diff options
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts | 178 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 5 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/board-dt.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/board-mss2.c | 90 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/common.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/mss2-setup.c | 274 |
8 files changed, 282 insertions, 277 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 59397c267382..629eee22e606 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -291,6 +291,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts new file mode 100644 index 000000000000..ff3484904294 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Maxtor Shared Storage II"; + compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_misc>; + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + /* + * MPP0: Power LED + * MPP1: Error LED + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + /* + * MPP4: HDD ind. (Single/Dual) + * MPP5: HD0 5V control + * MPP6: HD0 12V control + * MPP7: HD1 5V control + * MPP8: HD1 12V control + */ + pmx_misc: pmx-misc { + marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 3c4ad83c782a..2412efb6cdd9 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -129,8 +129,9 @@ config MACH_NET2BIG Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. -config MACH_MSS2 - bool "Maxtor Shared Storage II" +config MACH_MSS2_DT + bool "Maxtor Shared Storage II (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 787dcee96806..a40b5c9a58c4 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o -obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o @@ -22,4 +21,5 @@ obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o +obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 78d2e528f982..35d418faf8f1 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -61,6 +61,9 @@ static void __init orion5x_dt_init(void) cpu_idle_poll_ctrl(true); } + if (of_machine_is_compatible("maxtor,shared-storage-2")) + mss2_init(); + of_platform_populate(NULL, of_default_bus_match_table, orion5x_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c new file mode 100644 index 000000000000..66f9c3ba86cc --- /dev/null +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -0,0 +1,90 @@ +/* + * Maxtor Shared Storage II Board Setup + * + * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <mach/bridge-regs.h> +#include "common.h" + +/***************************************************************************** + * Maxtor Shared Storage II Info + ****************************************************************************/ + +/**************************************************************************** + * PCI setup + ****************************************************************************/ +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + return -1; +} + +static struct hw_pci mss2_pci __initdata = { + .nr_controllers = 2, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = mss2_pci_map_irq, +}; + +static int __init mss2_pci_init(void) +{ + if (machine_is_mss2()) + pci_common_init(&mss2_pci); + + return 0; +} +subsys_initcall(mss2_pci_init); + +/***************************************************************************** + * MSS2 power off method + ****************************************************************************/ +/* + * On the Maxtor Shared Storage II, the shutdown process is the following : + * - Userland modifies U-boot env to tell U-boot to go idle at next boot + * - The board reboots + * - U-boot starts and go into an idle mode until the user press "power" + */ +static void mss2_power_off(void) +{ + u32 reg; + + /* + * Enable and issue soft reset + */ + reg = readl(RSTOUTn_MASK); + reg |= 1 << 2; + writel(reg, RSTOUTn_MASK); + + reg = readl(CPU_SOFT_RESET); + reg |= 1; + writel(reg, CPU_SOFT_RESET); +} + +void __init mss2_init(void) +{ + /* register mss2 specific power-off method */ + pm_power_off = mss2_power_off; +} diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 7d64a17a3943..db7e056493a0 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -68,6 +68,12 @@ struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); +#ifdef CONFIG_MACH_MSS2_DT +extern void mss2_init(void); +#else +static inline void mss2_init(void) {} +#endif + /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c deleted file mode 100644 index e105130ba51c..000000000000 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Maxtor Shared Storage II Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> -#include "common.h" -#include "mpp.h" - -#define MSS2_NOR_BOOT_BASE 0xff800000 -#define MSS2_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * Maxtor Shared Storage II Info - ****************************************************************************/ - -/* - * Maxtor Shared Storage II hardware : - * - Marvell 88F5182-A2 C500 - * - Marvell 88E1111 Gigabit Ethernet PHY - * - RTC M41T81 (@0x68) on I2C bus - * - 256KB NOR flash - * - 64MB of RAM - */ - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data mss2_nor_flash_data = { - .width = 1, -}; - -static struct resource mss2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MSS2_NOR_BOOT_BASE, - .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device mss2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mss2_nor_flash_data, - }, - .resource = &mss2_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * PCI setup - ****************************************************************************/ -static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci mss2_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = mss2_pci_map_irq, -}; - -static int __init mss2_pci_init(void) -{ - if (machine_is_mss2()) - pci_common_init(&mss2_pci); - - return 0; -} -subsys_initcall(mss2_pci_init); - - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data mss2_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data mss2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO buttons - ****************************************************************************/ - -#define MSS2_GPIO_KEY_RESET 12 -#define MSS2_GPIO_KEY_POWER 11 - -static struct gpio_keys_button mss2_buttons[] = { - { - .code = KEY_POWER, - .gpio = MSS2_GPIO_KEY_POWER, - .desc = "Power", - .active_low = 1, - }, { - .code = KEY_RESTART, - .gpio = MSS2_GPIO_KEY_RESET, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mss2_button_data = { - .buttons = mss2_buttons, - .nbuttons = ARRAY_SIZE(mss2_buttons), -}; - -static struct platform_device mss2_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mss2_button_data, - }, -}; - -/***************************************************************************** - * RTC m41t81 on I2C bus - ****************************************************************************/ - -#define MSS2_GPIO_RTC_IRQ 3 - -static struct i2c_board_info __initdata mss2_i2c_rtc = { - I2C_BOARD_INFO("m41t81", 0x68), -}; - -/***************************************************************************** - * MSS2 power off method - ****************************************************************************/ -/* - * On the Maxtor Shared Storage II, the shutdown process is the following : - * - Userland modifies U-boot env to tell U-boot to go idle at next boot - * - The board reboots - * - U-boot starts and go into an idle mode until the user press "power" - */ -static void mss2_power_off(void) -{ - u32 reg; - - /* - * Enable and issue soft reset - */ - reg = readl(RSTOUTn_MASK); - reg |= 1 << 2; - writel(reg, RSTOUTn_MASK); - - reg = readl(CPU_SOFT_RESET); - reg |= 1; - writel(reg, CPU_SOFT_RESET); -} - -/**************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int mss2_mpp_modes[] __initdata = { - MPP0_GPIO, /* Power LED */ - MPP1_GPIO, /* Error LED */ - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_GPIO, /* HDD ind. (Single/Dual)*/ - MPP5_GPIO, /* HD0 5V control */ - MPP6_GPIO, /* HD0 12V control */ - MPP7_GPIO, /* HD1 5V control */ - MPP8_GPIO, /* HD1 12V control */ - MPP9_UNUSED, - MPP10_GPIO, /* Fan control */ - MPP11_GPIO, /* Power button */ - MPP12_GPIO, /* Reset button */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init mss2_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - orion5x_mpp_conf(mss2_mpp_modes); - - /* - * MPP[20] Unused - * MPP[21] PCI clock - * MPP[22] USB 0 over current - * MPP[23] USB 1 over current - */ - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&mss2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&mss2_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - MSS2_NOR_BOOT_BASE, - MSS2_NOR_BOOT_SIZE); - platform_device_register(&mss2_nor_flash); - - platform_device_register(&mss2_button_device); - - if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) { - if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0) - mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ); - else - gpio_free(MSS2_GPIO_RTC_IRQ); - } - i2c_register_board_info(0, &mss2_i2c_rtc, 1); - - /* register mss2 specific power-off method */ - pm_power_off = mss2_power_off; -} - -MACHINE_START(MSS2, "Maxtor Shared Storage II") - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .atag_offset = 0x100, - .init_machine = mss2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END |