Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fixes from Damien Le Moal:
 "A larger than usual set of fixes for 6.6-rc4 due to the unexpected
  number of fixes needed to address ATA disks suspend/resume issues.

  In more detail:

   - Add missing additionalProperties on child nodes to the pata-common
     DT bindings (Rob)

   - Fix handling of the REPORT SUPPORTED OPERATION CODES command to
     ignore reserved bits (Niklas)

   - Increase port multiplier soft reset timeout to accomodate slow
     devices and avoid issues on wakeup (Matthias)

   - A couple of minor code fixes to avoid compilation warnings in
     libata-core and libata-eh (me)

   - Many patches from me to address suspend/resume issues, and in
     particular a potential deadlock on resume due to the SCSI disk
     driver resume operation not being synchronized with libata EH port
     resume handling.

     This is addressed by changing the scsi disk driver disk start/stop
     control to allow libata to execute disk suspend (spin down) and
     resume (spin up) on its own during system suspend/resume. Runtime
     suspend/resume control remains with the SCSI disk driver.

     Other fixes include:
      - Fix libata power management request issuing to avoid races
      - Establish a link between ATA ports and SCSI devices to order PM
        operations
      - Fix device removal to avoid issues with driver rmmod removal
      - Fix synchronization of libata device rescan and SCSI disk resume
        operation
      - Remove libsas PM operations as suspend/resume is handled
        directly by the sas controller resume
      - Fix the SCSI disk driver to not issue commands to suspended
        disks, thus avoiding potential system lock-up on resume"

* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  scsi: sd: Do not issue commands to suspended disks on shutdown
  ata: libata-core: Do not register PM operations for SAS ports
  ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  scsi: Do not attempt to rescan suspended devices
  ata: libata-scsi: Disable scsi device manage_system_start_stop
  scsi: sd: Differentiate system and runtime start/stop management
  ata: libata-scsi: link ata port and scsi device
  ata: libata-core: Fix port and device removal
  ata: libata-core: Fix ata_port_request_pm() locking
  ata: libata-sata: increase PMP SRST timeout to 10s
  ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

3 files changed, 12 insertions, 5 deletions

diff --git a/include/linux/libata.h b/include/linux/libata.h
index bf4913f4d7ac..2a7d2af0ed80 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -192,6 +192,7 @@ enum {
 	ATA_PFLAG_UNLOADING	= (1 << 9), /* driver is being unloaded */
 	ATA_PFLAG_UNLOADED	= (1 << 10), /* driver is unloaded */
 
+	ATA_PFLAG_RESUMING	= (1 << 16),  /* port is being resumed */
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
@@ -259,7 +260,7 @@ enum {
 	 * advised to wait only for the following duration before
 	 * doing SRST.
 	 */
-	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
+	ATA_TMOUT_PMP_SRST_WAIT	= 10000,
 
 	/* When the LPM policy is set to ATA_LPM_MAX_POWER, there might
 	 * be a spurious PHY event, so ignore the first PHY event that
@@ -318,9 +319,10 @@ enum {
 	ATA_EH_ENABLE_LINK	= (1 << 3),
 	ATA_EH_PARK		= (1 << 5), /* unload heads and stop I/O */
 	ATA_EH_GET_SUCCESS_SENSE = (1 << 6), /* Get sense data for successful cmd */
+	ATA_EH_SET_ACTIVE	= (1 << 7), /* Set a device to active power mode */
 
 	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_PARK |
-				  ATA_EH_GET_SUCCESS_SENSE,
+				  ATA_EH_GET_SUCCESS_SENSE | ATA_EH_SET_ACTIVE,
 	ATA_EH_ALL_ACTIONS	= ATA_EH_REVALIDATE | ATA_EH_RESET |
 				  ATA_EH_ENABLE_LINK,
 
@@ -357,7 +359,7 @@ enum {
 	/* This should match the actual table size of
 	 * ata_eh_cmd_timeout_table in libata-eh.c.
 	 */
-	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7,
+	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8,
 
 	/* Horkage types. May be set by libata or controller on drives
 	   (some horkage may be drive/controller pair dependent */
@@ -1148,6 +1150,7 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
 			      struct block_device *bdev,
 			      sector_t capacity, int geom[]);
 extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
+extern int ata_scsi_slave_alloc(struct scsi_device *sdev);
 extern int ata_scsi_slave_config(struct scsi_device *sdev);
 extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
@@ -1396,6 +1399,7 @@ extern const struct attribute_group *ata_common_sdev_groups[];
 	.this_id		= ATA_SHT_THIS_ID,		\
 	.emulated		= ATA_SHT_EMULATED,		\
 	.proc_name		= drv_name,			\
+	.slave_alloc		= ata_scsi_slave_alloc,		\
 	.slave_destroy		= ata_scsi_slave_destroy,	\
 	.bios_param		= ata_std_bios_param,		\
 	.unlock_native_capacity	= ata_scsi_unlock_native_capacity,\
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index b9230b6add04..fd41fdac0a8e 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -161,6 +161,10 @@ struct scsi_device {
 				 * pass settings from slave_alloc to scsi
 				 * core. */
 	unsigned int eh_timeout; /* Error handling timeout */
+
+	bool manage_system_start_stop; /* Let HLD (sd) manage system start/stop */
+	bool manage_runtime_start_stop; /* Let HLD (sd) manage runtime start/stop */
+
 	unsigned removable:1;
 	unsigned changed:1;	/* Data invalid due to media change */
 	unsigned busy:1;	/* Used to prevent races */
@@ -193,7 +197,6 @@ struct scsi_device {
 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 	unsigned no_start_on_add:1;	/* do not issue start on add */
 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
-	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
 	unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */
 	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 49f768d0ff37..4c2dc8150c6d 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -764,7 +764,7 @@ scsi_template_proc_dir(const struct scsi_host_template *sht);
 #define scsi_template_proc_dir(sht) NULL
 #endif
 extern void scsi_scan_host(struct Scsi_Host *);
-extern void scsi_rescan_device(struct scsi_device *);
+extern int scsi_rescan_device(struct scsi_device *sdev);
 extern void scsi_remove_host(struct Scsi_Host *);
 extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
 extern int scsi_host_busy(struct Scsi_Host *shost);