Merge tag 'sound-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Here is the first batch of updates for sound system on 4.4-rc1.

  Again at this time, the update looks fairly calm; no big changes in
  either ALSA core or ASoC infrastructures, rather all small cleanups,
  in addition to the new stuff as usual.

  The biggest changes are about Firewire sound devices.  It gained lots
  of new device support, and MIDI functionality.  Also there are updates
  for a few still working-in-progress stuff (topology API and ASoC
  skylake), too.  But overall, this update should give no big surprise.

  Some highlights are below:

  Core:
   - A few more Kconfig items for tinification; it's marked as EXPERT,
     so normal user should't be bothered :)
   - Refactoring with a new PCM hw_constraint helper
   - Removal of unused transfer_ack_{begin,end} PCM callbacks

  Firewire:
   - Restructuring of code subtree, lots of refactoring
   - Support AMDTP variants
   - New driver for Digidesign 002/003 family
   - Adds support for TASCAM FireOne to ALSA OXFW driver
   - Add MIDI support to TASCAM and Digi00x devices

  HD-Audio:
   - Automated modalias generation for codec drivers, finally
   - Improvement on heuristics for setting mixer name
   - A few fixes for longstanding bugs on Creative CA0132 cards
   - Addition of audio rate callback with i915 communication
   - Fix suspend issue on recent Dell XPS
   - Intel Lewisburg controller support

  ASoC:
   - Updates to the topology userspace interface
   - Big updates to the Renesas support (rcar)
   - More updates for supporting Intel Sky Lake systems
   - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10,
     Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825, Rockchip
     S/PDIF, and Atmel class D amplifier

  USB-Audio:
   - A fix for newer Roland MIDI devices
   - Quirks and workarounds for Zoom R16/24 device

  Misc:
   - A few fixes for some old Cirrus CS46xx PCI sound boards
   - Yet another fixes for some old ESS Maestro3 PCI sound boards"

* tag 'sound-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (330 commits)
  ALSA: hda - Add Intel Lewisburg device IDs Audio
  ALSA: hda - Apply pin fixup for HP ProBook 6550b
  ALSA: hda - Fix lost 4k BDL boundary workaround
  ALSA: maestro3: Fix Allegro mute until master volume/mute is touched
  ALSA: maestro3: Enable docking support for Dell Latitude C810
  ALSA: firewire-digi00x: add another rawmidi character device for MIDI control ports
  ALSA: firewire-digi00x: add MIDI operations for MIDI control port
  ALSA: firewire-digi00x: rename identifiers of MIDI operation for physical ports
  ALSA: cs46xx: Fix suspend for all channels
  ALSA: cs46xx: Fix Duplicate front for CS4294 and CS4298 codecs
  ALSA: DocBook: Add soc-ops.c and soc-compress.c
  ALSA: hda - Add / fix kernel doc comments
  ALSA: Constify ratden/ratnum constraints
  ALSA: hda - Disable 64bit address for Creative HDA controllers
  ALSA: hda/realtek - Dell XPS one ALC3260 speaker no sound after resume back
  ALSA: hda/ca0132 - Convert leftover pr_info() and pr_err()
  ASoC: fsl: Use #ifdef instead of #if for CONFIG_PM_SLEEP
  ASoC: rt5645: Sort the order for register bit defines
  ASoC: dwc: add check for master/slave format
  ASoC: rt5645: Add the HWEQ for the speaker output
  ...

1 files changed, 1252 insertions, 0 deletions

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
new file mode 100644
index 000000000000..a7854c8fc523
--- /dev/null
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -0,0 +1,1252 @@
+/*
+ *  skl-topology.c - Implements Platform component ALSA controls/widget
+ *  handlers.
+ *
+ *  Copyright (C) 2014-2015 Intel Corp
+ *  Author: Jeeja KP <jeeja.kp@intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/firmware.h>
+#include <sound/soc.h>
+#include <sound/soc-topology.h>
+#include "skl-sst-dsp.h"
+#include "skl-sst-ipc.h"
+#include "skl-topology.h"
+#include "skl.h"
+#include "skl-tplg-interface.h"
+
+#define SKL_CH_FIXUP_MASK		(1 << 0)
+#define SKL_RATE_FIXUP_MASK		(1 << 1)
+#define SKL_FMT_FIXUP_MASK		(1 << 2)
+
+/*
+ * SKL DSP driver modelling uses only few DAPM widgets so for rest we will
+ * ignore. This helpers checks if the SKL driver handles this widget type
+ */
+static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w)
+{
+	switch (w->id) {
+	case snd_soc_dapm_dai_link:
+	case snd_soc_dapm_dai_in:
+	case snd_soc_dapm_aif_in:
+	case snd_soc_dapm_aif_out:
+	case snd_soc_dapm_dai_out:
+	case snd_soc_dapm_switch:
+		return false;
+	default:
+		return true;
+	}
+}
+
+/*
+ * Each pipelines needs memory to be allocated. Check if we have free memory
+ * from available pool. Then only add this to pool
+ * This is freed when pipe is deleted
+ * Note: DSP does actual memory management we only keep track for complete
+ * pool
+ */
+static bool skl_tplg_alloc_pipe_mem(struct skl *skl,
+				struct skl_module_cfg *mconfig)
+{
+	struct skl_sst *ctx = skl->skl_sst;
+
+	if (skl->resource.mem + mconfig->pipe->memory_pages >
+				skl->resource.max_mem) {
+		dev_err(ctx->dev,
+				"%s: module_id %d instance %d\n", __func__,
+				mconfig->id.module_id,
+				mconfig->id.instance_id);
+		dev_err(ctx->dev,
+				"exceeds ppl memory available %d mem %d\n",
+				skl->resource.max_mem, skl->resource.mem);
+		return false;
+	}
+
+	skl->resource.mem += mconfig->pipe->memory_pages;
+	return true;
+}
+
+/*
+ * Pipeline needs needs DSP CPU resources for computation, this is
+ * quantified in MCPS (Million Clocks Per Second) required for module/pipe
+ *
+ * Each pipelines needs mcps to be allocated. Check if we have mcps for this
+ * pipe. This adds the mcps to driver counter
+ * This is removed on pipeline delete
+ */
+static bool skl_tplg_alloc_pipe_mcps(struct skl *skl,
+				struct skl_module_cfg *mconfig)
+{
+	struct skl_sst *ctx = skl->skl_sst;
+
+	if (skl->resource.mcps + mconfig->mcps > skl->resource.max_mcps) {
+		dev_err(ctx->dev,
+			"%s: module_id %d instance %d\n", __func__,
+			mconfig->id.module_id, mconfig->id.instance_id);
+		dev_err(ctx->dev,
+			"exceeds ppl memory available %d > mem %d\n",
+			skl->resource.max_mcps, skl->resource.mcps);
+		return false;
+	}
+
+	skl->resource.mcps += mconfig->mcps;
+	return true;
+}
+
+/*
+ * Free the mcps when tearing down
+ */
+static void
+skl_tplg_free_pipe_mcps(struct skl *skl, struct skl_module_cfg *mconfig)
+{
+	skl->resource.mcps -= mconfig->mcps;
+}
+
+/*
+ * Free the memory when tearing down
+ */
+static void
+skl_tplg_free_pipe_mem(struct skl *skl, struct skl_module_cfg *mconfig)
+{
+	skl->resource.mem -= mconfig->pipe->memory_pages;
+}
+
+
+static void skl_dump_mconfig(struct skl_sst *ctx,
+					struct skl_module_cfg *mcfg)
+{
+	dev_dbg(ctx->dev, "Dumping config\n");
+	dev_dbg(ctx->dev, "Input Format:\n");
+	dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt.channels);
+	dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt.s_freq);
+	dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt.ch_cfg);
+	dev_dbg(ctx->dev, "valid bit depth = %d\n",
+			mcfg->in_fmt.valid_bit_depth);
+	dev_dbg(ctx->dev, "Output Format:\n");
+	dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt.channels);
+	dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt.s_freq);
+	dev_dbg(ctx->dev, "valid bit depth = %d\n",
+			mcfg->out_fmt.valid_bit_depth);
+	dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt.ch_cfg);
+}
+
+static void skl_tplg_update_params(struct skl_module_fmt *fmt,
+			struct skl_pipe_params *params, int fixup)
+{
+	if (fixup & SKL_RATE_FIXUP_MASK)
+		fmt->s_freq = params->s_freq;
+	if (fixup & SKL_CH_FIXUP_MASK)
+		fmt->channels = params->ch;
+	if (fixup & SKL_FMT_FIXUP_MASK)
+		fmt->valid_bit_depth = params->s_fmt;
+}
+
+/*
+ * A pipeline may have modules which impact the pcm parameters, like SRC,
+ * channel converter, format converter.
+ * We need to calculate the output params by applying the 'fixup'
+ * Topology will tell driver which type of fixup is to be applied by
+ * supplying the fixup mask, so based on that we calculate the output
+ *
+ * Now In FE the pcm hw_params is source/target format. Same is applicable
+ * for BE with its hw_params invoked.
+ * here based on FE, BE pipeline and direction we calculate the input and
+ * outfix and then apply that for a module
+ */
+static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg,
+		struct skl_pipe_params *params, bool is_fe)
+{
+	int in_fixup, out_fixup;
+	struct skl_module_fmt *in_fmt, *out_fmt;
+
+	in_fmt = &m_cfg->in_fmt;
+	out_fmt = &m_cfg->out_fmt;
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (is_fe) {
+			in_fixup = m_cfg->params_fixup;
+			out_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		} else {
+			out_fixup = m_cfg->params_fixup;
+			in_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		}
+	} else {
+		if (is_fe) {
+			out_fixup = m_cfg->params_fixup;
+			in_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		} else {
+			in_fixup = m_cfg->params_fixup;
+			out_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		}
+	}
+
+	skl_tplg_update_params(in_fmt, params, in_fixup);
+	skl_tplg_update_params(out_fmt, params, out_fixup);
+}
+
+/*
+ * A module needs input and output buffers, which are dependent upon pcm
+ * params, so once we have calculate params, we need buffer calculation as
+ * well.
+ */
+static void skl_tplg_update_buffer_size(struct skl_sst *ctx,
+				struct skl_module_cfg *mcfg)
+{
+	int multiplier = 1;
+
+	if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
+		multiplier = 5;
+
+	mcfg->ibs = (mcfg->in_fmt.s_freq / 1000) *
+				(mcfg->in_fmt.channels) *
+				(mcfg->in_fmt.bit_depth >> 3) *
+				multiplier;
+
+	mcfg->obs = (mcfg->out_fmt.s_freq / 1000) *
+				(mcfg->out_fmt.channels) *
+				(mcfg->out_fmt.bit_depth >> 3) *
+				multiplier;
+}
+
+static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w,
+							struct skl_sst *ctx)
+{
+	struct skl_module_cfg *m_cfg = w->priv;
+	struct skl_pipe_params *params = m_cfg->pipe->p_params;
+	int p_conn_type = m_cfg->pipe->conn_type;
+	bool is_fe;
+
+	if (!m_cfg->params_fixup)
+		return;
+
+	dev_dbg(ctx->dev, "Mconfig for widget=%s BEFORE updation\n",
+				w->name);
+
+	skl_dump_mconfig(ctx, m_cfg);
+
+	if (p_conn_type == SKL_PIPE_CONN_TYPE_FE)
+		is_fe = true;
+	else
+		is_fe = false;
+
+	skl_tplg_update_params_fixup(m_cfg, params, is_fe);
+	skl_tplg_update_buffer_size(ctx, m_cfg);
+
+	dev_dbg(ctx->dev, "Mconfig for widget=%s AFTER updation\n",
+				w->name);
+
+	skl_dump_mconfig(ctx, m_cfg);
+}
+
+/*
+ * A pipe can have multiple modules, each of them will be a DAPM widget as
+ * well. While managing a pipeline we need to get the list of all the
+ * widgets in a pipelines, so this helper - skl_tplg_get_pipe_widget() helps
+ * to get the SKL type widgets in that pipeline
+ */
+static int skl_tplg_alloc_pipe_widget(struct device *dev,
+	struct snd_soc_dapm_widget *w, struct skl_pipe *pipe)
+{
+	struct skl_module_cfg *src_module = NULL;
+	struct snd_soc_dapm_path *p = NULL;
+	struct skl_pipe_module *p_module = NULL;
+
+	p_module = devm_kzalloc(dev, sizeof(*p_module), GFP_KERNEL);
+	if (!p_module)
+		return -ENOMEM;
+
+	p_module->w = w;
+	list_add_tail(&p_module->node, &pipe->w_list);
+
+	snd_soc_dapm_widget_for_each_sink_path(w, p) {
+		if ((p->sink->priv == NULL)
+				&& (!is_skl_dsp_widget_type(w)))
+			continue;
+
+		if ((p->sink->priv != NULL) && p->connect
+				&& is_skl_dsp_widget_type(p->sink)) {
+
+			src_module = p->sink->priv;
+			if (pipe->ppl_id == src_module->pipe->ppl_id)
+				skl_tplg_alloc_pipe_widget(dev,
+							p->sink, pipe);
+		}
+	}
+	return 0;
+}
+
+/*
+ * Inside a pipe instance, we can have various modules. These modules need
+ * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by
+ * skl_init_module() routine, so invoke that for all modules in a pipeline
+ */
+static int
+skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
+{
+	struct skl_pipe_module *w_module;
+	struct snd_soc_dapm_widget *w;
+	struct skl_module_cfg *mconfig;
+	struct skl_sst *ctx = skl->skl_sst;
+	int ret = 0;
+
+	list_for_each_entry(w_module, &pipe->w_list, node) {
+		w = w_module->w;
+		mconfig = w->priv;
+
+		/* check resource available */
+		if (!skl_tplg_alloc_pipe_mcps(skl, mconfig))
+			return -ENOMEM;
+
+		/*
+		 * apply fix/conversion to module params based on
+		 * FE/BE params
+		 */
+		skl_tplg_update_module_params(w, ctx);
+		ret = skl_init_module(ctx, mconfig, NULL);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Mixer module represents a pipeline. So in the Pre-PMU event of mixer we
+ * need create the pipeline. So we do following:
+ *   - check the resources
+ *   - Create the pipeline
+ *   - Initialize the modules in pipeline
+ *   - finally bind all modules together
+ */
+static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
+							struct skl *skl)
+{
+	int ret;
+	struct skl_module_cfg *mconfig = w->priv;
+	struct skl_pipe_module *w_module;
+	struct skl_pipe *s_pipe = mconfig->pipe;
+	struct skl_module_cfg *src_module = NULL, *dst_module;
+	struct skl_sst *ctx = skl->skl_sst;
+
+	/* check resource available */
+	if (!skl_tplg_alloc_pipe_mcps(skl, mconfig))
+		return -EBUSY;
+
+	if (!skl_tplg_alloc_pipe_mem(skl, mconfig))
+		return -ENOMEM;
+
+	/*
+	 * Create a list of modules for pipe.
+	 * This list contains modules from source to sink
+	 */
+	ret = skl_create_pipeline(ctx, mconfig->pipe);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * we create a w_list of all widgets in that pipe. This list is not
+	 * freed on PMD event as widgets within a pipe are static. This
+	 * saves us cycles to get widgets in pipe every time.
+	 *
+	 * So if we have already initialized all the widgets of a pipeline
+	 * we skip, so check for list_empty and create the list if empty
+	 */
+	if (list_empty(&s_pipe->w_list)) {
+		ret = skl_tplg_alloc_pipe_widget(ctx->dev, w, s_pipe);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Init all pipe modules from source to sink */
+	ret = skl_tplg_init_pipe_modules(skl, s_pipe);
+	if (ret < 0)
+		return ret;
+
+	/* Bind modules from source to sink */
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		dst_module = w_module->w->priv;
+
+		if (src_module == NULL) {
+			src_module = dst_module;
+			continue;
+		}
+
+		ret = skl_bind_modules(ctx, src_module, dst_module);
+		if (ret < 0)
+			return ret;
+
+		src_module = dst_module;
+	}
+
+	return 0;
+}
+
+/*
+ * A PGA represents a module in a pipeline. So in the Pre-PMU event of PGA
+ * we need to do following:
+ *   - Bind to sink pipeline
+ *      Since the sink pipes can be running and we don't get mixer event on
+ *      connect for already running mixer, we need to find the sink pipes
+ *      here and bind to them. This way dynamic connect works.
+ *   - Start sink pipeline, if not running
+ *   - Then run current pipe
+ */
+static int skl_tplg_pga_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
+							struct skl *skl)
+{
+	struct snd_soc_dapm_path *p;
+	struct skl_dapm_path_list *path_list;
+	struct snd_soc_dapm_widget *source, *sink;
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	struct skl_sst *ctx = skl->skl_sst;
+	int ret = 0;
+
+	source = w;
+	src_mconfig = source->priv;
+
+	/*
+	 * find which sink it is connected to, bind with the sink,
+	 * if sink is not started, start sink pipe first, then start
+	 * this pipe
+	 */
+	snd_soc_dapm_widget_for_each_source_path(w, p) {
+		if (!p->connect)
+			continue;
+
+		dev_dbg(ctx->dev, "%s: src widget=%s\n", __func__, w->name);
+		dev_dbg(ctx->dev, "%s: sink widget=%s\n", __func__, p->sink->name);
+
+		/*
+		 * here we will check widgets in sink pipelines, so that
+		 * can be any widgets type and we are only interested if
+		 * they are ones used for SKL so check that first
+		 */
+		if ((p->sink->priv != NULL) &&
+					is_skl_dsp_widget_type(p->sink)) {
+
+			sink = p->sink;
+			src_mconfig = source->priv;
+			sink_mconfig = sink->priv;
+
+			/* Bind source to sink, mixin is always source */
+			ret = skl_bind_modules(ctx, src_mconfig, sink_mconfig);
+			if (ret)
+				return ret;
+
+			/* Start sinks pipe first */
+			if (sink_mconfig->pipe->state != SKL_PIPE_STARTED) {
+				ret = skl_run_pipe(ctx, sink_mconfig->pipe);
+				if (ret)
+					return ret;
+			}
+
+			path_list = kzalloc(
+					sizeof(struct skl_dapm_path_list),
+					GFP_KERNEL);
+			if (path_list == NULL)
+				return -ENOMEM;
+
+			/* Add connected path to one global list */
+			path_list->dapm_path = p;
+			list_add_tail(&path_list->node, &skl->dapm_path_list);
+			break;
+		}
+	}
+
+	/* Start source pipe last after starting all sinks */
+	ret = skl_run_pipe(ctx, src_mconfig->pipe);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * in the Post-PMU event of mixer we need to do following:
+ *   - Check if this pipe is running
+ *   - if not, then
+ *	- bind this pipeline to its source pipeline
+ *	  if source pipe is already running, this means it is a dynamic
+ *	  connection and we need to bind only to that pipe
+ *	- start this pipeline
+ */
+static int skl_tplg_mixer_dapm_post_pmu_event(struct snd_soc_dapm_widget *w,
+							struct skl *skl)
+{
+	int ret = 0;
+	struct snd_soc_dapm_path *p;
+	struct snd_soc_dapm_widget *source, *sink;
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	struct skl_sst *ctx = skl->skl_sst;
+	int src_pipe_started = 0;
+
+	sink = w;
+	sink_mconfig = sink->priv;
+
+	/*
+	 * If source pipe is already started, that means source is driving
+	 * one more sink before this sink got connected, Since source is
+	 * started, bind this sink to source and start this pipe.
+	 */
+	snd_soc_dapm_widget_for_each_sink_path(w, p) {
+		if (!p->connect)
+			continue;
+
+		dev_dbg(ctx->dev, "sink widget=%s\n", w->name);
+		dev_dbg(ctx->dev, "src widget=%s\n", p->source->name);
+
+		/*
+		 * here we will check widgets in sink pipelines, so that
+		 * can be any widgets type and we are only interested if
+		 * they are ones used for SKL so check that first
+		 */
+		if ((p->source->priv != NULL) &&
+					is_skl_dsp_widget_type(p->source)) {
+			source = p->source;
+			src_mconfig = source->priv;
+			sink_mconfig = sink->priv;
+			src_pipe_started = 1;
+
+			/*
+			 * check pipe state, then no need to bind or start
+			 * the pipe
+			 */
+			if (src_mconfig->pipe->state != SKL_PIPE_STARTED)
+				src_pipe_started = 0;
+		}
+	}
+
+	if (src_pipe_started) {
+		ret = skl_bind_modules(ctx, src_mconfig, sink_mconfig);
+		if (ret)
+			return ret;
+
+		ret = skl_run_pipe(ctx, sink_mconfig->pipe);
+	}
+
+	return ret;
+}
+
+/*
+ * in the Pre-PMD event of mixer we need to do following:
+ *   - Stop the pipe
+ *   - find the source connections and remove that from dapm_path_list
+ *   - unbind with source pipelines if still connected
+ */
+static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w,
+							struct skl *skl)
+{
+	struct snd_soc_dapm_widget *source, *sink;
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	int ret = 0, path_found = 0;
+	struct skl_dapm_path_list *path_list, *tmp_list;
+	struct skl_sst *ctx = skl->skl_sst;
+
+	sink = w;
+	sink_mconfig = sink->priv;
+
+	/* Stop the pipe */
+	ret = skl_stop_pipe(ctx, sink_mconfig->pipe);
+	if (ret)
+		return ret;
+
+	/*
+	 * This list, dapm_path_list handling here does not need any locks
+	 * as we are under dapm lock while handling widget events.
+	 * List can be manipulated safely only under dapm widgets handler
+	 * routines
+	 */
+	list_for_each_entry_safe(path_list, tmp_list,
+				&skl->dapm_path_list, node) {
+		if (path_list->dapm_path->sink == sink) {
+			dev_dbg(ctx->dev, "Path found = %s\n",
+					path_list->dapm_path->name);
+			source = path_list->dapm_path->source;
+			src_mconfig = source->priv;
+			path_found = 1;
+
+			list_del(&path_list->node);
+			kfree(path_list);
+			break;
+		}
+	}
+
+	/*
+	 * If path_found == 1, that means pmd for source pipe has
+	 * not occurred, source is connected to some other sink.
+	 * so its responsibility of sink to unbind itself from source.
+	 */
+	if (path_found) {
+		ret = skl_stop_pipe(ctx, src_mconfig->pipe);
+		if (ret < 0)
+			return ret;
+
+		ret = skl_unbind_modules(ctx, src_mconfig, sink_mconfig);
+	}
+
+	return ret;
+}
+
+/*
+ * in the Post-PMD event of mixer we need to do following:
+ *   - Free the mcps used
+ *   - Free the mem used
+ *   - Unbind the modules within the pipeline
+ *   - Delete the pipeline (modules are not required to be explicitly
+ *     deleted, pipeline delete is enough here
+ */
+static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w,
+							struct skl *skl)
+{
+	struct skl_module_cfg *mconfig = w->priv;
+	struct skl_pipe_module *w_module;
+	struct skl_module_cfg *src_module = NULL, *dst_module;
+	struct skl_sst *ctx = skl->skl_sst;
+	struct skl_pipe *s_pipe = mconfig->pipe;
+	int ret = 0;
+
+	skl_tplg_free_pipe_mcps(skl, mconfig);
+
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		dst_module = w_module->w->priv;
+
+		if (src_module == NULL) {
+			src_module = dst_module;
+			continue;
+		}
+
+		ret = skl_unbind_modules(ctx, src_module, dst_module);
+		if (ret < 0)
+			return ret;
+
+		src_module = dst_module;
+	}
+
+	ret = skl_delete_pipe(ctx, mconfig->pipe);
+	skl_tplg_free_pipe_mem(skl, mconfig);
+
+	return ret;
+}
+
+/*
+ * in the Post-PMD event of PGA we need to do following:
+ *   - Free the mcps used
+ *   - Stop the pipeline
+ *   - In source pipe is connected, unbind with source pipelines
+ */
+static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w,
+								struct skl *skl)
+{
+	struct snd_soc_dapm_widget *source, *sink;
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	int ret = 0, path_found = 0;
+	struct skl_dapm_path_list *path_list, *tmp_path_list;
+	struct skl_sst *ctx = skl->skl_sst;
+
+	source = w;
+	src_mconfig = source->priv;
+
+	skl_tplg_free_pipe_mcps(skl, src_mconfig);
+	/* Stop the pipe since this is a mixin module */
+	ret = skl_stop_pipe(ctx, src_mconfig->pipe);
+	if (ret)
+		return ret;
+
+	list_for_each_entry_safe(path_list, tmp_path_list, &skl->dapm_path_list, node) {
+		if (path_list->dapm_path->source == source) {
+			dev_dbg(ctx->dev, "Path found = %s\n",
+					path_list->dapm_path->name);
+			sink = path_list->dapm_path->sink;
+			sink_mconfig = sink->priv;
+			path_found = 1;
+
+			list_del(&path_list->node);
+			kfree(path_list);
+			break;
+		}
+	}
+
+	/*
+	 * This is a connector and if path is found that means
+	 * unbind between source and sink has not happened yet
+	 */
+	if (path_found) {
+		ret = skl_stop_pipe(ctx, src_mconfig->pipe);
+		if (ret < 0)
+			return ret;
+
+		ret = skl_unbind_modules(ctx, src_mconfig, sink_mconfig);
+	}
+
+	return ret;
+}
+
+/*
+ * In modelling, we assume there will be ONLY one mixer in a pipeline.  If
+ * mixer is not required then it is treated as static mixer aka vmixer with
+ * a hard path to source module
+ * So we don't need to check if source is started or not as hard path puts
+ * dependency on each other
+ */
+static int skl_tplg_vmixer_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct skl *skl = get_skl_ctx(dapm->dev);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return skl_tplg_mixer_dapm_pre_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMD:
+		return skl_tplg_mixer_dapm_post_pmd_event(w, skl);
+	}
+
+	return 0;
+}
+
+/*
+ * In modelling, we assume there will be ONLY one mixer in a pipeline. If a
+ * second one is required that is created as another pipe entity.
+ * The mixer is responsible for pipe management and represent a pipeline
+ * instance
+ */
+static int skl_tplg_mixer_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct skl *skl = get_skl_ctx(dapm->dev);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return skl_tplg_mixer_dapm_pre_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMU:
+		return skl_tplg_mixer_dapm_post_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_PRE_PMD:
+		return skl_tplg_mixer_dapm_pre_pmd_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMD:
+		return skl_tplg_mixer_dapm_post_pmd_event(w, skl);
+	}
+
+	return 0;
+}
+
+/*
+ * In modelling, we assumed rest of the modules in pipeline are PGA. But we
+ * are interested in last PGA (leaf PGA) in a pipeline to disconnect with
+ * the sink when it is running (two FE to one BE or one FE to two BE)
+ * scenarios
+ */
+static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k, int event)
+
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct skl *skl = get_skl_ctx(dapm->dev);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return skl_tplg_pga_dapm_pre_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMD:
+		return skl_tplg_pga_dapm_post_pmd_event(w, skl);
+	}
+
+	return 0;
+}
+
+/*
+ * The FE params are passed by hw_params of the DAI.
+ * On hw_params, the params are stored in Gateway module of the FE and we
+ * need to calculate the format in DSP module configuration, that
+ * conversion is done here
+ */
+int skl_tplg_update_pipe_params(struct device *dev,
+			struct skl_module_cfg *mconfig,
+			struct skl_pipe_params *params)
+{
+	struct skl_pipe *pipe = mconfig->pipe;
+	struct skl_module_fmt *format = NULL;
+
+	memcpy(pipe->p_params, params, sizeof(*params));
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		format = &mconfig->in_fmt;
+	else
+		format = &mconfig->out_fmt;
+
+	/* set the hw_params */
+	format->s_freq = params->s_freq;
+	format->channels = params->ch;
+	format->valid_bit_depth = skl_get_bit_depth(params->s_fmt);
+
+	/*
+	 * 16 bit is 16 bit container whereas 24 bit is in 32 bit
+	 * container so update bit depth accordingly
+	 */
+	switch (format->valid_bit_depth) {
+	case SKL_DEPTH_16BIT:
+		format->bit_depth = format->valid_bit_depth;
+		break;
+
+	case SKL_DEPTH_24BIT:
+		format->bit_depth = SKL_DEPTH_32BIT;
+		break;
+
+	default:
+		dev_err(dev, "Invalid bit depth %x for pipe\n",
+				format->valid_bit_depth);
+		return -EINVAL;
+	}
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		mconfig->ibs = (format->s_freq / 1000) *
+				(format->channels) *
+				(format->bit_depth >> 3);
+	} else {
+		mconfig->obs = (format->s_freq / 1000) *
+				(format->channels) *
+				(format->bit_depth >> 3);
+	}
+
+	return 0;
+}
+
+/*
+ * Query the module config for the FE DAI
+ * This is used to find the hw_params set for that DAI and apply to FE
+ * pipeline
+ */
+struct skl_module_cfg *
+skl_tplg_fe_get_cpr_module(struct snd_soc_dai *dai, int stream)
+{
+	struct snd_soc_dapm_widget *w;
+	struct snd_soc_dapm_path *p = NULL;
+
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		w = dai->playback_widget;
+		snd_soc_dapm_widget_for_each_sink_path(w, p) {
+			if (p->connect && p->sink->power &&
+					is_skl_dsp_widget_type(p->sink))
+				continue;
+
+			if (p->sink->priv) {
+				dev_dbg(dai->dev, "set params for %s\n",
+						p->sink->name);
+				return p->sink->priv;
+			}
+		}
+	} else {
+		w = dai->capture_widget;
+		snd_soc_dapm_widget_for_each_source_path(w, p) {
+			if (p->connect && p->source->power &&
+					is_skl_dsp_widget_type(p->source))
+				continue;
+
+			if (p->source->priv) {
+				dev_dbg(dai->dev, "set params for %s\n",
+						p->source->name);
+				return p->source->priv;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+static u8 skl_tplg_be_link_type(int dev_type)
+{
+	int ret;
+
+	switch (dev_type) {
+	case SKL_DEVICE_BT:
+		ret = NHLT_LINK_SSP;
+		break;
+
+	case SKL_DEVICE_DMIC:
+		ret = NHLT_LINK_DMIC;
+		break;
+
+	case SKL_DEVICE_I2S:
+		ret = NHLT_LINK_SSP;
+		break;
+
+	case SKL_DEVICE_HDALINK:
+		ret = NHLT_LINK_HDA;
+		break;
+
+	default:
+		ret = NHLT_LINK_INVALID;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Fill the BE gateway parameters
+ * The BE gateway expects a blob of parameters which are kept in the ACPI
+ * NHLT blob, so query the blob for interface type (i2s/pdm) and instance.
+ * The port can have multiple settings so pick based on the PCM
+ * parameters
+ */
+static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai,
+				struct skl_module_cfg *mconfig,
+				struct skl_pipe_params *params)
+{
+	struct skl_pipe *pipe = mconfig->pipe;
+	struct nhlt_specific_cfg *cfg;
+	struct skl *skl = get_skl_ctx(dai->dev);
+	int link_type = skl_tplg_be_link_type(mconfig->dev_type);
+
+	memcpy(pipe->p_params, params, sizeof(*params));
+
+	/* update the blob based on virtual bus_id*/
+	cfg = skl_get_ep_blob(skl, mconfig->vbus_id, link_type,
+					params->s_fmt, params->ch,
+					params->s_freq, params->stream);
+	if (cfg) {
+		mconfig->formats_config.caps_size = cfg->size;
+		mconfig->formats_config.caps = (u32 *) &cfg->caps;
+	} else {
+		dev_err(dai->dev, "Blob NULL for id %x type %d dirn %d\n",
+					mconfig->vbus_id, link_type,
+					params->stream);
+		dev_err(dai->dev, "PCM: ch %d, freq %d, fmt %d\n",
+				 params->ch, params->s_freq, params->s_fmt);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai,
+				struct snd_soc_dapm_widget *w,
+				struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_path *p;
+	int ret = -EIO;
+
+	snd_soc_dapm_widget_for_each_source_path(w, p) {
+		if (p->connect && is_skl_dsp_widget_type(p->source) &&
+						p->source->priv) {
+
+			if (!p->source->power) {
+				ret = skl_tplg_be_fill_pipe_params(
+						dai, p->source->priv,
+						params);
+				if (ret < 0)
+					return ret;
+			} else {
+				return -EBUSY;
+			}
+		} else {
+			ret = skl_tplg_be_set_src_pipe_params(
+						dai, p->source,	params);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int skl_tplg_be_set_sink_pipe_params(struct snd_soc_dai *dai,
+	struct snd_soc_dapm_widget *w, struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_path *p = NULL;
+	int ret = -EIO;
+
+	snd_soc_dapm_widget_for_each_sink_path(w, p) {
+		if (p->connect && is_skl_dsp_widget_type(p->sink) &&
+						p->sink->priv) {
+
+			if (!p->sink->power) {
+				ret = skl_tplg_be_fill_pipe_params(
+						dai, p->sink->priv, params);
+				if (ret < 0)
+					return ret;
+			} else {
+				return -EBUSY;
+			}
+
+		} else {
+			ret = skl_tplg_be_set_sink_pipe_params(
+						dai, p->sink, params);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * BE hw_params can be a source parameters (capture) or sink parameters
+ * (playback). Based on sink and source we need to either find the source
+ * list or the sink list and set the pipeline parameters
+ */
+int skl_tplg_be_update_params(struct snd_soc_dai *dai,
+				struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_widget *w;
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		w = dai->playback_widget;
+
+		return skl_tplg_be_set_src_pipe_params(dai, w, params);
+
+	} else {
+		w = dai->capture_widget;
+
+		return skl_tplg_be_set_sink_pipe_params(dai, w, params);
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_tplg_widget_events skl_tplg_widget_ops[] = {
+	{SKL_MIXER_EVENT, skl_tplg_mixer_event},
+	{SKL_VMIXER_EVENT, skl_tplg_vmixer_event},
+	{SKL_PGA_EVENT, skl_tplg_pga_event},
+};
+
+/*
+ * The topology binary passes the pin info for a module so initialize the pin
+ * info passed into module instance
+ */
+static void skl_fill_module_pin_info(struct skl_dfw_module_pin *dfw_pin,
+						struct skl_module_pin *m_pin,
+						bool is_dynamic, int max_pin)
+{
+	int i;
+
+	for (i = 0; i < max_pin; i++) {
+		m_pin[i].id.module_id = dfw_pin[i].module_id;
+		m_pin[i].id.instance_id = dfw_pin[i].instance_id;
+		m_pin[i].in_use = false;
+		m_pin[i].is_dynamic = is_dynamic;
+	}
+}
+
+/*
+ * Add pipeline from topology binary into driver pipeline list
+ *
+ * If already added we return that instance
+ * Otherwise we create a new instance and add into driver list
+ */
+static struct skl_pipe *skl_tplg_add_pipe(struct device *dev,
+			struct skl *skl, struct skl_dfw_pipe *dfw_pipe)
+{
+	struct skl_pipeline *ppl;
+	struct skl_pipe *pipe;
+	struct skl_pipe_params *params;
+
+	list_for_each_entry(ppl, &skl->ppl_list, node) {
+		if (ppl->pipe->ppl_id == dfw_pipe->pipe_id)
+			return ppl->pipe;
+	}
+
+	ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL);
+	if (!ppl)
+		return NULL;
+
+	pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL);
+	if (!pipe)
+		return NULL;
+
+	params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return NULL;
+
+	pipe->ppl_id = dfw_pipe->pipe_id;
+	pipe->memory_pages = dfw_pipe->memory_pages;
+	pipe->pipe_priority = dfw_pipe->pipe_priority;
+	pipe->conn_type = dfw_pipe->conn_type;
+	pipe->state = SKL_PIPE_INVALID;
+	pipe->p_params = params;
+	INIT_LIST_HEAD(&pipe->w_list);
+
+	ppl->pipe = pipe;
+	list_add(&ppl->node, &skl->ppl_list);
+
+	return ppl->pipe;
+}
+
+/*
+ * Topology core widget load callback
+ *
+ * This is used to save the private data for each widget which gives
+ * information to the driver about module and pipeline parameters which DSP
+ * FW expects like ids, resource values, formats etc
+ */
+static int skl_tplg_widget_load(struct snd_soc_component *cmpnt,
+				struct snd_soc_dapm_widget *w,
+				struct snd_soc_tplg_dapm_widget *tplg_w)
+{
+	int ret;
+	struct hdac_ext_bus *ebus = snd_soc_component_get_drvdata(cmpnt);
+	struct skl *skl = ebus_to_skl(ebus);
+	struct hdac_bus *bus = ebus_to_hbus(ebus);
+	struct skl_module_cfg *mconfig;
+	struct skl_pipe *pipe;
+	struct skl_dfw_module *dfw_config =
+				(struct skl_dfw_module *)tplg_w->priv.data;
+
+	if (!tplg_w->priv.size)
+		goto bind_event;
+
+	mconfig = devm_kzalloc(bus->dev, sizeof(*mconfig), GFP_KERNEL);
+
+	if (!mconfig)
+		return -ENOMEM;
+
+	w->priv = mconfig;
+	mconfig->id.module_id = dfw_config->module_id;
+	mconfig->id.instance_id = dfw_config->instance_id;
+	mconfig->mcps = dfw_config->max_mcps;
+	mconfig->ibs = dfw_config->ibs;
+	mconfig->obs = dfw_config->obs;
+	mconfig->core_id = dfw_config->core_id;
+	mconfig->max_in_queue = dfw_config->max_in_queue;
+	mconfig->max_out_queue = dfw_config->max_out_queue;
+	mconfig->is_loadable = dfw_config->is_loadable;
+	mconfig->in_fmt.channels = dfw_config->in_fmt.channels;
+	mconfig->in_fmt.s_freq = dfw_config->in_fmt.freq;
+	mconfig->in_fmt.bit_depth = dfw_config->in_fmt.bit_depth;
+	mconfig->in_fmt.valid_bit_depth =
+				dfw_config->in_fmt.valid_bit_depth;
+	mconfig->in_fmt.ch_cfg = dfw_config->in_fmt.ch_cfg;
+	mconfig->out_fmt.channels = dfw_config->out_fmt.channels;
+	mconfig->out_fmt.s_freq = dfw_config->out_fmt.freq;
+	mconfig->out_fmt.bit_depth = dfw_config->out_fmt.bit_depth;
+	mconfig->out_fmt.valid_bit_depth =
+				dfw_config->out_fmt.valid_bit_depth;
+	mconfig->out_fmt.ch_cfg = dfw_config->out_fmt.ch_cfg;
+	mconfig->params_fixup = dfw_config->params_fixup;
+	mconfig->converter = dfw_config->converter;
+	mconfig->m_type = dfw_config->module_type;
+	mconfig->vbus_id = dfw_config->vbus_id;
+
+	pipe = skl_tplg_add_pipe(bus->dev, skl, &dfw_config->pipe);
+	if (pipe)
+		mconfig->pipe = pipe;
+
+	mconfig->dev_type = dfw_config->dev_type;
+	mconfig->hw_conn_type = dfw_config->hw_conn_type;
+	mconfig->time_slot = dfw_config->time_slot;
+	mconfig->formats_config.caps_size = dfw_config->caps.caps_size;
+
+	mconfig->m_in_pin = devm_kzalloc(bus->dev,
+				(mconfig->max_in_queue) *
+					sizeof(*mconfig->m_in_pin),
+				GFP_KERNEL);
+	if (!mconfig->m_in_pin)
+		return -ENOMEM;
+
+	mconfig->m_out_pin = devm_kzalloc(bus->dev, (mconfig->max_out_queue) *
+						sizeof(*mconfig->m_out_pin),
+						GFP_KERNEL);
+	if (!mconfig->m_out_pin)
+		return -ENOMEM;
+
+	skl_fill_module_pin_info(dfw_config->in_pin, mconfig->m_in_pin,
+						dfw_config->is_dynamic_in_pin,
+						mconfig->max_in_queue);
+
+	skl_fill_module_pin_info(dfw_config->out_pin, mconfig->m_out_pin,
+						 dfw_config->is_dynamic_out_pin,
+							mconfig->max_out_queue);
+
+
+	if (mconfig->formats_config.caps_size == 0)
+		goto bind_event;
+
+	mconfig->formats_config.caps = (u32 *)devm_kzalloc(bus->dev,
+			mconfig->formats_config.caps_size, GFP_KERNEL);
+
+	if (mconfig->formats_config.caps == NULL)
+		return -ENOMEM;
+
+	memcpy(mconfig->formats_config.caps, dfw_config->caps.caps,
+					 dfw_config->caps.caps_size);
+
+bind_event:
+	if (tplg_w->event_type == 0) {
+		dev_dbg(bus->dev, "ASoC: No event handler required\n");
+		return 0;
+	}
+
+	ret = snd_soc_tplg_widget_bind_event(w, skl_tplg_widget_ops,
+					ARRAY_SIZE(skl_tplg_widget_ops),
+					tplg_w->event_type);
+
+	if (ret) {
+		dev_err(bus->dev, "%s: No matching event handlers found for %d\n",
+					__func__, tplg_w->event_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_tplg_ops skl_tplg_ops  = {
+	.widget_load = skl_tplg_widget_load,
+};
+
+/* This will be read from topology manifest, currently defined here */
+#define SKL_MAX_MCPS 30000000
+#define SKL_FW_MAX_MEM 1000000
+
+/*
+ * SKL topology init routine
+ */
+int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus)
+{
+	int ret;
+	const struct firmware *fw;
+	struct hdac_bus *bus = ebus_to_hbus(ebus);
+	struct skl *skl = ebus_to_skl(ebus);
+
+	ret = request_firmware(&fw, "dfw_sst.bin", bus->dev);
+	if (ret < 0) {
+		dev_err(bus->dev, "tplg fw %s load failed with %d\n",
+				"dfw_sst.bin", ret);
+		return ret;
+	}
+
+	/*
+	 * The complete tplg for SKL is loaded as index 0, we don't use
+	 * any other index
+	 */
+	ret = snd_soc_tplg_component_load(&platform->component,
+					&skl_tplg_ops, fw, 0);
+	if (ret < 0) {
+		dev_err(bus->dev, "tplg component load failed%d\n", ret);
+		return -EINVAL;
+	}
+
+	skl->resource.max_mcps = SKL_MAX_MCPS;
+	skl->resource.max_mem = SKL_FW_MAX_MEM;
+
+	return 0;
+}