diff options
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/armada-370-netgear-rn104.dts | 193 |
2 files changed, 194 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f2b1c33efbfc..55fade67a629 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ + armada-370-netgear-rn104.dtb \ armada-370-rd.dtb \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts new file mode 100644 index 000000000000..b0b32f5fbeb4 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -0,0 +1,193 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 104 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "armada-370.dtsi" + +/ { + model = "NETGEAR ReadyNAS 104"; + compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to Marvell 88SE9215 SATA controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + pinctrl { + poweroff: poweroff { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; + + backup_key_pin: backup-key-pin { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + power_key_pin: power-key-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; + + reset_key_pin: reset-key-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&backup_led_pin &power_led_pin>; + pinctrl-names = "default"; + + blue_backup_led { + label = "rn104:blue:backup"; + gpios = <&gpio1 31 0>; /* GPIO 63 Active High */ + default-state = "off"; + }; + + blue_power_led { + label = "rn104:blue:pwr"; + gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */ + linux,default-trigger = "keep"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&backup_key_pin + &power_key_pin + &reset_key_pin>; + pinctrl-names = "default"; + + button@1 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 20 1>; + }; + + button@2 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 30 0>; + }; + + button@3 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio2 1 1>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio1 28 1>; + }; +}; |