summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/e1000e/82571.c6
-rw-r--r--drivers/net/e1000e/defines.h2
-rw-r--r--drivers/net/e1000e/e1000.h28
-rw-r--r--drivers/net/e1000e/es2lan.c1
-rw-r--r--drivers/net/e1000e/netdev.c53
-rw-r--r--drivers/net/e1000e/param.c2
6 files changed, 88 insertions, 4 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index d3d4a57e2450..ca663f19d7df 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1801,7 +1801,8 @@ struct e1000_info e1000_82571_info = {
| FLAG_RESET_OVERWRITES_LAA /* errata */
| FLAG_TARC_SPEED_MODE_BIT /* errata */
| FLAG_APME_CHECK_PORT_B,
- .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
@@ -1819,7 +1820,8 @@ struct e1000_info e1000_82572_info = {
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_TARC_SPEED_MODE_BIT, /* errata */
- .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 93b3bedae8d2..d3f7a9c3f973 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -446,7 +446,9 @@
/* Transmit Descriptor Control */
#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
/* Enable the counting of desc. still to be processed. */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f9a31c82f871..5ec0af59eeab 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -153,6 +153,33 @@ struct e1000_info;
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
+#define DEFAULT_RDTR 0
+#define DEFAULT_RADV 8
+#define BURST_RDTR 0x20
+#define BURST_RADV 0x20
+
+/*
+ * in the case of WTHRESH, it appears at least the 82571/2 hardware
+ * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when
+ * WTHRESH=4, and since we want 64 bytes at a time written back, set
+ * it to 5
+ */
+#define E1000_TXDCTL_DMA_BURST_ENABLE \
+ (E1000_TXDCTL_GRAN | /* set descriptor granularity */ \
+ E1000_TXDCTL_COUNT_DESC | \
+ (5 << 16) | /* wthresh must be +1 more than desired */\
+ (1 << 8) | /* hthresh */ \
+ 0x1f) /* pthresh */
+
+#define E1000_RXDCTL_DMA_BURST_ENABLE \
+ (0x01000000 | /* set descriptor granularity */ \
+ (4 << 16) | /* set writeback threshold */ \
+ (4 << 8) | /* set prefetch threshold */ \
+ 0x20) /* set hthresh */
+
+#define E1000_TIDV_FPD (1 << 31)
+#define E1000_RDTR_FPD (1 << 31)
+
enum e1000_boards {
board_82571,
board_82572,
@@ -425,6 +452,7 @@ struct e1000_info {
#define FLAG2_DISABLE_ASPM_L1 (1 << 3)
#define FLAG2_HAS_PHY_STATS (1 << 4)
#define FLAG2_HAS_EEE (1 << 5)
+#define FLAG2_DMA_BURST (1 << 6)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 45aebb4a6fe1..24f8ac9cf703 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1494,6 +1494,7 @@ struct e1000_info e1000_es2_info = {
| FLAG_APME_CHECK_PORT_B
| FLAG_DISABLE_FC_PAUSE_TIME /* errata */
| FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
+ .flags2 = FLAG2_DMA_BURST,
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_80003es2lan,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c69563c3ce96..1aa4228e860a 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2650,6 +2650,26 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
/* Tx irq moderation */
ew32(TADV, adapter->tx_abs_int_delay);
+ if (adapter->flags2 & FLAG2_DMA_BURST) {
+ u32 txdctl = er32(TXDCTL(0));
+ txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
+ E1000_TXDCTL_WTHRESH);
+ /*
+ * set up some performance related parameters to encourage the
+ * hardware to use the bus more efficiently in bursts, depends
+ * on the tx_int_delay to be enabled,
+ * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time
+ * hthresh = 1 ==> prefetch when one or more available
+ * pthresh = 0x1f ==> prefetch if internal cache 31 or less
+ * BEWARE: this seems to work but should be considered first if
+ * there are tx hangs or other tx related bugs
+ */
+ txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
+ ew32(TXDCTL(0), txdctl);
+ /* erratum work around: set txdctl the same for both queues */
+ ew32(TXDCTL(1), txdctl);
+ }
+
/* Program the Transmit Control Register */
tctl = er32(TCTL);
tctl &= ~E1000_TCTL_CT;
@@ -2872,6 +2892,29 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
e1e_flush();
msleep(10);
+ if (adapter->flags2 & FLAG2_DMA_BURST) {
+ /*
+ * set the writeback threshold (only takes effect if the RDTR
+ * is set). set GRAN=1 and write back up to 0x4 worth, and
+ * enable prefetching of 0x20 rx descriptors
+ * granularity = 01
+ * wthresh = 04,
+ * hthresh = 04,
+ * pthresh = 0x20
+ */
+ ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
+ ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
+
+ /*
+ * override the delay timers for enabling bursting, only if
+ * the value was not set by the user via module options
+ */
+ if (adapter->rx_int_delay == DEFAULT_RDTR)
+ adapter->rx_int_delay = BURST_RDTR;
+ if (adapter->rx_abs_int_delay == DEFAULT_RADV)
+ adapter->rx_abs_int_delay = BURST_RADV;
+ }
+
/* set the Receive Delay Timer Register */
ew32(RDTR, adapter->rx_int_delay);
@@ -4235,6 +4278,16 @@ link_up:
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
+ /* flush partial descriptors to memory before detecting tx hang */
+ if (adapter->flags2 & FLAG2_DMA_BURST) {
+ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+ ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+ /*
+ * no need to flush the writes because the timeout code does
+ * an er32 first thing
+ */
+ }
+
/*
* With 82571 controllers, LAA may be overwritten due to controller
* reset from the other port. Set the appropriate LAA in RAR[0]
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 34aeec13bb16..3d36911f77f3 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -91,7 +91,6 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
* Valid Range: 0-65535
*/
E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
-#define DEFAULT_RDTR 0
#define MAX_RXDELAY 0xFFFF
#define MIN_RXDELAY 0
@@ -101,7 +100,6 @@ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
* Valid Range: 0-65535
*/
E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
-#define DEFAULT_RADV 8
#define MAX_RXABSDELAY 0xFFFF
#define MIN_RXABSDELAY 0
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 21:09:11 +0300