diff options
| -rw-r--r-- | arch/powerpc/include/asm/fsl_guts.h (renamed from arch/powerpc/include/asm/immap_86xx.h) | 111 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_ssi.c | 2 | ||||
| -rw-r--r-- | sound/soc/fsl/mpc8610_hpcd.c | 10 |
3 files changed, 81 insertions, 42 deletions
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/fsl_guts.h index 0f165e59c326..bebd12463ec9 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -1,5 +1,5 @@ /** - * MPC86xx Internal Memory Map + * Freecale 85xx and 86xx Global Utilties register set * * Authors: Jeff Brown * Timur Tabi <timur@freescale.com> @@ -10,73 +10,112 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * This header file defines structures for various 86xx SOC devices that are - * used by multiple source files. */ -#ifndef __ASM_POWERPC_IMMAP_86XX_H__ -#define __ASM_POWERPC_IMMAP_86XX_H__ +#ifndef __ASM_POWERPC_FSL_GUTS_H__ +#define __ASM_POWERPC_FSL_GUTS_H__ #ifdef __KERNEL__ -/* Global Utility Registers */ -struct ccsr_guts { +/* + * These #ifdefs are safe because it's not possible to build a kernel that + * runs on e500 and e600 cores. + */ + +#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx) +#error Only 85xx and 86xx SOCs are supported +#endif + +/** + * Global Utility Registers. + * + * Not all registers defined in this structure are available on all chips, so + * you are expected to know whether a given register actually exists on your + * chip before you access it. + * + * Also, some registers are similar on different chips but have slightly + * different names. In these cases, one name is chosen to avoid extraneous + * #ifdefs. + */ +#ifdef CONFIG_PPC_85xx +struct ccsr_guts_85xx { +#else +struct ccsr_guts_86xx { +#endif __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ - u8 res1[0x20 - 0x14]; + __be32 pordevsr2; /* 0x.0014 - POR device status register 2 */ + u8 res018[0x20 - 0x18]; __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ - u8 res2[0x30 - 0x24]; + u8 res024[0x30 - 0x24]; __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ - u8 res3[0x40 - 0x34]; + u8 res034[0x40 - 0x34]; __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ - u8 res4[0x50 - 0x44]; + u8 res044[0x50 - 0x44]; __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ - u8 res5[0x60 - 0x54]; + u8 res054[0x60 - 0x54]; __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ - u8 res6[0x70 - 0x64]; + __be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */ + __be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */ + u8 res06c[0x70 - 0x6c]; __be32 devdisr; /* 0x.0070 - Device Disable Control */ __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ - u8 res7[0x80 - 0x78]; + u8 res078[0x7c - 0x78]; + __be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */ __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ - u8 res8[0x90 - 0x84]; + __be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */ + __be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */ + __be32 pmcdr; /* 0x.008c - 4Power management clock disable register */ __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ - u8 res9[0xA0 - 0x98]; + __be32 ectrstcr; /* 0x.0098 - Exception reset control register */ + __be32 autorstsr; /* 0x.009c - Automatic reset status register */ __be32 pvr; /* 0x.00a0 - Processor Version Register */ __be32 svr; /* 0x.00a4 - System Version Register */ - u8 res10[0xB0 - 0xA8]; + u8 res0a8[0xb0 - 0xa8]; __be32 rstcr; /* 0x.00b0 - Reset Control Register */ - u8 res11[0xC0 - 0xB4]; + u8 res0b4[0xc0 - 0xb4]; +#ifdef CONFIG_PPC_85xx + __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */ +#else __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ - u8 res12[0x800 - 0xC4]; +#endif + u8 res0c4[0x224 - 0xc4]; + __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ + __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ + u8 res22c[0x800 - 0x22c]; __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ - u8 res13[0x900 - 0x804]; + u8 res804[0x900 - 0x804]; __be32 ircr; /* 0x.0900 - Infrared Control Register */ - u8 res14[0x908 - 0x904]; + u8 res904[0x908 - 0x904]; __be32 dmacr; /* 0x.0908 - DMA Control Register */ - u8 res15[0x914 - 0x90C]; + u8 res90c[0x914 - 0x90c]; __be32 elbccr; /* 0x.0914 - eLBC Control Register */ - u8 res16[0xB20 - 0x918]; + u8 res918[0xb20 - 0x918]; __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ - u8 res17[0xE00 - 0xB2C]; + u8 resb2c[0xe00 - 0xb2c]; __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ - u8 res18[0xE10 - 0xE04]; + u8 rese04[0xe10 - 0xe04]; __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ - u8 res19[0xE20 - 0xE14]; + u8 rese14[0xe20 - 0xe14]; __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ - u8 res20[0xF04 - 0xE24]; + __be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */ + u8 rese28[0xf04 - 0xe28]; __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ - u8 res21[0xF40 - 0xF0C]; - __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ - __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ + u8 resf0c[0xf2c - 0xf0c]; + __be32 itcr; /* 0x.0f2c - Internal transaction control register */ + u8 resf30[0xf40 - 0xf30]; + __be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */ + __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ } __attribute__ ((packed)); +#ifdef CONFIG_PPC_86xx + #define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ #define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ @@ -93,7 +132,7 @@ struct ccsr_guts { * ch: The channel on the DMA controller (0, 1, 2, or 3) * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) */ -static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, +static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, unsigned int co, unsigned int ch, unsigned int device) { unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); @@ -129,7 +168,7 @@ static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, * ch: The channel on the DMA controller (0, 1, 2, or 3) * value: the new value for the bit (0 or 1) */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, +static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts, unsigned int co, unsigned int ch, unsigned int value) { if ((ch == 0) || (ch == 3)) { @@ -152,5 +191,7 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, #define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF #define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) -#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ -#endif /* __KERNEL__ */ +#endif + +#endif +#endif diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 64f65910a7d7..51b089f9751c 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -24,8 +24,6 @@ #include <sound/initval.h> #include <sound/soc.h> -#include <asm/immap_86xx.h> - #include "fsl_ssi.h" /** diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 5ba823213abe..38339c158ed9 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/of_device.h> #include <sound/soc.h> -#include <asm/immap_86xx.h> +#include <asm/fsl_guts.h> #include "fsl_dma.h" #include "fsl_ssi.h" @@ -57,9 +57,9 @@ static int mpc8610_hpcd_machine_probe(struct platform_device *sound_device) struct snd_soc_card *card = platform_get_drvdata(sound_device); struct mpc8610_hpcd_data *machine_data = container_of(card, struct mpc8610_hpcd_data, card); - struct ccsr_guts __iomem *guts; + struct ccsr_guts_86xx __iomem *guts; - guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); + guts = ioremap(guts_phys, sizeof(struct ccsr_guts_86xx)); if (!guts) { dev_err(card->dev, "could not map global utilities\n"); return -ENOMEM; @@ -142,9 +142,9 @@ static int mpc8610_hpcd_machine_remove(struct platform_device *sound_device) struct snd_soc_card *card = platform_get_drvdata(sound_device); struct mpc8610_hpcd_data *machine_data = container_of(card, struct mpc8610_hpcd_data, card); - struct ccsr_guts __iomem *guts; + struct ccsr_guts_86xx __iomem *guts; - guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); + guts = ioremap(guts_phys, sizeof(struct ccsr_guts_86xx)); if (!guts) { dev_err(card->dev, "could not map global utilities\n"); return -ENOMEM; |