diff options
-rw-r--r-- | arch/powerpc/boot/dts/mvme2500.dts | 280 | ||||
-rw-r--r-- | arch/powerpc/configs/mpc85xx_defconfig | 16 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 6 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/mvme2500.c | 74 |
5 files changed, 374 insertions, 3 deletions
diff --git a/arch/powerpc/boot/dts/mvme2500.dts b/arch/powerpc/boot/dts/mvme2500.dts new file mode 100644 index 000000000000..67714cf0f745 --- /dev/null +++ b/arch/powerpc/boot/dts/mvme2500.dts @@ -0,0 +1,280 @@ +/* + * Device tree source for the Emerson/Artesyn MVME2500 + * + * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "MVME2500"; + compatible = "artesyn,MVME2500"; + + aliases { + serial2 = &serial2; + serial3 = &serial3; + serial4 = &serial4; + serial5 = &serial5; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + + i2c@3000 { + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <8 1 0 0>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + }; + + spi0: spi@7000 { + fsl,espi-num-chipselects = <2>; + + flash@0 { + compatible = "atmel,at25df641"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + flash@1 { + compatible = "atmel,at25df641"; + reg = <1>; + spi-max-frequency = <10000000>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy1: ethernet-phy@1 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + compatible = "brcm,bcm54616S"; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + + phy7: ethernet-phy@7 { + compatible = "brcm,bcm54616S"; + interrupts = <7 1 0 0>; + reg = <0x7>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy7>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfff00000 0x00080000 + 0x1 0x0 0x0 0xffc40000 0x00010000 + 0x2 0x0 0x0 0xffc50000 0x00010000 + 0x3 0x0 0x0 0xffc60000 0x00010000 + 0x4 0x0 0x0 0xffc70000 0x00010000 + 0x6 0x0 0x0 0xffc80000 0x00010000 + 0x5 0x0 0x0 0xffdf0000 0x00008000>; + + serial2: serial@1,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x1 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <11 2 0 0>; + }; + + serial3: serial@2,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x2 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <1 2 0 0>; + }; + + serial4: serial@3,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x3 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <2 2 0 0>; + }; + + serial5: serial@4,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <3 2 0 0>; + }; + + mram@0,0 { + compatible = "everspin,mram", "mtd-ram"; + reg = <0x0 0x0 0x80000>; + bank-width = <2>; + }; + + board-control@5,0 { + compatible = "artesyn,mvme2500-fpga"; + reg = <0x5 0x0 0x01000>; + }; + + cpld@6,0 { + compatible = "artesyn,mvme2500-cpld"; + reg = <0x6 0x0 0x10000>; + interrupts = <9 1 0 0>; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" + +/ { + soc@ffe00000 { + serial@4600 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + non-removable; + }; + + }; + +}; diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index cfae862d6347..8535c343dd57 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -42,6 +42,7 @@ CONFIG_TQM8548=y CONFIG_TQM8555=y CONFIG_TQM8560=y CONFIG_SBC8548=y +CONFIG_MVME2500=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y @@ -49,6 +50,8 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIEASPM is not set CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_NET=y @@ -85,10 +88,14 @@ CONFIG_FTL=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y @@ -120,6 +127,7 @@ CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y +CONFIG_BROADCOM_PHY=y CONFIG_FIXED_PHY=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set @@ -128,8 +136,8 @@ CONFIG_INPUT_FF_MEMLESS=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -142,7 +150,8 @@ CONFIG_SPI=y CONFIG_SPI_FSL_SPI=y CONFIG_SPI_FSL_ESPI=y CONFIG_GPIO_MPC8XXX=y -# CONFIG_HWMON is not set +CONFIG_HWMON=m +CONFIG_SENSORS_LM90=m CONFIG_FB=y CONFIG_FB_FSL_DIU=y # CONFIG_VGA_CONSOLE is not set @@ -185,6 +194,7 @@ CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index f22635a71d01..2fb4b24368a6 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -241,6 +241,12 @@ config SGY_CTS1000 help Enable this to support functionality in Servergy's CTS-1000 systems. +config MVME2500 + bool "Artesyn MVME2500" + select DEFAULT_UIMAGE + help + This option enables support for the Emerson/Artesyn MVME2500 board. + endif # PPC32 config PPC_QEMU_E500 diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 730326046625..1fe7fb95175a 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -31,3 +31,4 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o +obj-$(CONFIG_MVME2500) += mvme2500.o diff --git a/arch/powerpc/platforms/85xx/mvme2500.c b/arch/powerpc/platforms/85xx/mvme2500.c new file mode 100644 index 000000000000..1233050560ae --- /dev/null +++ b/arch/powerpc/platforms/85xx/mvme2500.c @@ -0,0 +1,74 @@ +/* + * Board setup routines for the Emerson/Artesyn MVME2500 + * + * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A. + * + * Based on earlier code by: + * + * Xianghua Xiao (x.xiao@freescale.com) + * Tom Armistead (tom.armistead@emerson.com) + * Copyright 2012 Emerson + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author Alessio Igor Bogani <alessio.bogani@elettra.eu> + * + */ + +#include <linux/pci.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc85xx.h" + +void __init mvme2500_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init mvme2500_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mvme2500_setup_arch()", 0); + fsl_pci_assign_primary(); + pr_info("MVME2500 board from Artesyn\n"); +} + +machine_arch_initcall(mvme2500, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme2500_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "artesyn,MVME2500"); +} + +define_machine(mvme2500) { + .name = "MVME2500", + .probe = mvme2500_probe, + .setup_arch = mvme2500_setup_arch, + .init_IRQ = mvme2500_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; |