ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats

Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.

In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.

In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.

In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel

Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.

Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 57 insertions, 14 deletions

diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index 645252789cfe..1bea4bab958b 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -1584,6 +1584,55 @@ bool sof_ipc4_copier_is_single_bitdepth(struct snd_sof_dev *sdev,
 }
 
 static int
+sof_ipc4_adjust_params_to_dai_format(struct snd_sof_dev *sdev,
+				     struct snd_pcm_hw_params *params,
+				     struct sof_ipc4_pin_format *pin_fmts,
+				     u32 pin_fmts_size)
+{
+	u32 params_mask = BIT(SNDRV_PCM_HW_PARAM_RATE) |
+			  BIT(SNDRV_PCM_HW_PARAM_CHANNELS) |
+			  BIT(SNDRV_PCM_HW_PARAM_FORMAT);
+	struct sof_ipc4_audio_format *fmt;
+	u32 rate, channels, valid_bits;
+	int i;
+
+	fmt = &pin_fmts[0].audio_fmt;
+	rate = fmt->sampling_frequency;
+	channels = SOF_IPC4_AUDIO_FORMAT_CFG_CHANNELS_COUNT(fmt->fmt_cfg);
+	valid_bits = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(fmt->fmt_cfg);
+
+	/* check if parameters in topology defined formats are the same */
+	for (i = 1; i < pin_fmts_size; i++) {
+		u32 val;
+
+		fmt = &pin_fmts[i].audio_fmt;
+
+		if (params_mask & BIT(SNDRV_PCM_HW_PARAM_RATE)) {
+			val = fmt->sampling_frequency;
+			if (val != rate)
+				params_mask &= ~BIT(SNDRV_PCM_HW_PARAM_RATE);
+		}
+		if (params_mask & BIT(SNDRV_PCM_HW_PARAM_CHANNELS)) {
+			val = SOF_IPC4_AUDIO_FORMAT_CFG_CHANNELS_COUNT(fmt->fmt_cfg);
+			if (val != channels)
+				params_mask &= ~BIT(SNDRV_PCM_HW_PARAM_CHANNELS);
+		}
+		if (params_mask & BIT(SNDRV_PCM_HW_PARAM_FORMAT)) {
+			val = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(fmt->fmt_cfg);
+			if (val != valid_bits)
+				params_mask &= ~BIT(SNDRV_PCM_HW_PARAM_FORMAT);
+		}
+	}
+
+	if (params_mask)
+		return sof_ipc4_update_hw_params(sdev, params,
+						 &pin_fmts[0].audio_fmt,
+						 params_mask);
+
+	return 0;
+}
+
+static int
 sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai,
 			    struct snd_pcm_hw_params *params, int dir)
 {
@@ -1601,10 +1650,9 @@ sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai,
 	available_fmt = &ipc4_copier->available_fmt;
 
 	/*
-	 * If the copier on the DAI side supports only single bit depth then
-	 * this depth (format) should be used to look for the NHLT blob (if
-	 * needed) and in case of capture this should be used for the input
-	 * format lookup
+	 * Fixup the params based on the format parameters of the DAI. If any
+	 * of the RATE, CHANNELS, bit depth is static among the formats then
+	 * narrow the params to only allow that specific parameter value.
 	 */
 	if (dir == SNDRV_PCM_STREAM_PLAYBACK) {
 		pin_fmts = available_fmt->output_pin_fmts;
@@ -1614,18 +1662,13 @@ sof_ipc4_prepare_dai_copier(struct snd_sof_dev *sdev, struct snd_sof_dai *dai,
 		num_pin_fmts = available_fmt->num_input_formats;
 	}
 
+	ret = sof_ipc4_adjust_params_to_dai_format(sdev, &dai_params, pin_fmts,
+						   num_pin_fmts);
+	if (ret)
+		return ret;
+
 	single_bitdepth = sof_ipc4_copier_is_single_bitdepth(sdev, pin_fmts,
 							     num_pin_fmts);
-
-	/* Update the dai_params with the only supported format */
-	if (single_bitdepth) {
-		ret = sof_ipc4_update_hw_params(sdev, &dai_params,
-						&pin_fmts[0].audio_fmt,
-						BIT(SNDRV_PCM_HW_PARAM_FORMAT));
-		if (ret)
-			return ret;
-	}
-
 	ret = snd_sof_get_nhlt_endpoint_data(sdev, dai, single_bitdepth,
 					     &dai_params,
 					     ipc4_copier->dai_index,