Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

1 files changed, 28 insertions, 2 deletions

diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 150829dd7998..7947e568e057 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -5,6 +5,7 @@
  * Test code for seccomp bpf.
  */
 
+#include <sys/types.h>
 #include <asm/siginfo.h>
 #define __have_siginfo_t 1
 #define __have_sigval_t 1
@@ -14,7 +15,6 @@
 #include <linux/filter.h>
 #include <sys/prctl.h>
 #include <sys/ptrace.h>
-#include <sys/types.h>
 #include <sys/user.h>
 #include <linux/prctl.h>
 #include <linux/ptrace.h>
@@ -1242,6 +1242,12 @@ TEST_F(TRACE_poke, getpid_runs_normally)
 # define ARCH_REGS     s390_regs
 # define SYSCALL_NUM   gprs[2]
 # define SYSCALL_RET   gprs[2]
+#elif defined(__mips__)
+# define ARCH_REGS	struct pt_regs
+# define SYSCALL_NUM	regs[2]
+# define SYSCALL_SYSCALL_NUM regs[4]
+# define SYSCALL_RET	regs[2]
+# define SYSCALL_NUM_RET_SHARE_REG
 #else
 # error "Do not know how to find your architecture's registers and syscalls"
 #endif
@@ -1249,7 +1255,7 @@ TEST_F(TRACE_poke, getpid_runs_normally)
 /* Use PTRACE_GETREGS and PTRACE_SETREGS when available. This is useful for
  * architectures without HAVE_ARCH_TRACEHOOK (e.g. User-mode Linux).
  */
-#if defined(__x86_64__) || defined(__i386__)
+#if defined(__x86_64__) || defined(__i386__) || defined(__mips__)
 #define HAVE_GETREGS
 #endif
 
@@ -1273,6 +1279,10 @@ int get_syscall(struct __test_metadata *_metadata, pid_t tracee)
 	}
 #endif
 
+#if defined(__mips__)
+	if (regs.SYSCALL_NUM == __NR_O32_Linux)
+		return regs.SYSCALL_SYSCALL_NUM;
+#endif
 	return regs.SYSCALL_NUM;
 }
 
@@ -1297,6 +1307,13 @@ void change_syscall(struct __test_metadata *_metadata,
 	{
 		regs.SYSCALL_NUM = syscall;
 	}
+#elif defined(__mips__)
+	{
+		if (regs.SYSCALL_NUM == __NR_O32_Linux)
+			regs.SYSCALL_SYSCALL_NUM = syscall;
+		else
+			regs.SYSCALL_NUM = syscall;
+	}
 
 #elif defined(__arm__)
 # ifndef PTRACE_SET_SYSCALL
@@ -1327,7 +1344,11 @@ void change_syscall(struct __test_metadata *_metadata,
 
 	/* If syscall is skipped, change return value. */
 	if (syscall == -1)
+#ifdef SYSCALL_NUM_RET_SHARE_REG
+		TH_LOG("Can't modify syscall return on this architecture");
+#else
 		regs.SYSCALL_RET = 1;
+#endif
 
 #ifdef HAVE_GETREGS
 	ret = ptrace(PTRACE_SETREGS, tracee, 0, &regs);
@@ -1465,8 +1486,13 @@ TEST_F(TRACE_syscall, syscall_dropped)
 	ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->prog, 0, 0);
 	ASSERT_EQ(0, ret);
 
+#ifdef SYSCALL_NUM_RET_SHARE_REG
+	/* gettid has been skipped */
+	EXPECT_EQ(-1, syscall(__NR_gettid));
+#else
 	/* gettid has been skipped and an altered return value stored. */
 	EXPECT_EQ(1, syscall(__NR_gettid));
+#endif
 	EXPECT_NE(self->mytid, syscall(__NR_gettid));
 }