Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (367 commits)
  ALSA: ASoC: fix a typo in omp-pcm.c
  ASoC: Fix DSP formats in SSM2602 audio codec
  ASoC: Fix incorrect DSP format in OMAP McBSP DAI and affected drivers
  ALSA: hda: fix incorrect mixer index values for 92hd83xx
  ALSA: hda: dinput_mux check
  ALSA: hda - Add quirk for another HP dv7
  ALSA: ASoC - Add missing __devexit annotation to wm8350.c
  ALSA: ASoc: DaVinci: davinci-evm use dsp_b mode
  ALSA: ASoC: DaVinci: i2s, evm, pass same value to codec and cpu_dai
  ALSA: ASoC: tlv320aic3x add dsp_a
  ALSA: ASoC: DaVinci: document I2S limitations
  ALSA: ASoC: DaVinci: davinci-i2s clean up
  ALSA: ASoC: DaVinci: davinci-i2s clean up
  ALSA: ASoC: DaVinci: davinci-i2s add comments to explain polarity
  ALSA: ASoC: DaVinci: davinvi-evm, make requests explicit
  ALSA: ca0106 - disable 44.1kHz capture
  ALSA: ca0106 - Add missing card->private_data initialization
  ALSA: ca0106 - Check ac97 availability at PM
  ALSA: hda - Power up always when no jack detection is available
  ALSA: hda - Fix unused variable warnings in patch_sigmatel.c
  ...

1 files changed, 187 insertions, 0 deletions

diff --git a/sound/aoa/soundbus/i2sbus/interface.h b/sound/aoa/soundbus/i2sbus/interface.h
new file mode 100644
index 000000000000..c6b5f5452d20
--- /dev/null
+++ b/sound/aoa/soundbus/i2sbus/interface.h
@@ -0,0 +1,187 @@
+/*
+ * i2sbus driver -- interface register definitions
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPL v2, can be found in COPYING.
+ */
+#ifndef __I2SBUS_INTERFACE_H
+#define __I2SBUS_INTERFACE_H
+
+/* i2s bus control registers, at least what we know about them */
+
+#define __PAD(m,n) u8 __pad##m[n]
+#define _PAD(line, n) __PAD(line, n)
+#define PAD(n) _PAD(__LINE__, (n))
+struct i2s_interface_regs {
+	__le32 intr_ctl;	/* 0x00 */
+	PAD(12);
+	__le32 serial_format;	/* 0x10 */
+	PAD(12);
+	__le32 codec_msg_out;	/* 0x20 */
+	PAD(12);
+	__le32 codec_msg_in;	/* 0x30 */
+	PAD(12);
+	__le32 frame_count;	/* 0x40 */
+	PAD(12);
+	__le32 frame_match;	/* 0x50 */
+	PAD(12);
+	__le32 data_word_sizes;	/* 0x60 */
+	PAD(12);
+	__le32 peak_level_sel;	/* 0x70 */
+	PAD(12);
+	__le32 peak_level_in0;	/* 0x80 */
+	PAD(12);
+	__le32 peak_level_in1;	/* 0x90 */
+	PAD(12);
+	/* total size: 0x100 bytes */
+}  __attribute__((__packed__));
+
+/* interrupt register is just a bitfield with
+ * interrupt enable and pending bits */
+#define I2S_REG_INTR_CTL		0x00
+#	define I2S_INT_FRAME_COUNT		(1<<31)
+#	define I2S_PENDING_FRAME_COUNT		(1<<30)
+#	define I2S_INT_MESSAGE_FLAG		(1<<29)
+#	define I2S_PENDING_MESSAGE_FLAG		(1<<28)
+#	define I2S_INT_NEW_PEAK			(1<<27)
+#	define I2S_PENDING_NEW_PEAK		(1<<26)
+#	define I2S_INT_CLOCKS_STOPPED		(1<<25)
+#	define I2S_PENDING_CLOCKS_STOPPED	(1<<24)
+#	define I2S_INT_EXTERNAL_SYNC_ERROR	(1<<23)
+#	define I2S_PENDING_EXTERNAL_SYNC_ERROR	(1<<22)
+#	define I2S_INT_EXTERNAL_SYNC_OK		(1<<21)
+#	define I2S_PENDING_EXTERNAL_SYNC_OK	(1<<20)
+#	define I2S_INT_NEW_SAMPLE_RATE		(1<<19)
+#	define I2S_PENDING_NEW_SAMPLE_RATE	(1<<18)
+#	define I2S_INT_STATUS_FLAG		(1<<17)
+#	define I2S_PENDING_STATUS_FLAG		(1<<16)
+
+/* serial format register is more interesting :)
+ * It contains:
+ *  - clock source
+ *  - MClk divisor
+ *  - SClk divisor
+ *  - SClk master flag
+ *  - serial format (sony, i2s 64x, i2s 32x, dav, silabs)
+ *  - external sample frequency interrupt (don't understand)
+ *  - external sample frequency
+ */
+#define I2S_REG_SERIAL_FORMAT		0x10
+/* clock source. You get either 18.432, 45.1584 or 49.1520 MHz */
+#	define I2S_SF_CLOCK_SOURCE_SHIFT	30
+#	define I2S_SF_CLOCK_SOURCE_MASK		(3<<I2S_SF_CLOCK_SOURCE_SHIFT)
+#	define I2S_SF_CLOCK_SOURCE_18MHz	(0<<I2S_SF_CLOCK_SOURCE_SHIFT)
+#	define I2S_SF_CLOCK_SOURCE_45MHz	(1<<I2S_SF_CLOCK_SOURCE_SHIFT)
+#	define I2S_SF_CLOCK_SOURCE_49MHz	(2<<I2S_SF_CLOCK_SOURCE_SHIFT)
+/* also, let's define the exact clock speeds here, in Hz */
+#define I2S_CLOCK_SPEED_18MHz	18432000
+#define I2S_CLOCK_SPEED_45MHz	45158400
+#define I2S_CLOCK_SPEED_49MHz	49152000
+/* MClk is the clock that drives the codec, usually called its 'system clock'.
+ * It is derived by taking only every 'divisor' tick of the clock.
+ */
+#	define I2S_SF_MCLKDIV_SHIFT		24
+#	define I2S_SF_MCLKDIV_MASK		(0x1F<<I2S_SF_MCLKDIV_SHIFT)
+#	define I2S_SF_MCLKDIV_1			(0x14<<I2S_SF_MCLKDIV_SHIFT)
+#	define I2S_SF_MCLKDIV_3			(0x13<<I2S_SF_MCLKDIV_SHIFT)
+#	define I2S_SF_MCLKDIV_5			(0x12<<I2S_SF_MCLKDIV_SHIFT)
+#	define I2S_SF_MCLKDIV_14		(0x0E<<I2S_SF_MCLKDIV_SHIFT)
+#	define I2S_SF_MCLKDIV_OTHER(div)	(((div/2-1)<<I2S_SF_MCLKDIV_SHIFT)&I2S_SF_MCLKDIV_MASK)
+static inline int i2s_sf_mclkdiv(int div, int *out)
+{
+	int d;
+
+	switch(div) {
+	case 1: *out |= I2S_SF_MCLKDIV_1; return 0;
+	case 3: *out |= I2S_SF_MCLKDIV_3; return 0;
+	case 5: *out |= I2S_SF_MCLKDIV_5; return 0;
+	case 14: *out |= I2S_SF_MCLKDIV_14; return 0;
+	default:
+		if (div%2) return -1;
+		d = div/2-1;
+		if (d == 0x14 || d == 0x13 || d == 0x12 || d == 0x0E)
+			return -1;
+		*out |= I2S_SF_MCLKDIV_OTHER(div);
+		return 0;
+	}
+}
+/* SClk is the clock that drives the i2s wire bus. Note that it is
+ * derived from the MClk above by taking only every 'divisor' tick
+ * of MClk.
+ */
+#	define I2S_SF_SCLKDIV_SHIFT		20
+#	define I2S_SF_SCLKDIV_MASK		(0xF<<I2S_SF_SCLKDIV_SHIFT)
+#	define I2S_SF_SCLKDIV_1			(8<<I2S_SF_SCLKDIV_SHIFT)
+#	define I2S_SF_SCLKDIV_3			(9<<I2S_SF_SCLKDIV_SHIFT)
+#	define I2S_SF_SCLKDIV_OTHER(div)	(((div/2-1)<<I2S_SF_SCLKDIV_SHIFT)&I2S_SF_SCLKDIV_MASK)
+static inline int i2s_sf_sclkdiv(int div, int *out)
+{
+	int d;
+
+	switch(div) {
+	case 1: *out |= I2S_SF_SCLKDIV_1; return 0;
+	case 3: *out |= I2S_SF_SCLKDIV_3; return 0;
+	default:
+		if (div%2) return -1;
+		d = div/2-1;
+		if (d == 8 || d == 9) return -1;
+		*out |= I2S_SF_SCLKDIV_OTHER(div);
+		return 0;
+	}
+}
+#	define I2S_SF_SCLK_MASTER		(1<<19)
+/* serial format is the way the data is put to the i2s wire bus */
+#	define I2S_SF_SERIAL_FORMAT_SHIFT	16
+#	define I2S_SF_SERIAL_FORMAT_MASK	(7<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#	define I2S_SF_SERIAL_FORMAT_SONY	(0<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#	define I2S_SF_SERIAL_FORMAT_I2S_64X	(1<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#	define I2S_SF_SERIAL_FORMAT_I2S_32X	(2<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#	define I2S_SF_SERIAL_FORMAT_I2S_DAV	(4<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#	define I2S_SF_SERIAL_FORMAT_I2S_SILABS	(5<<I2S_SF_SERIAL_FORMAT_SHIFT)
+/* unknown */
+#	define I2S_SF_EXT_SAMPLE_FREQ_INT_SHIFT	12
+#	define I2S_SF_EXT_SAMPLE_FREQ_INT_MASK	(0xF<<I2S_SF_SAMPLE_FREQ_INT_SHIFT)
+/* probably gives external frequency? */
+#	define I2S_SF_EXT_SAMPLE_FREQ_MASK	0xFFF
+
+/* used to send codec messages, but how isn't clear */
+#define I2S_REG_CODEC_MSG_OUT		0x20
+
+/* used to receive codec messages, but how isn't clear */
+#define I2S_REG_CODEC_MSG_IN		0x30
+
+/* frame count reg isn't clear to me yet, but probably useful */
+#define I2S_REG_FRAME_COUNT		0x40
+
+/* program to some value, and get interrupt if frame count reaches it */
+#define I2S_REG_FRAME_MATCH		0x50
+
+/* this register describes how the bus transfers data */
+#define I2S_REG_DATA_WORD_SIZES		0x60
+/* number of interleaved input channels */
+#	define I2S_DWS_NUM_CHANNELS_IN_SHIFT	24
+#	define I2S_DWS_NUM_CHANNELS_IN_MASK	(0x1F<<I2S_DWS_NUM_CHANNELS_IN_SHIFT)
+/* word size of input data */
+#	define I2S_DWS_DATA_IN_SIZE_SHIFT	16
+#	define I2S_DWS_DATA_IN_16BIT		(0<<I2S_DWS_DATA_IN_SIZE_SHIFT)
+#	define I2S_DWS_DATA_IN_24BIT		(3<<I2S_DWS_DATA_IN_SIZE_SHIFT)
+/* number of interleaved output channels */
+#	define I2S_DWS_NUM_CHANNELS_OUT_SHIFT	8
+#	define I2S_DWS_NUM_CHANNELS_OUT_MASK	(0x1F<<I2S_DWS_NUM_CHANNELS_OUT_SHIFT)
+/* word size of output data */
+#	define I2S_DWS_DATA_OUT_SIZE_SHIFT	0
+#	define I2S_DWS_DATA_OUT_16BIT		(0<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
+#	define I2S_DWS_DATA_OUT_24BIT		(3<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
+
+
+/* unknown */
+#define I2S_REG_PEAK_LEVEL_SEL		0x70
+
+/* unknown */
+#define I2S_REG_PEAK_LEVEL_IN0		0x80
+
+/* unknown */
+#define I2S_REG_PEAK_LEVEL_IN1		0x90
+
+#endif /* __I2SBUS_INTERFACE_H */