Merge branch 'for-3.5' of ../cgroup into block/for-3.5/core-merged

cgroup/for-3.5 contains the following changes which blk-cgroup needs
to proceed with the on-going cleanup.

* Dynamic addition and removal of cftypes to make config/stat file
  handling modular for policies.

* cgroup removal update to not wait for css references to drain to fix
  blkcg removal hang caused by cfq caching cfqgs.

Pull in cgroup/for-3.5 into block/for-3.5/core.  This causes the
following conflicts in block/blk-cgroup.c.

* 761b3ef50e "cgroup: remove cgroup_subsys argument from callbacks"
  conflicts with blkiocg_pre_destroy() addition and blkiocg_attach()
  removal.  Resolved by removing @subsys from all subsys methods.

* 676f7c8f84 "cgroup: relocate cftype and cgroup_subsys definitions in
  controllers" conflicts with ->pre_destroy() and ->attach() updates
  and removal of modular config.  Resolved by dropping forward
  declarations of the methods and applying updates to the relocated
  blkio_subsys.

* 4baf6e3325 "cgroup: convert all non-memcg controllers to the new
  cftype interface" builds upon the previous item.  Resolved by adding
  ->base_cftypes to the relocated blkio_subsys.

Signed-off-by: Tejun Heo <tj@kernel.org>

2 files changed, 47 insertions, 12 deletions

diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index 4fa1dbd8ee83..f7c2bb08055d 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 #include <linux/io.h>
 
 #include <sound/core.h>
@@ -467,15 +468,24 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
 	snd_card_set_dev(card, &pdev->dev);
 
 	if (pdata->dws.dma_dev) {
-		struct dw_dma_slave *dws = &pdata->dws;
 		dma_cap_mask_t mask;
 
-		dws->tx_reg = regs->start + DAC_DATA;
-
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_SLAVE, mask);
 
-		dac->dma.chan = dma_request_channel(mask, filter, dws);
+		dac->dma.chan = dma_request_channel(mask, filter, &pdata->dws);
+		if (dac->dma.chan) {
+			struct dma_slave_config dma_conf = {
+				.dst_addr = regs->start + DAC_DATA,
+				.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+				.src_maxburst = 1,
+				.dst_maxburst = 1,
+				.direction = DMA_MEM_TO_DEV,
+				.device_fc = false,
+			};
+
+			dmaengine_slave_config(dac->dma.chan, &dma_conf);
+		}
 	}
 	if (!pdata->dws.dma_dev || !dac->dma.chan) {
 		dev_dbg(&pdev->dev, "DMA not available\n");
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 61dade698358..115313ef54d6 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/gpio.h>
+#include <linux/types.h>
 #include <linux/io.h>
 
 #include <sound/core.h>
@@ -1014,16 +1015,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
 
 	if (cpu_is_at32ap7000()) {
 		if (pdata->rx_dws.dma_dev) {
-			struct dw_dma_slave *dws = &pdata->rx_dws;
 			dma_cap_mask_t mask;
 
-			dws->rx_reg = regs->start + AC97C_CARHR + 2;
-
 			dma_cap_zero(mask);
 			dma_cap_set(DMA_SLAVE, mask);
 
 			chip->dma.rx_chan = dma_request_channel(mask, filter,
-								dws);
+								&pdata->rx_dws);
+			if (chip->dma.rx_chan) {
+				struct dma_slave_config dma_conf = {
+					.src_addr = regs->start + AC97C_CARHR +
+						2,
+					.src_addr_width =
+						DMA_SLAVE_BUSWIDTH_2_BYTES,
+					.src_maxburst = 1,
+					.dst_maxburst = 1,
+					.direction = DMA_DEV_TO_MEM,
+					.device_fc = false,
+				};
+
+				dmaengine_slave_config(chip->dma.rx_chan,
+						&dma_conf);
+			}
 
 			dev_info(&chip->pdev->dev, "using %s for DMA RX\n",
 				dev_name(&chip->dma.rx_chan->dev->device));
@@ -1031,16 +1044,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
 		}
 
 		if (pdata->tx_dws.dma_dev) {
-			struct dw_dma_slave *dws = &pdata->tx_dws;
 			dma_cap_mask_t mask;
 
-			dws->tx_reg = regs->start + AC97C_CATHR + 2;
-
 			dma_cap_zero(mask);
 			dma_cap_set(DMA_SLAVE, mask);
 
 			chip->dma.tx_chan = dma_request_channel(mask, filter,
-								dws);
+								&pdata->tx_dws);
+			if (chip->dma.tx_chan) {
+				struct dma_slave_config dma_conf = {
+					.dst_addr = regs->start + AC97C_CATHR +
+						2,
+					.dst_addr_width =
+						DMA_SLAVE_BUSWIDTH_2_BYTES,
+					.src_maxburst = 1,
+					.dst_maxburst = 1,
+					.direction = DMA_MEM_TO_DEV,
+					.device_fc = false,
+				};
+
+				dmaengine_slave_config(chip->dma.tx_chan,
+						&dma_conf);
+			}
 
 			dev_info(&chip->pdev->dev, "using %s for DMA TX\n",
 				dev_name(&chip->dma.tx_chan->dev->device));