lib/xz: Add MicroLZMA decoder

MicroLZMA is a yet another header format variant where the first
byte of a raw LZMA stream (without the end of stream marker) has
been replaced with a bitwise-negation of the lc/lp/pb properties
byte. MicroLZMA was created to be used in EROFS but can be used
by other things too where wasting minimal amount of space for
headers is important.

This is implemented using most of the LZMA2 code as is so the
amount of new code is small. The API has a few extra features
compared to the XZ decoder. On the other hand, the API lacks
XZ_BUF_ERROR support which is important to take into account
when using this API.

MicroLZMA doesn't support BCJ filters. In theory they could be
added later as there are many unused/reserved values for the
first byte of the compressed stream but in practice it is
somewhat unlikely to happen due to a few implementation reasons.

Link: https://lore.kernel.org/r/20211010213145.17462-5-xiang@kernel.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

4 files changed, 178 insertions, 3 deletions

diff --git a/lib/xz/Kconfig b/lib/xz/Kconfig
index 5cb50245a878..adce22ac18d6 100644
--- a/lib/xz/Kconfig
+++ b/lib/xz/Kconfig
@@ -39,6 +39,19 @@ config XZ_DEC_SPARC
 	default y
 	select XZ_DEC_BCJ
 
+config XZ_DEC_MICROLZMA
+	bool "MicroLZMA decoder"
+	default n
+	help
+	  MicroLZMA is a header format variant where the first byte
+	  of a raw LZMA stream (without the end of stream marker) has
+	  been replaced with a bitwise-negation of the lc/lp/pb
+	  properties byte. MicroLZMA was created to be used in EROFS
+	  but can be used by other things too where wasting minimal
+	  amount of space for headers is important.
+
+	  Unless you know that you need this, say N.
+
 endif
 
 config XZ_DEC_BCJ
diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c
index 22b789645ce5..46b186d7eb45 100644
--- a/lib/xz/xz_dec_lzma2.c
+++ b/lib/xz/xz_dec_lzma2.c
@@ -248,6 +248,10 @@ struct lzma2_dec {
 	 * before the first LZMA chunk.
 	 */
 	bool need_props;
+
+#ifdef XZ_DEC_MICROLZMA
+	bool pedantic_microlzma;
+#endif
 };
 
 struct xz_dec_lzma2 {
@@ -419,6 +423,12 @@ static void dict_uncompressed(struct dictionary *dict, struct xz_buf *b,
 	}
 }
 
+#ifdef XZ_DEC_MICROLZMA
+#	define DICT_FLUSH_SUPPORTS_SKIPPING true
+#else
+#	define DICT_FLUSH_SUPPORTS_SKIPPING false
+#endif
+
 /*
  * Flush pending data from dictionary to b->out. It is assumed that there is
  * enough space in b->out. This is guaranteed because caller uses dict_limit()
@@ -437,9 +447,14 @@ static uint32_t dict_flush(struct dictionary *dict, struct xz_buf *b)
 		 * decompression because in multi-call mode dict->buf
 		 * has been allocated by us in this file; it's not
 		 * provided by the caller like in single-call mode.
+		 *
+		 * With MicroLZMA, b->out can be NULL to skip bytes that
+		 * the caller doesn't need. This cannot be done with XZ
+		 * because it would break BCJ filters.
 		 */
-		memcpy(b->out + b->out_pos, dict->buf + dict->start,
-				copy_size);
+		if (!DICT_FLUSH_SUPPORTS_SKIPPING || b->out != NULL)
+			memcpy(b->out + b->out_pos, dict->buf + dict->start,
+					copy_size);
 	}
 
 	dict->start = dict->pos;
@@ -1190,3 +1205,140 @@ XZ_EXTERN void xz_dec_lzma2_end(struct xz_dec_lzma2 *s)
 
 	kfree(s);
 }
+
+#ifdef XZ_DEC_MICROLZMA
+/* This is a wrapper struct to have a nice struct name in the public API. */
+struct xz_dec_microlzma {
+	struct xz_dec_lzma2 s;
+};
+
+enum xz_ret xz_dec_microlzma_run(struct xz_dec_microlzma *s_ptr,
+				 struct xz_buf *b)
+{
+	struct xz_dec_lzma2 *s = &s_ptr->s;
+
+	/*
+	 * sequence is SEQ_PROPERTIES before the first input byte,
+	 * SEQ_LZMA_PREPARE until a total of five bytes have been read,
+	 * and SEQ_LZMA_RUN for the rest of the input stream.
+	 */
+	if (s->lzma2.sequence != SEQ_LZMA_RUN) {
+		if (s->lzma2.sequence == SEQ_PROPERTIES) {
+			/* One byte is needed for the props. */
+			if (b->in_pos >= b->in_size)
+				return XZ_OK;
+
+			/*
+			 * Don't increment b->in_pos here. The same byte is
+			 * also passed to rc_read_init() which will ignore it.
+			 */
+			if (!lzma_props(s, ~b->in[b->in_pos]))
+				return XZ_DATA_ERROR;
+
+			s->lzma2.sequence = SEQ_LZMA_PREPARE;
+		}
+
+		/*
+		 * xz_dec_microlzma_reset() doesn't validate the compressed
+		 * size so we do it here. We have to limit the maximum size
+		 * to avoid integer overflows in lzma2_lzma(). 3 GiB is a nice
+		 * round number and much more than users of this code should
+		 * ever need.
+		 */
+		if (s->lzma2.compressed < RC_INIT_BYTES
+				|| s->lzma2.compressed > (3U << 30))
+			return XZ_DATA_ERROR;
+
+		if (!rc_read_init(&s->rc, b))
+			return XZ_OK;
+
+		s->lzma2.compressed -= RC_INIT_BYTES;
+		s->lzma2.sequence = SEQ_LZMA_RUN;
+
+		dict_reset(&s->dict, b);
+	}
+
+	/* This is to allow increasing b->out_size between calls. */
+	if (DEC_IS_SINGLE(s->dict.mode))
+		s->dict.end = b->out_size - b->out_pos;
+
+	while (true) {
+		dict_limit(&s->dict, min_t(size_t, b->out_size - b->out_pos,
+					   s->lzma2.uncompressed));
+
+		if (!lzma2_lzma(s, b))
+			return XZ_DATA_ERROR;
+
+		s->lzma2.uncompressed -= dict_flush(&s->dict, b);
+
+		if (s->lzma2.uncompressed == 0) {
+			if (s->lzma2.pedantic_microlzma) {
+				if (s->lzma2.compressed > 0 || s->lzma.len > 0
+						|| !rc_is_finished(&s->rc))
+					return XZ_DATA_ERROR;
+			}
+
+			return XZ_STREAM_END;
+		}
+
+		if (b->out_pos == b->out_size)
+			return XZ_OK;
+
+		if (b->in_pos == b->in_size
+				&& s->temp.size < s->lzma2.compressed)
+			return XZ_OK;
+	}
+}
+
+struct xz_dec_microlzma *xz_dec_microlzma_alloc(enum xz_mode mode,
+						uint32_t dict_size)
+{
+	struct xz_dec_microlzma *s;
+
+	/* Restrict dict_size to the same range as in the LZMA2 code. */
+	if (dict_size < 4096 || dict_size > (3U << 30))
+		return NULL;
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (s == NULL)
+		return NULL;
+
+	s->s.dict.mode = mode;
+	s->s.dict.size = dict_size;
+
+	if (DEC_IS_MULTI(mode)) {
+		s->s.dict.end = dict_size;
+
+		s->s.dict.buf = vmalloc(dict_size);
+		if (s->s.dict.buf == NULL) {
+			kfree(s);
+			return NULL;
+		}
+	}
+
+	return s;
+}
+
+void xz_dec_microlzma_reset(struct xz_dec_microlzma *s, uint32_t comp_size,
+			    uint32_t uncomp_size, int uncomp_size_is_exact)
+{
+	/*
+	 * comp_size is validated in xz_dec_microlzma_run().
+	 * uncomp_size can safely be anything.
+	 */
+	s->s.lzma2.compressed = comp_size;
+	s->s.lzma2.uncompressed = uncomp_size;
+	s->s.lzma2.pedantic_microlzma = uncomp_size_is_exact;
+
+	s->s.lzma2.sequence = SEQ_PROPERTIES;
+	s->s.temp.size = 0;
+}
+
+void xz_dec_microlzma_end(struct xz_dec_microlzma *s)
+{
+	if (DEC_IS_MULTI(s->s.dict.mode))
+		vfree(s->s.dict.buf);
+
+	kfree(s);
+}
+#endif
diff --git a/lib/xz/xz_dec_syms.c b/lib/xz/xz_dec_syms.c
index 32eb3c03aede..61098c67a413 100644
--- a/lib/xz/xz_dec_syms.c
+++ b/lib/xz/xz_dec_syms.c
@@ -15,8 +15,15 @@ EXPORT_SYMBOL(xz_dec_reset);
 EXPORT_SYMBOL(xz_dec_run);
 EXPORT_SYMBOL(xz_dec_end);
 
+#ifdef CONFIG_XZ_DEC_MICROLZMA
+EXPORT_SYMBOL(xz_dec_microlzma_alloc);
+EXPORT_SYMBOL(xz_dec_microlzma_reset);
+EXPORT_SYMBOL(xz_dec_microlzma_run);
+EXPORT_SYMBOL(xz_dec_microlzma_end);
+#endif
+
 MODULE_DESCRIPTION("XZ decompressor");
-MODULE_VERSION("1.0");
+MODULE_VERSION("1.1");
 MODULE_AUTHOR("Lasse Collin <lasse.collin@tukaani.org> and Igor Pavlov");
 
 /*
diff --git a/lib/xz/xz_private.h b/lib/xz/xz_private.h
index 09360ebb510e..bf1e94ec7873 100644
--- a/lib/xz/xz_private.h
+++ b/lib/xz/xz_private.h
@@ -37,6 +37,9 @@
 #		ifdef CONFIG_XZ_DEC_SPARC
 #			define XZ_DEC_SPARC
 #		endif
+#		ifdef CONFIG_XZ_DEC_MICROLZMA
+#			define XZ_DEC_MICROLZMA
+#		endif
 #		define memeq(a, b, size) (memcmp(a, b, size) == 0)
 #		define memzero(buf, size) memset(buf, 0, size)
 #	endif