Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 295 insertions, 0 deletions

diff --git a/sound/oss/nm256.h b/sound/oss/nm256.h
new file mode 100644
index 000000000000..eae7d99d6826
--- /dev/null
+++ b/sound/oss/nm256.h
@@ -0,0 +1,295 @@
+#ifndef _NM256_H_
+#define _NM256_H_
+
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include "ac97.h"
+
+/* The revisions that we currently handle.  */
+enum nm256rev {
+    REV_NM256AV, REV_NM256ZX
+};
+
+/* Per-card structure. */
+struct nm256_info 
+{
+    /* Magic number used to verify that this struct is valid. */
+#define NM_MAGIC_SIG 0x55aa00ff
+    int magsig;
+
+    /* Revision number */
+    enum nm256rev rev;
+
+    struct ac97_hwint mdev;
+
+    /* Our audio device numbers. */
+    int dev[2];
+
+    /* The # of times each device has been opened. (Should only be 
+       0 or 1). */
+    int opencnt[2];
+
+    /* We use two devices, because we can do simultaneous play and record.
+       This keeps track of which device is being used for what purpose;
+       these are the actual device numbers. */
+    int dev_for_play;
+    int dev_for_record;
+
+	spinlock_t lock;
+	
+    /* The mixer device. */
+    int mixer_oss_dev;
+
+    /* 
+     * Can only be opened once for each operation.  These aren't set
+     * until an actual I/O operation is performed; this allows one
+     * device to be open for read/write without inhibiting I/O to
+     * the other device.
+     */
+    int is_open_play;
+    int is_open_record;
+
+    /* Non-zero if we're currently playing a sample. */
+    int playing;
+    /* Ditto for recording a sample. */
+    int recording;
+
+    /* The two memory ports.  */
+    struct nm256_ports {
+	/* Physical address of the port. */
+	u32 physaddr;
+	/* Our mapped-in pointer. */
+	char __iomem *ptr;
+	/* PTR's offset within the physical port.  */
+	u32 start_offset;
+	/* And the offset of the end of the buffer.  */
+	u32 end_offset;
+    } port[2];
+
+    /* The following are offsets within memory port 1. */
+    u32 coeffBuf;
+    u32 allCoeffBuf;
+
+    /* Record and playback buffers. */
+    u32 abuf1, abuf2;
+
+    /* Offset of the AC97 mixer in memory port 2. */
+    u32 mixer;
+
+    /* Offset of the mixer status register in memory port 2.  */
+    u32 mixer_status_offset;
+
+    /* Non-zero if we have written initial values to the mixer. */
+    u8 mixer_values_init;
+
+    /* 
+     * Status mask bit; (*mixer_status_loc & mixer_status_mask) == 0 means
+     * it's ready.  
+     */
+    u16 mixer_status_mask;
+
+    /* The sizes of the playback and record ring buffers. */
+    u32 playbackBufferSize;
+    u32 recordBufferSize;
+
+    /* Are the coefficient values in the memory cache current? */
+    u8 coeffsCurrent;
+
+    /* For writes, the amount we last wrote. */
+    u32 requested_amt;
+    /* The start of the block currently playing. */
+    u32 curPlayPos;
+
+    /* The amount of data we were requested to record. */
+    u32 requestedRecAmt;
+    /* The offset of the currently-recording block. */
+    u32 curRecPos;
+    /* The destination buffer. */
+    char *recBuf;
+
+    /* Our IRQ number. */
+    int irq;
+
+    /* A flag indicating how many times we've grabbed the IRQ. */
+    int has_irq;
+
+    /* The card interrupt service routine. */
+    irqreturn_t (*introutine) (int, void *, struct pt_regs *);
+
+    /* Current audio config, cached. */
+    struct sinfo {
+	u32 samplerate;
+	u8 bits;
+	u8 stereo;
+    } sinfo[2]; /* goes with each device */
+
+    /* The cards are stored in a chain;  this is the next card. */
+    struct nm256_info *next_card;
+};
+
+/* Debug flag--bigger numbers mean more output. */
+extern int nm256_debug;
+
+/* The BIOS signature. */
+#define NM_SIGNATURE 0x4e4d0000
+/* Signature mask. */
+#define NM_SIG_MASK 0xffff0000
+
+/* Size of the second memory area. */
+#define NM_PORT2_SIZE 4096
+
+/* The base offset of the mixer in the second memory area. */
+#define NM_MIXER_OFFSET 0x600
+
+/* The maximum size of a coefficient entry. */
+#define NM_MAX_COEFFICIENT 0x5000
+
+/* The interrupt register. */
+#define NM_INT_REG 0xa04
+/* And its bits. */
+#define NM_PLAYBACK_INT 0x40
+#define NM_RECORD_INT 0x100
+#define NM_MISC_INT_1 0x4000
+#define NM_MISC_INT_2 0x1
+#define NM_ACK_INT(CARD, X) nm256_writePort16((CARD), 2, NM_INT_REG, (X) << 1)
+
+/* The AV's "mixer ready" status bit and location. */
+#define NM_MIXER_STATUS_OFFSET 0xa04
+#define NM_MIXER_READY_MASK 0x0800
+#define NM_MIXER_PRESENCE 0xa06
+#define NM_PRESENCE_MASK 0x0050
+#define NM_PRESENCE_VALUE 0x0040
+
+/*
+ * For the ZX.  It uses the same interrupt register, but it holds 32
+ * bits instead of 16.
+ */
+#define NM2_PLAYBACK_INT 0x10000
+#define NM2_RECORD_INT 0x80000
+#define NM2_MISC_INT_1 0x8
+#define NM2_MISC_INT_2 0x2
+#define NM2_ACK_INT(CARD, X) nm256_writePort32((CARD), 2, NM_INT_REG, (X))
+
+/* The ZX's "mixer ready" status bit and location. */
+#define NM2_MIXER_STATUS_OFFSET 0xa06
+#define NM2_MIXER_READY_MASK 0x0800
+
+/* The playback registers start from here. */
+#define NM_PLAYBACK_REG_OFFSET 0x0
+/* The record registers start from here. */
+#define NM_RECORD_REG_OFFSET 0x200
+
+/* The rate register is located 2 bytes from the start of the register area. */
+#define NM_RATE_REG_OFFSET 2
+
+/* Mono/stereo flag, number of bits on playback, and rate mask. */
+#define NM_RATE_STEREO 1
+#define NM_RATE_BITS_16 2
+#define NM_RATE_MASK 0xf0
+
+/* Playback enable register. */
+#define NM_PLAYBACK_ENABLE_REG (NM_PLAYBACK_REG_OFFSET + 0x1)
+#define NM_PLAYBACK_ENABLE_FLAG 1
+#define NM_PLAYBACK_ONESHOT 2
+#define NM_PLAYBACK_FREERUN 4
+
+/* Mutes the audio output. */
+#define NM_AUDIO_MUTE_REG (NM_PLAYBACK_REG_OFFSET + 0x18)
+#define NM_AUDIO_MUTE_LEFT 0x8000
+#define NM_AUDIO_MUTE_RIGHT 0x0080
+
+/* Recording enable register. */
+#define NM_RECORD_ENABLE_REG (NM_RECORD_REG_OFFSET + 0)
+#define NM_RECORD_ENABLE_FLAG 1
+#define NM_RECORD_FREERUN 2
+
+#define NM_RBUFFER_START (NM_RECORD_REG_OFFSET + 0x4)
+#define NM_RBUFFER_END   (NM_RECORD_REG_OFFSET + 0x10)
+#define NM_RBUFFER_WMARK (NM_RECORD_REG_OFFSET + 0xc)
+#define NM_RBUFFER_CURRP (NM_RECORD_REG_OFFSET + 0x8)
+
+#define NM_PBUFFER_START (NM_PLAYBACK_REG_OFFSET + 0x4)
+#define NM_PBUFFER_END   (NM_PLAYBACK_REG_OFFSET + 0x14)
+#define NM_PBUFFER_WMARK (NM_PLAYBACK_REG_OFFSET + 0xc)
+#define NM_PBUFFER_CURRP (NM_PLAYBACK_REG_OFFSET + 0x8)
+
+/* A few trivial routines to make it easier to work with the registers
+   on the chip. */
+
+/* This is a common code portion used to fix up the port offsets. */
+#define NM_FIX_PORT \
+  if (port < 1 || port > 2 || card == NULL) \
+      return -1; \
+\
+    if (offset < card->port[port - 1].start_offset \
+	|| offset >= card->port[port - 1].end_offset) { \
+	printk (KERN_ERR "Bad access: port %d, offset 0x%x\n", port, offset); \
+	return -1; \
+    } \
+    offset -= card->port[port - 1].start_offset;
+
+#define DEFwritePortX(X, func) \
+static inline int nm256_writePort##X (struct nm256_info *card,\
+				      int port, int offset, int value)\
+{\
+    u##X __iomem *addr;\
+\
+    if (nm256_debug > 1)\
+        printk (KERN_DEBUG "Writing 0x%x to %d:0x%x\n", value, port, offset);\
+\
+    NM_FIX_PORT;\
+\
+    addr = (u##X __iomem *)(card->port[port - 1].ptr + offset);\
+    func (value, addr);\
+    return 0;\
+}
+
+DEFwritePortX (8, writeb)
+DEFwritePortX (16, writew)
+DEFwritePortX (32, writel)
+
+#define DEFreadPortX(X, func) \
+static inline u##X nm256_readPort##X (struct nm256_info *card,\
+					int port, int offset)\
+{\
+    u##X __iomem *addr;\
+\
+    NM_FIX_PORT\
+\
+    addr = (u##X __iomem *)(card->port[port - 1].ptr + offset);\
+    return func(addr);\
+}
+
+DEFreadPortX (8, readb)
+DEFreadPortX (16, readw)
+DEFreadPortX (32, readl)
+
+static inline int
+nm256_writeBuffer8 (struct nm256_info *card, u8 *src, int port, int offset,
+		      int amt)
+{
+    NM_FIX_PORT;
+    memcpy_toio (card->port[port - 1].ptr + offset, src, amt);
+    return 0;
+}
+
+static inline int
+nm256_readBuffer8 (struct nm256_info *card, u8 *dst, int port, int offset,
+		     int amt)
+{
+    NM_FIX_PORT;
+    memcpy_fromio (dst, card->port[port - 1].ptr + offset, amt);
+    return 0;
+}
+
+/* Returns a non-zero value if we should use the coefficient cache. */
+extern int nm256_cachedCoefficients (struct nm256_info *card);
+
+#endif
+
+/*
+ * Local variables:
+ * c-basic-offset: 4
+ * End:
+ */