Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

2 files changed, 1 insertions, 25 deletions

diff --git a/include/clocksource/pxa.h b/include/clocksource/pxa.h
index 1efbe5a66958..a9a0f03024a4 100644
--- a/include/clocksource/pxa.h
+++ b/include/clocksource/pxa.h
@@ -12,7 +12,6 @@
 #ifndef _CLOCKSOURCE_PXA_H
 #define _CLOCKSOURCE_PXA_H
 
-extern void pxa_timer_nodt_init(int irq, void __iomem *base,
-			   unsigned long clock_tick_rate);
+extern void pxa_timer_nodt_init(int irq, void __iomem *base);
 
 #endif
diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h
index e0bc4abe69c2..0926e99f2e8f 100644
--- a/include/linux/platform_data/usb-davinci.h
+++ b/include/linux/platform_data/usb-davinci.h
@@ -11,29 +11,6 @@
 #ifndef __ASM_ARCH_USB_H
 #define __ASM_ARCH_USB_H
 
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
 struct	da8xx_ohci_root_hub;
 
 typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,