diff options
-rw-r--r-- | net/mac80211/cfg.c | 3 | ||||
-rw-r--r-- | net/mac80211/ieee80211_i.h | 4 | ||||
-rw-r--r-- | net/mac80211/mlme.c | 17 | ||||
-rw-r--r-- | net/mac80211/rx.c | 3 | ||||
-rw-r--r-- | net/mac80211/util.c | 113 | ||||
-rw-r--r-- | net/mac80211/vht.c | 10 | ||||
-rw-r--r-- | net/rfkill/core.c | 6 | ||||
-rw-r--r-- | net/wireless/nl80211.c | 5 | ||||
-rw-r--r-- | net/wireless/reg.c | 5 |
9 files changed, 92 insertions, 74 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index da471eef07bb..c12f348138ac 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1169,8 +1169,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, * rc isn't initialized here yet, so ignore it */ __ieee80211_vht_handle_opmode(sdata, sta, - params->opmode_notif, - band, false); + params->opmode_notif, band); } if (ieee80211_vif_is_mesh(&sdata->vif)) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d832bd59236b..5322b4c71630 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1709,10 +1709,10 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band, bool nss_only); + enum ieee80211_band band); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band, bool nss_only); + enum ieee80211_band band); void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_vht_cap *vht_cap); void ieee80211_get_vht_mask_from_cap(__le16 vht_cap, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b140cc6651f4..3aa04344942b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1379,21 +1379,26 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, */ if (has_80211h_pwr && (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { + new_ap_level = pwr_level_80211h; + + if (sdata->ap_power_level == new_ap_level) + return 0; + sdata_dbg(sdata, "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", pwr_level_80211h, chan_pwr, pwr_reduction_80211h, sdata->u.mgd.bssid); - new_ap_level = pwr_level_80211h; } else { /* has_cisco_pwr is always true here. */ + new_ap_level = pwr_level_cisco; + + if (sdata->ap_power_level == new_ap_level) + return 0; + sdata_dbg(sdata, "Limiting TX power to %d dBm as advertised by %pM\n", pwr_level_cisco, sdata->u.mgd.bssid); - new_ap_level = pwr_level_cisco; } - if (sdata->ap_power_level == new_ap_level) - return 0; - sdata->ap_power_level = new_ap_level; if (__ieee80211_recalc_txpower(sdata)) return BSS_CHANGED_TXPOWER; @@ -3575,7 +3580,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (sta && elems.opmode_notif) ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, - rx_status->band, true); + rx_status->band); mutex_unlock(&local->sta_mtx); changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 8bae5de0dc44..82af407fea7a 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2736,8 +2736,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; ieee80211_vht_handle_opmode(rx->sdata, rx->sta, - opmode, status->band, - false); + opmode, status->band); goto handled; } default: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 74058020b7d6..33344f5a66a8 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1641,6 +1641,29 @@ void ieee80211_stop_device(struct ieee80211_local *local) drv_stop(local); } +static void ieee80211_flush_completed_scan(struct ieee80211_local *local, + bool aborted) +{ + /* It's possible that we don't handle the scan completion in + * time during suspend, so if it's still marked as completed + * here, queue the work and flush it to clean things up. + * Instead of calling the worker function directly here, we + * really queue it to avoid potential races with other flows + * scheduling the same work. + */ + if (test_bit(SCAN_COMPLETED, &local->scanning)) { + /* If coming from reconfiguration failure, abort the scan so + * we don't attempt to continue a partial HW scan - which is + * possible otherwise if (e.g.) the 2.4 GHz portion was the + * completed scan, and a 5 GHz portion is still pending. + */ + if (aborted) + set_bit(SCAN_ABORTED, &local->scanning); + ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0); + flush_delayed_work(&local->scan_work); + } +} + static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; @@ -1660,6 +1683,8 @@ static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local) local->suspended = false; local->in_reconfig = false; + ieee80211_flush_completed_scan(local, true); + /* scheduled scan clearly can't be running any more, but tell * cfg80211 and clear local state */ @@ -1698,6 +1723,27 @@ static void ieee80211_assign_chanctx(struct ieee80211_local *local, mutex_unlock(&local->chanctx_mtx); } +static void ieee80211_reconfig_stations(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct sta_info *sta; + + /* add STAs back */ + mutex_lock(&local->sta_mtx); + list_for_each_entry(sta, &local->sta_list, list) { + enum ieee80211_sta_state state; + + if (!sta->uploaded || sta->sdata != sdata) + continue; + + for (state = IEEE80211_STA_NOTEXIST; + state < sta->sta_state; state++) + WARN_ON(drv_sta_state(local, sta->sdata, sta, state, + state + 1)); + } + mutex_unlock(&local->sta_mtx); +} + int ieee80211_reconfig(struct ieee80211_local *local) { struct ieee80211_hw *hw = &local->hw; @@ -1833,50 +1879,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) WARN_ON(drv_add_chanctx(local, ctx)); mutex_unlock(&local->chanctx_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (!ieee80211_sdata_running(sdata)) - continue; - ieee80211_assign_chanctx(local, sdata); - } - sdata = rtnl_dereference(local->monitor_sdata); if (sdata && ieee80211_sdata_running(sdata)) ieee80211_assign_chanctx(local, sdata); } - /* add STAs back */ - mutex_lock(&local->sta_mtx); - list_for_each_entry(sta, &local->sta_list, list) { - enum ieee80211_sta_state state; - - if (!sta->uploaded) - continue; - - /* AP-mode stations will be added later */ - if (sta->sdata->vif.type == NL80211_IFTYPE_AP) - continue; - - for (state = IEEE80211_STA_NOTEXIST; - state < sta->sta_state; state++) - WARN_ON(drv_sta_state(local, sta->sdata, sta, state, - state + 1)); - } - mutex_unlock(&local->sta_mtx); - - /* reconfigure tx conf */ - if (hw->queues >= IEEE80211_NUM_ACS) { - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN || - sdata->vif.type == NL80211_IFTYPE_MONITOR || - !ieee80211_sdata_running(sdata)) - continue; - - for (i = 0; i < IEEE80211_NUM_ACS; i++) - drv_conf_tx(local, sdata, i, - &sdata->tx_conf[i]); - } - } - /* reconfigure hardware */ ieee80211_hw_config(local, ~0); @@ -1889,6 +1896,22 @@ int ieee80211_reconfig(struct ieee80211_local *local) if (!ieee80211_sdata_running(sdata)) continue; + ieee80211_assign_chanctx(local, sdata); + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MONITOR: + break; + default: + ieee80211_reconfig_stations(sdata); + /* fall through */ + case NL80211_IFTYPE_AP: /* AP stations are handled later */ + for (i = 0; i < IEEE80211_NUM_ACS; i++) + drv_conf_tx(local, sdata, i, + &sdata->tx_conf[i]); + break; + } + /* common change flags for all interface types */ changed = BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE | @@ -2074,17 +2097,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) mb(); local->resuming = false; - /* It's possible that we don't handle the scan completion in - * time during suspend, so if it's still marked as completed - * here, queue the work and flush it to clean things up. - * Instead of calling the worker function directly here, we - * really queue it to avoid potential races with other flows - * scheduling the same work. - */ - if (test_bit(SCAN_COMPLETED, &local->scanning)) { - ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0); - flush_delayed_work(&local->scan_work); - } + ieee80211_flush_completed_scan(local, false); if (local->open_count && !reconfig_due_to_wowlan) drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_SUSPEND); diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index ff1c798921a6..c38b2f07a919 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -378,7 +378,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band, bool nss_only) + enum ieee80211_band band) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -401,9 +401,6 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } - if (nss_only) - return changed; - switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; @@ -430,13 +427,12 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band, bool nss_only) + enum ieee80211_band band) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; - u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, - band, nss_only); + u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band); if (changed > 0) rate_control_rate_update(local, sband, sta, changed); diff --git a/net/rfkill/core.c b/net/rfkill/core.c index b41e9ea2ffff..f53bf3b6558b 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -49,7 +49,6 @@ struct rfkill { spinlock_t lock; - const char *name; enum rfkill_type type; unsigned long state; @@ -73,6 +72,7 @@ struct rfkill { struct delayed_work poll_work; struct work_struct uevent_work; struct work_struct sync_work; + char name[]; }; #define to_rfkill(d) container_of(d, struct rfkill, dev) @@ -876,14 +876,14 @@ struct rfkill * __must_check rfkill_alloc(const char *name, if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES)) return NULL; - rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL); + rfkill = kzalloc(sizeof(*rfkill) + strlen(name) + 1, GFP_KERNEL); if (!rfkill) return NULL; spin_lock_init(&rfkill->lock); INIT_LIST_HEAD(&rfkill->node); rfkill->type = type; - rfkill->name = name; + strcpy(rfkill->name, name); rfkill->ops = ops; rfkill->data = ops_data; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c71e274c810a..75b0d23ee882 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -7941,8 +7941,10 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) if (nla_get_flag(info->attrs[NL80211_ATTR_USE_RRM])) { if (!(rdev->wiphy.features & NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES) || - !(rdev->wiphy.features & NL80211_FEATURE_QUIET)) + !(rdev->wiphy.features & NL80211_FEATURE_QUIET)) { + kzfree(connkeys); return -EINVAL; + } connect.flags |= ASSOC_REQ_USE_RRM; } @@ -9503,6 +9505,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) if (new_triggers.tcp && new_triggers.tcp->sock) sock_release(new_triggers.tcp->sock); kfree(new_triggers.tcp); + kfree(new_triggers.nd_config); return err; } #endif diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2e8d6f39ed56..06d050da0d94 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -3029,6 +3029,7 @@ int set_regdom(const struct ieee80211_regdomain *rd, break; default: WARN(1, "invalid initiator %d\n", lr->initiator); + kfree(rd); return -EINVAL; } @@ -3221,8 +3222,10 @@ int __init regulatory_init(void) /* We always try to get an update for the static regdomain */ err = regulatory_hint_core(cfg80211_world_regdom->alpha2); if (err) { - if (err == -ENOMEM) + if (err == -ENOMEM) { + platform_device_unregister(reg_pdev); return err; + } /* * N.B. kobject_uevent_env() can fail mainly for when we're out * memory which is handled and propagated appropriately above |