cfg80211/nl80211: add API for MAC address ACLs

Add API to enable drivers to implement MAC address based
access control in AP/P2P GO mode. Capable drivers advertise
this capability by setting the maximum number of MAC
addresses in such a list in wiphy->max_acl_mac_addrs.

An initial ACL may be given to the NL80211_CMD_START_AP
command and/or changed later with NL80211_CMD_SET_MAC_ACL.

Black- and whitelists are supported, but not simultaneously.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
[rewrite commit log, many cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

2 files changed, 83 insertions, 2 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 183033789e69..36e076e374d2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -532,6 +532,22 @@ struct mac_address {
 };
 
 /**
+ * struct cfg80211_acl_data - Access control list data
+ *
+ * @acl_policy: ACL policy to be applied on the station's
+	entry specified by mac_addr
+ * @n_acl_entries: Number of MAC address entries passed
+ * @mac_addrs: List of MAC addresses of stations to be used for ACL
+ */
+struct cfg80211_acl_data {
+	enum nl80211_acl_policy acl_policy;
+	int n_acl_entries;
+
+	/* Keep it last */
+	struct mac_address mac_addrs[];
+};
+
+/**
  * struct cfg80211_ap_settings - AP configuration
  *
  * Used to configure an AP interface.
@@ -550,6 +566,8 @@ struct mac_address {
  * @inactivity_timeout: time in seconds to determine station's inactivity.
  * @p2p_ctwindow: P2P CT Window
  * @p2p_opp_ps: P2P opportunistic PS
+ * @acl: ACL configuration used by the drivers which has support for
+ *	MAC address based access control
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -566,6 +584,7 @@ struct cfg80211_ap_settings {
 	int inactivity_timeout;
 	u8 p2p_ctwindow;
 	bool p2p_opp_ps;
+	const struct cfg80211_acl_data *acl;
 };
 
 /**
@@ -1800,6 +1819,13 @@ struct cfg80211_gtk_rekey_data {
  *
  * @start_p2p_device: Start the given P2P device.
  * @stop_p2p_device: Stop the given P2P device.
+ *
+ * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode.
+ *	Parameters include ACL policy, an array of MAC address of stations
+ *	and the number of MAC addresses. If there is already a list in driver
+ *	this new list replaces the existing one. Driver has to clear its ACL
+ *	when number of MAC addresses entries is passed as 0. Drivers which
+ *	advertise the support for MAC based ACL have to implement this callback.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2020,6 +2046,9 @@ struct cfg80211_ops {
 				    struct wireless_dev *wdev);
 	void	(*stop_p2p_device)(struct wiphy *wiphy,
 				   struct wireless_dev *wdev);
+
+	int	(*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev,
+			       const struct cfg80211_acl_data *params);
 };
 
 /*
@@ -2325,6 +2354,9 @@ struct wiphy_wowlan_support {
  * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  * @ht_capa_mod_mask:  Specify what ht_cap values can be over-ridden.
  *	If null, then none can be over-ridden.
+ *
+ * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
+ *	supports for ACL.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -2346,6 +2378,8 @@ struct wiphy {
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
+	u16 max_acl_mac_addrs;
+
 	u32 flags, features;
 
 	u32 ap_sme_capa;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e6eeb4ba5dc5..5b7dbc1ea966 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -170,7 +170,8 @@
  *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
  *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
  *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
@@ -586,6 +587,16 @@
  * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
  *	for IBSS or MESH vif.
  *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ *	This is to be used with the drivers advertising the support of MAC
+ *	address based access control. List of MAC addresses is passed in
+ *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ *	is not already done. The new list will replace any existing list. Driver
+ *	will clear its ACL when the list of MAC addresses passed is empty. This
+ *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ *	ACL list during %NL80211_CMD_STOP_AP.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -736,6 +747,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_MCAST_RATE,
 
+	NL80211_CMD_SET_MAC_ACL,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1313,6 +1326,16 @@ enum nl80211_commands {
  * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
  *	defined in &enum nl80211_mesh_power_mode.
  *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ *	carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ *	MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ *	number of MAC addresses that a device can support for MAC
+ *	ACL.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1585,6 +1608,12 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
 
+	NL80211_ATTR_ACL_POLICY,
+
+	NL80211_ATTR_MAC_ADDRS,
+
+	NL80211_ATTR_MAC_ACL_MAX,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3248,7 +3277,7 @@ enum nl80211_probe_resp_offload_support_attr {
  * enum nl80211_connect_failed_reason - connection request failed reasons
  * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
  *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
  */
 enum nl80211_connect_failed_reason {
 	NL80211_CONN_FAIL_MAX_CLIENTS,
@@ -3276,4 +3305,22 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_AP				= 1<<2,
 };
 
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ *	listed in ACL, i.e. allow all the stations which are not listed
+ *	in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ *	in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
 #endif /* __LINUX_NL80211_H */