Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

Pull sparc changes from David S. Miller:
 "This has the generic strncpy_from_user() implementation architectures
  can now use, which we've been developing on linux-arch over the past
  few days.

  For good measure I ran both a 32-bit and a 64-bit glibc testsuite run,
  and the latter of which pointed out an adjustment I needed to make to
  sparc's user_addr_max() definition.  Linus, you were right, STACK_TOP
  was not the right thing to use, even on sparc itself :-)

  From Sam Ravnborg, we have a conversion of sparc32 over to the common
  alloc_thread_info_node(), since the aspect which originally blocked
  our doing so (sun4c) has been removed."

Fix up trivial arch/sparc/Kconfig and lib/Makefile conflicts.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix user_addr_max() definition.
  lib: Sparc's strncpy_from_user is generic enough, move under lib/
  kernel: Move REPEAT_BYTE definition into linux/kernel.h
  sparc: Increase portability of strncpy_from_user() implementation.
  sparc: Optimize strncpy_from_user() zero byte search.
  sparc: Add full proper error handling to strncpy_from_user().
  sparc32: use the common implementation of alloc_thread_info_node()

3 files changed, 151 insertions, 0 deletions

diff --git a/lib/Kconfig b/lib/Kconfig
index 0e25c03939e3..98230ac3db29 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -16,6 +16,9 @@ config BITREVERSE
 config RATIONAL
 	boolean
 
+config GENERIC_STRNCPY_FROM_USER
+	bool
+
 config GENERIC_FIND_FIRST_BIT
 	bool
 
diff --git a/lib/Makefile b/lib/Makefile
index 74290c9e2864..b98df505f335 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -125,6 +125,8 @@ obj-$(CONFIG_CLZ_TAB) += clz_tab.o
 
 obj-$(CONFIG_DDR) += jedec_ddr_data.o
 
+obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/strncpy_from_user.c b/lib/strncpy_from_user.c
new file mode 100644
index 000000000000..c4c09b0e96ba
--- /dev/null
+++ b/lib/strncpy_from_user.c
@@ -0,0 +1,146 @@
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#include <asm/byteorder.h>
+
+static inline long find_zero(unsigned long mask)
+{
+	long byte = 0;
+
+#ifdef __BIG_ENDIAN
+#ifdef CONFIG_64BIT
+	if (mask >> 32)
+		mask >>= 32;
+	else
+		byte = 4;
+#endif
+	if (mask >> 16)
+		mask >>= 16;
+	else
+		byte += 2;
+	return (mask >> 8) ? byte : byte + 1;
+#else
+#ifdef CONFIG_64BIT
+	if (!((unsigned int) mask)) {
+		mask >>= 32;
+		byte = 4;
+	}
+#endif
+	if (!(mask & 0xffff)) {
+		mask >>= 16;
+		byte += 2;
+	}
+	return (mask & 0xff) ? byte : byte + 1;
+#endif
+}
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#define IS_UNALIGNED(src, dst)	0
+#else
+#define IS_UNALIGNED(src, dst)	\
+	(((long) dst | (long) src) & (sizeof(long) - 1))
+#endif
+
+/*
+ * Do a strncpy, return length of string without final '\0'.
+ * 'count' is the user-supplied count (return 'count' if we
+ * hit it), 'max' is the address space maximum (and we return
+ * -EFAULT if we hit it).
+ */
+static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, unsigned long max)
+{
+	const unsigned long high_bits = REPEAT_BYTE(0xfe) + 1;
+	const unsigned long low_bits = REPEAT_BYTE(0x7f);
+	long res = 0;
+
+	/*
+	 * Truncate 'max' to the user-specified limit, so that
+	 * we only have one limit we need to check in the loop
+	 */
+	if (max > count)
+		max = count;
+
+	if (IS_UNALIGNED(src, dst))
+		goto byte_at_a_time;
+
+	while (max >= sizeof(unsigned long)) {
+		unsigned long c, v, rhs;
+
+		/* Fall back to byte-at-a-time if we get a page fault */
+		if (unlikely(__get_user(c,(unsigned long __user *)(src+res))))
+			break;
+		rhs = c | low_bits;
+		v = (c + high_bits) & ~rhs;
+		*(unsigned long *)(dst+res) = c;
+		if (v) {
+			v = (c & low_bits) + low_bits;
+			v = ~(v | rhs);
+			return res + find_zero(v);
+		}
+		res += sizeof(unsigned long);
+		max -= sizeof(unsigned long);
+	}
+
+byte_at_a_time:
+	while (max) {
+		char c;
+
+		if (unlikely(__get_user(c,src+res)))
+			return -EFAULT;
+		dst[res] = c;
+		if (!c)
+			return res;
+		res++;
+		max--;
+	}
+
+	/*
+	 * Uhhuh. We hit 'max'. But was that the user-specified maximum
+	 * too? If so, that's ok - we got as much as the user asked for.
+	 */
+	if (res >= count)
+		return res;
+
+	/*
+	 * Nope: we hit the address space limit, and we still had more
+	 * characters the caller would have wanted. That's an EFAULT.
+	 */
+	return -EFAULT;
+}
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+long strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	unsigned long max_addr, src_addr;
+
+	if (unlikely(count <= 0))
+		return 0;
+
+	max_addr = user_addr_max();
+	src_addr = (unsigned long)src;
+	if (likely(src_addr < max_addr)) {
+		unsigned long max = max_addr - src_addr;
+		return do_strncpy_from_user(dst, src, count, max);
+	}
+	return -EFAULT;
+}
+EXPORT_SYMBOL(strncpy_from_user);