ALSA: azt3328: large codec cleanup, add I2S port etc.

- fully separate codec I/O port handling, enabling the use of a single
  function each for all codecs (playback, capture, I2S out)
- add a new separate pcm for I2S out port (UNTESTED, no I2S DAC
  available yet)
- switch gameport to low frequency while idle, to try to reduce noise/power
- improve snd_azf3328_codec_setdmaa() calculation
- minor variable type cleanup (u16, bool etc.)
- add some doc updates (help those lost Windows users, debug help, ...)

Note that due to the large cleanup aspect of the codec I/O change,
I was able to fit everything including all improvements into the
same binary size!! (a measly 10 bytes more or so)

This should now be the almost last patch to this driver
(minus some possible kernel clocksource patch and x86_64 fixes or so).
I just felt like taking a break from the usual stuff and wanted to
get this driver's structure finished, and it's rather clean now...

Tested, working and checkpatch.pl:ed on 2.6.30-rc5,
applies cleanly to 2.6.30 proper.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 40 insertions, 47 deletions

diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
index 974e05122f00..11d4b108b8db 100644
--- a/sound/pci/azt3328.h
+++ b/sound/pci/azt3328.h
@@ -6,50 +6,59 @@
 
 /*** main I/O area port indices ***/
 /* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
-#define AZF_IO_SIZE_CODEC	0x80
-#define AZF_IO_SIZE_CODEC_PM	0x70
+#define AZF_IO_SIZE_CTRL	0x80
+#define AZF_IO_SIZE_CTRL_PM	0x70
 
-/* the driver initialisation suggests a layout of 4 main areas:
- * from 0x00 (playback), from 0x20 (recording) and from 0x40 (maybe MPU401??).
+/* the driver initialisation suggests a layout of 4 areas
+ * within the main card control I/O:
+ * from 0x00 (playback codec), from 0x20 (recording codec)
+ * and from 0x40 (most certainly I2S out codec).
  * And another area from 0x60 to 0x6f (DirectX timer, IRQ management,
  * power management etc.???). */
 
-/** playback area **/
-#define IDX_IO_PLAY_FLAGS       0x00 /* PU:0x0000 */
+#define AZF_IO_OFFS_CODEC_PLAYBACK	0x00
+#define AZF_IO_OFFS_CODEC_CAPTURE	0x20
+#define AZF_IO_OFFS_CODEC_I2S_OUT	0x40
+
+#define IDX_IO_CODEC_DMA_FLAGS       0x00 /* PU:0x0000 */
      /* able to reactivate output after output muting due to 8/16bit
       * output change, just like 0x0002.
       * 0x0001 is the only bit that's able to start the DMA counter */
-  #define DMA_RESUME			0x0001 /* paused if cleared ? */
+  #define DMA_RESUME			0x0001 /* paused if cleared? */
      /* 0x0002 *temporarily* set during DMA stopping. hmm
       * both 0x0002 and 0x0004 set in playback setup. */
      /* able to reactivate output after output muting due to 8/16bit
       * output change, just like 0x0001. */
-  #define DMA_PLAY_SOMETHING1		0x0002 /* \ alternated (toggled) */
+  #define DMA_RUN_SOMETHING1		0x0002 /* \ alternated (toggled) */
      /* 0x0004: NOT able to reactivate output */
-  #define DMA_PLAY_SOMETHING2		0x0004 /* / bits */
+  #define DMA_RUN_SOMETHING2		0x0004 /* / bits */
   #define SOMETHING_ALMOST_ALWAYS_SET	0x0008 /* ???; can be modified */
   #define DMA_EPILOGUE_SOMETHING	0x0010
   #define DMA_SOMETHING_ELSE		0x0020 /* ??? */
-  #define SOMETHING_UNMODIFIABLE	0xffc0 /* unused ? not modifiable */
-#define IDX_IO_PLAY_IRQTYPE     0x02 /* PU:0x0001 */
+  #define SOMETHING_UNMODIFIABLE	0xffc0 /* unused? not modifiable */
+#define IDX_IO_CODEC_IRQTYPE     0x02 /* PU:0x0001 */
   /* write back to flags in case flags are set, in order to ACK IRQ in handler
    * (bit 1 of port 0x64 indicates interrupt for one of these three types)
    * sometimes in this case it just writes 0xffff to globally ACK all IRQs
    * settings written are not reflected when reading back, though.
-   * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows ? */
-  #define IRQ_PLAY_SOMETHING		0x0001 /* something & ACK */
-  #define IRQ_FINISHED_PLAYBUF_1	0x0002 /* 1st dmabuf finished & ACK */
-  #define IRQ_FINISHED_PLAYBUF_2	0x0004 /* 2nd dmabuf finished & ACK */
+   * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows? */
+  #define IRQ_SOMETHING			0x0001 /* something & ACK */
+  #define IRQ_FINISHED_DMABUF_1		0x0002 /* 1st dmabuf finished & ACK */
+  #define IRQ_FINISHED_DMABUF_2		0x0004 /* 2nd dmabuf finished & ACK */
   #define IRQMASK_SOME_STATUS_1		0x0008 /* \ related bits */
   #define IRQMASK_SOME_STATUS_2		0x0010 /* / (checked together in loop) */
-  #define IRQMASK_UNMODIFIABLE		0xffe0 /* unused ? not modifiable */
-#define IDX_IO_PLAY_DMA_START_1 0x04 /* start address of 1st DMA play area, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_START_2 0x08 /* start address of 2nd DMA play area, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_LEN_1   0x0c /* length of 1st DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_DMA_LEN_2   0x0e /* length of 2nd DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_CURROFS	0x14 /* offset within current DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_SOUNDFORMAT 0x16 /* PU:0x0010 */
+  #define IRQMASK_UNMODIFIABLE		0xffe0 /* unused? not modifiable */
+  /* start address of 1st DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_1 0x04
+  /* start address of 2nd DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_2 0x08
+  /* both lengths of DMA transfer areas, PU:0x00000000
+     length1: offset 0x0c, length2: offset 0x0e */
+#define IDX_IO_CODEC_DMA_LENGTHS 0x0c
+#define IDX_IO_CODEC_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
+  /* offset within current DMA transfer area, PU:0x0000 */
+#define IDX_IO_CODEC_DMA_CURROFS 0x14
+#define IDX_IO_CODEC_SOUNDFORMAT 0x16 /* PU:0x0010 */
   /* all unspecified bits can't be modified */
   #define SOUNDFORMAT_FREQUENCY_MASK	0x000f
   #define SOUNDFORMAT_XTAL1		0x00
@@ -76,6 +85,7 @@
   #define SOUNDFORMAT_FLAG_16BIT	0x0010
   #define SOUNDFORMAT_FLAG_2CHANNELS	0x0020
 
+
 /* define frequency helpers, for maximum value safety */
 enum azf_freq_t {
 #define AZF_FREQ(rate) AZF_FREQ_##rate = rate
@@ -96,29 +106,6 @@ enum azf_freq_t {
 #undef AZF_FREQ
 };
 
-/** recording area (see also: playback bit flag definitions) **/
-#define IDX_IO_REC_FLAGS	0x20 /* ??, PU:0x0000 */
-#define IDX_IO_REC_IRQTYPE	0x22 /* ??, PU:0x0000 */
-  #define IRQ_REC_SOMETHING		0x0001 /* something & ACK */
-  #define IRQ_FINISHED_RECBUF_1		0x0002 /* 1st dmabuf finished & ACK */
-  #define IRQ_FINISHED_RECBUF_2		0x0004 /* 2nd dmabuf finished & ACK */
-  /* hmm, maybe these are just the corresponding *recording* flags ?
-   * but OTOH they are most likely at port 0x22 instead */
-  #define IRQMASK_SOME_STATUS_1		0x0008 /* \ related bits */
-  #define IRQMASK_SOME_STATUS_2		0x0010 /* / (checked together in loop) */
-#define IDX_IO_REC_DMA_START_1  0x24 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_START_2  0x28 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_LEN_1    0x2c /* PU:0x0000 */
-#define IDX_IO_REC_DMA_LEN_2    0x2e /* PU:0x0000 */
-#define IDX_IO_REC_DMA_CURRPOS  0x30 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_CURROFS  0x34 /* PU:0x00000000 */
-#define IDX_IO_REC_SOUNDFORMAT  0x36 /* PU:0x0000 */
-
-/** hmm, what is this I/O area for? MPU401?? or external DAC via I2S?? (after playback, recording, ???, timer) **/
-#define IDX_IO_SOMETHING_FLAGS	0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init, PU:0x0000 */
-/* general */
-#define IDX_IO_42H		0x42 /* PU:0x0001 */
-
 /** DirectX timer, main interrupt area (FIXME: and something else?) **/ 
 #define IDX_IO_TIMER_VALUE	0x60 /* found this timer area by pure luck :-) */
   /* timer countdown value; triggers IRQ when timer is finished */
@@ -138,7 +125,7 @@ enum azf_freq_t {
 
   #define IRQ_PLAYBACK	0x0001
   #define IRQ_RECORDING	0x0002
-  #define IRQ_UNKNOWN1	0x0004 /* most probably I2S port */
+  #define IRQ_I2S_OUT	0x0004 /* this IS I2S, right!? (untested) */
   #define IRQ_GAMEPORT	0x0008 /* Interrupt of Digital(ly) Enhanced Game Port */
   #define IRQ_MPU401	0x0010
   #define IRQ_TIMER	0x0020 /* DirectX timer */
@@ -272,6 +259,12 @@ enum {
    * 11 --> 1/200: */
   #define GAME_HWCFG_ADC_COUNTER_FREQ_MASK	0x06
 
+  /* FIXME: these values might be reversed... */
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_STD	0
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_1_2	1
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_1_20	2
+  #define GAME_HWCFG_ADC_COUNTER_FREQ_1_200	3
+
   /* enable gameport legacy I/O address (0x200)
    * I was unable to locate any configurability for a different address: */
   #define GAME_HWCFG_LEGACY_ADDRESS_ENABLE	0x08