ASoC: codecs: wm*: rename to snd_soc_component_read()

We need to use snd_soc_component_read()
instead of     snd_soc_component_read32()

This patch renames _read32() to _read()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeqf4mcl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 15 insertions, 15 deletions

diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index e93af7edd8f7..891effe220fe 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -85,7 +85,7 @@ static void wait_for_dc_servo(struct snd_soc_component *component, unsigned int
 		else
 			msleep(1);
 
-		reg = snd_soc_component_read32(component, WM8993_DC_SERVO_0);
+		reg = snd_soc_component_read(component, WM8993_DC_SERVO_0);
 		dev_dbg(component->dev, "DC servo: %x\n", reg);
 	} while (reg & op && count < timeout);
 
@@ -109,7 +109,7 @@ static bool wm_hubs_dac_hp_direct(struct snd_soc_component *component)
 	int reg;
 
 	/* If we're going via the mixer we'll need to do additional checks */
-	reg = snd_soc_component_read32(component, WM8993_OUTPUT_MIXER1);
+	reg = snd_soc_component_read(component, WM8993_OUTPUT_MIXER1);
 	if (!(reg & WM8993_DACL_TO_HPOUT1L)) {
 		if (reg & ~WM8993_DACL_TO_MIXOUTL) {
 			dev_vdbg(component->dev, "Analogue paths connected: %x\n",
@@ -122,7 +122,7 @@ static bool wm_hubs_dac_hp_direct(struct snd_soc_component *component)
 		dev_vdbg(component->dev, "HPL connected to DAC\n");
 	}
 
-	reg = snd_soc_component_read32(component, WM8993_OUTPUT_MIXER2);
+	reg = snd_soc_component_read(component, WM8993_OUTPUT_MIXER2);
 	if (!(reg & WM8993_DACR_TO_HPOUT1R)) {
 		if (reg & ~WM8993_DACR_TO_MIXOUTR) {
 			dev_vdbg(component->dev, "Analogue paths connected: %x\n",
@@ -152,10 +152,10 @@ static bool wm_hubs_dcs_cache_get(struct snd_soc_component *component,
 	struct wm_hubs_dcs_cache *cache;
 	unsigned int left, right;
 
-	left = snd_soc_component_read32(component, WM8993_LEFT_OUTPUT_VOLUME);
+	left = snd_soc_component_read(component, WM8993_LEFT_OUTPUT_VOLUME);
 	left &= WM8993_HPOUT1L_VOL_MASK;
 
-	right = snd_soc_component_read32(component, WM8993_RIGHT_OUTPUT_VOLUME);
+	right = snd_soc_component_read(component, WM8993_RIGHT_OUTPUT_VOLUME);
 	right &= WM8993_HPOUT1R_VOL_MASK;
 
 	list_for_each_entry(cache, &hubs->dcs_cache, list) {
@@ -181,10 +181,10 @@ static void wm_hubs_dcs_cache_set(struct snd_soc_component *component, u16 dcs_c
 	if (!cache)
 		return;
 
-	cache->left = snd_soc_component_read32(component, WM8993_LEFT_OUTPUT_VOLUME);
+	cache->left = snd_soc_component_read(component, WM8993_LEFT_OUTPUT_VOLUME);
 	cache->left &= WM8993_HPOUT1L_VOL_MASK;
 
-	cache->right = snd_soc_component_read32(component, WM8993_RIGHT_OUTPUT_VOLUME);
+	cache->right = snd_soc_component_read(component, WM8993_RIGHT_OUTPUT_VOLUME);
 	cache->right &= WM8993_HPOUT1R_VOL_MASK;
 
 	cache->dcs_cfg = dcs_cfg;
@@ -216,14 +216,14 @@ static int wm_hubs_read_dc_servo(struct snd_soc_component *component,
 	 */
 	switch (hubs->dcs_readback_mode) {
 	case 0:
-		*reg_l = snd_soc_component_read32(component, WM8993_DC_SERVO_READBACK_1)
+		*reg_l = snd_soc_component_read(component, WM8993_DC_SERVO_READBACK_1)
 			& WM8993_DCS_INTEG_CHAN_0_MASK;
-		*reg_r = snd_soc_component_read32(component, WM8993_DC_SERVO_READBACK_2)
+		*reg_r = snd_soc_component_read(component, WM8993_DC_SERVO_READBACK_2)
 			& WM8993_DCS_INTEG_CHAN_1_MASK;
 		break;
 	case 2:
 	case 1:
-		reg = snd_soc_component_read32(component, dcs_reg);
+		reg = snd_soc_component_read(component, dcs_reg);
 		*reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
 			>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
 		*reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
@@ -342,7 +342,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
 		return ret;
 
 	/* Only need to do this if the outputs are active */
-	if (snd_soc_component_read32(component, WM8993_POWER_MANAGEMENT_1)
+	if (snd_soc_component_read(component, WM8993_POWER_MANAGEMENT_1)
 	    & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
 		snd_soc_component_update_bits(component,
 				    WM8993_DC_SERVO_0,
@@ -538,7 +538,7 @@ static int hp_event(struct snd_soc_dapm_widget *w,
 		    struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	unsigned int reg = snd_soc_component_read32(component, WM8993_ANALOGUE_HP_0);
+	unsigned int reg = snd_soc_component_read(component, WM8993_ANALOGUE_HP_0);
 
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
@@ -590,7 +590,7 @@ static int earpiece_event(struct snd_soc_dapm_widget *w,
 			  struct snd_kcontrol *control, int event)
 {
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	u16 reg = snd_soc_component_read32(component, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA;
+	u16 reg = snd_soc_component_read(component, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA;
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
@@ -680,9 +680,9 @@ void wm_hubs_update_class_w(struct snd_soc_component *component)
 			    WM8993_CP_DYN_V | WM8993_CP_DYN_FREQ, enable);
 
 	snd_soc_component_write(component, WM8993_LEFT_OUTPUT_VOLUME,
-		      snd_soc_component_read32(component, WM8993_LEFT_OUTPUT_VOLUME));
+		      snd_soc_component_read(component, WM8993_LEFT_OUTPUT_VOLUME));
 	snd_soc_component_write(component, WM8993_RIGHT_OUTPUT_VOLUME,
-		      snd_soc_component_read32(component, WM8993_RIGHT_OUTPUT_VOLUME));
+		      snd_soc_component_read(component, WM8993_RIGHT_OUTPUT_VOLUME));
 }
 EXPORT_SYMBOL_GPL(wm_hubs_update_class_w);