Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was a busy development cycle at this time, as you can see a wide
  range of changes in diffstat.  There are no big changes but many
  refactoring and improvements.  Here we go some highlights:

  ALSA core:
   - Procfs codes were cleaned up to use seq_file
   - Procfs can be opt out via Kconfig (only for EXPERT)
   - Two types of jack API were unified finally; now both kctl and input
     jack devs are handled via a single function call.

  HD-audio:
   - Continued code restructuring for the future ASoC driver; now HDA
     controller driver is split to a core helper module.
   - Preliminary codes for Skylake audio support in HDA core.
   - Proper i915 gfx power well management for SKL & co
   - Enabled runtime PM as default for Intel HDMI/DP codecs
   - Newer Tegra chip supports
   - More quirks for Dell headsets, Alienware (with CA0132), etc.
   - A couple of DRM ELD helper API functions

  ASoC:
   - Support for loading ASoC topology maps from firmware, intended to
     be used to allow self-describing DSP firmware images to be built
     which can map controls added by the DSP to userspace without the
     kernel needing to know about individual DSP firmwares
   - Lots of refactoring to avoid direct access to snd_soc_codec where
     it's not needed supporting future refactoring
   - Big refactoring, cleanup and enhancement for the Wolfson ADSP
     driver
   - Cleanup series for TI TAS2552 and R-CAR drivers
   - Fixes and improvements on RT56xx codecs
   - Support for TI TAS571x power amplifiers
   - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
   - Support for x86 systems with RT5650 and Qualcomm Storm
   - Support for Mediatek AFE (Audio Front End) unit
   - Other various small fixes to ASoC codec drivers

  Firewire:
   - Enhanced to allow non-blocking streams to use timestamp
     synchronization
   - Improve support for DM1500 and BeBoBv3

  Misc:
   - Cleanup of old pci API functions over all PCI sound drivers
   - Fix long-standing regression of the old powermac i2c setup"

* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
  ALSA: pcm: Fix pcm_class sysfs output
  ALSA: hda-beep: Update authors dead email address
  ASoC: wm_adsp: Move DSP Rate controls into the codec
  ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
  ALSA: hda: provide default bus io ops extended hdac
  ALSA: hda: add hda link cleanup routine
  ALSA: hda: add hdac_ext stream creation and cleanup routines
  ASoC: rsrc-card: remove unused ret
  ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
  ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
  ASoC: mediatek: Add machine driver for MAX98090 codec
  ASoC: mediatek: Add AFE platform driver
  ASoC: rsnd: remove io from rsnd_mod
  ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
  ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
  ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
  ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
  ...

1 files changed, 128 insertions, 0 deletions

diff --git a/sound/soc/codecs/rl6347a.c b/sound/soc/codecs/rl6347a.c
new file mode 100644
index 000000000000..91d5166bd3a1
--- /dev/null
+++ b/sound/soc/codecs/rl6347a.c
@@ -0,0 +1,128 @@
+/*
+ * rl6347a.c - RL6347A class device shared support
+ *
+ * Copyright 2015 Realtek Semiconductor Corp.
+ *
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/jack.h>
+#include <linux/workqueue.h>
+#include <sound/hda_verbs.h>
+
+#include "rl6347a.h"
+
+int rl6347a_hw_write(void *context, unsigned int reg, unsigned int value)
+{
+	struct i2c_client *client = context;
+	struct rl6347a_priv *rl6347a = i2c_get_clientdata(client);
+	u8 data[4];
+	int ret, i;
+
+	/* handle index registers */
+	if (reg <= 0xff) {
+		rl6347a_hw_write(client, RL6347A_COEF_INDEX, reg);
+		for (i = 0; i < rl6347a->index_cache_size; i++) {
+			if (reg == rl6347a->index_cache[i].reg) {
+				rl6347a->index_cache[i].def = value;
+				break;
+			}
+
+		}
+		reg = RL6347A_PROC_COEF;
+	}
+
+	data[0] = (reg >> 24) & 0xff;
+	data[1] = (reg >> 16) & 0xff;
+	/*
+	 * 4 bit VID: reg should be 0
+	 * 12 bit VID: value should be 0
+	 * So we use an OR operator to handle it rather than use if condition.
+	 */
+	data[2] = ((reg >> 8) & 0xff) | ((value >> 8) & 0xff);
+	data[3] = value & 0xff;
+
+	ret = i2c_master_send(client, data, 4);
+
+	if (ret == 4)
+		return 0;
+	else
+		pr_err("ret=%d\n", ret);
+	if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+EXPORT_SYMBOL_GPL(rl6347a_hw_write);
+
+int rl6347a_hw_read(void *context, unsigned int reg, unsigned int *value)
+{
+	struct i2c_client *client = context;
+	struct i2c_msg xfer[2];
+	int ret;
+	__be32 be_reg;
+	unsigned int index, vid, buf = 0x0;
+
+	/* handle index registers */
+	if (reg <= 0xff) {
+		rl6347a_hw_write(client, RL6347A_COEF_INDEX, reg);
+		reg = RL6347A_PROC_COEF;
+	}
+
+	reg = reg | 0x80000;
+	vid = (reg >> 8) & 0xfff;
+
+	if (AC_VERB_GET_AMP_GAIN_MUTE == (vid & 0xf00)) {
+		index = (reg >> 8) & 0xf;
+		reg = (reg & ~0xf0f) | index;
+	}
+	be_reg = cpu_to_be32(reg);
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 4;
+	xfer[0].buf = (u8 *)&be_reg;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = 4;
+	xfer[1].buf = (u8 *)&buf;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret < 0)
+		return ret;
+	else if (ret != 2)
+		return -EIO;
+
+	*value = be32_to_cpu(buf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rl6347a_hw_read);
+
+MODULE_DESCRIPTION("RL6347A class device shared support");
+MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
+MODULE_LICENSE("GPL v2");