mm: per-thread vma caching

This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed.  There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma().  Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.

We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality.  On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.

The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number.  The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed.  Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question.  Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:

1) System bootup: Most programs are single threaded, so the per-thread
   scheme does improve ~50% hit rate by just adding a few more slots to
   the cache.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 50.61%   | 19.90            |
| patched        | 73.45%   | 13.58            |
+----------------+----------+------------------+

2) Kernel build: This one is already pretty good with the current
   approach as we're dealing with good locality.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 75.28%   | 11.03            |
| patched        | 88.09%   | 9.31             |
+----------------+----------+------------------+

3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 70.66%   | 17.14            |
| patched        | 91.15%   | 12.57            |
+----------------+----------+------------------+

4) Ebizzy: There's a fair amount of variation from run to run, but this
   approach always shows nearly perfect hit rates, while baseline is just
   about non-existent.  The amounts of cycles can fluctuate between
   anywhere from ~60 to ~116 for the baseline scheme, but this approach
   reduces it considerably.  For instance, with 80 threads:

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 1.06%    | 91.54            |
| patched        | 99.97%   | 14.18            |
+----------------+----------+------------------+

[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 47 insertions, 2 deletions

diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 290901a8c1de..2b58d192ea24 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -342,9 +342,9 @@ struct mm_rss_stat {
 
 struct kioctx_table;
 struct mm_struct {
-	struct vm_area_struct * mmap;		/* list of VMAs */
+	struct vm_area_struct *mmap;		/* list of VMAs */
 	struct rb_root mm_rb;
-	struct vm_area_struct * mmap_cache;	/* last find_vma result */
+	u32 vmacache_seqnum;                   /* per-thread vmacache */
 #ifdef CONFIG_MMU
 	unsigned long (*get_unmapped_area) (struct file *filp,
 				unsigned long addr, unsigned long len,
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 7cb07fd26680..642477dd814a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -132,6 +132,10 @@ struct perf_event_context;
 struct blk_plug;
 struct filename;
 
+#define VMACACHE_BITS 2
+#define VMACACHE_SIZE (1U << VMACACHE_BITS)
+#define VMACACHE_MASK (VMACACHE_SIZE - 1)
+
 /*
  * List of flags we want to share for kernel threads,
  * if only because they are not used by them anyway.
@@ -1235,6 +1239,9 @@ struct task_struct {
 #ifdef CONFIG_COMPAT_BRK
 	unsigned brk_randomized:1;
 #endif
+	/* per-thread vma caching */
+	u32 vmacache_seqnum;
+	struct vm_area_struct *vmacache[VMACACHE_SIZE];
 #if defined(SPLIT_RSS_COUNTING)
 	struct task_rss_stat	rss_stat;
 #endif
diff --git a/include/linux/vmacache.h b/include/linux/vmacache.h
new file mode 100644
index 000000000000..c3fa0fd43949
--- /dev/null
+++ b/include/linux/vmacache.h
@@ -0,0 +1,38 @@
+#ifndef __LINUX_VMACACHE_H
+#define __LINUX_VMACACHE_H
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+/*
+ * Hash based on the page number. Provides a good hit rate for
+ * workloads with good locality and those with random accesses as well.
+ */
+#define VMACACHE_HASH(addr) ((addr >> PAGE_SHIFT) & VMACACHE_MASK)
+
+static inline void vmacache_flush(struct task_struct *tsk)
+{
+	memset(tsk->vmacache, 0, sizeof(tsk->vmacache));
+}
+
+extern void vmacache_flush_all(struct mm_struct *mm);
+extern void vmacache_update(unsigned long addr, struct vm_area_struct *newvma);
+extern struct vm_area_struct *vmacache_find(struct mm_struct *mm,
+						    unsigned long addr);
+
+#ifndef CONFIG_MMU
+extern struct vm_area_struct *vmacache_find_exact(struct mm_struct *mm,
+						  unsigned long start,
+						  unsigned long end);
+#endif
+
+static inline void vmacache_invalidate(struct mm_struct *mm)
+{
+	mm->vmacache_seqnum++;
+
+	/* deal with overflows */
+	if (unlikely(mm->vmacache_seqnum == 0))
+		vmacache_flush_all(mm);
+}
+
+#endif /* __LINUX_VMACACHE_H */