diff options
author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2016-11-25 16:12:00 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-11-28 20:06:54 +0300 |
commit | e5f3a4a56ce2a707b2fb8ce37e4414dcac89c672 (patch) | |
tree | 95a01ceac0cc23920e99113fed1e4693a0461a27 /net/Makefile | |
parent | d936377414fadbafb4d17148d222fe45ca5442d4 (diff) | |
download | linux-e5f3a4a56ce2a707b2fb8ce37e4414dcac89c672.tar.xz |
Documentation: devicetree: clarify usage of the RGMII phy-modes
RGMII requires special RX and/or TX delays depending on the actual
hardware circuit/wiring. These delays can be added by the MAC, the PHY
or the designer of the circuit (the latter means that no delay has to
be added by PHY or MAC).
There are 4 RGMII phy-modes used describe where a delay should be
applied:
- rgmii: the RX and TX delays are either added by the MAC (where the
exact delay is typically configurable, and can be turned off when no
extra delay is needed) or not needed at all (because the hardware
wiring adds the delay already). The PHY should neither add the RX nor
TX delay in this case.
- rgmii-rxid: configures the PHY to enable the RX delay. The MAC should
not add the RX delay in this case.
- rgmii-txid: configures the PHY to enable the TX delay. The MAC should
not add the TX delay in this case.
- rgmii-id: combines rgmii-rxid and rgmii-txid and thus configures the
PHY to enable the RX and TX delays. The MAC should neither add the RX
nor TX delay in this case.
Document these cases in the ethernet.txt documentation to make it clear
when to use each mode.
If applied incorrectly one might end up with MAC and PHY both enabling
for example the TX delay, which breaks ethernet TX traffic on 1000Mbit/s
links.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/Makefile')
0 files changed, 0 insertions, 0 deletions