Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

3 files changed, 109 insertions, 21 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 52e15e079c61..0aa831467493 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -472,7 +472,7 @@ static inline int ieee80211_is_cfendack(__le16 fc)
 }
 
 /**
- * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC
+ * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
  * @fc: frame control bytes in little-endian byteorder
  */
 static inline int ieee80211_is_nullfunc(__le16 fc)
@@ -481,6 +481,16 @@ static inline int ieee80211_is_nullfunc(__le16 fc)
 	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
 }
 
+/**
+ * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_qos_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+}
+
 struct ieee80211s_hdr {
 	u8 flags;
 	u8 ttl;
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 23c3f3d97779..9d3d86aaccbb 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -80,7 +80,7 @@ struct ieee80211_radiotap_header {
 				 * Additional extensions are made
 				 * by setting bit 31.
 				 */
-};
+} __packed;
 
 /* Name                                 Data type    Units
  * ----                                 ---------    -----
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c42c4a820b89..2c10eac637d8 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -494,7 +494,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame.
  *	Use together with %RX_FLAG_MMIC_STRIPPED.
  * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
- * @RX_FLAG_RADIOTAP: This frame starts with a radiotap header.
  * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
  *	verification has been done by the hardware.
  * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
@@ -515,7 +514,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR	= 1<<0,
 	RX_FLAG_DECRYPTED	= 1<<1,
-	RX_FLAG_RADIOTAP	= 1<<2,
 	RX_FLAG_MMIC_STRIPPED	= 1<<3,
 	RX_FLAG_IV_STRIPPED	= 1<<4,
 	RX_FLAG_FAILED_FCS_CRC	= 1<<5,
@@ -554,7 +552,7 @@ struct ieee80211_rx_status {
 	int freq;
 	int signal;
 	int noise;
-	int qual;
+	int __deprecated qual;
 	int antenna;
 	int rate_idx;
 	int flag;
@@ -565,7 +563,9 @@ struct ieee80211_rx_status {
  *
  * Flags to define PHY configuration options
  *
- * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
+ * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this
+ *	to determine for example whether to calculate timestamps for packets
+ *	or not, do not use instead of filter flags!
  * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
  * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
  *	the driver should be prepared to handle configuration requests but
@@ -574,7 +574,7 @@ struct ieee80211_rx_status {
  *	it can also be unset in that case when monitor interfaces are active.
  */
 enum ieee80211_conf_flags {
-	IEEE80211_CONF_RADIOTAP		= (1<<0),
+	IEEE80211_CONF_MONITOR		= (1<<0),
 	IEEE80211_CONF_PS		= (1<<1),
 	IEEE80211_CONF_IDLE		= (1<<2),
 };
@@ -584,7 +584,7 @@ enum ieee80211_conf_flags {
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
- * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
+ * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed
  * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
@@ -593,7 +593,7 @@ enum ieee80211_conf_flags {
  */
 enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
-	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
+	IEEE80211_CONF_CHANGE_MONITOR		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
 	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
 	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
@@ -1661,8 +1661,7 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw);
  * ieee80211_rx - receive frame
  *
  * Use this function to hand received frames to mac80211. The receive
- * buffer in @skb must start with an IEEE 802.11 header or a radiotap
- * header if %RX_FLAG_RADIOTAP is set in the @status flags.
+ * buffer in @skb must start with an IEEE 802.11 header.
  *
  * This function may not be called in IRQ context. Calls to this function
  * for a single hardware must be synchronized against each other. Calls to
@@ -1744,19 +1743,45 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
 				 struct sk_buff *skb);
 
 /**
- * ieee80211_beacon_get - beacon generation function
+ * ieee80211_beacon_get_tim - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @tim_offset: pointer to variable that will receive the TIM IE offset.
+ *	Set to 0 if invalid (in non-AP modes).
+ * @tim_length: pointer to variable that will receive the TIM IE length,
+ *	(including the ID and length bytes!).
+ *	Set to 0 if invalid (in non-AP modes).
+ *
+ * If the driver implements beaconing modes, it must use this function to
+ * obtain the beacon frame/template.
  *
  * If the beacon frames are generated by the host system (i.e., not in
- * hardware/firmware), the low-level driver uses this function to receive
- * the next beacon frame from the 802.11 code. The low-level is responsible
- * for calling this function before beacon data is needed (e.g., based on
- * hardware interrupt). Returned skb is used only once and low-level driver
- * is responsible for freeing it.
+ * hardware/firmware), the driver uses this function to get each beacon
+ * frame from mac80211 -- it is responsible for calling this function
+ * before the beacon is needed (e.g. based on hardware interrupt).
+ *
+ * If the beacon frames are generated by the device, then the driver
+ * must use the returned beacon as the template and change the TIM IE
+ * according to the current DTIM parameters/TIM bitmap.
+ *
+ * The driver is responsible for freeing the returned skb.
+ */
+struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 u16 *tim_offset, u16 *tim_length);
+
+/**
+ * ieee80211_beacon_get - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ *
+ * See ieee80211_beacon_get_tim().
  */
-struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif);
+static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
+						   struct ieee80211_vif *vif)
+{
+	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
+}
 
 /**
  * ieee80211_rts_get - RTS frame generation function
@@ -2081,16 +2106,69 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
 /**
  * ieee80211_find_sta - find a station
  *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @vif: virtual interface to look for station on
  * @addr: station's address
  *
  * This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  */
-struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
+struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
 					 const u8 *addr);
 
 /**
+ * ieee80211_find_sta_by_hw - find a station on hardware
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @addr: station's address
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ *
+ * NOTE: This function should not be used! When mac80211 is converted
+ *	 internally to properly keep track of stations on multiple
+ *	 virtual interfaces, it will not always know which station to
+ *	 return here since a single address might be used by multiple
+ *	 logical stations (e.g. consider a station connecting to another
+ *	 BSSID on the same AP hardware without disconnecting first).
+ *
+ * DO NOT USE THIS FUNCTION.
+ */
+struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
+					       const u8 *addr);
+
+/**
+ * ieee80211_sta_block_awake - block station from waking up
+ * @hw: the hardware
+ * @pubsta: the station
+ * @block: whether to block or unblock
+ *
+ * Some devices require that all frames that are on the queues
+ * for a specific station that went to sleep are flushed before
+ * a poll response or frames after the station woke up can be
+ * delivered to that it. Note that such frames must be rejected
+ * by the driver as filtered, with the appropriate status flag.
+ *
+ * This function allows implementing this mode in a race-free
+ * manner.
+ *
+ * To do this, a driver must keep track of the number of frames
+ * still enqueued for a specific station. If this number is not
+ * zero when the station goes to sleep, the driver must call
+ * this function to force mac80211 to consider the station to
+ * be asleep regardless of the station's actual state. Once the
+ * number of outstanding frames reaches zero, the driver must
+ * call this function again to unblock the station. That will
+ * cause mac80211 to be able to send ps-poll responses, and if
+ * the station queried in the meantime then frames will also
+ * be sent out as a result of this. Additionally, the driver
+ * will be notified that the station woke up some time after
+ * it is unblocked, regardless of whether the station actually
+ * woke up while blocked or not.
+ */
+void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
+			       struct ieee80211_sta *pubsta, bool block);
+
+/**
  * ieee80211_beacon_loss - inform hardware does not receive beacons
  *
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.