS_SMPS12_TSTEP 0x01 +#define PALMAS_SMPS12_FORCE 0x02 +#define PALMAS_SMPS12_VOLTAGE 0x03 +#define PALMAS_SMPS3_CTRL 0x04 +#define PALMAS_SMPS3_VOLTAGE 0x07 +#define PALMAS_SMPS45_CTRL 0x08 +#define PALMAS_SMPS45_TSTEP 0x09 +#define PALMAS_SMPS45_FORCE 0x0A +#define PALMAS_SMPS45_VOLTAGE 0x0B +#define PALMAS_SMPS6_CTRL 0x0C +#define PALMAS_SMPS6_TSTEP 0x0D +#define PALMAS_SMPS6_FORCE 0x0E +#define PALMAS_SMPS6_VOLTAGE 0x0F #define PALMAS_SMPS7_CTRL 0x10 #define PALMAS_SMPS7_VOLTAGE 0x13 #define PALMAS_SMPS8_CTRL 0x14 @@ -744,303 +744,303 @@ enum usb_irq_events { /* Bit definitions for SMPS12_CTRL */ #define PALMAS_SMPS12_CTRL_WR_S 0x80 -#define PALMAS_SMPS12_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS12_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN 0x40 -#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT 6 +#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT 0x06 #define PALMAS_SMPS12_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS12_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS12_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS12_TSTEP */ #define PALMAS_SMPS12_TSTEP_TSTEP_MASK 0x03 -#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT 0 +#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT 0x00 /* Bit definitions for SMPS12_FORCE */ #define PALMAS_SMPS12_FORCE_CMD 0x80 -#define PALMAS_SMPS12_FORCE_CMD_SHIFT 7 -#define PALMAS_SMPS12_FORCE_VSEL_MASK 0x7f -#define PALMAS_SMPS12_FORCE_VSEL_SHIFT 0 +#define PALMAS_SMPS12_FORCE_CMD_SHIFT 0x07 +#define PALMAS_SMPS12_FORCE_VSEL_MASK 0x7F +#define PALMAS_SMPS12_FORCE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS12_VOLTAGE */ #define PALMAS_SMPS12_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS3_CTRL */ #define PALMAS_SMPS3_CTRL_WR_S 0x80 -#define PALMAS_SMPS3_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS3_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS3_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS3_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS3_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS3_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS3_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS3_VOLTAGE */ #define PALMAS_SMPS3_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS45_CTRL */ #define PALMAS_SMPS45_CTRL_WR_S 0x80 -#define PALMAS_SMPS45_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS45_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN 0x40 -#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT 6 +#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT 0x06 #define PALMAS_SMPS45_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS45_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS45_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS45_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS45_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS45_TSTEP */ #define PALMAS_SMPS45_TSTEP_TSTEP_MASK 0x03 -#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT 0 +#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT 0x00 /* Bit definitions for SMPS45_FORCE */ #define PALMAS_SMPS45_FORCE_CMD 0x80 -#define PALMAS_SMPS45_FORCE_CMD_SHIFT 7 -#define PALMAS_SMPS45_FORCE_VSEL_MASK 0x7f -#define PALMAS_SMPS45_FORCE_VSEL_SHIFT 0 +#define PALMAS_SMPS45_FORCE_CMD_SHIFT 0x07 +#define PALMAS_SMPS45_FORCE_VSEL_MASK 0x7F +#define PALMAS_SMPS45_FORCE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS45_VOLTAGE */ #define PALMAS_SMPS45_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS6_CTRL */ #define PALMAS_SMPS6_CTRL_WR_S 0x80 -#define PALMAS_SMPS6_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS6_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN 0x40 -#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT 6 +#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT 0x06 #define PALMAS_SMPS6_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS6_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS6_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS6_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS6_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS6_TSTEP */ #define PALMAS_SMPS6_TSTEP_TSTEP_MASK 0x03 -#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT 0 +#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT 0x00 /* Bit definitions for SMPS6_FORCE */ #define PALMAS_SMPS6_FORCE_CMD 0x80 -#define PALMAS_SMPS6_FORCE_CMD_SHIFT 7 -#define PALMAS_SMPS6_FORCE_VSEL_MASK 0x7f -#define PALMAS_SMPS6_FORCE_VSEL_SHIFT 0 +#define PALMAS_SMPS6_FORCE_CMD_SHIFT 0x07 +#define PALMAS_SMPS6_FORCE_VSEL_MASK 0x7F +#define PALMAS_SMPS6_FORCE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS6_VOLTAGE */ #define PALMAS_SMPS6_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS7_CTRL */ #define PALMAS_SMPS7_CTRL_WR_S 0x80 -#define PALMAS_SMPS7_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS7_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS7_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS7_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS7_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS7_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS7_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS7_VOLTAGE */ #define PALMAS_SMPS7_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS8_CTRL */ #define PALMAS_SMPS8_CTRL_WR_S 0x80 -#define PALMAS_SMPS8_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS8_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN 0x40 -#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT 6 +#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT 0x06 #define PALMAS_SMPS8_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS8_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS8_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS8_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS8_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS8_TSTEP */ #define PALMAS_SMPS8_TSTEP_TSTEP_MASK 0x03 -#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT 0 +#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT 0x00 /* Bit definitions for SMPS8_FORCE */ #define PALMAS_SMPS8_FORCE_CMD 0x80 -#define PALMAS_SMPS8_FORCE_CMD_SHIFT 7 -#define PALMAS_SMPS8_FORCE_VSEL_MASK 0x7f -#define PALMAS_SMPS8_FORCE_VSEL_SHIFT 0 +#define PALMAS_SMPS8_FORCE_CMD_SHIFT 0x07 +#define PALMAS_SMPS8_FORCE_VSEL_MASK 0x7F +#define PALMAS_SMPS8_FORCE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS8_VOLTAGE */ #define PALMAS_SMPS8_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS9_CTRL */ #define PALMAS_SMPS9_CTRL_WR_S 0x80 -#define PALMAS_SMPS9_CTRL_WR_S_SHIFT 7 +#define PALMAS_SMPS9_CTRL_WR_S_SHIFT 0x07 #define PALMAS_SMPS9_CTRL_STATUS_MASK 0x30 -#define PALMAS_SMPS9_CTRL_STATUS_SHIFT 4 +#define PALMAS_SMPS9_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SMPS9_CTRL_MODE_SLEEP_MASK 0x0c -#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SMPS9_CTRL_MODE_ACTIVE_MASK 0x03 -#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS9_VOLTAGE */ #define PALMAS_SMPS9_VOLTAGE_RANGE 0x80 -#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT 7 -#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK 0x7f -#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT 0x07 +#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK 0x7F +#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for SMPS10_CTRL */ #define PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK 0xf0 -#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT 4 -#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK 0x0f -#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT 0x04 +#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK 0x0F +#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SMPS10_STATUS */ -#define PALMAS_SMPS10_STATUS_STATUS_MASK 0x0f -#define PALMAS_SMPS10_STATUS_STATUS_SHIFT 0 +#define PALMAS_SMPS10_STATUS_STATUS_MASK 0x0F +#define PALMAS_SMPS10_STATUS_STATUS_SHIFT 0x00 /* Bit definitions for SMPS_CTRL */ #define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN 0x20 -#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT 5 +#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT 0x05 #define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN 0x10 -#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT 4 +#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT 0x04 #define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_MASK 0x0c -#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT 2 +#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT 0x02 #define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_MASK 0x03 -#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT 0 +#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT 0x00 /* Bit definitions for SMPS_PD_CTRL */ #define PALMAS_SMPS_PD_CTRL_SMPS9 0x40 -#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT 6 +#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT 0x06 #define PALMAS_SMPS_PD_CTRL_SMPS8 0x20 -#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT 5 +#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT 0x05 #define PALMAS_SMPS_PD_CTRL_SMPS7 0x10 -#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT 4 +#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT 0x04 #define PALMAS_SMPS_PD_CTRL_SMPS6 0x08 -#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT 3 +#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT 0x03 #define PALMAS_SMPS_PD_CTRL_SMPS45 0x04 -#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT 2 +#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT 0x02 #define PALMAS_SMPS_PD_CTRL_SMPS3 0x02 -#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT 1 +#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT 0x01 #define PALMAS_SMPS_PD_CTRL_SMPS12 0x01 -#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT 0 +#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT 0x00 /* Bit definitions for SMPS_THERMAL_EN */ #define PALMAS_SMPS_THERMAL_EN_SMPS9 0x40 -#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT 6 +#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT 0x06 #define PALMAS_SMPS_THERMAL_EN_SMPS8 0x20 -#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT 5 +#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT 0x05 #define PALMAS_SMPS_THERMAL_EN_SMPS6 0x08 -#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT 3 +#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT 0x03 #define PALMAS_SMPS_THERMAL_EN_SMPS457 0x04 -#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT 2 +#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT 0x02 #define PALMAS_SMPS_THERMAL_EN_SMPS123 0x01 -#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT 0 +#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT 0x00 /* Bit definitions for SMPS_THERMAL_STATUS */ #define PALMAS_SMPS_THERMAL_STATUS_SMPS9 0x40 -#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT 6 +#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT 0x06 #define PALMAS_SMPS_THERMAL_STATUS_SMPS8 0x20 -#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT 5 +#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT 0x05 #define PALMAS_SMPS_THERMAL_STATUS_SMPS6 0x08 -#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT 3 +#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT 0x03 #define PALMAS_SMPS_THERMAL_STATUS_SMPS457 0x04 -#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT 2 +#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT 0x02 #define PALMAS_SMPS_THERMAL_STATUS_SMPS123 0x01 -#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT 0 +#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT 0x00 /* Bit definitions for SMPS_SHORT_STATUS */ #define PALMAS_SMPS_SHORT_STATUS_SMPS10 0x80 -#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT 7 +#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT 0x07 #define PALMAS_SMPS_SHORT_STATUS_SMPS9 0x40 -#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT 6 +#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT 0x06 #define PALMAS_SMPS_SHORT_STATUS_SMPS8 0x20 -#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT 5 +#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT 0x05 #define PALMAS_SMPS_SHORT_STATUS_SMPS7 0x10 -#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT 4 +#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT 0x04 #define PALMAS_SMPS_SHORT_STATUS_SMPS6 0x08 -#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT 3 +#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT 0x03 #define PALMAS_SMPS_SHORT_STATUS_SMPS45 0x04 -#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT 2 +#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT 0x02 #define PALMAS_SMPS_SHORT_STATUS_SMPS3 0x02 -#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT 1 +#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT 0x01 #define PALMAS_SMPS_SHORT_STATUS_SMPS12 0x01 -#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT 0 +#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT 0x00 /* Bit definitions for SMPS_NEGATIVE_CURRENT_LIMIT_EN */ #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9 0x40 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT 6 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT 0x06 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8 0x20 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT 5 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT 0x05 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7 0x10 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT 4 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT 0x04 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6 0x08 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT 3 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT 0x03 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45 0x04 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT 2 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT 0x02 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3 0x02 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT 1 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT 0x01 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12 0x01 -#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT 0 +#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT 0x00 /* Bit definitions for SMPS_POWERGOOD_MASK1 */ #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10 0x80 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT 7 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT 0x07 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9 0x40 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT 6 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT 0x06 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8 0x20 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT 5 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT 0x05 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7 0x10 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT 4 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT 0x04 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6 0x08 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT 3 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT 0x03 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45 0x04 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT 2 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT 0x02 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3 0x02 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT 1 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT 0x01 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12 0x01 -#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT 0 +#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT 0x00 /* Bit definitions for SMPS_POWERGOOD_MASK2 */ #define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT 0x80 -#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT 7 +#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT 0x07 #define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7 0x04 -#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT 2 +#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT 0x02 #define PALMAS_SMPS_POWERGOOD_MASK2_VBUS 0x02 -#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT 1 +#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT 0x01 #define PALMAS_SMPS_POWERGOOD_MASK2_ACOK 0x01 -#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT 0 +#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT 0x00 /* Registers for function LDO */ -#define PALMAS_LDO1_CTRL 0x0 -#define PALMAS_LDO1_VOLTAGE 0x1 -#define PALMAS_LDO2_CTRL 0x2 -#define PALMAS_LDO2_VOLTAGE 0x3 -#define PALMAS_LDO3_CTRL 0x4 -#define PALMAS_LDO3_VOLTAGE 0x5 -#define PALMAS_LDO4_CTRL 0x6 -#define PALMAS_LDO4_VOLTAGE 0x7 -#define PALMAS_LDO5_CTRL 0x8 -#define PALMAS_LDO5_VOLTAGE 0x9 -#define PALMAS_LDO6_CTRL 0xA -#define PALMAS_LDO6_VOLTAGE 0xB -#define PALMAS_LDO7_CTRL 0xC -#define PALMAS_LDO7_VOLTAGE 0xD -#define PALMAS_LDO8_CTRL 0xE -#define PALMAS_LDO8_VOLTAGE 0xF +#define PALMAS_LDO1_CTRL 0x00 +#define PALMAS_LDO1_VOLTAGE 0x01 +#define PALMAS_LDO2_CTRL 0x02 +#define PALMAS_LDO2_VOLTAGE 0x03 +#define PALMAS_LDO3_CTRL 0x04 +#define PALMAS_LDO3_VOLTAGE 0x05 +#define PALMAS_LDO4_CTRL 0x06 +#define PALMAS_LDO4_VOLTAGE 0x07 +#define PALMAS_LDO5_CTRL 0x08 +#define PALMAS_LDO5_VOLTAGE 0x09 +#define PALMAS_LDO6_CTRL 0x0A +#define PALMAS_LDO6_VOLTAGE 0x0B +#define PALMAS_LDO7_CTRL 0x0C +#define PALMAS_LDO7_VOLTAGE 0x0D +#define PALMAS_LDO8_CTRL 0x0E +#define PALMAS_LDO8_VOLTAGE 0x0F #define PALMAS_LDO9_CTRL 0x10 #define PALMAS_LDO9_VOLTAGE 0x11 #define PALMAS_LDOLN_CTRL 0x12 @@ -1055,236 +1055,236 @@ enum usb_irq_events { /* Bit definitions for LDO1_CTRL */ #define PALMAS_LDO1_CTRL_WR_S 0x80 -#define PALMAS_LDO1_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO1_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO1_CTRL_STATUS 0x10 -#define PALMAS_LDO1_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO1_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO1_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO1_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO1_VOLTAGE */ -#define PALMAS_LDO1_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO1_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO2_CTRL */ #define PALMAS_LDO2_CTRL_WR_S 0x80 -#define PALMAS_LDO2_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO2_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO2_CTRL_STATUS 0x10 -#define PALMAS_LDO2_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO2_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO2_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO2_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO2_VOLTAGE */ -#define PALMAS_LDO2_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO2_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO3_CTRL */ #define PALMAS_LDO3_CTRL_WR_S 0x80 -#define PALMAS_LDO3_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO3_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO3_CTRL_STATUS 0x10 -#define PALMAS_LDO3_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO3_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO3_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO3_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO3_VOLTAGE */ -#define PALMAS_LDO3_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO3_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO4_CTRL */ #define PALMAS_LDO4_CTRL_WR_S 0x80 -#define PALMAS_LDO4_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO4_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO4_CTRL_STATUS 0x10 -#define PALMAS_LDO4_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO4_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO4_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO4_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO4_VOLTAGE */ -#define PALMAS_LDO4_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO4_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO5_CTRL */ #define PALMAS_LDO5_CTRL_WR_S 0x80 -#define PALMAS_LDO5_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO5_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO5_CTRL_STATUS 0x10 -#define PALMAS_LDO5_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO5_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO5_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO5_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO5_VOLTAGE */ -#define PALMAS_LDO5_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO5_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO6_CTRL */ #define PALMAS_LDO6_CTRL_WR_S 0x80 -#define PALMAS_LDO6_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO6_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO6_CTRL_LDO_VIB_EN 0x40 -#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT 6 +#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT 0x06 #define PALMAS_LDO6_CTRL_STATUS 0x10 -#define PALMAS_LDO6_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO6_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO6_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO6_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO6_VOLTAGE */ -#define PALMAS_LDO6_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO6_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO7_CTRL */ #define PALMAS_LDO7_CTRL_WR_S 0x80 -#define PALMAS_LDO7_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO7_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO7_CTRL_STATUS 0x10 -#define PALMAS_LDO7_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO7_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO7_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO7_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO7_VOLTAGE */ -#define PALMAS_LDO7_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO7_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO8_CTRL */ #define PALMAS_LDO8_CTRL_WR_S 0x80 -#define PALMAS_LDO8_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO8_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO8_CTRL_LDO_TRACKING_EN 0x40 -#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT 6 +#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT 0x06 #define PALMAS_LDO8_CTRL_STATUS 0x10 -#define PALMAS_LDO8_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO8_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO8_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO8_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO8_VOLTAGE */ -#define PALMAS_LDO8_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO8_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO9_CTRL */ #define PALMAS_LDO9_CTRL_WR_S 0x80 -#define PALMAS_LDO9_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDO9_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDO9_CTRL_LDO_BYPASS_EN 0x40 -#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT 6 +#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT 0x06 #define PALMAS_LDO9_CTRL_STATUS 0x10 -#define PALMAS_LDO9_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDO9_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDO9_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDO9_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDO9_VOLTAGE */ -#define PALMAS_LDO9_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDO9_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDOLN_CTRL */ #define PALMAS_LDOLN_CTRL_WR_S 0x80 -#define PALMAS_LDOLN_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDOLN_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDOLN_CTRL_STATUS 0x10 -#define PALMAS_LDOLN_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDOLN_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDOLN_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDOLN_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDOLN_VOLTAGE */ -#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDOUSB_CTRL */ #define PALMAS_LDOUSB_CTRL_WR_S 0x80 -#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT 7 +#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT 0x07 #define PALMAS_LDOUSB_CTRL_STATUS 0x10 -#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT 4 +#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT 0x04 #define PALMAS_LDOUSB_CTRL_MODE_SLEEP 0x04 -#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_LDOUSB_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for LDOUSB_VOLTAGE */ -#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK 0x3f -#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT 0 +#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK 0x3F +#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT 0x00 /* Bit definitions for LDO_CTRL */ #define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS 0x01 -#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT 0 +#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT 0x00 /* Bit definitions for LDO_PD_CTRL1 */ #define PALMAS_LDO_PD_CTRL1_LDO8 0x80 -#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT 7 +#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT 0x07 #define PALMAS_LDO_PD_CTRL1_LDO7 0x40 -#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT 6 +#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT 0x06 #define PALMAS_LDO_PD_CTRL1_LDO6 0x20 -#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT 5 +#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT 0x05 #define PALMAS_LDO_PD_CTRL1_LDO5 0x10 -#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT 4 +#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT 0x04 #define PALMAS_LDO_PD_CTRL1_LDO4 0x08 -#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT 3 +#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT 0x03 #define PALMAS_LDO_PD_CTRL1_LDO3 0x04 -#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT 2 +#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT 0x02 #define PALMAS_LDO_PD_CTRL1_LDO2 0x02 -#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT 1 +#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT 0x01 #define PALMAS_LDO_PD_CTRL1_LDO1 0x01 -#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT 0 +#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT 0x00 /* Bit definitions for LDO_PD_CTRL2 */ #define PALMAS_LDO_PD_CTRL2_LDOUSB 0x04 -#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT 2 +#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT 0x02 #define PALMAS_LDO_PD_CTRL2_LDOLN 0x02 -#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT 1 +#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT 0x01 #define PALMAS_LDO_PD_CTRL2_LDO9 0x01 -#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT 0 +#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT 0x00 /* Bit definitions for LDO_SHORT_STATUS1 */ #define PALMAS_LDO_SHORT_STATUS1_LDO8 0x80 -#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT 7 +#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT 0x07 #define PALMAS_LDO_SHORT_STATUS1_LDO7 0x40 -#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT 6 +#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT 0x06 #define PALMAS_LDO_SHORT_STATUS1_LDO6 0x20 -#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT 5 +#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT 0x05 #define PALMAS_LDO_SHORT_STATUS1_LDO5 0x10 -#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT 4 +#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT 0x04 #define PALMAS_LDO_SHORT_STATUS1_LDO4 0x08 -#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT 3 +#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT 0x03 #define PALMAS_LDO_SHORT_STATUS1_LDO3 0x04 -#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT 2 +#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT 0x02 #define PALMAS_LDO_SHORT_STATUS1_LDO2 0x02 -#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT 1 +#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT 0x01 #define PALMAS_LDO_SHORT_STATUS1_LDO1 0x01 -#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT 0 +#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT 0x00 /* Bit definitions for LDO_SHORT_STATUS2 */ #define PALMAS_LDO_SHORT_STATUS2_LDOVANA 0x08 -#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT 3 +#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT 0x03 #define PALMAS_LDO_SHORT_STATUS2_LDOUSB 0x04 -#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT 2 +#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT 0x02 #define PALMAS_LDO_SHORT_STATUS2_LDOLN 0x02 -#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT 1 +#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT 0x01 #define PALMAS_LDO_SHORT_STATUS2_LDO9 0x01 -#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT 0 +#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT 0x00 /* Registers for function PMU_CONTROL */ -#define PALMAS_DEV_CTRL 0x0 -#define PALMAS_POWER_CTRL 0x1 -#define PALMAS_VSYS_LO 0x2 -#define PALMAS_VSYS_MON 0x3 -#define PALMAS_VBAT_MON 0x4 -#define PALMAS_WATCHDOG 0x5 -#define PALMAS_BOOT_STATUS 0x6 -#define PALMAS_BATTERY_BOUNCE 0x7 -#define PALMAS_BACKUP_BATTERY_CTRL 0x8 -#define PALMAS_LONG_PRESS_KEY 0x9 -#define PALMAS_OSC_THERM_CTRL 0xA -#define PALMAS_BATDEBOUNCING 0xB -#define PALMAS_SWOFF_HWRST 0xF +#define PALMAS_DEV_CTRL 0x00 +#define PALMAS_POWER_CTRL 0x01 +#define PALMAS_VSYS_LO 0x02 +#define PALMAS_VSYS_MON 0x03 +#define PALMAS_VBAT_MON 0x04 +#define PALMAS_WATCHDOG 0x05 +#define PALMAS_BOOT_STATUS 0x06 +#define PALMAS_BATTERY_BOUNCE 0x07 +#define PALMAS_BACKUP_BATTERY_CTRL 0x08 +#define PALMAS_LONG_PRESS_KEY 0x09 +#define PALMAS_OSC_THERM_CTRL 0x0A +#define PALMAS_BATDEBOUNCING 0x0B +#define PALMAS_SWOFF_HWRST 0x0F #define PALMAS_SWOFF_COLDRST 0x10 #define PALMAS_SWOFF_STATUS 0x11 #define PALMAS_PMU_CONFIG 0x12 @@ -1296,668 +1296,668 @@ enum usb_irq_events { /* Bit definitions for DEV_CTRL */ #define PALMAS_DEV_CTRL_DEV_STATUS_MASK 0x0c -#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT 2 +#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT 0x02 #define PALMAS_DEV_CTRL_SW_RST 0x02 -#define PALMAS_DEV_CTRL_SW_RST_SHIFT 1 +#define PALMAS_DEV_CTRL_SW_RST_SHIFT 0x01 #define PALMAS_DEV_CTRL_DEV_ON 0x01 -#define PALMAS_DEV_CTRL_DEV_ON_SHIFT 0 +#define PALMAS_DEV_CTRL_DEV_ON_SHIFT 0x00 /* Bit definitions for POWER_CTRL */ #define PALMAS_POWER_CTRL_ENABLE2_MASK 0x04 -#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT 2 +#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT 0x02 #define PALMAS_POWER_CTRL_ENABLE1_MASK 0x02 -#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT 1 +#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT 0x01 #define PALMAS_POWER_CTRL_NSLEEP_MASK 0x01 -#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT 0 +#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT 0x00 /* Bit definitions for VSYS_LO */ -#define PALMAS_VSYS_LO_THRESHOLD_MASK 0x1f -#define PALMAS_VSYS_LO_THRESHOLD_SHIFT 0 +#define PALMAS_VSYS_LO_THRESHOLD_MASK 0x1F +#define PALMAS_VSYS_LO_THRESHOLD_SHIFT 0x00 /* Bit definitions for VSYS_MON */ #define PALMAS_VSYS_MON_ENABLE 0x80 -#define PALMAS_VSYS_MON_ENABLE_SHIFT 7 -#define PALMAS_VSYS_MON_THRESHOLD_MASK 0x3f -#define PALMAS_VSYS_MON_THRESHOLD_SHIFT 0 +#define PALMAS_VSYS_MON_ENABLE_SHIFT 0x07 +#define PALMAS_VSYS_MON_THRESHOLD_MASK 0x3F +#define PALMAS_VSYS_MON_THRESHOLD_SHIFT 0x00 /* Bit definitions for VBAT_MON */ #define PALMAS_VBAT_MON_ENABLE 0x80 -#define PALMAS_VBAT_MON_ENABLE_SHIFT 7 -#define PALMAS_VBAT_MON_THRESHOLD_MASK 0x3f -#define PALMAS_VBAT_MON_THRESHOLD_SHIFT 0 +#define PALMAS_VBAT_MON_ENABLE_SHIFT 0x07 +#define PALMAS_VBAT_MON_THRESHOLD_MASK 0x3F +#define PALMAS_VBAT_MON_THRESHOLD_SHIFT 0x00 /* Bit definitions for WATCHDOG */ #define PALMAS_WATCHDOG_LOCK 0x20 -#define PALMAS_WATCHDOG_LOCK_SHIFT 5 +#define PALMAS_WATCHDOG_LOCK_SHIFT 0x05 #define PALMAS_WATCHDOG_ENABLE 0x10 -#define PALMAS_WATCHDOG_ENABLE_SHIFT 4 +#define PALMAS_WATCHDOG_ENABLE_SHIFT 0x04 #define PALMAS_WATCHDOG_MODE 0x08 -#define PALMAS_WATCHDOG_MODE_SHIFT 3 +#define PALMAS_WATCHDOG_MODE_SHIFT 0x03 #define PALMAS_WATCHDOG_TIMER_MASK 0x07 -#define PALMAS_WATCHDOG_TIMER_SHIFT 0 +#define PALMAS_WATCHDOG_TIMER_SHIFT 0x00 /* Bit definitions for BOOT_STATUS */ #define PALMAS_BOOT_STATUS_BOOT1 0x02 -#define PALMAS_BOOT_STATUS_BOOT1_SHIFT 1 +#define PALMAS_BOOT_STATUS_BOOT1_SHIFT 0x01 #define PALMAS_BOOT_STATUS_BOOT0 0x01 -#define PALMAS_BOOT_STATUS_BOOT0_SHIFT 0 +#define PALMAS_BOOT_STATUS_BOOT0_SHIFT 0x00 /* Bit definitions for BATTERY_BOUNCE */ -#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK 0x3f -#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT 0 +#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK 0x3F +#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT 0x00 /* Bit definitions for BACKUP_BATTERY_CTRL */ #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15 0x80 -#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT 7 +#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT 0x07 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP 0x40 -#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT 6 +#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT 0x06 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF 0x20 -#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT 5 +#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT 0x05 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN 0x10 -#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT 4 +#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT 0x04 #define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG 0x08 -#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT 3 +#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT 0x03 #define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_MASK 0x06 -#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT 1 +#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT 0x01 #define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN 0x01 -#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT 0 +#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT 0x00 /* Bit definitions for LONG_PRESS_KEY */ #define PALMAS_LONG_PRESS_KEY_LPK_LOCK 0x80 -#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT 7 +#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT 0x07 #define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR 0x10 -#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT 4 +#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT 0x04 #define PALMAS_LONG_PRESS_KEY_LPK_TIME_MASK 0x0c -#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT 2 +#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT 0x02 #define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_MASK 0x03 -#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT 0 +#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT 0x00 /* Bit definitions for OSC_THERM_CTRL */ #define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP 0x80 -#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT 7 +#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT 0x07 #define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP 0x40 -#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT 6 +#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT 0x06 #define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP 0x20 -#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT 5 +#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT 0x05 #define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP 0x10 -#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT 4 +#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT 0x04 #define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_MASK 0x0c -#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT 2 +#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT 0x02 #define PALMAS_OSC_THERM_CTRL_OSC_BYPASS 0x02 -#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT 1 +#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT 0x01 #define PALMAS_OSC_THERM_CTRL_OSC_HPMODE 0x01 -#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT 0 +#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT 0x00 /* Bit definitions for BATDEBOUNCING */ #define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS 0x80 -#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT 7 +#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT 0x07 #define PALMAS_BATDEBOUNCING_BINS_DEB_MASK 0x78 -#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT 3 +#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT 0x03 #define PALMAS_BATDEBOUNCING_BEXT_DEB_MASK 0x07 -#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT 0 +#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT 0x00 /* Bit definitions for SWOFF_HWRST */ #define PALMAS_SWOFF_HWRST_PWRON_LPK 0x80 -#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT 7 +#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT 0x07 #define PALMAS_SWOFF_HWRST_PWRDOWN 0x40 -#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT 6 +#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT 0x06 #define PALMAS_SWOFF_HWRST_WTD 0x20 -#define PALMAS_SWOFF_HWRST_WTD_SHIFT 5 +#define PALMAS_SWOFF_HWRST_WTD_SHIFT 0x05 #define PALMAS_SWOFF_HWRST_TSHUT 0x10 -#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT 4 +#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT 0x04 #define PALMAS_SWOFF_HWRST_RESET_IN 0x08 -#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT 3 +#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT 0x03 #define PALMAS_SWOFF_HWRST_SW_RST 0x04 -#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT 2 +#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT 0x02 #define PALMAS_SWOFF_HWRST_VSYS_LO 0x02 -#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT 1 +#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT 0x01 #define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN 0x01 -#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT 0 +#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT 0x00 /* Bit definitions for SWOFF_COLDRST */ #define PALMAS_SWOFF_COLDRST_PWRON_LPK 0x80 -#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT 7 +#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT 0x07 #define PALMAS_SWOFF_COLDRST_PWRDOWN 0x40 -#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT 6 +#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT 0x06 #define PALMAS_SWOFF_COLDRST_WTD 0x20 -#define PALMAS_SWOFF_COLDRST_WTD_SHIFT 5 +#define PALMAS_SWOFF_COLDRST_WTD_SHIFT 0x05 #define PALMAS_SWOFF_COLDRST_TSHUT 0x10 -#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT 4 +#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT 0x04 #define PALMAS_SWOFF_COLDRST_RESET_IN 0x08 -#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT 3 +#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT 0x03 #define PALMAS_SWOFF_COLDRST_SW_RST 0x04 -#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT 2 +#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT 0x02 #define PALMAS_SWOFF_COLDRST_VSYS_LO 0x02 -#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT 1 +#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT 0x01 #define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN 0x01 -#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT 0 +#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT 0x00 /* Bit definitions for SWOFF_STATUS */ #define PALMAS_SWOFF_STATUS_PWRON_LPK 0x80 -#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT 7 +#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT 0x07 #define PALMAS_SWOFF_STATUS_PWRDOWN 0x40 -#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT 6 +#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT 0x06 #define PALMAS_SWOFF_STATUS_WTD 0x20 -#define PALMAS_SWOFF_STATUS_WTD_SHIFT 5 +#define PALMAS_SWOFF_STATUS_WTD_SHIFT 0x05 #define PALMAS_SWOFF_STATUS_TSHUT 0x10 -#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT 4 +#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT 0x04 #define PALMAS_SWOFF_STATUS_RESET_IN 0x08 -#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT 3 +#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT 0x03 #define PALMAS_SWOFF_STATUS_SW_RST 0x04 -#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT 2 +#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT 0x02 #define PALMAS_SWOFF_STATUS_VSYS_LO 0x02 -#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT 1 +#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT 0x01 #define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN 0x01 -#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT 0 +#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT 0x00 /* Bit definitions for PMU_CONFIG */ #define PALMAS_PMU_CONFIG_MULTI_CELL_EN 0x40 -#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT 6 +#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT 0x06 #define PALMAS_PMU_CONFIG_SPARE_MASK 0x30 -#define PALMAS_PMU_CONFIG_SPARE_SHIFT 4 +#define PALMAS_PMU_CONFIG_SPARE_SHIFT 0x04 #define PALMAS_PMU_CONFIG_SWOFF_DLY_MASK 0x0c -#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT 2 +#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT 0x02 #define PALMAS_PMU_CONFIG_GATE_RESET_OUT 0x02 -#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT 1 +#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT 0x01 #define PALMAS_PMU_CONFIG_AUTODEVON 0x01 -#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT 0 +#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT 0x00 /* Bit definitions for SPARE */ #define PALMAS_SPARE_SPARE_MASK 0xf8 -#define PALMAS_SPARE_SPARE_SHIFT 3 +#define PALMAS_SPARE_SPARE_SHIFT 0x03 #define PALMAS_SPARE_REGEN3_OD 0x04 -#define PALMAS_SPARE_REGEN3_OD_SHIFT 2 +#define PALMAS_SPARE_REGEN3_OD_SHIFT 0x02 #define PALMAS_SPARE_REGEN2_OD 0x02 -#define PALMAS_SPARE_REGEN2_OD_SHIFT 1 +#define PALMAS_SPARE_REGEN2_OD_SHIFT 0x01 #define PALMAS_SPARE_REGEN1_OD 0x01 -#define PALMAS_SPARE_REGEN1_OD_SHIFT 0 +#define PALMAS_SPARE_REGEN1_OD_SHIFT 0x00 /* Bit definitions for PMU_SECONDARY_INT */ #define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC 0x80 -#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT 7 +#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT 0x07 #define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC 0x40 -#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT 6 +#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT 0x06 #define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC 0x20 -#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT 5 +#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT 0x05 #define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC 0x10 -#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT 4 +#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT 0x04 #define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK 0x08 -#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT 3 +#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT 0x03 #define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK 0x04 -#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT 2 +#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT 0x02 #define PALMAS_PMU_SECONDARY_INT_BB_MASK 0x02 -#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT 1 +#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT 0x01 #define PALMAS_PMU_SECONDARY_INT_FBI_MASK 0x01 -#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT 0 +#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT 0x00 /* Bit definitions for SW_REVISION */ -#define PALMAS_SW_REVISION_SW_REVISION_MASK 0xff -#define PALMAS_SW_REVISION_SW_REVISION_SHIFT 0 +#define PALMAS_SW_REVISION_SW_REVISION_MASK 0xFF +#define PALMAS_SW_REVISION_SW_REVISION_SHIFT 0x00 /* Bit definitions for EXT_CHRG_CTRL */ #define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS 0x80 -#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT 7 +#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT 0x07 #define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS 0x40 -#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT 6 +#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT 0x06 #define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY 0x08 -#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT 3 +#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT 0x03 #define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N 0x04 -#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT 2 +#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT 0x02 #define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN 0x02 -#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT 1 +#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT 0x01 #define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN 0x01 -#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT 0 +#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT 0x00 /* Bit definitions for PMU_SECONDARY_INT2 */ #define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC 0x20 -#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT 5 +#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT 0x05 #define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC 0x10 -#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT 4 +#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT 0x04 #define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK 0x02 -#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT 1 +#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT 0x01 #define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK 0x01 -#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT 0 +#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT 0x00 /* Registers for function RESOURCE */ -#define PALMAS_CLK32KG_CTRL 0x0 -#define PALMAS_CLK32KGAUDIO_CTRL 0x1 -#define PALMAS_REGEN1_CTRL 0x2 -#define PALMAS_REGEN2_CTRL 0x3 -#define PALMAS_SYSEN1_CTRL 0x4 -#define PALMAS_SYSEN2_CTRL 0x5 -#define PALMAS_NSLEEP_RES_ASSIGN 0x6 -#define PALMAS_NSLEEP_SMPS_ASSIGN 0x7 -#define PALMAS_NSLEEP_LDO_ASSIGN1 0x8 -#define PALMAS_NSLEEP_LDO_ASSIGN2 0x9 -#define PALMAS_ENABLE1_RES_ASSIGN 0xA -#define PALMAS_ENABLE1_SMPS_ASSIGN 0xB -#define PALMAS_ENABLE1_LDO_ASSIGN1 0xC -#define PALMAS_ENABLE1_LDO_ASSIGN2 0xD -#define PALMAS_ENABLE2_RES_ASSIGN 0xE -#define PALMAS_ENABLE2_SMPS_ASSIGN 0xF +#define PALMAS_CLK32KG_CTRL 0x00 +#define PALMAS_CLK32KGAUDIO_CTRL 0x01 +#define PALMAS_REGEN1_CTRL 0x02 +#define PALMAS_REGEN2_CTRL 0x03 +#define PALMAS_SYSEN1_CTRL 0x04 +#define PALMAS_SYSEN2_CTRL 0x05 +#define PALMAS_NSLEEP_RES_ASSIGN 0x06 +#define PALMAS_NSLEEP_SMPS_ASSIGN 0x07 +#define PALMAS_NSLEEP_LDO_ASSIGN1 0x08 +#define PALMAS_NSLEEP_LDO_ASSIGN2 0x09 +#define PALMAS_ENABLE1_RES_ASSIGN 0x0A +#define PALMAS_ENABLE1_SMPS_ASSIGN 0x0B +#define PALMAS_ENABLE1_LDO_ASSIGN1 0x0C +#define PALMAS_ENABLE1_LDO_ASSIGN2 0x0D +#define PALMAS_ENABLE2_RES_ASSIGN 0x0E +#define PALMAS_ENABLE2_SMPS_ASSIGN 0x0F #define PALMAS_ENABLE2_LDO_ASSIGN1 0x10 #define PALMAS_ENABLE2_LDO_ASSIGN2 0x11 #define PALMAS_REGEN3_CTRL 0x12 /* Bit definitions for CLK32KG_CTRL */ #define PALMAS_CLK32KG_CTRL_STATUS 0x10 -#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT 4 +#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT 0x04 #define PALMAS_CLK32KG_CTRL_MODE_SLEEP 0x04 -#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_CLK32KG_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for CLK32KGAUDIO_CTRL */ #define PALMAS_CLK32KGAUDIO_CTRL_STATUS 0x10 -#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT 4 +#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT 0x04 #define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3 0x08 -#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT 3 +#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT 0x03 #define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP 0x04 -#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for REGEN1_CTRL */ #define PALMAS_REGEN1_CTRL_STATUS 0x10 -#define PALMAS_REGEN1_CTRL_STATUS_SHIFT 4 +#define PALMAS_REGEN1_CTRL_STATUS_SHIFT 0x04 #define PALMAS_REGEN1_CTRL_MODE_SLEEP 0x04 -#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_REGEN1_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for REGEN2_CTRL */ #define PALMAS_REGEN2_CTRL_STATUS 0x10 -#define PALMAS_REGEN2_CTRL_STATUS_SHIFT 4 +#define PALMAS_REGEN2_CTRL_STATUS_SHIFT 0x04 #define PALMAS_REGEN2_CTRL_MODE_SLEEP 0x04 -#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_REGEN2_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SYSEN1_CTRL */ #define PALMAS_SYSEN1_CTRL_STATUS 0x10 -#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT 4 +#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SYSEN1_CTRL_MODE_SLEEP 0x04 -#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SYSEN1_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for SYSEN2_CTRL */ #define PALMAS_SYSEN2_CTRL_STATUS 0x10 -#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT 4 +#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT 0x04 #define PALMAS_SYSEN2_CTRL_MODE_SLEEP 0x04 -#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_SYSEN2_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Bit definitions for NSLEEP_RES_ASSIGN */ #define PALMAS_NSLEEP_RES_ASSIGN_REGEN3 0x40 -#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT 6 +#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT 0x06 #define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO 0x20 -#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5 +#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT 0x05 #define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG 0x10 -#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT 4 +#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT 0x04 #define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2 0x08 -#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT 3 +#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT 0x03 #define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1 0x04 -#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT 2 +#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT 0x02 #define PALMAS_NSLEEP_RES_ASSIGN_REGEN2 0x02 -#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT 1 +#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT 0x01 #define PALMAS_NSLEEP_RES_ASSIGN_REGEN1 0x01 -#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT 0 +#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT 0x00 /* Bit definitions for NSLEEP_SMPS_ASSIGN */ #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10 0x80 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT 7 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT 0x07 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9 0x40 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT 6 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT 0x06 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8 0x20 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT 5 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT 0x05 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7 0x10 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT 4 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT 0x04 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6 0x08 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT 3 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT 0x03 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45 0x04 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT 2 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT 0x02 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3 0x02 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT 1 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT 0x01 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12 0x01 -#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT 0 +#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT 0x00 /* Bit definitions for NSLEEP_LDO_ASSIGN1 */ #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8 0x80 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT 7 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT 0x07 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7 0x40 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT 6 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT 0x06 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6 0x20 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT 5 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT 0x05 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5 0x10 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT 4 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT 0x04 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4 0x08 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT 3 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT 0x03 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3 0x04 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT 2 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT 0x02 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2 0x02 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT 1 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT 0x01 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1 0x01 -#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT 0 +#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT 0x00 /* Bit definitions for NSLEEP_LDO_ASSIGN2 */ #define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB 0x04 -#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT 2 +#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT 0x02 #define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN 0x02 -#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT 1 +#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT 0x01 #define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9 0x01 -#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT 0 +#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT 0x00 /* Bit definitions for ENABLE1_RES_ASSIGN */ #define PALMAS_ENABLE1_RES_ASSIGN_REGEN3 0x40 -#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT 6 +#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT 0x06 #define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO 0x20 -#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5 +#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT 0x05 #define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG 0x10 -#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT 4 +#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT 0x04 #define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2 0x08 -#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT 3 +#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT 0x03 #define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1 0x04 -#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT 2 +#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT 0x02 #define PALMAS_ENABLE1_RES_ASSIGN_REGEN2 0x02 -#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT 1 +#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT 0x01 #define PALMAS_ENABLE1_RES_ASSIGN_REGEN1 0x01 -#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT 0 +#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT 0x00 /* Bit definitions for ENABLE1_SMPS_ASSIGN */ #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10 0x80 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT 7 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT 0x07 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9 0x40 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT 6 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT 0x06 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8 0x20 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT 5 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT 0x05 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7 0x10 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT 4 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT 0x04 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6 0x08 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT 3 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT 0x03 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45 0x04 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT 2 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT 0x02 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3 0x02 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT 1 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT 0x01 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12 0x01 -#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT 0 +#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT 0x00 /* Bit definitions for ENABLE1_LDO_ASSIGN1 */ #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8 0x80 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT 7 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT 0x07 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7 0x40 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT 6 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT 0x06 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6 0x20 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT 5 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT 0x05 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5 0x10 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT 4 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT 0x04 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4 0x08 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT 3 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT 0x03 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3 0x04 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT 2 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT 0x02 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2 0x02 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT 1 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT 0x01 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1 0x01 -#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT 0 +#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT 0x00 /* Bit definitions for ENABLE1_LDO_ASSIGN2 */ #define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB 0x04 -#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT 2 +#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT 0x02 #define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN 0x02 -#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT 1 +#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT 0x01 #define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9 0x01 -#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT 0 +#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT 0x00 /* Bit definitions for ENABLE2_RES_ASSIGN */ #define PALMAS_ENABLE2_RES_ASSIGN_REGEN3 0x40 -#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT 6 +#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT 0x06 #define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO 0x20 -#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5 +#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT 0x05 #define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG 0x10 -#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT 4 +#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT 0x04 #define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2 0x08 -#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT 3 +#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT 0x03 #define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1 0x04 -#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT 2 +#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT 0x02 #define PALMAS_ENABLE2_RES_ASSIGN_REGEN2 0x02 -#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT 1 +#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT 0x01 #define PALMAS_ENABLE2_RES_ASSIGN_REGEN1 0x01 -#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT 0 +#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT 0x00 /* Bit definitions for ENABLE2_SMPS_ASSIGN */ #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10 0x80 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT 7 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT 0x07 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9 0x40 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT 6 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT 0x06 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8 0x20 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT 5 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT 0x05 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7 0x10 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT 4 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT 0x04 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6 0x08 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT 3 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT 0x03 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45 0x04 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT 2 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT 0x02 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3 0x02 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT 1 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT 0x01 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12 0x01 -#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT 0 +#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT 0x00 /* Bit definitions for ENABLE2_LDO_ASSIGN1 */ #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8 0x80 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT 7 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT 0x07 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7 0x40 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT 6 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT 0x06 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6 0x20 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT 5 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT 0x05 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5 0x10 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT 4 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT 0x04 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4 0x08 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT 3 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT 0x03 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3 0x04 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT 2 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT 0x02 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2 0x02 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT 1 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT 0x01 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1 0x01 -#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT 0 +#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT 0x00 /* Bit definitions for ENABLE2_LDO_ASSIGN2 */ #define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB 0x04 -#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT 2 +#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT 0x02 #define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN 0x02 -#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT 1 +#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT 0x01 #define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9 0x01 -#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT 0 +#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT 0x00 /* Bit definitions for REGEN3_CTRL */ #define PALMAS_REGEN3_CTRL_STATUS 0x10 -#define PALMAS_REGEN3_CTRL_STATUS_SHIFT 4 +#define PALMAS_REGEN3_CTRL_STATUS_SHIFT 0x04 #define PALMAS_REGEN3_CTRL_MODE_SLEEP 0x04 -#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT 2 +#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT 0x02 #define PALMAS_REGEN3_CTRL_MODE_ACTIVE 0x01 -#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0 +#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0x00 /* Registers for function PAD_CONTROL */ -#define PALMAS_OD_OUTPUT_CTRL2 0x2 -#define PALMAS_POLARITY_CTRL2 0x3 -#define PALMAS_PU_PD_INPUT_CTRL1 0x4 -#define PALMAS_PU_PD_INPUT_CTRL2 0x5 -#define PALMAS_PU_PD_INPUT_CTRL3 0x6 -#define PALMAS_PU_PD_INPUT_CTRL5 0x7 -#define PALMAS_OD_OUTPUT_CTRL 0x8 -#define PALMAS_POLARITY_CTRL 0x9 -#define PALMAS_PRIMARY_SECONDARY_PAD1 0xA -#define PALMAS_PRIMARY_SECONDARY_PAD2 0xB -#define PALMAS_I2C_SPI 0xC -#define PALMAS_PU_PD_INPUT_CTRL4 0xD -#define PALMAS_PRIMARY_SECONDARY_PAD3 0xE -#define PALMAS_PRIMARY_SECONDARY_PAD4 0xF +#define PALMAS_OD_OUTPUT_CTRL2 0x02 +#define PALMAS_POLARITY_CTRL2 0x03 +#define PALMAS_PU_PD_INPUT_CTRL1 0x04 +#define PALMAS_PU_PD_INPUT_CTRL2 0x05 +#define PALMAS_PU_PD_INPUT_CTRL3 0x06 +#define PALMAS_PU_PD_INPUT_CTRL5 0x07 +#define PALMAS_OD_OUTPUT_CTRL 0x08 +#define PALMAS_POLARITY_CTRL 0x09 +#define PALMAS_PRIMARY_SECONDARY_PAD1 0x0A +#define PALMAS_PRIMARY_SECONDARY_PAD2 0x0B +#define PALMAS_I2C_SPI 0x0C +#define PALMAS_PU_PD_INPUT_CTRL4 0x0D +#define PALMAS_PRIMARY_SECONDARY_PAD3 0x0E +#define PALMAS_PRIMARY_SECONDARY_PAD4 0x0F /* Bit definitions for PU_PD_INPUT_CTRL1 */ #define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD 0x40 -#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT 6 +#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT 0x06 #define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU 0x20 -#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT 5 +#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT 0x05 #define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD 0x10 -#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT 4 +#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT 0x04 #define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD 0x04 -#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT 2 +#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT 0x02 #define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU 0x02 -#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT 1 +#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT 0x01 /* Bit definitions for PU_PD_INPUT_CTRL2 */ #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU 0x20 -#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT 5 +#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT 0x05 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD 0x10 -#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT 4 +#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT 0x04 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU 0x08 -#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT 3 +#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT 0x03 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD 0x04 -#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT 2 +#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT 0x02 #define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU 0x02 -#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT 1 +#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT 0x01 #define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD 0x01 -#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT 0 +#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT 0x00 /* Bit definitions for PU_PD_INPUT_CTRL3 */ #define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD 0x40 -#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT 6 +#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT 0x06 #define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD 0x10 -#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT 4 +#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT 0x04 #define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD 0x04 -#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT 2 +#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT 0x02 #define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD 0x01 -#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT 0 +#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT 0x00 /* Bit definitions for OD_OUTPUT_CTRL */ #define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD 0x80 -#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT 7 +#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT 0x07 #define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD 0x40 -#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT 6 +#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT 0x06 #define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD 0x20 -#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT 5 +#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT 0x05 #define PALMAS_OD_OUTPUT_CTRL_INT_OD 0x08 -#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT 3 +#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT 0x03 /* Bit definitions for POLARITY_CTRL */ #define PALMAS_POLARITY_CTRL_INT_POLARITY 0x80 -#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT 7 +#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT 0x07 #define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY 0x40 -#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT 6 +#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT 0x06 #define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY 0x20 -#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT 5 +#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT 0x05 #define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY 0x10 -#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT 4 +#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT 0x04 #define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY 0x08 -#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT 3 +#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT 0x03 #define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY 0x04 -#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT 2 +#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT 0x02 #define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY 0x02 -#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT 1 +#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT 0x01 #define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY 0x01 -#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT 0 +#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT 0x00 /* Bit definitions for PRIMARY_SECONDARY_PAD1 */ #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3 0x80 -#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT 7 +#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT 0x07 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_MASK 0x60 -#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT 5 +#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT 0x05 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK 0x18 -#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT 3 +#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT 0x03 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0 0x04 -#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT 2 +#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT 0x02 #define PALMAS_PRIMARY_SECONDARY_PAD1_VAC 0x02 -#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT 1 +#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT 0x01 #define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD 0x01 -#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT 0 +#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT 0x00 /* Bit definitions for PRIMARY_SECONDARY_PAD2 */ #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK 0x30 -#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT 4 +#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT 0x04 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6 0x08 -#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT 3 +#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT 0x03 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_MASK 0x06 -#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT 1 +#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT 0x01 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4 0x01 -#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT 0 +#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT 0x00 /* Bit definitions for I2C_SPI */ #define PALMAS_I2C_SPI_I2C2OTP_EN 0x80 -#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT 7 +#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT 0x07 #define PALMAS_I2C_SPI_I2C2OTP_PAGESEL 0x40 -#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT 6 +#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT 0x06 #define PALMAS_I2C_SPI_ID_I2C2 0x20 -#define PALMAS_I2C_SPI_ID_I2C2_SHIFT 5 +#define PALMAS_I2C_SPI_ID_I2C2_SHIFT 0x05 #define PALMAS_I2C_SPI_I2C_SPI 0x10 -#define PALMAS_I2C_SPI_I2C_SPI_SHIFT 4 -#define PALMAS_I2C_SPI_ID_I2C1_MASK 0x0f -#define PALMAS_I2C_SPI_ID_I2C1_SHIFT 0 +#define PALMAS_I2C_SPI_I2C_SPI_SHIFT 0x04 +#define PALMAS_I2C_SPI_ID_I2C1_MASK 0x0F +#define PALMAS_I2C_SPI_ID_I2C1_SHIFT 0x00 /* Bit definitions for PU_PD_INPUT_CTRL4 */ #define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD 0x40 -#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT 6 +#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT 0x06 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD 0x10 -#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT 4 +#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT 0x04 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD 0x04 -#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT 2 +#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT 0x02 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD 0x01 -#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT 0 +#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT 0x00 /* Bit definitions for PRIMARY_SECONDARY_PAD3 */ #define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2 0x02 -#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT 1 +#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT 0x01 #define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1 0x01 -#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT 0 +#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT 0x00 /* Registers for function LED_PWM */ -#define PALMAS_LED_PERIOD_CTRL 0x0 -#define PALMAS_LED_CTRL 0x1 -#define PALMAS_PWM_CTRL1 0x2 -#define PALMAS_PWM_CTRL2 0x3 +#define PALMAS_LED_PERIOD_CTRL 0x00 +#define PALMAS_LED_CTRL 0x01 +#define PALMAS_PWM_CTRL1 0x02 +#define PALMAS_PWM_CTRL2 0x03 /* Bit definitions for LED_PERIOD_CTRL */ #define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_MASK 0x38 -#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT 3 +#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT 0x03 #define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_MASK 0x07 -#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT 0 +#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT 0x00 /* Bit definitions for LED_CTRL */ #define PALMAS_LED_CTRL_LED_2_SEQ 0x20 -#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT 5 +#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT 0x05 #define PALMAS_LED_CTRL_LED_1_SEQ 0x10 -#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT 4 +#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT 0x04 #define PALMAS_LED_CTRL_LED_2_ON_TIME_MASK 0x0c -#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT 2 +#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT 0x02 #define PALMAS_LED_CTRL_LED_1_ON_TIME_MASK 0x03 -#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT 0 +#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT 0x00 /* Bit definitions for PWM_CTRL1 */ #define PALMAS_PWM_CTRL1_PWM_FREQ_EN 0x02 -#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT 1 +#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT 0x01 #define PALMAS_PWM_CTRL1_PWM_FREQ_SEL 0x01 -#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT 0 +#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT 0x00 /* Bit definitions for PWM_CTRL2 */ -#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK 0xff -#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT 0 +#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK 0xFF +#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT 0x00 /* Registers for function INTERRUPT */ -#define PALMAS_INT1_STATUS 0x0 -#define PALMAS_INT1_MASK 0x1 -#define PALMAS_INT1_LINE_STATE 0x2 -#define PALMAS_INT1_EDGE_DETECT1_RESERVED 0x3 -#define PALMAS_INT1_EDGE_DETECT2_RESERVED 0x4 -#define PALMAS_INT2_STATUS 0x5 -#define PALMAS_INT2_MASK 0x6 -#define PALMAS_INT2_LINE_STATE 0x7 -#define PALMAS_INT2_EDGE_DETECT1_RESERVED 0x8 -#define PALMAS_INT2_EDGE_DETECT2_RESERVED 0x9 -#define PALMAS_INT3_STATUS 0xA -#define PALMAS_INT3_MASK 0xB -#define PALMAS_INT3_LINE_STATE 0xC -#define PALMAS_INT3_EDGE_DETECT1_RESERVED 0xD -#define PALMAS_INT3_EDGE_DETECT2_RESERVED 0xE -#define PALMAS_INT4_STATUS 0xF +#define PALMAS_INT1_STATUS 0x00 +#define PALMAS_INT1_MASK 0x01 +#define PALMAS_INT1_LINE_STATE 0x02 +#define PALMAS_INT1_EDGE_DETECT1_RESERVED 0x03 +#define PALMAS_INT1_EDGE_DETECT2_RESERVED 0x04 +#define PALMAS_INT2_STATUS 0x05 +#define PALMAS_INT2_MASK 0x06 +#define PALMAS_INT2_LINE_STATE 0x07 +#define PALMAS_INT2_EDGE_DETECT1_RESERVED 0x08 +#define PALMAS_INT2_EDGE_DETECT2_RESERVED 0x09 +#define PALMAS_INT3_STATUS 0x0A +#define PALMAS_INT3_MASK 0x0B +#define PALMAS_INT3_LINE_STATE 0x0C +#define PALMAS_INT3_EDGE_DETECT1_RESERVED 0x0D +#define PALMAS_INT3_EDGE_DETECT2_RESERVED 0x0E +#define PALMAS_INT4_STATUS 0x0F #define PALMAS_INT4_MASK 0x10 #define PALMAS_INT4_LINE_STATE 0x11 #define PALMAS_INT4_EDGE_DETECT1 0x12 @@ -1966,276 +1966,276 @@ enum usb_irq_events { /* Bit definitions for INT1_STATUS */ #define PALMAS_INT1_STATUS_VBAT_MON 0x80 -#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT 7 +#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT 0x07 #define PALMAS_INT1_STATUS_VSYS_MON 0x40 -#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT 6 +#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT 0x06 #define PALMAS_INT1_STATUS_HOTDIE 0x20 -#define PALMAS_INT1_STATUS_HOTDIE_SHIFT 5 +#define PALMAS_INT1_STATUS_HOTDIE_SHIFT 0x05 #define PALMAS_INT1_STATUS_PWRDOWN 0x10 -#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT 4 +#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT 0x04 #define PALMAS_INT1_STATUS_RPWRON 0x08 -#define PALMAS_INT1_STATUS_RPWRON_SHIFT 3 +#define PALMAS_INT1_STATUS_RPWRON_SHIFT 0x03 #define PALMAS_INT1_STATUS_LONG_PRESS_KEY 0x04 -#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT 2 +#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT 0x02 #define PALMAS_INT1_STATUS_PWRON 0x02 -#define PALMAS_INT1_STATUS_PWRON_SHIFT 1 +#define PALMAS_INT1_STATUS_PWRON_SHIFT 0x01 #define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV 0x01 -#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT 0 +#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT 0x00 /* Bit definitions for INT1_MASK */ #define PALMAS_INT1_MASK_VBAT_MON 0x80 -#define PALMAS_INT1_MASK_VBAT_MON_SHIFT 7 +#define PALMAS_INT1_MASK_VBAT_MON_SHIFT 0x07 #define PALMAS_INT1_MASK_VSYS_MON 0x40 -#define PALMAS_INT1_MASK_VSYS_MON_SHIFT 6 +#define PALMAS_INT1_MASK_VSYS_MON_SHIFT 0x06 #define PALMAS_INT1_MASK_HOTDIE 0x20 -#define PALMAS_INT1_MASK_HOTDIE_SHIFT 5 +#define PALMAS_INT1_MASK_HOTDIE_SHIFT 0x05 #define PALMAS_INT1_MASK_PWRDOWN 0x10 -#define PALMAS_INT1_MASK_PWRDOWN_SHIFT 4 +#define PALMAS_INT1_MASK_PWRDOWN_SHIFT 0x04 #define PALMAS_INT1_MASK_RPWRON 0x08 -#define PALMAS_INT1_MASK_RPWRON_SHIFT 3 +#define PALMAS_INT1_MASK_RPWRON_SHIFT 0x03 #define PALMAS_INT1_MASK_LONG_PRESS_KEY 0x04 -#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT 2 +#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT 0x02 #define PALMAS_INT1_MASK_PWRON 0x02 -#define PALMAS_INT1_MASK_PWRON_SHIFT 1 +#define PALMAS_INT1_MASK_PWRON_SHIFT 0x01 #define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV 0x01 -#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT 0 +#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT 0x00 /* Bit definitions for INT1_LINE_STATE */ #define PALMAS_INT1_LINE_STATE_VBAT_MON 0x80 -#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT 7 +#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT 0x07 #define PALMAS_INT1_LINE_STATE_VSYS_MON 0x40 -#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT 6 +#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT 0x06 #define PALMAS_INT1_LINE_STATE_HOTDIE 0x20 -#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT 5 +#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT 0x05 #define PALMAS_INT1_LINE_STATE_PWRDOWN 0x10 -#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT 4 +#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT 0x04 #define PALMAS_INT1_LINE_STATE_RPWRON 0x08 -#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT 3 +#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT 0x03 #define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY 0x04 -#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT 2 +#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT 0x02 #define PALMAS_INT1_LINE_STATE_PWRON 0x02 -#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT 1 +#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT 0x01 #define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV 0x01 -#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT 0 +#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT 0x00 /* Bit definitions for INT2_STATUS */ #define PALMAS_INT2_STATUS_VAC_ACOK 0x80 -#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT 7 +#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT 0x07 #define PALMAS_INT2_STATUS_SHORT 0x40 -#define PALMAS_INT2_STATUS_SHORT_SHIFT 6 +#define PALMAS_INT2_STATUS_SHORT_SHIFT 0x06 #define PALMAS_INT2_STATUS_FBI_BB 0x20 -#define PALMAS_INT2_STATUS_FBI_BB_SHIFT 5 +#define PALMAS_INT2_STATUS_FBI_BB_SHIFT 0x05 #define PALMAS_INT2_STATUS_RESET_IN 0x10 -#define PALMAS_INT2_STATUS_RESET_IN_SHIFT 4 +#define PALMAS_INT2_STATUS_RESET_IN_SHIFT 0x04 #define PALMAS_INT2_STATUS_BATREMOVAL 0x08 -#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT 3 +#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT 0x03 #define PALMAS_INT2_STATUS_WDT 0x04 -#define PALMAS_INT2_STATUS_WDT_SHIFT 2 +#define PALMAS_INT2_STATUS_WDT_SHIFT 0x02 #define PALMAS_INT2_STATUS_RTC_TIMER 0x02 -#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT 1 +#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT 0x01 #define PALMAS_INT2_STATUS_RTC_ALARM 0x01 -#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT 0 +#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT 0x00 /* Bit definitions for INT2_MASK */ #define PALMAS_INT2_MASK_VAC_ACOK 0x80 -#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT 7 +#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT 0x07 #define PALMAS_INT2_MASK_SHORT 0x40 -#define PALMAS_INT2_MASK_SHORT_SHIFT 6 +#define PALMAS_INT2_MASK_SHORT_SHIFT 0x06 #define PALMAS_INT2_MASK_FBI_BB 0x20 -#define PALMAS_INT2_MASK_FBI_BB_SHIFT 5 +#define PALMAS_INT2_MASK_FBI_BB_SHIFT 0x05 #define PALMAS_INT2_MASK_RESET_IN 0x10 -#define PALMAS_INT2_MASK_RESET_IN_SHIFT 4 +#define PALMAS_INT2_MASK_RESET_IN_SHIFT 0x04 #define PALMAS_INT2_MASK_BATREMOVAL 0x08 -#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT 3 +#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT 0x03 #define PALMAS_INT2_MASK_WDT 0x04 -#define PALMAS_INT2_MASK_WDT_SHIFT 2 +#define PALMAS_INT2_MASK_WDT_SHIFT 0x02 #define PALMAS_INT2_MASK_RTC_TIMER 0x02 -#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT 1 +#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT 0x01 #define PALMAS_INT2_MASK_RTC_ALARM 0x01 -#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT 0 +#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT 0x00 /* Bit definitions for INT2_LINE_STATE */ #define PALMAS_INT2_LINE_STATE_VAC_ACOK 0x80 -#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT 7 +#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT 0x07 #define PALMAS_INT2_LINE_STATE_SHORT 0x40 -#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT 6 +#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT 0x06 #define PALMAS_INT2_LINE_STATE_FBI_BB 0x20 -#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT 5 +#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT 0x05 #define PALMAS_INT2_LINE_STATE_RESET_IN 0x10 -#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT 4 +#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT 0x04 #define PALMAS_INT2_LINE_STATE_BATREMOVAL 0x08 -#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT 3 +#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT 0x03 #define PALMAS_INT2_LINE_STATE_WDT 0x04 -#define PALMAS_INT2_LINE_STATE_WDT_SHIFT 2 +#define PALMAS_INT2_LINE_STATE_WDT_SHIFT 0x02 #define PALMAS_INT2_LINE_STATE_RTC_TIMER 0x02 -#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT 1 +#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT 0x01 #define PALMAS_INT2_LINE_STATE_RTC_ALARM 0x01 -#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT 0 +#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT 0x00 /* Bit definitions for INT3_STATUS */ #define PALMAS_INT3_STATUS_VBUS 0x80 -#define PALMAS_INT3_STATUS_VBUS_SHIFT 7 +#define PALMAS_INT3_STATUS_VBUS_SHIFT 0x07 #define PALMAS_INT3_STATUS_VBUS_OTG 0x40 -#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT 6 +#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT 0x06 #define PALMAS_INT3_STATUS_ID 0x20 -#define PALMAS_INT3_STATUS_ID_SHIFT 5 +#define PALMAS_INT3_STATUS_ID_SHIFT 0x05 #define PALMAS_INT3_STATUS_ID_OTG 0x10 -#define PALMAS_INT3_STATUS_ID_OTG_SHIFT 4 +#define PALMAS_INT3_STATUS_ID_OTG_SHIFT 0x04 #define PALMAS_INT3_STATUS_GPADC_EOC_RT 0x08 -#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT 3 +#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT 0x03 #define PALMAS_INT3_STATUS_GPADC_EOC_SW 0x04 -#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT 2 +#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT 0x02 #define PALMAS_INT3_STATUS_GPADC_AUTO_1 0x02 -#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT 1 +#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT 0x01 #define PALMAS_INT3_STATUS_GPADC_AUTO_0 0x01 -#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT 0 +#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT 0x00 /* Bit definitions for INT3_MASK */ #define PALMAS_INT3_MASK_VBUS 0x80 -#define PALMAS_INT3_MASK_VBUS_SHIFT 7 +#define PALMAS_INT3_MASK_VBUS_SHIFT 0x07 #define PALMAS_INT3_MASK_VBUS_OTG 0x40 -#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT 6 +#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT 0x06 #define PALMAS_INT3_MASK_ID 0x20 -#define PALMAS_INT3_MASK_ID_SHIFT 5 +#define PALMAS_INT3_MASK_ID_SHIFT 0x05 #define PALMAS_INT3_MASK_ID_OTG 0x10 -#define PALMAS_INT3_MASK_ID_OTG_SHIFT 4 +#define PALMAS_INT3_MASK_ID_OTG_SHIFT 0x04 #define PALMAS_INT3_MASK_GPADC_EOC_RT 0x08 -#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT 3 +#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT 0x03 #define PALMAS_INT3_MASK_GPADC_EOC_SW 0x04 -#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT 2 +#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT 0x02 #define PALMAS_INT3_MASK_GPADC_AUTO_1 0x02 -#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT 1 +#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT 0x01 #define PALMAS_INT3_MASK_GPADC_AUTO_0 0x01 -#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT 0 +#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT 0x00 /* Bit definitions for INT3_LINE_STATE */ #define PALMAS_INT3_LINE_STATE_VBUS 0x80 -#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT 7 +#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT 0x07 #define PALMAS_INT3_LINE_STATE_VBUS_OTG 0x40 -#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT 6 +#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT 0x06 #define PALMAS_INT3_LINE_STATE_ID 0x20 -#define PALMAS_INT3_LINE_STATE_ID_SHIFT 5 +#define PALMAS_INT3_LINE_STATE_ID_SHIFT 0x05 #define PALMAS_INT3_LINE_STATE_ID_OTG 0x10 -#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT 4 +#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT 0x04 #define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT 0x08 -#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT 3 +#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT 0x03 #define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW 0x04 -#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT 2 +#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT 0x02 #define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1 0x02 -#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT 1 +#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT 0x01 #define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0 0x01 -#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT 0 +#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT 0x00 /* Bit definitions for INT4_STATUS */ #define PALMAS_INT4_STATUS_GPIO_7 0x80 -#define PALMAS_INT4_STATUS_GPIO_7_SHIFT 7 +#define PALMAS_INT4_STATUS_GPIO_7_SHIFT 0x07 #define PALMAS_INT4_STATUS_GPIO_6 0x40 -#define PALMAS_INT4_STATUS_GPIO_6_SHIFT 6 +#define PALMAS_INT4_STATUS_GPIO_6_SHIFT 0x06 #define PALMAS_INT4_STATUS_GPIO_5 0x20 -#define PALMAS_INT4_STATUS_GPIO_5_SHIFT 5 +#define PALMAS_INT4_STATUS_GPIO_5_SHIFT 0x05 #define PALMAS_INT4_STATUS_GPIO_4 0x10 -#define PALMAS_INT4_STATUS_GPIO_4_SHIFT 4 +#define PALMAS_INT4_STATUS_GPIO_4_SHIFT 0x04 #define PALMAS_INT4_STATUS_GPIO_3 0x08 -#define PALMAS_INT4_STATUS_GPIO_3_SHIFT 3 +#define PALMAS_INT4_STATUS_GPIO_3_SHIFT 0x03 #define PALMAS_INT4_STATUS_GPIO_2 0x04 -#define PALMAS_INT4_STATUS_GPIO_2_SHIFT 2 +#define PALMAS_INT4_STATUS_GPIO_2_SHIFT 0x02 #define PALMAS_INT4_STATUS_GPIO_1 0x02 -#define PALMAS_INT4_STATUS_GPIO_1_SHIFT 1 +#define PALMAS_INT4_STATUS_GPIO_1_SHIFT 0x01 #define PALMAS_INT4_STATUS_GPIO_0 0x01 -#define PALMAS_INT4_STATUS_GPIO_0_SHIFT 0 +#define PALMAS_INT4_STATUS_GPIO_0_SHIFT 0x00 /* Bit definitions for INT4_MASK */ #define PALMAS_INT4_MASK_GPIO_7 0x80 -#define PALMAS_INT4_MASK_GPIO_7_SHIFT 7 +#define PALMAS_INT4_MASK_GPIO_7_SHIFT 0x07 #define PALMAS_INT4_MASK_GPIO_6 0x40 -#define PALMAS_INT4_MASK_GPIO_6_SHIFT 6 +#define PALMAS_INT4_MASK_GPIO_6_SHIFT 0x06 #define PALMAS_INT4_MASK_GPIO_5 0x20 -#define PALMAS_INT4_MASK_GPIO_5_SHIFT 5 +#define PALMAS_INT4_MASK_GPIO_5_SHIFT 0x05 #define PALMAS_INT4_MASK_GPIO_4 0x10 -#define PALMAS_INT4_MASK_GPIO_4_SHIFT 4 +#define PALMAS_INT4_MASK_GPIO_4_SHIFT 0x04 #define PALMAS_INT4_MASK_GPIO_3 0x08 -#define PALMAS_INT4_MASK_GPIO_3_SHIFT 3 +#define PALMAS_INT4_MASK_GPIO_3_SHIFT 0x03 #define PALMAS_INT4_MASK_GPIO_2 0x04 -#define PALMAS_INT4_MASK_GPIO_2_SHIFT 2 +#define PALMAS_INT4_MASK_GPIO_2_SHIFT 0x02 #define PALMAS_INT4_MASK_GPIO_1 0x02 -#define PALMAS_INT4_MASK_GPIO_1_SHIFT 1 +#define PALMAS_INT4_MASK_GPIO_1_SHIFT 0x01 #define PALMAS_INT4_MASK_GPIO_0 0x01 -#define PALMAS_INT4_MASK_GPIO_0_SHIFT 0 +#define PALMAS_INT4_MASK_GPIO_0_SHIFT 0x00 /* Bit definitions for INT4_LINE_STATE */ #define PALMAS_INT4_LINE_STATE_GPIO_7 0x80 -#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT 7 +#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT 0x07 #define PALMAS_INT4_LINE_STATE_GPIO_6 0x40 -#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT 6 +#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT 0x06 #define PALMAS_INT4_LINE_STATE_GPIO_5 0x20 -#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT 5 +#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT 0x05 #define PALMAS_INT4_LINE_STATE_GPIO_4 0x10 -#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT 4 +#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT 0x04 #define PALMAS_INT4_LINE_STATE_GPIO_3 0x08 -#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT 3 +#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT 0x03 #define PALMAS_INT4_LINE_STATE_GPIO_2 0x04 -#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT 2 +#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT 0x02 #define PALMAS_INT4_LINE_STATE_GPIO_1 0x02 -#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT 1 +#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT 0x01 #define PALMAS_INT4_LINE_STATE_GPIO_0 0x01 -#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT 0 +#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT 0x00 /* Bit definitions for INT4_EDGE_DETECT1 */ #define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING 0x80 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT 7 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT 0x07 #define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING 0x40 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT 6 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT 0x06 #define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING 0x20 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT 5 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT 0x05 #define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING 0x10 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT 4 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT 0x04 #define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING 0x08 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT 3 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT 0x03 #define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING 0x04 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT 2 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT 0x02 #define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING 0x02 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT 1 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT 0x01 #define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING 0x01 -#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT 0 +#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT 0x00 /* Bit definitions for INT4_EDGE_DETECT2 */ #define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING 0x80 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT 7 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT 0x07 #define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING 0x40 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT 6 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT 0x06 #define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING 0x20 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT 5 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT 0x05 #define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING 0x10 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT 4 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT 0x04 #define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING 0x08 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT 3 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT 0x03 #define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING 0x04 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT 2 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT 0x02 #define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING 0x02 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT 1 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT 0x01 #define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING 0x01 -#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT 0 +#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT 0x00 /* Bit definitions for INT_CTRL */ #define PALMAS_INT_CTRL_INT_PENDING 0x04 -#define PALMAS_INT_CTRL_INT_PENDING_SHIFT 2 +#define PALMAS_INT_CTRL_INT_PENDING_SHIFT 0x02 #define PALMAS_INT_CTRL_INT_CLEAR 0x01 -#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT 0 +#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT 0x00 /* Registers for function USB_OTG */ -#define PALMAS_USB_WAKEUP 0x3 -#define PALMAS_USB_VBUS_CTRL_SET 0x4 -#define PALMAS_USB_VBUS_CTRL_CLR 0x5 -#define PALMAS_USB_ID_CTRL_SET 0x6 -#define PALMAS_USB_ID_CTRL_CLEAR 0x7 -#define PALMAS_USB_VBUS_INT_SRC 0x8 -#define PALMAS_USB_VBUS_INT_LATCH_SET 0x9 -#define PALMAS_USB_VBUS_INT_LATCH_CLR 0xA -#define PALMAS_USB_VBUS_INT_EN_LO_SET 0xB -#define PALMAS_USB_VBUS_INT_EN_LO_CLR 0xC -#define PALMAS_USB_VBUS_INT_EN_HI_SET 0xD -#define PALMAS_USB_VBUS_INT_EN_HI_CLR 0xE -#define PALMAS_USB_ID_INT_SRC 0xF +#define PALMAS_USB_WAKEUP 0x03 +#define PALMAS_USB_VBUS_CTRL_SET 0x04 +#define PALMAS_USB_VBUS_CTRL_CLR 0x05 +#define PALMAS_USB_ID_CTRL_SET 0x06 +#define PALMAS_USB_ID_CTRL_CLEAR 0x07 +#define PALMAS_USB_VBUS_INT_SRC 0x08 +#define PALMAS_USB_VBUS_INT_LATCH_SET 0x09 +#define PALMAS_USB_VBUS_INT_LATCH_CLR 0x0A +#define PALMAS_USB_VBUS_INT_EN_LO_SET 0x0B +#define PALMAS_USB_VBUS_INT_EN_LO_CLR 0x0C +#define PALMAS_USB_VBUS_INT_EN_HI_SET 0x0D +#define PALMAS_USB_VBUS_INT_EN_HI_CLR 0x0E +#define PALMAS_USB_ID_INT_SRC 0x0F #define PALMAS_USB_ID_INT_LATCH_SET 0x10 #define PALMAS_USB_ID_INT_LATCH_CLR 0x11 #define PALMAS_USB_ID_INT_EN_LO_SET 0x12 @@ -2250,306 +2250,306 @@ enum usb_irq_events { /* Bit definitions for USB_WAKEUP */ #define PALMAS_USB_WAKEUP_ID_WK_UP_COMP 0x01 -#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT 0 +#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT 0x00 /* Bit definitions for USB_VBUS_CTRL_SET */ #define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS 0x80 -#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT 7 +#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT 0x07 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG 0x20 -#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT 5 +#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT 0x05 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC 0x10 -#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT 4 +#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT 0x04 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK 0x08 -#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT 3 +#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT 0x03 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP 0x04 -#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT 2 +#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT 0x02 /* Bit definitions for USB_VBUS_CTRL_CLR */ #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS 0x80 -#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT 7 +#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT 0x07 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG 0x20 -#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT 5 +#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT 0x05 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC 0x10 -#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT 4 +#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT 0x04 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK 0x08 -#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT 3 +#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT 0x03 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP 0x04 -#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT 2 +#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT 0x02 /* Bit definitions for USB_ID_CTRL_SET */ #define PALMAS_USB_ID_CTRL_SET_ID_PU_220K 0x80 -#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT 7 +#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT 0x07 #define PALMAS_USB_ID_CTRL_SET_ID_PU_100K 0x40 -#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT 6 +#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT 0x06 #define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV 0x20 -#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT 5 +#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT 0x05 #define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U 0x10 -#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT 4 +#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT 0x04 #define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U 0x08 -#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT 3 +#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT 0x03 #define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP 0x04 -#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT 2 +#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT 0x02 /* Bit definitions for USB_ID_CTRL_CLEAR */ #define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K 0x80 -#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT 7 +#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT 0x07 #define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K 0x40 -#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT 6 +#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT 0x06 #define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV 0x20 -#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT 5 +#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT 0x05 #define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U 0x10 -#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT 4 +#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT 0x04 #define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U 0x08 -#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT 3 +#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT 0x03 #define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP 0x04 -#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT 2 +#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT 0x02 /* Bit definitions for USB_VBUS_INT_SRC */ #define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_SRC_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_SRC_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_VBUS_INT_LATCH_SET */ #define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_LATCH_SET_ADP 0x10 -#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT 4 +#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT 0x04 #define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_VBUS_INT_LATCH_CLR */ #define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP 0x10 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT 4 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT 0x04 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_VBUS_INT_EN_LO_SET */ #define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_VBUS_INT_EN_LO_CLR */ #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_VBUS_INT_EN_HI_SET */ #define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP 0x10 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT 4 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT 0x04 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_VBUS_INT_EN_HI_CLR */ #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD 0x80 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT 7 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT 0x07 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB 0x40 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT 6 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT 0x06 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS 0x20 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT 5 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT 0x05 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP 0x10 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT 4 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT 0x04 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD 0x08 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT 3 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT 0x03 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD 0x04 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT 2 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT 0x02 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD 0x02 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT 1 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT 0x01 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END 0x01 -#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT 0 +#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT 0x00 /* Bit definitions for USB_ID_INT_SRC */ #define PALMAS_USB_ID_INT_SRC_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_SRC_ID_A 0x08 -#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_SRC_ID_B 0x04 -#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_SRC_ID_C 0x02 -#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_SRC_ID_GND 0x01 -#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT 0x00 /* Bit definitions for USB_ID_INT_LATCH_SET */ #define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_LATCH_SET_ID_A 0x08 -#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_LATCH_SET_ID_B 0x04 -#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_LATCH_SET_ID_C 0x02 -#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_LATCH_SET_ID_GND 0x01 -#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT 0x00 /* Bit definitions for USB_ID_INT_LATCH_CLR */ #define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_A 0x08 -#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_B 0x04 -#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_C 0x02 -#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND 0x01 -#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT 0x00 /* Bit definitions for USB_ID_INT_EN_LO_SET */ #define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_A 0x08 -#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_B 0x04 -#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_C 0x02 -#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND 0x01 -#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT 0x00 /* Bit definitions for USB_ID_INT_EN_LO_CLR */ #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A 0x08 -#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B 0x04 -#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C 0x02 -#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND 0x01 -#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT 0x00 /* Bit definitions for USB_ID_INT_EN_HI_SET */ #define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_A 0x08 -#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_B 0x04 -#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_C 0x02 -#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND 0x01 -#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT 0x00 /* Bit definitions for USB_ID_INT_EN_HI_CLR */ #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT 0x10 -#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT 4 +#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT 0x04 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A 0x08 -#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT 3 +#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT 0x03 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B 0x04 -#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT 2 +#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT 0x02 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C 0x02 -#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT 1 +#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT 0x01 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND 0x01 -#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT 0 +#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT 0x00 /* Bit definitions for USB_OTG_ADP_CTRL */ #define PALMAS_USB_OTG_ADP_CTRL_ADP_EN 0x04 -#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT 2 +#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT 0x02 #define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_MASK 0x03 -#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT 0 +#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT 0x00 /* Bit definitions for USB_OTG_ADP_HIGH */ -#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK 0xff -#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT 0 +#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK 0xFF +#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT 0x00 /* Bit definitions for USB_OTG_ADP_LOW */ -#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK 0xff -#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT 0 +#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK 0xFF +#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT 0x00 /* Bit definitions for USB_OTG_ADP_RISE */ -#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK 0xff -#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT 0 +#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK 0xFF +#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT 0x00 /* Bit definitions for USB_OTG_REVISION */ #define PALMAS_USB_OTG_REVISION_OTG_REV 0x01 -#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT 0 +#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT 0x00 /* Registers for function VIBRATOR */ -#define PALMAS_VIBRA_CTRL 0x0 +#define PALMAS_VIBRA_CTRL 0x00 /* Bit definitions for VIBRA_CTRL */ #define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_MASK 0x06 -#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT 1 +#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT 0x01 #define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL 0x01 -#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT 0 +#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT 0x00 /* Registers for function GPIO */ -#define PALMAS_GPIO_DATA_IN 0x0 -#define PALMAS_GPIO_DATA_DIR 0x1 -#define PALMAS_GPIO_DATA_OUT 0x2 -#define PALMAS_GPIO_DEBOUNCE_EN 0x3 -#define PALMAS_GPIO_CLEAR_DATA_OUT 0x4 -#define PALMAS_GPIO_SET_DATA_OUT 0x5 -#define PALMAS_PU_PD_GPIO_CTRL1 0x6 -#define PALMAS_PU_PD_GPIO_CTRL2 0x7 -#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x8 -#define PALMAS_GPIO_DATA_IN2 0x9 +#define PALMAS_GPIO_DATA_IN 0x00 +#define PALMAS_GPIO_DATA_DIR 0x01 +#define PALMAS_GPIO_DATA_OUT 0x02 +#define PALMAS_GPIO_DEBOUNCE_EN 0x03 +#define PALMAS_GPIO_CLEAR_DATA_OUT 0x04 +#define PALMAS_GPIO_SET_DATA_OUT 0x05 +#define PALMAS_PU_PD_GPIO_CTRL1 0x06 +#define PALMAS_PU_PD_GPIO_CTRL2 0x07 +#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x08 +#define PALMAS_GPIO_DATA_IN2 0x09 #define PALMAS_GPIO_DATA_DIR2 0x0A #define PALMAS_GPIO_DATA_OUT2 0x0B #define PALMAS_GPIO_DEBOUNCE_EN2 0x0C @@ -2561,167 +2561,167 @@ enum usb_irq_events { /* Bit definitions for GPIO_DATA_IN */ #define PALMAS_GPIO_DATA_IN_GPIO_7_IN 0x80 -#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT 7 +#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT 0x07 #define PALMAS_GPIO_DATA_IN_GPIO_6_IN 0x40 -#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT 6 +#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT 0x06 #define PALMAS_GPIO_DATA_IN_GPIO_5_IN 0x20 -#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT 5 +#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT 0x05 #define PALMAS_GPIO_DATA_IN_GPIO_4_IN 0x10 -#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT 4 +#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT 0x04 #define PALMAS_GPIO_DATA_IN_GPIO_3_IN 0x08 -#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT 3 +#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT 0x03 #define PALMAS_GPIO_DATA_IN_GPIO_2_IN 0x04 -#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT 2 +#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT 0x02 #define PALMAS_GPIO_DATA_IN_GPIO_1_IN 0x02 -#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT 1 +#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT 0x01 #define PALMAS_GPIO_DATA_IN_GPIO_0_IN 0x01 -#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT 0 +#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT 0x00 /* Bit definitions for GPIO_DATA_DIR */ #define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR 0x80 -#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT 7 +#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT 0x07 #define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR 0x40 -#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT 6 +#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT 0x06 #define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR 0x20 -#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT 5 +#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT 0x05 #define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR 0x10 -#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT 4 +#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT 0x04 #define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR 0x08 -#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT 3 +#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT 0x03 #define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR 0x04 -#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT 2 +#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT 0x02 #define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR 0x02 -#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT 1 +#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT 0x01 #define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR 0x01 -#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT 0 +#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT 0x00 /* Bit definitions for GPIO_DATA_OUT */ #define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT 0x80 -#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT 7 +#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT 0x07 #define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT 0x40 -#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT 6 +#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT 0x06 #define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT 0x20 -#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT 5 +#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT 0x05 #define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT 0x10 -#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT 4 +#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT 0x04 #define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT 0x08 -#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT 3 +#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT 0x03 #define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT 0x04 -#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT 2 +#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT 0x02 #define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT 0x02 -#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT 1 +#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT 0x01 #define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT 0x01 -#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT 0 +#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT 0x00 /* Bit definitions for GPIO_DEBOUNCE_EN */ #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN 0x80 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT 7 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT 0x07 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN 0x40 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT 6 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT 0x06 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN 0x20 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT 5 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT 0x05 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN 0x10 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT 4 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT 0x04 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN 0x08 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT 3 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT 0x03 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN 0x04 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT 2 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT 0x02 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN 0x02 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT 1 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT 0x01 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN 0x01 -#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT 0 +#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT 0x00 /* Bit definitions for GPIO_CLEAR_DATA_OUT */ #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT 0x80 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT 7 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT 0x07 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT 0x40 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT 6 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT 0x06 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT 0x20 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT 5 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT 0x05 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT 0x10 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT 4 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT 0x04 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT 0x08 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT 3 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT 0x03 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT 0x04 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT 2 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT 0x02 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT 0x02 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT 1 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT 0x01 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT 0x01 -#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT 0 +#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT 0x00 /* Bit definitions for GPIO_SET_DATA_OUT */ #define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT 0x80 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT 7 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT 0x07 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT 0x40 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT 6 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT 0x06 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT 0x20 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT 5 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT 0x05 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT 0x10 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT 4 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT 0x04 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT 0x08 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT 3 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT 0x03 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT 0x04 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT 2 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT 0x02 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT 0x02 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT 1 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT 0x01 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT 0x01 -#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT 0 +#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT 0x00 /* Bit definitions for PU_PD_GPIO_CTRL1 */ #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD 0x40 -#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT 6 +#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT 0x06 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU 0x20 -#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT 5 +#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT 0x05 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD 0x10 -#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT 4 +#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT 0x04 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU 0x08 -#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT 3 +#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT 0x03 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD 0x04 -#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT 2 +#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT 0x02 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD 0x01 -#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT 0 +#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT 0x00 /* Bit definitions for PU_PD_GPIO_CTRL2 */ #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD 0x40 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT 6 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT 0x06 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU 0x20 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT 5 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT 0x05 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD 0x10 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT 4 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT 0x04 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU 0x08 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT 3 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT 0x03 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD 0x04 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT 2 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT 0x02 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU 0x02 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT 1 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT 0x01 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD 0x01 -#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT 0 +#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT 0x00 /* Bit definitions for OD_OUTPUT_GPIO_CTRL */ #define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD 0x20 -#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT 5 +#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT 0x05 #define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD 0x04 -#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT 2 +#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT 0x02 #define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD 0x02 -#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT 1 +#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT 0x01 /* Registers for function GPADC */ -#define PALMAS_GPADC_CTRL1 0x0 -#define PALMAS_GPADC_CTRL2 0x1 -#define PALMAS_GPADC_RT_CTRL 0x2 -#define PALMAS_GPADC_AUTO_CTRL 0x3 -#define PALMAS_GPADC_STATUS 0x4 -#define PALMAS_GPADC_RT_SELECT 0x5 -#define PALMAS_GPADC_RT_CONV0_LSB 0x6 -#define PALMAS_GPADC_RT_CONV0_MSB 0x7 -#define PALMAS_GPADC_AUTO_SELECT 0x8 -#define PALMAS_GPADC_AUTO_CONV0_LSB 0x9 -#define PALMAS_GPADC_AUTO_CONV0_MSB 0xA -#define PALMAS_GPADC_AUTO_CONV1_LSB 0xB -#define PALMAS_GPADC_AUTO_CONV1_MSB 0xC -#define PALMAS_GPADC_SW_SELECT 0xD -#define PALMAS_GPADC_SW_CONV0_LSB 0xE -#define PALMAS_GPADC_SW_CONV0_MSB 0xF +#define PALMAS_GPADC_CTRL1 0x00 +#define PALMAS_GPADC_CTRL2 0x01 +#define PALMAS_GPADC_RT_CTRL 0x02 +#define PALMAS_GPADC_AUTO_CTRL 0x03 +#define PALMAS_GPADC_STATUS 0x04 +#define PALMAS_GPADC_RT_SELECT 0x05 +#define PALMAS_GPADC_RT_CONV0_LSB 0x06 +#define PALMAS_GPADC_RT_CONV0_MSB 0x07 +#define PALMAS_GPADC_AUTO_SELECT 0x08 +#define PALMAS_GPADC_AUTO_CONV0_LSB 0x09 +#define PALMAS_GPADC_AUTO_CONV0_MSB 0x0A +#define PALMAS_GPADC_AUTO_CONV1_LSB 0x0B +#define PALMAS_GPADC_AUTO_CONV1_MSB 0x0C +#define PALMAS_GPADC_SW_SELECT 0x0D +#define PALMAS_GPADC_SW_CONV0_LSB 0x0E +#define PALMAS_GPADC_SW_CONV0_MSB 0x0F #define PALMAS_GPADC_THRES_CONV0_LSB 0x10 #define PALMAS_GPADC_THRES_CONV0_MSB 0x11 #define PALMAS_GPADC_THRES_CONV1_LSB 0x12 @@ -2731,150 +2731,150 @@ enum usb_irq_events { /* Bit definitions for GPADC_CTRL1 */ #define PALMAS_GPADC_CTRL1_RESERVED_MASK 0xc0 -#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT 6 +#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT 0x06 #define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK 0x30 -#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT 4 +#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT 0x04 #define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK 0x0c -#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT 2 +#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT 0x02 #define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET 0x02 -#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT 1 +#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT 0x01 #define PALMAS_GPADC_CTRL1_GPADC_FORCE 0x01 -#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT 0 +#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT 0x00 /* Bit definitions for GPADC_CTRL2 */ #define PALMAS_GPADC_CTRL2_RESERVED_MASK 0x06 -#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT 1 +#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT 0x01 /* Bit definitions for GPADC_RT_CTRL */ #define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY 0x02 -#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT 1 +#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT 0x01 #define PALMAS_GPADC_RT_CTRL_START_POLARITY 0x01 -#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT 0 +#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT 0x00 /* Bit definitions for GPADC_AUTO_CTRL */ #define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 0x80 -#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT 7 +#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT 0x07 #define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0 0x40 -#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT 6 +#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT 0x06 #define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN 0x20 -#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT 5 +#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT 0x05 #define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN 0x10 -#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT 4 -#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK 0x0f -#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT 0 +#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT 0x04 +#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK 0x0F +#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT 0x00 /* Bit definitions for GPADC_STATUS */ #define PALMAS_GPADC_STATUS_GPADC_AVAILABLE 0x10 -#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT 4 +#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT 0x04 /* Bit definitions for GPADC_RT_SELECT */ #define PALMAS_GPADC_RT_SELECT_RT_CONV_EN 0x80 -#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT 7 -#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK 0x0f -#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT 0 +#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT 0x07 +#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK 0x0F +#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT 0x00 /* Bit definitions for GPADC_RT_CONV0_LSB */ -#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK 0xff -#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT 0 +#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK 0xFF +#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT 0x00 /* Bit definitions for GPADC_RT_CONV0_MSB */ -#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK 0x0f -#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT 0 +#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK 0x0F +#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT 0x00 /* Bit definitions for GPADC_AUTO_SELECT */ -#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK 0xf0 -#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT 4 -#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK 0x0f -#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT 0 +#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK 0xF0 +#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT 0x04 +#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK 0x0F +#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT 0x00 /* Bit definitions for GPADC_AUTO_CONV0_LSB */ -#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK 0xff -#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT 0 +#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK 0xFF +#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT 0x00 /* Bit definitions for GPADC_AUTO_CONV0_MSB */ -#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK 0x0f -#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT 0 +#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK 0x0F +#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT 0x00 /* Bit definitions for GPADC_AUTO_CONV1_LSB */ -#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK 0xff -#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT 0 +#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK 0xFF +#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT 0x00 /* Bit definitions for GPADC_AUTO_CONV1_MSB */ -#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK 0x0f -#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT 0 +#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK 0x0F +#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT 0x00 /* Bit definitions for GPADC_SW_SELECT */ #define PALMAS_GPADC_SW_SELECT_SW_CONV_EN 0x80 -#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT 7 +#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT 0x07 #define PALMAS_GPADC_SW_SELECT_SW_START_CONV0 0x10 -#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT 4 -#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK 0x0f -#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT 0 +#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT 0x04 +#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK 0x0F +#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT 0x00 /* Bit definitions for GPADC_SW_CONV0_LSB */ -#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK 0xff -#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT 0 +#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK 0xFF +#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT 0x00 /* Bit definitions for GPADC_SW_CONV0_MSB */ -#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK 0x0f -#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT 0 +#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK 0x0F +#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT 0x00 /* Bit definitions for GPADC_THRES_CONV0_LSB */ -#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK 0xff -#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT 0 +#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK 0xFF +#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT 0x00 /* Bit definitions for GPADC_THRES_CONV0_MSB */ #define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL 0x80 -#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT 7 -#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK 0x0f -#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT 0 +#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT 0x07 +#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK 0x0F +#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT 0x00 /* Bit definitions for GPADC_THRES_CONV1_LSB */ -#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK 0xff -#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT 0 +#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK 0xFF +#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT 0x00 /* Bit definitions for GPADC_THRES_CONV1_MSB */ #define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL 0x80 -#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT 7 -#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK 0x0f -#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT 0 +#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT 0x07 +#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK 0x0F +#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT 0x00 /* Bit definitions for GPADC_SMPS_ILMONITOR_EN */ #define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN 0x20 -#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT 5 +#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT 0x05 #define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT 0x10 -#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT 4 -#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK 0x0f -#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT 0 +#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT 0x04 +#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK 0x0F +#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT 0x00 /* Bit definitions for GPADC_SMPS_VSEL_MONITORING */ #define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE 0x80 -#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT 7 -#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK 0x7f -#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT 0 +#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT 0x07 +#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK 0x7F +#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT 0x00 /* Registers for function GPADC */ -#define PALMAS_GPADC_TRIM1 0x0 -#define PALMAS_GPADC_TRIM2 0x1 -#define PALMAS_GPADC_TRIM3 0x2 -#define PALMAS_GPADC_TRIM4 0x3 -#define PALMAS_GPADC_TRIM5 0x4 -#define PALMAS_GPADC_TRIM6 0x5 -#define PALMAS_GPADC_TRIM7 0x6 -#define PALMAS_GPADC_TRIM8 0x7 -#define PALMAS_GPADC_TRIM9 0x8 -#define PALMAS_GPADC_TRIM10 0x9 -#define PALMAS_GPADC_TRIM11 0xA -#define PALMAS_GPADC_TRIM12 0xB -#define PALMAS_GPADC_TRIM13 0xC -#define PALMAS_GPADC_TRIM14 0xD -#define PALMAS_GPADC_TRIM15 0xE -#define PALMAS_GPADC_TRIM16 0xF +#define PALMAS_GPADC_TRIM1 0x00 +#define PALMAS_GPADC_TRIM2 0x01 +#define PALMAS_GPADC_TRIM3 0x02 +#define PALMAS_GPADC_TRIM4 0x03 +#define PALMAS_GPADC_TRIM5 0x04 +#define PALMAS_GPADC_TRIM6 0x05 +#define PALMAS_GPADC_TRIM7 0x06 +#define PALMAS_GPADC_TRIM8 0x07 +#define PALMAS_GPADC_TRIM9 0x08 +#define PALMAS_GPADC_TRIM10 0x09 +#define PALMAS_GPADC_TRIM11 0x0A +#define PALMAS_GPADC_TRIM12 0x0B +#define PALMAS_GPADC_TRIM13 0x0C +#define PALMAS_GPADC_TRIM14 0x0D +#define PALMAS_GPADC_TRIM15 0x0E +#define PALMAS_GPADC_TRIM16 0x0F static inline int palmas_read(struct palmas *palmas, unsigned int base, unsigned int reg, unsigned int *val) { - unsigned int addr = PALMAS_BASE_TO_REG(base, reg); + unsigned int addr = PALMAS_BASE_TO_REG(base, reg); int slave_id = PALMAS_BASE_TO_SLAVE(base); return regmap_read(palmas->regmap[slave_id], addr, val); diff --git a/include/linux/mfd/pm8xxx/core.h b/include/linux/mfd/pm8xxx/core.h deleted file mode 100644 index bd2f4f64e931..000000000000 --- a/include/linux/mfd/pm8xxx/core.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -/* - * Qualcomm PMIC 8xxx driver header file - * - */ - -#ifndef __MFD_PM8XXX_CORE_H -#define __MFD_PM8XXX_CORE_H - -#include <linux/mfd/core.h> - -struct pm8xxx_drvdata { - int (*pmic_readb) (const struct device *dev, u16 addr, u8 *val); - int (*pmic_writeb) (const struct device *dev, u16 addr, u8 val); - int (*pmic_read_buf) (const struct device *dev, u16 addr, u8 *buf, - int n); - int (*pmic_write_buf) (const struct device *dev, u16 addr, u8 *buf, - int n); - int (*pmic_read_irq_stat) (const struct device *dev, int irq); - void *pm_chip_data; -}; - -static inline int pm8xxx_readb(const struct device *dev, u16 addr, u8 *val) -{ - struct pm8xxx_drvdata *dd = dev_get_drvdata(dev); - - if (!dd) - return -EINVAL; - return dd->pmic_readb(dev, addr, val); -} - -static inline int pm8xxx_writeb(const struct device *dev, u16 addr, u8 val) -{ - struct pm8xxx_drvdata *dd = dev_get_drvdata(dev); - - if (!dd) - return -EINVAL; - return dd->pmic_writeb(dev, addr, val); -} - -static inline int pm8xxx_read_buf(const struct device *dev, u16 addr, u8 *buf, - int n) -{ - struct pm8xxx_drvdata *dd = dev_get_drvdata(dev); - - if (!dd) - return -EINVAL; - return dd->pmic_read_buf(dev, addr, buf, n); -} - -static inline int pm8xxx_write_buf(const struct device *dev, u16 addr, u8 *buf, - int n) -{ - struct pm8xxx_drvdata *dd = dev_get_drvdata(dev); - - if (!dd) - return -EINVAL; - return dd->pmic_write_buf(dev, addr, buf, n); -} - -static inline int pm8xxx_read_irq_stat(const struct device *dev, int irq) -{ - struct pm8xxx_drvdata *dd = dev_get_drvdata(dev); - - if (!dd) - return -EINVAL; - return dd->pmic_read_irq_stat(dev, irq); -} - -#endif diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h index 4bdf19c8eedf..442743a8f915 100644 --- a/include/linux/mfd/rdc321x.h +++ b/include/linux/mfd/rdc321x.h @@ -12,7 +12,7 @@ #define RDC321X_GPIO_CTRL_REG2 0x84 #define RDC321X_GPIO_DATA_REG2 0x88 -#define RDC321X_MAX_GPIO 58 +#define RDC321X_NUM_GPIO 59 struct rdc321x_gpio_pdata { struct pci_dev *sb_pdev; diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 157e32b6ca28..47d84242940b 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -24,35 +24,36 @@ enum sec_device_type { }; /** - * struct sec_pmic_dev - s5m87xx master device for sub-drivers - * @dev: master device of the chip (can be used to access platform data) - * @pdata: pointer to private data used to pass platform data to child - * @i2c: i2c client private data for regulator - * @rtc: i2c client private data for rtc - * @iolock: mutex for serializing io access - * @irqlock: mutex for buslock - * @irq_base: base IRQ number for sec-pmic, required for IRQs - * @irq: generic IRQ number for s5m87xx - * @ono: power onoff IRQ number for s5m87xx - * @irq_masks_cur: currently active value - * @irq_masks_cache: cached hardware value - * @type: indicate which s5m87xx "variant" is used + * struct sec_pmic_dev - s2m/s5m master device for sub-drivers + * @dev: Master device of the chip + * @pdata: Platform data populated with data from DTS + * or board files + * @regmap_pmic: Regmap associated with PMIC's I2C address + * @i2c: I2C client of the main driver + * @device_type: Type of device, matches enum sec_device_type + * @irq_base: Base IRQ number for device, required for IRQs + * @irq: Generic IRQ number for device + * @irq_data: Runtime data structure for IRQ controller + * @ono: Power onoff IRQ number for s5m87xx + * @wakeup: Whether or not this is a wakeup device + * @wtsr_smpl: Whether or not to enable in RTC driver the Watchdog + * Timer Software Reset (registers set to default value + * after PWRHOLD falling) and Sudden Momentary Power Loss + * (PMIC will enter power on sequence after short drop in + * VBATT voltage). */ struct sec_pmic_dev { struct device *dev; struct sec_platform_data *pdata; struct regmap *regmap_pmic; - struct regmap *regmap_rtc; struct i2c_client *i2c; - struct i2c_client *rtc; - int device_type; + unsigned long device_type; int irq_base; int irq; struct regmap_irq_chip_data *irq_data; int ono; - unsigned long type; bool wakeup; bool wtsr_smpl; }; diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 48395a69a7e9..575a86c7fcbd 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -11,6 +11,7 @@ #include <linux/mutex.h> struct device; +struct regulator; enum stmpe_block { STMPE_BLOCK_GPIO = 1 << 0, @@ -62,6 +63,8 @@ struct stmpe_client_info; /** * struct stmpe - STMPE MFD structure + * @vcc: optional VCC regulator + * @vio: optional VIO regulator * @lock: lock protecting I/O operations * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() @@ -73,13 +76,14 @@ struct stmpe_client_info; * @regs: list of addresses of registers which are at different addresses on * different variants. Indexed by one of STMPE_IDX_*. * @irq: irq number for stmpe - * @irq_base: starting IRQ number for internal IRQs * @num_gpios: number of gpios, differs for variants * @ier: cache of IER registers for bus_lock * @oldier: cache of IER registers for bus_lock * @pdata: platform data */ struct stmpe { + struct regulator *vcc; + struct regulator *vio; struct mutex lock; struct mutex irq_lock; struct device *dev; @@ -91,7 +95,6 @@ struct stmpe { const u8 *regs; int irq; - int irq_base; int num_gpios; u8 ier[2]; u8 oldier[2]; @@ -132,8 +135,6 @@ struct stmpe_keypad_platform_data { /** * struct stmpe_gpio_platform_data - STMPE GPIO platform data - * @gpio_base: first gpio number assigned. A maximum of - * %STMPE_NR_GPIOS GPIOs will be allocated. * @norequest_mask: bitmask specifying which GPIOs should _not_ be * requestable due to different usage (e.g. touch, keypad) * STMPE_GPIO_NOREQ_* macros can be used here. @@ -141,7 +142,6 @@ struct stmpe_keypad_platform_data { * @remove: board specific remove callback */ struct stmpe_gpio_platform_data { - int gpio_base; unsigned norequest_mask; void (*setup)(struct stmpe *stmpe, unsigned gpio_base); void (*remove)(struct stmpe *stmpe, unsigned gpio_base); @@ -195,8 +195,6 @@ struct stmpe_ts_platform_data { * @irq_trigger: IRQ trigger to use for the interrupt to the host * @autosleep: bool to enable/disable stmpe autosleep * @autosleep_timeout: inactivity timeout in milliseconds for autosleep - * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or - * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used. * @irq_over_gpio: true if gpio is used to get irq * @irq_gpio: gpio number over which irq will be requested (significant only if * irq_over_gpio is true) @@ -207,7 +205,6 @@ struct stmpe_ts_platform_data { struct stmpe_platform_data { int id; unsigned int blocks; - int irq_base; unsigned int irq_trigger; bool autosleep; bool irq_over_gpio; @@ -219,10 +216,4 @@ struct stmpe_platform_data { struct stmpe_ts_platform_data *ts; }; -#define STMPE_NR_INTERNAL_IRQS 9 -#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) - -#define STMPE_NR_GPIOS 24 -#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) - #endif diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h index 8789fa3c7fd9..75e543b78f53 100644 --- a/include/linux/mfd/syscon.h +++ b/include/linux/mfd/syscon.h @@ -15,6 +15,8 @@ #ifndef __LINUX_MFD_SYSCON_H__ #define __LINUX_MFD_SYSCON_H__ +#include <linux/err.h> + struct device_node; #ifdef CONFIG_MFD_SYSCON diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index d2e357df5a0e..2f9b593246ee 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -267,7 +267,6 @@ struct tps65218 { u32 irq_mask; struct regmap_irq_chip_data *irq_data; struct regulator_desc desc[TPS65218_NUM_REGULATOR]; - struct regulator_dev *rdev[TPS65218_NUM_REGULATOR]; struct tps_info *info[TPS65218_NUM_REGULATOR]; struct regmap *regmap; }; diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 81f639bc1ae6..8f9fc3d26e6d 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -28,6 +28,7 @@ #include <linux/interrupt.h> #include <linux/mfd/core.h> #include <linux/regulator/consumer.h> +#include <linux/clk.h> #define TWL6040_REG_ASICID 0x01 #define TWL6040_REG_ASICREV 0x02 @@ -157,6 +158,7 @@ #define TWL6040_I2CSEL 0x01 #define TWL6040_RESETSPLIT 0x04 #define TWL6040_INTCLRMODE 0x08 +#define TWL6040_I2CMODE(x) ((x & 0x3) << 4) /* STATUS (0x2E) fields */ @@ -222,6 +224,7 @@ struct twl6040 { struct regmap *regmap; struct regmap_irq_chip_data *irq_data; struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */ + struct clk *clk32k; struct mutex mutex; struct mutex irq_mutex; struct mfd_cell cells[TWL6040_CELLS]; |