diff options
| -rw-r--r-- | drivers/bus/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/bus/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bus/mvebu-mbus.c | 867 | ||||
| -rw-r--r-- | include/linux/mbus.h | 24 |
4 files changed, 898 insertions, 1 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 0f51ed687dc8..b05ecab915c4 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -4,6 +4,13 @@ menu "Bus devices" +config MVEBU_MBUS + bool + depends on PLAT_ORION + help + Driver needed for the MBus configuration on Marvell EBU SoCs + (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). + config OMAP_OCP2SCP tristate "OMAP OCP2SCP DRIVER" depends on ARCH_OMAP2PLUS diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 45d997c85453..3c7b53c12091 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -2,6 +2,7 @@ # Makefile for the bus drivers. # +obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o # Interconnect bus driver for OMAP SoCs. diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c new file mode 100644 index 000000000000..586d03e29e9e --- /dev/null +++ b/drivers/bus/mvebu-mbus.c @@ -0,0 +1,867 @@ +/* + * Address map functions for Marvell EBU SoCs (Kirkwood, Armada + * 370/XP, Dove, Orion5x and MV78xx0) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Marvell EBU SoCs have a configurable physical address space: + * the physical address at which certain devices (PCIe, NOR, NAND, + * etc.) sit can be configured. The configuration takes place through + * two sets of registers: + * + * - One to configure the access of the CPU to the devices. Depending + * on the families, there are between 8 and 20 configurable windows, + * each can be use to create a physical memory window that maps to a + * specific device. Devices are identified by a tuple (target, + * attribute). + * + * - One to configure the access to the CPU to the SDRAM. There are + * either 2 (for Dove) or 4 (for other families) windows to map the + * SDRAM into the physical address space. + * + * This driver: + * + * - Reads out the SDRAM address decoding windows at initialization + * time, and fills the mvebu_mbus_dram_info structure with these + * informations. The exported function mv_mbus_dram_info() allow + * device drivers to get those informations related to the SDRAM + * address decoding windows. This is because devices also have their + * own windows (configured through registers that are part of each + * device register space), and therefore the drivers for Marvell + * devices have to configure those device -> SDRAM windows to ensure + * that DMA works properly. + * + * - Provides an API for platform code or device drivers to + * dynamically add or remove address decoding windows for the CPU -> + * device accesses. This API is mvebu_mbus_add_window(), + * mvebu_mbus_add_window_remap_flags() and + * mvebu_mbus_del_window(). Since the (target, attribute) values + * differ from one SoC family to another, the API uses a 'const char + * *' string to identify devices, and this driver is responsible for + * knowing the mapping between the name of a device and its + * corresponding (target, attribute) in the current SoC family. + * + * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to + * see the list of CPU -> SDRAM windows and their configuration + * (file 'sdram') and the list of CPU -> devices windows and their + * configuration (file 'devices'). + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/debugfs.h> + +/* + * DDR target is the same on all platforms. + */ +#define TARGET_DDR 0 + +/* + * CPU Address Decode Windows registers + */ +#define WIN_CTRL_OFF 0x0000 +#define WIN_CTRL_ENABLE BIT(0) +#define WIN_CTRL_TGT_MASK 0xf0 +#define WIN_CTRL_TGT_SHIFT 4 +#define WIN_CTRL_ATTR_MASK 0xff00 +#define WIN_CTRL_ATTR_SHIFT 8 +#define WIN_CTRL_SIZE_MASK 0xffff0000 +#define WIN_CTRL_SIZE_SHIFT 16 +#define WIN_BASE_OFF 0x0004 +#define WIN_BASE_LOW 0xffff0000 +#define WIN_BASE_HIGH 0xf +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_LOW 0xffff0000 +#define WIN_REMAP_HI_OFF 0x000c + +#define ATTR_HW_COHERENCY (0x1 << 4) + +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_BASE_CS_HIGH_MASK 0xf +#define DDR_BASE_CS_LOW_MASK 0xff000000 +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) +#define DDR_SIZE_ENABLED BIT(0) +#define DDR_SIZE_CS_MASK 0x1c +#define DDR_SIZE_CS_SHIFT 2 +#define DDR_SIZE_MASK 0xff000000 + +#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) + +struct mvebu_mbus_mapping { + const char *name; + u8 target; + u8 attr; + u8 attrmask; +}; + +/* + * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They + * allow to get the real attribute value, discarding the special bits + * used to select a PCI MEM region or a PCI WA region. This allows the + * debugfs code to reverse-match the name of a device from its + * target/attr values. + * + * For all devices except PCI, all bits of 'attr' must be + * considered. For most SoCs, only bit 3 should be ignored (it allows + * to select between PCI MEM and PCI I/O). On Orion5x however, there + * is the special bit 5 to select a PCI WA region. + */ +#define MAPDEF_NOMASK 0xff +#define MAPDEF_PCIMASK 0xf7 +#define MAPDEF_ORIONPCIMASK 0xd7 + +/* Macro used to define one mvebu_mbus_mapping entry */ +#define MAPDEF(__n, __t, __a, __m) \ + { .name = __n, .target = __t, .attr = __a, .attrmask = __m } + +struct mvebu_mbus_state; + +struct mvebu_mbus_soc_data { + unsigned int num_wins; + unsigned int num_remappable_wins; + unsigned int (*win_cfg_offset)(const int win); + void (*setup_cpu_target)(struct mvebu_mbus_state *s); + int (*show_cpu_target)(struct mvebu_mbus_state *s, + struct seq_file *seq, void *v); + const struct mvebu_mbus_mapping *map; +}; + +struct mvebu_mbus_state { + void __iomem *mbuswins_base; + void __iomem *sdramwins_base; + struct dentry *debugfs_root; + struct dentry *debugfs_sdram; + struct dentry *debugfs_devs; + const struct mvebu_mbus_soc_data *soc; + int hw_io_coherency; +}; + +static struct mvebu_mbus_state mbus_state; + +static struct mbus_dram_target_info mvebu_mbus_dram_info; +const struct mbus_dram_target_info *mv_mbus_dram_info(void) +{ + return &mvebu_mbus_dram_info; +} +EXPORT_SYMBOL_GPL(mv_mbus_dram_info); + +/* + * Functions to manipulate the address decoding windows + */ + +static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, + int win, int *enabled, u64 *base, + u32 *size, u8 *target, u8 *attr, + u64 *remap) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 basereg = readl(addr + WIN_BASE_OFF); + u32 ctrlreg = readl(addr + WIN_CTRL_OFF); + + if (!(ctrlreg & WIN_CTRL_ENABLE)) { + *enabled = 0; + return; + } + + *enabled = 1; + *base = ((u64)basereg & WIN_BASE_HIGH) << 32; + *base |= (basereg & WIN_BASE_LOW); + *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; + + if (target) + *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; + + if (attr) + *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; + + if (remap) { + if (win < mbus->soc->num_remappable_wins) { + u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); + u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); + *remap = ((u64)remap_hi << 32) | remap_low; + } else + *remap = 0; + } +} + +static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, + int win) +{ + void __iomem *addr; + + addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); + + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + if (win < mbus->soc->num_remappable_wins) { + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +/* Checks whether the given window number is available */ +static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, + const int win) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl = readl(addr + WIN_CTRL_OFF); + return !(ctrl & WIN_CTRL_ENABLE); +} + +/* + * Checks whether the given (base, base+size) area doesn't overlap an + * existing region + */ +static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + u8 target, u8 attr) +{ + u64 end = (u64)base + size; + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase, wend; + u32 wsize; + u8 wtarget, wattr; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + &wtarget, &wattr, NULL); + + if (!enabled) + continue; + + wend = wbase + wsize; + + /* + * Check if the current window overlaps with the + * proposed physical range + */ + if ((u64)base < wend && end > wbase) + return 0; + + /* + * Check if target/attribute conflicts + */ + if (target == wtarget && attr == wattr) + return 0; + } + + return 1; +} + +static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size) +{ + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase; + u32 wsize; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + NULL, NULL, NULL); + + if (!enabled) + continue; + + if (base == wbase && size == wsize) + return win; + } + + return -ENODEV; +} + +static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, + int win, phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl, remap_addr; + + ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | + (attr << WIN_CTRL_ATTR_SHIFT) | + (target << WIN_CTRL_TGT_SHIFT) | + WIN_CTRL_ENABLE; + + writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + if (win < mbus->soc->num_remappable_wins) { + if (remap == MVEBU_MBUS_NO_REMAP) + remap_addr = base; + else + remap_addr = remap; + writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } + + return 0; +} + +static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + int win; + + if (remap == MVEBU_MBUS_NO_REMAP) { + for (win = mbus->soc->num_remappable_wins; + win < mbus->soc->num_wins; win++) + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, + size, remap, + target, attr); + } + + + for (win = 0; win < mbus->soc->num_wins; win++) + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, size, + remap, target, attr); + + return -ENOMEM; +} + +/* + * Debugfs debugging + */ + +/* Common function used for Dove, Kirkwood, Armada 370/XP and Orion 5x */ +static int mvebu_sdram_debug_show_orion(struct mvebu_mbus_state *mbus, + struct seq_file *seq, void *v) +{ + int i; + + for (i = 0; i < 4; i++) { + u32 basereg = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 sizereg = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + u64 base; + u32 size; + + if (!(sizereg & DDR_SIZE_ENABLED)) { + seq_printf(seq, "[%d] disabled\n", i); + continue; + } + + base = ((u64)basereg & DDR_BASE_CS_HIGH_MASK) << 32; + base |= basereg & DDR_BASE_CS_LOW_MASK; + size = (sizereg | ~DDR_SIZE_MASK); + + seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n", + i, (unsigned long long)base, + (unsigned long long)base + size + 1, + (sizereg & DDR_SIZE_CS_MASK) >> DDR_SIZE_CS_SHIFT); + } + + return 0; +} + +/* Special function for Dove */ +static int mvebu_sdram_debug_show_dove(struct mvebu_mbus_state *mbus, + struct seq_file *seq, void *v) +{ + int i; + + for (i = 0; i < 2; i++) { + u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i)); + u64 base; + u32 size; + + if (!(map & 1)) { + seq_printf(seq, "[%d] disabled\n", i); + continue; + } + + base = map & 0xff800000; + size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); + + seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n", + i, (unsigned long long)base, + (unsigned long long)base + size, i); + } + + return 0; +} + +static int mvebu_sdram_debug_show(struct seq_file *seq, void *v) +{ + struct mvebu_mbus_state *mbus = &mbus_state; + return mbus->soc->show_cpu_target(mbus, seq, v); +} + +static int mvebu_sdram_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, mvebu_sdram_debug_show, inode->i_private); +} + +static const struct file_operations mvebu_sdram_debug_fops = { + .open = mvebu_sdram_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int mvebu_devs_debug_show(struct seq_file *seq, void *v) +{ + struct mvebu_mbus_state *mbus = &mbus_state; + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase, wremap; + u32 wsize; + u8 wtarget, wattr; + int enabled, i; + const char *name; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + &wtarget, &wattr, &wremap); + + if (!enabled) { + seq_printf(seq, "[%02d] disabled\n", win); + continue; + } + + + for (i = 0; mbus->soc->map[i].name; i++) + if (mbus->soc->map[i].target == wtarget && + mbus->soc->map[i].attr == + (wattr & mbus->soc->map[i].attrmask)) + break; + + name = mbus->soc->map[i].name ?: "unknown"; + + seq_printf(seq, "[%02d] %016llx - %016llx : %s", + win, (unsigned long long)wbase, + (unsigned long long)(wbase + wsize), name); + + if (win < mbus->soc->num_remappable_wins) { + seq_printf(seq, " (remap %016llx)\n", + (unsigned long long)wremap); + } else + seq_printf(seq, "\n"); + } + + return 0; +} + +static int mvebu_devs_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, mvebu_devs_debug_show, inode->i_private); +} + +static const struct file_operations mvebu_devs_debug_fops = { + .open = mvebu_devs_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * SoC-specific functions and definitions + */ + +static unsigned int orion_mbus_win_offset(int win) +{ + return win << 4; +} + +static unsigned int armada_370_xp_mbus_win_offset(int win) +{ + /* The register layout is a bit annoying and the below code + * tries to cope with it. + * - At offset 0x0, there are the registers for the first 8 + * windows, with 4 registers of 32 bits per window (ctrl, + * base, remap low, remap high) + * - Then at offset 0x80, there is a hole of 0x10 bytes for + * the internal registers base address and internal units + * sync barrier register. + * - Then at offset 0x90, there the registers for 12 + * windows, with only 2 registers of 32 bits per window + * (ctrl, base). + */ + if (win < 8) + return win << 4; + else + return 0x90 + ((win - 8) << 3); +} + +static unsigned int mv78xx0_mbus_win_offset(int win) +{ + if (win < 8) + return win << 4; + else + return 0x900 + ((win - 8) << 4); +} + +static void __init +mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + + /* + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). + */ + if ((size & DDR_SIZE_ENABLED) && + !(base & DDR_BASE_CS_HIGH_MASK)) { + struct mbus_dram_window *w; + + w = &mvebu_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + if (mbus->hw_io_coherency) + w->mbus_attr |= ATTR_HW_COHERENCY; + w->base = base & DDR_BASE_CS_LOW_MASK; + w->size = (size | ~DDR_SIZE_MASK) + 1; + } + } + mvebu_mbus_dram_info.num_cs = cs; +} + +static void __init +mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 2; i++) { + u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i)); + + /* + * Chip select enabled? + */ + if (map & 1) { + struct mbus_dram_window *w; + + w = &mvebu_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0; /* CS address decoding done inside */ + /* the DDR controller, no need to */ + /* provide attributes */ + w->base = map & 0xff800000; + w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); + } + } + + mvebu_mbus_dram_info.num_cs = cs; +} + +static const struct mvebu_mbus_mapping armada_370_map[] = { + MAPDEF("bootrom", 1, 0xe0, MAPDEF_NOMASK), + MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK), + MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK), + MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK), + MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK), + MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK), + MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), + {}, +}; + +static const struct mvebu_mbus_soc_data armada_370_mbus_data = { + .num_wins = 20, + .num_remappable_wins = 8, + .win_cfg_offset = armada_370_xp_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .map = armada_370_map, +}; + +static const struct mvebu_mbus_mapping armada_xp_map[] = { + MAPDEF("bootrom", 1, 0x1d, MAPDEF_NOMASK), + MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK), + MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK), + MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK), + MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK), + MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK), + MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK), + MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK), + MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK), + MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK), + MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK), + MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK), + MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK), + MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK), + {}, +}; + +static const struct mvebu_mbus_soc_data armada_xp_mbus_data = { + .num_wins = 20, + .num_remappable_wins = 8, + .win_cfg_offset = armada_370_xp_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .map = armada_xp_map, +}; + +static const struct mvebu_mbus_mapping kirkwood_map[] = { + MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), + MAPDEF("sram", 3, 0x01, MAPDEF_NOMASK), + MAPDEF("nand", 1, 0x2f, MAPDEF_NOMASK), + {}, +}; + +static const struct mvebu_mbus_soc_data kirkwood_mbus_data = { + .num_wins = 8, + .num_remappable_wins = 4, + .win_cfg_offset = orion_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .map = kirkwood_map, +}; + +static const struct mvebu_mbus_mapping dove_map[] = { + MAPDEF("pcie0.0", 0x4, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie1.0", 0x8, 0xe0, MAPDEF_PCIMASK), + MAPDEF("cesa", 0x3, 0x01, MAPDEF_NOMASK), + MAPDEF("bootrom", 0x1, 0xfd, MAPDEF_NOMASK), + MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK), + {}, +}; + +static const struct mvebu_mbus_soc_data dove_mbus_data = { + .num_wins = 8, + .num_remappable_wins = 4, + .win_cfg_offset = orion_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_dove_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_dove, + .map = dove_map, +}; + +static const struct mvebu_mbus_mapping orion5x_map[] = { + MAPDEF("pcie0.0", 4, 0x51, MAPDEF_ORIONPCIMASK), + MAPDEF("pci0.0", 3, 0x51, MAPDEF_ORIONPCIMASK), + MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK), + MAPDEF("devbus-cs0", 1, 0x1e, MAPDEF_NOMASK), + MAPDEF("devbus-cs1", 1, 0x1d, MAPDEF_NOMASK), + MAPDEF("devbus-cs2", 1, 0x1b, MAPDEF_NOMASK), + MAPDEF("sram", 0, 0x00, MAPDEF_NOMASK), + {}, +}; + +/* + * Some variants of Orion5x have 4 remappable windows, some other have + * only two of them. + */ +static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = { + .num_wins = 8, + .num_remappable_wins = 4, + .win_cfg_offset = orion_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .map = orion5x_map, +}; + +static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = { + .num_wins = 8, + .num_remappable_wins = 2, + .win_cfg_offset = orion_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .map = orion5x_map, +}; + +static const struct mvebu_mbus_mapping mv78xx0_map[] = { + MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK), + MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK), + MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK), + MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), + MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK), + MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK), + MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK), + MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK), + MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK), + {}, +}; + +static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = { + .num_wins = 14, + .num_remappable_wins = 8, + .win_cfg_offset = mv78xx0_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .map = mv78xx0_map, +}; + +/* + * The driver doesn't yet have a DT binding because the details of + * this DT binding still need to be sorted out. However, as a + * preparation, we already use of_device_id to match a SoC description + * string against the SoC specific details of this driver. + */ +static const struct of_device_id of_mvebu_mbus_ids[] = { + { .compatible = "marvell,armada370-mbus", + .data = &armada_370_mbus_data, }, + { .compatible = "marvell,armadaxp-mbus", + .data = &armada_xp_mbus_data, }, + { .compatible = "marvell,kirkwood-mbus", + .data = &kirkwood_mbus_data, }, + { .compatible = "marvell,dove-mbus", + .data = &dove_mbus_data, }, + { .compatible = "marvell,orion5x-88f5281-mbus", + .data = &orion5x_4win_mbus_data, }, + { .compatible = "marvell,orion5x-88f5182-mbus", + .data = &orion5x_2win_mbus_data, }, + { .compatible = "marvell,orion5x-88f5181-mbus", + .data = &orion5x_2win_mbus_data, }, + { .compatible = "marvell,orion5x-88f6183-mbus", + .data = &orion5x_4win_mbus_data, }, + { .compatible = "marvell,mv78xx0-mbus", + .data = &mv78xx0_mbus_data, }, + { }, +}; + +/* + * Public API of the driver + */ +int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, + size_t size, phys_addr_t remap, + unsigned int flags) +{ + struct mvebu_mbus_state *s = &mbus_state; + u8 target, attr; + int i; + + if (!s->soc->map) + return -ENODEV; + + for (i = 0; s->soc->map[i].name; i++) + if (!strcmp(s->soc->map[i].name, devname)) + break; + + if (!s->soc->map[i].name) { + pr_err("mvebu-mbus: unknown device '%s'\n", devname); + return -ENODEV; + } + + target = s->soc->map[i].target; + attr = s->soc->map[i].attr; + + if (flags == MVEBU_MBUS_PCI_MEM) + attr |= 0x8; + else if (flags == MVEBU_MBUS_PCI_WA) + attr |= 0x28; + + if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) { + pr_err("mvebu-mbus: cannot add window '%s', conflicts with another window\n", + devname); + return -EINVAL; + } + + return mvebu_mbus_alloc_window(s, base, size, remap, target, attr); + +} + +int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size) +{ + return mvebu_mbus_add_window_remap_flags(devname, base, size, + MVEBU_MBUS_NO_REMAP, 0); +} + +int mvebu_mbus_del_window(phys_addr_t base, size_t size) +{ + int win; + + win = mvebu_mbus_find_window(&mbus_state, base, size); + if (win < 0) + return win; + + mvebu_mbus_disable_window(&mbus_state, win); + return 0; +} + +static __init int mvebu_mbus_debugfs_init(void) +{ + struct mvebu_mbus_state *s = &mbus_state; + + /* + * If no base has been initialized, doesn't make sense to + * register the debugfs entries. We may be on a multiplatform + * kernel that isn't running a Marvell EBU SoC. + */ + if (!s->mbuswins_base) + return 0; + + s->debugfs_root = debugfs_create_dir("mvebu-mbus", NULL); + if (s->debugfs_root) { + s->debugfs_sdram = debugfs_create_file("sdram", S_IRUGO, + s->debugfs_root, NULL, + &mvebu_sdram_debug_fops); + s->debugfs_devs = debugfs_create_file("devices", S_IRUGO, + s->debugfs_root, NULL, + &mvebu_devs_debug_fops); + } + + return 0; +} +fs_initcall(mvebu_mbus_debugfs_init); + +int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base, + size_t mbuswins_size, + phys_addr_t sdramwins_phys_base, + size_t sdramwins_size) +{ + struct mvebu_mbus_state *mbus = &mbus_state; + const struct of_device_id *of_id; + int win; + + for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++) + if (!strcmp(of_id->compatible, soc)) + break; + + if (!of_id->compatible) { + pr_err("mvebu-mbus: could not find a matching SoC family\n"); + return -ENODEV; + } + + mbus->soc = of_id->data; + + mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); + if (!mbus->mbuswins_base) + return -ENOMEM; + + mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size); + if (!mbus->sdramwins_base) { + iounmap(mbus_state.mbuswins_base); + return -ENOMEM; + } + + for (win = 0; win < mbus->soc->num_wins; win++) + mvebu_mbus_disable_window(mbus, win); + + mbus->soc->setup_cpu_target(mbus); + + return 0; +} diff --git a/include/linux/mbus.h b/include/linux/mbus.h index efa1a6d7aca8..462eb9791012 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -32,6 +32,17 @@ struct mbus_dram_target_info } cs[4]; }; +/* Flags for PCI/PCIe address decoding regions */ +#define MVEBU_MBUS_PCI_IO 0x1 +#define MVEBU_MBUS_PCI_MEM 0x2 +#define MVEBU_MBUS_PCI_WA 0x3 + +/* + * Magic value that explicits that we don't need a remapping-capable + * address decoding window. + */ +#define MVEBU_MBUS_NO_REMAP (0xffffffff) + /* * The Marvell mbus is to be found only on SOCs from the Orion family * at the moment. Provide a dummy stub for other architectures. @@ -44,4 +55,15 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void) return NULL; } #endif -#endif + +int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, + size_t size, phys_addr_t remap, + unsigned int flags); +int mvebu_mbus_add_window(const char *devname, phys_addr_t base, + size_t size); +int mvebu_mbus_del_window(phys_addr_t base, size_t size); +int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base, + size_t mbus_size, phys_addr_t sdram_phys_base, + size_t sdram_size); + +#endif /* __LINUX_MBUS_H */ |