Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
 "Main perf kernel side changes:

   - uprobes updates/fixes.  (Oleg Nesterov)

   - Add PERF_RECORD_SWITCH to indicate context switches and use it in
     tooling.  (Adrian Hunter)

   - Support BPF programs attached to uprobes and first steps for BPF
     tooling support.  (Wang Nan)

   - x86 generic x86 MSR-to-perf PMU driver.  (Andy Lutomirski)

   - x86 Intel PT, LBR and BTS updates.  (Alexander Shishkin)

   - x86 Intel Skylake support.  (Andi Kleen)

   - x86 Intel Knights Landing (KNL) RAPL support.  (Dasaratharaman
     Chandramouli)

   - x86 Intel Broadwell-DE uncore support.  (Kan Liang)

   - x86 hw breakpoints robustization (Andy Lutomirski)

  Main perf tooling side changes:

   - Support Intel PT in several tools, enabling the use of the
     processor trace feature introduced in Intel Broadwell processors:
     (Adrian Hunter)

       # dmesg | grep Performance
       # [0.188477] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
       # perf record -e intel_pt//u -a sleep 1
       [ perf record: Woken up 1 times to write data ]
       [ perf record: Captured and wrote 0.216 MB perf.data ]
       # perf script # then navigate in the tool output to some area, like this one:
       184 1030 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba661440 dl_main (/usr/lib64/ld-2.17.so)
       185 1457 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba669f10 _dl_new_object (/usr/lib64/ld-2.17.so)
       186 9f37 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba677b90 strlen (/usr/lib64/ld-2.17.so)
       187 7ba3 strlen (/usr/lib64/ld-2.17.so) => 7f21ba677c75 strlen (/usr/lib64/ld-2.17.so)
       188 7c78 strlen (/usr/lib64/ld-2.17.so) => 7f21ba669f3c _dl_new_object (/usr/lib64/ld-2.17.so)
       189 9f8a _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba65fab0 calloc@plt (/usr/lib64/ld-2.17.so)
       190 fab0 calloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e70 calloc (/usr/lib64/ld-2.17.so)
       191 5e87 calloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa90 malloc@plt (/usr/lib64/ld-2.17.so)
       192 fa90 malloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e60 malloc (/usr/lib64/ld-2.17.so)
       193 5e68 malloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so)
       194 fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) => 7f21ba675d50 __libc_memalign (/usr/lib64/ld-2.17.so)
       195 5d63 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e20 __libc_memalign (/usr/lib64/ld-2.17.so)
       196 5e40 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675d73 __libc_memalign (/usr/lib64/ld-2.17.so)
       197 5d97 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e18 __libc_memalign (/usr/lib64/ld-2.17.so)
       198 5e1e __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675df9 __libc_memalign (/usr/lib64/ld-2.17.so)
       199 5e10 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba669f8f _dl_new_object (/usr/lib64/ld-2.17.so)
       200 9fc2 _dl_new_object (/usr/lib64/ld-2.17.so) =>  7f21ba678e70 memcpy (/usr/lib64/ld-2.17.so)
       201 8e8c memcpy (/usr/lib64/ld-2.17.so) => 7f21ba678ea0 memcpy (/usr/lib64/ld-2.17.so)

   - Add support for using several Intel PT features (CYC, MTC packets),
     the relevant documentation was updated in:
         tools/perf/Documentation/intel-pt.txt
     briefly describing those packets, its purposes, how to configure
     them in the event config terms and relevant external documentation
     for further reading.  (Adrian Hunter)

   - Introduce support for probing at an absolute address, for user and
     kernel 'perf probe's, useful when one have the symbol maps on a
     developer machine but not on an embedded system.  (Wang Nan)

   - Add Intel BTS support, with a call-graph script to show it and PT
     in use in a GUI using 'perf script' python scripting with
     postgresql and Qt.  (Adrian Hunter)

   - Allow selecting the type of callchains per event, including
     disabling callchains in all but one entry in an event list, to save
     space, and also to ask for the callchains collected in one event to
     be used in other events.  (Kan Liang)

   - Beautify more syscall arguments in 'perf trace': (Arnaldo Carvalho
     de Melo)
       * A bunch more translate file/pathnames from pointers to strings.
       * Convert numbers to strings for the 'keyctl' syscall 'option'
         arg.
       * Add missing 'clockid' entries.

   - Introduce 'srcfile' sort key: (Andi Kleen)

       # perf record -F 10000 usleep 1
       # perf report --stdio --dsos '[kernel.vmlinux]' -s srcfile
       <SNIP>
       # Overhead  Source File
          26.49%  copy_page_64.S
           5.49%  signal.c
           0.51%  msr.h
       #

     It can be combined with other fields, for instance, experiment with
     '-s srcfile,symbol'.

     There are some oddities in some distros and with some specific
     DSOs, being investigated, so your mileage may vary.

   - Support per-event 'freq' term: (Namhyung Kim)

       $ perf record -e 'cpu/instructions,freq=1234/',cycles -c 1000 sleep 1
       $ perf evlist -F
       cpu/instructions,freq=1234/: sample_freq=1234
       cycles: sample_period=1000
       $

   - Deref sys_enter pointer args with contents from probe:vfs_getname,
     showing pathnames instead of pointers in many syscalls in 'perf
     trace'.  (Arnaldo Carvalho de Melo)

   - Stop collecting /proc/kallsyms in perf.data files, saving about
     4.5MB on a typical x86-64 system, use the the symbol resolution
     routines used in all the other tools (report, top, etc) now that we
     can ask libtraceevent to use perf's symbol resolution code.
     (Arnaldo Carvalho de Melo)

   - Allow filtering out of perf's PID via 'perf record --exclude-perf'.
     (Wang Nan)

   - 'perf trace' now supports syscall groups, like strace, i.e:

       $ trace -e file touch file

     Will expand 'file' into multiple, file related, syscalls.  More
     work needed to add extra groups for other syscall groups, and also
     to complement what was added for the 'file' group, included as a
     proof of concept.  (Arnaldo Carvalho de Melo)

   - Add lock_pi stresser to 'perf bench futex', to test the kernel code
     related to FUTEX_(UN)LOCK_PI.  (Davidlohr Bueso)

   - Let user have timestamps with per-thread recording in 'perf record'
     (Adrian Hunter)

   - ... and tons of other changes, see the shortlog and the Git log for
     details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (240 commits)
  perf evlist: Add backpointer for perf_env to evlist
  perf tools: Rename perf_session_env to perf_env
  perf tools: Do not change lib/api/fs/debugfs directly
  perf tools: Add tracing_path and remove unneeded functions
  perf buildid: Introduce sysfs/filename__sprintf_build_id
  perf evsel: Add a backpointer to the evlist a evsel is in
  perf trace: Add header with copyright and background info
  perf scripts python: Add new compaction-times script
  perf stat: Get correct cpu id for print_aggr
  tools lib traceeveent: Allow for negative numbers in print format
  perf script: Add --[no-]-demangle/--[no-]-demangle-kernel
  tracing/uprobes: Do not print '0x (null)' when offset is 0
  perf probe: Support probing at absolute address
  perf probe: Fix error reported when offset without function
  perf probe: Fix list result when address is zero
  perf probe: Fix list result when symbol can't be found
  tools build: Allow duplicate objects in the object list
  perf tools: Remove export.h from MANIFEST
  perf probe: Prevent segfault when reading probe point with absolute address
  perf tools: Update Intel PT documentation
  ...

9 files changed, 961 insertions, 67 deletions

diff --git a/tools/perf/Documentation/intel-bts.txt b/tools/perf/Documentation/intel-bts.txt
new file mode 100644
index 000000000000..8bdc93bd7fdb
--- /dev/null
+++ b/tools/perf/Documentation/intel-bts.txt
@@ -0,0 +1,86 @@
+Intel Branch Trace Store
+========================
+
+Overview
+========
+
+Intel BTS could be regarded as a predecessor to Intel PT and has some
+similarities because it can also identify every branch a program takes.  A
+notable difference is that Intel BTS has no timing information and as a
+consequence the present implementation is limited to per-thread recording.
+
+While decoding Intel BTS does not require walking the object code, the object
+code is still needed to pair up calls and returns correctly, consequently much
+of the Intel PT documentation applies also to Intel BTS.  Refer to the Intel PT
+documentation and consider that the PMU 'intel_bts' can usually be used in
+place of 'intel_pt' in the examples provided, with the proviso that per-thread
+recording must also be stipulated i.e. the --per-thread option for
+'perf record'.
+
+
+perf record
+===========
+
+new event
+---------
+
+The Intel BTS kernel driver creates a new PMU for Intel BTS.  The perf record
+option is:
+
+	-e intel_bts//
+
+Currently Intel BTS is limited to per-thread tracing so the --per-thread option
+is also needed.
+
+
+snapshot option
+---------------
+
+The snapshot option is the same as Intel PT (refer Intel PT documentation).
+
+
+auxtrace mmap size option
+-----------------------
+
+The mmap size option is the same as Intel PT (refer Intel PT documentation).
+
+
+perf script
+===========
+
+By default, perf script will decode trace data found in the perf.data file.
+This can be further controlled by option --itrace.  The --itrace option is
+the same as Intel PT (refer Intel PT documentation) except that neither
+"instructions" events nor "transactions" events (and consequently call
+chains) are supported.
+
+To disable trace decoding entirely, use the option --no-itrace.
+
+
+dump option
+-----------
+
+perf script has an option (-D) to "dump" the events i.e. display the binary
+data.
+
+When -D is used, Intel BTS packets are displayed.
+
+To disable the display of Intel BTS packets, combine the -D option with
+--no-itrace.
+
+
+perf report
+===========
+
+By default, perf report will decode trace data found in the perf.data file.
+This can be further controlled by new option --itrace exactly the same as
+perf script.
+
+
+perf inject
+===========
+
+perf inject also accepts the --itrace option in which case tracing data is
+removed and replaced with the synthesized events. e.g.
+
+	perf inject --itrace -i perf.data -o perf.data.new
diff --git a/tools/perf/Documentation/intel-pt.txt b/tools/perf/Documentation/intel-pt.txt
new file mode 100644
index 000000000000..4a0501d7a3b4
--- /dev/null
+++ b/tools/perf/Documentation/intel-pt.txt
@@ -0,0 +1,766 @@
+Intel Processor Trace
+=====================
+
+Overview
+========
+
+Intel Processor Trace (Intel PT) is an extension of Intel Architecture that
+collects information about software execution such as control flow, execution
+modes and timings and formats it into highly compressed binary packets.
+Technical details are documented in the Intel 64 and IA-32 Architectures
+Software Developer Manuals, Chapter 36 Intel Processor Trace.
+
+Intel PT is first supported in Intel Core M and 5th generation Intel Core
+processors that are based on the Intel micro-architecture code name Broadwell.
+
+Trace data is collected by 'perf record' and stored within the perf.data file.
+See below for options to 'perf record'.
+
+Trace data must be 'decoded' which involves walking the object code and matching
+the trace data packets. For example a TNT packet only tells whether a
+conditional branch was taken or not taken, so to make use of that packet the
+decoder must know precisely which instruction was being executed.
+
+Decoding is done on-the-fly.  The decoder outputs samples in the same format as
+samples output by perf hardware events, for example as though the "instructions"
+or "branches" events had been recorded.  Presently 3 tools support this:
+'perf script', 'perf report' and 'perf inject'.  See below for more information
+on using those tools.
+
+The main distinguishing feature of Intel PT is that the decoder can determine
+the exact flow of software execution.  Intel PT can be used to understand why
+and how did software get to a certain point, or behave a certain way.  The
+software does not have to be recompiled, so Intel PT works with debug or release
+builds, however the executed images are needed - which makes use in JIT-compiled
+environments, or with self-modified code, a challenge.  Also symbols need to be
+provided to make sense of addresses.
+
+A limitation of Intel PT is that it produces huge amounts of trace data
+(hundreds of megabytes per second per core) which takes a long time to decode,
+for example two or three orders of magnitude longer than it took to collect.
+Another limitation is the performance impact of tracing, something that will
+vary depending on the use-case and architecture.
+
+
+Quickstart
+==========
+
+It is important to start small.  That is because it is easy to capture vastly
+more data than can possibly be processed.
+
+The simplest thing to do with Intel PT is userspace profiling of small programs.
+Data is captured with 'perf record' e.g. to trace 'ls' userspace-only:
+
+	perf record -e intel_pt//u ls
+
+And profiled with 'perf report' e.g.
+
+	perf report
+
+To also trace kernel space presents a problem, namely kernel self-modifying
+code.  A fairly good kernel image is available in /proc/kcore but to get an
+accurate image a copy of /proc/kcore needs to be made under the same conditions
+as the data capture.  A script perf-with-kcore can do that, but beware that the
+script makes use of 'sudo' to copy /proc/kcore.  If you have perf installed
+locally from the source tree you can do:
+
+	~/libexec/perf-core/perf-with-kcore record pt_ls -e intel_pt// -- ls
+
+which will create a directory named 'pt_ls' and put the perf.data file and
+copies of /proc/kcore, /proc/kallsyms and /proc/modules into it.  Then to use
+'perf report' becomes:
+
+	~/libexec/perf-core/perf-with-kcore report pt_ls
+
+Because samples are synthesized after-the-fact, the sampling period can be
+selected for reporting. e.g. sample every microsecond
+
+	~/libexec/perf-core/perf-with-kcore report pt_ls --itrace=i1usge
+
+See the sections below for more information about the --itrace option.
+
+Beware the smaller the period, the more samples that are produced, and the
+longer it takes to process them.
+
+Also note that the coarseness of Intel PT timing information will start to
+distort the statistical value of the sampling as the sampling period becomes
+smaller.
+
+To represent software control flow, "branches" samples are produced.  By default
+a branch sample is synthesized for every single branch.  To get an idea what
+data is available you can use the 'perf script' tool with no parameters, which
+will list all the samples.
+
+	perf record -e intel_pt//u ls
+	perf script
+
+An interesting field that is not printed by default is 'flags' which can be
+displayed as follows:
+
+	perf script -Fcomm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,flags
+
+The flags are "bcrosyiABEx" which stand for branch, call, return, conditional,
+system, asynchronous, interrupt, transaction abort, trace begin, trace end, and
+in transaction, respectively.
+
+While it is possible to create scripts to analyze the data, an alternative
+approach is available to export the data to a postgresql database.  Refer to
+script export-to-postgresql.py for more details, and to script
+call-graph-from-postgresql.py for an example of using the database.
+
+As mentioned above, it is easy to capture too much data.  One way to limit the
+data captured is to use 'snapshot' mode which is explained further below.
+Refer to 'new snapshot option' and 'Intel PT modes of operation' further below.
+
+Another problem that will be experienced is decoder errors.  They can be caused
+by inability to access the executed image, self-modified or JIT-ed code, or the
+inability to match side-band information (such as context switches and mmaps)
+which results in the decoder not knowing what code was executed.
+
+There is also the problem of perf not being able to copy the data fast enough,
+resulting in data lost because the buffer was full.  See 'Buffer handling' below
+for more details.
+
+
+perf record
+===========
+
+new event
+---------
+
+The Intel PT kernel driver creates a new PMU for Intel PT.  PMU events are
+selected by providing the PMU name followed by the "config" separated by slashes.
+An enhancement has been made to allow default "config" e.g. the option
+
+	-e intel_pt//
+
+will use a default config value.  Currently that is the same as
+
+	-e intel_pt/tsc,noretcomp=0/
+
+which is the same as
+
+	-e intel_pt/tsc=1,noretcomp=0/
+
+Note there are now new config terms - see section 'config terms' further below.
+
+The config terms are listed in /sys/devices/intel_pt/format.  They are bit
+fields within the config member of the struct perf_event_attr which is
+passed to the kernel by the perf_event_open system call.  They correspond to bit
+fields in the IA32_RTIT_CTL MSR.  Here is a list of them and their definitions:
+
+	$ grep -H . /sys/bus/event_source/devices/intel_pt/format/*
+	/sys/bus/event_source/devices/intel_pt/format/cyc:config:1
+	/sys/bus/event_source/devices/intel_pt/format/cyc_thresh:config:19-22
+	/sys/bus/event_source/devices/intel_pt/format/mtc:config:9
+	/sys/bus/event_source/devices/intel_pt/format/mtc_period:config:14-17
+	/sys/bus/event_source/devices/intel_pt/format/noretcomp:config:11
+	/sys/bus/event_source/devices/intel_pt/format/psb_period:config:24-27
+	/sys/bus/event_source/devices/intel_pt/format/tsc:config:10
+
+Note that the default config must be overridden for each term i.e.
+
+	-e intel_pt/noretcomp=0/
+
+is the same as:
+
+	-e intel_pt/tsc=1,noretcomp=0/
+
+So, to disable TSC packets use:
+
+	-e intel_pt/tsc=0/
+
+It is also possible to specify the config value explicitly:
+
+	-e intel_pt/config=0x400/
+
+Note that, as with all events, the event is suffixed with event modifiers:
+
+	u	userspace
+	k	kernel
+	h	hypervisor
+	G	guest
+	H	host
+	p	precise ip
+
+'h', 'G' and 'H' are for virtualization which is not supported by Intel PT.
+'p' is also not relevant to Intel PT.  So only options 'u' and 'k' are
+meaningful for Intel PT.
+
+perf_event_attr is displayed if the -vv option is used e.g.
+
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             6
+	size                             112
+	config                           0x400
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|CPU|IDENTIFIER
+	read_format                      ID
+	disabled                         1
+	inherit                          1
+	exclude_kernel                   1
+	exclude_hv                       1
+	enable_on_exec                   1
+	sample_id_all                    1
+	------------------------------------------------------------
+	sys_perf_event_open: pid 31104  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 3  group_fd -1  flags 0x8
+	------------------------------------------------------------
+
+
+config terms
+------------
+
+The June 2015 version of Intel 64 and IA-32 Architectures Software Developer
+Manuals, Chapter 36 Intel Processor Trace, defined new Intel PT features.
+Some of the features are reflect in new config terms.  All the config terms are
+described below.
+
+tsc		Always supported.  Produces TSC timestamp packets to provide
+		timing information.  In some cases it is possible to decode
+		without timing information, for example a per-thread context
+		that does not overlap executable memory maps.
+
+		The default config selects tsc (i.e. tsc=1).
+
+noretcomp	Always supported.  Disables "return compression" so a TIP packet
+		is produced when a function returns.  Causes more packets to be
+		produced but might make decoding more reliable.
+
+		The default config does not select noretcomp (i.e. noretcomp=0).
+
+psb_period	Allows the frequency of PSB packets to be specified.
+
+		The PSB packet is a synchronization packet that provides a
+		starting point for decoding or recovery from errors.
+
+		Support for psb_period is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/psb_cyc
+
+		which contains "1" if the feature is supported and "0"
+		otherwise.
+
+		Valid values are given by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/psb_periods
+
+		which contains a hexadecimal value, the bits of which represent
+		valid values e.g. bit 2 set means value 2 is valid.
+
+		The psb_period value is converted to the approximate number of
+		trace bytes between PSB packets as:
+
+			2 ^ (value + 11)
+
+		e.g. value 3 means 16KiB bytes between PSBs
+
+		If an invalid value is entered, the error message
+		will give a list of valid values e.g.
+
+			$ perf record -e intel_pt/psb_period=15/u uname
+			Invalid psb_period for intel_pt. Valid values are: 0-5
+
+		If MTC packets are selected, the default config selects a value
+		of 3 (i.e. psb_period=3) or the nearest lower value that is
+		supported (0 is always supported).  Otherwise the default is 0.
+
+		If decoding is expected to be reliable and the buffer is large
+		then a large PSB period can be used.
+
+		Because a TSC packet is produced with PSB, the PSB period can
+		also affect the granularity to timing information in the absence
+		of MTC or CYC.
+
+mtc		Produces MTC timing packets.
+
+		MTC packets provide finer grain timestamp information than TSC
+		packets.  MTC packets record time using the hardware crystal
+		clock (CTC) which is related to TSC packets using a TMA packet.
+
+		Support for this feature is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/mtc
+
+		which contains "1" if the feature is supported and
+		"0" otherwise.
+
+		The frequency of MTC packets can also be specified - see
+		mtc_period below.
+
+mtc_period	Specifies how frequently MTC packets are produced - see mtc
+		above for how to determine if MTC packets are supported.
+
+		Valid values are given by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/mtc_periods
+
+		which contains a hexadecimal value, the bits of which represent
+		valid values e.g. bit 2 set means value 2 is valid.
+
+		The mtc_period value is converted to the MTC frequency as:
+
+			CTC-frequency / (2 ^ value)
+
+		e.g. value 3 means one eighth of CTC-frequency
+
+		Where CTC is the hardware crystal clock, the frequency of which
+		can be related to TSC via values provided in cpuid leaf 0x15.
+
+		If an invalid value is entered, the error message
+		will give a list of valid values e.g.
+
+			$ perf record -e intel_pt/mtc_period=15/u uname
+			Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9
+
+		The default value is 3 or the nearest lower value
+		that is supported (0 is always supported).
+
+cyc		Produces CYC timing packets.
+
+		CYC packets provide even finer grain timestamp information than
+		MTC and TSC packets.  A CYC packet contains the number of CPU
+		cycles since the last CYC packet. Unlike MTC and TSC packets,
+		CYC packets are only sent when another packet is also sent.
+
+		Support for this feature is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/psb_cyc
+
+		which contains "1" if the feature is supported and
+		"0" otherwise.
+
+		The number of CYC packets produced can be reduced by specifying
+		a threshold - see cyc_thresh below.
+
+cyc_thresh	Specifies how frequently CYC packets are produced - see cyc
+		above for how to determine if CYC packets are supported.
+
+		Valid cyc_thresh values are given by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds
+
+		which contains a hexadecimal value, the bits of which represent
+		valid values e.g. bit 2 set means value 2 is valid.
+
+		The cyc_thresh value represents the minimum number of CPU cycles
+		that must have passed before a CYC packet can be sent.  The
+		number of CPU cycles is:
+
+			2 ^ (value - 1)
+
+		e.g. value 4 means 8 CPU cycles must pass before a CYC packet
+		can be sent.  Note a CYC packet is still only sent when another
+		packet is sent, not at, e.g. every 8 CPU cycles.
+
+		If an invalid value is entered, the error message
+		will give a list of valid values e.g.
+
+			$ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
+			Invalid cyc_thresh for intel_pt. Valid values are: 0-12
+
+		CYC packets are not requested by default.
+
+no_force_psb	This is a driver option and is not in the IA32_RTIT_CTL MSR.
+
+		It stops the driver resetting the byte count to zero whenever
+		enabling the trace (for example on context switches) which in
+		turn results in no PSB being forced.  However some processors
+		will produce a PSB anyway.
+
+		In any case, there is still a PSB when the trace is enabled for
+		the first time.
+
+		no_force_psb can be used to slightly decrease the trace size but
+		may make it harder for the decoder to recover from errors.
+
+		no_force_psb is not selected by default.
+
+
+new snapshot option
+-------------------
+
+The difference between full trace and snapshot from the kernel's perspective is
+that in full trace we don't overwrite trace data that the user hasn't collected
+yet (and indicated that by advancing aux_tail), whereas in snapshot mode we let
+the trace run and overwrite older data in the buffer so that whenever something
+interesting happens, we can stop it and grab a snapshot of what was going on
+around that interesting moment.
+
+To select snapshot mode a new option has been added:
+
+	-S
+
+Optionally it can be followed by the snapshot size e.g.
+
+	-S0x100000
+
+The default snapshot size is the auxtrace mmap size.  If neither auxtrace mmap size
+nor snapshot size is specified, then the default is 4MiB for privileged users
+(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users.
+If an unprivileged user does not specify mmap pages, the mmap pages will be
+reduced as described in the 'new auxtrace mmap size option' section below.
+
+The snapshot size is displayed if the option -vv is used e.g.
+
+	Intel PT snapshot size: %zu
+
+
+new auxtrace mmap size option
+---------------------------
+
+Intel PT buffer size is specified by an addition to the -m option e.g.
+
+	-m,16
+
+selects a buffer size of 16 pages i.e. 64KiB.
+
+Note that the existing functionality of -m is unchanged.  The auxtrace mmap size
+is specified by the optional addition of a comma and the value.
+
+The default auxtrace mmap size for Intel PT is 4MiB/page_size for privileged users
+(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users.
+If an unprivileged user does not specify mmap pages, the mmap pages will be
+reduced from the default 512KiB/page_size to 256KiB/page_size, otherwise the
+user is likely to get an error as they exceed their mlock limit (Max locked
+memory as shown in /proc/self/limits).  Note that perf does not count the first
+512KiB (actually /proc/sys/kernel/perf_event_mlock_kb minus 1 page) per cpu
+against the mlock limit so an unprivileged user is allowed 512KiB per cpu plus
+their mlock limit (which defaults to 64KiB but is not multiplied by the number
+of cpus).
+
+In full-trace mode, powers of two are allowed for buffer size, with a minimum
+size of 2 pages.  In snapshot mode, it is the same but the minimum size is
+1 page.
+
+The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
+
+	mmap length 528384
+	auxtrace mmap length 4198400
+
+
+Intel PT modes of operation
+---------------------------
+
+Intel PT can be used in 2 modes:
+	full-trace mode
+	snapshot mode
+
+Full-trace mode traces continuously e.g.
+
+	perf record -e intel_pt//u uname
+
+Snapshot mode captures the available data when a signal is sent e.g.
+
+	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
+	[1] 11435
+	kill -USR2 11435
+	Recording AUX area tracing snapshot
+
+Note that the signal sent is SIGUSR2.
+Note that "Recording AUX area tracing snapshot" is displayed because the -v
+option is used.
+
+The 2 modes cannot be used together.
+
+
+Buffer handling
+---------------
+
+There may be buffer limitations (i.e. single ToPa entry) which means that actual
+buffer sizes are limited to powers of 2 up to 4MiB (MAX_ORDER).  In order to
+provide other sizes, and in particular an arbitrarily large size, multiple
+buffers are logically concatenated.  However an interrupt must be used to switch
+between buffers.  That has two potential problems:
+	a) the interrupt may not be handled in time so that the current buffer
+	becomes full and some trace data is lost.
+	b) the interrupts may slow the system and affect the performance
+	results.
+
+If trace data is lost, the driver sets 'truncated' in the PERF_RECORD_AUX event
+which the tools report as an error.
+
+In full-trace mode, the driver waits for data to be copied out before allowing
+the (logical) buffer to wrap-around.  If data is not copied out quickly enough,
+again 'truncated' is set in the PERF_RECORD_AUX event.  If the driver has to
+wait, the intel_pt event gets disabled.  Because it is difficult to know when
+that happens, perf tools always re-enable the intel_pt event after copying out
+data.
+
+
+Intel PT and build ids
+----------------------
+
+By default "perf record" post-processes the event stream to find all build ids
+for executables for all addresses sampled.  Deliberately, Intel PT is not
+decoded for that purpose (it would take too long).  Instead the build ids for
+all executables encountered (due to mmap, comm or task events) are included
+in the perf.data file.
+
+To see buildids included in the perf.data file use the command:
+
+	perf buildid-list
+
+If the perf.data file contains Intel PT data, that is the same as:
+
+	perf buildid-list --with-hits
+
+
+Snapshot mode and event disabling
+---------------------------------
+
+In order to make a snapshot, the intel_pt event is disabled using an IOCTL,
+namely PERF_EVENT_IOC_DISABLE.  However doing that can also disable the
+collection of side-band information.  In order to prevent that,  a dummy
+software event has been introduced that permits tracking events (like mmaps) to
+continue to be recorded while intel_pt is disabled.  That is important to ensure
+there is complete side-band information to allow the decoding of subsequent
+snapshots.
+
+A test has been created for that.  To find the test:
+
+	perf test list
+	...
+	23: Test using a dummy software event to keep tracking
+
+To run the test:
+
+	perf test 23
+	23: Test using a dummy software event to keep tracking     : Ok
+
+
+perf record modes (nothing new here)
+------------------------------------
+
+perf record essentially operates in one of three modes:
+	per thread
+	per cpu
+	workload only
+
+"per thread" mode is selected by -t or by --per-thread (with -p or -u or just a
+workload).
+"per cpu" is selected by -C or -a.
+"workload only" mode is selected by not using the other options but providing a
+command to run (i.e. the workload).
+
+In per-thread mode an exact list of threads is traced.  There is no inheritance.
+Each thread has its own event buffer.
+
+In per-cpu mode all processes (or processes from the selected cgroup i.e. -G
+option, or processes selected with -p or -u) are traced.  Each cpu has its own
+buffer. Inheritance is allowed.
+
+In workload-only mode, the workload is traced but with per-cpu buffers.
+Inheritance is allowed.  Note that you can now trace a workload in per-thread
+mode by using the --per-thread option.
+
+
+Privileged vs non-privileged users
+----------------------------------
+
+Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users
+have memory limits imposed upon them.  That affects what buffer sizes they can
+have as outlined above.
+
+Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users are
+not permitted to use tracepoints which means there is insufficient side-band
+information to decode Intel PT in per-cpu mode, and potentially workload-only
+mode too if the workload creates new processes.
+
+Note also, that to use tracepoints, read-access to debugfs is required.  So if
+debugfs is not mounted or the user does not have read-access, it will again not
+be possible to decode Intel PT in per-cpu mode.
+
+
+sched_switch tracepoint
+-----------------------
+
+The sched_switch tracepoint is used to provide side-band data for Intel PT
+decoding.  sched_switch events are automatically added. e.g. the second event
+shown below
+
+	$ perf record -vv -e intel_pt//u uname
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             6
+	size                             112
+	config                           0x400
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|CPU|IDENTIFIER
+	read_format                      ID
+	disabled                         1
+	inherit                          1
+	exclude_kernel                   1
+	exclude_hv                       1
+	enable_on_exec                   1
+	sample_id_all                    1
+	------------------------------------------------------------
+	sys_perf_event_open: pid 31104  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 3  group_fd -1  flags 0x8
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             2
+	size                             112
+	config                           0x108
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
+	read_format                      ID
+	inherit                          1
+	sample_id_all                    1
+	exclude_guest                    1
+	------------------------------------------------------------
+	sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8
+	------------------------------------------------------------
+	perf_event_attr:
+	type                             1
+	size                             112
+	config                           0x9
+	{ sample_period, sample_freq }   1
+	sample_type                      IP|TID|TIME|IDENTIFIER
+	read_format                      ID
+	disabled                         1
+	inherit                          1
+	exclude_kernel                   1
+	exclude_hv                       1
+	mmap                             1
+	comm                             1
+	enable_on_exec                   1
+	task                             1
+	sample_id_all                    1
+	mmap2                            1
+	comm_exec                        1
+	------------------------------------------------------------
+	sys_perf_event_open: pid 31104  cpu 0  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 1  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 2  group_fd -1  flags 0x8
+	sys_perf_event_open: pid 31104  cpu 3  group_fd -1  flags 0x8
+	mmap size 528384B
+	AUX area mmap length 4194304
+	perf event ring buffer mmapped per cpu
+	Synthesizing auxtrace information
+	Linux
+	[ perf record: Woken up 1 times to write data ]
+	[ perf record: Captured and wrote 0.042 MB perf.data ]
+
+Note, the sched_switch event is only added if the user is permitted to use it
+and only in per-cpu mode.
+
+Note also, the sched_switch event is only added if TSC packets are requested.
+That is because, in the absence of timing information, the sched_switch events
+cannot be matched against the Intel PT trace.
+
+
+perf script
+===========
+
+By default, perf script will decode trace data found in the perf.data file.
+This can be further controlled by new option --itrace.
+
+
+New --itrace option
+-------------------
+
+Having no option is the same as
+
+	--itrace
+
+which, in turn, is the same as
+
+	--itrace=ibxe
+
+The letters are:
+
+	i	synthesize "instructions" events
+	b	synthesize "branches" events
+	x	synthesize "transactions" events
+	c	synthesize branches events (calls only)
+	r	synthesize branches events (returns only)
+	e	synthesize tracing error events
+	d	create a debug log
+	g	synthesize a call chain (use with i or x)
+
+"Instructions" events look like they were recorded by "perf record -e
+instructions".
+
+"Branches" events look like they were recorded by "perf record -e branches". "c"
+and "r" can be combined to get calls and returns.
+
+"Transactions" events correspond to the start or end of transactions. The
+'flags' field can be used in perf script to determine whether the event is a
+tranasaction start, commit or abort.
+
+Error events are new.  They show where the decoder lost the trace.  Error events
+are quite important.  Users must know if what they are seeing is a complete
+picture or not.
+
+The "d" option will cause the creation of a file "intel_pt.log" containing all
+decoded packets and instructions.  Note that this option slows down the decoder
+and that the resulting file may be very large.
+
+In addition, the period of the "instructions" event can be specified. e.g.
+
+	--itrace=i10us
+
+sets the period to 10us i.e. one  instruction sample is synthesized for each 10
+microseconds of trace.  Alternatives to "us" are "ms" (milliseconds),
+"ns" (nanoseconds), "t" (TSC ticks) or "i" (instructions).
+
+"ms", "us" and "ns" are converted to TSC ticks.
+
+The timing information included with Intel PT does not give the time of every
+instruction.  Consequently, for the purpose of sampling, the decoder estimates
+the time since the last timing packet based on 1 tick per instruction.  The time
+on the sample is *not* adjusted and reflects the last known value of TSC.
+
+For Intel PT, the default period is 100us.
+
+Also the call chain size (default 16, max. 1024) for instructions or
+transactions events can be specified. e.g.
+
+	--itrace=ig32
+	--itrace=xg32
+
+To disable trace decoding entirely, use the option --no-itrace.
+
+
+dump option
+-----------
+
+perf script has an option (-D) to "dump" the events i.e. display the binary
+data.
+
+When -D is used, Intel PT packets are displayed.  The packet decoder does not
+pay attention to PSB packets, but just decodes the bytes - so the packets seen
+by the actual decoder may not be identical in places where the data is corrupt.
+One example of that would be when the buffer-switching interrupt has been too
+slow, and the buffer has been filled completely.  In that case, the last packet
+in the buffer might be truncated and immediately followed by a PSB as the trace
+continues in the next buffer.
+
+To disable the display of Intel PT packets, combine the -D option with
+--no-itrace.
+
+
+perf report
+===========
+
+By default, perf report will decode trace data found in the perf.data file.
+This can be further controlled by new option --itrace exactly the same as
+perf script, with the exception that the default is --itrace=igxe.
+
+
+perf inject
+===========
+
+perf inject also accepts the --itrace option in which case tracing data is
+removed and replaced with the synthesized events. e.g.
+
+	perf inject --itrace -i perf.data -o perf.data.new
diff --git a/tools/perf/Documentation/itrace.txt b/tools/perf/Documentation/itrace.txt
new file mode 100644
index 000000000000..2ff946677e3b
--- /dev/null
+++ b/tools/perf/Documentation/itrace.txt
@@ -0,0 +1,22 @@
+		i	synthesize instructions events
+		b	synthesize branches events
+		c	synthesize branches events (calls only)
+		r	synthesize branches events (returns only)
+		x	synthesize transactions events
+		e	synthesize error events
+		d	create a debug log
+		g	synthesize a call chain (use with i or x)
+
+	The default is all events i.e. the same as --itrace=ibxe
+
+	In addition, the period (default 100000) for instructions events
+	can be specified in units of:
+
+		i	instructions
+		t	ticks
+		ms	milliseconds
+		us	microseconds
+		ns	nanoseconds (default)
+
+	Also the call chain size (default 16, max. 1024) for instructions or
+	transactions events can be specified.
diff --git a/tools/perf/Documentation/perf-bench.txt b/tools/perf/Documentation/perf-bench.txt
index bf3d0644bf10..ab632d9fbd7d 100644
--- a/tools/perf/Documentation/perf-bench.txt
+++ b/tools/perf/Documentation/perf-bench.txt
@@ -216,6 +216,10 @@ Suite for evaluating parallel wake calls.
 *requeue*::
 Suite for evaluating requeue calls.
 
+*lock-pi*::
+Suite for evaluating futex lock_pi calls.
+
+
 SEE ALSO
 --------
 linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-inject.txt b/tools/perf/Documentation/perf-inject.txt
index b876ae312699..0c721c3e37e1 100644
--- a/tools/perf/Documentation/perf-inject.txt
+++ b/tools/perf/Documentation/perf-inject.txt
@@ -48,28 +48,7 @@ OPTIONS
 	Decode Instruction Tracing data, replacing it with synthesized events.
 	Options are:
 
-		i	synthesize instructions events
-		b	synthesize branches events
-		c	synthesize branches events (calls only)
-		r	synthesize branches events (returns only)
-		x	synthesize transactions events
-		e	synthesize error events
-		d	create a debug log
-		g	synthesize a call chain (use with i or x)
-
-	The default is all events i.e. the same as --itrace=ibxe
-
-	In addition, the period (default 100000) for instructions events
-	can be specified in units of:
-
-		i	instructions
-		t	ticks
-		ms	milliseconds
-		us	microseconds
-		ns	nanoseconds (default)
-
-	Also the call chain size (default 16, max. 1024) for instructions or
-	transactions events can be specified.
+include::itrace.txt[]
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 9b9d9d086680..347a27322ed8 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -45,6 +45,21 @@ OPTIONS
           param1 and param2 are defined as formats for the PMU in:
           /sys/bus/event_sources/devices/<pmu>/format/*
 
+	  There are also some params which are not defined in .../<pmu>/format/*.
+	  These params can be used to overload default config values per event.
+	  Here is a list of the params.
+	  - 'period': Set event sampling period
+	  - 'freq': Set event sampling frequency
+	  - 'time': Disable/enable time stamping. Acceptable values are 1 for
+		    enabling time stamping. 0 for disabling time stamping.
+		    The default is 1.
+	  - 'call-graph': Disable/enable callgraph. Acceptable str are "fp" for
+			 FP mode, "dwarf" for DWARF mode, "lbr" for LBR mode and
+			 "no" for disable callgraph.
+	  - 'stack-size': user stack size for dwarf mode
+	  Note: If user explicitly sets options which conflict with the params,
+	  the value set by the params will be overridden.
+
         - a hardware breakpoint event in the form of '\mem:addr[/len][:access]'
           where addr is the address in memory you want to break in.
           Access is the memory access type (read, write, execute) it can
@@ -61,7 +76,16 @@ OPTIONS
 	  "perf report" to view group events together.
 
 --filter=<filter>::
-        Event filter.
+        Event filter. This option should follow a event selector (-e) which
+	selects tracepoint event(s). Multiple '--filter' options are combined
+	using '&&'.
+
+--exclude-perf::
+	Don't record events issued by perf itself. This option should follow
+	a event selector (-e) which selects tracepoint event(s). It adds a
+	filter expression 'common_pid != $PERFPID' to filters. If other
+	'--filter' exists, the new filter expression will be combined with
+	them by '&&'.
 
 -a::
 --all-cpus::
@@ -276,6 +300,10 @@ When processing pre-existing threads /proc/XXX/mmap, it may take a long time,
 because the file may be huge. A time out is needed in such cases.
 This option sets the time out limit. The default value is 500 ms.
 
+--switch-events::
+Record context switch events i.e. events of type PERF_RECORD_SWITCH or
+PERF_RECORD_SWITCH_CPU_WIDE.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index c33b69f3374f..9c7981bfddad 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -81,6 +81,8 @@ OPTIONS
 	- cpu: cpu number the task ran at the time of sample
 	- srcline: filename and line number executed at the time of sample.  The
 	DWARF debugging info must be provided.
+	- srcfile: file name of the source file of the same. Requires dwarf
+	information.
 	- weight: Event specific weight, e.g. memory latency or transaction
 	abort cost. This is the global weight.
 	- local_weight: Local weight version of the weight above.
@@ -109,6 +111,7 @@ OPTIONS
 	- mispredict: "N" for predicted branch, "Y" for mispredicted branch
 	- in_tx: branch in TSX transaction
 	- abort: TSX transaction abort.
+	- cycles: Cycles in basic block
 
 	And default sort keys are changed to comm, dso_from, symbol_from, dso_to
 	and symbol_to, see '--branch-stack'.
@@ -328,31 +331,23 @@ OPTIONS
 --itrace::
 	Options for decoding instruction tracing data. The options are:
 
-		i	synthesize instructions events
-		b	synthesize branches events
-		c	synthesize branches events (calls only)
-		r	synthesize branches events (returns only)
-		x	synthesize transactions events
-		e	synthesize error events
-		d	create a debug log
-		g	synthesize a call chain (use with i or x)
-
-	The default is all events i.e. the same as --itrace=ibxe
-
-	In addition, the period (default 100000) for instructions events
-	can be specified in units of:
-
-		i	instructions
-		t	ticks
-		ms	milliseconds
-		us	microseconds
-		ns	nanoseconds (default)
-
-	Also the call chain size (default 16, max. 1024) for instructions or
-	transactions events can be specified.
+include::itrace.txt[]
 
 	To disable decoding entirely, use --no-itrace.
 
+--full-source-path::
+	Show the full path for source files for srcline output.
+
+--show-ref-call-graph::
+	When multiple events are sampled, it may not be needed to collect
+	callgraphs for all of them. The sample sites are usually nearby,
+	and it's enough to collect the callgraphs on a reference event.
+	So user can use "call-graph=no" event modifier to disable callgraph
+	for other events to reduce the overhead.
+	However, perf report cannot show callgraphs for the event which
+	disable the callgraph.
+	This option extends the perf report to show reference callgraphs,
+	which collected by reference event, in no callgraph event.
 
 include::callchain-overhead-calculation.txt[]
 
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index c82df572fac2..614b2c7b0293 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -222,6 +222,17 @@ OPTIONS
 --show-mmap-events
 	Display mmap related events (e.g. MMAP, MMAP2).
 
+--show-switch-events
+	Display context switch events i.e. events of type PERF_RECORD_SWITCH or
+	PERF_RECORD_SWITCH_CPU_WIDE.
+
+--demangle::
+	Demangle symbol names to human readable form. It's enabled by default,
+	disable with --no-demangle.
+
+--demangle-kernel::
+	Demangle kernel symbol names to human readable form (for C++ kernels).
+
 --header
 	Show perf.data header.
 
@@ -231,31 +242,13 @@ OPTIONS
 --itrace::
 	Options for decoding instruction tracing data. The options are:
 
-		i	synthesize instructions events
-		b	synthesize branches events
-		c	synthesize branches events (calls only)
-		r	synthesize branches events (returns only)
-		x	synthesize transactions events
-		e	synthesize error events
-		d	create a debug log
-		g	synthesize a call chain (use with i or x)
-
-	The default is all events i.e. the same as --itrace=ibxe
-
-	In addition, the period (default 100000) for instructions events
-	can be specified in units of:
-
-		i	instructions
-		t	ticks
-		ms	milliseconds
-		us	microseconds
-		ns	nanoseconds (default)
-
-	Also the call chain size (default 16, max. 1024) for instructions or
-	transactions events can be specified.
+include::itrace.txt[]
 
 	To disable decoding entirely, use --no-itrace.
 
+--full-source-path::
+	Show the full path for source files for srcline output.
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-script-perl[1],
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 776aec4d0927..f6a23eb294e7 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -208,6 +208,27 @@ Default is to monitor all CPUS.
 	This option sets the time out limit. The default value is 500 ms.
 
 
+-b::
+--branch-any::
+	Enable taken branch stack sampling. Any type of taken branch may be sampled.
+	This is a shortcut for --branch-filter any. See --branch-filter for more infos.
+
+-j::
+--branch-filter::
+	Enable taken branch stack sampling. Each sample captures a series of consecutive
+	taken branches. The number of branches captured with each sample depends on the
+	underlying hardware, the type of branches of interest, and the executed code.
+	It is possible to select the types of branches captured by enabling filters.
+	For a full list of modifiers please see the perf record manpage.
+
+	The option requires at least one branch type among any, any_call, any_ret, ind_call, cond.
+	The privilege levels may be omitted, in which case, the privilege levels of the associated
+	event are applied to the branch filter. Both kernel (k) and hypervisor (hv) privilege
+	levels are subject to permissions.  When sampling on multiple events, branch stack sampling
+	is enabled for all the sampling events. The sampled branch type is the same for all events.
+	The various filters must be specified as a comma separated list: --branch-filter any_ret,u,k
+	Note that this feature may not be available on all processors.
+
 INTERACTIVE PROMPTING KEYS
 --------------------------