diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-22 21:53:37 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-22 21:53:37 +0300 |
commit | 13e574b4941ee1931f8c70f33c3011f74e5fbd30 (patch) | |
tree | 786e3febef35e2db314f96547d04d261733c4f05 /include | |
parent | 0175ec3a28c695562a08fdccf73f2ec5ed744e2f (diff) | |
parent | de82c25dab9ac0fa01c95b8914bde8d9ce528e93 (diff) | |
download | linux-13e574b4941ee1931f8c70f33c3011f74e5fbd30.tar.xz |
Merge tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a fairly quiet release for SPI, though it is likely that
the next release will have some big changes as there's some
preparatory work for multiple chip select support gone in - the rest
of the code is on the list but will need to be rebased onto -rc1.
Otherwise there's a couple of new tunables for chip select timings,
some new devices and smaller device specific updates and fixes.
- Support for configuring the hold and minimum inactive times for
chip selects.
- Beginnings of support for supporting devices which have multiple
chip selects on a single device.
- Support for newer Broadcom HSSPI and Intel controllers, Silicon
Labs EM3581 and SI3210"
* tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (67 commits)
spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domains
spi: spidev: drop the incorrect notice from Kconfig
spi: bcm63xx-hsspi: fix error code in probe
spi: bcmbca-hsspi: Fix error code in probe() function
spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
spi: intel: Check number of chip selects after reading the descriptor
spi: xilinx: add force_irq for QSPI mode
spi: spi-st-ssc: convert to DT schema
spi: Reorder fields in 'struct spi_transfer'
spi: cadence-quadspi: use STIG mode for small reads
spi: cadence-quadspi: setup ADDR Bits in cmd reads
spi: cadence-quadspi: Add flag for direct mode writes
spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion
MAINTAINERS: Remove file reference for Broadcom Broadband SoC HS SPI driver entry
spi: bcm63xx-hsspi: bcmbca-hsspi: fix _be16 type usage
MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers
spi: bcmbca-hsspi: Add driver for newer HSSPI controller
spi: bcm63xx-hsspi: Disable spi mem dual io read op support
spi: spi-mem: Allow controller supporting mem_ops without exec_op
spi: bcm63xx-hsspi: Add prepend mode support
...
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/spi/altera.h | 4 | ||||
-rw-r--r-- | include/linux/spi/spi.h | 32 | ||||
-rw-r--r-- | include/linux/spi/xilinx_spi.h | 1 |
3 files changed, 29 insertions, 8 deletions
diff --git a/include/linux/spi/altera.h b/include/linux/spi/altera.h index 2e2a622e56da..3b74c3750caf 100644 --- a/include/linux/spi/altera.h +++ b/include/linux/spi/altera.h @@ -14,7 +14,7 @@ /** * struct altera_spi_platform_data - Platform data of the Altera SPI driver - * @mode_bits: Mode bits of SPI master. + * @mode_bits: Mode bits of SPI host. * @num_chipselect: Number of chipselects. * @bits_per_word_mask: bitmask of supported bits_per_word for transfers. * @num_devices: Number of devices that shall be added when the driver @@ -46,5 +46,5 @@ struct altera_spi { }; extern irqreturn_t altera_spi_irq(int irq, void *dev); -extern void altera_spi_init_master(struct spi_master *master); +extern void altera_spi_init_host(struct spi_controller *host); #endif /* __LINUX_SPI_ALTERA_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 9a32495fbb1f..a08c20bd833b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -26,6 +26,7 @@ struct spi_controller; struct spi_transfer; struct spi_controller_mem_ops; struct spi_controller_mem_caps; +struct spi_message; /* * INTERFACES between SPI master-side drivers and SPI slave protocol handlers, @@ -119,6 +120,8 @@ struct spi_delay { extern int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer); extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); +extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, + struct spi_transfer *xfer); /** * struct spi_device - Controller side proxy for an SPI slave device @@ -263,7 +266,25 @@ static inline void *spi_get_drvdata(struct spi_device *spi) return dev_get_drvdata(&spi->dev); } -struct spi_message; +static inline u8 spi_get_chipselect(struct spi_device *spi, u8 idx) +{ + return spi->chip_select; +} + +static inline void spi_set_chipselect(struct spi_device *spi, u8 idx, u8 chipselect) +{ + spi->chip_select = chipselect; +} + +static inline struct gpio_desc *spi_get_csgpiod(struct spi_device *spi, u8 idx) +{ + return spi->cs_gpiod; +} + +static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_desc *csgpiod) +{ + spi->cs_gpiod = csgpiod; +} /** * struct spi_driver - Host side "protocol" driver @@ -1001,6 +1022,9 @@ struct spi_transfer { void *rx_buf; unsigned len; +#define SPI_TRANS_FAIL_NO_START BIT(0) + u16 error; + dma_addr_t tx_dma; dma_addr_t rx_dma; struct sg_table tx_sg; @@ -1011,6 +1035,7 @@ struct spi_transfer { unsigned cs_change:1; unsigned tx_nbits:3; unsigned rx_nbits:3; + unsigned timestamped:1; #define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */ #define SPI_NBITS_DUAL 0x02 /* 2bits transfer */ #define SPI_NBITS_QUAD 0x04 /* 4bits transfer */ @@ -1027,12 +1052,7 @@ struct spi_transfer { struct ptp_system_timestamp *ptp_sts; - bool timestamped; - struct list_head transfer_list; - -#define SPI_TRANS_FAIL_NO_START BIT(0) - u16 error; }; /** diff --git a/include/linux/spi/xilinx_spi.h b/include/linux/spi/xilinx_spi.h index c15d69d28e68..3934ce789d87 100644 --- a/include/linux/spi/xilinx_spi.h +++ b/include/linux/spi/xilinx_spi.h @@ -15,6 +15,7 @@ struct xspi_platform_data { u8 bits_per_word; struct spi_board_info *devices; u8 num_devices; + bool force_irq; }; #endif /* __LINUX_SPI_XILINX_SPI_H */ |