diff options
79 files changed, 836 insertions, 1920 deletions
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index a406286f6f3e..d111e3b23db0 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -1,7 +1,5 @@ 00-INDEX - This file -barrier.txt - - I/O Barriers biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt @@ -16,3 +14,5 @@ stat.txt - Block layer statistics in /sys/block/<dev>/stat switching-sched.txt - Switching I/O schedulers at runtime +writeback_cache_control.txt + - Control of volatile write back caches diff --git a/Documentation/block/barrier.txt b/Documentation/block/barrier.txt deleted file mode 100644 index 2c2f24f634e4..000000000000 --- a/Documentation/block/barrier.txt +++ /dev/null @@ -1,261 +0,0 @@ -I/O Barriers -============ -Tejun Heo <htejun@gmail.com>, July 22 2005 - -I/O barrier requests are used to guarantee ordering around the barrier -requests. Unless you're crazy enough to use disk drives for -implementing synchronization constructs (wow, sounds interesting...), -the ordering is meaningful only for write requests for things like -journal checkpoints. All requests queued before a barrier request -must be finished (made it to the physical medium) before the barrier -request is started, and all requests queued after the barrier request -must be started only after the barrier request is finished (again, -made it to the physical medium). - -In other words, I/O barrier requests have the following two properties. - -1. Request ordering - -Requests cannot pass the barrier request. Preceding requests are -processed before the barrier and following requests after. - -Depending on what features a drive supports, this can be done in one -of the following three ways. - -i. For devices which have queue depth greater than 1 (TCQ devices) and -support ordered tags, block layer can just issue the barrier as an -ordered request and the lower level driver, controller and drive -itself are responsible for making sure that the ordering constraint is -met. Most modern SCSI controllers/drives should support this. - -NOTE: SCSI ordered tag isn't currently used due to limitation in the - SCSI midlayer, see the following random notes section. - -ii. For devices which have queue depth greater than 1 but don't -support ordered tags, block layer ensures that the requests preceding -a barrier request finishes before issuing the barrier request. Also, -it defers requests following the barrier until the barrier request is -finished. Older SCSI controllers/drives and SATA drives fall in this -category. - -iii. Devices which have queue depth of 1. This is a degenerate case -of ii. Just keeping issue order suffices. Ancient SCSI -controllers/drives and IDE drives are in this category. - -2. Forced flushing to physical medium - -Again, if you're not gonna do synchronization with disk drives (dang, -it sounds even more appealing now!), the reason you use I/O barriers -is mainly to protect filesystem integrity when power failure or some -other events abruptly stop the drive from operating and possibly make -the drive lose data in its cache. So, I/O barriers need to guarantee -that requests actually get written to non-volatile medium in order. - -There are four cases, - -i. No write-back cache. Keeping requests ordered is enough. - -ii. Write-back cache but no flush operation. There's no way to -guarantee physical-medium commit order. This kind of devices can't to -I/O barriers. - -iii. Write-back cache and flush operation but no FUA (forced unit -access). We need two cache flushes - before and after the barrier -request. - -iv. Write-back cache, flush operation and FUA. We still need one -flush to make sure requests preceding a barrier are written to medium, -but post-barrier flush can be avoided by using FUA write on the -barrier itself. - - -How to support barrier requests in drivers ------------------------------------------- - -All barrier handling is done inside block layer proper. All low level -drivers have to are implementing its prepare_flush_fn and using one -the following two functions to indicate what barrier type it supports -and how to prepare flush requests. Note that the term 'ordered' is -used to indicate the whole sequence of performing barrier requests -including draining and flushing. - -typedef void (prepare_flush_fn)(struct request_queue *q, struct request *rq); - -int blk_queue_ordered(struct request_queue *q, unsigned ordered, - prepare_flush_fn *prepare_flush_fn); - -@q : the queue in question -@ordered : the ordered mode the driver/device supports -@prepare_flush_fn : this function should prepare @rq such that it - flushes cache to physical medium when executed - -For example, SCSI disk driver's prepare_flush_fn looks like the -following. - -static void sd_prepare_flush(struct request_queue *q, struct request *rq) -{ - memset(rq->cmd, 0, sizeof(rq->cmd)); - rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->timeout = SD_TIMEOUT; - rq->cmd[0] = SYNCHRONIZE_CACHE; - rq->cmd_len = 10; -} - -The following seven ordered modes are supported. The following table -shows which mode should be used depending on what features a -device/driver supports. In the leftmost column of table, -QUEUE_ORDERED_ prefix is omitted from the mode names to save space. - -The table is followed by description of each mode. Note that in the -descriptions of QUEUE_ORDERED_DRAIN*, '=>' is used whereas '->' is -used for QUEUE_ORDERED_TAG* descriptions. '=>' indicates that the -preceding step must be complete before proceeding to the next step. -'->' indicates that the next step can start as soon as the previous -step is issued. - - write-back cache ordered tag flush FUA ------------------------------------------------------------------------ -NONE yes/no N/A no N/A -DRAIN no no N/A N/A -DRAIN_FLUSH yes no yes no -DRAIN_FUA yes no yes yes -TAG no yes N/A N/A -TAG_FLUSH yes yes yes no -TAG_FUA yes yes yes yes - - -QUEUE_ORDERED_NONE - I/O barriers are not needed and/or supported. - - Sequence: N/A - -QUEUE_ORDERED_DRAIN - Requests are ordered by draining the request queue and cache - flushing isn't needed. - - Sequence: drain => barrier - -QUEUE_ORDERED_DRAIN_FLUSH - Requests are ordered by draining the request queue and both - pre-barrier and post-barrier cache flushings are needed. - - Sequence: drain => preflush => barrier => postflush - -QUEUE_ORDERED_DRAIN_FUA - Requests are ordered by draining the request queue and - pre-barrier cache flushing is needed. By using FUA on barrier - request, post-barrier flushing can be skipped. - - Sequence: drain => preflush => barrier - -QUEUE_ORDERED_TAG - Requests are ordered by ordered tag and cache flushing isn't - needed. - - Sequence: barrier - -QUEUE_ORDERED_TAG_FLUSH - Requests are ordered by ordered tag and both pre-barrier and - post-barrier cache flushings are needed. - - Sequence: preflush -> barrier -> postflush - -QUEUE_ORDERED_TAG_FUA - Requests are ordered by ordered tag and pre-barrier cache - flushing is needed. By using FUA on barrier request, - post-barrier flushing can be skipped. - - Sequence: preflush -> barrier - - -Random notes/caveats --------------------- - -* SCSI layer currently can't use TAG ordering even if the drive, -controller and driver support it. The problem is that SCSI midlayer -request dispatch function is not atomic. It releases queue lock and -switch to SCSI host lock during issue and it's possible and likely to -happen in time that requests change their relative positions. Once -this problem is solved, TAG ordering can be enabled. - -* Currently, no matter which ordered mode is used, there can be only -one barrier request in progress. All I/O barriers are held off by -block layer until the previous I/O barrier is complete. This doesn't -make any difference for DRAIN ordered devices, but, for TAG ordered -devices with very high command latency, passing multiple I/O barriers -to low level *might* be helpful if they are very frequent. Well, this -certainly is a non-issue. I'm writing this just to make clear that no -two I/O barrier is ever passed to low-level driver. - -* Completion order. Requests in ordered sequence are issued in order -but not required to finish in order. Barrier implementation can -handle out-of-order completion of ordered sequence. IOW, the requests -MUST be processed in order but the hardware/software completion paths -are allowed to reorder completion notifications - eg. current SCSI -midlayer doesn't preserve completion order during error handling. - -* Requeueing order. Low-level drivers are free to requeue any request -after they removed it from the request queue with -blkdev_dequeue_request(). As barrier sequence should be kept in order -when requeued, generic elevator code takes care of putting requests in -order around barrier. See blk_ordered_req_seq() and -ELEVATOR_INSERT_REQUEUE handling in __elv_add_request() for details. - -Note that block drivers must not requeue preceding requests while -completing latter requests in an ordered sequence. Currently, no -error checking is done against this. - -* Error handling. Currently, block layer will report error to upper -layer if any of requests in an ordered sequence fails. Unfortunately, -this doesn't seem to be enough. Look at the following request flow. -QUEUE_ORDERED_TAG_FLUSH is in use. - - [0] [1] [2] [3] [pre] [barrier] [post] < [4] [5] [6] ... > - still in elevator - -Let's say request [2], [3] are write requests to update file system -metadata (journal or whatever) and [barrier] is used to mark that -those updates are valid. Consider the following sequence. - - i. Requests [0] ~ [post] leaves the request queue and enters - low-level driver. - ii. After a while, unfortunately, something goes wrong and the - drive fails [2]. Note that any of [0], [1] and [3] could have - completed by this time, but [pre] couldn't have been finished - as the drive must process it in order and it failed before - processing that command. - iii. Error handling kicks in and determines that the error is - unrecoverable and fails [2], and resumes operation. - iv. [pre] [barrier] [post] gets processed. - v. *BOOM* power fails - -The problem here is that the barrier request is *supposed* to indicate -that filesystem update requests [2] and [3] made it safely to the -physical medium and, if the machine crashes after the barrier is -written, filesystem recovery code can depend on that. Sadly, that -isn't true in this case anymore. IOW, the success of a I/O barrier -should also be dependent on success of some of the preceding requests, -where only upper layer (filesystem) knows what 'some' is. - -This can be solved by implementing a way to tell the block layer which -requests affect the success of the following barrier request and -making lower lever drivers to resume operation on error only after -block layer tells it to do so. - -As the probability of this happening is very low and the drive should -be faulty, implementing the fix is probably an overkill. But, still, -it's there. - -* In previous drafts of barrier implementation, there was fallback -mechanism such that, if FUA or ordered TAG fails, less fancy ordered -mode can be selected and the failed barrier request is retried -automatically. The rationale for this feature was that as FUA is -pretty new in ATA world and ordered tag was never used widely, there -could be devices which report to support those features but choke when -actually given such requests. - - This was removed for two reasons 1. it's an overkill 2. it's -impossible to implement properly when TAG ordering is used as low -level drivers resume after an error automatically. If it's ever -needed adding it back and modifying low level drivers accordingly -shouldn't be difficult. diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.txt new file mode 100644 index 000000000000..83407d36630a --- /dev/null +++ b/Documentation/block/writeback_cache_control.txt @@ -0,0 +1,86 @@ + +Explicit volatile write back cache control +===================================== + +Introduction +------------ + +Many storage devices, especially in the consumer market, come with volatile +write back caches. That means the devices signal I/O completion to the +operating system before data actually has hit the non-volatile storage. This +behavior obviously speeds up various workloads, but it means the operating +system needs to force data out to the non-volatile storage when it performs +a data integrity operation like fsync, sync or an unmount. + +The Linux block layer provides two simple mechanisms that let filesystems +control the caching behavior of the storage device. These mechanisms are +a forced cache flush, and the Force Unit Access (FUA) flag for requests. + + +Explicit cache flushes +---------------------- + +The REQ_FLUSH flag can be OR ed into the r/w flags of a bio submitted from +the filesystem and will make sure the volatile cache of the storage device +has been flushed before the actual I/O operation is started. This explicitly +guarantees that previously completed write requests are on non-volatile +storage before the flagged bio starts. In addition the REQ_FLUSH flag can be +set on an otherwise empty bio structure, which causes only an explicit cache +flush without any dependent I/O. It is recommend to use +the blkdev_issue_flush() helper for a pure cache flush. + + +Forced Unit Access +----------------- + +The REQ_FUA flag can be OR ed into the r/w flags of a bio submitted from the +filesystem and will make sure that I/O completion for this request is only +signaled after the data has been committed to non-volatile storage. + + +Implementation details for filesystems +-------------------------------------- + +Filesystems can simply set the REQ_FLUSH and REQ_FUA bits and do not have to +worry if the underlying devices need any explicit cache flushing and how +the Forced Unit Access is implemented. The REQ_FLUSH and REQ_FUA flags +may both be set on a single bio. + + +Implementation details for make_request_fn based block drivers +-------------------------------------------------------------- + +These drivers will always see the REQ_FLUSH and REQ_FUA bits as they sit +directly below the submit_bio interface. For remapping drivers the REQ_FUA +bits need to be propagated to underlying devices, and a global flush needs +to be implemented for bios with the REQ_FLUSH bit set. For real device +drivers that do not have a volatile cache the REQ_FLUSH and REQ_FUA bits +on non-empty bios can simply be ignored, and REQ_FLUSH requests without +data can be completed successfully without doing any work. Drivers for +devices with volatile caches need to implement the support for these +flags themselves without any help from the block layer. + + +Implementation details for request_fn based block drivers +-------------------------------------------------------------- + +For devices that do not support volatile write caches there is no driver +support required, the block layer completes empty REQ_FLUSH requests before +entering the driver and strips off the REQ_FLUSH and REQ_FUA bits from +requests that have a payload. For devices with volatile write caches the +driver needs to tell the block layer that it supports flushing caches by +doing: + + blk_queue_flush(sdkp->disk->queue, REQ_FLUSH); + +and handle empty REQ_FLUSH requests in its prep_fn/request_fn. Note that +REQ_FLUSH requests with a payload are automatically turned into a sequence +of an empty REQ_FLUSH request followed by the actual write by the block +layer. For devices that also support the FUA bit the block layer needs +to be told to pass through the REQ_FUA bit using: + + blk_queue_flush(sdkp->disk->queue, REQ_FLUSH | REQ_FUA); + +and the driver must handle write requests that have the REQ_FUA bit set +in prep_fn/request_fn. If the FUA bit is not natively supported the block +layer turns it into an empty REQ_FLUSH request after the actual write. diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 8a6a8c6d4980..dc73bc54cc4e 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -1640,15 +1640,6 @@ static void blk_request(struct virtqueue *vq) off = out->sector * 512; /* - * The block device implements "barriers", where the Guest indicates - * that it wants all previous writes to occur before this write. We - * don't have a way of asking our kernel to do a barrier, so we just - * synchronize all the data in the file. Pretty poor, no? - */ - if (out->type & VIRTIO_BLK_T_BARRIER) - fdatasync(vblk->fd); - - /* * In general the virtio block driver is allowed to try SCSI commands. * It'd be nice if we supported eject, for example, but we don't. */ @@ -1680,6 +1671,13 @@ static void blk_request(struct virtqueue *vq) /* Die, bad Guest, die. */ errx(1, "Write past end %llu+%u", off, ret); } + + wlen = sizeof(*in); + *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR); + } else if (out->type & VIRTIO_BLK_T_FLUSH) { + /* Flush */ + ret = fdatasync(vblk->fd); + verbose("FLUSH fdatasync: %i\n", ret); wlen = sizeof(*in); *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR); } else { @@ -1703,15 +1701,6 @@ static void blk_request(struct virtqueue *vq) } } - /* - * OK, so we noted that it was pretty poor to use an fdatasync as a - * barrier. But Christoph Hellwig points out that we need a sync - * *afterwards* as well: "Barriers specify no reordering to the front - * or the back." And Jens Axboe confirmed it, so here we are: - */ - if (out->type & VIRTIO_BLK_T_BARRIER) - fdatasync(vblk->fd); - /* Finished that request. */ add_used(vq, head, wlen); } @@ -1736,8 +1725,8 @@ static void setup_block_file(const char *filename) vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE); vblk->len = lseek64(vblk->fd, 0, SEEK_END); - /* We support barriers. */ - add_feature(dev, VIRTIO_BLK_F_BARRIER); + /* We support FLUSH. */ + add_feature(dev, VIRTIO_BLK_F_FLUSH); /* Tell Guest how many sectors this device has. */ conf.capacity = cpu_to_le64(vblk->len / 512); diff --git a/block/Makefile b/block/Makefile index 0bb499a739cd..f627e4b1a9da 100644 --- a/block/Makefile +++ b/block/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \ - blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \ + blk-flush.o blk-settings.o blk-ioc.o blk-map.o \ blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \ blk-iopoll.o blk-lib.o ioctl.o genhd.o scsi_ioctl.o diff --git a/block/blk-barrier.c b/block/blk-barrier.c deleted file mode 100644 index f0faefca032f..000000000000 --- a/block/blk-barrier.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Functions related to barrier IO handling - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/bio.h> -#include <linux/blkdev.h> -#include <linux/gfp.h> - -#include "blk.h" - -/** - * blk_queue_ordered - does this queue support ordered writes - * @q: the request queue - * @ordered: one of QUEUE_ORDERED_* - * - * Description: - * For journalled file systems, doing ordered writes on a commit - * block instead of explicitly doing wait_on_buffer (which is bad - * for performance) can be a big win. Block drivers supporting this - * feature should call this function and indicate so. - * - **/ -int blk_queue_ordered(struct request_queue *q, unsigned ordered) -{ - if (ordered != QUEUE_ORDERED_NONE && - ordered != QUEUE_ORDERED_DRAIN && - ordered != QUEUE_ORDERED_DRAIN_FLUSH && - ordered != QUEUE_ORDERED_DRAIN_FUA && - ordered != QUEUE_ORDERED_TAG && - ordered != QUEUE_ORDERED_TAG_FLUSH && - ordered != QUEUE_ORDERED_TAG_FUA) { - printk(KERN_ERR "blk_queue_ordered: bad value %d\n", ordered); - return -EINVAL; - } - - q->ordered = ordered; - q->next_ordered = ordered; - - return 0; -} -EXPORT_SYMBOL(blk_queue_ordered); - -/* - * Cache flushing for ordered writes handling - */ -unsigned blk_ordered_cur_seq(struct request_queue *q) -{ - if (!q->ordseq) - return 0; - return 1 << ffz(q->ordseq); -} - -unsigned blk_ordered_req_seq(struct request *rq) -{ - struct request_queue *q = rq->q; - - BUG_ON(q->ordseq == 0); - - if (rq == &q->pre_flush_rq) - return QUEUE_ORDSEQ_PREFLUSH; - if (rq == &q->bar_rq) - return QUEUE_ORDSEQ_BAR; - if (rq == &q->post_flush_rq) - return QUEUE_ORDSEQ_POSTFLUSH; - - /* - * !fs requests don't need to follow barrier ordering. Always - * put them at the front. This fixes the following deadlock. - * - * http://thread.gmane.org/gmane.linux.kernel/537473 - */ - if (rq->cmd_type != REQ_TYPE_FS) - return QUEUE_ORDSEQ_DRAIN; - - if ((rq->cmd_flags & REQ_ORDERED_COLOR) == - (q->orig_bar_rq->cmd_flags & REQ_ORDERED_COLOR)) - return QUEUE_ORDSEQ_DRAIN; - else - return QUEUE_ORDSEQ_DONE; -} - -bool blk_ordered_complete_seq(struct request_queue *q, unsigned seq, int error) -{ - struct request *rq; - - if (error && !q->orderr) - q->orderr = error; - - BUG_ON(q->ordseq & seq); - q->ordseq |= seq; - - if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) - return false; - - /* - * Okay, sequence complete. - */ - q->ordseq = 0; - rq = q->orig_bar_rq; - __blk_end_request_all(rq, q->orderr); - return true; -} - -static void pre_flush_end_io(struct request *rq, int error) -{ - elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_PREFLUSH, error); -} - -static void bar_end_io(struct request *rq, int error) -{ - elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_BAR, error); -} - -static void post_flush_end_io(struct request *rq, int error) -{ - elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_POSTFLUSH, error); -} - -static void queue_flush(struct request_queue *q, unsigned which) -{ - struct request *rq; - rq_end_io_fn *end_io; - - if (which == QUEUE_ORDERED_DO_PREFLUSH) { - rq = &q->pre_flush_rq; - end_io = pre_flush_end_io; - } else { - rq = &q->post_flush_rq; - end_io = post_flush_end_io; - } - - blk_rq_init(q, rq); - rq->cmd_type = REQ_TYPE_FS; - rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH; - rq->rq_disk = q->orig_bar_rq->rq_disk; - rq->end_io = end_io; - - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); -} - -static inline bool start_ordered(struct request_queue *q, struct request **rqp) -{ - struct request *rq = *rqp; - unsigned skip = 0; - - q->orderr = 0; - q->ordered = q->next_ordered; - q->ordseq |= QUEUE_ORDSEQ_STARTED; - - /* - * For an empty barrier, there's no actual BAR request, which - * in turn makes POSTFLUSH unnecessary. Mask them off. - */ - if (!blk_rq_sectors(rq)) { - q->ordered &= ~(QUEUE_ORDERED_DO_BAR | - QUEUE_ORDERED_DO_POSTFLUSH); - /* - * Empty barrier on a write-through device w/ ordered - * tag has no command to issue and without any command - * to issue, ordering by tag can't be used. Drain - * instead. - */ - if ((q->ordered & QUEUE_ORDERED_BY_TAG) && - !(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) { - q->ordered &= ~QUEUE_ORDERED_BY_TAG; - q->ordered |= QUEUE_ORDERED_BY_DRAIN; - } - } - - /* stash away the original request */ - blk_dequeue_request(rq); - q->orig_bar_rq = rq; - rq = NULL; - - /* - * Queue ordered sequence. As we stack them at the head, we - * need to queue in reverse order. Note that we rely on that - * no fs request uses ELEVATOR_INSERT_FRONT and thus no fs - * request gets inbetween ordered sequence. - */ - if (q->ordered & QUEUE_ORDERED_DO_POSTFLUSH) { - queue_flush(q, QUEUE_ORDERED_DO_POSTFLUSH); - rq = &q->post_flush_rq; - } else - skip |= QUEUE_ORDSEQ_POSTFLUSH; - - if (q->ordered & QUEUE_ORDERED_DO_BAR) { - rq = &q->bar_rq; - - /* initialize proxy request and queue it */ - blk_rq_init(q, rq); - if (bio_data_dir(q->orig_bar_rq->bio) == WRITE) - rq->cmd_flags |= REQ_WRITE; - if (q->ordered & QUEUE_ORDERED_DO_FUA) - rq->cmd_flags |= REQ_FUA; - init_request_from_bio(rq, q->orig_bar_rq->bio); - rq->end_io = bar_end_io; - - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); - } else - skip |= QUEUE_ORDSEQ_BAR; - - if (q->ordered & QUEUE_ORDERED_DO_PREFLUSH) { - queue_flush(q, QUEUE_ORDERED_DO_PREFLUSH); - rq = &q->pre_flush_rq; - } else - skip |= QUEUE_ORDSEQ_PREFLUSH; - - if ((q->ordered & QUEUE_ORDERED_BY_DRAIN) && queue_in_flight(q)) - rq = NULL; - else - skip |= QUEUE_ORDSEQ_DRAIN; - - *rqp = rq; - - /* - * Complete skipped sequences. If whole sequence is complete, - * return false to tell elevator that this request is gone. - */ - return !blk_ordered_complete_seq(q, skip, 0); -} - -bool blk_do_ordered(struct request_queue *q, struct request **rqp) -{ - struct request *rq = *rqp; - const int is_barrier = rq->cmd_type == REQ_TYPE_FS && - (rq->cmd_flags & REQ_HARDBARRIER); - - if (!q->ordseq) { - if (!is_barrier) - return true; - - if (q->next_ordered != QUEUE_ORDERED_NONE) - return start_ordered(q, rqp); - else { - /* - * Queue ordering not supported. Terminate - * with prejudice. - */ - blk_dequeue_request(rq); - __blk_end_request_all(rq, -EOPNOTSUPP); - *rqp = NULL; - return false; - } - } - - /* - * Ordered sequence in progress - */ - - /* Special requests are not subject to ordering rules. */ - if (rq->cmd_type != REQ_TYPE_FS && - rq != &q->pre_flush_rq && rq != &q->post_flush_rq) - return true; - - if (q->ordered & QUEUE_ORDERED_BY_TAG) { - /* Ordered by tag. Blocking the next barrier is enough. */ - if (is_barrier && rq != &q->bar_rq) - *rqp = NULL; - } else { - /* Ordered by draining. Wait for turn. */ - WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q)); - if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q)) - *rqp = NULL; - } - - return true; -} - -static void bio_end_empty_barrier(struct bio *bio, int err) -{ - if (err) { - if (err == -EOPNOTSUPP) - set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); - clear_bit(BIO_UPTODATE, &bio->bi_flags); - } - if (bio->bi_private) - complete(bio->bi_private); - bio_put(bio); -} - -/** - * blkdev_issue_flush - queue a flush - * @bdev: blockdev to issue flush for - * @gfp_mask: memory allocation flags (for bio_alloc) - * @error_sector: error sector - * @flags: BLKDEV_IFL_* flags to control behaviour - * - * Description: - * Issue a flush for the block device in question. Caller can supply - * room for storing the error offset in case of a flush error, if they - * wish to. If WAIT flag is not passed then caller may check only what - * request was pushed in some internal queue for later handling. - */ -int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, - sector_t *error_sector, unsigned long flags) -{ - DECLARE_COMPLETION_ONSTACK(wait); - struct request_queue *q; - struct bio *bio; - int ret = 0; - - if (bdev->bd_disk == NULL) - return -ENXIO; - - q = bdev_get_queue(bdev); - if (!q) - return -ENXIO; - - /* - * some block devices may not have their queue correctly set up here - * (e.g. loop device without a backing file) and so issuing a flush - * here will panic. Ensure there is a request function before issuing - * the barrier. - */ - if (!q->make_request_fn) - return -ENXIO; - - bio = bio_alloc(gfp_mask, 0); - bio->bi_end_io = bio_end_empty_barrier; - bio->bi_bdev = bdev; - if (test_bit(BLKDEV_WAIT, &flags)) - bio->bi_private = &wait; - - bio_get(bio); - submit_bio(WRITE_BARRIER, bio); - if (test_bit(BLKDEV_WAIT, &flags)) { - wait_for_completion(&wait); - /* - * The driver must store the error location in ->bi_sector, if - * it supports it. For non-stacked drivers, this should be - * copied from blk_rq_pos(rq). - */ - if (error_sector) - *error_sector = bio->bi_sector; - } - - if (bio_flagged(bio, BIO_EOPNOTSUPP)) - ret = -EOPNOTSUPP; - else if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - - bio_put(bio); - return ret; -} -EXPORT_SYMBOL(blkdev_issue_flush); diff --git a/block/blk-core.c b/block/blk-core.c index 32a1c123dfb3..a840523e3b40 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -136,7 +136,7 @@ static void req_bio_endio(struct request *rq, struct bio *bio, { struct request_queue *q = rq->q; - if (&q->bar_rq != rq) { + if (&q->flush_rq != rq) { if (error) clear_bit(BIO_UPTODATE, &bio->bi_flags); else if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) @@ -160,13 +160,12 @@ static void req_bio_endio(struct request *rq, struct bio *bio, if (bio->bi_size == 0) bio_endio(bio, error); } else { - /* - * Okay, this is the barrier request in progress, just - * record the error; + * Okay, this is the sequenced flush request in + * progress, just record the error; */ - if (error && !q->orderr) - q->orderr = error; + if (error && !q->flush_err) + q->flush_err = error; } } @@ -520,6 +519,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) init_timer(&q->unplug_timer); setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q); INIT_LIST_HEAD(&q->timeout_list); + INIT_LIST_HEAD(&q->pending_flushes); INIT_WORK(&q->unplug_work, blk_unplug_work); kobject_init(&q->kobj, &blk_queue_ktype); @@ -1037,22 +1037,6 @@ void blk_insert_request(struct request_queue *q, struct request *rq, } EXPORT_SYMBOL(blk_insert_request); -/* - * add-request adds a request to the linked list. - * queue lock is held and interrupts disabled, as we muck with the - * request queue list. - */ -static inline void add_request(struct request_queue *q, struct request *req) -{ - drive_stat_acct(req, 1); - - /* - * elevator indicated where it wants this request to be - * inserted at elevator_merge time - */ - __elv_add_request(q, req, ELEVATOR_INSERT_SORT, 0); -} - static void part_round_stats_single(int cpu, struct hd_struct *part, unsigned long now) { @@ -1201,13 +1185,16 @@ static int __make_request(struct request_queue *q, struct bio *bio) const bool sync = !!(bio->bi_rw & REQ_SYNC); const bool unplug = !!(bio->bi_rw & REQ_UNPLUG); const unsigned long ff = bio->bi_rw & REQ_FAILFAST_MASK; + int where = ELEVATOR_INSERT_SORT; int rw_flags; - if ((bio->bi_rw & REQ_HARDBARRIER) && - (q->next_ordered == QUEUE_ORDERED_NONE)) { + /* REQ_HARDBARRIER is no more */ + if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER, + "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) { bio_endio(bio, -EOPNOTSUPP); return 0; } + /* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even @@ -1217,7 +1204,12 @@ static int __make_request(struct request_queue *q, struct bio *bio) spin_lock_irq(q->queue_lock); - if (unlikely((bio->bi_rw & REQ_HARDBARRIER)) || elv_queue_empty(q)) + if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) { + where = ELEVATOR_INSERT_FRONT; + goto get_rq; + } + + if (elv_queue_empty(q)) goto get_rq; el_ret = elv_merge(q, &req, bio); @@ -1314,7 +1306,10 @@ get_rq: req->cpu = blk_cpu_to_group(smp_processor_id()); if (queue_should_plug(q) && elv_queue_empty(q)) blk_plug_device(q); - add_request(q, req); + + /* insert the request into the elevator */ + drive_stat_acct(req, 1); + __elv_add_request(q, req, where, 0); out: if (unplug || !queue_should_plug(q)) __generic_unplug_device(q); @@ -1514,6 +1509,19 @@ static inline void __generic_make_request(struct bio *bio) if (bio_check_eod(bio, nr_sectors)) goto end_io; + /* + * Filter flush bio's early so that make_request based + * drivers without flush support don't have to worry + * about them. + */ + if ((bio->bi_rw & (REQ_FLUSH | REQ_FUA)) && !q->flush_flags) { + bio->bi_rw &= ~(REQ_FLUSH | REQ_FUA); + if (!nr_sectors) { + err = 0; + goto end_io; + } + } + if ((bio->bi_rw & REQ_DISCARD) && (!blk_queue_discard(q) || ((bio->bi_rw & REQ_SECURE) && @@ -1768,11 +1776,11 @@ static void blk_account_io_completion(struct request *req, unsigned int bytes) static void blk_account_io_done(struct request *req) { /* - * Account IO completion. bar_rq isn't accounted as a normal - * IO on queueing nor completion. Accounting the containing - * request is enough. + * Account IO completion. flush_rq isn't accounted as a + * normal IO on queueing nor completion. Accounting the + * containing request is enough. */ - if (blk_do_io_stat(req) && req != &req->q->bar_rq) { + if (blk_do_io_stat(req) && req != &req->q->flush_rq) { unsigned long duration = jiffies - req->start_time; const int rw = rq_data_dir(req); struct hd_struct *part; @@ -2497,9 +2505,7 @@ EXPORT_SYMBOL_GPL(blk_rq_unprep_clone); static void __blk_rq_prep_clone(struct request *dst, struct request *src) { dst->cpu = src->cpu; - dst->cmd_flags = (rq_data_dir(src) | REQ_NOMERGE); - if (src->cmd_flags & REQ_DISCARD) - dst->cmd_flags |= REQ_DISCARD; + dst->cmd_flags = (src->cmd_flags & REQ_CLONE_MASK) | REQ_NOMERGE; dst->cmd_type = src->cmd_type; dst->__sector = blk_rq_pos(src); dst->__data_len = blk_rq_bytes(src); diff --git a/block/blk-flush.c b/block/blk-flush.c new file mode 100644 index 000000000000..54b123d6563e --- /dev/null +++ b/block/blk-flush.c @@ -0,0 +1,262 @@ +/* + * Functions to sequence FLUSH and FUA writes. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/bio.h> +#include <linux/blkdev.h> +#include <linux/gfp.h> + +#include "blk.h" + +/* FLUSH/FUA sequences */ +enum { + QUEUE_FSEQ_STARTED = (1 << 0), /* flushing in progress */ + QUEUE_FSEQ_PREFLUSH = (1 << 1), /* pre-flushing in progress */ + QUEUE_FSEQ_DATA = (1 << 2), /* data write in progress */ + QUEUE_FSEQ_POSTFLUSH = (1 << 3), /* post-flushing in progress */ + QUEUE_FSEQ_DONE = (1 << 4), +}; + +static struct request *queue_next_fseq(struct request_queue *q); + +unsigned blk_flush_cur_seq(struct request_queue *q) +{ + if (!q->flush_seq) + return 0; + return 1 << ffz(q->flush_seq); +} + +static struct request *blk_flush_complete_seq(struct request_queue *q, + unsigned seq, int error) +{ + struct request *next_rq = NULL; + + if (error && !q->flush_err) + q->flush_err = error; + + BUG_ON(q->flush_seq & seq); + q->flush_seq |= seq; + + if (blk_flush_cur_seq(q) != QUEUE_FSEQ_DONE) { + /* not complete yet, queue the next flush sequence */ + next_rq = queue_next_fseq(q); + } else { + /* complete this flush request */ + __blk_end_request_all(q->orig_flush_rq, q->flush_err); + q->orig_flush_rq = NULL; + q->flush_seq = 0; + + /* dispatch the next flush if there's one */ + if (!list_empty(&q->pending_flushes)) { + next_rq = list_entry_rq(q->pending_flushes.next); + list_move(&next_rq->queuelist, &q->queue_head); + } + } + return next_rq; +} + +static void blk_flush_complete_seq_end_io(struct request_queue *q, + unsigned seq, int error) +{ + bool was_empty = elv_queue_empty(q); + struct request *next_rq; + + next_rq = blk_flush_complete_seq(q, seq, error); + + /* + * Moving a request silently to empty queue_head may stall the + * queue. Kick the queue in those cases. + */ + if (was_empty && next_rq) + __blk_run_queue(q); +} + +static void pre_flush_end_io(struct request *rq, int error) +{ + elv_completed_request(rq->q, rq); + blk_flush_complete_seq_end_io(rq->q, QUEUE_FSEQ_PREFLUSH, error); +} + +static void flush_data_end_io(struct request *rq, int error) +{ + elv_completed_request(rq->q, rq); + blk_flush_complete_seq_end_io(rq->q, QUEUE_FSEQ_DATA, error); +} + +static void post_flush_end_io(struct request *rq, int error) +{ + elv_completed_request(rq->q, rq); + blk_flush_complete_seq_end_io(rq->q, QUEUE_FSEQ_POSTFLUSH, error); +} + +static void init_flush_request(struct request *rq, struct gendisk *disk) +{ + rq->cmd_type = REQ_TYPE_FS; + rq->cmd_flags = WRITE_FLUSH; + rq->rq_disk = disk; +} + +static struct request *queue_next_fseq(struct request_queue *q) +{ + struct request *orig_rq = q->orig_flush_rq; + struct request *rq = &q->flush_rq; + + blk_rq_init(q, rq); + + switch (blk_flush_cur_seq(q)) { + case QUEUE_FSEQ_PREFLUSH: + init_flush_request(rq, orig_rq->rq_disk); + rq->end_io = pre_flush_end_io; + break; + case QUEUE_FSEQ_DATA: + init_request_from_bio(rq, orig_rq->bio); + /* + * orig_rq->rq_disk may be different from + * bio->bi_bdev->bd_disk if orig_rq got here through + * remapping drivers. Make sure rq->rq_disk points + * to the same one as orig_rq. + */ + rq->rq_disk = orig_rq->rq_disk; + rq->cmd_flags &= ~(REQ_FLUSH | REQ_FUA); + rq->cmd_flags |= orig_rq->cmd_flags & (REQ_FLUSH | REQ_FUA); + rq->end_io = flush_data_end_io; + break; + case QUEUE_FSEQ_POSTFLUSH: + init_flush_request(rq, orig_rq->rq_disk); + rq->end_io = post_flush_end_io; + break; + default: + BUG(); + } + + elv_insert(q, rq, ELEVATOR_INSERT_FRONT); + return rq; +} + +struct request *blk_do_flush(struct request_queue *q, struct request *rq) +{ + unsigned int fflags = q->flush_flags; /* may change, cache it */ + bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA; + bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH); + bool do_postflush = has_flush && !has_fua && (rq->cmd_flags & REQ_FUA); + unsigned skip = 0; + + /* + * Special case. If there's data but flush is not necessary, + * the request can be issued directly. + * + * Flush w/o data should be able to be issued directly too but + * currently some drivers assume that rq->bio contains + * non-zero data if it isn't NULL and empty FLUSH requests + * getting here usually have bio's without data. + */ + if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) { + rq->cmd_flags &= ~REQ_FLUSH; + if (!has_fua) + rq->cmd_flags &= ~REQ_FUA; + return rq; + } + + /* + * Sequenced flushes can't be processed in parallel. If + * another one is already in progress, queue for later + * processing. + */ + if (q->flush_seq) { + list_move_tail(&rq->queuelist, &q->pending_flushes); + return NULL; + } + + /* + * Start a new flush sequence + */ + q->flush_err = 0; + q->flush_seq |= QUEUE_FSEQ_STARTED; + + /* adjust FLUSH/FUA of the original request and stash it away */ + rq->cmd_flags &= ~REQ_FLUSH; + if (!has_fua) + rq->cmd_flags &= ~REQ_FUA; + blk_dequeue_request(rq); + q->orig_flush_rq = rq; + + /* skip unneded sequences and return the first one */ + if (!do_preflush) + skip |= QUEUE_FSEQ_PREFLUSH; + if (!blk_rq_sectors(rq)) + skip |= QUEUE_FSEQ_DATA; + if (!do_postflush) + skip |= QUEUE_FSEQ_POSTFLUSH; + return blk_flush_complete_seq(q, skip, 0); +} + +static void bio_end_flush(struct bio *bio, int err) +{ + if (err) + clear_bit(BIO_UPTODATE, &bio->bi_flags); + if (bio->bi_private) + complete(bio->bi_private); + bio_put(bio); +} + +/** + * blkdev_issue_flush - queue a flush + * @bdev: blockdev to issue flush for + * @gfp_mask: memory allocation flags (for bio_alloc) + * @error_sector: error sector + * + * Description: + * Issue a flush for the block device in question. Caller can supply + * room for storing the error offset in case of a flush error, if they + * wish to. If WAIT flag is not passed then caller may check only what + * request was pushed in some internal queue for later handling. + */ +int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, + sector_t *error_sector) +{ + DECLARE_COMPLETION_ONSTACK(wait); + struct request_queue *q; + struct bio *bio; + int ret = 0; + + if (bdev->bd_disk == NULL) + return -ENXIO; + + q = bdev_get_queue(bdev); + if (!q) + return -ENXIO; + + /* + * some block devices may not have their queue correctly set up here + * (e.g. loop device without a backing file) and so issuing a flush + * here will panic. Ensure there is a request function before issuing + * the flush. + */ + if (!q->make_request_fn) + return -ENXIO; + + bio = bio_alloc(gfp_mask, 0); + bio->bi_end_io = bio_end_flush; + bio->bi_bdev = bdev; + bio->bi_private = &wait; + + bio_get(bio); + submit_bio(WRITE_FLUSH, bio); + wait_for_completion(&wait); + + /* + * The driver must store the error location in ->bi_sector, if + * it supports it. For non-stacked drivers, this should be + * copied from blk_rq_pos(rq). + */ + if (error_sector) + *error_sector = bio->bi_sector; + + if (!bio_flagged(bio, BIO_UPTODATE)) + ret = -EIO; + + bio_put(bio); + return ret; +} +EXPORT_SYMBOL(blkdev_issue_flush); diff --git a/block/blk-lib.c b/block/blk-lib.c index c392029a104e..1a320d2406b0 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -39,8 +39,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, { DECLARE_COMPLETION_ONSTACK(wait); struct request_queue *q = bdev_get_queue(bdev); - int type = flags & BLKDEV_IFL_BARRIER ? - DISCARD_BARRIER : DISCARD_NOBARRIER; + int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; struct bio *bio; int ret = 0; @@ -62,10 +61,10 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, max_discard_sectors &= ~(disc_sects - 1); } - if (flags & BLKDEV_IFL_SECURE) { + if (flags & BLKDEV_DISCARD_SECURE) { if (!blk_queue_secdiscard(q)) return -EOPNOTSUPP; - type |= DISCARD_SECURE; + type |= REQ_SECURE; } while (nr_sects && !ret) { @@ -78,8 +77,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bio->bi_sector = sector; bio->bi_end_io = blkdev_discard_end_io; bio->bi_bdev = bdev; - if (flags & BLKDEV_IFL_WAIT) - bio->bi_private = &wait; + bio->bi_private = &wait; if (nr_sects > max_discard_sectors) { bio->bi_size = max_discard_sectors << 9; @@ -93,8 +91,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bio_get(bio); submit_bio(type, bio); - if (flags & BLKDEV_IFL_WAIT) - wait_for_completion(&wait); + wait_for_completion(&wait); if (bio_flagged(bio, BIO_EOPNOTSUPP)) ret = -EOPNOTSUPP; @@ -140,7 +137,6 @@ static void bio_batch_end_io(struct bio *bio, int err) * @sector: start sector * @nr_sects: number of sectors to write * @gfp_mask: memory allocation flags (for bio_alloc) - * @flags: BLKDEV_IFL_* flags to control behaviour * * Description: * Generate and issue number of bios with zerofiled pages. @@ -149,7 +145,7 @@ static void bio_batch_end_io(struct bio *bio, int err) */ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, - sector_t nr_sects, gfp_t gfp_mask, unsigned long flags) + sector_t nr_sects, gfp_t gfp_mask) { int ret; struct bio *bio; @@ -162,12 +158,6 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, bb.wait = &wait; bb.end_io = NULL; - if (flags & BLKDEV_IFL_BARRIER) { - /* issue async barrier before the data */ - ret = blkdev_issue_flush(bdev, gfp_mask, NULL, 0); - if (ret) - return ret; - } submit: ret = 0; while (nr_sects != 0) { @@ -181,8 +171,7 @@ submit: bio->bi_sector = sector; bio->bi_bdev = bdev; bio->bi_end_io = bio_batch_end_io; - if (flags & BLKDEV_IFL_WAIT) - bio->bi_private = &bb; + bio->bi_private = &bb; while (nr_sects != 0) { sz = min((sector_t) PAGE_SIZE >> 9 , nr_sects); @@ -199,18 +188,10 @@ submit: issued++; submit_bio(WRITE, bio); } - /* - * When all data bios are in flight. Send final barrier if requeted. - */ - if (nr_sects == 0 && flags & BLKDEV_IFL_BARRIER) - ret = blkdev_issue_flush(bdev, gfp_mask, NULL, - flags & BLKDEV_IFL_WAIT); - - if (flags & BLKDEV_IFL_WAIT) - /* Wait for bios in-flight */ - while ( issued != atomic_read(&bb.done)) - wait_for_completion(&wait); + /* Wait for bios in-flight */ + while (issued != atomic_read(&bb.done)) + wait_for_completion(&wait); if (!test_bit(BIO_UPTODATE, &bb.flags)) /* One of bios in the batch was completed with error.*/ diff --git a/block/blk-settings.c b/block/blk-settings.c index a234f4bf1d6f..9b18afcfe925 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -794,6 +794,26 @@ void blk_queue_update_dma_alignment(struct request_queue *q, int mask) } EXPORT_SYMBOL(blk_queue_update_dma_alignment); +/** + * blk_queue_flush - configure queue's cache flush capability + * @q: the request queue for the device + * @flush: 0, REQ_FLUSH or REQ_FLUSH | REQ_FUA + * + * Tell block layer cache flush capability of @q. If it supports + * flushing, REQ_FLUSH should be set. If it supports bypassing + * write cache for individual writes, REQ_FUA should be set. + */ +void blk_queue_flush(struct request_queue *q, unsigned int flush) +{ + WARN_ON_ONCE(flush & ~(REQ_FLUSH | REQ_FUA)); + + if (WARN_ON_ONCE(!(flush & REQ_FLUSH) && (flush & REQ_FUA))) + flush &= ~REQ_FUA; + + q->flush_flags = flush & (REQ_FLUSH | REQ_FUA); +} +EXPORT_SYMBOL_GPL(blk_queue_flush); + static int __init blk_settings_init(void) { blk_max_low_pfn = max_low_pfn - 1; diff --git a/block/blk.h b/block/blk.h index d6b911ac002c..faf94f2acb12 100644 --- a/block/blk.h +++ b/block/blk.h @@ -51,6 +51,8 @@ static inline void blk_clear_rq_complete(struct request *rq) */ #define ELV_ON_HASH(rq) (!hlist_unhashed(&(rq)->hash)) +struct request *blk_do_flush(struct request_queue *q, struct request *rq); + static inline struct request *__elv_next_request(struct request_queue *q) { struct request *rq; @@ -58,7 +60,11 @@ static inline struct request *__elv_next_request(struct request_queue *q) while (1) { while (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - if (blk_do_ordered(q, &rq)) + if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) || + rq == &q->flush_rq) + return rq; + rq = blk_do_flush(q, rq); + if (rq) return rq; } diff --git a/block/elevator.c b/block/elevator.c index 4e11559aa2b0..282e8308f7e2 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -617,8 +617,6 @@ void elv_quiesce_end(struct request_queue *q) void elv_insert(struct request_queue *q, struct request *rq, int where) { - struct list_head *pos; - unsigned ordseq; int unplug_it = 1; trace_block_rq_insert(q, rq); @@ -626,9 +624,16 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) rq->q = q; switch (where) { + case ELEVATOR_INSERT_REQUEUE: + /* + * Most requeues happen because of a busy condition, + * don't force unplug of the queue for that case. + * Clear unplug_it and fall through. + */ + unplug_it = 0; + case ELEVATOR_INSERT_FRONT: rq->cmd_flags |= REQ_SOFTBARRIER; - list_add(&rq->queuelist, &q->queue_head); break; @@ -668,36 +673,6 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) q->elevator->ops->elevator_add_req_fn(q, rq); break; - case ELEVATOR_INSERT_REQUEUE: - /* - * If ordered flush isn't in progress, we do front - * insertion; otherwise, requests should be requeued - * in ordseq order. - */ - rq->cmd_flags |= REQ_SOFTBARRIER; - - /* - * Most requeues happen because of a busy condition, - * don't force unplug of the queue for that case. - */ - unplug_it = 0; - - if (q->ordseq == 0) { - list_add(&rq->queuelist, &q->queue_head); - break; - } - - ordseq = blk_ordered_req_seq(rq); - - list_for_each(pos, &q->queue_head) { - struct request *pos_rq = list_entry_rq(pos); - if (ordseq <= blk_ordered_req_seq(pos_rq)) - break; - } - - list_add_tail(&rq->queuelist, pos); - break; - default: printk(KERN_ERR "%s: bad insertion point %d\n", __func__, where); @@ -716,26 +691,8 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) void __elv_add_request(struct request_queue *q, struct request *rq, int where, int plug) { - if (q->ordcolor) - rq->cmd_flags |= REQ_ORDERED_COLOR; - if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { - /* - * toggle ordered color - */ - if (rq->cmd_flags & REQ_HARDBARRIER) - q->ordcolor ^= 1; - - /* - * barriers implicitly indicate back insertion - */ - if (where == ELEVATOR_INSERT_SORT) - where = ELEVATOR_INSERT_BACK; - - /* - * this request is scheduling boundary, update - * end_sector - */ + /* barriers are scheduling boundary, update end_sector */ if (rq->cmd_type == REQ_TYPE_FS || (rq->cmd_flags & REQ_DISCARD)) { q->end_sector = rq_end_sector(rq); @@ -855,24 +812,6 @@ void elv_completed_request(struct request_queue *q, struct request *rq) e->ops->elevator_completed_req_fn) e->ops->elevator_completed_req_fn(q, rq); } - - /* - * Check if the queue is waiting for fs requests to be - * drained for flush sequence. - */ - if (unlikely(q->ordseq)) { - struct request *next = NULL; - - if (!list_empty(&q->queue_head)) - next = list_entry_rq(q->queue_head.next); - - if (!queue_in_flight(q) && - blk_ordered_cur_seq(q) == QUEUE_ORDSEQ_DRAIN && - (!next || blk_ordered_req_seq(next) > QUEUE_ORDSEQ_DRAIN)) { - blk_ordered_complete_seq(q, QUEUE_ORDSEQ_DRAIN, 0); - __blk_run_queue(q); - } - } } #define to_elv(atr) container_of((atr), struct elv_fs_entry, attr) diff --git a/block/ioctl.c b/block/ioctl.c index d8052f0dabd3..cb2b9099862b 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -116,7 +116,7 @@ static int blkdev_reread_part(struct block_device *bdev) static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, uint64_t len, int secure) { - unsigned long flags = BLKDEV_IFL_WAIT; + unsigned long flags = 0; if (start & 511) return -EINVAL; @@ -128,7 +128,7 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, if (start + len > (bdev->bd_inode->i_size >> 9)) return -EINVAL; if (secure) - flags |= BLKDEV_IFL_SECURE; + flags |= BLKDEV_DISCARD_SECURE; return blkdev_issue_discard(bdev, start, len, GFP_KERNEL, flags); } diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 1c7f63792ff8..fa33f97722ba 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -482,7 +482,6 @@ static struct brd_device *brd_alloc(int i) if (!brd->brd_queue) goto out_free_dev; blk_queue_make_request(brd->brd_queue, brd_make_request); - blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG); blk_queue_max_hw_sectors(brd->brd_queue, 1024); blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY); diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 352441b0f92f..c2ef476f5711 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -2321,8 +2321,7 @@ static inline void drbd_md_flush(struct drbd_conf *mdev) if (test_bit(MD_NO_BARRIER, &mdev->flags)) return; - r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL); if (r) { set_bit(MD_NO_BARRIER, &mdev->flags); dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r); diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 081522d3c742..df15e7f0e7b7 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -975,7 +975,7 @@ static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct d if (mdev->write_ordering >= WO_bdev_flush && get_ldev(mdev)) { rv = blkdev_issue_flush(mdev->ldev->backing_bdev, GFP_KERNEL, - NULL, BLKDEV_IFL_WAIT); + NULL); if (rv) { dev_err(DEV, "local disk flush failed with status %d\n", rv); /* would rather check on EOPNOTSUPP, but that is not reliable. diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 91797bbbe702..5d27bc6596de 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -477,17 +477,17 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset; if (bio_rw(bio) == WRITE) { - bool barrier = !!(bio->bi_rw & REQ_HARDBARRIER); struct file *file = lo->lo_backing_file; - if (barrier) { - if (unlikely(!file->f_op->fsync)) { - ret = -EOPNOTSUPP; - goto out; - } + /* REQ_HARDBARRIER is deprecated */ + if (bio->bi_rw & REQ_HARDBARRIER) { + ret = -EOPNOTSUPP; + goto out; + } + if (bio->bi_rw & REQ_FLUSH) { ret = vfs_fsync(file, 0); - if (unlikely(ret)) { + if (unlikely(ret && ret != -EINVAL)) { ret = -EIO; goto out; } @@ -495,9 +495,9 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) ret = lo_send(lo, bio, pos); - if (barrier && !ret) { + if ((bio->bi_rw & REQ_FUA) && !ret) { ret = vfs_fsync(file, 0); - if (unlikely(ret)) + if (unlikely(ret && ret != -EINVAL)) ret = -EIO; } } else @@ -832,7 +832,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, lo->lo_queue->unplug_fn = loop_unplug; if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync) - blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN); + blk_queue_flush(lo->lo_queue, REQ_FLUSH); set_capacity(lo->lo_disk, size); bd_set_size(bdev, size << 9); diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c index 2284b4f05c62..87311ebac0db 100644 --- a/drivers/block/osdblk.c +++ b/drivers/block/osdblk.c @@ -310,8 +310,7 @@ static void osdblk_rq_fn(struct request_queue *q) break; /* filter out block requests we don't understand */ - if (rq->cmd_type != REQ_TYPE_FS && - !(rq->cmd_flags & REQ_HARDBARRIER)) { + if (rq->cmd_type != REQ_TYPE_FS) { blk_end_request_all(rq, 0); continue; } @@ -439,7 +438,7 @@ static int osdblk_init_disk(struct osdblk_device *osdev) blk_queue_stack_limits(q, osd_request_queue(osdev->osd)); blk_queue_prep_rq(q, blk_queue_start_tag); - blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(q, REQ_FLUSH); disk->queue = q; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 37a2bb595076..1b5cfcccd654 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -753,7 +753,6 @@ static int pkt_generic_packet(struct pktcdvd_device *pd, struct packet_command * rq->timeout = 60*HZ; rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_HARDBARRIER; if (cgc->quiet) rq->cmd_flags |= REQ_QUIET; diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index e9da874d0419..4911f9e57bc7 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -468,7 +468,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev) blk_queue_dma_alignment(queue, dev->blk_size-1); blk_queue_logical_block_size(queue, dev->blk_size); - blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(queue, REQ_FLUSH); blk_queue_max_segments(queue, -1); blk_queue_max_segment_size(queue, dev->bounce_size); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 1101e251a629..831e75caea3d 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -128,9 +128,6 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, } } - if (vbr->req->cmd_flags & REQ_HARDBARRIER) - vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER; - sg_set_buf(&vblk->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr)); /* @@ -392,31 +389,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) vblk->disk->driverfs_dev = &vdev->dev; index++; - if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) { - /* - * If the FLUSH feature is supported we do have support for - * flushing a volatile write cache on the host. Use that - * to implement write barrier support. - */ - blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH); - } else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) { - /* - * If the BARRIER feature is supported the host expects us - * to order request by tags. This implies there is not - * volatile write cache on the host, and that the host - * never re-orders outstanding I/O. This feature is not - * useful for real life scenarious and deprecated. - */ - blk_queue_ordered(q, QUEUE_ORDERED_TAG); - } else { - /* - * If the FLUSH feature is not supported we must assume that - * the host does not perform any kind of volatile write - * caching. We still need to drain the queue to provider - * proper barrier semantics. - */ - blk_queue_ordered(q, QUEUE_ORDERED_DRAIN); - } + /* configure queue flush support */ + if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) + blk_queue_flush(q, REQ_FLUSH); /* If disk is read-only in the host, the guest should obey */ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) @@ -535,9 +510,9 @@ static const struct virtio_device_id id_table[] = { }; static unsigned int features[] = { - VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, - VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, - VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY + VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, + VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, VIRTIO_BLK_F_SCSI, + VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY }; /* diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index ab735a605cf3..f2ffc46644df 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -95,7 +95,7 @@ struct blkfront_info struct gnttab_free_callback callback; struct blk_shadow shadow[BLK_RING_SIZE]; unsigned long shadow_free; - int feature_barrier; + unsigned int feature_flush; int is_ready; }; @@ -418,26 +418,12 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) } -static int xlvbd_barrier(struct blkfront_info *info) +static void xlvbd_flush(struct blkfront_info *info) { - int err; - const char *barrier; - - switch (info->feature_barrier) { - case QUEUE_ORDERED_DRAIN: barrier = "enabled (drain)"; break; - case QUEUE_ORDERED_TAG: barrier = "enabled (tag)"; break; - case QUEUE_ORDERED_NONE: barrier = "disabled"; break; - default: return -EINVAL; - } - - err = blk_queue_ordered(info->rq, info->feature_barrier); - - if (err) - return err; - + blk_queue_flush(info->rq, info->feature_flush); printk(KERN_INFO "blkfront: %s: barriers %s\n", - info->gd->disk_name, barrier); - return 0; + info->gd->disk_name, + info->feature_flush ? "enabled" : "disabled"); } @@ -516,7 +502,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity, info->rq = gd->queue; info->gd = gd; - xlvbd_barrier(info); + xlvbd_flush(info); if (vdisk_info & VDISK_READONLY) set_disk_ro(gd, 1); @@ -662,8 +648,8 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) printk(KERN_WARNING "blkfront: %s: write barrier op failed\n", info->gd->disk_name); error = -EOPNOTSUPP; - info->feature_barrier = QUEUE_ORDERED_NONE; - xlvbd_barrier(info); + info->feature_flush = 0; + xlvbd_flush(info); } /* fall through */ case BLKIF_OP_READ: @@ -1076,20 +1062,13 @@ static void blkfront_connect(struct blkfront_info *info) /* * If there's no "feature-barrier" defined, then it means * we're dealing with a very old backend which writes - * synchronously; draining will do what needs to get done. + * synchronously; nothing to do. * - * If there are barriers, then we can do full queued writes - * with tagged barriers. - * - * If barriers are not supported, then there's no much we can - * do, so just set ordering to NONE. + * If there are barriers, then we use flush. */ - if (err) - info->feature_barrier = QUEUE_ORDERED_DRAIN; - else if (barrier) - info->feature_barrier = QUEUE_ORDERED_TAG; - else - info->feature_barrier = QUEUE_ORDERED_NONE; + info->feature_flush = 0; + if (!err && barrier) + info->feature_flush = REQ_FLUSH; err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size); if (err) { diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7433e07de30e..7c5b01ce51d2 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -516,10 +516,10 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) return ide_no_data_taskfile(drive, &cmd); } -static void update_ordered(ide_drive_t *drive) +static void update_flush(ide_drive_t *drive) { u16 *id = drive->id; - unsigned ordered = QUEUE_ORDERED_NONE; + unsigned flush = 0; if (drive->dev_flags & IDE_DFLAG_WCACHE) { unsigned long long capacity; @@ -543,13 +543,12 @@ static void update_ordered(ide_drive_t *drive) drive->name, barrier ? "" : "not "); if (barrier) { - ordered = QUEUE_ORDERED_DRAIN_FLUSH; + flush = REQ_FLUSH; blk_queue_prep_rq(drive->queue, idedisk_prep_fn); } - } else - ordered = QUEUE_ORDERED_DRAIN; + } - blk_queue_ordered(drive->queue, ordered); + blk_queue_flush(drive->queue, flush); } ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); @@ -572,7 +571,7 @@ static int set_wcache(ide_drive_t *drive, int arg) } } - update_ordered(drive); + update_flush(drive); return err; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a381be814070..999dac054bcc 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -441,19 +441,6 @@ void do_ide_request(struct request_queue *q) struct request *rq = NULL; ide_startstop_t startstop; - /* - * drive is doing pre-flush, ordered write, post-flush sequence. even - * though that is 3 requests, it must be seen as a single transaction. - * we must not preempt this drive until that is complete - */ - if (blk_queue_flushing(q)) - /* - * small race where queue could get replugged during - * the 3-request flush cycle, just yank the plug since - * we want it to finish asap - */ - blk_remove_plug(q); - spin_unlock_irq(q->queue_lock); /* HLD do_request() callback might sleep, make sure it's okay */ diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 368e8e98f705..d5b0e4c0e702 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1278,7 +1278,7 @@ static int crypt_map(struct dm_target *ti, struct bio *bio, struct dm_crypt_io *io; struct crypt_config *cc; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { cc = ti->private; bio->bi_bdev = cc->dev->bdev; return DM_MAPIO_REMAPPED; diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 0590c75b0ab6..136d4f71a116 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -31,7 +31,6 @@ struct dm_io_client { */ struct io { unsigned long error_bits; - unsigned long eopnotsupp_bits; atomic_t count; struct task_struct *sleeper; struct dm_io_client *client; @@ -130,11 +129,8 @@ static void retrieve_io_and_region_from_bio(struct bio *bio, struct io **io, *---------------------------------------------------------------*/ static void dec_count(struct io *io, unsigned int region, int error) { - if (error) { + if (error) set_bit(region, &io->error_bits); - if (error == -EOPNOTSUPP) - set_bit(region, &io->eopnotsupp_bits); - } if (atomic_dec_and_test(&io->count)) { if (io->sleeper) @@ -310,8 +306,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, sector_t remaining = where->count; /* - * where->count may be zero if rw holds a write barrier and we - * need to send a zero-sized barrier. + * where->count may be zero if rw holds a flush and we need to + * send a zero-sized flush. */ do { /* @@ -364,7 +360,7 @@ static void dispatch_io(int rw, unsigned int num_regions, */ for (i = 0; i < num_regions; i++) { *dp = old_pages; - if (where[i].count || (rw & REQ_HARDBARRIER)) + if (where[i].count || (rw & REQ_FLUSH)) do_region(rw, i, where + i, dp, io); } @@ -393,9 +389,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, return -EIO; } -retry: io->error_bits = 0; - io->eopnotsupp_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ io->sleeper = current; io->client = client; @@ -412,11 +406,6 @@ retry: } set_current_state(TASK_RUNNING); - if (io->eopnotsupp_bits && (rw & REQ_HARDBARRIER)) { - rw &= ~REQ_HARDBARRIER; - goto retry; - } - if (error_bits) *error_bits = io->error_bits; @@ -437,7 +426,6 @@ static int async_io(struct dm_io_client *client, unsigned int num_regions, io = mempool_alloc(client->pool, GFP_NOIO); io->error_bits = 0; - io->eopnotsupp_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ io->sleeper = NULL; io->client = client; diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 5a08be0222db..33420e68d153 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -300,7 +300,7 @@ static int flush_header(struct log_c *lc) .count = 0, }; - lc->io_req.bi_rw = WRITE_BARRIER; + lc->io_req.bi_rw = WRITE_FLUSH; return dm_io(&lc->io_req, 1, &null_location, NULL); } diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 7c081bcbc3cf..19a59b041c27 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -259,7 +259,7 @@ static int mirror_flush(struct dm_target *ti) struct dm_io_region io[ms->nr_mirrors]; struct mirror *m; struct dm_io_request io_req = { - .bi_rw = WRITE_BARRIER, + .bi_rw = WRITE_FLUSH, .mem.type = DM_IO_KMEM, .mem.ptr.bvec = NULL, .client = ms->io_client, @@ -629,7 +629,7 @@ static void do_write(struct mirror_set *ms, struct bio *bio) struct dm_io_region io[ms->nr_mirrors], *dest = io; struct mirror *m; struct dm_io_request io_req = { - .bi_rw = WRITE | (bio->bi_rw & WRITE_BARRIER), + .bi_rw = WRITE | (bio->bi_rw & WRITE_FLUSH_FUA), .mem.type = DM_IO_BVEC, .mem.ptr.bvec = bio->bi_io_vec + bio->bi_idx, .notify.fn = write_callback, @@ -670,7 +670,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) bio_list_init(&requeue); while ((bio = bio_list_pop(writes))) { - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { bio_list_add(&sync, bio); continue; } @@ -1203,7 +1203,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, * We need to dec pending if this was a write. */ if (rw == WRITE) { - if (likely(!bio_empty_barrier(bio))) + if (!(bio->bi_rw & REQ_FLUSH)) dm_rh_dec(ms->rh, map_context->ll); return error; } diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index bd5c58b28868..dad011aed0c9 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -81,9 +81,9 @@ struct dm_region_hash { struct list_head failed_recovered_regions; /* - * If there was a barrier failure no regions can be marked clean. + * If there was a flush failure no regions can be marked clean. */ - int barrier_failure; + int flush_failure; void *context; sector_t target_begin; @@ -217,7 +217,7 @@ struct dm_region_hash *dm_region_hash_create( INIT_LIST_HEAD(&rh->quiesced_regions); INIT_LIST_HEAD(&rh->recovered_regions); INIT_LIST_HEAD(&rh->failed_recovered_regions); - rh->barrier_failure = 0; + rh->flush_failure = 0; rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS, sizeof(struct dm_region)); @@ -399,8 +399,8 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio) region_t region = dm_rh_bio_to_region(rh, bio); int recovering = 0; - if (bio_empty_barrier(bio)) { - rh->barrier_failure = 1; + if (bio->bi_rw & REQ_FLUSH) { + rh->flush_failure = 1; return; } @@ -524,7 +524,7 @@ void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios) struct bio *bio; for (bio = bios->head; bio; bio = bio->bi_next) { - if (bio_empty_barrier(bio)) + if (bio->bi_rw & REQ_FLUSH) continue; rh_inc(rh, dm_rh_bio_to_region(rh, bio)); } @@ -555,9 +555,9 @@ void dm_rh_dec(struct dm_region_hash *rh, region_t region) */ /* do nothing for DM_RH_NOSYNC */ - if (unlikely(rh->barrier_failure)) { + if (unlikely(rh->flush_failure)) { /* - * If a write barrier failed some time ago, we + * If a write flush failed some time ago, we * don't know whether or not this write made it * to the disk, so we must resync the device. */ diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index cc2bdb83f9ad..0b61792a2780 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -687,7 +687,7 @@ static void persistent_commit_exception(struct dm_exception_store *store, /* * Commit exceptions to disk. */ - if (ps->valid && area_io(ps, WRITE_BARRIER)) + if (ps->valid && area_io(ps, WRITE_FLUSH_FUA)) ps->valid = 0; /* diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 5974d3094d97..eed210152b75 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -1587,7 +1587,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio, chunk_t chunk; struct dm_snap_pending_exception *pe = NULL; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { bio->bi_bdev = s->cow->bdev; return DM_MAPIO_REMAPPED; } @@ -1691,7 +1691,7 @@ static int snapshot_merge_map(struct dm_target *ti, struct bio *bio, int r = DM_MAPIO_REMAPPED; chunk_t chunk; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { if (!map_context->target_request_nr) bio->bi_bdev = s->origin->bdev; else @@ -2135,7 +2135,7 @@ static int origin_map(struct dm_target *ti, struct bio *bio, struct dm_dev *dev = ti->private; bio->bi_bdev = dev->bdev; - if (unlikely(bio_empty_barrier(bio))) + if (bio->bi_rw & REQ_FLUSH) return DM_MAPIO_REMAPPED; /* Only tell snapshots if this is a write */ diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index c297f6da91ea..f0371b4c4fbf 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -271,7 +271,7 @@ static int stripe_map(struct dm_target *ti, struct bio *bio, uint32_t stripe; unsigned target_request_nr; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { target_request_nr = map_context->target_request_nr; BUG_ON(target_request_nr >= sc->stripes); bio->bi_bdev = sc->stripe[target_request_nr].dev->bdev; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index ac384b2a6a33..f934e9878436 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -110,7 +110,6 @@ EXPORT_SYMBOL_GPL(dm_get_rq_mapinfo); #define DMF_FREEING 3 #define DMF_DELETING 4 #define DMF_NOFLUSH_SUSPENDING 5 -#define DMF_QUEUE_IO_TO_THREAD 6 /* * Work processed by per-device workqueue. @@ -144,24 +143,9 @@ struct mapped_device { spinlock_t deferred_lock; /* - * An error from the barrier request currently being processed. - */ - int barrier_error; - - /* - * Protect barrier_error from concurrent endio processing - * in request-based dm. - */ - spinlock_t barrier_error_lock; - - /* - * Processing queue (flush/barriers) + * Processing queue (flush) */ struct workqueue_struct *wq; - struct work_struct barrier_work; - - /* A pointer to the currently processing pre/post flush request */ - struct request *flush_request; /* * The current mapping. @@ -200,8 +184,8 @@ struct mapped_device { /* sysfs handle */ struct kobject kobj; - /* zero-length barrier that will be cloned and submitted to targets */ - struct bio barrier_bio; + /* zero-length flush that will be cloned and submitted to targets */ + struct bio flush_bio; }; /* @@ -512,7 +496,7 @@ static void end_io_acct(struct dm_io *io) /* * After this is decremented the bio must not be touched if it is - * a barrier. + * a flush. */ dm_disk(md)->part0.in_flight[rw] = pending = atomic_dec_return(&md->pending[rw]); @@ -528,16 +512,12 @@ static void end_io_acct(struct dm_io *io) */ static void queue_io(struct mapped_device *md, struct bio *bio) { - down_write(&md->io_lock); + unsigned long flags; - spin_lock_irq(&md->deferred_lock); + spin_lock_irqsave(&md->deferred_lock, flags); bio_list_add(&md->deferred, bio); - spin_unlock_irq(&md->deferred_lock); - - if (!test_and_set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) - queue_work(md->wq, &md->work); - - up_write(&md->io_lock); + spin_unlock_irqrestore(&md->deferred_lock, flags); + queue_work(md->wq, &md->work); } /* @@ -625,11 +605,9 @@ static void dec_pending(struct dm_io *io, int error) * Target requested pushing back the I/O. */ spin_lock_irqsave(&md->deferred_lock, flags); - if (__noflush_suspending(md)) { - if (!(io->bio->bi_rw & REQ_HARDBARRIER)) - bio_list_add_head(&md->deferred, - io->bio); - } else + if (__noflush_suspending(md)) + bio_list_add_head(&md->deferred, io->bio); + else /* noflush suspend was interrupted. */ io->error = -EIO; spin_unlock_irqrestore(&md->deferred_lock, flags); @@ -637,32 +615,23 @@ static void dec_pending(struct dm_io *io, int error) io_error = io->error; bio = io->bio; + end_io_acct(io); + free_io(md, io); + + if (io_error == DM_ENDIO_REQUEUE) + return; - if (bio->bi_rw & REQ_HARDBARRIER) { + if ((bio->bi_rw & REQ_FLUSH) && bio->bi_size) { /* - * There can be just one barrier request so we use - * a per-device variable for error reporting. - * Note that you can't touch the bio after end_io_acct - * - * We ignore -EOPNOTSUPP for empty flush reported by - * underlying devices. We assume that if the device - * doesn't support empty barriers, it doesn't need - * cache flushing commands. + * Preflush done for flush with data, reissue + * without REQ_FLUSH. */ - if (!md->barrier_error && - !(bio_empty_barrier(bio) && io_error == -EOPNOTSUPP)) - md->barrier_error = io_error; - end_io_acct(io); - free_io(md, io); + bio->bi_rw &= ~REQ_FLUSH; + queue_io(md, bio); } else { - end_io_acct(io); - free_io(md, io); - - if (io_error != DM_ENDIO_REQUEUE) { - trace_block_bio_complete(md->queue, bio); - - bio_endio(bio, io_error); - } + /* done with normal IO or empty flush */ + trace_block_bio_complete(md->queue, bio); + bio_endio(bio, io_error); } } } @@ -755,23 +724,6 @@ static void end_clone_bio(struct bio *clone, int error) blk_update_request(tio->orig, 0, nr_bytes); } -static void store_barrier_error(struct mapped_device *md, int error) -{ - unsigned long flags; - - spin_lock_irqsave(&md->barrier_error_lock, flags); - /* - * Basically, the first error is taken, but: - * -EOPNOTSUPP supersedes any I/O error. - * Requeue request supersedes any I/O error but -EOPNOTSUPP. - */ - if (!md->barrier_error || error == -EOPNOTSUPP || - (md->barrier_error != -EOPNOTSUPP && - error == DM_ENDIO_REQUEUE)) - md->barrier_error = error; - spin_unlock_irqrestore(&md->barrier_error_lock, flags); -} - /* * Don't touch any member of the md after calling this function because * the md may be freed in dm_put() at the end of this function. @@ -809,13 +761,11 @@ static void free_rq_clone(struct request *clone) static void dm_end_request(struct request *clone, int error) { int rw = rq_data_dir(clone); - int run_queue = 1; - bool is_barrier = clone->cmd_flags & REQ_HARDBARRIER; struct dm_rq_target_io *tio = clone->end_io_data; struct mapped_device *md = tio->md; struct request *rq = tio->orig; - if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !is_barrier) { + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { rq->errors = clone->errors; rq->resid_len = clone->resid_len; @@ -829,15 +779,8 @@ static void dm_end_request(struct request *clone, int error) } free_rq_clone(clone); - - if (unlikely(is_barrier)) { - if (unlikely(error)) - store_barrier_error(md, error); - run_queue = 0; - } else - blk_end_request_all(rq, error); - - rq_completed(md, rw, run_queue); + blk_end_request_all(rq, error); + rq_completed(md, rw, true); } static void dm_unprep_request(struct request *rq) @@ -862,16 +805,6 @@ void dm_requeue_unmapped_request(struct request *clone) struct request_queue *q = rq->q; unsigned long flags; - if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) { - /* - * Barrier clones share an original request. - * Leave it to dm_end_request(), which handles this special - * case. - */ - dm_end_request(clone, DM_ENDIO_REQUEUE); - return; - } - dm_unprep_request(rq); spin_lock_irqsave(q->queue_lock, flags); @@ -961,19 +894,6 @@ static void dm_complete_request(struct request *clone, int error) struct dm_rq_target_io *tio = clone->end_io_data; struct request *rq = tio->orig; - if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) { - /* - * Barrier clones share an original request. So can't use - * softirq_done with the original. - * Pass the clone to dm_done() directly in this special case. - * It is safe (even if clone->q->queue_lock is held here) - * because there is no I/O dispatching during the completion - * of barrier clone. - */ - dm_done(clone, error, true); - return; - } - tio->error = error; rq->completion_data = clone; blk_complete_request(rq); @@ -990,17 +910,6 @@ void dm_kill_unmapped_request(struct request *clone, int error) struct dm_rq_target_io *tio = clone->end_io_data; struct request *rq = tio->orig; - if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) { - /* - * Barrier clones share an original request. - * Leave it to dm_end_request(), which handles this special - * case. - */ - BUG_ON(error > 0); - dm_end_request(clone, error); - return; - } - rq->cmd_flags |= REQ_FAILED; dm_complete_request(clone, error); } @@ -1119,7 +1028,7 @@ static void dm_bio_destructor(struct bio *bio) } /* - * Creates a little bio that is just does part of a bvec. + * Creates a little bio that just does part of a bvec. */ static struct bio *split_bvec(struct bio *bio, sector_t sector, unsigned short idx, unsigned int offset, @@ -1134,7 +1043,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_sector = sector; clone->bi_bdev = bio->bi_bdev; - clone->bi_rw = bio->bi_rw & ~REQ_HARDBARRIER; + clone->bi_rw = bio->bi_rw; clone->bi_vcnt = 1; clone->bi_size = to_bytes(len); clone->bi_io_vec->bv_offset = offset; @@ -1161,7 +1070,6 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs); __bio_clone(clone, bio); - clone->bi_rw &= ~REQ_HARDBARRIER; clone->bi_destructor = dm_bio_destructor; clone->bi_sector = sector; clone->bi_idx = idx; @@ -1225,16 +1133,15 @@ static void __issue_target_requests(struct clone_info *ci, struct dm_target *ti, __issue_target_request(ci, ti, request_nr, len); } -static int __clone_and_map_empty_barrier(struct clone_info *ci) +static int __clone_and_map_empty_flush(struct clone_info *ci) { unsigned target_nr = 0; struct dm_target *ti; + BUG_ON(bio_has_data(ci->bio)); while ((ti = dm_table_get_target(ci->map, target_nr++))) __issue_target_requests(ci, ti, ti->num_flush_requests, 0); - ci->sector_count = 0; - return 0; } @@ -1289,9 +1196,6 @@ static int __clone_and_map(struct clone_info *ci) sector_t len = 0, max; struct dm_target_io *tio; - if (unlikely(bio_empty_barrier(bio))) - return __clone_and_map_empty_barrier(ci); - if (unlikely(bio->bi_rw & REQ_DISCARD)) return __clone_and_map_discard(ci); @@ -1383,16 +1287,11 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.map = dm_get_live_table(md); if (unlikely(!ci.map)) { - if (!(bio->bi_rw & REQ_HARDBARRIER)) - bio_io_error(bio); - else - if (!md->barrier_error) - md->barrier_error = -EIO; + bio_io_error(bio); return; } ci.md = md; - ci.bio = bio; ci.io = alloc_io(md); ci.io->error = 0; atomic_set(&ci.io->io_count, 1); @@ -1400,14 +1299,20 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.io->md = md; spin_lock_init(&ci.io->endio_lock); ci.sector = bio->bi_sector; - ci.sector_count = bio_sectors(bio); - if (unlikely(bio_empty_barrier(bio))) - ci.sector_count = 1; ci.idx = bio->bi_idx; start_io_acct(ci.io); - while (ci.sector_count && !error) - error = __clone_and_map(&ci); + if (bio->bi_rw & REQ_FLUSH) { + ci.bio = &ci.md->flush_bio; + ci.sector_count = 0; + error = __clone_and_map_empty_flush(&ci); + /* dec_pending submits any data associated with flush */ + } else { + ci.bio = bio; + ci.sector_count = bio_sectors(bio); + while (ci.sector_count && !error) + error = __clone_and_map(&ci); + } /* drop the extra reference count */ dec_pending(ci.io, error); @@ -1491,22 +1396,14 @@ static int _dm_request(struct request_queue *q, struct bio *bio) part_stat_add(cpu, &dm_disk(md)->part0, sectors[rw], bio_sectors(bio)); part_stat_unlock(); - /* - * If we're suspended or the thread is processing barriers - * we have to queue this io for later. - */ - if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) || - unlikely(bio->bi_rw & REQ_HARDBARRIER)) { + /* if we're suspended, we have to queue this io for later */ + if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags))) { up_read(&md->io_lock); - if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) && - bio_rw(bio) == READA) { + if (bio_rw(bio) != READA) + queue_io(md, bio); + else bio_io_error(bio); - return 0; - } - - queue_io(md, bio); - return 0; } @@ -1537,14 +1434,6 @@ static int dm_request(struct request_queue *q, struct bio *bio) return _dm_request(q, bio); } -static bool dm_rq_is_flush_request(struct request *rq) -{ - if (rq->cmd_flags & REQ_FLUSH) - return true; - else - return false; -} - void dm_dispatch_request(struct request *rq) { int r; @@ -1592,22 +1481,15 @@ static int setup_clone(struct request *clone, struct request *rq, { int r; - if (dm_rq_is_flush_request(rq)) { - blk_rq_init(NULL, clone); - clone->cmd_type = REQ_TYPE_FS; - clone->cmd_flags |= (REQ_HARDBARRIER | WRITE); - } else { - r = blk_rq_prep_clone(clone, rq, tio->md->bs, GFP_ATOMIC, - dm_rq_bio_constructor, tio); - if (r) - return r; - - clone->cmd = rq->cmd; - clone->cmd_len = rq->cmd_len; - clone->sense = rq->sense; - clone->buffer = rq->buffer; - } + r = blk_rq_prep_clone(clone, rq, tio->md->bs, GFP_ATOMIC, + dm_rq_bio_constructor, tio); + if (r) + return r; + clone->cmd = rq->cmd; + clone->cmd_len = rq->cmd_len; + clone->sense = rq->sense; + clone->buffer = rq->buffer; clone->end_io = end_clone_request; clone->end_io_data = tio; @@ -1648,9 +1530,6 @@ static int dm_prep_fn(struct request_queue *q, struct request *rq) struct mapped_device *md = q->queuedata; struct request *clone; - if (unlikely(dm_rq_is_flush_request(rq))) - return BLKPREP_OK; - if (unlikely(rq->special)) { DMWARN("Already has something in rq->special."); return BLKPREP_KILL; @@ -1727,6 +1606,7 @@ static void dm_request_fn(struct request_queue *q) struct dm_table *map = dm_get_live_table(md); struct dm_target *ti; struct request *rq, *clone; + sector_t pos; /* * For suspend, check blk_queue_stopped() and increment @@ -1739,15 +1619,14 @@ static void dm_request_fn(struct request_queue *q) if (!rq) goto plug_and_out; - if (unlikely(dm_rq_is_flush_request(rq))) { - BUG_ON(md->flush_request); - md->flush_request = rq; - blk_start_request(rq); - queue_work(md->wq, &md->barrier_work); - goto out; - } + /* always use block 0 to find the target for flushes for now */ + pos = 0; + if (!(rq->cmd_flags & REQ_FLUSH)) + pos = blk_rq_pos(rq); + + ti = dm_table_find_target(map, pos); + BUG_ON(!dm_target_is_valid(ti)); - ti = dm_table_find_target(map, blk_rq_pos(rq)); if (ti->type->busy && ti->type->busy(ti)) goto plug_and_out; @@ -1918,7 +1797,6 @@ out: static const struct block_device_operations dm_blk_dops; static void dm_wq_work(struct work_struct *work); -static void dm_rq_barrier_work(struct work_struct *work); static void dm_init_md_queue(struct mapped_device *md) { @@ -1940,6 +1818,7 @@ static void dm_init_md_queue(struct mapped_device *md) blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY); md->queue->unplug_fn = dm_unplug_all; blk_queue_merge_bvec(md->queue, dm_merge_bvec); + blk_queue_flush(md->queue, REQ_FLUSH | REQ_FUA); } /* @@ -1972,7 +1851,6 @@ static struct mapped_device *alloc_dev(int minor) mutex_init(&md->suspend_lock); mutex_init(&md->type_lock); spin_lock_init(&md->deferred_lock); - spin_lock_init(&md->barrier_error_lock); rwlock_init(&md->map_lock); atomic_set(&md->holders, 1); atomic_set(&md->open_count, 0); @@ -1995,7 +1873,6 @@ static struct mapped_device *alloc_dev(int minor) atomic_set(&md->pending[1], 0); init_waitqueue_head(&md->wait); INIT_WORK(&md->work, dm_wq_work); - INIT_WORK(&md->barrier_work, dm_rq_barrier_work); init_waitqueue_head(&md->eventq); md->disk->major = _major; @@ -2015,6 +1892,10 @@ static struct mapped_device *alloc_dev(int minor) if (!md->bdev) goto bad_bdev; + bio_init(&md->flush_bio); + md->flush_bio.bi_bdev = md->bdev; + md->flush_bio.bi_rw = WRITE_FLUSH; + /* Populate the mapping, nobody knows we exist yet */ spin_lock(&_minor_lock); old_md = idr_replace(&_minor_idr, md, minor); @@ -2245,7 +2126,6 @@ static int dm_init_request_based_queue(struct mapped_device *md) blk_queue_softirq_done(md->queue, dm_softirq_done); blk_queue_prep_rq(md->queue, dm_prep_fn); blk_queue_lld_busy(md->queue, dm_lld_busy); - blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH); elv_register_queue(md->queue); @@ -2406,43 +2286,6 @@ static int dm_wait_for_completion(struct mapped_device *md, int interruptible) return r; } -static void dm_flush(struct mapped_device *md) -{ - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - - bio_init(&md->barrier_bio); - md->barrier_bio.bi_bdev = md->bdev; - md->barrier_bio.bi_rw = WRITE_BARRIER; - __split_and_process_bio(md, &md->barrier_bio); - - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); -} - -static void process_barrier(struct mapped_device *md, struct bio *bio) -{ - md->barrier_error = 0; - - dm_flush(md); - - if (!bio_empty_barrier(bio)) { - __split_and_process_bio(md, bio); - /* - * If the request isn't supported, don't waste time with - * the second flush. - */ - if (md->barrier_error != -EOPNOTSUPP) - dm_flush(md); - } - - if (md->barrier_error != DM_ENDIO_REQUEUE) - bio_endio(bio, md->barrier_error); - else { - spin_lock_irq(&md->deferred_lock); - bio_list_add_head(&md->deferred, bio); - spin_unlock_irq(&md->deferred_lock); - } -} - /* * Process the deferred bios */ @@ -2452,33 +2295,27 @@ static void dm_wq_work(struct work_struct *work) work); struct bio *c; - down_write(&md->io_lock); + down_read(&md->io_lock); while (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) { spin_lock_irq(&md->deferred_lock); c = bio_list_pop(&md->deferred); spin_unlock_irq(&md->deferred_lock); - if (!c) { - clear_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); + if (!c) break; - } - up_write(&md->io_lock); + up_read(&md->io_lock); if (dm_request_based(md)) generic_make_request(c); - else { - if (c->bi_rw & REQ_HARDBARRIER) - process_barrier(md, c); - else - __split_and_process_bio(md, c); - } + else + __split_and_process_bio(md, c); - down_write(&md->io_lock); + down_read(&md->io_lock); } - up_write(&md->io_lock); + up_read(&md->io_lock); } static void dm_queue_flush(struct mapped_device *md) @@ -2488,73 +2325,6 @@ static void dm_queue_flush(struct mapped_device *md) queue_work(md->wq, &md->work); } -static void dm_rq_set_target_request_nr(struct request *clone, unsigned request_nr) -{ - struct dm_rq_target_io *tio = clone->end_io_data; - - tio->info.target_request_nr = request_nr; -} - -/* Issue barrier requests to targets and wait for their completion. */ -static int dm_rq_barrier(struct mapped_device *md) -{ - int i, j; - struct dm_table *map = dm_get_live_table(md); - unsigned num_targets = dm_table_get_num_targets(map); - struct dm_target *ti; - struct request *clone; - - md->barrier_error = 0; - - for (i = 0; i < num_targets; i++) { - ti = dm_table_get_target(map, i); - for (j = 0; j < ti->num_flush_requests; j++) { - clone = clone_rq(md->flush_request, md, GFP_NOIO); - dm_rq_set_target_request_nr(clone, j); - atomic_inc(&md->pending[rq_data_dir(clone)]); - map_request(ti, clone, md); - } - } - - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - dm_table_put(map); - - return md->barrier_error; -} - -static void dm_rq_barrier_work(struct work_struct *work) -{ - int error; - struct mapped_device *md = container_of(work, struct mapped_device, - barrier_work); - struct request_queue *q = md->queue; - struct request *rq; - unsigned long flags; - - /* - * Hold the md reference here and leave it at the last part so that - * the md can't be deleted by device opener when the barrier request - * completes. - */ - dm_get(md); - - error = dm_rq_barrier(md); - - rq = md->flush_request; - md->flush_request = NULL; - - if (error == DM_ENDIO_REQUEUE) { - spin_lock_irqsave(q->queue_lock, flags); - blk_requeue_request(q, rq); - spin_unlock_irqrestore(q->queue_lock, flags); - } else - blk_end_request_all(rq, error); - - blk_run_queue(q); - - dm_put(md); -} - /* * Swap in a new table, returning the old one for the caller to destroy. */ @@ -2677,23 +2447,17 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) * * To get all processes out of __split_and_process_bio in dm_request, * we take the write lock. To prevent any process from reentering - * __split_and_process_bio from dm_request, we set - * DMF_QUEUE_IO_TO_THREAD. - * - * To quiesce the thread (dm_wq_work), we set DMF_BLOCK_IO_FOR_SUSPEND - * and call flush_workqueue(md->wq). flush_workqueue will wait until - * dm_wq_work exits and DMF_BLOCK_IO_FOR_SUSPEND will prevent any - * further calls to __split_and_process_bio from dm_wq_work. + * __split_and_process_bio from dm_request and quiesce the thread + * (dm_wq_work), we set BMF_BLOCK_IO_FOR_SUSPEND and call + * flush_workqueue(md->wq). */ down_write(&md->io_lock); set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); - set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); up_write(&md->io_lock); /* - * Request-based dm uses md->wq for barrier (dm_rq_barrier_work) which - * can be kicked until md->queue is stopped. So stop md->queue before - * flushing md->wq. + * Stop md->queue before flushing md->wq in case request-based + * dm defers requests to md->wq from md->queue. */ if (dm_request_based(md)) stop_queue(md->queue); diff --git a/drivers/md/linear.c b/drivers/md/linear.c index ba19060bcf3f..8a2f767f26d8 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -294,8 +294,8 @@ static int linear_make_request (mddev_t *mddev, struct bio *bio) dev_info_t *tmp_dev; sector_t start_sector; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } diff --git a/drivers/md/md.c b/drivers/md/md.c index f20d13e717d5..ed075d19db37 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -226,12 +226,12 @@ static int md_make_request(struct request_queue *q, struct bio *bio) return 0; } rcu_read_lock(); - if (mddev->suspended || mddev->barrier) { + if (mddev->suspended) { DEFINE_WAIT(__wait); for (;;) { prepare_to_wait(&mddev->sb_wait, &__wait, TASK_UNINTERRUPTIBLE); - if (!mddev->suspended && !mddev->barrier) + if (!mddev->suspended) break; rcu_read_unlock(); schedule(); @@ -282,40 +282,29 @@ EXPORT_SYMBOL_GPL(mddev_resume); int mddev_congested(mddev_t *mddev, int bits) { - if (mddev->barrier) - return 1; return mddev->suspended; } EXPORT_SYMBOL(mddev_congested); /* - * Generic barrier handling for md + * Generic flush handling for md */ -#define POST_REQUEST_BARRIER ((void*)1) - -static void md_end_barrier(struct bio *bio, int err) +static void md_end_flush(struct bio *bio, int err) { mdk_rdev_t *rdev = bio->bi_private; mddev_t *mddev = rdev->mddev; - if (err == -EOPNOTSUPP && mddev->barrier != POST_REQUEST_BARRIER) - set_bit(BIO_EOPNOTSUPP, &mddev->barrier->bi_flags); rdev_dec_pending(rdev, mddev); if (atomic_dec_and_test(&mddev->flush_pending)) { - if (mddev->barrier == POST_REQUEST_BARRIER) { - /* This was a post-request barrier */ - mddev->barrier = NULL; - wake_up(&mddev->sb_wait); - } else - /* The pre-request barrier has finished */ - schedule_work(&mddev->barrier_work); + /* The pre-request flush has finished */ + schedule_work(&mddev->flush_work); } bio_put(bio); } -static void submit_barriers(mddev_t *mddev) +static void submit_flushes(mddev_t *mddev) { mdk_rdev_t *rdev; @@ -332,60 +321,56 @@ static void submit_barriers(mddev_t *mddev) atomic_inc(&rdev->nr_pending); rcu_read_unlock(); bi = bio_alloc(GFP_KERNEL, 0); - bi->bi_end_io = md_end_barrier; + bi->bi_end_io = md_end_flush; bi->bi_private = rdev; bi->bi_bdev = rdev->bdev; atomic_inc(&mddev->flush_pending); - submit_bio(WRITE_BARRIER, bi); + submit_bio(WRITE_FLUSH, bi); rcu_read_lock(); rdev_dec_pending(rdev, mddev); } rcu_read_unlock(); } -static void md_submit_barrier(struct work_struct *ws) +static void md_submit_flush_data(struct work_struct *ws) { - mddev_t *mddev = container_of(ws, mddev_t, barrier_work); - struct bio *bio = mddev->barrier; + mddev_t *mddev = container_of(ws, mddev_t, flush_work); + struct bio *bio = mddev->flush_bio; atomic_set(&mddev->flush_pending, 1); - if (test_bit(BIO_EOPNOTSUPP, &bio->bi_flags)) - bio_endio(bio, -EOPNOTSUPP); - else if (bio->bi_size == 0) + if (bio->bi_size == 0) /* an empty barrier - all done */ bio_endio(bio, 0); else { - bio->bi_rw &= ~REQ_HARDBARRIER; + bio->bi_rw &= ~REQ_FLUSH; if (mddev->pers->make_request(mddev, bio)) generic_make_request(bio); - mddev->barrier = POST_REQUEST_BARRIER; - submit_barriers(mddev); } if (atomic_dec_and_test(&mddev->flush_pending)) { - mddev->barrier = NULL; + mddev->flush_bio = NULL; wake_up(&mddev->sb_wait); } } -void md_barrier_request(mddev_t *mddev, struct bio *bio) +void md_flush_request(mddev_t *mddev, struct bio *bio) { spin_lock_irq(&mddev->write_lock); wait_event_lock_irq(mddev->sb_wait, - !mddev->barrier, + !mddev->flush_bio, mddev->write_lock, /*nothing*/); - mddev->barrier = bio; + mddev->flush_bio = bio; spin_unlock_irq(&mddev->write_lock); atomic_set(&mddev->flush_pending, 1); - INIT_WORK(&mddev->barrier_work, md_submit_barrier); + INIT_WORK(&mddev->flush_work, md_submit_flush_data); - submit_barriers(mddev); + submit_flushes(mddev); if (atomic_dec_and_test(&mddev->flush_pending)) - schedule_work(&mddev->barrier_work); + schedule_work(&mddev->flush_work); } -EXPORT_SYMBOL(md_barrier_request); +EXPORT_SYMBOL(md_flush_request); /* Support for plugging. * This mirrors the plugging support in request_queue, but does not @@ -696,31 +681,6 @@ static void super_written(struct bio *bio, int error) bio_put(bio); } -static void super_written_barrier(struct bio *bio, int error) -{ - struct bio *bio2 = bio->bi_private; - mdk_rdev_t *rdev = bio2->bi_private; - mddev_t *mddev = rdev->mddev; - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags) && - error == -EOPNOTSUPP) { - unsigned long flags; - /* barriers don't appear to be supported :-( */ - set_bit(BarriersNotsupp, &rdev->flags); - mddev->barriers_work = 0; - spin_lock_irqsave(&mddev->write_lock, flags); - bio2->bi_next = mddev->biolist; - mddev->biolist = bio2; - spin_unlock_irqrestore(&mddev->write_lock, flags); - wake_up(&mddev->sb_wait); - bio_put(bio); - } else { - bio_put(bio2); - bio->bi_private = rdev; - super_written(bio, error); - } -} - void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, sector_t sector, int size, struct page *page) { @@ -729,51 +689,28 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, * and decrement it on completion, waking up sb_wait * if zero is reached. * If an error occurred, call md_error - * - * As we might need to resubmit the request if REQ_HARDBARRIER - * causes ENOTSUPP, we allocate a spare bio... */ struct bio *bio = bio_alloc(GFP_NOIO, 1); - int rw = REQ_WRITE | REQ_SYNC | REQ_UNPLUG; bio->bi_bdev = rdev->bdev; bio->bi_sector = sector; bio_add_page(bio, page, size, 0); bio->bi_private = rdev; bio->bi_end_io = super_written; - bio->bi_rw = rw; atomic_inc(&mddev->pending_writes); - if (!test_bit(BarriersNotsupp, &rdev->flags)) { - struct bio *rbio; - rw |= REQ_HARDBARRIER; - rbio = bio_clone(bio, GFP_NOIO); - rbio->bi_private = bio; - rbio->bi_end_io = super_written_barrier; - submit_bio(rw, rbio); - } else - submit_bio(rw, bio); + submit_bio(REQ_WRITE | REQ_SYNC | REQ_UNPLUG | REQ_FLUSH | REQ_FUA, + bio); } void md_super_wait(mddev_t *mddev) { - /* wait for all superblock writes that were scheduled to complete. - * if any had to be retried (due to BARRIER problems), retry them - */ + /* wait for all superblock writes that were scheduled to complete */ DEFINE_WAIT(wq); for(;;) { prepare_to_wait(&mddev->sb_wait, &wq, TASK_UNINTERRUPTIBLE); if (atomic_read(&mddev->pending_writes)==0) break; - while (mddev->biolist) { - struct bio *bio; - spin_lock_irq(&mddev->write_lock); - bio = mddev->biolist; - mddev->biolist = bio->bi_next ; - bio->bi_next = NULL; - spin_unlock_irq(&mddev->write_lock); - submit_bio(bio->bi_rw, bio); - } schedule(); } finish_wait(&mddev->sb_wait, &wq); @@ -1070,7 +1007,6 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) clear_bit(Faulty, &rdev->flags); clear_bit(In_sync, &rdev->flags); clear_bit(WriteMostly, &rdev->flags); - clear_bit(BarriersNotsupp, &rdev->flags); if (mddev->raid_disks == 0) { mddev->major_version = 0; @@ -1485,7 +1421,6 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev) clear_bit(Faulty, &rdev->flags); clear_bit(In_sync, &rdev->flags); clear_bit(WriteMostly, &rdev->flags); - clear_bit(BarriersNotsupp, &rdev->flags); if (mddev->raid_disks == 0) { mddev->major_version = 1; @@ -4504,7 +4439,6 @@ int md_run(mddev_t *mddev) /* may be over-ridden by personality */ mddev->resync_max_sectors = mddev->dev_sectors; - mddev->barriers_work = 1; mddev->ok_start_degraded = start_dirty_degraded; if (start_readonly && mddev->ro == 0) @@ -4683,7 +4617,6 @@ static void md_clean(mddev_t *mddev) mddev->recovery = 0; mddev->in_sync = 0; mddev->degraded = 0; - mddev->barriers_work = 0; mddev->safemode = 0; mddev->bitmap_info.offset = 0; mddev->bitmap_info.default_offset = 0; diff --git a/drivers/md/md.h b/drivers/md/md.h index 3931299788dc..112a2c32db0c 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -87,7 +87,6 @@ struct mdk_rdev_s #define Faulty 1 /* device is known to have a fault */ #define In_sync 2 /* device is in_sync with rest of array */ #define WriteMostly 4 /* Avoid reading if at all possible */ -#define BarriersNotsupp 5 /* REQ_HARDBARRIER is not supported */ #define AllReserved 6 /* If whole device is reserved for * one array */ #define AutoDetected 7 /* added by auto-detect */ @@ -273,13 +272,6 @@ struct mddev_s int degraded; /* whether md should consider * adding a spare */ - int barriers_work; /* initialised to true, cleared as soon - * as a barrier request to slave - * fails. Only supported - */ - struct bio *biolist; /* bios that need to be retried - * because REQ_HARDBARRIER is not supported - */ atomic_t recovery_active; /* blocks scheduled, but not written */ wait_queue_head_t recovery_wait; @@ -339,16 +331,13 @@ struct mddev_s struct attribute_group *to_remove; struct plug_handle *plug; /* if used by personality */ - /* Generic barrier handling. - * If there is a pending barrier request, all other - * writes are blocked while the devices are flushed. - * The last to finish a flush schedules a worker to - * submit the barrier request (without the barrier flag), - * then submit more flush requests. + /* Generic flush handling. + * The last to finish preflush schedules a worker to submit + * the rest of the request (without the REQ_FLUSH flag). */ - struct bio *barrier; + struct bio *flush_bio; atomic_t flush_pending; - struct work_struct barrier_work; + struct work_struct flush_work; struct work_struct event_work; /* used by dm to report failure event */ }; @@ -502,7 +491,7 @@ extern void md_done_sync(mddev_t *mddev, int blocks, int ok); extern void md_error(mddev_t *mddev, mdk_rdev_t *rdev); extern int mddev_congested(mddev_t *mddev, int bits); -extern void md_barrier_request(mddev_t *mddev, struct bio *bio); +extern void md_flush_request(mddev_t *mddev, struct bio *bio); extern void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, sector_t sector, int size, struct page *page); extern void md_super_wait(mddev_t *mddev); diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 0307d217e7a4..6d7ddf32ef2e 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -142,8 +142,8 @@ static int multipath_make_request(mddev_t *mddev, struct bio * bio) struct multipath_bh * mp_bh; struct multipath_info *multipath; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 6f7af46d623c..a39f4c355e55 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -483,8 +483,8 @@ static int raid0_make_request(mddev_t *mddev, struct bio *bio) struct strip_zone *zone; mdk_rdev_t *tmp_dev; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 0b830bbe1d8b..378a25894c57 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -319,83 +319,74 @@ static void raid1_end_write_request(struct bio *bio, int error) if (r1_bio->bios[mirror] == bio) break; - if (error == -EOPNOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) { - set_bit(BarriersNotsupp, &conf->mirrors[mirror].rdev->flags); - set_bit(R1BIO_BarrierRetry, &r1_bio->state); - r1_bio->mddev->barriers_work = 0; - /* Don't rdev_dec_pending in this branch - keep it for the retry */ - } else { + /* + * 'one mirror IO has finished' event handler: + */ + r1_bio->bios[mirror] = NULL; + to_put = bio; + if (!uptodate) { + md_error(r1_bio->mddev, conf->mirrors[mirror].rdev); + /* an I/O failed, we can't clear the bitmap */ + set_bit(R1BIO_Degraded, &r1_bio->state); + } else /* - * this branch is our 'one mirror IO has finished' event handler: + * Set R1BIO_Uptodate in our master bio, so that we + * will return a good error code for to the higher + * levels even if IO on some other mirrored buffer + * fails. + * + * The 'master' represents the composite IO operation + * to user-side. So if something waits for IO, then it + * will wait for the 'master' bio. */ - r1_bio->bios[mirror] = NULL; - to_put = bio; - if (!uptodate) { - md_error(r1_bio->mddev, conf->mirrors[mirror].rdev); - /* an I/O failed, we can't clear the bitmap */ - set_bit(R1BIO_Degraded, &r1_bio->state); - } else - /* - * Set R1BIO_Uptodate in our master bio, so that - * we will return a good error code for to the higher - * levels even if IO on some other mirrored buffer fails. - * - * The 'master' represents the composite IO operation to - * user-side. So if something waits for IO, then it will - * wait for the 'master' bio. - */ - set_bit(R1BIO_Uptodate, &r1_bio->state); - - update_head_pos(mirror, r1_bio); - - if (behind) { - if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags)) - atomic_dec(&r1_bio->behind_remaining); - - /* In behind mode, we ACK the master bio once the I/O has safely - * reached all non-writemostly disks. Setting the Returned bit - * ensures that this gets done only once -- we don't ever want to - * return -EIO here, instead we'll wait */ - - if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && - test_bit(R1BIO_Uptodate, &r1_bio->state)) { - /* Maybe we can return now */ - if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { - struct bio *mbio = r1_bio->master_bio; - PRINTK(KERN_DEBUG "raid1: behind end write sectors %llu-%llu\n", - (unsigned long long) mbio->bi_sector, - (unsigned long long) mbio->bi_sector + - (mbio->bi_size >> 9) - 1); - bio_endio(mbio, 0); - } + set_bit(R1BIO_Uptodate, &r1_bio->state); + + update_head_pos(mirror, r1_bio); + + if (behind) { + if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags)) + atomic_dec(&r1_bio->behind_remaining); + + /* + * In behind mode, we ACK the master bio once the I/O + * has safely reached all non-writemostly + * disks. Setting the Returned bit ensures that this + * gets done only once -- we don't ever want to return + * -EIO here, instead we'll wait + */ + if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && + test_bit(R1BIO_Uptodate, &r1_bio->state)) { + /* Maybe we can return now */ + if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { + struct bio *mbio = r1_bio->master_bio; + PRINTK(KERN_DEBUG "raid1: behind end write sectors %llu-%llu\n", + (unsigned long long) mbio->bi_sector, + (unsigned long long) mbio->bi_sector + + (mbio->bi_size >> 9) - 1); + bio_endio(mbio, 0); } } - rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev); } + rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev); + /* - * * Let's see if all mirrored write operations have finished * already. */ if (atomic_dec_and_test(&r1_bio->remaining)) { - if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) - reschedule_retry(r1_bio); - else { - /* it really is the end of this request */ - if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { - /* free extra copy of the data pages */ - int i = bio->bi_vcnt; - while (i--) - safe_put_page(bio->bi_io_vec[i].bv_page); - } - /* clear the bitmap if all writes complete successfully */ - bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector, - r1_bio->sectors, - !test_bit(R1BIO_Degraded, &r1_bio->state), - behind); - md_write_end(r1_bio->mddev); - raid_end_bio_io(r1_bio); + if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { + /* free extra copy of the data pages */ + int i = bio->bi_vcnt; + while (i--) + safe_put_page(bio->bi_io_vec[i].bv_page); } + /* clear the bitmap if all writes complete successfully */ + bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector, + r1_bio->sectors, + !test_bit(R1BIO_Degraded, &r1_bio->state), + behind); + md_write_end(r1_bio->mddev); + raid_end_bio_io(r1_bio); } if (to_put) @@ -788,16 +779,13 @@ static int make_request(mddev_t *mddev, struct bio * bio) struct page **behind_pages = NULL; const int rw = bio_data_dir(bio); const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); - unsigned long do_barriers; + const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA)); mdk_rdev_t *blocked_rdev; /* * Register the new request and wait if the reconstruction * thread has put up a bar for new requests. * Continue immediately if no resync is active currently. - * We test barriers_work *after* md_write_start as md_write_start - * may cause the first superblock write, and that will check out - * if barriers work. */ md_write_start(mddev, bio); /* wait on superblock update early */ @@ -821,13 +809,6 @@ static int make_request(mddev_t *mddev, struct bio * bio) } finish_wait(&conf->wait_barrier, &w); } - if (unlikely(!mddev->barriers_work && - (bio->bi_rw & REQ_HARDBARRIER))) { - if (rw == WRITE) - md_write_end(mddev); - bio_endio(bio, -EOPNOTSUPP); - return 0; - } wait_barrier(conf); @@ -959,10 +940,6 @@ static int make_request(mddev_t *mddev, struct bio * bio) atomic_set(&r1_bio->remaining, 0); atomic_set(&r1_bio->behind_remaining, 0); - do_barriers = bio->bi_rw & REQ_HARDBARRIER; - if (do_barriers) - set_bit(R1BIO_Barrier, &r1_bio->state); - bio_list_init(&bl); for (i = 0; i < disks; i++) { struct bio *mbio; @@ -975,7 +952,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset; mbio->bi_bdev = conf->mirrors[i].rdev->bdev; mbio->bi_end_io = raid1_end_write_request; - mbio->bi_rw = WRITE | do_barriers | do_sync; + mbio->bi_rw = WRITE | do_flush_fua | do_sync; mbio->bi_private = r1_bio; if (behind_pages) { @@ -1634,41 +1611,6 @@ static void raid1d(mddev_t *mddev) if (test_bit(R1BIO_IsSync, &r1_bio->state)) { sync_request_write(mddev, r1_bio); unplug = 1; - } else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) { - /* some requests in the r1bio were REQ_HARDBARRIER - * requests which failed with -EOPNOTSUPP. Hohumm.. - * Better resubmit without the barrier. - * We know which devices to resubmit for, because - * all others have had their bios[] entry cleared. - * We already have a nr_pending reference on these rdevs. - */ - int i; - const unsigned long do_sync = (r1_bio->master_bio->bi_rw & REQ_SYNC); - clear_bit(R1BIO_BarrierRetry, &r1_bio->state); - clear_bit(R1BIO_Barrier, &r1_bio->state); - for (i=0; i < conf->raid_disks; i++) - if (r1_bio->bios[i]) - atomic_inc(&r1_bio->remaining); - for (i=0; i < conf->raid_disks; i++) - if (r1_bio->bios[i]) { - struct bio_vec *bvec; - int j; - - bio = bio_clone(r1_bio->master_bio, GFP_NOIO); - /* copy pages from the failed bio, as - * this might be a write-behind device */ - __bio_for_each_segment(bvec, bio, j, 0) - bvec->bv_page = bio_iovec_idx(r1_bio->bios[i], j)->bv_page; - bio_put(r1_bio->bios[i]); - bio->bi_sector = r1_bio->sector + - conf->mirrors[i].rdev->data_offset; - bio->bi_bdev = conf->mirrors[i].rdev->bdev; - bio->bi_end_io = raid1_end_write_request; - bio->bi_rw = WRITE | do_sync; - bio->bi_private = r1_bio; - r1_bio->bios[i] = bio; - generic_make_request(bio); - } } else { int disk; diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h index 5f2d443ae28a..adf8cfd73313 100644 --- a/drivers/md/raid1.h +++ b/drivers/md/raid1.h @@ -117,8 +117,6 @@ struct r1bio_s { #define R1BIO_IsSync 1 #define R1BIO_Degraded 2 #define R1BIO_BehindIO 3 -#define R1BIO_Barrier 4 -#define R1BIO_BarrierRetry 5 /* For write-behind requests, we call bi_end_io when * the last non-write-behind device completes, providing * any write was successful. Otherwise we call when diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 84718383124d..f0d082f749be 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -800,12 +800,13 @@ static int make_request(mddev_t *mddev, struct bio * bio) int chunk_sects = conf->chunk_mask + 1; const int rw = bio_data_dir(bio); const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); + const unsigned long do_fua = (bio->bi_rw & REQ_FUA); struct bio_list bl; unsigned long flags; mdk_rdev_t *blocked_rdev; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } @@ -965,7 +966,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) conf->mirrors[d].rdev->data_offset; mbio->bi_bdev = conf->mirrors[d].rdev->bdev; mbio->bi_end_io = raid10_end_write_request; - mbio->bi_rw = WRITE | do_sync; + mbio->bi_rw = WRITE | do_sync | do_fua; mbio->bi_private = r10_bio; atomic_inc(&r10_bio->remaining); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 69b0a169e43d..31140d1259dc 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -506,9 +506,12 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) int rw; struct bio *bi; mdk_rdev_t *rdev; - if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) - rw = WRITE; - else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) + if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) { + if (test_and_clear_bit(R5_WantFUA, &sh->dev[i].flags)) + rw = WRITE_FUA; + else + rw = WRITE; + } else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) rw = READ; else continue; @@ -1031,6 +1034,8 @@ ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx) while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { + if (wbi->bi_rw & REQ_FUA) + set_bit(R5_WantFUA, &dev->flags); tx = async_copy_data(1, wbi, dev->page, dev->sector, tx); wbi = r5_next_bio(wbi, dev->sector); @@ -1048,15 +1053,22 @@ static void ops_complete_reconstruct(void *stripe_head_ref) int pd_idx = sh->pd_idx; int qd_idx = sh->qd_idx; int i; + bool fua = false; pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector); + for (i = disks; i--; ) + fua |= test_bit(R5_WantFUA, &sh->dev[i].flags); + for (i = disks; i--; ) { struct r5dev *dev = &sh->dev[i]; - if (dev->written || i == pd_idx || i == qd_idx) + if (dev->written || i == pd_idx || i == qd_idx) { set_bit(R5_UPTODATE, &dev->flags); + if (fua) + set_bit(R5_WantFUA, &dev->flags); + } } if (sh->reconstruct_state == reconstruct_state_drain_run) @@ -3281,7 +3293,7 @@ static void handle_stripe5(struct stripe_head *sh) if (dec_preread_active) { /* We delay this until after ops_run_io so that if make_request - * is waiting on a barrier, it won't continue until the writes + * is waiting on a flush, it won't continue until the writes * have actually been submitted. */ atomic_dec(&conf->preread_active_stripes); @@ -3583,7 +3595,7 @@ static void handle_stripe6(struct stripe_head *sh) if (dec_preread_active) { /* We delay this until after ops_run_io so that if make_request - * is waiting on a barrier, it won't continue until the writes + * is waiting on a flush, it won't continue until the writes * have actually been submitted. */ atomic_dec(&conf->preread_active_stripes); @@ -3978,14 +3990,8 @@ static int make_request(mddev_t *mddev, struct bio * bi) const int rw = bio_data_dir(bi); int remaining; - if (unlikely(bi->bi_rw & REQ_HARDBARRIER)) { - /* Drain all pending writes. We only really need - * to ensure they have been submitted, but this is - * easier. - */ - mddev->pers->quiesce(mddev, 1); - mddev->pers->quiesce(mddev, 0); - md_barrier_request(mddev, bi); + if (unlikely(bi->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bi); return 0; } @@ -4103,7 +4109,7 @@ static int make_request(mddev_t *mddev, struct bio * bi) finish_wait(&conf->wait_for_overlap, &w); set_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - if (mddev->barrier && + if ((bi->bi_rw & REQ_SYNC) && !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) atomic_inc(&conf->preread_active_stripes); release_stripe(sh); @@ -4126,13 +4132,6 @@ static int make_request(mddev_t *mddev, struct bio * bi) bio_endio(bi, 0); } - if (mddev->barrier) { - /* We need to wait for the stripes to all be handled. - * So: wait for preread_active_stripes to drop to 0. - */ - wait_event(mddev->thread->wqueue, - atomic_read(&conf->preread_active_stripes) == 0); - } return 0; } diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 36eaed5dfd6e..2ace0582b409 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -275,6 +275,7 @@ struct r6_state { * filling */ #define R5_Wantdrain 13 /* dev->towrite needs to be drained */ +#define R5_WantFUA 14 /* Write should be FUA */ /* * Write method */ diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index e876678176be..9c0b42bfe089 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -128,7 +128,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock mq->req = NULL; blk_queue_prep_rq(mq->queue, mmc_prep_request); - blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN); queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue); if (mmc_can_erase(card)) { queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 8373ca0de8e0..9b106d83b0cd 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2197,7 +2197,6 @@ static void dasd_setup_queue(struct dasd_block *block) */ blk_queue_max_segment_size(block->request_queue, PAGE_SIZE); blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1); - blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN); } /* diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 93984c9dfe14..aee73fafccc8 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -2850,12 +2850,6 @@ aic7xxx_done(struct aic7xxx_host *p, struct aic7xxx_scb *scb) aic_dev->r_total++; ptr = aic_dev->r_bins; } - if(cmd->device->simple_tags && cmd->request->cmd_flags & REQ_HARDBARRIER) - { - aic_dev->barrier_total++; - if(scb->tag_action == MSG_ORDERED_Q_TAG) - aic_dev->ordered_total++; - } x = scb->sg_length; x >>= 10; for(i=0; i<6; i++) @@ -10125,7 +10119,6 @@ static void aic7xxx_buildscb(struct aic7xxx_host *p, struct scsi_cmnd *cmd, struct aic_dev_data *aic_dev = cmd->device->hostdata; struct scsi_device *sdptr = cmd->device; unsigned char tindex = TARGET_INDEX(cmd); - struct request *req = cmd->request; int use_sg; mask = (0x01 << tindex); @@ -10144,19 +10137,8 @@ static void aic7xxx_buildscb(struct aic7xxx_host *p, struct scsi_cmnd *cmd, /* We always force TEST_UNIT_READY to untagged */ if (cmd->cmnd[0] != TEST_UNIT_READY && sdptr->simple_tags) { - if (req->cmd_flags & REQ_HARDBARRIER) - { - if(sdptr->ordered_tags) - { - hscb->control |= MSG_ORDERED_Q_TAG; - scb->tag_action = MSG_ORDERED_Q_TAG; - } - } - else - { - hscb->control |= MSG_SIMPLE_Q_TAG; - scb->tag_action = MSG_SIMPLE_Q_TAG; - } + hscb->control |= MSG_SIMPLE_Q_TAG; + scb->tag_action = MSG_SIMPLE_Q_TAG; } } if ( !(aic_dev->dtr_pending) && diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index f0cfba9a1fc8..535085cd27ec 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -130,17 +130,6 @@ static void sas_scsi_task_done(struct sas_task *task) sc->scsi_done(sc); } -static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd) -{ - enum task_attribute ta = TASK_ATTR_SIMPLE; - if (cmd->request && blk_rq_tagged(cmd->request)) { - if (cmd->device->ordered_tags && - (cmd->request->cmd_flags & REQ_HARDBARRIER)) - ta = TASK_ATTR_ORDERED; - } - return ta; -} - static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, struct domain_device *dev, gfp_t gfp_flags) @@ -160,7 +149,7 @@ static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, task->ssp_task.retry_count = 1; int_to_scsilun(cmd->device->lun, &lun); memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8); - task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd); + task->ssp_task.task_attr = TASK_ATTR_SIMPLE; memcpy(task->ssp_task.cdb, cmd->cmnd, 16); task->scatter = scsi_sglist(cmd); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index ffa0689ee840..20514c47a5aa 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2109,7 +2109,7 @@ static int sd_revalidate_disk(struct gendisk *disk) struct scsi_disk *sdkp = scsi_disk(disk); struct scsi_device *sdp = sdkp->device; unsigned char *buffer; - unsigned ordered; + unsigned flush = 0; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_revalidate_disk\n")); @@ -2151,17 +2151,15 @@ static int sd_revalidate_disk(struct gendisk *disk) /* * We now have all cache related info, determine how we deal - * with ordered requests. Note that as the current SCSI - * dispatch function can alter request order, we cannot use - * QUEUE_ORDERED_TAG_* even when ordered tag is supported. + * with flush requests. */ - if (sdkp->WCE) - ordered = sdkp->DPOFUA - ? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH; - else - ordered = QUEUE_ORDERED_DRAIN; + if (sdkp->WCE) { + flush |= REQ_FLUSH; + if (sdkp->DPOFUA) + flush |= REQ_FUA; + } - blk_queue_ordered(sdkp->disk->queue, ordered); + blk_queue_flush(sdkp->disk->queue, flush); set_capacity(disk, sdkp->capacity); kfree(buffer); diff --git a/fs/block_dev.c b/fs/block_dev.c index 50e8c8582faa..b737451e2e9d 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -370,7 +370,7 @@ int blkdev_fsync(struct file *filp, int datasync) */ mutex_unlock(&bd_inode->i_mutex); - error = blkdev_issue_flush(bdev, GFP_KERNEL, NULL, BLKDEV_IFL_WAIT); + error = blkdev_issue_flush(bdev, GFP_KERNEL, NULL); if (error == -EOPNOTSUPP) error = 0; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 64f10082f048..5e789f4a3ed0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2063,7 +2063,7 @@ static void btrfs_end_buffer_write_sync(struct buffer_head *bh, int uptodate) if (uptodate) { set_buffer_uptodate(bh); } else { - if (!buffer_eopnotsupp(bh) && printk_ratelimit()) { + if (printk_ratelimit()) { printk(KERN_WARNING "lost page write due to " "I/O error on %s\n", bdevname(bh->b_bdev, b)); @@ -2200,21 +2200,10 @@ static int write_dev_supers(struct btrfs_device *device, bh->b_end_io = btrfs_end_buffer_write_sync; } - if (i == last_barrier && do_barriers && device->barriers) { - ret = submit_bh(WRITE_BARRIER, bh); - if (ret == -EOPNOTSUPP) { - printk("btrfs: disabling barriers on dev %s\n", - device->name); - set_buffer_uptodate(bh); - device->barriers = 0; - /* one reference for submit_bh */ - get_bh(bh); - lock_buffer(bh); - ret = submit_bh(WRITE_SYNC, bh); - } - } else { + if (i == last_barrier && do_barriers) + ret = submit_bh(WRITE_FLUSH_FUA, bh); + else ret = submit_bh(WRITE_SYNC, bh); - } if (ret) errors++; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 32d094002a57..0b81ecdb101c 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -1695,8 +1695,7 @@ static int remove_extent_backref(struct btrfs_trans_handle *trans, static void btrfs_issue_discard(struct block_device *bdev, u64 start, u64 len) { - blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL, 0); } static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr, diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index dd318ff280b2..e25e46a8b4e2 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -398,7 +398,6 @@ static noinline int device_list_add(const char *path, device->work.func = pending_bios_fn; memcpy(device->uuid, disk_super->dev_item.uuid, BTRFS_UUID_SIZE); - device->barriers = 1; spin_lock_init(&device->io_lock); device->name = kstrdup(path, GFP_NOFS); if (!device->name) { @@ -462,7 +461,6 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig) device->devid = orig_dev->devid; device->work.func = pending_bios_fn; memcpy(device->uuid, orig_dev->uuid, sizeof(device->uuid)); - device->barriers = 1; spin_lock_init(&device->io_lock); INIT_LIST_HEAD(&device->dev_list); INIT_LIST_HEAD(&device->dev_alloc_list); @@ -1489,7 +1487,6 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) trans = btrfs_start_transaction(root, 0); lock_chunks(root); - device->barriers = 1; device->writeable = 1; device->work.func = pending_bios_fn; generate_random_uuid(device->uuid); @@ -3084,7 +3081,6 @@ static struct btrfs_device *add_missing_dev(struct btrfs_root *root, return NULL; list_add(&device->dev_list, &fs_devices->devices); - device->barriers = 1; device->dev_root = root->fs_info->dev_root; device->devid = devid; device->work.func = pending_bios_fn; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 31b0fabdd2ea..2b638b6e4eea 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -42,7 +42,6 @@ struct btrfs_device { int running_pending; u64 generation; - int barriers; int writeable; int in_fs_metadata; diff --git a/fs/buffer.c b/fs/buffer.c index 3e7dca279d1c..7f0b9b083f77 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -156,7 +156,7 @@ void end_buffer_write_sync(struct buffer_head *bh, int uptodate) if (uptodate) { set_buffer_uptodate(bh); } else { - if (!buffer_eopnotsupp(bh) && !quiet_error(bh)) { + if (!quiet_error(bh)) { buffer_io_error(bh); printk(KERN_WARNING "lost page write due to " "I/O error on %s\n", @@ -2891,7 +2891,6 @@ static void end_bio_bh_io_sync(struct bio *bio, int err) if (err == -EOPNOTSUPP) { set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); - set_bit(BH_Eopnotsupp, &bh->b_state); } if (unlikely (test_bit(BIO_QUIET,&bio->bi_flags))) @@ -3031,10 +3030,6 @@ int __sync_dirty_buffer(struct buffer_head *bh, int rw) bh->b_end_io = end_buffer_write_sync; ret = submit_bh(rw, bh); wait_on_buffer(bh); - if (buffer_eopnotsupp(bh)) { - clear_buffer_eopnotsupp(bh); - ret = -EOPNOTSUPP; - } if (!ret && !buffer_uptodate(bh)) ret = -EIO; } else { diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index d7e9f74dc3a6..09b13bb34c94 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -90,7 +90,6 @@ int ext3_sync_file(struct file *file, int datasync) * storage */ if (needs_barrier) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); return ret; } diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c index 592adf2e546e..3f3ff5ee8f9d 100644 --- a/fs/ext4/fsync.c +++ b/fs/ext4/fsync.c @@ -128,10 +128,9 @@ int ext4_sync_file(struct file *file, int datasync) (journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, - NULL, BLKDEV_IFL_WAIT); + NULL); ret = jbd2_log_wait_commit(journal, commit_tid); } else if (journal->j_flags & JBD2_BARRIER) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); return ret; } diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 4b4ad4b7ce57..19aa0d44d822 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2566,7 +2566,7 @@ static inline void ext4_issue_discard(struct super_block *sb, discard_block = block + ext4_group_first_block_no(sb, block_group); trace_ext4_discard_blocks(sb, (unsigned long long) discard_block, count); - ret = sb_issue_discard(sb, discard_block, count); + ret = sb_issue_discard(sb, discard_block, count, GFP_NOFS, 0); if (ret == EOPNOTSUPP) { ext4_warning(sb, "discard not supported, disabling"); clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD); diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index 81184d3b75a3..b47d2c9f4fa1 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -577,7 +577,8 @@ int fat_free_clusters(struct inode *inode, int cluster) sb_issue_discard(sb, fat_clus_to_blknr(sbi, first_cl), - nr_clus * sbi->sec_per_clus); + nr_clus * sbi->sec_per_clus, + GFP_NOFS, 0); first_cl = cluster; } diff --git a/fs/fat/misc.c b/fs/fat/misc.c index 1736f2356388..970e682ea754 100644 --- a/fs/fat/misc.c +++ b/fs/fat/misc.c @@ -255,10 +255,7 @@ int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs) for (i = 0; i < nr_bhs; i++) { wait_on_buffer(bhs[i]); - if (buffer_eopnotsupp(bhs[i])) { - clear_buffer_eopnotsupp(bhs[i]); - err = -EOPNOTSUPP; - } else if (!err && !buffer_uptodate(bhs[i])) + if (!err && !buffer_uptodate(bhs[i])) err = -EIO; } return err; diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index ac750bd31a6f..eb01f3575e10 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -592,22 +592,13 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull) lh->lh_hash = cpu_to_be32(hash); bh->b_end_io = end_buffer_write_sync; - if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) - goto skip_barrier; get_bh(bh); - submit_bh(WRITE_BARRIER | REQ_META, bh); - wait_on_buffer(bh); - if (buffer_eopnotsupp(bh)) { - clear_buffer_eopnotsupp(bh); - set_buffer_uptodate(bh); - fs_info(sdp, "barrier sync failed - disabling barriers\n"); - set_bit(SDF_NOBARRIERS, &sdp->sd_flags); - lock_buffer(bh); -skip_barrier: - get_bh(bh); + if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) submit_bh(WRITE_SYNC | REQ_META, bh); - wait_on_buffer(bh); - } + else + submit_bh(WRITE_FLUSH_FUA | REQ_META, bh); + wait_on_buffer(bh); + if (!buffer_uptodate(bh)) gfs2_io_error_bh(sdp, bh); brelse(bh); diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 171a744f8e45..38b3ea1abacc 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -854,8 +854,7 @@ static void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset, if ((start + nr_sects) != blk) { rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, - BLKDEV_IFL_WAIT | - BLKDEV_IFL_BARRIER); + 0); if (rv) goto fail; nr_sects = 0; @@ -869,8 +868,7 @@ start_new_extent: } } if (nr_sects) { - rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, 0); if (rv) goto fail; } diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 95d8c11c929e..484c5e5fa8af 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -137,34 +137,10 @@ static int journal_write_commit_record(journal_t *journal, JBUFFER_TRACE(descriptor, "write commit block"); set_buffer_dirty(bh); - if (journal->j_flags & JFS_BARRIER) { - ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_BARRIER); - - /* - * Is it possible for another commit to fail at roughly - * the same time as this one? If so, we don't want to - * trust the barrier flag in the super, but instead want - * to remember if we sent a barrier request - */ - if (ret == -EOPNOTSUPP) { - char b[BDEVNAME_SIZE]; - - printk(KERN_WARNING - "JBD: barrier-based sync failed on %s - " - "disabling barriers\n", - bdevname(journal->j_dev, b)); - spin_lock(&journal->j_state_lock); - journal->j_flags &= ~JFS_BARRIER; - spin_unlock(&journal->j_state_lock); - - /* And try again, without the barrier */ - set_buffer_uptodate(bh); - set_buffer_dirty(bh); - ret = sync_dirty_buffer(bh); - } - } else { + if (journal->j_flags & JFS_BARRIER) + ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_FLUSH_FUA); + else ret = sync_dirty_buffer(bh); - } put_bh(bh); /* One for getblk() */ journal_put_journal_head(descriptor); diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 5247e7ffdcb4..6571a056e55d 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -532,8 +532,7 @@ int jbd2_cleanup_journal_tail(journal_t *journal) */ if ((journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) - blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); if (!(journal->j_flags & JBD2_ABORT)) jbd2_journal_update_superblock(journal, 1); return 0; diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 7c068c189d80..cb43c605cfaa 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -134,25 +134,11 @@ static int journal_submit_commit_record(journal_t *journal, if (journal->j_flags & JBD2_BARRIER && !JBD2_HAS_INCOMPAT_FEATURE(journal, - JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) { - ret = submit_bh(WRITE_SYNC_PLUG | WRITE_BARRIER, bh); - if (ret == -EOPNOTSUPP) { - printk(KERN_WARNING - "JBD2: Disabling barriers on %s, " - "not supported by device\n", journal->j_devname); - write_lock(&journal->j_state_lock); - journal->j_flags &= ~JBD2_BARRIER; - write_unlock(&journal->j_state_lock); - - /* And try again, without the barrier */ - lock_buffer(bh); - set_buffer_uptodate(bh); - clear_buffer_dirty(bh); - ret = submit_bh(WRITE_SYNC_PLUG, bh); - } - } else { + JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) + ret = submit_bh(WRITE_SYNC_PLUG | WRITE_FLUSH_FUA, bh); + else ret = submit_bh(WRITE_SYNC_PLUG, bh); - } + *cbh = bh; return ret; } @@ -166,29 +152,8 @@ static int journal_wait_on_commit_record(journal_t *journal, { int ret = 0; -retry: clear_buffer_dirty(bh); wait_on_buffer(bh); - if (buffer_eopnotsupp(bh) && (journal->j_flags & JBD2_BARRIER)) { - printk(KERN_WARNING - "JBD2: %s: disabling barries on %s - not supported " - "by device\n", __func__, journal->j_devname); - write_lock(&journal->j_state_lock); - journal->j_flags &= ~JBD2_BARRIER; - write_unlock(&journal->j_state_lock); - - lock_buffer(bh); - clear_buffer_dirty(bh); - set_buffer_uptodate(bh); - bh->b_end_io = journal_end_buffer_io_sync; - - ret = submit_bh(WRITE_SYNC_PLUG, bh); - if (ret) { - unlock_buffer(bh); - return ret; - } - goto retry; - } if (unlikely(!buffer_uptodate(bh))) ret = -EIO; @@ -701,6 +666,16 @@ start_journal_io: } } + err = journal_finish_inode_data_buffers(journal, commit_transaction); + if (err) { + printk(KERN_WARNING + "JBD2: Detected IO errors while flushing file data " + "on %s\n", journal->j_devname); + if (journal->j_flags & JBD2_ABORT_ON_SYNCDATA_ERR) + jbd2_journal_abort(journal, err); + err = 0; + } + /* * If the journal is not located on the file system device, * then we must flush the file system device before we issue @@ -709,8 +684,7 @@ start_journal_io: if (commit_transaction->t_flushed_data_blocks && (journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) - blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); /* Done it all: now write the commit record asynchronously. */ if (JBD2_HAS_INCOMPAT_FEATURE(journal, @@ -719,19 +693,6 @@ start_journal_io: &cbh, crc32_sum); if (err) __jbd2_journal_abort_hard(journal); - if (journal->j_flags & JBD2_BARRIER) - blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); - } - - err = journal_finish_inode_data_buffers(journal, commit_transaction); - if (err) { - printk(KERN_WARNING - "JBD2: Detected IO errors while flushing file data " - "on %s\n", journal->j_devname); - if (journal->j_flags & JBD2_ABORT_ON_SYNCDATA_ERR) - jbd2_journal_abort(journal, err); - err = 0; } /* Lo and behold: we have just managed to send a transaction to @@ -845,6 +806,11 @@ wait_for_iobuf: } if (!err && !is_journal_aborted(journal)) err = journal_wait_on_commit_record(journal, cbh); + if (JBD2_HAS_INCOMPAT_FEATURE(journal, + JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) && + journal->j_flags & JBD2_BARRIER) { + blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL); + } if (err) jbd2_journal_abort(journal, err); diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 922263393c76..faa5078ff751 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -178,17 +178,9 @@ static int nilfs_sync_super(struct nilfs_sb_info *sbi, int flag) retry: set_buffer_dirty(nilfs->ns_sbh[0]); - if (nilfs_test_opt(sbi, BARRIER)) { err = __sync_dirty_buffer(nilfs->ns_sbh[0], - WRITE_SYNC | WRITE_BARRIER); - if (err == -EOPNOTSUPP) { - nilfs_warning(sbi->s_super, __func__, - "barrier-based sync failed. " - "disabling barriers\n"); - nilfs_clear_opt(sbi, BARRIER); - goto retry; - } + WRITE_SYNC | WRITE_FLUSH_FUA); } else { err = sync_dirty_buffer(nilfs->ns_sbh[0]); } diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c index ba7c10c917fc..d27715103376 100644 --- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -775,9 +775,7 @@ int nilfs_discard_segments(struct the_nilfs *nilfs, __u64 *segnump, ret = blkdev_issue_discard(nilfs->ns_bdev, start * sects_per_block, nblocks * sects_per_block, - GFP_NOFS, - BLKDEV_IFL_WAIT | - BLKDEV_IFL_BARRIER); + GFP_NOFS, 0); if (ret < 0) return ret; nblocks = 0; @@ -787,8 +785,7 @@ int nilfs_discard_segments(struct the_nilfs *nilfs, __u64 *segnump, ret = blkdev_issue_discard(nilfs->ns_bdev, start * sects_per_block, nblocks * sects_per_block, - GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + GFP_NOFS, 0); return ret; } diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c index 6846371498b6..91f080cc76c8 100644 --- a/fs/reiserfs/file.c +++ b/fs/reiserfs/file.c @@ -152,8 +152,7 @@ static int reiserfs_sync_file(struct file *filp, int datasync) barrier_done = reiserfs_commit_for_inode(inode); reiserfs_write_unlock(inode->i_sb); if (barrier_done != 1 && reiserfs_barrier_flush(inode->i_sb)) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); if (barrier_done < 0) return barrier_done; return (err < 0) ? -EIO : 0; diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 812e2c05aa29..076c8b194682 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -138,13 +138,6 @@ static int reiserfs_clean_and_file_buffer(struct buffer_head *bh) return 0; } -static void disable_barrier(struct super_block *s) -{ - REISERFS_SB(s)->s_mount_opt &= ~(1 << REISERFS_BARRIER_FLUSH); - printk("reiserfs: disabling flush barriers on %s\n", - reiserfs_bdevname(s)); -} - static struct reiserfs_bitmap_node *allocate_bitmap_node(struct super_block *sb) { @@ -677,30 +670,6 @@ static void submit_ordered_buffer(struct buffer_head *bh) submit_bh(WRITE, bh); } -static int submit_barrier_buffer(struct buffer_head *bh) -{ - get_bh(bh); - bh->b_end_io = reiserfs_end_ordered_io; - clear_buffer_dirty(bh); - if (!buffer_uptodate(bh)) - BUG(); - return submit_bh(WRITE_BARRIER, bh); -} - -static void check_barrier_completion(struct super_block *s, - struct buffer_head *bh) -{ - if (buffer_eopnotsupp(bh)) { - clear_buffer_eopnotsupp(bh); - disable_barrier(s); - set_buffer_uptodate(bh); - set_buffer_dirty(bh); - reiserfs_write_unlock(s); - sync_dirty_buffer(bh); - reiserfs_write_lock(s); - } -} - #define CHUNK_SIZE 32 struct buffer_chunk { struct buffer_head *bh[CHUNK_SIZE]; @@ -1009,7 +978,6 @@ static int flush_commit_list(struct super_block *s, struct buffer_head *tbh = NULL; unsigned int trans_id = jl->j_trans_id; struct reiserfs_journal *journal = SB_JOURNAL(s); - int barrier = 0; int retval = 0; int write_len; @@ -1094,24 +1062,6 @@ static int flush_commit_list(struct super_block *s, } atomic_dec(&journal->j_async_throttle); - /* We're skipping the commit if there's an error */ - if (retval || reiserfs_is_journal_aborted(journal)) - barrier = 0; - - /* wait on everything written so far before writing the commit - * if we are in barrier mode, send the commit down now - */ - barrier = reiserfs_barrier_flush(s); - if (barrier) { - int ret; - lock_buffer(jl->j_commit_bh); - ret = submit_barrier_buffer(jl->j_commit_bh); - if (ret == -EOPNOTSUPP) { - set_buffer_uptodate(jl->j_commit_bh); - disable_barrier(s); - barrier = 0; - } - } for (i = 0; i < (jl->j_len + 1); i++) { bn = SB_ONDISK_JOURNAL_1st_BLOCK(s) + (jl->j_start + i) % SB_ONDISK_JOURNAL_SIZE(s); @@ -1143,27 +1093,22 @@ static int flush_commit_list(struct super_block *s, BUG_ON(atomic_read(&(jl->j_commit_left)) != 1); - if (!barrier) { - /* If there was a write error in the journal - we can't commit - * this transaction - it will be invalid and, if successful, - * will just end up propagating the write error out to - * the file system. */ - if (likely(!retval && !reiserfs_is_journal_aborted (journal))) { - if (buffer_dirty(jl->j_commit_bh)) - BUG(); - mark_buffer_dirty(jl->j_commit_bh) ; - reiserfs_write_unlock(s); - sync_dirty_buffer(jl->j_commit_bh) ; - reiserfs_write_lock(s); - } - } else { + /* If there was a write error in the journal - we can't commit + * this transaction - it will be invalid and, if successful, + * will just end up propagating the write error out to + * the file system. */ + if (likely(!retval && !reiserfs_is_journal_aborted (journal))) { + if (buffer_dirty(jl->j_commit_bh)) + BUG(); + mark_buffer_dirty(jl->j_commit_bh) ; reiserfs_write_unlock(s); - wait_on_buffer(jl->j_commit_bh); + if (reiserfs_barrier_flush(s)) + __sync_dirty_buffer(jl->j_commit_bh, WRITE_FLUSH_FUA); + else + sync_dirty_buffer(jl->j_commit_bh); reiserfs_write_lock(s); } - check_barrier_completion(s, jl->j_commit_bh); - /* If there was a write error in the journal - we can't commit this * transaction - it will be invalid and, if successful, will just end * up propagating the write error out to the filesystem. */ @@ -1319,26 +1264,15 @@ static int _update_journal_header_block(struct super_block *sb, jh->j_first_unflushed_offset = cpu_to_le32(offset); jh->j_mount_id = cpu_to_le32(journal->j_mount_id); - if (reiserfs_barrier_flush(sb)) { - int ret; - lock_buffer(journal->j_header_bh); - ret = submit_barrier_buffer(journal->j_header_bh); - if (ret == -EOPNOTSUPP) { - set_buffer_uptodate(journal->j_header_bh); - disable_barrier(sb); - goto sync; - } - reiserfs_write_unlock(sb); - wait_on_buffer(journal->j_header_bh); - reiserfs_write_lock(sb); - check_barrier_completion(sb, journal->j_header_bh); - } else { - sync: - set_buffer_dirty(journal->j_header_bh); - reiserfs_write_unlock(sb); + set_buffer_dirty(journal->j_header_bh); + reiserfs_write_unlock(sb); + + if (reiserfs_barrier_flush(sb)) + __sync_dirty_buffer(journal->j_header_bh, WRITE_FLUSH_FUA); + else sync_dirty_buffer(journal->j_header_bh); - reiserfs_write_lock(sb); - } + + reiserfs_write_lock(sb); if (!buffer_uptodate(journal->j_header_bh)) { reiserfs_warning(sb, "journal-837", "IO error during journal replay"); diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index 286e36e21dae..1846a0dd7035 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -924,19 +924,7 @@ xfs_buf_iodone_work( xfs_buf_t *bp = container_of(work, xfs_buf_t, b_iodone_work); - /* - * We can get an EOPNOTSUPP to ordered writes. Here we clear the - * ordered flag and reissue them. Because we can't tell the higher - * layers directly that they should not issue ordered I/O anymore, they - * need to check if the _XFS_BARRIER_FAILED flag was set during I/O completion. - */ - if ((bp->b_error == EOPNOTSUPP) && - (bp->b_flags & (XBF_ORDERED|XBF_ASYNC)) == (XBF_ORDERED|XBF_ASYNC)) { - trace_xfs_buf_ordered_retry(bp, _RET_IP_); - bp->b_flags &= ~XBF_ORDERED; - bp->b_flags |= _XFS_BARRIER_FAILED; - xfs_buf_iorequest(bp); - } else if (bp->b_iodone) + if (bp->b_iodone) (*(bp->b_iodone))(bp); else if (bp->b_flags & XBF_ASYNC) xfs_buf_relse(bp); @@ -1195,7 +1183,7 @@ _xfs_buf_ioapply( if (bp->b_flags & XBF_ORDERED) { ASSERT(!(bp->b_flags & XBF_READ)); - rw = WRITE_BARRIER; + rw = WRITE_FLUSH_FUA; } else if (bp->b_flags & XBF_LOG_BUFFER) { ASSERT(!(bp->b_flags & XBF_READ_AHEAD)); bp->b_flags &= ~_XBF_RUN_QUEUES; diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index 2a05614f0b92..9d021c73ea52 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -86,14 +86,6 @@ typedef enum { */ #define _XBF_PAGE_LOCKED (1 << 22) -/* - * If we try a barrier write, but it fails we have to communicate - * this to the upper layers. Unfortunately b_error gets overwritten - * when the buffer is re-issued so we have to add another flag to - * keep this information. - */ -#define _XFS_BARRIER_FAILED (1 << 23) - typedef unsigned int xfs_buf_flags_t; #define XFS_BUF_FLAGS \ @@ -114,8 +106,7 @@ typedef unsigned int xfs_buf_flags_t; { _XBF_PAGES, "PAGES" }, \ { _XBF_RUN_QUEUES, "RUN_QUEUES" }, \ { _XBF_DELWRI_Q, "DELWRI_Q" }, \ - { _XBF_PAGE_LOCKED, "PAGE_LOCKED" }, \ - { _XFS_BARRIER_FAILED, "BARRIER_FAILED" } + { _XBF_PAGE_LOCKED, "PAGE_LOCKED" } typedef enum { diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index a4e07974955b..08fd3102128c 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -693,8 +693,7 @@ void xfs_blkdev_issue_flush( xfs_buftarg_t *buftarg) { - blkdev_issue_flush(buftarg->bt_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(buftarg->bt_bdev, GFP_KERNEL, NULL); } STATIC void diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h index be5dffd282a1..8fe311a456e2 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/linux-2.6/xfs_trace.h @@ -325,7 +325,6 @@ DEFINE_BUF_EVENT(xfs_buf_lock); DEFINE_BUF_EVENT(xfs_buf_lock_done); DEFINE_BUF_EVENT(xfs_buf_cond_lock); DEFINE_BUF_EVENT(xfs_buf_unlock); -DEFINE_BUF_EVENT(xfs_buf_ordered_retry); DEFINE_BUF_EVENT(xfs_buf_iowait); DEFINE_BUF_EVENT(xfs_buf_iowait_done); DEFINE_BUF_EVENT(xfs_buf_delwri_queue); diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 33f718f92a48..ba8e36e0b4e7 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -917,19 +917,6 @@ xlog_iodone(xfs_buf_t *bp) l = iclog->ic_log; /* - * If the _XFS_BARRIER_FAILED flag was set by a lower - * layer, it means the underlying device no longer supports - * barrier I/O. Warn loudly and turn off barriers. - */ - if (bp->b_flags & _XFS_BARRIER_FAILED) { - bp->b_flags &= ~_XFS_BARRIER_FAILED; - l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER; - xfs_fs_cmn_err(CE_WARN, l->l_mp, - "xlog_iodone: Barriers are no longer supported" - " by device. Disabling barriers\n"); - } - - /* * Race to shutdown the filesystem if we see an error. */ if (XFS_TEST_ERROR((XFS_BUF_GETERROR(bp)), l->l_mp, diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index ca83a97c9715..36edadf5b41a 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -143,7 +143,6 @@ enum rq_flag_bits { __REQ_FAILED, /* set if the request failed */ __REQ_QUIET, /* don't worry about errors */ __REQ_PREEMPT, /* set for "ide_preempt" requests */ - __REQ_ORDERED_COLOR, /* is before or after barrier */ __REQ_ALLOCED, /* request came from our alloc pool */ __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ @@ -168,7 +167,8 @@ enum rq_flag_bits { (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \ - REQ_META| REQ_DISCARD | REQ_NOIDLE) + REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) +#define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_UNPLUG (1 << __REQ_UNPLUG) #define REQ_RAHEAD (1 << __REQ_RAHEAD) @@ -184,7 +184,6 @@ enum rq_flag_bits { #define REQ_FAILED (1 << __REQ_FAILED) #define REQ_QUIET (1 << __REQ_QUIET) #define REQ_PREEMPT (1 << __REQ_PREEMPT) -#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR) #define REQ_ALLOCED (1 << __REQ_ALLOCED) #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c54906f678f..accbd0e5c893 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -355,12 +355,14 @@ struct request_queue struct blk_trace *blk_trace; #endif /* - * reserved for flush operations + * for flush operations */ - unsigned int ordered, next_ordered, ordseq; - int orderr, ordcolor; - struct request pre_flush_rq, bar_rq, post_flush_rq; - struct request *orig_bar_rq; + unsigned int flush_flags; + unsigned int flush_seq; + int flush_err; + struct request flush_rq; + struct request *orig_flush_rq; + struct list_head pending_flushes; struct mutex sysfs_lock; @@ -462,56 +464,6 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) __clear_bit(flag, &q->queue_flags); } -enum { - /* - * Hardbarrier is supported with one of the following methods. - * - * NONE : hardbarrier unsupported - * DRAIN : ordering by draining is enough - * DRAIN_FLUSH : ordering by draining w/ pre and post flushes - * DRAIN_FUA : ordering by draining w/ pre flush and FUA write - * TAG : ordering by tag is enough - * TAG_FLUSH : ordering by tag w/ pre and post flushes - * TAG_FUA : ordering by tag w/ pre flush and FUA write - */ - QUEUE_ORDERED_BY_DRAIN = 0x01, - QUEUE_ORDERED_BY_TAG = 0x02, - QUEUE_ORDERED_DO_PREFLUSH = 0x10, - QUEUE_ORDERED_DO_BAR = 0x20, - QUEUE_ORDERED_DO_POSTFLUSH = 0x40, - QUEUE_ORDERED_DO_FUA = 0x80, - - QUEUE_ORDERED_NONE = 0x00, - - QUEUE_ORDERED_DRAIN = QUEUE_ORDERED_BY_DRAIN | - QUEUE_ORDERED_DO_BAR, - QUEUE_ORDERED_DRAIN_FLUSH = QUEUE_ORDERED_DRAIN | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_POSTFLUSH, - QUEUE_ORDERED_DRAIN_FUA = QUEUE_ORDERED_DRAIN | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_FUA, - - QUEUE_ORDERED_TAG = QUEUE_ORDERED_BY_TAG | - QUEUE_ORDERED_DO_BAR, - QUEUE_ORDERED_TAG_FLUSH = QUEUE_ORDERED_TAG | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_POSTFLUSH, - QUEUE_ORDERED_TAG_FUA = QUEUE_ORDERED_TAG | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_FUA, - - /* - * Ordered operation sequence - */ - QUEUE_ORDSEQ_STARTED = 0x01, /* flushing in progress */ - QUEUE_ORDSEQ_DRAIN = 0x02, /* waiting for the queue to be drained */ - QUEUE_ORDSEQ_PREFLUSH = 0x04, /* pre-flushing in progress */ - QUEUE_ORDSEQ_BAR = 0x08, /* original barrier req in progress */ - QUEUE_ORDSEQ_POSTFLUSH = 0x10, /* post-flushing in progress */ - QUEUE_ORDSEQ_DONE = 0x20, -}; - #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) @@ -521,7 +473,6 @@ enum { #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) -#define blk_queue_flushing(q) ((q)->ordseq) #define blk_queue_stackable(q) \ test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags) #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags) @@ -592,7 +543,8 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER) + (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \ + REQ_FLUSH | REQ_FUA) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ @@ -881,12 +833,8 @@ extern void blk_queue_update_dma_alignment(struct request_queue *, int); extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *); extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *); extern void blk_queue_rq_timeout(struct request_queue *, unsigned int); +extern void blk_queue_flush(struct request_queue *q, unsigned int flush); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); -extern int blk_queue_ordered(struct request_queue *, unsigned); -extern bool blk_do_ordered(struct request_queue *, struct request **); -extern unsigned blk_ordered_cur_seq(struct request_queue *); -extern unsigned blk_ordered_req_seq(struct request *); -extern bool blk_ordered_complete_seq(struct request_queue *, unsigned, int); extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *); extern void blk_dump_rq_flags(struct request *, char *); @@ -919,27 +867,20 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt, return NULL; return bqt->tag_index[tag]; } -enum{ - BLKDEV_WAIT, /* wait for completion */ - BLKDEV_BARRIER, /* issue request with barrier */ - BLKDEV_SECURE, /* secure discard */ -}; -#define BLKDEV_IFL_WAIT (1 << BLKDEV_WAIT) -#define BLKDEV_IFL_BARRIER (1 << BLKDEV_BARRIER) -#define BLKDEV_IFL_SECURE (1 << BLKDEV_SECURE) -extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *, - unsigned long); + +#define BLKDEV_DISCARD_SECURE 0x01 /* secure discard */ + +extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *); extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, - sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); -static inline int sb_issue_discard(struct super_block *sb, - sector_t block, sector_t nr_blocks) -{ - block <<= (sb->s_blocksize_bits - 9); - nr_blocks <<= (sb->s_blocksize_bits - 9); - return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + sector_t nr_sects, gfp_t gfp_mask); +static inline int sb_issue_discard(struct super_block *sb, sector_t block, + sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags) +{ + return blkdev_issue_discard(sb->s_bdev, block << (sb->s_blocksize_bits - 9), + nr_blocks << (sb->s_blocksize_bits - 9), + gfp_mask, flags); } extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index ec94c12f21da..dd1b25b2641c 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -32,7 +32,6 @@ enum bh_state_bits { BH_Delay, /* Buffer is not yet allocated on disk */ BH_Boundary, /* Block is followed by a discontiguity */ BH_Write_EIO, /* I/O error on write */ - BH_Eopnotsupp, /* operation not supported (barrier) */ BH_Unwritten, /* Buffer is allocated on disk but not written */ BH_Quiet, /* Buffer Error Prinks to be quiet */ @@ -124,7 +123,6 @@ BUFFER_FNS(Async_Write, async_write) BUFFER_FNS(Delay, delay) BUFFER_FNS(Boundary, boundary) BUFFER_FNS(Write_EIO, write_io_error) -BUFFER_FNS(Eopnotsupp, eopnotsupp) BUFFER_FNS(Unwritten, unwritten) #define bh_offset(bh) ((unsigned long)(bh)->b_data & ~PAGE_MASK) diff --git a/include/linux/fs.h b/include/linux/fs.h index 63d069bd80b7..34a1cbcb5615 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -135,12 +135,12 @@ struct inodes_stat_t { * immediately after submission. The write equivalent * of READ_SYNC. * WRITE_ODIRECT_PLUG Special case write for O_DIRECT only. - * WRITE_BARRIER Like WRITE_SYNC, but tells the block layer that all - * previously submitted writes must be safely on storage - * before this one is started. Also guarantees that when - * this write is complete, it itself is also safely on - * storage. Prevents reordering of writes on both sides - * of this IO. + * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush. + * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on + * non-volatile media on completion. + * WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded + * by a cache flush and data is guaranteed to be on + * non-volatile media on completion. * */ #define RW_MASK REQ_WRITE @@ -156,16 +156,12 @@ struct inodes_stat_t { #define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG) #define WRITE_ODIRECT_PLUG (WRITE | REQ_SYNC) #define WRITE_META (WRITE | REQ_META) -#define WRITE_BARRIER (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ - REQ_HARDBARRIER) - -/* - * These aren't really reads or writes, they pass down information about - * parts of device that are now unused by the file system. - */ -#define DISCARD_NOBARRIER (WRITE | REQ_DISCARD) -#define DISCARD_BARRIER (WRITE | REQ_DISCARD | REQ_HARDBARRIER) -#define DISCARD_SECURE (DISCARD_NOBARRIER | REQ_SECURE) +#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ + REQ_FLUSH) +#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ + REQ_FUA) +#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ + REQ_FLUSH | REQ_FUA) #define SEL_IN 1 #define SEL_OUT 2 diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index 17231385cb37..d6e7994aa634 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -97,13 +97,9 @@ static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth) static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg) { struct request *req = cmd->request; - struct scsi_device *sdev = cmd->device; if (blk_rq_tagged(req)) { - if (sdev->ordered_tags && req->cmd_flags & REQ_HARDBARRIER) - *msg++ = MSG_ORDERED_TAG; - else - *msg++ = MSG_SIMPLE_TAG; + *msg++ = MSG_SIMPLE_TAG; *msg++ = req->tag; return 2; } diff --git a/mm/swapfile.c b/mm/swapfile.c index 7c703ff2f36f..9fc7bac7db0c 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -139,7 +139,7 @@ static int discard_swap(struct swap_info_struct *si) nr_blocks = ((sector_t)se->nr_pages - 1) << (PAGE_SHIFT - 9); if (nr_blocks) { err = blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT); + nr_blocks, GFP_KERNEL, 0); if (err) return err; cond_resched(); @@ -150,7 +150,7 @@ static int discard_swap(struct swap_info_struct *si) nr_blocks = (sector_t)se->nr_pages << (PAGE_SHIFT - 9); err = blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT); + nr_blocks, GFP_KERNEL, 0); if (err) break; @@ -189,7 +189,7 @@ static void discard_swap_cluster(struct swap_info_struct *si, start_block <<= PAGE_SHIFT - 9; nr_blocks <<= PAGE_SHIFT - 9; if (blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_NOIO, BLKDEV_IFL_WAIT)) + nr_blocks, GFP_NOIO, 0)) break; } |