summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-07 21:17:30 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-07 21:17:30 +0400
commitc29aa153ef0469cddf0146d41ce6494bd76be78b (patch)
treeb49af4e6cf54e9988dd45640a86c4de7f49ddf6d /include
parent2b3a8fd735f86ebeb2b9d061054003000c36b654 (diff)
parent4a4163caccae97a23d97c29032664ee7b7a498d0 (diff)
downloadlinux-c29aa153ef0469cddf0146d41ce6494bd76be78b.tar.xz
Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: - A few SPI NOR ID definitions - Kill the NAND "max pagesize" restriction - Fix some x16 bus-width NAND support - Add NAND JEDEC parameter page support - DT bindings for NAND ECC - GPMI NAND updates (subpage reads) - More OMAP NAND refactoring - New STMicro SPI NOR driver (now in 40 patches!) - A few other random bugfixes * tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits) Fix index regression in nand_read_subpage mtd: diskonchip: mem resource name is not optional mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH mtd: nand: fix GET/SET_FEATURES address on 16-bit devices mtd: omap2: Use devm_ioremap_resource() mtd: denali_dt: Use devm_ioremap_resource() mtd: devices: elm: update DRIVER_NAME as "omap-elm" mtd: devices: elm: configure parallel channels based on ecc_steps mtd: devices: elm: clean elm_load_syndrome mtd: devices: elm: check for hardware engine's design constraints mtd: st_spi_fsm: Succinctly reorganise .remove() mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M" mtd: st_spi_fsm: Avoid duplicating MTD core code mtd: st_spi_fsm: Remove useless consts from function arguments mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/mtd/mtd.h16
-rw-r--r--include/linux/mtd/nand.h135
-rw-r--r--include/linux/of_mtd.h12
-rw-r--r--include/linux/platform_data/elm.h10
-rw-r--r--include/linux/platform_data/mtd-nand-s3c2410.h8
5 files changed, 147 insertions, 34 deletions
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 8cc0e2fb6894..a1b0b4c8fd79 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -204,12 +204,12 @@ struct mtd_info {
struct mtd_oob_ops *ops);
int (*_write_oob) (struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
- int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+ int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf);
int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf);
- int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+ int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf);
int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf);
int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
@@ -278,12 +278,12 @@ static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
return mtd->_write_oob(mtd, to, ops);
}
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+ struct otp_info *buf);
int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+ struct otp_info *buf);
int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 32f8612469d8..450d61ec7f06 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -52,14 +52,6 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
#define NAND_MAX_CHIPS 8
/*
- * This constant declares the max. oobsize / page, which
- * is supported now. If you add a chip with bigger oobsize/page
- * adjust this accordingly.
- */
-#define NAND_MAX_OOBSIZE 744
-#define NAND_MAX_PAGESIZE 8192
-
-/*
* Constants for hardware specific CLE/ALE/NCE function
*
* These are bits which can be or'ed to set/clear multiple
@@ -350,6 +342,84 @@ struct nand_onfi_vendor_micron {
u8 param_revision;
} __packed;
+struct jedec_ecc_info {
+ u8 ecc_bits;
+ u8 codeword_size;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 reserved[2];
+} __packed;
+
+/* JEDEC features */
+#define JEDEC_FEATURE_16_BIT_BUS (1 << 0)
+
+struct nand_jedec_params {
+ /* rev info and features block */
+ /* 'J' 'E' 'S' 'D' */
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ u8 opt_cmd[3];
+ __le16 sec_cmd;
+ u8 num_of_param_pages;
+ u8 reserved0[18];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id[6];
+ u8 reserved1[10];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ u8 reserved2[6];
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ u8 programs_per_page;
+ u8 multi_plane_addr;
+ u8 multi_plane_op_attr;
+ u8 reserved3[38];
+
+ /* electrical parameter block */
+ __le16 async_sdr_speed_grade;
+ __le16 toggle_ddr_speed_grade;
+ __le16 sync_ddr_speed_grade;
+ u8 async_sdr_features;
+ u8 toggle_ddr_features;
+ u8 sync_ddr_features;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_r_multi_plane;
+ __le16 t_ccs;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ __le16 clk_pin_capacitance_typ;
+ u8 driver_strength_support;
+ __le16 t_ald;
+ u8 reserved4[36];
+
+ /* ECC and endurance block */
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ struct jedec_ecc_info ecc_info[4];
+ u8 reserved5[29];
+
+ /* reserved */
+ u8 reserved6[148];
+
+ /* vendor */
+ __le16 vendor_rev_num;
+ u8 reserved7[88];
+
+ /* CRC for Parameter Page */
+ __le16 crc;
+} __packed;
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
@@ -418,7 +488,7 @@ struct nand_ecc_ctrl {
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offs, uint32_t len, uint8_t *buf);
+ uint32_t offs, uint32_t len, uint8_t *buf, int page);
int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, uint32_t data_len,
const uint8_t *data_buf, int oob_required);
@@ -435,17 +505,17 @@ struct nand_ecc_ctrl {
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ECC
- * @ecccode: buffer for ECC read from flash
- * @databuf: buffer for data - dynamically sized
+ * @ecccalc: buffer pointer for calculated ECC, size is oobsize.
+ * @ecccode: buffer pointer for ECC read from flash, size is oobsize.
+ * @databuf: buffer pointer for data, size is (page size + oobsize).
*
* Do not change the order of buffers. databuf and oobrbuf must be in
* consecutive order.
*/
struct nand_buffers {
- uint8_t ecccalc[NAND_MAX_OOBSIZE];
- uint8_t ecccode[NAND_MAX_OOBSIZE];
- uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
+ uint8_t *ecccalc;
+ uint8_t *ecccode;
+ uint8_t *databuf;
};
/**
@@ -523,8 +593,12 @@ struct nand_buffers {
* @subpagesize: [INTERN] holds the subpagesize
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
+ * @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
+ * non 0 if JEDEC supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
+ * @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is
+ * supported, 0 otherwise.
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
@@ -597,7 +671,11 @@ struct nand_chip {
int badblockbits;
int onfi_version;
- struct nand_onfi_params onfi_params;
+ int jedec_version;
+ union {
+ struct nand_onfi_params onfi_params;
+ struct nand_jedec_params jedec_params;
+ };
int read_retries;
@@ -840,4 +918,29 @@ static inline bool nand_is_slc(struct nand_chip *chip)
{
return chip->bits_per_cell == 1;
}
+
+/**
+ * Check if the opcode's address should be sent only on the lower 8 bits
+ * @command: opcode to check
+ */
+static inline int nand_opcode_8bits(unsigned int command)
+{
+ switch (command) {
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
+ case NAND_CMD_GET_FEATURES:
+ case NAND_CMD_SET_FEATURES:
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+/* return the supported JEDEC features. */
+static inline int jedec_feature(struct nand_chip *chip)
+{
+ return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
+ : 0;
+}
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
index cb32d9c1e8dc..e266caa36402 100644
--- a/include/linux/of_mtd.h
+++ b/include/linux/of_mtd.h
@@ -13,6 +13,8 @@
#include <linux/of.h>
int of_get_nand_ecc_mode(struct device_node *np);
+int of_get_nand_ecc_step_size(struct device_node *np);
+int of_get_nand_ecc_strength(struct device_node *np);
int of_get_nand_bus_width(struct device_node *np);
bool of_get_nand_on_flash_bbt(struct device_node *np);
@@ -23,6 +25,16 @@ static inline int of_get_nand_ecc_mode(struct device_node *np)
return -ENOSYS;
}
+static inline int of_get_nand_ecc_step_size(struct device_node *np)
+{
+ return -ENOSYS;
+}
+
+static inline int of_get_nand_ecc_strength(struct device_node *np)
+{
+ return -ENOSYS;
+}
+
static inline int of_get_nand_bus_width(struct device_node *np)
{
return -ENOSYS;
diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h
index bf0a83b7ed9d..4edb40676b3f 100644
--- a/include/linux/platform_data/elm.h
+++ b/include/linux/platform_data/elm.h
@@ -26,13 +26,6 @@ enum bch_ecc {
/* ELM support 8 error syndrome process */
#define ERROR_VECTOR_MAX 8
-#define BCH8_ECC_OOB_BYTES 13
-#define BCH4_ECC_OOB_BYTES 7
-/* RBL requires 14 byte even though BCH8 uses only 13 byte */
-#define BCH8_SIZE (BCH8_ECC_OOB_BYTES + 1)
-/* Uses 1 extra byte to handle erased pages */
-#define BCH4_SIZE (BCH4_ECC_OOB_BYTES + 1)
-
/**
* struct elm_errorvec - error vector for elm
* @error_reported: set true for vectors error is reported
@@ -50,5 +43,6 @@ struct elm_errorvec {
void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
struct elm_errorvec *err_vec);
-int elm_config(struct device *dev, enum bch_ecc bch_type);
+int elm_config(struct device *dev, enum bch_ecc bch_type,
+ int ecc_steps, int ecc_step_size, int ecc_syndrome_size);
#endif /* __ELM_H */
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index b64115fa93a4..36bb92172f47 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
+/*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
@@ -10,6 +9,9 @@
* published by the Free Software Foundation.
*/
+#ifndef __MTD_NAND_S3C2410_H
+#define __MTD_NAND_S3C2410_H
+
/**
* struct s3c2410_nand_set - define a set of one or more nand chips
* @disable_ecc: Entirely disable ECC - Dangerous
@@ -65,3 +67,5 @@ struct s3c2410_platform_nand {
* it with the s3c_device_nand. This allows @nand to be __initdata.
*/
extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
+
+#endif /*__MTD_NAND_S3C2410_H */