summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/thermal/exynos-thermal.txt23
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal.txt16
-rw-r--r--drivers/md/md.c6
-rw-r--r--drivers/md/raid1.c25
-rw-r--r--drivers/mmc/host/renesas_sdhi_internal_dmac.c39
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c25
6 files changed, 86 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 1b596fd38dc4..b957acff57aa 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured):
- samsung,exynos5433-tmu: 8
- samsung,exynos7-tmu: 8
-Following properties are mandatory (depending on SoC):
-- samsung,tmu_gain: Gain value for internal TMU operation.
-- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
-- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
-- samsung,tmu_efuse_value: Default level of temperature - it is needed when
- in factory fusing produced wrong value
-- samsung,tmu_min_efuse_value: Minimum temperature fused value
-- samsung,tmu_max_efuse_value: Maximum temperature fused value
-- samsung,tmu_first_point_trim: First point trimming value
-- samsung,tmu_second_point_trim: Second point trimming value
-- samsung,tmu_default_temp_offset: Default temperature offset
-- samsung,tmu_cal_type: Callibration type
-
** Optional properties:
- vtmu-supply: This entry is optional and provides the regulator node supplying
@@ -78,7 +65,7 @@ Example 1):
clocks = <&clock 383>;
clock-names = "tmu_apbif";
vtmu-supply = <&tmu_regulator_node>;
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
Example 2):
@@ -89,7 +76,7 @@ Example 2):
interrupts = <0 58 0>;
clocks = <&clock 21>;
clock-names = "tmu_apbif";
- #include "exynos5440-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
@@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
interrupts = <0 184 0>;
clocks = <&clock 318>, <&clock 318>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_cpu3: tmu@1006c000 {
@@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
interrupts = <0 185 0>;
clocks = <&clock 318>, <&clock 319>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
tmu_gpu: tmu@100a0000 {
@@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
interrupts = <0 215 0>;
clocks = <&clock 319>, <&clock 318>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
Note: For multi-instance tmu each instance should have an alias correctly
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 1719d47a5e2f..cc553f0952c5 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -55,8 +55,7 @@ of heat dissipation). For example a fan's cooling states correspond to
the different fan speeds possible. Cooling states are referred to by
single unsigned integers, where larger numbers mean greater heat
dissipation. The precise set of cooling states associated with a device
-(as referred to by the cooling-min-level and cooling-max-level
-properties) should be defined in a particular device's binding.
+should be defined in a particular device's binding.
For more examples of cooling devices, refer to the example sections below.
Required properties:
@@ -69,15 +68,6 @@ Required properties:
See Cooling device maps section below for more details
on how consumers refer to cooling devices.
-Optional properties:
-- cooling-min-level: An integer indicating the smallest
- Type: unsigned cooling state accepted. Typically 0.
- Size: one cell
-
-- cooling-max-level: An integer indicating the largest
- Type: unsigned cooling state accepted.
- Size: one cell
-
* Trip points
The trip node is a node to describe a point in the temperature domain
@@ -226,8 +216,6 @@ cpus {
396000 950000
198000 850000
>;
- cooling-min-level = <0>;
- cooling-max-level = <3>;
#cooling-cells = <2>; /* min followed by max */
};
...
@@ -241,8 +229,6 @@ cpus {
*/
fan0: fan@48 {
...
- cooling-min-level = <0>;
- cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 3bea45e8ccff..c208c01f63a5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9256,8 +9256,10 @@ void md_reload_sb(struct mddev *mddev, int nr)
check_sb_changes(mddev, rdev);
/* Read all rdev's to update recovery_offset */
- rdev_for_each_rcu(rdev, mddev)
- read_rdev(mddev, rdev);
+ rdev_for_each_rcu(rdev, mddev) {
+ if (!test_bit(Faulty, &rdev->flags))
+ read_rdev(mddev, rdev);
+ }
}
EXPORT_SYMBOL(md_reload_sb);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index e2943fb74056..e9e3308cb0a7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -854,7 +854,7 @@ static void flush_pending_writes(struct r1conf *conf)
* there is no normal IO happeing. It must arrange to call
* lower_barrier when the particular background IO completes.
*/
-static void raise_barrier(struct r1conf *conf, sector_t sector_nr)
+static sector_t raise_barrier(struct r1conf *conf, sector_t sector_nr)
{
int idx = sector_to_idx(sector_nr);
@@ -885,13 +885,23 @@ static void raise_barrier(struct r1conf *conf, sector_t sector_nr)
* max resync count which allowed on current I/O barrier bucket.
*/
wait_event_lock_irq(conf->wait_barrier,
- !conf->array_frozen &&
+ (!conf->array_frozen &&
!atomic_read(&conf->nr_pending[idx]) &&
- atomic_read(&conf->barrier[idx]) < RESYNC_DEPTH,
+ atomic_read(&conf->barrier[idx]) < RESYNC_DEPTH) ||
+ test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery),
conf->resync_lock);
+ if (test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
+ atomic_dec(&conf->barrier[idx]);
+ spin_unlock_irq(&conf->resync_lock);
+ wake_up(&conf->wait_barrier);
+ return -EINTR;
+ }
+
atomic_inc(&conf->nr_sync_pending);
spin_unlock_irq(&conf->resync_lock);
+
+ return 0;
}
static void lower_barrier(struct r1conf *conf, sector_t sector_nr)
@@ -1092,6 +1102,8 @@ static void alloc_behind_master_bio(struct r1bio *r1_bio,
goto skip_copy;
}
+ behind_bio->bi_write_hint = bio->bi_write_hint;
+
while (i < vcnt && size) {
struct page *page;
int len = min_t(int, PAGE_SIZE, size);
@@ -2662,9 +2674,12 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
bitmap_cond_end_sync(mddev->bitmap, sector_nr,
mddev_is_clustered(mddev) && (sector_nr + 2 * RESYNC_SECTORS > conf->cluster_sync_high));
- r1_bio = raid1_alloc_init_r1buf(conf);
- raise_barrier(conf, sector_nr);
+
+ if (raise_barrier(conf, sector_nr))
+ return 0;
+
+ r1_bio = raid1_alloc_init_r1buf(conf);
rcu_read_lock();
/*
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 8e0acd197c43..6af946d16d24 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/io-64-nonatomic-hi-lo.h>
@@ -62,6 +63,17 @@
* need a custom accessor.
*/
+static unsigned long global_flags;
+/*
+ * Workaround for avoiding to use RX DMAC by multiple channels.
+ * On R-Car H3 ES1.* and M3-W ES1.0, when multiple SDHI channels use
+ * RX DMAC simultaneously, sometimes hundreds of bytes data are not
+ * stored into the system memory even if the DMAC interrupt happened.
+ * So, this driver then uses one RX DMAC channel only.
+ */
+#define SDHI_INTERNAL_DMAC_ONE_RX_ONLY 0
+#define SDHI_INTERNAL_DMAC_RX_IN_USE 1
+
/* Definitions for sampling clocks */
static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = {
{
@@ -126,6 +138,9 @@ renesas_sdhi_internal_dmac_abort_dma(struct tmio_mmc_host *host) {
renesas_sdhi_internal_dmac_dm_write(host, DM_CM_RST,
RST_RESERVED_BITS | val);
+ if (host->data && host->data->flags & MMC_DATA_READ)
+ clear_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags);
+
renesas_sdhi_internal_dmac_enable_dma(host, true);
}
@@ -155,6 +170,9 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host,
if (data->flags & MMC_DATA_READ) {
dtran_mode |= DTRAN_MODE_CH_NUM_CH1;
dir = DMA_FROM_DEVICE;
+ if (test_bit(SDHI_INTERNAL_DMAC_ONE_RX_ONLY, &global_flags) &&
+ test_and_set_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags))
+ goto force_pio;
} else {
dtran_mode |= DTRAN_MODE_CH_NUM_CH0;
dir = DMA_TO_DEVICE;
@@ -208,6 +226,9 @@ static void renesas_sdhi_internal_dmac_complete_tasklet_fn(unsigned long arg)
renesas_sdhi_internal_dmac_enable_dma(host, false);
dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->sg_len, dir);
+ if (dir == DMA_FROM_DEVICE)
+ clear_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags);
+
tmio_mmc_do_data_irq(host);
out:
spin_unlock_irq(&host->lock);
@@ -251,18 +272,24 @@ static const struct tmio_mmc_dma_ops renesas_sdhi_internal_dmac_dma_ops = {
* implementation as others may use a different implementation.
*/
static const struct soc_device_attribute gen3_soc_whitelist[] = {
- { .soc_id = "r8a7795", .revision = "ES1.*" },
- { .soc_id = "r8a7795", .revision = "ES2.0" },
- { .soc_id = "r8a7796", .revision = "ES1.0" },
- { .soc_id = "r8a77995", .revision = "ES1.0" },
- { /* sentinel */ }
+ { .soc_id = "r8a7795", .revision = "ES1.*",
+ .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) },
+ { .soc_id = "r8a7795", .revision = "ES2.0" },
+ { .soc_id = "r8a7796", .revision = "ES1.0",
+ .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) },
+ { .soc_id = "r8a77995", .revision = "ES1.0" },
+ { /* sentinel */ }
};
static int renesas_sdhi_internal_dmac_probe(struct platform_device *pdev)
{
- if (!soc_device_match(gen3_soc_whitelist))
+ const struct soc_device_attribute *soc = soc_device_match(gen3_soc_whitelist);
+
+ if (!soc)
return -ENODEV;
+ global_flags |= (unsigned long)soc->data;
+
return renesas_sdhi_probe(pdev, &renesas_sdhi_internal_dmac_dma_ops);
}
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 787434e5589d..78c25ad35fd2 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1312,7 +1312,7 @@ static void amd_enable_manual_tuning(struct pci_dev *pdev)
pci_write_config_dword(pdev, AMD_SD_MISC_CONTROL, val);
}
-static int amd_execute_tuning(struct sdhci_host *host, u32 opcode)
+static int amd_execute_tuning_hs200(struct sdhci_host *host, u32 opcode)
{
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct pci_dev *pdev = slot->chip->pdev;
@@ -1351,6 +1351,27 @@ static int amd_execute_tuning(struct sdhci_host *host, u32 opcode)
return 0;
}
+static int amd_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ /* AMD requires custom HS200 tuning */
+ if (host->timing == MMC_TIMING_MMC_HS200)
+ return amd_execute_tuning_hs200(host, opcode);
+
+ /* Otherwise perform standard SDHCI tuning */
+ return sdhci_execute_tuning(mmc, opcode);
+}
+
+static int amd_probe_slot(struct sdhci_pci_slot *slot)
+{
+ struct mmc_host_ops *ops = &slot->host->mmc_host_ops;
+
+ ops->execute_tuning = amd_execute_tuning;
+
+ return 0;
+}
+
static int amd_probe(struct sdhci_pci_chip *chip)
{
struct pci_dev *smbus_dev;
@@ -1385,12 +1406,12 @@ static const struct sdhci_ops amd_sdhci_pci_ops = {
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
- .platform_execute_tuning = amd_execute_tuning,
};
static const struct sdhci_pci_fixes sdhci_amd = {
.probe = amd_probe,
.ops = &amd_sdhci_pci_ops,
+ .probe_slot = amd_probe_slot,
};
static const struct pci_device_id pci_ids[] = {
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 02:18:19 +0300