Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John Linville says:

====================
Here is another batch of updates intended for 3.6.  This includes a
number of pulls, including ones from the mac80211, iwlwifi, ath6kl, and
wl12xx trees.  I also pulled from the wireless tree to avoid potential
build conflicts.  There are a number of other patches applied directly,
including a number for the Broadcom drivers and the mwifiex driver.

The updates cover the usual variety of new hardware support and feature
enhancements.  It's all good work, but there aren't any big headliners.
This does resolve a net-next/wireless-next merge conflict reported
by Stephen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 238 insertions, 100 deletions

diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 8deaf6d050c3..12334f9190cb 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -70,6 +70,13 @@ struct bcma_host_ops {
 
 /* Core-ID values. */
 #define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_4706_CHIPCOMMON	0x500
+#define BCMA_CORE_4706_SOC_RAM		0x50E
+#define BCMA_CORE_4706_MAC_GBIT		0x52D
+#define BCMA_CORE_AMEMC			0x52E	/* DDR1/2 memory controller core */
+#define BCMA_CORE_ALTA			0x534	/* I2S core */
+#define BCMA_CORE_4706_MAC_GBIT_COMMON	0x5DC
+#define BCMA_CORE_DDR23_PHY		0x5DD
 #define BCMA_CORE_INVALID		0x700
 #define BCMA_CORE_CHIPCOMMON		0x800
 #define BCMA_CORE_ILINE20		0x801
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ce9af8918514..318fc1f705b1 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -568,6 +568,26 @@ struct ieee80211s_hdr {
 #define MESH_FLAGS_PS_DEEP	0x4
 
 /**
+ * enum ieee80211_preq_flags - mesh PREQ element flags
+ *
+ * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
+ */
+enum ieee80211_preq_flags {
+	IEEE80211_PREQ_PROACTIVE_PREP_FLAG	= 1<<2,
+};
+
+/**
+ * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
+ *
+ * @IEEE80211_PREQ_TO_FLAG: target only subfield
+ * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
+ */
+enum ieee80211_preq_target_flags {
+	IEEE80211_PREQ_TO_FLAG	= 1<<0,
+	IEEE80211_PREQ_USN_FLAG	= 1<<2,
+};
+
+/**
  * struct ieee80211_quiet_ie
  *
  * This structure refers to "Quiet information element"
@@ -1443,7 +1463,7 @@ enum ieee80211_tdls_actioncode {
  *
  * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
  * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
- * that will be specified in a vendor specific information element
+ *	that will be specified in a vendor specific information element
  */
 enum {
 	IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
@@ -1455,7 +1475,7 @@ enum {
  *
  * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
  * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
- * be specified in a vendor specific information element
+ *	be specified in a vendor specific information element
  */
 enum {
 	IEEE80211_PATH_PROTOCOL_HWMP = 1,
@@ -1467,13 +1487,35 @@ enum {
  *
  * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
  * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
- * specified in a vendor specific information element
+ *	specified in a vendor specific information element
  */
 enum {
 	IEEE80211_PATH_METRIC_AIRTIME = 1,
 	IEEE80211_PATH_METRIC_VENDOR = 255,
 };
 
+/**
+ * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
+ *
+ * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
+ *
+ * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
+ * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
+ *	this value
+ * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
+ *	the proactive PREQ with proactive PREP subfield set to 0
+ * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
+ *	supports the proactive PREQ with proactive PREP subfield set to 1
+ * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
+ *	the proactive RANN
+ */
+enum ieee80211_root_mode_identifier {
+	IEEE80211_ROOTMODE_NO_ROOT = 0,
+	IEEE80211_ROOTMODE_ROOT = 1,
+	IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
+	IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
+	IEEE80211_PROACTIVE_RANN = 4,
+};
 
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element
@@ -1589,6 +1631,10 @@ enum ieee80211_sa_query_action {
 
 #define WLAN_OUI_WFA			0x506f9a
 #define WLAN_OUI_TYPE_WFA_P2P		9
+#define WLAN_OUI_MICROSOFT		0x0050f2
+#define WLAN_OUI_TYPE_MICROSOFT_WPA	1
+#define WLAN_OUI_TYPE_MICROSOFT_WMM	2
+#define WLAN_OUI_TYPE_MICROSOFT_WPS	4
 
 /*
  * WMM/802.11e Tspec Element
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 970afdf5a605..c0fc5d277338 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -277,6 +277,12 @@
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
  *
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  * 	has been changed and provides details of the request information
  * 	that caused the change such as who initiated the regulatory request
@@ -456,6 +462,10 @@
  *	the frame.
  * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
  *	backward compatibility.
+ *
+ * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
+ * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
+ *
  * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
  *	is used to configure connection quality monitoring notification trigger
  *	levels.
@@ -771,6 +781,13 @@ enum nl80211_commands {
  *	section 7.3.2.25.1, e.g. 0x000FAC04)
  * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
  *	CCMP keys, each six bytes in little endian
+ * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
+ * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
+ *	default management key
+ * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
+ *	other commands, indicates which pairwise cipher suites are used
+ * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
+ *	other commands, indicates which group cipher suite is used
  *
  * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
  * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
@@ -1006,6 +1023,8 @@ enum nl80211_commands {
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
  *
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
+ *
  * @NL80211_ATTR_CQM: connection quality monitor configuration in a
  *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
  *
@@ -1063,7 +1082,7 @@ enum nl80211_commands {
  *	flag isn't set, the frame will be rejected. This is also used as an
  *	nl80211 capability flag.
  *
- * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
  *
  * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
  *	attributes, specifying what a key should be set as default as.
@@ -1087,10 +1106,10 @@ enum nl80211_commands {
  *	indicate which WoW triggers should be enabled. This is also
  *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
  *	triggers.
-
+ *
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *	cycles, in msecs.
-
+ *
  * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
  *	sets of attributes to match during scheduled scans.  Only BSSs
  *	that match any of the sets will be reported.  These are
@@ -1117,7 +1136,7 @@ enum nl80211_commands {
  *	are managed in software: interfaces of these types aren't subject to
  *	any restrictions in their number or combinations.
  *
- * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
  *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
  *
  * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
@@ -1184,7 +1203,6 @@ enum nl80211_commands {
  * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
  *	&enum nl80211_feature_flags and is advertised in wiphy information.
  * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *
  *	requests while operating in AP-mode.
  *	This attribute holds a bitmap of the supported protocols for
  *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
@@ -1524,6 +1542,9 @@ enum nl80211_attrs {
 
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
 
+/* default RSSI threshold for scan results if none specified. */
+#define NL80211_SCAN_RSSI_THOLD_OFF		-300
+
 /**
  * enum nl80211_iftype - (virtual) interface types
  *
@@ -1956,6 +1977,8 @@ enum nl80211_reg_rule_attr {
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
  * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+ *	BSS in scan results. Filtering is turned off if not specified.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -1963,7 +1986,8 @@ enum nl80211_reg_rule_attr {
 enum nl80211_sched_scan_match_attr {
 	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
 
-	NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -1971,6 +1995,9 @@ enum nl80211_sched_scan_match_attr {
 		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
 };
 
+/* only for backward compatibility */
+#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
+
 /**
  * enum nl80211_reg_rule_flags - regulatory rule flags
  *
@@ -2090,78 +2117,91 @@ enum nl80211_mntr_flags {
  * @__NL80211_MESHCONF_INVALID: internal use
  *
  * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- * millisecond units, used by the Peer Link Open message
+ *	millisecond units, used by the Peer Link Open message
  *
  * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- * millisecond units, used by the peer link management to close a peer link
+ *	millisecond units, used by the peer link management to close a peer link
  *
  * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- * millisecond units
+ *	millisecond units
  *
  * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- * on this mesh interface
+ *	on this mesh interface
  *
  * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- * open retries that can be sent to establish a new peer link instance in a
- * mesh
+ *	open retries that can be sent to establish a new peer link instance in a
+ *	mesh
  *
  * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- * point.
+ *	point.
  *
  * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- * open peer links when we detect compatible mesh peers.
+ *	open peer links when we detect compatible mesh peers.
  *
  * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- * containing a PREQ that an MP can send to a particular destination (path
- * target)
+ *	containing a PREQ that an MP can send to a particular destination (path
+ *	target)
  *
  * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- * (in milliseconds)
+ *	(in milliseconds)
  *
  * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- * until giving up on a path discovery (in milliseconds)
+ *	until giving up on a path discovery (in milliseconds)
  *
  * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- * points receiving a PREQ shall consider the forwarding information from the
- * root to be valid. (TU = time unit)
+ *	points receiving a PREQ shall consider the forwarding information from
+ *	the root to be valid. (TU = time unit)
  *
  * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which an MP can send only one action frame containing a PREQ
- * reference element
+ *	TUs) during which an MP can send only one action frame containing a PREQ
+ *	reference element
  *
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- * that it takes for an HWMP information element to propagate across the mesh
+ *	that it takes for an HWMP information element to propagate across the
+ *	mesh
  *
  * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- * source mesh point for path selection elements.
+ *	source mesh point for path selection elements.
  *
  * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
- * root announcements are transmitted.
+ *	root announcements are transmitted.
  *
  * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- * access to a broader network beyond the MBSS.  This is done via Root
- * Announcement frames.
+ *	access to a broader network beyond the MBSS.  This is done via Root
+ *	Announcement frames.
  *
  * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which a mesh STA can send only one Action frame containing a
- * PERR element.
+ *	TUs) during which a mesh STA can send only one Action frame containing a
+ *	PERR element.
  *
  * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- * or forwarding entity (default is TRUE - forwarding entity)
+ *	or forwarding entity (default is TRUE - forwarding entity)
  *
  * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- * threshold for average signal strength of candidate station to establish
- * a peer link.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *	threshold for average signal strength of candidate station to establish
+ *	a peer link.
  *
  * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
+ *	to synchronize to for 11s default synchronization method
+ *	(see 11C.12.2.2)
  *
  * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
  *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
+ *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
+ *	information to the root mesh STA to be valid.
+ *
+ * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
+ *	proactive PREQs are transmitted.
+ *
+ * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
+ *	(in TUs) during which a mesh STA can send only one Action frame
+ *	containing a PREQ element for root path confirmation.
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2188,6 +2228,9 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_RSSI_THRESHOLD,
 	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
 	NL80211_MESHCONF_HT_OPMODE,
+	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
+	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2203,34 +2246,36 @@ enum nl80211_meshconf_params {
  * @__NL80211_MESH_SETUP_INVALID: Internal use
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- * vendor specific path selection algorithm or disable it to use the default
- * HWMP.
+ *	vendor specific path selection algorithm or disable it to use the
+ *	default HWMP.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- * vendor specific path metric or disable it to use the default Airtime
- * metric.
+ *	vendor specific path metric or disable it to use the default Airtime
+ *	metric.
  *
  * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- * robust security network ie, or a vendor specific information element that
- * vendors will use to identify the path selection methods and metrics in use.
+ *	robust security network ie, or a vendor specific information element
+ *	that vendors will use to identify the path selection methods and
+ *	metrics in use.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- * daemon will be authenticating mesh candidates.
+ *	daemon will be authenticating mesh candidates.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
- * Peering Management (MPM) and is implemented with the assistance of a
- * userspace daemon.  When this flag is set, the kernel will send peer
- * management frames to a userspace daemon that will implement AMPE
- * functionality (security capabilities selection, key confirmation, and key
- * management).  When the flag is unset (default), the kernel can autonomously
- * complete (unsecured) mesh peering without the need of a userspace daemon.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *	daemon will be securing peer link frames.  AMPE is a secured version of
+ *	Mesh Peering Management (MPM) and is implemented with the assistance of
+ *	a userspace daemon.  When this flag is set, the kernel will send peer
+ *	management frames to a userspace daemon that will implement AMPE
+ *	functionality (security capabilities selection, key confirmation, and
+ *	key management).  When the flag is unset (default), the kernel can
+ *	autonomously complete (unsecured) mesh peering without the need of a
+ *	userspace daemon.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- * vendor specific synchronization method or disable it to use the default
- * neighbor offset synchronization
+ *	vendor specific synchronization method or disable it to use the default
+ *	neighbor offset synchronization
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
@@ -2500,6 +2545,11 @@ enum nl80211_band {
 	NL80211_BAND_5GHZ,
 };
 
+/**
+ * enum nl80211_ps_state - powersave state
+ * @NL80211_PS_DISABLED: powersave is disabled
+ * @NL80211_PS_ENABLED: powersave is enabled
+ */
 enum nl80211_ps_state {
 	NL80211_PS_DISABLED,
 	NL80211_PS_ENABLED,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7319f25250b6..061c01957e54 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -627,10 +627,10 @@ struct sta_bss_parameters {
  * @llid: mesh local link id
  * @plid: mesh peer link id
  * @plink_state: mesh peer link state
- * @signal: the signal strength, type depends on the wiphy's signal_type
-	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
- * @signal_avg: avg signal strength, type depends on the wiphy's signal_type
-	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal: The signal strength, type depends on the wiphy's signal_type.
+ *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
+ *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
  * @txrate: current unicast bitrate from this station
  * @rxrate: current unicast bitrate to this station
  * @rx_packets: packets received from this station
@@ -790,43 +790,95 @@ struct bss_parameters {
 	int ht_opmode;
 };
 
-/*
+/**
  * struct mesh_config - 802.11s mesh configuration
  *
  * These parameters can be changed while the mesh is active.
+ *
+ * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
+ *	by the Mesh Peering Open message
+ * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
+ *	used by the Mesh Peering Open message
+ * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
+ *	the mesh peering management to close a mesh peering
+ * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
+ *	mesh interface
+ * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
+ *	be sent to establish a new peer link instance in a mesh
+ * @dot11MeshTTL: the value of TTL field set at a source mesh STA
+ * @element_ttl: the value of TTL field set at a mesh STA for path selection
+ *	elements
+ * @auto_open_plinks: whether we should automatically open peer links when we
+ *	detect compatible mesh peers
+ * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
+ *	synchronize to for 11s default synchronization method
+ * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
+ *	that an originator mesh STA can send to a particular path target
+ * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
+ * @min_discovery_timeout: the minimum length of time to wait until giving up on
+ *	a path discovery in milliseconds
+ * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
+ *	receiving a PREQ shall consider the forwarding information from the
+ *	root to be valid. (TU = time unit)
+ * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
+ *	which a mesh STA can send only one action frame containing a PREQ
+ *	element
+ * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
+ *	which a mesh STA can send only one Action frame containing a PERR
+ *	element
+ * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
+ *	it takes for an HWMP information element to propagate across the mesh
+ * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
+ * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
+ *	announcements are transmitted
+ * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
+ *	station has access to a broader network beyond the MBSS. (This is
+ *	missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
+ *	only means that the station will announce others it's a mesh gate, but
+ *	not necessarily using the gate announcement protocol. Still keeping the
+ *	same nomenclature to be in sync with the spec)
+ * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
+ *	entity (default is TRUE - forwarding entity)
+ * @rssi_threshold: the threshold for average signal strength of candidate
+ *	station to establish a peer link
+ * @ht_opmode: mesh HT protection mode
+ *
+ * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
+ *	receiving a proactive PREQ shall consider the forwarding information to
+ *	the root mesh STA to be valid.
+ *
+ * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
+ *	PREQs are transmitted.
+ * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
+ *	during which a mesh STA can send only one Action frame containing
+ *	a PREQ element for root path confirmation.
  */
 struct mesh_config {
-	/* Timeouts in ms */
-	/* Mesh plink management parameters */
 	u16 dot11MeshRetryTimeout;
 	u16 dot11MeshConfirmTimeout;
 	u16 dot11MeshHoldingTimeout;
 	u16 dot11MeshMaxPeerLinks;
-	u8  dot11MeshMaxRetries;
-	u8  dot11MeshTTL;
-	/* ttl used in path selection information elements */
-	u8  element_ttl;
+	u8 dot11MeshMaxRetries;
+	u8 dot11MeshTTL;
+	u8 element_ttl;
 	bool auto_open_plinks;
-	/* neighbor offset synchronization */
 	u32 dot11MeshNbrOffsetMaxNeighbor;
-	/* HWMP parameters */
-	u8  dot11MeshHWMPmaxPREQretries;
+	u8 dot11MeshHWMPmaxPREQretries;
 	u32 path_refresh_time;
 	u16 min_discovery_timeout;
 	u32 dot11MeshHWMPactivePathTimeout;
 	u16 dot11MeshHWMPpreqMinInterval;
 	u16 dot11MeshHWMPperrMinInterval;
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
-	u8  dot11MeshHWMPRootMode;
+	u8 dot11MeshHWMPRootMode;
 	u16 dot11MeshHWMPRannInterval;
-	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
-	 * set to true only means that the station will announce others it's a
-	 * mesh gate, but not necessarily using the gate announcement protocol.
-	 * Still keeping the same nomenclature to be in sync with the spec. */
-	bool  dot11MeshGateAnnouncementProtocol;
+	bool dot11MeshGateAnnouncementProtocol;
 	bool dot11MeshForwarding;
 	s32 rssi_threshold;
 	u16 ht_opmode;
+	u32 dot11MeshHWMPactivePathToRootTimeout;
+	u16 dot11MeshHWMProotInterval;
+	u16 dot11MeshHWMPconfirmationInterval;
 };
 
 /**
@@ -975,6 +1027,7 @@ struct cfg80211_match_set {
  * @wiphy: the wiphy this was for
  * @dev: the interface
  * @channels: channels to scan
+ * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -985,6 +1038,7 @@ struct cfg80211_sched_scan_request {
 	size_t ie_len;
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
+	s32 rssi_thold;
 
 	/* internal */
 	struct wiphy *wiphy;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 6914f9978aea..670a58ba8a41 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2254,6 +2254,9 @@ enum ieee80211_rate_control_changed {
  * @get_et_strings:  Ethtool API to get a set of strings to describe stats
  *	and perhaps other supported types of ethtool data-sets.
  *
+ * @get_rssi: Get current signal strength in dBm, the function is optional
+ *	and can sleep.
+ *
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -2393,6 +2396,8 @@ struct ieee80211_ops {
 	void	(*get_et_strings)(struct ieee80211_hw *hw,
 				  struct ieee80211_vif *vif,
 				  u32 sset, u8 *data);
+	int	(*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta, s8 *rssi_dbm);
 };
 
 /**
@@ -3843,28 +3848,4 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
  */
 int ieee80211_ave_rssi(struct ieee80211_vif *vif);
 
-/* Extra debugging macros */
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
-#define ht_vdbg(fmt, ...)			\
-	pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define ht_vdbg(fmt, ...)			\
-do {						\
-	if (0)					\
-		pr_debug(fmt, ##__VA_ARGS__);	\
-} while (0)
-#endif
-
-#ifdef CONFIG_MAC80211_IBSS_DEBUG
-#define ibss_vdbg(fmt, ...)			\
-	pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define ibss_vdbg(fmt, ...)			\
-do {						\
-	if (0)					\
-		pr_debug(fmt, ##__VA_ARGS__);	\
-} while (0)
-#endif
-
 #endif /* MAC80211_H */