diff options
| -rw-r--r-- | arch/avr32/boards/atngw100/evklcd10x.c | 9 | ||||
| -rw-r--r-- | arch/avr32/boards/hammerhead/setup.c | 4 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/at32ap700x.c | 51 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/board.h | 10 |
4 files changed, 45 insertions, 29 deletions
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c index ae6991205409..00337112c5ac 100644 --- a/arch/avr32/boards/atngw100/evklcd10x.c +++ b/arch/avr32/boards/atngw100/evklcd10x.c @@ -23,11 +23,10 @@ #include <mach/portmux.h> #include <mach/board.h> +#include <sound/atmel-ac97c.h> + static struct ac97c_platform_data __initdata ac97c0_data = { - .dma_rx_periph_id = 3, - .dma_tx_periph_id = 4, - .dma_controller_id = 0, - .reset_pin = GPIO_PIN_PB(19), + .reset_pin = GPIO_PIN_PB(19), }; #ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA @@ -167,7 +166,7 @@ static int __init atevklcd10x_init(void) fbmem_start, fbmem_size, ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL); - at32_add_device_ac97c(0, &ac97c0_data); + at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH); return 0; } diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c index 4d2fe82b2029..a5c2da25c4fe 100644 --- a/arch/avr32/boards/hammerhead/setup.c +++ b/arch/avr32/boards/hammerhead/setup.c @@ -29,6 +29,8 @@ #include <mach/init.h> #include <mach/portmux.h> +#include <sound/atmel-ac97c.h> + #include "../../mach-at32ap/clock.h" #include "flash.h" @@ -233,7 +235,7 @@ static int __init hammerhead_init(void) i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); #ifdef CONFIG_BOARD_HAMMERHEAD_SND - at32_add_device_ac97c(0, &ac97c_data); + at32_add_device_ac97c(0, &ac97c_data, AC97C_BOTH); #endif /* Select the Touchscreen interrupt pin mode */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 1bc6389b20b0..62501d64322c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -27,6 +27,7 @@ #include <mach/sram.h> #include <sound/atmel-abdac.h> +#include <sound/atmel-ac97c.h> #include <video/atmel_lcdc.h> @@ -1982,11 +1983,14 @@ static struct clk atmel_ac97c0_pclk = { }; struct platform_device *__init -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags) { - struct platform_device *pdev; - struct ac97c_platform_data _data; - u32 pin_mask; + struct platform_device *pdev; + struct dw_dma_slave *rx_dws; + struct dw_dma_slave *tx_dws; + struct ac97c_platform_data _data; + u32 pin_mask; if (id != 0) return NULL; @@ -1997,37 +2001,52 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) if (platform_device_add_resources(pdev, atmel_ac97c0_resource, ARRAY_SIZE(atmel_ac97c0_resource))) - goto fail; + goto out_free_resources; if (!data) { data = &_data; memset(data, 0, sizeof(struct ac97c_platform_data)); - data->reset_pin = GPIO_PIN_NONE; + data->reset_pin = -ENODEV; } - data->dma_rx_periph_id = 3; - data->dma_tx_periph_id = 4; - data->dma_controller_id = 0; + rx_dws = &data->rx_dws; + tx_dws = &data->tx_dws; + + /* Check if DMA slave interface for capture should be configured. */ + if (flags & AC97C_CAPTURE) { + rx_dws->dma_dev = &dw_dmac0_device.dev; + rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; + rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); + rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + } + + /* Check if DMA slave interface for playback should be configured. */ + if (flags & AC97C_PLAYBACK) { + tx_dws->dma_dev = &dw_dmac0_device.dev; + tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; + tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); + tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + } if (platform_device_add_data(pdev, data, sizeof(struct ac97c_platform_data))) - goto fail; + goto out_free_resources; - pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */ - pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */ + /* SDO | SYNC | SCLK | SDI */ + pin_mask = (1 << 20) | (1 << 21) | (1 << 22) | (1 << 23); select_peripheral(PIOB, pin_mask, PERIPH_B, 0); - /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ - if (data->reset_pin != GPIO_PIN_NONE) - at32_select_gpio(data->reset_pin, 0); + if (gpio_is_valid(data->reset_pin)) + at32_select_gpio(data->reset_pin, AT32_GPIOF_OUTPUT + | AT32_GPIOF_HIGH); atmel_ac97c0_pclk.dev = &pdev->dev; platform_device_add(pdev); return pdev; -fail: +out_free_resources: platform_device_put(pdev); return NULL; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 63ec4008b253..b363b067b0a4 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -88,14 +88,10 @@ struct mci_platform_data; struct platform_device * at32_add_device_mci(unsigned int id, struct mci_platform_data *data); -struct ac97c_platform_data { - unsigned short dma_rx_periph_id; - unsigned short dma_tx_periph_id; - unsigned short dma_controller_id; - int reset_pin; -}; +struct ac97c_platform_data; struct platform_device * -at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data); +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags); struct atmel_abdac_pdata; struct platform_device * |