summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/char/ipmi/ipmi_bt_sm.c34
-rw-r--r--drivers/char/ipmi/ipmi_kcs_sm.c40
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c4
-rw-r--r--drivers/char/ipmi/ipmi_smic_sm.c6
4 files changed, 47 insertions, 37 deletions
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 33862670e285..7c4a195dfc9a 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -28,6 +28,8 @@
#include <linux/kernel.h> /* For printk. */
#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/ipmi_msgdefs.h> /* for completion codes */
#include "ipmi_si_sm.h"
@@ -36,6 +38,8 @@ static int bt_debug = 0x00; /* Production value 0, see following flags */
#define BT_DEBUG_ENABLE 1
#define BT_DEBUG_MSG 2
#define BT_DEBUG_STATES 4
+module_param(bt_debug, int, 0644);
+MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
and 64 byte buffers. However, one HP implementation wants 255 bytes of
@@ -43,7 +47,7 @@ static int bt_debug = 0x00; /* Production value 0, see following flags */
Since the Open IPMI architecture is single-message oriented at this
stage, the queue depth of BT is of no concern. */
-#define BT_NORMAL_TIMEOUT 2000000 /* seconds in microseconds */
+#define BT_NORMAL_TIMEOUT 5000000 /* seconds in microseconds */
#define BT_RETRY_LIMIT 2
#define BT_RESET_DELAY 6000000 /* 6 seconds after warm reset */
@@ -202,7 +206,7 @@ static int bt_get_result(struct si_sm_data *bt,
msg_len = bt->read_count - 2; /* account for length & seq */
/* Always NetFn, Cmd, cCode */
if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) {
- printk(KERN_WARNING "BT results: bad msg_len = %d\n", msg_len);
+ printk(KERN_DEBUG "BT results: bad msg_len = %d\n", msg_len);
data[0] = bt->write_data[1] | 0x4; /* Kludge a response */
data[1] = bt->write_data[3];
data[2] = IPMI_ERR_UNSPECIFIED;
@@ -240,7 +244,7 @@ static void reset_flags(struct si_sm_data *bt)
BT_CONTROL(BT_B_BUSY);
BT_CONTROL(BT_CLR_WR_PTR);
BT_CONTROL(BT_SMS_ATN);
-#ifdef DEVELOPMENT_ONLY_NOT_FOR_PRODUCTION
+
if (BT_STATUS & BT_B2H_ATN) {
int i;
BT_CONTROL(BT_H_BUSY);
@@ -250,7 +254,6 @@ static void reset_flags(struct si_sm_data *bt)
BMC2HOST;
BT_CONTROL(BT_H_BUSY);
}
-#endif
}
static inline void write_all_bytes(struct si_sm_data *bt)
@@ -295,7 +298,7 @@ static inline int read_all_bytes(struct si_sm_data *bt)
printk ("\n");
}
if (bt->seq != bt->write_data[2]) /* idiot check */
- printk(KERN_WARNING "BT: internal error: sequence mismatch\n");
+ printk(KERN_DEBUG "BT: internal error: sequence mismatch\n");
/* per the spec, the (NetFn, Seq, Cmd) tuples should match */
if ((bt->read_data[3] == bt->write_data[3]) && /* Cmd */
@@ -321,18 +324,18 @@ static void error_recovery(struct si_sm_data *bt, char *reason)
bt->timeout = BT_NORMAL_TIMEOUT; /* various places want to retry */
status = BT_STATUS;
- printk(KERN_WARNING "BT: %s in %s %s ", reason, STATE2TXT,
+ printk(KERN_DEBUG "BT: %s in %s %s\n", reason, STATE2TXT,
STATUS2TXT(buf));
(bt->error_retries)++;
if (bt->error_retries > BT_RETRY_LIMIT) {
- printk("retry limit (%d) exceeded\n", BT_RETRY_LIMIT);
+ printk(KERN_DEBUG "retry limit (%d) exceeded\n", BT_RETRY_LIMIT);
bt->state = BT_STATE_HOSED;
if (!bt->nonzero_status)
printk(KERN_ERR "IPMI: BT stuck, try power cycle\n");
else if (bt->seq == FIRST_SEQ + BT_RETRY_LIMIT) {
/* most likely during insmod */
- printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n");
+ printk(KERN_DEBUG "IPMI: BT reset (takes 5 secs)\n");
bt->state = BT_STATE_RESET1;
}
return;
@@ -340,11 +343,11 @@ static void error_recovery(struct si_sm_data *bt, char *reason)
/* Sometimes the BMC queues get in an "off-by-one" state...*/
if ((bt->state == BT_STATE_B2H_WAIT) && (status & BT_B2H_ATN)) {
- printk("retry B2H_WAIT\n");
+ printk(KERN_DEBUG "retry B2H_WAIT\n");
return;
}
- printk("restart command\n");
+ printk(KERN_DEBUG "restart command\n");
bt->state = BT_STATE_RESTART;
}
@@ -372,17 +375,6 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
return SI_SM_HOSED;
if (bt->state != BT_STATE_IDLE) { /* do timeout test */
-
- /* Certain states, on error conditions, can lock up a CPU
- because they are effectively in an infinite loop with
- CALL_WITHOUT_DELAY (right back here with time == 0).
- Prevent infinite lockup by ALWAYS decrementing timeout. */
-
- /* FIXME: bt_event is sometimes called with time > BT_NORMAL_TIMEOUT
- (noticed in ipmi_smic_sm.c January 2004) */
-
- if ((time <= 0) || (time >= BT_NORMAL_TIMEOUT))
- time = 100;
bt->timeout -= time;
if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) {
error_recovery(bt, "timed out");
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index d21853a594a3..dc83365ede4a 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -38,16 +38,24 @@
*/
#include <linux/kernel.h> /* For printk. */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/ipmi_msgdefs.h> /* for completion codes */
#include "ipmi_si_sm.h"
-/* Set this if you want a printout of why the state machine was hosed
- when it gets hosed. */
-#define DEBUG_HOSED_REASON
+/* kcs_debug is a bit-field
+ * KCS_DEBUG_ENABLE - turned on for now
+ * KCS_DEBUG_MSG - commands and their responses
+ * KCS_DEBUG_STATES - state machine
+ */
+#define KCS_DEBUG_STATES 4
+#define KCS_DEBUG_MSG 2
+#define KCS_DEBUG_ENABLE 1
-/* Print the state machine state on entry every time. */
-#undef DEBUG_STATE
+static int kcs_debug;
+module_param(kcs_debug, int, 0644);
+MODULE_PARM_DESC(kcs_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
/* The states the KCS driver may be in. */
enum kcs_states {
@@ -175,9 +183,8 @@ static inline void start_error_recovery(struct si_sm_data *kcs, char *reason)
{
(kcs->error_retries)++;
if (kcs->error_retries > MAX_ERROR_RETRIES) {
-#ifdef DEBUG_HOSED_REASON
- printk("ipmi_kcs_sm: kcs hosed: %s\n", reason);
-#endif
+ if (kcs_debug & KCS_DEBUG_ENABLE)
+ printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", reason);
kcs->state = KCS_HOSED;
} else {
kcs->state = KCS_ERROR0;
@@ -248,14 +255,21 @@ static void restart_kcs_transaction(struct si_sm_data *kcs)
static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data,
unsigned int size)
{
+ unsigned int i;
+
if ((size < 2) || (size > MAX_KCS_WRITE_SIZE)) {
return -1;
}
-
if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) {
return -2;
}
-
+ if (kcs_debug & KCS_DEBUG_MSG) {
+ printk(KERN_DEBUG "start_kcs_transaction -");
+ for (i = 0; i < size; i ++) {
+ printk(" %02x", (unsigned char) (data [i]));
+ }
+ printk ("\n");
+ }
kcs->error_retries = 0;
memcpy(kcs->write_data, data, size);
kcs->write_count = size;
@@ -305,9 +319,9 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
status = read_status(kcs);
-#ifdef DEBUG_STATE
- printk(" State = %d, %x\n", kcs->state, status);
-#endif
+ if (kcs_debug & KCS_DEBUG_STATES)
+ printk(KERN_DEBUG "KCS: State = %d, %x\n", kcs->state, status);
+
/* All states wait for ibf, so just do it here. */
if (!check_ibf(kcs, status, time))
return SI_SM_CALL_WITH_DELAY;
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index b6e5cbfb09f8..204e2e987e90 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -819,7 +819,7 @@ static void smi_timeout(unsigned long data)
enum si_sm_result smi_result;
unsigned long flags;
unsigned long jiffies_now;
- unsigned long time_diff;
+ long time_diff;
#ifdef DEBUG_TIMING
struct timeval t;
#endif
@@ -835,7 +835,7 @@ static void smi_timeout(unsigned long data)
printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
jiffies_now = jiffies;
- time_diff = ((jiffies_now - smi_info->last_timeout_jiffies)
+ time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
* SI_USEC_PER_JIFFY);
smi_result = smi_event_handler(smi_info, time_diff);
diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c
index add2aa2732f0..f17043da9dd5 100644
--- a/drivers/char/ipmi/ipmi_smic_sm.c
+++ b/drivers/char/ipmi/ipmi_smic_sm.c
@@ -43,6 +43,8 @@
#include <linux/kernel.h> /* For printk. */
#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/ipmi_msgdefs.h> /* for completion codes */
#include "ipmi_si_sm.h"
@@ -56,6 +58,8 @@
#define SMIC_DEBUG_ENABLE 1
static int smic_debug = 1;
+module_param(smic_debug, int, 0644);
+MODULE_PARM_DESC(smic_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
enum smic_states {
SMIC_IDLE,
@@ -76,7 +80,7 @@ enum smic_states {
#define SMIC_MAX_ERROR_RETRIES 3
/* Timeouts in microseconds. */
-#define SMIC_RETRY_TIMEOUT 100000
+#define SMIC_RETRY_TIMEOUT 2000000
/* SMIC Flags Register Bits */
#define SMIC_RX_DATA_READY 0x80
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-31 00:12:20 +0300