diff options
| -rw-r--r-- | drivers/net/dsa/mt7530-mdio.c | 7 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 135 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.h | 16 |
3 files changed, 87 insertions, 71 deletions
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c index 088533663b83..fa3ee85a99c1 100644 --- a/drivers/net/dsa/mt7530-mdio.c +++ b/drivers/net/dsa/mt7530-mdio.c @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = { }; static int -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) +mt7531_create_sgmii(struct mt7530_priv *priv) { struct regmap_config *mt7531_pcs_config[2] = {}; struct phylink_pcs *pcs; struct regmap *regmap; int i, ret = 0; - /* MT7531AE has two SGMII units for port 5 and port 6 - * MT7531BE has only one SGMII unit for port 6 - */ - for (i = dual_sgmii ? 0 : 1; i < 2; i++) { + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) { mt7531_pcs_config[i] = devm_kzalloc(priv->dev, sizeof(struct regmap_config), GFP_KERNEL); diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index cf2ff7680c15..68be38ae66e0 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -487,15 +487,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) return 0; } -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) -{ - u32 val; - - val = mt7530_read(priv, MT7531_TOP_SIG_SR); - - return (val & PAD_DUAL_SGMII_EN) != 0; -} - static int mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { @@ -510,9 +501,6 @@ mt7531_pll_setup(struct mt7530_priv *priv) u32 xtal; u32 val; - if (mt7531_dual_sgmii_supported(priv)) - return; - val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); hwstrap = mt7530_read(priv, MT7531_HWTRAP); @@ -920,8 +908,6 @@ static const char *p5_intf_modes(unsigned int p5_interface) return "PHY P4"; case P5_INTF_SEL_GMAC5: return "GMAC5"; - case P5_INTF_SEL_GMAC5_SGMII: - return "GMAC5_SGMII"; default: return "unknown"; } @@ -956,9 +942,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ val &= ~MHWTRAP_P5_DIS; break; - case P5_DISABLED: - interface = PHY_INTERFACE_MODE_NA; - break; default: dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", priv->p5_intf_sel); @@ -992,8 +975,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); - priv->p5_interface = interface; - unlock_exit: mutex_unlock(&priv->reg_mutex); } @@ -1035,10 +1016,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); - /* Set CPU port number */ - if (priv->id == ID_MT7530 || priv->id == ID_MT7621) - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that * is affine to the inbound user port. @@ -2344,16 +2321,13 @@ mt7530_setup(struct dsa_switch *ds) return ret; /* Setup port 5 */ - priv->p5_intf_sel = P5_DISABLED; - interface = PHY_INTERFACE_MODE_NA; - if (!dsa_is_unused_port(ds, 5)) { priv->p5_intf_sel = P5_INTF_SEL_GMAC5; - ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface); - if (ret && ret != -ENODEV) - return ret; } else { - /* Scan the ethernet nodes. look for GMAC1, lookup used phy */ + /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY. + * Set priv->p5_intf_sel to the appropriate value if PHY muxing + * is detected. + */ for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, "mediatek,eth-mac")) @@ -2384,6 +2358,10 @@ mt7530_setup(struct dsa_switch *ds) of_node_put(phy_node); break; } + + if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 || + priv->p5_intf_sel == P5_INTF_SEL_PHY_P4) + mt7530_setup_port5(ds, interface); } #ifdef CONFIG_GPIOLIB @@ -2394,8 +2372,6 @@ mt7530_setup(struct dsa_switch *ds) } #endif /* CONFIG_GPIOLIB */ - mt7530_setup_port5(ds, interface); - /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) @@ -2492,6 +2468,12 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } + /* MT7531AE has got two SGMII units. One for port 5, one for port 6. + * MT7531BE has got only one SGMII unit which is for port 6. + */ + val = mt7530_read(priv, MT7531_TOP_SIG_SR); + priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); + /* all MACs must be forced link-down before sw reset */ for (i = 0; i < MT7530_NUM_PORTS; i++) mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); @@ -2501,21 +2483,18 @@ mt7531_setup(struct dsa_switch *ds) SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); - mt7531_pll_setup(priv); - - if (mt7531_dual_sgmii_supported(priv)) { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; - + if (!priv->p5_sgmii) { + mt7531_pll_setup(priv); + } else { /* Let ds->user_mii_bus be able to access external phy. */ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, MT7531_EXT_P_MDC_11); mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, MT7531_EXT_P_MDIO_12); - } else { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5; } - dev_dbg(ds->dev, "P5 support %s interface\n", - p5_intf_modes(priv->p5_intf_sel)); + + if (!dsa_is_unused_port(ds, 5)) + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); @@ -2553,12 +2532,14 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + /* Port 5 supports rgmii with delays, mii, and gmii. */ + case 5: phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); @@ -2566,7 +2547,8 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, config->supported_interfaces); break; - case 6: /* 1st cpu port */ + /* Port 6 supports rgmii and trgmii. */ + case 6: __set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_TRGMII, @@ -2575,30 +2557,30 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) -{ - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); -} - static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { struct mt7530_priv *priv = ds->priv; switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ - if (mt7531_is_rgmii_port(priv, port)) { + /* Port 5 supports rgmii with delays on MT7531BE, sgmii/802.3z on + * MT7531AE. + */ + case 5: + if (!priv->p5_sgmii) { phy_interface_set_rgmii(config->supported_interfaces); break; } fallthrough; - case 6: /* 1st cpu port supports sgmii/8023z only */ + /* Port 6 supports sgmii/802.3z. */ + case 6: __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_1000BASEX, @@ -2617,11 +2599,13 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, phy_interface_zero(config->supported_interfaces); switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); break; + /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */ case 6: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); @@ -2659,7 +2643,7 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, { u32 val; - if (!mt7531_is_rgmii_port(priv, port)) { + if (priv->p5_sgmii) { dev_err(priv->dev, "RGMII mode is not available for port %d\n", port); return -EINVAL; @@ -2785,12 +2769,12 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, u32 mcr_cur, mcr_new; switch (port) { - case 0 ... 4: /* Internal phy */ + case 0 ... 4: if (state->interface != PHY_INTERFACE_MODE_GMII && state->interface != PHY_INTERFACE_MODE_INTERNAL) goto unsupported; break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + case 5: if (priv->p5_interface == state->interface) break; @@ -2800,7 +2784,7 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, if (priv->p5_intf_sel != P5_DISABLED) priv->p5_interface = state->interface; break; - case 6: /* 1st cpu port */ + case 6: if (priv->p6_interface == state->interface) break; @@ -2903,7 +2887,7 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port) switch (port) { case 5: - if (mt7531_is_rgmii_port(priv, port)) + if (!priv->p5_sgmii) interface = PHY_INTERFACE_MODE_RGMII; else interface = PHY_INTERFACE_MODE_2500BASEX; @@ -3055,7 +3039,7 @@ mt753x_setup(struct dsa_switch *ds) mt7530_free_irq_common(priv); if (priv->create_sgmii) { - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv)); + ret = priv->create_sgmii(priv); if (ret && priv->irq) mt7530_free_irq(priv); } @@ -3093,6 +3077,36 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, return 0; } +static void +mt753x_conduit_state_change(struct dsa_switch *ds, + const struct net_device *conduit, + bool operational) +{ + struct dsa_port *cpu_dp = conduit->dsa_ptr; + struct mt7530_priv *priv = ds->priv; + int val = 0; + u8 mask; + + /* Set the CPU port to trap frames to for MT7530. Trapped frames will be + * forwarded to the numerically smallest CPU port whose conduit + * interface is up. + */ + if (priv->id != ID_MT7530 && priv->id != ID_MT7621) + return; + + mask = BIT(cpu_dp->index); + + if (operational) + priv->active_cpu_ports |= mask; + else + priv->active_cpu_ports &= ~mask; + + if (priv->active_cpu_ports) + val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports)); + + mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val); +} + static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { return 0; @@ -3148,6 +3162,7 @@ const struct dsa_switch_ops mt7530_switch_ops = { .phylink_mac_link_up = mt753x_phylink_mac_link_up, .get_mac_eee = mt753x_get_mac_eee, .set_mac_eee = mt753x_set_mac_eee, + .conduit_state_change = mt753x_conduit_state_change, }; EXPORT_SYMBOL_GPL(mt7530_switch_ops); diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 17e42d30fff4..80060cc740d2 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -41,8 +41,8 @@ enum mt753x_id { #define UNU_FFP(x) (((x) & 0xff) << 8) #define UNU_FFP_MASK UNU_FFP(~0) #define CPU_EN BIT(7) -#define CPU_PORT(x) ((x) << 4) -#define CPU_MASK (0xf << 4) +#define CPU_PORT_MASK GENMASK(6, 4) +#define CPU_PORT(x) FIELD_PREP(CPU_PORT_MASK, x) #define MIRROR_EN BIT(3) #define MIRROR_PORT(x) ((x) & 0x7) #define MIRROR_MASK 0x7 @@ -683,11 +683,10 @@ struct mt7530_port { /* Port 5 interface select definitions */ enum p5_interface_select { - P5_DISABLED = 0, + P5_DISABLED, P5_INTF_SEL_PHY_P0, P5_INTF_SEL_PHY_P4, P5_INTF_SEL_GMAC5, - P5_INTF_SEL_GMAC5_SGMII, }; struct mt7530_priv; @@ -756,10 +755,13 @@ struct mt753x_info { * registers * @p6_interface Holding the current port 6 interface * @p5_intf_sel: Holding the current port 5 interface select + * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch + * has got SGMII * @irq: IRQ number of the switch * @irq_domain: IRQ domain of the switch irq_chip * @irq_enable: IRQ enable bits, synced to SYS_INT_EN * @create_sgmii: Pointer to function creating SGMII PCS instance(s) + * @active_cpu_ports: Holding the active CPU ports */ struct mt7530_priv { struct device *dev; @@ -775,7 +777,8 @@ struct mt7530_priv { bool mcm; phy_interface_t p6_interface; phy_interface_t p5_interface; - unsigned int p5_intf_sel; + enum p5_interface_select p5_intf_sel; + bool p5_sgmii; u8 mirror_rx; u8 mirror_tx; struct mt7530_port ports[MT7530_NUM_PORTS]; @@ -785,7 +788,8 @@ struct mt7530_priv { int irq; struct irq_domain *irq_domain; u32 irq_enable; - int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii); + int (*create_sgmii)(struct mt7530_priv *priv); + u8 active_cpu_ports; }; struct mt7530_hw_vlan_entry { |