diff options
| -rw-r--r-- | Documentation/vfio-mediated-device.txt | 103 | ||||
| -rw-r--r-- | samples/vfio-mdev/Makefile | 13 | ||||
| -rw-r--r-- | samples/vfio-mdev/mtty.c | 1503 |
3 files changed, 1618 insertions, 1 deletions
diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt index 150958ca4547..b38afec35edc 100644 --- a/Documentation/vfio-mediated-device.txt +++ b/Documentation/vfio-mediated-device.txt @@ -288,8 +288,109 @@ these callbacks are supported in the TYPE1 IOMMU module. To enable them for other IOMMU backend modules, such as PPC64 sPAPR module, they need to provide these two callback functions. +Using the Sample Code +===================== + +mtty.c in samples/vfio-mdev/ directory is a sample driver program to +demonstrate how to use the mediated device framework. + +The sample driver creates an mdev device that simulates a serial port over a PCI +card. + +1. Build and load the mtty.ko module. + + This step creates a dummy device, /sys/devices/virtual/mtty/mtty/ + + Files in this device directory in sysfs are similar to the following: + + # tree /sys/devices/virtual/mtty/mtty/ + /sys/devices/virtual/mtty/mtty/ + |-- mdev_supported_types + | |-- mtty-1 + | | |-- available_instances + | | |-- create + | | |-- device_api + | | |-- devices + | | `-- name + | `-- mtty-2 + | |-- available_instances + | |-- create + | |-- device_api + | |-- devices + | `-- name + |-- mtty_dev + | `-- sample_mtty_dev + |-- power + | |-- autosuspend_delay_ms + | |-- control + | |-- runtime_active_time + | |-- runtime_status + | `-- runtime_suspended_time + |-- subsystem -> ../../../../class/mtty + `-- uevent + +2. Create a mediated device by using the dummy device that you created in the + previous step. + + # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \ + /sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create + +3. Add parameters to qemu-kvm. + + -device vfio-pci,\ + sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001 + +4. Boot the VM. + + In the Linux guest VM, with no hardware on the host, the device appears + as follows: + + # lspci -s 00:05.0 -xxvv + 00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550]) + Subsystem: Device 4348:3253 + Physical Slot: 5 + Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- + Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- + <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin A routed to IRQ 10 + Region 0: I/O ports at c150 [size=8] + Region 1: I/O ports at c158 [size=8] + Kernel driver in use: serial + 00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00 + 10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00 + 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32 + 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 + + In the Linux guest VM, dmesg output for the device is as follows: + + serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ +10 + 0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A + 0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A + + +5. In the Linux guest VM, check the serial ports. + + # setserial -g /dev/ttyS* + /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 + /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10 + /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10 + +6. Using a minicom or any terminal enulation program, open port /dev/ttyS1 or + /dev/ttyS2 with hardware flow control disabled. + +7. Type data on the minicom terminal or send data to the terminal emulation + program and read the data. + + Data is loop backed from hosts mtty driver. + +8. Destroy the mediated device that you created. + + # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove + References ----------- +========== [1] See Documentation/vfio.txt for more information on VFIO. [2] struct mdev_driver in include/linux/mdev.h diff --git a/samples/vfio-mdev/Makefile b/samples/vfio-mdev/Makefile new file mode 100644 index 000000000000..a932edbe38eb --- /dev/null +++ b/samples/vfio-mdev/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for mtty.c file +# +KERNEL_DIR:=/lib/modules/$(shell uname -r)/build + +obj-m:=mtty.o + +modules clean modules_install: + $(MAKE) -C $(KERNEL_DIR) SUBDIRS=$(PWD) $@ + +default: modules + +module: modules diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c new file mode 100644 index 000000000000..6b633a4ea333 --- /dev/null +++ b/samples/vfio-mdev/mtty.c @@ -0,0 +1,1503 @@ +/* + * Mediated virtual PCI serial host device driver + * + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * Author: Neo Jia <cjia@nvidia.com> + * Kirti Wankhede <kwankhede@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Sample driver that creates mdev device that simulates serial port over PCI + * card. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/cdev.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/uuid.h> +#include <linux/vfio.h> +#include <linux/iommu.h> +#include <linux/sysfs.h> +#include <linux/ctype.h> +#include <linux/file.h> +#include <linux/mdev.h> +#include <linux/pci.h> +#include <linux/serial.h> +#include <uapi/linux/serial_reg.h> +#include <linux/eventfd.h> +/* + * #defines + */ + +#define VERSION_STRING "0.1" +#define DRIVER_AUTHOR "NVIDIA Corporation" + +#define MTTY_CLASS_NAME "mtty" + +#define MTTY_NAME "mtty" + +#define MTTY_STRING_LEN 16 + +#define MTTY_CONFIG_SPACE_SIZE 0xff +#define MTTY_IO_BAR_SIZE 0x8 +#define MTTY_MMIO_BAR_SIZE 0x100000 + +#define STORE_LE16(addr, val) (*(u16 *)addr = val) +#define STORE_LE32(addr, val) (*(u32 *)addr = val) + +#define MAX_FIFO_SIZE 16 + +#define CIRCULAR_BUF_INC_IDX(idx) (idx = (idx + 1) & (MAX_FIFO_SIZE - 1)) + +#define MTTY_VFIO_PCI_OFFSET_SHIFT 40 + +#define MTTY_VFIO_PCI_OFFSET_TO_INDEX(off) (off >> MTTY_VFIO_PCI_OFFSET_SHIFT) +#define MTTY_VFIO_PCI_INDEX_TO_OFFSET(index) \ + ((u64)(index) << MTTY_VFIO_PCI_OFFSET_SHIFT) +#define MTTY_VFIO_PCI_OFFSET_MASK \ + (((u64)(1) << MTTY_VFIO_PCI_OFFSET_SHIFT) - 1) +#define MAX_MTTYS 24 + +/* + * Global Structures + */ + +struct mtty_dev { + dev_t vd_devt; + struct class *vd_class; + struct cdev vd_cdev; + struct idr vd_idr; + struct device dev; +} mtty_dev; + +struct mdev_region_info { + u64 start; + u64 phys_start; + u32 size; + u64 vfio_offset; +}; + +#if defined(DEBUG_REGS) +const char *wr_reg[] = { + "TX", + "IER", + "FCR", + "LCR", + "MCR", + "LSR", + "MSR", + "SCR" +}; + +const char *rd_reg[] = { + "RX", + "IER", + "IIR", + "LCR", + "MCR", + "LSR", + "MSR", + "SCR" +}; +#endif + +/* loop back buffer */ +struct rxtx { + u8 fifo[MAX_FIFO_SIZE]; + u8 head, tail; + u8 count; +}; + +struct serial_port { + u8 uart_reg[8]; /* 8 registers */ + struct rxtx rxtx; /* loop back buffer */ + bool dlab; + bool overrun; + u16 divisor; + u8 fcr; /* FIFO control register */ + u8 max_fifo_size; + u8 intr_trigger_level; /* interrupt trigger level */ +}; + +/* State of each mdev device */ +struct mdev_state { + int irq_fd; + struct eventfd_ctx *intx_evtfd; + struct eventfd_ctx *msi_evtfd; + int irq_index; + u8 *vconfig; + struct mutex ops_lock; + struct mdev_device *mdev; + struct mdev_region_info region_info[VFIO_PCI_NUM_REGIONS]; + u32 bar_mask[VFIO_PCI_NUM_REGIONS]; + struct list_head next; + struct serial_port s[2]; + struct mutex rxtx_lock; + struct vfio_device_info dev_info; + int nr_ports; +}; + +struct mutex mdev_list_lock; +struct list_head mdev_devices_list; + +static const struct file_operations vd_fops = { + .owner = THIS_MODULE, +}; + +/* function prototypes */ + +static int mtty_trigger_interrupt(uuid_le uuid); + +/* Helper functions */ +static struct mdev_state *find_mdev_state_by_uuid(uuid_le uuid) +{ + struct mdev_state *mds; + + list_for_each_entry(mds, &mdev_devices_list, next) { + if (uuid_le_cmp(mds->mdev->uuid, uuid) == 0) + return mds; + } + + return NULL; +} + +void dump_buffer(char *buf, uint32_t count) +{ +#if defined(DEBUG) + int i; + + pr_info("Buffer:\n"); + for (i = 0; i < count; i++) { + pr_info("%2x ", *(buf + i)); + if ((i + 1) % 16 == 0) + pr_info("\n"); + } +#endif +} + +static void mtty_create_config_space(struct mdev_state *mdev_state) +{ + /* PCI dev ID */ + STORE_LE32((u32 *) &mdev_state->vconfig[0x0], 0x32534348); + + /* Control: I/O+, Mem-, BusMaster- */ + STORE_LE16((u16 *) &mdev_state->vconfig[0x4], 0x0001); + + /* Status: capabilities list absent */ + STORE_LE16((u16 *) &mdev_state->vconfig[0x6], 0x0200); + + /* Rev ID */ + mdev_state->vconfig[0x8] = 0x10; + + /* programming interface class : 16550-compatible serial controller */ + mdev_state->vconfig[0x9] = 0x02; + + /* Sub class : 00 */ + mdev_state->vconfig[0xa] = 0x00; + + /* Base class : Simple Communication controllers */ + mdev_state->vconfig[0xb] = 0x07; + + /* base address registers */ + /* BAR0: IO space */ + STORE_LE32((u32 *) &mdev_state->vconfig[0x10], 0x000001); + mdev_state->bar_mask[0] = ~(MTTY_IO_BAR_SIZE) + 1; + + if (mdev_state->nr_ports == 2) { + /* BAR1: IO space */ + STORE_LE32((u32 *) &mdev_state->vconfig[0x14], 0x000001); + mdev_state->bar_mask[1] = ~(MTTY_IO_BAR_SIZE) + 1; + } + + /* Subsystem ID */ + STORE_LE32((u32 *) &mdev_state->vconfig[0x2c], 0x32534348); + + mdev_state->vconfig[0x34] = 0x00; /* Cap Ptr */ + mdev_state->vconfig[0x3d] = 0x01; /* interrupt pin (INTA#) */ + + /* Vendor specific data */ + mdev_state->vconfig[0x40] = 0x23; + mdev_state->vconfig[0x43] = 0x80; + mdev_state->vconfig[0x44] = 0x23; + mdev_state->vconfig[0x48] = 0x23; + mdev_state->vconfig[0x4c] = 0x23; + + mdev_state->vconfig[0x60] = 0x50; + mdev_state->vconfig[0x61] = 0x43; + mdev_state->vconfig[0x62] = 0x49; + mdev_state->vconfig[0x63] = 0x20; + mdev_state->vconfig[0x64] = 0x53; + mdev_state->vconfig[0x65] = 0x65; + mdev_state->vconfig[0x66] = 0x72; + mdev_state->vconfig[0x67] = 0x69; + mdev_state->vconfig[0x68] = 0x61; + mdev_state->vconfig[0x69] = 0x6c; + mdev_state->vconfig[0x6a] = 0x2f; + mdev_state->vconfig[0x6b] = 0x55; + mdev_state->vconfig[0x6c] = 0x41; + mdev_state->vconfig[0x6d] = 0x52; + mdev_state->vconfig[0x6e] = 0x54; +} + +static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset, + char *buf, u32 count) +{ + u32 cfg_addr, bar_mask, bar_index = 0; + + switch (offset) { + case 0x04: /* device control */ + case 0x06: /* device status */ + /* do nothing */ + break; + case 0x3c: /* interrupt line */ + mdev_state->vconfig[0x3c] = buf[0]; + break; + case 0x3d: + /* + * Interrupt Pin is hardwired to INTA. + * This field is write protected by hardware + */ + break; + case 0x10: /* BAR0 */ + case 0x14: /* BAR1 */ + if (offset == 0x10) + bar_index = 0; + else if (offset == 0x14) + bar_index = 1; + + if ((mdev_state->nr_ports == 1) && (bar_index == 1)) { + STORE_LE32(&mdev_state->vconfig[offset], 0); + break; + } + + cfg_addr = *(u32 *)buf; + pr_info("BAR%d addr 0x%x\n", bar_index, cfg_addr); + + if (cfg_addr == 0xffffffff) { + bar_mask = mdev_state->bar_mask[bar_index]; + cfg_addr = (cfg_addr & bar_mask); + } + + cfg_addr |= (mdev_state->vconfig[offset] & 0x3ul); + STORE_LE32(&mdev_state->vconfig[offset], cfg_addr); + break; + case 0x18: /* BAR2 */ + case 0x1c: /* BAR3 */ + case 0x20: /* BAR4 */ + STORE_LE32(&mdev_state->vconfig[offset], 0); + break; + default: + pr_info("PCI config write @0x%x of %d bytes not handled\n", + offset, count); + break; + } +} + +static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state, + u16 offset, char *buf, u32 count) +{ + u8 data = *buf; + + /* Handle data written by guest */ + switch (offset) { + case UART_TX: + /* if DLAB set, data is LSB of divisor */ + if (mdev_state->s[index].dlab) { + mdev_state->s[index].divisor |= data; + break; + } + + mutex_lock(&mdev_state->rxtx_lock); + + /* save in TX buffer */ + if (mdev_state->s[index].rxtx.count < + mdev_state->s[index].max_fifo_size) { + mdev_state->s[index].rxtx.fifo[ + mdev_state->s[index].rxtx.head] = data; + mdev_state->s[index].rxtx.count++; + CIRCULAR_BUF_INC_IDX(mdev_state->s[index].rxtx.head); + mdev_state->s[index].overrun = false; + + /* + * Trigger interrupt if receive data interrupt is + * enabled and fifo reached trigger level + */ + if ((mdev_state->s[index].uart_reg[UART_IER] & + UART_IER_RDI) && + (mdev_state->s[index].rxtx.count == + mdev_state->s[index].intr_trigger_level)) { + /* trigger interrupt */ +#if defined(DEBUG_INTR) + pr_err("Serial port %d: Fifo level trigger\n", + index); +#endif + mtty_trigger_interrupt(mdev_state->mdev->uuid); + } + } else { +#if defined(DEBUG_INTR) + pr_err("Serial port %d: Buffer Overflow\n", index); +#endif + mdev_state->s[index].overrun = true; + + /* + * Trigger interrupt if receiver line status interrupt + * is enabled + */ + if (mdev_state->s[index].uart_reg[UART_IER] & + UART_IER_RLSI) + mtty_trigger_interrupt(mdev_state->mdev->uuid); + } + mutex_unlock(&mdev_state->rxtx_lock); + break; + + case UART_IER: + /* if DLAB set, data is MSB of divisor */ + if (mdev_state->s[index].dlab) + mdev_state->s[index].divisor |= (u16)data << 8; + else { + mdev_state->s[index].uart_reg[offset] = data; + mutex_lock(&mdev_state->rxtx_lock); + if ((data & UART_IER_THRI) && + (mdev_state->s[index].rxtx.head == + mdev_state->s[index].rxtx.tail)) { +#if defined(DEBUG_INTR) + pr_err("Serial port %d: IER_THRI write\n", + index); +#endif + mtty_trigger_interrupt(mdev_state->mdev->uuid); + } + + mutex_unlock(&mdev_state->rxtx_lock); + } + + break; + + case UART_FCR: + mdev_state->s[index].fcr = data; + + mutex_lock(&mdev_state->rxtx_lock); + if (data & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT)) { + /* clear loop back FIFO */ + mdev_state->s[index].rxtx.count = 0; + mdev_state->s[index].rxtx.head = 0; + mdev_state->s[index].rxtx.tail = 0; + } + mutex_unlock(&mdev_state->rxtx_lock); + + switch (data & UART_FCR_TRIGGER_MASK) { + case UART_FCR_TRIGGER_1: + mdev_state->s[index].intr_trigger_level = 1; + break; + + case UART_FCR_TRIGGER_4: + mdev_state->s[index].intr_trigger_level = 4; + break; + + case UART_FCR_TRIGGER_8: + mdev_state->s[index].intr_trigger_level = 8; + break; + + case UART_FCR_TRIGGER_14: + mdev_state->s[index].intr_trigger_level = 14; + break; + } + + /* + * Set trigger level to 1 otherwise or implement timer with + * timeout of 4 characters and on expiring that timer set + * Recevice data timeout in IIR register + */ + mdev_state->s[index].intr_trigger_level = 1; + if (data & UART_FCR_ENABLE_FIFO) + mdev_state->s[index].max_fifo_size = MAX_FIFO_SIZE; + else { + mdev_state->s[index].max_fifo_size = 1; + mdev_state->s[index].intr_trigger_level = 1; + } + + break; + + case UART_LCR: + if (data & UART_LCR_DLAB) { + mdev_state->s[index].dlab = true; + mdev_state->s[index].divisor = 0; + } else + mdev_state->s[index].dlab = false; + + mdev_state->s[index].uart_reg[offset] = data; + break; + + case UART_MCR: + mdev_state->s[index].uart_reg[offset] = data; + + if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) && + (data & UART_MCR_OUT2)) { +#if defined(DEBUG_INTR) + pr_err("Serial port %d: MCR_OUT2 write\n", index); +#endif + mtty_trigger_interrupt(mdev_state->mdev->uuid); + } + + if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) && + (data & (UART_MCR_RTS | UART_MCR_DTR))) { +#if defined(DEBUG_INTR) + pr_err("Serial port %d: MCR RTS/DTR write\n", index); +#endif + mtty_trigger_interrupt(mdev_state->mdev->uuid); + } + break; + + case UART_LSR: + case UART_MSR: + /* do nothing */ + break; + + case UART_SCR: + mdev_state->s[index].uart_reg[offset] = data; + break; + + default: + break; + } +} + +static void handle_bar_read(unsigned int index, struct mdev_state *mdev_state, + u16 offset, char *buf, u32 count) +{ + /* Handle read requests by guest */ + switch (offset) { + case UART_RX: + /* if DLAB set, data is LSB of divisor */ + if (mdev_state->s[index].dlab) { + *buf = (u8)mdev_state->s[index].divisor; + break; + } + + mutex_lock(&mdev_state->rxtx_lock); + /* return data in tx buffer */ + if (mdev_state->s[index].rxtx.head != + mdev_state->s[index].rxtx.tail) { + *buf = mdev_state->s[index].rxtx.fifo[ + mdev_state->s[index].rxtx.tail]; + mdev_state->s[index].rxtx.count--; + CIRCULAR_BUF_INC_IDX(mdev_state->s[index].rxtx.tail); + } + + if (mdev_state->s[index].rxtx.head == + mdev_state->s[index].rxtx.tail) { + /* + * Trigger interrupt if tx buffer empty interrupt is + * enabled and fifo is empty + */ +#if defined(DEBUG_INTR) + pr_err("Serial port %d: Buffer Empty\n", index); +#endif + if (mdev_state->s[index].uart_reg[UART_IER] & + UART_IER_THRI) + mtty_trigger_interrupt(mdev_state->mdev->uuid); + } + mutex_unlock(&mdev_state->rxtx_lock); + + break; + + case UART_IER: + if (mdev_state->s[index].dlab) { + *buf = (u8)(mdev_state->s[index].divisor >> 8); + break; + } + *buf = mdev_state->s[index].uart_reg[offset] & 0x0f; + break; + + case UART_IIR: + { + u8 ier = mdev_state->s[index].uart_reg[UART_IER]; + *buf = 0; + + mutex_lock(&mdev_state->rxtx_lock); + /* Interrupt priority 1: Parity, overrun, framing or break */ + if ((ier & UART_IER_RLSI) && mdev_state->s[index].overrun) + *buf |= UART_IIR_RLSI; + + /* Interrupt priority 2: Fifo trigger level reached */ + if ((ier & UART_IER_RDI) && + (mdev_state->s[index].rxtx.count == + mdev_state->s[index].intr_trigger_level)) + *buf |= UART_IIR_RDI; + + /* Interrupt priotiry 3: transmitter holding register empty */ + if ((ier & UART_IER_THRI) && + (mdev_state->s[index].rxtx.head == + mdev_state->s[index].rxtx.tail)) + *buf |= UART_IIR_THRI; + + /* Interrupt priotiry 4: Modem status: CTS, DSR, RI or DCD */ + if ((ier & UART_IER_MSI) && + (mdev_state->s[index].uart_reg[UART_MCR] & + (UART_MCR_RTS | UART_MCR_DTR))) + *buf |= UART_IIR_MSI; + + /* bit0: 0=> interrupt pending, 1=> no interrupt is pending */ + if (*buf == 0) + *buf = UART_IIR_NO_INT; + + /* set bit 6 & 7 to be 16550 compatible */ + *buf |= 0xC0; + mutex_unlock(&mdev_state->rxtx_lock); + } + break; + + case UART_LCR: + case UART_MCR: + *buf = mdev_state->s[index].uart_reg[offset]; + break; + + case UART_LSR: + { + u8 lsr = 0; + + mutex_lock(&mdev_state->rxtx_lock); + /* atleast one char in FIFO */ + if (mdev_state->s[index].rxtx.head != + mdev_state->s[index].rxtx.tail) + lsr |= UART_LSR_DR; + + /* if FIFO overrun */ + if (mdev_state->s[index].overrun) + lsr |= UART_LSR_OE; + + /* transmit FIFO empty and tramsitter empty */ + if (mdev_state->s[index].rxtx.head == + mdev_state->s[index].rxtx.tail) + lsr |= UART_LSR_TEMT | UART_LSR_THRE; + + mutex_unlock(&mdev_state->rxtx_lock); + *buf = lsr; + break; + } + case UART_MSR: + *buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD; + + mutex_lock(&mdev_state->rxtx_lock); + /* if AFE is 1 and FIFO have space, set CTS bit */ + if (mdev_state->s[index].uart_reg[UART_MCR] & + UART_MCR_AFE) { + if (mdev_state->s[index].rxtx.count < + mdev_state->s[index].max_fifo_size) + *buf |= UART_MSR_CTS | UART_MSR_DCTS; + } else + *buf |= UART_MSR_CTS | UART_MSR_DCTS; + mutex_unlock(&mdev_state->rxtx_lock); + + break; + + case UART_SCR: + *buf = mdev_state->s[index].uart_reg[offset]; + break; + + default: + break; + } +} + +static void mdev_read_base(struct mdev_state *mdev_state) +{ + int index, pos; + u32 start_lo, start_hi; + u32 mem_type; + + pos = PCI_BASE_ADDRESS_0; + + for (index = 0; index <= VFIO_PCI_BAR5_REGION_INDEX; index++) { + + if (!mdev_state->region_info[index].size) + continue; + + start_lo = (*(u32 *)(mdev_state->vconfig + pos)) & + PCI_BASE_ADDRESS_MEM_MASK; + mem_type = (*(u32 *)(mdev_state->vconfig + pos)) & + PCI_BASE_ADDRESS_MEM_TYPE_MASK; + + switch (mem_type) { + case PCI_BASE_ADDRESS_MEM_TYPE_64: + start_hi = (*(u32 *)(mdev_state->vconfig + pos + 4)); + pos += 4; + break; + case PCI_BASE_ADDRESS_MEM_TYPE_32: + case PCI_BASE_ADDRESS_MEM_TYPE_1M: + /* 1M mem BAR treated as 32-bit BAR */ + default: + /* mem unknown type treated as 32-bit BAR */ + start_hi = 0; + break; + } + pos += 4; + mdev_state->region_info[index].start = ((u64)start_hi << 32) | + start_lo; + } +} + +static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count, + loff_t pos, bool is_write) +{ + struct mdev_state *mdev_state; + unsigned int index; + loff_t offset; + int ret = 0; + + if (!mdev || !buf) + return -EINVAL; + + mdev_state = mdev_get_drvdata(mdev); + if (!mdev_state) { + pr_err("%s mdev_state not found\n", __func__); + return -EINVAL; + } + + mutex_lock(&mdev_state->ops_lock); + + index = MTTY_VFIO_PCI_OFFSET_TO_INDEX(pos); + offset = pos & MTTY_VFIO_PCI_OFFSET_MASK; + switch (index) { + case VFIO_PCI_CONFIG_REGION_INDEX: + +#if defined(DEBUG) + pr_info("%s: PCI config space %s at offset 0x%llx\n", + __func__, is_write ? "write" : "read", offset); +#endif + if (is_write) { + dump_buffer(buf, count); + handle_pci_cfg_write(mdev_state, offset, buf, count); + } else { + memcpy(buf, (mdev_state->vconfig + offset), count); + dump_buffer(buf, count); + } + + break; + + case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX: + if (!mdev_state->region_info[index].start) + mdev_read_base(mdev_state); + + if (is_write) { + dump_buffer(buf, count); + +#if defined(DEBUG_REGS) + pr_info("%s: BAR%d WR @0x%llx %s val:0x%02x dlab:%d\n", + __func__, index, offset, wr_reg[offset], + (u8)*buf, mdev_state->s[index].dlab); +#endif + handle_bar_write(index, mdev_state, offset, buf, count); + } else { + handle_bar_read(index, mdev_state, offset, buf, count); + dump_buffer(buf, count); + +#if defined(DEBUG_REGS) + pr_info("%s: BAR%d RD @0x%llx %s val:0x%02x dlab:%d\n", + __func__, index, offset, rd_reg[offset], + (u8)*buf, mdev_state->s[index].dlab); +#endif + } + break; + + default: + ret = -1; + goto accessfailed; + } + + ret = count; + + +accessfailed: + mutex_unlock(&mdev_state->ops_lock); + + return ret; +} + +int mtty_create(struct kobject *kobj, struct mdev_device *mdev) +{ + struct mdev_state *mdev_state; + char name[MTTY_STRING_LEN]; + int nr_ports = 0, i; + + if (!mdev) + return -EINVAL; + + for (i = 0; i < 2; i++) { + snprintf(name, MTTY_STRING_LEN, "%s-%d", + dev_driver_string(mdev->parent->dev), i + 1); + if (!strcmp(kobj->name, name)) { + nr_ports = i + 1; + break; + } + } + + if (!nr_ports) + return -EINVAL; + + mdev_state = kzalloc(sizeof(struct mdev_state), GFP_KERNEL); + if (mdev_state == NULL) + return -ENOMEM; + + mdev_state->nr_ports = nr_ports; + mdev_state->irq_index = -1; + mdev_state->s[0].max_fifo_size = MAX_FIFO_SIZE; + mdev_state->s[1].max_fifo_size = MAX_FIFO_SIZE; + mutex_init(&mdev_state->rxtx_lock); + mdev_state->vconfig = kzalloc(MTTY_CONFIG_SPACE_SIZE, GFP_KERNEL); + + if (mdev_state->vconfig == NULL) { + kfree(mdev_state); + return -ENOMEM; + } + + mutex_init(&mdev_state->ops_lock); + mdev_state->mdev = mdev; + mdev_set_drvdata(mdev, mdev_state); + + mtty_create_config_space(mdev_state); + + mutex_lock(&mdev_list_lock); + list_add(&mdev_state->next, &mdev_devices_list); + mutex_unlock(&mdev_list_lock); + + return 0; +} + +int mtty_remove(struct mdev_device *mdev) +{ + struct mdev_state *mds, *tmp_mds; + struct mdev_state *mdev_state = mdev_get_drvdata(mdev); + int ret = -EINVAL; + + mutex_lock(&mdev_list_lock); + list_for_each_entry_safe(mds, tmp_mds, &mdev_devices_list, next) { + if (mdev_state == mds) { + list_del(&mdev_state->next); + mdev_set_drvdata(mdev, NULL); + kfree(mdev_state->vconfig); + kfree(mdev_state); + ret = 0; + break; + } + } + mutex_unlock(&mdev_list_lock); + + return ret; +} + +int mtty_reset(struct mdev_device *mdev) +{ + struct mdev_state *mdev_state; + + if (!mdev) + return -EINVAL; + + mdev_state = mdev_get_drvdata(mdev); + if (!mdev_state) + return -EINVAL; + + pr_info("%s: called\n", __func__); + + return 0; +} + +ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count, + loff_t *ppos) +{ + unsigned int done = 0; + int ret; + + while (count) { + size_t filled; + + if (count >= 4 && !(*ppos % 4)) { + u32 val; + + ret = mdev_access(mdev, (char *)&val, sizeof(val), + *ppos, false); + if (ret <= 0) + goto read_err; + + if (copy_to_user(buf, &val, sizeof(val))) + goto read_err; + + filled = 4; + } else if (count >= 2 && !(*ppos % 2)) { + u16 val; + + ret = mdev_access(mdev, (char *)&val, sizeof(val), + *ppos, false); + if (ret <= 0) + goto read_err; + + if (copy_to_user(buf, &val, sizeof(val))) + goto read_err; + + filled = 2; + } else { + u8 val; + + ret = mdev_access(mdev, (char *)&val, sizeof(val), + *ppos, false); + if (ret <= 0) + goto read_err; + + if (copy_to_user(buf, &val, sizeof(val))) + goto read_err; + + filled = 1; + } + + count -= filled; + done += filled; + *ppos += filled; + buf += filled; + } + + return done; + +read_err: + return -EFAULT; +} + +ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf, + size_t count, loff_t *ppos) +{ + unsigned int done = 0; + int ret; + + while (count) { + size_t filled; + + if (count >= 4 && !(*ppos % 4)) { + u32 val; + + if (copy_from_user(&val, buf, sizeof(val))) + goto write_err; + + ret = mdev_access(mdev, (char *)&val, sizeof(val), + *ppos, true); + if (ret <= 0) + goto write_err; + + filled = 4; + } else if (count >= 2 && !(*ppos % 2)) { + u16 val; + + if (copy_from_user(&val, buf, sizeof(val))) + goto write_err; + + ret = mdev_access(mdev, (char *)&val, sizeof(val), + *ppos, true); + if (ret <= 0) + goto write_err; + + filled = 2; + } else { + u8 val; + + if (copy_from_user(&val, buf, sizeof(val))) + goto write_err; + + ret = mdev_access(mdev, (char *)&val, sizeof(val), + *ppos, true); + if (ret <= 0) + goto write_err; + + filled = 1; + } + count -= filled; + done += filled; + *ppos += filled; + buf += filled; + } + + return done; +write_err: + return -EFAULT; +} + +static int mtty_set_irqs(struct mdev_device *mdev, uint32_t flags, + unsigned int index, unsigned int start, + unsigned int count, void *data) +{ + int ret = 0; + struct mdev_state *mdev_state; + + if (!mdev) + return -EINVAL; + + mdev_state = mdev_get_drvdata(mdev); + if (!mdev_state) + return -EINVAL; + + mutex_lock(&mdev_state->ops_lock); + switch (index) { + case VFIO_PCI_INTX_IRQ_INDEX: + switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) { + case VFIO_IRQ_SET_ACTION_MASK: + case VFIO_IRQ_SET_ACTION_UNMASK: + break; + case VFIO_IRQ_SET_ACTION_TRIGGER: + { + if (flags & VFIO_IRQ_SET_DATA_NONE) { + pr_info("%s: disable INTx\n", __func__); + if (mdev_state->intx_evtfd) + eventfd_ctx_put(mdev_state->intx_evtfd); + break; + } + + if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { + int fd = *(int *)data; + + if (fd > 0) { + struct eventfd_ctx *evt; + + evt = eventfd_ctx_fdget(fd); + if (IS_ERR(evt)) { + ret = PTR_ERR(evt); + break; + } + mdev_state->intx_evtfd = evt; + mdev_state->irq_fd = fd; + mdev_state->irq_index = index; + break; + } + } + break; + } + } + break; + case VFIO_PCI_MSI_IRQ_INDEX: + switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) { + case VFIO_IRQ_SET_ACTION_MASK: + case VFIO_IRQ_SET_ACTION_UNMASK: + break; + case VFIO_IRQ_SET_ACTION_TRIGGER: + if (flags & VFIO_IRQ_SET_DATA_NONE) { + if (mdev_state->msi_evtfd) + eventfd_ctx_put(mdev_state->msi_evtfd); + pr_info("%s: disable MSI\n", __func__); + mdev_state->irq_index = VFIO_PCI_INTX_IRQ_INDEX; + break; + } + if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { + int fd = *(int *)data; + struct eventfd_ctx *evt; + + if (fd <= 0) + break; + + if (mdev_state->msi_evtfd) + break; + + evt = eventfd_ctx_fdget(fd); + if (IS_ERR(evt)) { + ret = PTR_ERR(evt); + break; + } + mdev_state->msi_evtfd = evt; + mdev_state->irq_fd = fd; + mdev_state->irq_index = index; + } + break; + } + break; + case VFIO_PCI_MSIX_IRQ_INDEX: + pr_info("%s: MSIX_IRQ\n", __func__); + break; + case VFIO_PCI_ERR_IRQ_INDEX: + pr_info("%s: ERR_IRQ\n", __func__); + break; + case VFIO_PCI_REQ_IRQ_INDEX: + pr_info("%s: REQ_IRQ\n", __func__); + break; + } + + mutex_unlock(&mdev_state->ops_lock); + return ret; +} + +static int mtty_trigger_interrupt(uuid_le uuid) +{ + int ret = -1; + struct mdev_state *mdev_state; + + mdev_state = find_mdev_state_by_uuid(uuid); + + if (!mdev_state) { + pr_info("%s: mdev not found\n", __func__); + return -EINVAL; + } + + if ((mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX) && + (!mdev_state->msi_evtfd)) + return -EINVAL; + else if ((mdev_state->irq_index == VFIO_PCI_INTX_IRQ_INDEX) && + (!mdev_state->intx_evtfd)) { + pr_info("%s: Intr eventfd not found\n", __func__); + return -EINVAL; + } + + if (mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX) + ret = eventfd_signal(mdev_state->msi_evtfd, 1); + else + ret = eventfd_signal(mdev_state->intx_evtfd, 1); + +#if defined(DEBUG_INTR) + pr_info("Intx triggered\n"); +#endif + if (ret != 1) + pr_err("%s: eventfd signal failed (%d)\n", __func__, ret); + + return ret; +} + +int mtty_get_region_info(struct mdev_device *mdev, + struct vfio_region_info *region_info, + u16 *cap_type_id, void **cap_type) +{ + unsigned int size = 0; + struct mdev_state *mdev_state; + int bar_index; + + if (!mdev) + return -EINVAL; + + mdev_state = mdev_get_drvdata(mdev); + if (!mdev_state) + return -EINVAL; + + mutex_lock(&mdev_state->ops_lock); + bar_index = region_info->index; + + switch (bar_index) { + case VFIO_PCI_CONFIG_REGION_INDEX: + size = MTTY_CONFIG_SPACE_SIZE; + break; + case VFIO_PCI_BAR0_REGION_INDEX: + size = MTTY_IO_BAR_SIZE; + break; + case VFIO_PCI_BAR1_REGION_INDEX: + if (mdev_state->nr_ports == 2) + size = MTTY_IO_BAR_SIZE; + break; + default: + size = 0; + break; + } + + mdev_state->region_info[bar_index].size = size; + mdev_state->region_info[bar_index].vfio_offset = + MTTY_VFIO_PCI_INDEX_TO_OFFSET(bar_index); + + region_info->size = size; + region_info->offset = MTTY_VFIO_PCI_INDEX_TO_OFFSET(bar_index); + region_info->flags = VFIO_REGION_INFO_FLAG_READ | + VFIO_REGION_INFO_FLAG_WRITE; + mutex_unlock(&mdev_state->ops_lock); + return 0; +} + +int mtty_get_irq_info(struct mdev_device *mdev, struct vfio_irq_info *irq_info) +{ + switch (irq_info->index) { + case VFIO_PCI_INTX_IRQ_INDEX: + case VFIO_PCI_MSI_IRQ_INDEX: + case VFIO_PCI_REQ_IRQ_INDEX: + break; + + default: + return -EINVAL; + } + + irq_info->flags = VFIO_IRQ_INFO_EVENTFD; + irq_info->count = 1; + + if (irq_info->index == VFIO_PCI_INTX_IRQ_INDEX) + irq_info->flags |= (VFIO_IRQ_INFO_MASKABLE | + VFIO_IRQ_INFO_AUTOMASKED); + else + irq_info->flags |= VFIO_IRQ_INFO_NORESIZE; + + return 0; +} + +int mtty_get_device_info(struct mdev_device *mdev, + struct vfio_device_info *dev_info) +{ + dev_info->flags = VFIO_DEVICE_FLAGS_PCI; + dev_info->num_regions = VFIO_PCI_NUM_REGIONS; + dev_info->num_irqs = VFIO_PCI_NUM_IRQS; + + return 0; +} + +static long mtty_ioctl(struct mdev_device *mdev, unsigned int cmd, + unsigned long arg) +{ + int ret = 0; + unsigned long minsz; + struct mdev_state *mdev_state; + + if (!mdev) + return -EINVAL; + + mdev_state = mdev_get_drvdata(mdev); + if (!mdev_state) + return -ENODEV; + + switch (cmd) { + case VFIO_DEVICE_GET_INFO: + { + struct vfio_device_info info; + + minsz = offsetofend(struct vfio_device_info, num_irqs); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if (info.argsz < minsz) + return -EINVAL; + + ret = mtty_get_device_info(mdev, &info); + if (ret) + return ret; + + memcpy(&mdev_state->dev_info, &info, sizeof(info)); + + return copy_to_user((void __user *)arg, &info, minsz); + } + case VFIO_DEVICE_GET_REGION_INFO: + { + struct vfio_region_info info; + u16 cap_type_id = 0; + void *cap_type = NULL; + + minsz = offsetofend(struct vfio_region_info, offset); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if (info.argsz < minsz) + return -EINVAL; + + ret = mtty_get_region_info(mdev, &info, &cap_type_id, + &cap_type); + if (ret) + return ret; + + return copy_to_user((void __user *)arg, &info, minsz); + } + + case VFIO_DEVICE_GET_IRQ_INFO: + { + struct vfio_irq_info info; + + minsz = offsetofend(struct vfio_irq_info, count); + + if (copy_from_user(&info, (void __user *)arg, minsz)) + return -EFAULT; + + if ((info.argsz < minsz) || + (info.index >= mdev_state->dev_info.num_irqs)) + return -EINVAL; + + ret = mtty_get_irq_info(mdev, &info); + if (ret) + return ret; + + if (info.count == -1) + return -EINVAL; + + return copy_to_user((void __user *)arg, &info, minsz); + } + case VFIO_DEVICE_SET_IRQS: + { + struct vfio_irq_set hdr; + u8 *data = NULL, *ptr = NULL; + size_t data_size = 0; + + minsz = offsetofend(struct vfio_irq_set, count); + + if (copy_from_user(&hdr, (void __user *)arg, minsz)) + return -EFAULT; + + ret = vfio_set_irqs_validate_and_prepare(&hdr, + mdev_state->dev_info.num_irqs, + VFIO_PCI_NUM_IRQS, + &data_size); + if (ret) + return ret; + + if (data_size) { + ptr = data = memdup_user((void __user *)(arg + minsz), + data_size); + if (IS_ERR(data)) + return PTR_ERR(data); + } + + ret = mtty_set_irqs(mdev, hdr.flags, hdr.index, hdr.start, + hdr.count, data); + + kfree(ptr); + return ret; + } + case VFIO_DEVICE_RESET: + return mtty_reset(mdev); + } + return -ENOTTY; +} + +int mtty_open(struct mdev_device *mdev) +{ + pr_info("%s\n", __func__); + return 0; +} + +void mtty_close(struct mdev_device *mdev) +{ + pr_info("%s\n", __func__); +} + +static ssize_t +sample_mtty_dev_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "This is phy device\n"); +} + +static DEVICE_ATTR_RO(sample_mtty_dev); + +static struct attribute *mtty_dev_attrs[] = { + &dev_attr_sample_mtty_dev.attr, + NULL, +}; + +static const struct attribute_group mtty_dev_group = { + .name = "mtty_dev", + .attrs = mtty_dev_attrs, +}; + +const struct attribute_group *mtty_dev_groups[] = { + &mtty_dev_group, + NULL, +}; + +static ssize_t +sample_mdev_dev_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mdev_device *mdev = to_mdev_device(dev); + + if (mdev) + return sprintf(buf, "This is MDEV %s\n", dev_name(&mdev->dev)); + + return sprintf(buf, "\n"); +} + +static DEVICE_ATTR_RO(sample_mdev_dev); + +static struct attribute *mdev_dev_attrs[] = { + &dev_attr_sample_mdev_dev.attr, + NULL, +}; + +static const struct attribute_group mdev_dev_group = { + .name = "vendor", + .attrs = mdev_dev_attrs, +}; + +const struct attribute_group *mdev_dev_groups[] = { + &mdev_dev_group, + NULL, +}; + +static ssize_t +name_show(struct kobject *kobj, struct device *dev, char *buf) +{ + char name[MTTY_STRING_LEN]; + int i; + const char *name_str[2] = {"Single port serial", "Dual port serial"}; + + for (i = 0; i < 2; i++) { + snprintf(name, MTTY_STRING_LEN, "%s-%d", + dev_driver_string(dev), i + 1); + if (!strcmp(kobj->name, name)) + return sprintf(buf, "%s\n", name_str[i]); + } + + return -EINVAL; +} + +MDEV_TYPE_ATTR_RO(name); + +static ssize_t +available_instances_show(struct kobject *kobj, struct device *dev, char *buf) +{ + char name[MTTY_STRING_LEN]; + int i; + struct mdev_state *mds; + int ports = 0, used = 0; + + for (i = 0; i < 2; i++) { + snprintf(name, MTTY_STRING_LEN, "%s-%d", + dev_driver_string(dev), i + 1); + if (!strcmp(kobj->name, name)) { + ports = i + 1; + break; + } + } + + if (!ports) + return -EINVAL; + + list_for_each_entry(mds, &mdev_devices_list, next) + used += mds->nr_ports; + + return sprintf(buf, "%d\n", (MAX_MTTYS - used)/ports); +} + +MDEV_TYPE_ATTR_RO(available_instances); + + +static ssize_t device_api_show(struct kobject *kobj, struct device *dev, + char *buf) +{ + return sprintf(buf, "%s\n", VFIO_DEVICE_API_PCI_STRING); +} + +MDEV_TYPE_ATTR_RO(device_api); + +static struct attribute *mdev_types_attrs[] = { + &mdev_type_attr_name.attr, + &mdev_type_attr_device_api.attr, + &mdev_type_attr_available_instances.attr, + NULL, +}; + +static struct attribute_group mdev_type_group1 = { + .name = "1", + .attrs = mdev_types_attrs, +}; + +static struct attribute_group mdev_type_group2 = { + .name = "2", + .attrs = mdev_types_attrs, +}; + +struct attribute_group *mdev_type_groups[] = { + &mdev_type_group1, + &mdev_type_group2, + NULL, +}; + +struct parent_ops mdev_fops = { + .owner = THIS_MODULE, + .dev_attr_groups = mtty_dev_groups, + .mdev_attr_groups = mdev_dev_groups, + .supported_type_groups = mdev_type_groups, + .create = mtty_create, + .remove = mtty_remove, + .open = mtty_open, + .release = mtty_close, + .read = mtty_read, + .write = mtty_write, + .ioctl = mtty_ioctl, +}; + +static void mtty_device_release(struct device *dev) +{ + dev_dbg(dev, "mtty: released\n"); +} + +static int __init mtty_dev_init(void) +{ + int ret = 0; + + pr_info("mtty_dev: %s\n", __func__); + + memset(&mtty_dev, 0, sizeof(mtty_dev)); + + idr_init(&mtty_dev.vd_idr); + + ret = alloc_chrdev_region(&mtty_dev.vd_devt, 0, MINORMASK, MTTY_NAME); + + if (ret < 0) { + pr_err("Error: failed to register mtty_dev, err:%d\n", ret); + return ret; + } + + cdev_init(&mtty_dev.vd_cdev, &vd_fops); + cdev_add(&mtty_dev.vd_cdev, mtty_dev.vd_devt, MINORMASK); + + pr_info("major_number:%d\n", MAJOR(mtty_dev.vd_devt)); + + mtty_dev.vd_class = class_create(THIS_MODULE, MTTY_CLASS_NAME); + + if (IS_ERR(mtty_dev.vd_class)) { + pr_err("Error: failed to register mtty_dev class\n"); + goto failed1; + } + + mtty_dev.dev.class = mtty_dev.vd_class; + mtty_dev.dev.release = mtty_device_release; + dev_set_name(&mtty_dev.dev, "%s", MTTY_NAME); + + ret = device_register(&mtty_dev.dev); + if (ret) + goto failed2; + + if (mdev_register_device(&mtty_dev.dev, &mdev_fops) != 0) + goto failed3; + + mutex_init(&mdev_list_lock); + INIT_LIST_HEAD(&mdev_devices_list); + + goto all_done; + +failed3: + + device_unregister(&mtty_dev.dev); +failed2: + class_destroy(mtty_dev.vd_class); + +failed1: + cdev_del(&mtty_dev.vd_cdev); + unregister_chrdev_region(mtty_dev.vd_devt, MINORMASK); + +all_done: + return ret; +} + +static void __exit mtty_dev_exit(void) +{ + mtty_dev.dev.bus = NULL; + mdev_unregister_device(&mtty_dev.dev); + + device_unregister(&mtty_dev.dev); + idr_destroy(&mtty_dev.vd_idr); + cdev_del(&mtty_dev.vd_cdev); + unregister_chrdev_region(mtty_dev.vd_devt, MINORMASK); + class_destroy(mtty_dev.vd_class); + mtty_dev.vd_class = NULL; + pr_info("mtty_dev: Unloaded!\n"); +} + +module_init(mtty_dev_init) +module_exit(mtty_dev_exit) + +MODULE_LICENSE("GPL v2"); +MODULE_INFO(supported, "Test driver that simulate serial port over PCI"); +MODULE_VERSION(VERSION_STRING); +MODULE_AUTHOR(DRIVER_AUTHOR); |