diff options
-rw-r--r-- | arch/arm/configs/imx_v4_v5_defconfig | 3 | ||||
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 50 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/eukrea-baseboards.h | 10 | ||||
-rw-r--r-- | arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 351 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-cpuimx27.c | 321 |
6 files changed, 1 insertions, 736 deletions
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 63bde0efc041..f53074cc6a55 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -31,9 +31,6 @@ CONFIG_MACH_EUKREA_CPUIMX25SD=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y -CONFIG_MACH_CPUIMX27=y -CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y -CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index be9a51afe05a..e9a04590f729 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -253,56 +253,6 @@ config MACH_PCM970_BASEBOARD endchoice -config MACH_CPUIMX27 - bool "Eukrea CPUIMX27 module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for Eukrea CPUIMX27 platform. This includes - specific configurations for the module and its peripherals. - -config MACH_EUKREA_CPUIMX27_USESDHC2 - bool "CPUIMX27 integrates SDHC2 module" - depends on MACH_CPUIMX27 - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds support for the internal SDHC2 used on CPUIMX27 - for wifi or eMMC. - -config MACH_EUKREA_CPUIMX27_USEUART4 - bool "CPUIMX27 integrates UART4 module" - depends on MACH_CPUIMX27 - help - This adds support for the internal UART4 used on CPUIMX27 - for bluetooth. - -choice - prompt "Baseboard" - depends on MACH_CPUIMX27 - default MACH_EUKREA_MBIMX27_BASEBOARD - -config MACH_EUKREA_MBIMX27_BASEBOARD - bool "Eukrea MBIMX27 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX27 evaluation board. - -endchoice - config MACH_MX27_3DS bool "MX27PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 23c02932bf84..30f3f5e9792a 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -60,8 +60,6 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o -obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o -obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h index a21d3313f994..bb2c90d65914 100644 --- a/arch/arm/mach-imx/eukrea-baseboards.h +++ b/arch/arm/mach-imx/eukrea-baseboards.h @@ -27,23 +27,15 @@ * This CPU module needs a baseboard to work. After basic initializing * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() - * eukrea_cpuimx35_init() eukrea_cpuimx51_init() - * or eukrea_cpuimx51sd_init(). + * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init() * * This example here is for the development board. Refer * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 - * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 - * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 - * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd */ extern void eukrea_mbimxsd25_baseboard_init(void); -extern void eukrea_mbimx27_baseboard_init(void); extern void eukrea_mbimxsd35_baseboard_init(void); -extern void eukrea_mbimx51_baseboard_init(void); -extern void eukrea_mbimxsd51_baseboard_init(void); #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c deleted file mode 100644 index b2f08bfbbdd3..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/backlight.h> -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int eukrea_mbimx27_pins[] __initconst = { - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* UART4 */ -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* SPI1 */ - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI4 */ -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD | GPIO_PUEN, - PC18_PF_SSI4_TXD | GPIO_PUEN, - PC19_PF_SSI4_CLK, -#endif -}; - -static const uint32_t eukrea_mbimx27_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), -}; - -static const struct matrix_keymap_data -eukrea_mbimx27_keymap_data __initconst = { - .keymap = eukrea_mbimx27_keymap, - .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), -}; - -static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_PORTF | 16, - }, - { - .name = "led2", - .default_trigger = "none", - .active_low = 1, - .gpio = GPIO_PORTF | 19, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimx27_gpio_led_info __initconst = { - .leds = eukrea_mbimx27_gpio_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), -}; - -static struct imx_fb_videomode eukrea_mbimx27_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = 156000, - .hsync_len = 30, - .left_margin = 38, - .right_margin = 20, - .vsync_len = 3, - .upper_margin = 15, - .lower_margin = 4, - }, - .pcr = 0xFAD08B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = { - .mode = eukrea_mbimx27_modes, - .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimx27_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_PORTE | 5, 1); - else - gpio_direction_output(GPIO_PORTE | 5, 0); -} - -static struct generic_bl_info eukrea_mbimx27_bl_info = { - .name = "eukrea_mbimx27-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimx27_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimx27_bl_info, - }, -}; - -static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_PORTA | 25, 1); - else - gpio_direction_output(GPIO_PORTA | 25, 0); -} - -static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { - .set_power = eukrea_mbimx27_lcd_power_set, -}; - -static struct platform_device eukrea_mbimx27_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimx27_lcd_power_data, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define ADS7846_PENDOWN (GPIO_PORTD | 25) - -static void __maybe_unused ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - return; - } - gpio_direction_input(ADS7846_PENDOWN); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info __maybe_unused - eukrea_mbimx27_spi_board_info[] __initdata = { - [0] = { - .modalias = "ads7846", - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 1500000, - /* irq number is run-time assigned */ - .platform_data = &ads7846_config, - .mode = SPI_MODE_2, - }, -}; - -static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; - -static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { - .chipselect = eukrea_mbimx27_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), -}; - -static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .dat3_card_detect = 1, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { - .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, -}; - -/* - * system init for baseboard usage. Will be called by cpuimx27 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimx27_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, - ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); - - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - imx27_add_imx_uart3(&uart_pdata); -#endif - - imx27_add_imx_fb(&eukrea_mbimx27_fb_data); - imx27_add_mxc_mmc(0, &sdhc_pdata); - - i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, - ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - - imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ - || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /* ADS7846 Touchscreen controller init */ - mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); - ads7846_dev_init(); -#endif - - /* SPI_CS0 init */ - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); - eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); - spi_register_board_info(eukrea_mbimx27_spi_board_info, - ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); - - /* Leds configuration */ - mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT); - /* Backlight */ - mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTE | 5, "backlight"); - platform_device_register(&eukrea_mbimx27_bl_dev); - /* LCD Reset */ - mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTA | 25, "lcd_enable"); - platform_device_register(&eukrea_mbimx27_lcd_powerdev); - - imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - - gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c deleted file mode 100644 index e6d4b9929571..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * Based on pcm038.c which is : - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int eukrea_cpuimx27_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART4 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* SDHC2 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -#endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - /* Quad UART's IRQ */ - GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN, -#endif - /* OTG */ - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PC9_PF_USBOTG_DATA0, - PC10_PF_USBOTG_DATA2, - PC11_PF_USBOTG_DATA1, - PC12_PF_USBOTG_DATA4, - PC13_PF_USBOTG_DATA3, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PE2_PF_USBOTG_DIR, - PE24_PF_USBOTG_CLK, - PE25_PF_USBOTG_DATA7, - /* USBH2 */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -static struct physmap_flash_data eukrea_cpuimx27_flash_data = { - .width = 2, -}; - -static struct resource eukrea_cpuimx27_flash_resource = { - .start = 0xc0000000, - .end = 0xc3ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device eukrea_cpuimx27_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &eukrea_cpuimx27_flash_data, - }, - .num_resources = 1, - .resource = &eukrea_cpuimx27_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -cpuimx27_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_cpuimx27_nor_mtd_device, -}; - -static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - } -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; -#endif - -static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = eukrea_cpuimx27_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = eukrea_cpuimx27_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx27_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx27_otg_mode); - -static void __init eukrea_cpuimx27_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, - ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); - - imx27_add_imx_uart0(&uart_pdata); - - imx27_add_mxc_nand(&cpuimx27_nand_board_info); - - i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - - imx27_add_imx_i2c(0, &cpuimx27_i2c1_data); - - imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); - -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - /* SDHC2 can be used for Wifi */ - imx27_add_mxc_mmc(1, NULL); -#endif -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - /* in which case UART4 is also used for Bluetooth */ - imx27_add_imx_uart3(&uart_pdata); -#endif - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); - serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); - serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); - serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); - platform_device_register(&serial_device); -#endif - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx27_add_mxc_ehci_otg(&otg_pdata); - } else { - imx27_add_fsl_usb2_udc(&otg_device_pdata); - } - - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD - eukrea_mbimx27_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx27_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = eukrea_cpuimx27_timer_init, - .init_machine = eukrea_cpuimx27_init, - .restart = mxc_restart, -MACHINE_END |