Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

29 files changed, 1140 insertions, 79 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index f9b7fdd951e4..c65b374a5090 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -113,6 +113,10 @@ enum bpf_cmd {
 	BPF_MAP_DELETE_BATCH,
 	BPF_LINK_CREATE,
 	BPF_LINK_UPDATE,
+	BPF_LINK_GET_FD_BY_ID,
+	BPF_LINK_GET_NEXT_ID,
+	BPF_ENABLE_STATS,
+	BPF_ITER_CREATE,
 };
 
 enum bpf_map_type {
@@ -143,6 +147,7 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_SK_STORAGE,
 	BPF_MAP_TYPE_DEVMAP_HASH,
 	BPF_MAP_TYPE_STRUCT_OPS,
+	BPF_MAP_TYPE_RINGBUF,
 };
 
 /* Note that tracing related programs such as
@@ -215,11 +220,28 @@ enum bpf_attach_type {
 	BPF_TRACE_FEXIT,
 	BPF_MODIFY_RETURN,
 	BPF_LSM_MAC,
+	BPF_TRACE_ITER,
+	BPF_CGROUP_INET4_GETPEERNAME,
+	BPF_CGROUP_INET6_GETPEERNAME,
+	BPF_CGROUP_INET4_GETSOCKNAME,
+	BPF_CGROUP_INET6_GETSOCKNAME,
+	BPF_XDP_DEVMAP,
 	__MAX_BPF_ATTACH_TYPE
 };
 
 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
 
+enum bpf_link_type {
+	BPF_LINK_TYPE_UNSPEC = 0,
+	BPF_LINK_TYPE_RAW_TRACEPOINT = 1,
+	BPF_LINK_TYPE_TRACING = 2,
+	BPF_LINK_TYPE_CGROUP = 3,
+	BPF_LINK_TYPE_ITER = 4,
+	BPF_LINK_TYPE_NETNS = 5,
+
+	MAX_BPF_LINK_TYPE,
+};
+
 /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
  *
  * NONE(default): No further bpf programs allowed in the subtree.
@@ -379,6 +401,12 @@ enum {
  */
 #define BPF_F_QUERY_EFFECTIVE	(1U << 0)
 
+/* type for BPF_ENABLE_STATS */
+enum bpf_stats_type {
+	/* enabled run_time_ns and run_cnt */
+	BPF_STATS_RUN_TIME = 0,
+};
+
 enum bpf_stack_build_id_status {
 	/* user space need an empty entry to identify end of a trace */
 	BPF_STACK_BUILD_ID_EMPTY = 0,
@@ -523,6 +551,7 @@ union bpf_attr {
 			__u32		prog_id;
 			__u32		map_id;
 			__u32		btf_id;
+			__u32		link_id;
 		};
 		__u32		next_id;
 		__u32		open_flags;
@@ -589,6 +618,15 @@ union bpf_attr {
 		__u32		old_prog_fd;
 	} link_update;
 
+	struct { /* struct used by BPF_ENABLE_STATS command */
+		__u32		type;
+	} enable_stats;
+
+	struct { /* struct used by BPF_ITER_CREATE command */
+		__u32		link_fd;
+		__u32		flags;
+	} iter_create;
+
 } __attribute__((aligned(8)));
 
 /* The description below is an attempt at providing documentation to eBPF
@@ -644,14 +682,16 @@ union bpf_attr {
  * 		For tracing programs, safely attempt to read *size* bytes from
  * 		kernel space address *unsafe_ptr* and store the data in *dst*.
  *
- * 		Generally, use bpf_probe_read_user() or bpf_probe_read_kernel()
- * 		instead.
+ * 		Generally, use **bpf_probe_read_user**\ () or
+ * 		**bpf_probe_read_kernel**\ () instead.
  * 	Return
  * 		0 on success, or a negative error in case of failure.
  *
  * u64 bpf_ktime_get_ns(void)
  * 	Description
  * 		Return the time elapsed since system boot, in nanoseconds.
+ * 		Does not include time the system was suspended.
+ * 		See: **clock_gettime**\ (**CLOCK_MONOTONIC**)
  * 	Return
  * 		Current *ktime*.
  *
@@ -1510,11 +1550,11 @@ union bpf_attr {
  * int bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr)
  * 	Description
  * 		Copy a NUL terminated string from an unsafe kernel address
- * 		*unsafe_ptr* to *dst*. See bpf_probe_read_kernel_str() for
+ * 		*unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for
  * 		more details.
  *
- * 		Generally, use bpf_probe_read_user_str() or bpf_probe_read_kernel_str()
- * 		instead.
+ * 		Generally, use **bpf_probe_read_user_str**\ () or
+ * 		**bpf_probe_read_kernel_str**\ () instead.
  * 	Return
  * 		On success, the strictly positive length of the string,
  * 		including the trailing NUL character. On error, a negative
@@ -1542,7 +1582,7 @@ union bpf_attr {
  *
  * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
  * 	Description
- * 		Equivalent to bpf_get_socket_cookie() helper that accepts
+ * 		Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
  * 		*skb*, but gets socket from **struct bpf_sock_ops** context.
  * 	Return
  * 		A 8-byte long non-decreasing number.
@@ -1562,7 +1602,7 @@ union bpf_attr {
  * 	Return
  * 		0
  *
- * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen)
+ * int bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen)
  * 	Description
  * 		Emulate a call to **setsockopt()** on the socket associated to
  * 		*bpf_socket*, which must be a full socket. The *level* at
@@ -1570,6 +1610,12 @@ union bpf_attr {
  * 		must be specified, see **setsockopt(2)** for more information.
  * 		The option value of length *optlen* is pointed by *optval*.
  *
+ * 		*bpf_socket* should be one of the following:
+ *
+ * 		* **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
+ * 		* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
+ * 		  and **BPF_CGROUP_INET6_CONNECT**.
+ *
  * 		This helper actually implements a subset of **setsockopt()**.
  * 		It supports the following *level*\ s:
  *
@@ -1589,6 +1635,13 @@ union bpf_attr {
  * 		Grow or shrink the room for data in the packet associated to
  * 		*skb* by *len_diff*, and according to the selected *mode*.
  *
+ * 		By default, the helper will reset any offloaded checksum
+ * 		indicator of the skb to CHECKSUM_NONE. This can be avoided
+ * 		by the following flag:
+ *
+ * 		* **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded
+ * 		  checksum data of the skb to CHECKSUM_NONE.
+ *
  *		There are two supported modes at this time:
  *
  *		* **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
@@ -1634,12 +1687,12 @@ union bpf_attr {
  *
  * 		The lower two bits of *flags* are used as the return code if
  * 		the map lookup fails. This is so that the return value can be
- * 		one of the XDP program return codes up to XDP_TX, as chosen by
- * 		the caller. Any higher bits in the *flags* argument must be
+ * 		one of the XDP program return codes up to **XDP_TX**, as chosen
+ * 		by the caller. Any higher bits in the *flags* argument must be
  * 		unset.
  *
- * 		See also bpf_redirect(), which only supports redirecting to an
- * 		ifindex, but doesn't require a map to do so.
+ * 		See also **bpf_redirect**\ (), which only supports redirecting
+ * 		to an ifindex, but doesn't require a map to do so.
  * 	Return
  * 		**XDP_REDIRECT** on success, or the value of the two lower bits
  * 		of the *flags* argument on error.
@@ -1747,7 +1800,7 @@ union bpf_attr {
  * 		the time running for event since last normalization. The
  * 		enabled and running times are accumulated since the perf event
  * 		open. To achieve scaling factor between two invocations of an
- * 		eBPF program, users can can use CPU id as the key (which is
+ * 		eBPF program, users can use CPU id as the key (which is
  * 		typical for perf array usage model) to remember the previous
  * 		value and do the calculation inside the eBPF program.
  * 	Return
@@ -1764,7 +1817,7 @@ union bpf_attr {
  * 	Return
  * 		0 on success, or a negative error in case of failure.
  *
- * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen)
+ * int bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen)
  * 	Description
  * 		Emulate a call to **getsockopt()** on the socket associated to
  * 		*bpf_socket*, which must be a full socket. The *level* at
@@ -1773,6 +1826,12 @@ union bpf_attr {
  * 		The retrieved value is stored in the structure pointed by
  * 		*opval* and of length *optlen*.
  *
+ * 		*bpf_socket* should be one of the following:
+ *
+ * 		* **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
+ * 		* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
+ * 		  and **BPF_CGROUP_INET6_CONNECT**.
+ *
  * 		This helper actually implements a subset of **getsockopt()**.
  * 		It supports the following *level*\ s:
  *
@@ -1790,7 +1849,7 @@ union bpf_attr {
  * 		The first argument is the context *regs* on which the kprobe
  * 		works.
  *
- * 		This helper works by setting setting the PC (program counter)
+ * 		This helper works by setting the PC (program counter)
  * 		to an override function which is run in place of the original
  * 		probed function. This means the probed function is not run at
  * 		all. The replacement function just returns with the required
@@ -1959,18 +2018,19 @@ union bpf_attr {
  *
  * 		This helper works for IPv4 and IPv6, TCP and UDP sockets. The
  * 		domain (*addr*\ **->sa_family**) must be **AF_INET** (or
- * 		**AF_INET6**). Looking for a free port to bind to can be
- * 		expensive, therefore binding to port is not permitted by the
- * 		helper: *addr*\ **->sin_port** (or **sin6_port**, respectively)
- * 		must be set to zero.
+ * 		**AF_INET6**). It's advised to pass zero port (**sin_port**
+ * 		or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like
+ * 		behavior and lets the kernel efficiently pick up an unused
+ * 		port as long as 4-tuple is unique. Passing non-zero port might
+ * 		lead to degraded performance.
  * 	Return
  * 		0 on success, or a negative error in case of failure.
  *
  * int bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta)
  * 	Description
  * 		Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
- * 		only possible to shrink the packet as of this writing,
- * 		therefore *delta* must be a negative integer.
+ * 		possible to both shrink and grow the packet tail.
+ * 		Shrink done via *delta* being a negative integer.
  *
  * 		A call to this helper is susceptible to change the underlying
  * 		packet buffer. Therefore, at load time, all checks on pointers
@@ -2256,7 +2316,7 @@ union bpf_attr {
  *		**bpf_rc_keydown**\ () again with the same values, or calling
  *		**bpf_rc_repeat**\ ().
  *
- *		Some protocols include a toggle bit, in case the button	was
+ *		Some protocols include a toggle bit, in case the button was
  *		released and pressed again between consecutive scancodes.
  *
  *		The *ctx* should point to the lirc sample as passed into
@@ -2602,7 +2662,6 @@ union bpf_attr {
  *
  * 		*th* points to the start of the TCP header, while *th_len*
  * 		contains **sizeof**\ (**struct tcphdr**).
- *
  * 	Return
  * 		0 if *iph* and *th* are a valid SYN cookie ACK, or a negative
  * 		error otherwise.
@@ -2785,7 +2844,6 @@ union bpf_attr {
  *
  *		*th* points to the start of the TCP header, while *th_len*
  *		contains the length of the TCP header.
- *
  *	Return
  *		On success, lower 32 bits hold the generated SYN cookie in
  *		followed by 16 bits which hold the MSS value for that cookie,
@@ -2868,7 +2926,7 @@ union bpf_attr {
  * 				// size, after checking its boundaries.
  * 			}
  *
- * 		In comparison, using **bpf_probe_read_user()** helper here
+ * 		In comparison, using **bpf_probe_read_user**\ () helper here
  * 		instead to read the string would require to estimate the length
  * 		at compile time, and would often result in copying more memory
  * 		than necessary.
@@ -2886,14 +2944,14 @@ union bpf_attr {
  * int bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr)
  * 	Description
  * 		Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr*
- * 		to *dst*. Same semantics as with bpf_probe_read_user_str() apply.
+ * 		to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply.
  * 	Return
- * 		On success, the strictly positive length of the string,	including
+ * 		On success, the strictly positive length of the string, including
  * 		the trailing NUL character. On error, a negative value.
  *
  * int bpf_tcp_send_ack(void *tp, u32 rcv_nxt)
  *	Description
- *		Send out a tcp-ack. *tp* is the in-kernel struct tcp_sock.
+ *		Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**.
  *		*rcv_nxt* is the ack_seq to be sent out.
  *	Return
  *		0 on success, or a negative error in case of failure.
@@ -2921,19 +2979,19 @@ union bpf_attr {
  * int bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags)
  *	Description
  *		For an eBPF program attached to a perf event, retrieve the
- *		branch records (struct perf_branch_entry) associated to *ctx*
- *		and store it in	the buffer pointed by *buf* up to size
+ *		branch records (**struct perf_branch_entry**) associated to *ctx*
+ *		and store it in the buffer pointed by *buf* up to size
  *		*size* bytes.
  *	Return
  *		On success, number of bytes written to *buf*. On error, a
  *		negative value.
  *
  *		The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to
- *		instead	return the number of bytes required to store all the
+ *		instead return the number of bytes required to store all the
  *		branch entries. If this flag is set, *buf* may be NULL.
  *
  *		**-EINVAL** if arguments invalid or **size** not a multiple
- *		of sizeof(struct perf_branch_entry).
+ *		of **sizeof**\ (**struct perf_branch_entry**\ ).
  *
  *		**-ENOENT** if architecture does not support branch records.
  *
@@ -2941,8 +2999,8 @@ union bpf_attr {
  *	Description
  *		Returns 0 on success, values for *pid* and *tgid* as seen from the current
  *		*namespace* will be returned in *nsdata*.
- *
- *		On failure, the returned value is one of the following:
+ *	Return
+ *		0 on success, or one of the following in case of failure:
  *
  *		**-EINVAL** if dev and inum supplied don't match dev_t and inode number
  *              with nsfs of current task, or if dev conversion to dev_t lost high bits.
@@ -2981,8 +3039,8 @@ union bpf_attr {
  * 		a global identifier that can be assumed unique. If *ctx* is
  * 		NULL, then the helper returns the cookie for the initial
  * 		network namespace. The cookie itself is very similar to that
- * 		of bpf_get_socket_cookie() helper, but for network namespaces
- * 		instead of sockets.
+ * 		of **bpf_get_socket_cookie**\ () helper, but for network
+ * 		namespaces instead of sockets.
  * 	Return
  * 		A 8-byte long opaque number.
  *
@@ -3017,14 +3075,183 @@ union bpf_attr {
  *
  *		The *flags* argument must be zero.
  *	Return
- *		0 on success, or a negative errno in case of failure.
- *
- *		* **-EINVAL**		Unsupported flags specified.
- *		* **-ENOENT**		Socket is unavailable for assignment.
- *		* **-ENETUNREACH**	Socket is unreachable (wrong netns).
- *		* **-EOPNOTSUPP**	Unsupported operation, for example a
- *					call from outside of TC ingress.
- *		* **-ESOCKTNOSUPPORT**	Socket type not supported (reuseport).
+ *		0 on success, or a negative error in case of failure:
+ *
+ *		**-EINVAL** if specified *flags* are not supported.
+ *
+ *		**-ENOENT** if the socket is unavailable for assignment.
+ *
+ *		**-ENETUNREACH** if the socket is unreachable (wrong netns).
+ *
+ *		**-EOPNOTSUPP** if the operation is not supported, for example
+ *		a call from outside of TC ingress.
+ *
+ *		**-ESOCKTNOSUPPORT** if the socket type is not supported
+ *		(reuseport).
+ *
+ * u64 bpf_ktime_get_boot_ns(void)
+ * 	Description
+ * 		Return the time elapsed since system boot, in nanoseconds.
+ * 		Does include the time the system was suspended.
+ * 		See: **clock_gettime**\ (**CLOCK_BOOTTIME**)
+ * 	Return
+ * 		Current *ktime*.
+ *
+ * int bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len)
+ * 	Description
+ * 		**bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print
+ * 		out the format string.
+ * 		The *m* represents the seq_file. The *fmt* and *fmt_size* are for
+ * 		the format string itself. The *data* and *data_len* are format string
+ * 		arguments. The *data* are a **u64** array and corresponding format string
+ * 		values are stored in the array. For strings and pointers where pointees
+ * 		are accessed, only the pointer values are stored in the *data* array.
+ * 		The *data_len* is the size of *data* in bytes.
+ *
+ *		Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory.
+ *		Reading kernel memory may fail due to either invalid address or
+ *		valid address but requiring a major memory fault. If reading kernel memory
+ *		fails, the string for **%s** will be an empty string, and the ip
+ *		address for **%p{i,I}{4,6}** will be 0. Not returning error to
+ *		bpf program is consistent with what **bpf_trace_printk**\ () does for now.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure:
+ *
+ *		**-EBUSY** if per-CPU memory copy buffer is busy, can try again
+ *		by returning 1 from bpf program.
+ *
+ *		**-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported.
+ *
+ *		**-E2BIG** if *fmt* contains too many format specifiers.
+ *
+ *		**-EOVERFLOW** if an overflow happened: The same object will be tried again.
+ *
+ * int bpf_seq_write(struct seq_file *m, const void *data, u32 len)
+ * 	Description
+ * 		**bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data.
+ * 		The *m* represents the seq_file. The *data* and *len* represent the
+ * 		data to write in bytes.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure:
+ *
+ *		**-EOVERFLOW** if an overflow happened: The same object will be tried again.
+ *
+ * u64 bpf_sk_cgroup_id(struct bpf_sock *sk)
+ *	Description
+ *		Return the cgroup v2 id of the socket *sk*.
+ *
+ *		*sk* must be a non-**NULL** pointer to a full socket, e.g. one
+ *		returned from **bpf_sk_lookup_xxx**\ (),
+ *		**bpf_sk_fullsock**\ (), etc. The format of returned id is
+ *		same as in **bpf_skb_cgroup_id**\ ().
+ *
+ *		This helper is available only if the kernel was compiled with
+ *		the **CONFIG_SOCK_CGROUP_DATA** configuration option.
+ *	Return
+ *		The id is returned or 0 in case the id could not be retrieved.
+ *
+ * u64 bpf_sk_ancestor_cgroup_id(struct bpf_sock *sk, int ancestor_level)
+ *	Description
+ *		Return id of cgroup v2 that is ancestor of cgroup associated
+ *		with the *sk* at the *ancestor_level*.  The root cgroup is at
+ *		*ancestor_level* zero and each step down the hierarchy
+ *		increments the level. If *ancestor_level* == level of cgroup
+ *		associated with *sk*, then return value will be same as that
+ *		of **bpf_sk_cgroup_id**\ ().
+ *
+ *		The helper is useful to implement policies based on cgroups
+ *		that are upper in hierarchy than immediate cgroup associated
+ *		with *sk*.
+ *
+ *		The format of returned id and helper limitations are same as in
+ *		**bpf_sk_cgroup_id**\ ().
+ *	Return
+ *		The id is returned or 0 in case the id could not be retrieved.
+ *
+ * void *bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags)
+ * 	Description
+ * 		Copy *size* bytes from *data* into a ring buffer *ringbuf*.
+ * 		If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of
+ * 		new data availability is sent.
+ * 		IF BPF_RB_FORCE_WAKEUP is specified in *flags*, notification of
+ * 		new data availability is sent unconditionally.
+ * 	Return
+ * 		0, on success;
+ * 		< 0, on error.
+ *
+ * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags)
+ * 	Description
+ * 		Reserve *size* bytes of payload in a ring buffer *ringbuf*.
+ * 	Return
+ * 		Valid pointer with *size* bytes of memory available; NULL,
+ * 		otherwise.
+ *
+ * void bpf_ringbuf_submit(void *data, u64 flags)
+ * 	Description
+ * 		Submit reserved ring buffer sample, pointed to by *data*.
+ * 		If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of
+ * 		new data availability is sent.
+ * 		IF BPF_RB_FORCE_WAKEUP is specified in *flags*, notification of
+ * 		new data availability is sent unconditionally.
+ * 	Return
+ * 		Nothing. Always succeeds.
+ *
+ * void bpf_ringbuf_discard(void *data, u64 flags)
+ * 	Description
+ * 		Discard reserved ring buffer sample, pointed to by *data*.
+ * 		If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of
+ * 		new data availability is sent.
+ * 		IF BPF_RB_FORCE_WAKEUP is specified in *flags*, notification of
+ * 		new data availability is sent unconditionally.
+ * 	Return
+ * 		Nothing. Always succeeds.
+ *
+ * u64 bpf_ringbuf_query(void *ringbuf, u64 flags)
+ *	Description
+ *		Query various characteristics of provided ring buffer. What
+ *		exactly is queries is determined by *flags*:
+ *		  - BPF_RB_AVAIL_DATA - amount of data not yet consumed;
+ *		  - BPF_RB_RING_SIZE - the size of ring buffer;
+ *		  - BPF_RB_CONS_POS - consumer position (can wrap around);
+ *		  - BPF_RB_PROD_POS - producer(s) position (can wrap around);
+ *		Data returned is just a momentary snapshots of actual values
+ *		and could be inaccurate, so this facility should be used to
+ *		power heuristics and for reporting, not to make 100% correct
+ *		calculation.
+ *	Return
+ *		Requested value, or 0, if flags are not recognized.
+ *
+ * int bpf_csum_level(struct sk_buff *skb, u64 level)
+ * 	Description
+ * 		Change the skbs checksum level by one layer up or down, or
+ * 		reset it entirely to none in order to have the stack perform
+ * 		checksum validation. The level is applicable to the following
+ * 		protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of
+ * 		| ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP |
+ * 		through **bpf_skb_adjust_room**\ () helper with passing in
+ * 		**BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one	call
+ * 		to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since
+ * 		the UDP header is removed. Similarly, an encap of the latter
+ * 		into the former could be accompanied by a helper call to
+ * 		**bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the
+ * 		skb is still intended to be processed in higher layers of the
+ * 		stack instead of just egressing at tc.
+ *
+ * 		There are three supported level settings at this time:
+ *
+ * 		* **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs
+ * 		  with CHECKSUM_UNNECESSARY.
+ * 		* **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs
+ * 		  with CHECKSUM_UNNECESSARY.
+ * 		* **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and
+ * 		  sets CHECKSUM_NONE to force checksum validation by the stack.
+ * 		* **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current
+ * 		  skb->csum_level.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure. In the
+ * 		case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level
+ * 		is returned or the error code -EACCES in case the skb is not
+ * 		subject to CHECKSUM_UNNECESSARY.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3151,7 +3378,18 @@ union bpf_attr {
 	FN(xdp_output),			\
 	FN(get_netns_cookie),		\
 	FN(get_current_ancestor_cgroup_id),	\
-	FN(sk_assign),
+	FN(sk_assign),			\
+	FN(ktime_get_boot_ns),		\
+	FN(seq_printf),			\
+	FN(seq_write),			\
+	FN(sk_cgroup_id),		\
+	FN(sk_ancestor_cgroup_id),	\
+	FN(ringbuf_output),		\
+	FN(ringbuf_reserve),		\
+	FN(ringbuf_submit),		\
+	FN(ringbuf_discard),		\
+	FN(ringbuf_query),		\
+	FN(csum_level),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -3228,6 +3466,14 @@ enum {
 	BPF_F_CURRENT_NETNS		= (-1L),
 };
 
+/* BPF_FUNC_csum_level level values. */
+enum {
+	BPF_CSUM_LEVEL_QUERY,
+	BPF_CSUM_LEVEL_INC,
+	BPF_CSUM_LEVEL_DEC,
+	BPF_CSUM_LEVEL_RESET,
+};
+
 /* BPF_FUNC_skb_adjust_room flags. */
 enum {
 	BPF_F_ADJ_ROOM_FIXED_GSO	= (1ULL << 0),
@@ -3235,6 +3481,7 @@ enum {
 	BPF_F_ADJ_ROOM_ENCAP_L3_IPV6	= (1ULL << 2),
 	BPF_F_ADJ_ROOM_ENCAP_L4_GRE	= (1ULL << 3),
 	BPF_F_ADJ_ROOM_ENCAP_L4_UDP	= (1ULL << 4),
+	BPF_F_ADJ_ROOM_NO_CSUM_RESET	= (1ULL << 5),
 };
 
 enum {
@@ -3261,6 +3508,29 @@ enum {
 	BPF_F_GET_BRANCH_RECORDS_SIZE	= (1ULL << 0),
 };
 
+/* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and
+ * BPF_FUNC_bpf_ringbuf_output flags.
+ */
+enum {
+	BPF_RB_NO_WAKEUP		= (1ULL << 0),
+	BPF_RB_FORCE_WAKEUP		= (1ULL << 1),
+};
+
+/* BPF_FUNC_bpf_ringbuf_query flags */
+enum {
+	BPF_RB_AVAIL_DATA = 0,
+	BPF_RB_RING_SIZE = 1,
+	BPF_RB_CONS_POS = 2,
+	BPF_RB_PROD_POS = 3,
+};
+
+/* BPF ring buffer constants */
+enum {
+	BPF_RINGBUF_BUSY_BIT		= (1U << 31),
+	BPF_RINGBUF_DISCARD_BIT		= (1U << 30),
+	BPF_RINGBUF_HDR_SZ		= 8,
+};
+
 /* Mode for BPF_FUNC_skb_adjust_room helper. */
 enum bpf_adj_room_mode {
 	BPF_ADJ_ROOM_NET,
@@ -3393,6 +3663,7 @@ struct bpf_sock {
 	__u32 dst_ip4;
 	__u32 dst_ip6[4];
 	__u32 state;
+	__s32 rx_queue_mapping;
 };
 
 struct bpf_tcp_sock {
@@ -3486,6 +3757,8 @@ struct xdp_md {
 	/* Below access go through struct xdp_rxq_info */
 	__u32 ingress_ifindex; /* rxq->dev->ifindex */
 	__u32 rx_queue_index;  /* rxq->queue_index  */
+
+	__u32 egress_ifindex;  /* txq->dev->ifindex */
 };
 
 enum sk_action {
@@ -3508,6 +3781,8 @@ struct sk_msg_md {
 	__u32 remote_port;	/* Stored in network byte order */
 	__u32 local_port;	/* stored in host byte order */
 	__u32 size;		/* Total size of sk_msg */
+
+	__bpf_md_ptr(struct bpf_sock *, sk); /* current socket */
 };
 
 struct sk_reuseport_md {
@@ -3598,6 +3873,29 @@ struct bpf_btf_info {
 	__u32 id;
 } __attribute__((aligned(8)));
 
+struct bpf_link_info {
+	__u32 type;
+	__u32 id;
+	__u32 prog_id;
+	union {
+		struct {
+			__aligned_u64 tp_name; /* in/out: tp_name buffer ptr */
+			__u32 tp_name_len;     /* in/out: tp_name buffer len */
+		} raw_tracepoint;
+		struct {
+			__u32 attach_type;
+		} tracing;
+		struct {
+			__u64 cgroup_id;
+			__u32 attach_type;
+		} cgroup;
+		struct  {
+			__u32 netns_ino;
+			__u32 attach_type;
+		} netns;
+	};
+} __attribute__((aligned(8)));
+
 /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
  * by user and intended to be used by socket (e.g. to bind to, depends on
  * attach attach type).
@@ -3610,7 +3908,7 @@ struct bpf_sock_addr {
 	__u32 user_ip6[4];	/* Allows 1,2,4,8-byte read and 4,8-byte write.
 				 * Stored in network byte order.
 				 */
-	__u32 user_port;	/* Allows 4-byte read and write.
+	__u32 user_port;	/* Allows 1,2,4-byte read and 4-byte write.
 				 * Stored in network byte order
 				 */
 	__u32 family;		/* Allows 4-byte read, but no write */
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
index c4532b0fe00f..48ff0757ae5e 100644
--- a/include/uapi/linux/capability.h
+++ b/include/uapi/linux/capability.h
@@ -274,6 +274,7 @@ struct vfs_ns_cap_data {
    arbitrary SCSI commands */
 /* Allow setting encryption key on loopback filesystem */
 /* Allow setting zone reclaim policy */
+/* Allow everything under CAP_BPF and CAP_PERFMON for backward compatibility */
 
 #define CAP_SYS_ADMIN        21
 
@@ -376,7 +377,38 @@ struct vfs_ns_cap_data {
 
 #define CAP_PERFMON		38
 
-#define CAP_LAST_CAP         CAP_PERFMON
+/*
+ * CAP_BPF allows the following BPF operations:
+ * - Creating all types of BPF maps
+ * - Advanced verifier features
+ *   - Indirect variable access
+ *   - Bounded loops
+ *   - BPF to BPF function calls
+ *   - Scalar precision tracking
+ *   - Larger complexity limits
+ *   - Dead code elimination
+ *   - And potentially other features
+ * - Loading BPF Type Format (BTF) data
+ * - Retrieve xlated and JITed code of BPF programs
+ * - Use bpf_spin_lock() helper
+ *
+ * CAP_PERFMON relaxes the verifier checks further:
+ * - BPF progs can use of pointer-to-integer conversions
+ * - speculation attack hardening measures are bypassed
+ * - bpf_probe_read to read arbitrary kernel memory is allowed
+ * - bpf_trace_printk to print kernel memory is allowed
+ *
+ * CAP_SYS_ADMIN is required to use bpf_probe_write_user.
+ *
+ * CAP_SYS_ADMIN is required to iterate system wide loaded
+ * programs, maps, links, BTFs and convert their IDs to file descriptors.
+ *
+ * CAP_PERFMON and CAP_BPF are required to load tracing programs.
+ * CAP_NET_ADMIN and CAP_BPF are required to load networking programs.
+ */
+#define CAP_BPF			39
+
+#define CAP_LAST_CAP         CAP_BPF
 
 #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
 
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 1ae90e06c06d..08563e6a424d 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -233,10 +233,13 @@ enum {
  * @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not
  *                            sent to the CPU.
  * @DEVLINK_TRAP_ACTION_TRAP: The sole copy of the packet is sent to the CPU.
+ * @DEVLINK_TRAP_ACTION_MIRROR: Packet is forwarded by the device and a copy is
+ *                              sent to the CPU.
  */
 enum devlink_trap_action {
 	DEVLINK_TRAP_ACTION_DROP,
 	DEVLINK_TRAP_ACTION_TRAP,
+	DEVLINK_TRAP_ACTION_MIRROR,
 };
 
 /**
@@ -250,10 +253,16 @@ enum devlink_trap_action {
  *                               control plane for resolution. Trapped packets
  *                               are processed by devlink and injected to
  *                               the kernel's Rx path.
+ * @DEVLINK_TRAP_TYPE_CONTROL: Packet was trapped because it is required for
+ *                             the correct functioning of the control plane.
+ *                             For example, an ARP request packet. Trapped
+ *                             packets are injected to the kernel's Rx path,
+ *                             but not reported to drop monitor.
  */
 enum devlink_trap_type {
 	DEVLINK_TRAP_TYPE_DROP,
 	DEVLINK_TRAP_TYPE_EXCEPTION,
+	DEVLINK_TRAP_TYPE_CONTROL,
 };
 
 enum {
diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h
index 0cca19670fd2..ca5cb3e3c6df 100644
--- a/include/uapi/linux/errqueue.h
+++ b/include/uapi/linux/errqueue.h
@@ -36,7 +36,7 @@ struct sock_extended_err {
  *
  *	The timestamping interfaces SO_TIMESTAMPING, MSG_TSTAMP_*
  *	communicate network timestamps by passing this struct in a cmsg with
- *	recvmsg(). See Documentation/networking/timestamping.txt for details.
+ *	recvmsg(). See Documentation/networking/timestamping.rst for details.
  *	User space sees a timespec definition that matches either
  *	__kernel_timespec or __kernel_old_timespec, in the kernel we
  *	require two structure definitions to provide both.
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 92f737f10117..f4662b3a9e1e 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1666,6 +1666,18 @@ static inline int ethtool_validate_duplex(__u8 duplex)
 	return 0;
 }
 
+#define MASTER_SLAVE_CFG_UNSUPPORTED		0
+#define MASTER_SLAVE_CFG_UNKNOWN		1
+#define MASTER_SLAVE_CFG_MASTER_PREFERRED	2
+#define MASTER_SLAVE_CFG_SLAVE_PREFERRED	3
+#define MASTER_SLAVE_CFG_MASTER_FORCE		4
+#define MASTER_SLAVE_CFG_SLAVE_FORCE		5
+#define MASTER_SLAVE_STATE_UNSUPPORTED		0
+#define MASTER_SLAVE_STATE_UNKNOWN		1
+#define MASTER_SLAVE_STATE_MASTER		2
+#define MASTER_SLAVE_STATE_SLAVE		3
+#define MASTER_SLAVE_STATE_ERR			4
+
 /* Which connector port. */
 #define PORT_TP			0x00
 #define PORT_AUI		0x01
@@ -1904,7 +1916,9 @@ struct ethtool_link_settings {
 	__u8	eth_tp_mdix_ctrl;
 	__s8	link_mode_masks_nwords;
 	__u8	transceiver;
-	__u8	reserved1[3];
+	__u8	master_slave_cfg;
+	__u8	master_slave_state;
+	__u8	reserved1[1];
 	__u32	reserved[7];
 	__u32	link_mode_masks[0];
 	/* layout of link_mode_masks fields:
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 1711e57f7848..4dda5e4244a7 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -39,6 +39,8 @@ enum {
 	ETHTOOL_MSG_EEE_GET,
 	ETHTOOL_MSG_EEE_SET,
 	ETHTOOL_MSG_TSINFO_GET,
+	ETHTOOL_MSG_CABLE_TEST_ACT,
+	ETHTOOL_MSG_CABLE_TEST_TDR_ACT,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -74,6 +76,8 @@ enum {
 	ETHTOOL_MSG_EEE_GET_REPLY,
 	ETHTOOL_MSG_EEE_NTF,
 	ETHTOOL_MSG_TSINFO_GET_REPLY,
+	ETHTOOL_MSG_CABLE_TEST_NTF,
+	ETHTOOL_MSG_CABLE_TEST_TDR_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -216,6 +220,8 @@ enum {
 	ETHTOOL_A_LINKMODES_PEER,		/* bitset */
 	ETHTOOL_A_LINKMODES_SPEED,		/* u32 */
 	ETHTOOL_A_LINKMODES_DUPLEX,		/* u8 */
+	ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG,	/* u8 */
+	ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE,	/* u8 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_LINKMODES_CNT,
@@ -228,6 +234,8 @@ enum {
 	ETHTOOL_A_LINKSTATE_UNSPEC,
 	ETHTOOL_A_LINKSTATE_HEADER,		/* nest - _A_HEADER_* */
 	ETHTOOL_A_LINKSTATE_LINK,		/* u8 */
+	ETHTOOL_A_LINKSTATE_SQI,		/* u32 */
+	ETHTOOL_A_LINKSTATE_SQI_MAX,		/* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_LINKSTATE_CNT,
@@ -403,6 +411,149 @@ enum {
 	ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1)
 };
 
+/* CABLE TEST */
+
+enum {
+	ETHTOOL_A_CABLE_TEST_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_HEADER,		/* nest - _A_HEADER_* */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_CNT,
+	ETHTOOL_A_CABLE_TEST_MAX = __ETHTOOL_A_CABLE_TEST_CNT - 1
+};
+
+/* CABLE TEST NOTIFY */
+enum {
+	ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC,
+	ETHTOOL_A_CABLE_RESULT_CODE_OK,
+	ETHTOOL_A_CABLE_RESULT_CODE_OPEN,
+	ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT,
+	ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT,
+};
+
+enum {
+	ETHTOOL_A_CABLE_PAIR_A,
+	ETHTOOL_A_CABLE_PAIR_B,
+	ETHTOOL_A_CABLE_PAIR_C,
+	ETHTOOL_A_CABLE_PAIR_D,
+};
+
+enum {
+	ETHTOOL_A_CABLE_RESULT_UNSPEC,
+	ETHTOOL_A_CABLE_RESULT_PAIR,		/* u8 ETHTOOL_A_CABLE_PAIR_ */
+	ETHTOOL_A_CABLE_RESULT_CODE,		/* u8 ETHTOOL_A_CABLE_RESULT_CODE_ */
+
+	__ETHTOOL_A_CABLE_RESULT_CNT,
+	ETHTOOL_A_CABLE_RESULT_MAX = (__ETHTOOL_A_CABLE_RESULT_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_FAULT_LENGTH_UNSPEC,
+	ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR,	/* u8 ETHTOOL_A_CABLE_PAIR_ */
+	ETHTOOL_A_CABLE_FAULT_LENGTH_CM,	/* u32 */
+
+	__ETHTOOL_A_CABLE_FAULT_LENGTH_CNT,
+	ETHTOOL_A_CABLE_FAULT_LENGTH_MAX = (__ETHTOOL_A_CABLE_FAULT_LENGTH_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_TEST_NTF_STATUS_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED,
+	ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED
+};
+
+enum {
+	ETHTOOL_A_CABLE_NEST_UNSPEC,
+	ETHTOOL_A_CABLE_NEST_RESULT,		/* nest - ETHTOOL_A_CABLE_RESULT_ */
+	ETHTOOL_A_CABLE_NEST_FAULT_LENGTH,	/* nest - ETHTOOL_A_CABLE_FAULT_LENGTH_ */
+	__ETHTOOL_A_CABLE_NEST_CNT,
+	ETHTOOL_A_CABLE_NEST_MAX = (__ETHTOOL_A_CABLE_NEST_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_TEST_NTF_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_NTF_HEADER,	/* nest - ETHTOOL_A_HEADER_* */
+	ETHTOOL_A_CABLE_TEST_NTF_STATUS,	/* u8 - _STARTED/_COMPLETE */
+	ETHTOOL_A_CABLE_TEST_NTF_NEST,		/* nest - of results: */
+
+	__ETHTOOL_A_CABLE_TEST_NTF_CNT,
+	ETHTOOL_A_CABLE_TEST_NTF_MAX = (__ETHTOOL_A_CABLE_TEST_NTF_CNT - 1)
+};
+
+/* CABLE TEST TDR */
+
+enum {
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST,		/* u32 */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST,		/* u32 */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP,		/* u32 */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR,		/* u8 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_TDR_CFG_CNT,
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX = __ETHTOOL_A_CABLE_TEST_TDR_CFG_CNT - 1
+};
+
+enum {
+	ETHTOOL_A_CABLE_TEST_TDR_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_TDR_HEADER,	/* nest - _A_HEADER_* */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG,		/* nest - *_TDR_CFG_* */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_TDR_CNT,
+	ETHTOOL_A_CABLE_TEST_TDR_MAX = __ETHTOOL_A_CABLE_TEST_TDR_CNT - 1
+};
+
+/* CABLE TEST TDR NOTIFY */
+
+enum {
+	ETHTOOL_A_CABLE_AMPLITUDE_UNSPEC,
+	ETHTOOL_A_CABLE_AMPLITUDE_PAIR,         /* u8 */
+	ETHTOOL_A_CABLE_AMPLITUDE_mV,           /* s16 */
+
+	__ETHTOOL_A_CABLE_AMPLITUDE_CNT,
+	ETHTOOL_A_CABLE_AMPLITUDE_MAX = (__ETHTOOL_A_CABLE_AMPLITUDE_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_PULSE_UNSPEC,
+	ETHTOOL_A_CABLE_PULSE_mV,		/* s16 */
+
+	__ETHTOOL_A_CABLE_PULSE_CNT,
+	ETHTOOL_A_CABLE_PULSE_MAX = (__ETHTOOL_A_CABLE_PULSE_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_STEP_UNSPEC,
+	ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE,	/* u32 */
+	ETHTOOL_A_CABLE_STEP_LAST_DISTANCE,	/* u32 */
+	ETHTOOL_A_CABLE_STEP_STEP_DISTANCE,	/* u32 */
+
+	__ETHTOOL_A_CABLE_STEP_CNT,
+	ETHTOOL_A_CABLE_STEP_MAX = (__ETHTOOL_A_CABLE_STEP_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_TDR_NEST_UNSPEC,
+	ETHTOOL_A_CABLE_TDR_NEST_STEP,		/* nest - ETHTTOOL_A_CABLE_STEP */
+	ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE,	/* nest - ETHTOOL_A_CABLE_AMPLITUDE */
+	ETHTOOL_A_CABLE_TDR_NEST_PULSE,		/* nest - ETHTOOL_A_CABLE_PULSE */
+
+	__ETHTOOL_A_CABLE_TDR_NEST_CNT,
+	ETHTOOL_A_CABLE_TDR_NEST_MAX = (__ETHTOOL_A_CABLE_TDR_NEST_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_HEADER,	/* nest - ETHTOOL_A_HEADER_* */
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_STATUS,	/* u8 - _STARTED/_COMPLETE */
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST,	/* nest - of results: */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_TDR_NTF_CNT,
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_MAX = __ETHTOOL_A_CABLE_TEST_TDR_NTF_CNT - 1
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h
index 877f7fa95466..9c0636ec2286 100644
--- a/include/uapi/linux/genetlink.h
+++ b/include/uapi/linux/genetlink.h
@@ -48,6 +48,7 @@ enum {
 	CTRL_CMD_NEWMCAST_GRP,
 	CTRL_CMD_DELMCAST_GRP,
 	CTRL_CMD_GETMCAST_GRP, /* unused */
+	CTRL_CMD_GETPOLICY,
 	__CTRL_CMD_MAX,
 };
 
@@ -62,6 +63,7 @@ enum {
 	CTRL_ATTR_MAXATTR,
 	CTRL_ATTR_OPS,
 	CTRL_ATTR_MCAST_GROUPS,
+	CTRL_ATTR_POLICY,
 	__CTRL_ATTR_MAX,
 };
 
diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h
index be714cd8c826..797ba2c1562a 100644
--- a/include/uapi/linux/if.h
+++ b/include/uapi/linux/if.h
@@ -178,6 +178,7 @@ enum {
 enum {
 	IF_LINK_MODE_DEFAULT,
 	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
+	IF_LINK_MODE_TESTING,	/* limit upward transition to testing */
 };
 
 /*
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index bfe621ea51b3..caa6914a3e53 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -120,6 +120,7 @@ enum {
 	IFLA_BRIDGE_MODE,
 	IFLA_BRIDGE_VLAN_INFO,
 	IFLA_BRIDGE_VLAN_TUNNEL_INFO,
+	IFLA_BRIDGE_MRP,
 	__IFLA_BRIDGE_MAX,
 };
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
@@ -157,6 +158,101 @@ struct bridge_vlan_xstats {
 	__u32 pad2;
 };
 
+enum {
+	IFLA_BRIDGE_MRP_UNSPEC,
+	IFLA_BRIDGE_MRP_INSTANCE,
+	IFLA_BRIDGE_MRP_PORT_STATE,
+	IFLA_BRIDGE_MRP_PORT_ROLE,
+	IFLA_BRIDGE_MRP_RING_STATE,
+	IFLA_BRIDGE_MRP_RING_ROLE,
+	IFLA_BRIDGE_MRP_START_TEST,
+	__IFLA_BRIDGE_MRP_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_MAX (__IFLA_BRIDGE_MRP_MAX - 1)
+
+enum {
+	IFLA_BRIDGE_MRP_INSTANCE_UNSPEC,
+	IFLA_BRIDGE_MRP_INSTANCE_RING_ID,
+	IFLA_BRIDGE_MRP_INSTANCE_P_IFINDEX,
+	IFLA_BRIDGE_MRP_INSTANCE_S_IFINDEX,
+	IFLA_BRIDGE_MRP_INSTANCE_PRIO,
+	__IFLA_BRIDGE_MRP_INSTANCE_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_INSTANCE_MAX (__IFLA_BRIDGE_MRP_INSTANCE_MAX - 1)
+
+enum {
+	IFLA_BRIDGE_MRP_PORT_STATE_UNSPEC,
+	IFLA_BRIDGE_MRP_PORT_STATE_STATE,
+	__IFLA_BRIDGE_MRP_PORT_STATE_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_PORT_STATE_MAX (__IFLA_BRIDGE_MRP_PORT_STATE_MAX - 1)
+
+enum {
+	IFLA_BRIDGE_MRP_PORT_ROLE_UNSPEC,
+	IFLA_BRIDGE_MRP_PORT_ROLE_ROLE,
+	__IFLA_BRIDGE_MRP_PORT_ROLE_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_PORT_ROLE_MAX (__IFLA_BRIDGE_MRP_PORT_ROLE_MAX - 1)
+
+enum {
+	IFLA_BRIDGE_MRP_RING_STATE_UNSPEC,
+	IFLA_BRIDGE_MRP_RING_STATE_RING_ID,
+	IFLA_BRIDGE_MRP_RING_STATE_STATE,
+	__IFLA_BRIDGE_MRP_RING_STATE_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_RING_STATE_MAX (__IFLA_BRIDGE_MRP_RING_STATE_MAX - 1)
+
+enum {
+	IFLA_BRIDGE_MRP_RING_ROLE_UNSPEC,
+	IFLA_BRIDGE_MRP_RING_ROLE_RING_ID,
+	IFLA_BRIDGE_MRP_RING_ROLE_ROLE,
+	__IFLA_BRIDGE_MRP_RING_ROLE_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_RING_ROLE_MAX (__IFLA_BRIDGE_MRP_RING_ROLE_MAX - 1)
+
+enum {
+	IFLA_BRIDGE_MRP_START_TEST_UNSPEC,
+	IFLA_BRIDGE_MRP_START_TEST_RING_ID,
+	IFLA_BRIDGE_MRP_START_TEST_INTERVAL,
+	IFLA_BRIDGE_MRP_START_TEST_MAX_MISS,
+	IFLA_BRIDGE_MRP_START_TEST_PERIOD,
+	IFLA_BRIDGE_MRP_START_TEST_MONITOR,
+	__IFLA_BRIDGE_MRP_START_TEST_MAX,
+};
+
+#define IFLA_BRIDGE_MRP_START_TEST_MAX (__IFLA_BRIDGE_MRP_START_TEST_MAX - 1)
+
+struct br_mrp_instance {
+	__u32 ring_id;
+	__u32 p_ifindex;
+	__u32 s_ifindex;
+	__u16 prio;
+};
+
+struct br_mrp_ring_state {
+	__u32 ring_id;
+	__u32 ring_state;
+};
+
+struct br_mrp_ring_role {
+	__u32 ring_id;
+	__u32 ring_role;
+};
+
+struct br_mrp_start_test {
+	__u32 ring_id;
+	__u32 interval;
+	__u32 max_miss;
+	__u32 period;
+	__u32 monitor;
+};
+
 struct bridge_stp_xstats {
 	__u64 transition_blk;
 	__u64 transition_fwd;
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index f6ceb2e63d1e..d6de2b167448 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -92,6 +92,7 @@
 #define ETH_P_PREAUTH	0x88C7		/* 802.11 Preauthentication */
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_LLDP	0x88CC		/* Link Layer Discovery Protocol */
+#define ETH_P_MRP	0x88E3		/* Media Redundancy Protocol	*/
 #define ETH_P_MACSEC	0x88E5		/* 802.1ae MACsec */
 #define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
 #define ETH_P_MVRP	0x88F5          /* 802.1Q MVRP                  */
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 127c704eeba9..a009365ad67b 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -343,6 +343,7 @@ enum {
 	IFLA_BRPORT_NEIGH_SUPPRESS,
 	IFLA_BRPORT_ISOLATED,
 	IFLA_BRPORT_BACKUP_PORT,
+	IFLA_BRPORT_MRP_RING_OPEN,
 	__IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
diff --git a/include/uapi/linux/if_x25.h b/include/uapi/linux/if_x25.h
index 5d962448345f..3a5938e38370 100644
--- a/include/uapi/linux/if_x25.h
+++ b/include/uapi/linux/if_x25.h
@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 
-/* Documentation/networking/x25-iface.txt */
+/* Documentation/networking/x25-iface.rst */
 #define X25_IFACE_DATA		0x00
 #define X25_IFACE_CONNECT	0x01
 #define X25_IFACE_DISCONNECT	0x02
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
index 57cc429a9177..e6f183ee8417 100644
--- a/include/uapi/linux/inet_diag.h
+++ b/include/uapi/linux/inet_diag.h
@@ -96,6 +96,7 @@ enum {
 	INET_DIAG_BC_MARK_COND,
 	INET_DIAG_BC_S_EQ,
 	INET_DIAG_BC_D_EQ,
+	INET_DIAG_BC_CGROUP_COND,   /* u64 cgroup v2 ID */
 };
 
 struct inet_diag_hostcond {
@@ -157,6 +158,7 @@ enum {
 	INET_DIAG_MD5SIG,
 	INET_DIAG_ULP_INFO,
 	INET_DIAG_SK_BPF_STORAGES,
+	INET_DIAG_CGROUP_ID,
 	__INET_DIAG_MAX,
 };
 
diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h
index 90f9b4e1ba27..39f7c44baf53 100644
--- a/include/uapi/linux/mii.h
+++ b/include/uapi/linux/mii.h
@@ -151,11 +151,13 @@
 /* 1000BASE-T Control register */
 #define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
 #define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
+#define CTL1000_PREFER_MASTER	0x0400  /* prefer to operate as master */
 #define CTL1000_AS_MASTER	0x0800
 #define CTL1000_ENABLE_MASTER	0x1000
 
 /* 1000BASE-T Status register */
 #define LPA_1000MSFAIL		0x8000	/* Master/Slave resolution failure */
+#define LPA_1000MSRES		0x4000	/* Master/Slave resolution status */
 #define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
 #define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
 #define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h
new file mode 100644
index 000000000000..84f15f48a7cb
--- /dev/null
+++ b/include/uapi/linux/mrp_bridge.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+
+#ifndef _UAPI_LINUX_MRP_BRIDGE_H_
+#define _UAPI_LINUX_MRP_BRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#define MRP_MAX_FRAME_LENGTH		200
+#define MRP_DEFAULT_PRIO		0x8000
+#define MRP_DOMAIN_UUID_LENGTH		16
+#define MRP_VERSION			1
+#define MRP_FRAME_PRIO			7
+#define MRP_OUI_LENGTH			3
+#define MRP_MANUFACTURE_DATA_LENGTH	2
+
+enum br_mrp_ring_role_type {
+	BR_MRP_RING_ROLE_DISABLED,
+	BR_MRP_RING_ROLE_MRC,
+	BR_MRP_RING_ROLE_MRM,
+	BR_MRP_RING_ROLE_MRA,
+};
+
+enum br_mrp_ring_state_type {
+	BR_MRP_RING_STATE_OPEN,
+	BR_MRP_RING_STATE_CLOSED,
+};
+
+enum br_mrp_port_state_type {
+	BR_MRP_PORT_STATE_DISABLED,
+	BR_MRP_PORT_STATE_BLOCKED,
+	BR_MRP_PORT_STATE_FORWARDING,
+	BR_MRP_PORT_STATE_NOT_CONNECTED,
+};
+
+enum br_mrp_port_role_type {
+	BR_MRP_PORT_ROLE_PRIMARY,
+	BR_MRP_PORT_ROLE_SECONDARY,
+	BR_MRP_PORT_ROLE_NONE,
+};
+
+enum br_mrp_tlv_header_type {
+	BR_MRP_TLV_HEADER_END = 0x0,
+	BR_MRP_TLV_HEADER_COMMON = 0x1,
+	BR_MRP_TLV_HEADER_RING_TEST = 0x2,
+	BR_MRP_TLV_HEADER_RING_TOPO = 0x3,
+	BR_MRP_TLV_HEADER_RING_LINK_DOWN = 0x4,
+	BR_MRP_TLV_HEADER_RING_LINK_UP = 0x5,
+	BR_MRP_TLV_HEADER_OPTION = 0x7f,
+};
+
+enum br_mrp_sub_tlv_header_type {
+	BR_MRP_SUB_TLV_HEADER_TEST_MGR_NACK = 0x1,
+	BR_MRP_SUB_TLV_HEADER_TEST_PROPAGATE = 0x2,
+	BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR = 0x3,
+};
+
+struct br_mrp_tlv_hdr {
+	__u8 type;
+	__u8 length;
+};
+
+struct br_mrp_sub_tlv_hdr {
+	__u8 type;
+	__u8 length;
+};
+
+struct br_mrp_end_hdr {
+	struct br_mrp_tlv_hdr hdr;
+};
+
+struct br_mrp_common_hdr {
+	__be16 seq_id;
+	__u8 domain[MRP_DOMAIN_UUID_LENGTH];
+};
+
+struct br_mrp_ring_test_hdr {
+	__be16 prio;
+	__u8 sa[ETH_ALEN];
+	__be16 port_role;
+	__be16 state;
+	__be16 transitions;
+	__be32 timestamp;
+};
+
+struct br_mrp_ring_topo_hdr {
+	__be16 prio;
+	__u8 sa[ETH_ALEN];
+	__be16 interval;
+};
+
+struct br_mrp_ring_link_hdr {
+	__u8 sa[ETH_ALEN];
+	__be16 port_role;
+	__be16 interval;
+	__be16 blocked;
+};
+
+struct br_mrp_sub_opt_hdr {
+	__u8 type;
+	__u8 manufacture_data[MRP_MANUFACTURE_DATA_LENGTH];
+};
+
+struct br_mrp_test_mgr_nack_hdr {
+	__be16 prio;
+	__u8 sa[ETH_ALEN];
+	__be16 other_prio;
+	__u8 other_sa[ETH_ALEN];
+};
+
+struct br_mrp_test_prop_hdr {
+	__be16 prio;
+	__u8 sa[ETH_ALEN];
+	__be16 other_prio;
+	__u8 other_sa[ETH_ALEN];
+};
+
+struct br_mrp_oui_hdr {
+	__u8 oui[MRP_OUI_LENGTH];
+};
+
+#endif
diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h
index cd144e3099a3..eefcda8ca44e 100644
--- a/include/uapi/linux/neighbour.h
+++ b/include/uapi/linux/neighbour.h
@@ -29,6 +29,7 @@ enum {
 	NDA_LINK_NETNSID,
 	NDA_SRC_VNI,
 	NDA_PROTOCOL,  /* Originator of entry */
+	NDA_NH_ID,
 	__NDA_MAX
 };
 
diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h
index b6f0bb1dc799..4b3395082d15 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_common.h
@@ -114,15 +114,19 @@ enum ip_conntrack_status {
 	IPS_OFFLOAD_BIT = 14,
 	IPS_OFFLOAD = (1 << IPS_OFFLOAD_BIT),
 
+	/* Conntrack has been offloaded to hardware. */
+	IPS_HW_OFFLOAD_BIT = 15,
+	IPS_HW_OFFLOAD = (1 << IPS_HW_OFFLOAD_BIT),
+
 	/* Be careful here, modifying these bits can make things messy,
 	 * so don't let users modify them directly.
 	 */
 	IPS_UNCHANGEABLE_MASK = (IPS_NAT_DONE_MASK | IPS_NAT_MASK |
 				 IPS_EXPECTED | IPS_CONFIRMED | IPS_DYING |
 				 IPS_SEQ_ADJUST | IPS_TEMPLATE | IPS_UNTRACKED |
-				 IPS_OFFLOAD),
+				 IPS_OFFLOAD | IPS_HW_OFFLOAD),
 
-	__IPS_MAX_BIT = 15,
+	__IPS_MAX_BIT = 16,
 };
 
 /* Connection tracking event types */
diff --git a/include/uapi/linux/netfilter/nf_nat.h b/include/uapi/linux/netfilter/nf_nat.h
index 4a95c0db14d4..a64586e77b24 100644
--- a/include/uapi/linux/netfilter/nf_nat.h
+++ b/include/uapi/linux/netfilter/nf_nat.h
@@ -11,6 +11,7 @@
 #define NF_NAT_RANGE_PERSISTENT			(1 << 3)
 #define NF_NAT_RANGE_PROTO_RANDOM_FULLY		(1 << 4)
 #define NF_NAT_RANGE_PROTO_OFFSET		(1 << 5)
+#define NF_NAT_RANGE_NETMAP			(1 << 6)
 
 #define NF_NAT_RANGE_PROTO_RANDOM_ALL		\
 	(NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY)
@@ -18,7 +19,8 @@
 #define NF_NAT_RANGE_MASK					\
 	(NF_NAT_RANGE_MAP_IPS | NF_NAT_RANGE_PROTO_SPECIFIED |	\
 	 NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PERSISTENT |	\
-	 NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET)
+	 NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET | \
+	 NF_NAT_RANGE_NETMAP)
 
 struct nf_nat_ipv4_range {
 	unsigned int			flags;
diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
index 1d41810d17e2..262881792671 100644
--- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
@@ -55,6 +55,7 @@ enum ctattr_type {
 	CTA_LABELS,
 	CTA_LABELS_MASK,
 	CTA_SYNPROXY,
+	CTA_FILTER,
 	__CTA_MAX
 };
 #define CTA_MAX (__CTA_MAX - 1)
@@ -276,4 +277,12 @@ enum ctattr_expect_stats {
 };
 #define CTA_STATS_EXP_MAX (__CTA_STATS_EXP_MAX - 1)
 
+enum ctattr_filter {
+	CTA_FILTER_UNSPEC,
+	CTA_FILTER_ORIG_FLAGS,
+	CTA_FILTER_REPLY_FLAGS,
+	__CTA_FILTER_MAX
+};
+#define CTA_FILTER_MAX (__CTA_FILTER_MAX - 1)
+
 #endif /* _IPCONNTRACK_NETLINK_H */
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
index 0a4d73317759..eac8a6a648ea 100644
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -249,4 +249,107 @@ struct nla_bitfield32 {
 	__u32 selector;
 };
 
+/*
+ * policy descriptions - it's specific to each family how this is used
+ * Normally, it should be retrieved via a dump inside another attribute
+ * specifying where it applies.
+ */
+
+/**
+ * enum netlink_attribute_type - type of an attribute
+ * @NL_ATTR_TYPE_INVALID: unused
+ * @NL_ATTR_TYPE_FLAG: flag attribute (present/not present)
+ * @NL_ATTR_TYPE_U8: 8-bit unsigned attribute
+ * @NL_ATTR_TYPE_U16: 16-bit unsigned attribute
+ * @NL_ATTR_TYPE_U32: 32-bit unsigned attribute
+ * @NL_ATTR_TYPE_U64: 64-bit unsigned attribute
+ * @NL_ATTR_TYPE_S8: 8-bit signed attribute
+ * @NL_ATTR_TYPE_S16: 16-bit signed attribute
+ * @NL_ATTR_TYPE_S32: 32-bit signed attribute
+ * @NL_ATTR_TYPE_S64: 64-bit signed attribute
+ * @NL_ATTR_TYPE_BINARY: binary data, min/max length may be specified
+ * @NL_ATTR_TYPE_STRING: string, min/max length may be specified
+ * @NL_ATTR_TYPE_NUL_STRING: NUL-terminated string,
+ *	min/max length may be specified
+ * @NL_ATTR_TYPE_NESTED: nested, i.e. the content of this attribute
+ *	consists of sub-attributes. The nested policy and maxtype
+ *	inside may be specified.
+ * @NL_ATTR_TYPE_NESTED_ARRAY: nested array, i.e. the content of this
+ *	attribute contains sub-attributes whose type is irrelevant
+ *	(just used to separate the array entries) and each such array
+ *	entry has attributes again, the policy for those inner ones
+ *	and the corresponding maxtype may be specified.
+ * @NL_ATTR_TYPE_BITFIELD32: &struct nla_bitfield32 attribute
+ */
+enum netlink_attribute_type {
+	NL_ATTR_TYPE_INVALID,
+
+	NL_ATTR_TYPE_FLAG,
+
+	NL_ATTR_TYPE_U8,
+	NL_ATTR_TYPE_U16,
+	NL_ATTR_TYPE_U32,
+	NL_ATTR_TYPE_U64,
+
+	NL_ATTR_TYPE_S8,
+	NL_ATTR_TYPE_S16,
+	NL_ATTR_TYPE_S32,
+	NL_ATTR_TYPE_S64,
+
+	NL_ATTR_TYPE_BINARY,
+	NL_ATTR_TYPE_STRING,
+	NL_ATTR_TYPE_NUL_STRING,
+
+	NL_ATTR_TYPE_NESTED,
+	NL_ATTR_TYPE_NESTED_ARRAY,
+
+	NL_ATTR_TYPE_BITFIELD32,
+};
+
+/**
+ * enum netlink_policy_type_attr - policy type attributes
+ * @NL_POLICY_TYPE_ATTR_UNSPEC: unused
+ * @NL_POLICY_TYPE_ATTR_TYPE: type of the attribute,
+ *	&enum netlink_attribute_type (U32)
+ * @NL_POLICY_TYPE_ATTR_MIN_VALUE_S: minimum value for signed
+ *	integers (S64)
+ * @NL_POLICY_TYPE_ATTR_MAX_VALUE_S: maximum value for signed
+ *	integers (S64)
+ * @NL_POLICY_TYPE_ATTR_MIN_VALUE_U: minimum value for unsigned
+ *	integers (U64)
+ * @NL_POLICY_TYPE_ATTR_MAX_VALUE_U: maximum value for unsigned
+ *	integers (U64)
+ * @NL_POLICY_TYPE_ATTR_MIN_LENGTH: minimum length for binary
+ *	attributes, no minimum if not given (U32)
+ * @NL_POLICY_TYPE_ATTR_MAX_LENGTH: maximum length for binary
+ *	attributes, no maximum if not given (U32)
+ * @NL_POLICY_TYPE_ATTR_POLICY_IDX: sub policy for nested and
+ *	nested array types (U32)
+ * @NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE: maximum sub policy
+ *	attribute for nested and nested array types, this can
+ *	in theory be < the size of the policy pointed to by
+ *	the index, if limited inside the nesting (U32)
+ * @NL_POLICY_TYPE_ATTR_BITFIELD32_MASK: valid mask for the
+ *	bitfield32 type (U32)
+ * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment
+ */
+enum netlink_policy_type_attr {
+	NL_POLICY_TYPE_ATTR_UNSPEC,
+	NL_POLICY_TYPE_ATTR_TYPE,
+	NL_POLICY_TYPE_ATTR_MIN_VALUE_S,
+	NL_POLICY_TYPE_ATTR_MAX_VALUE_S,
+	NL_POLICY_TYPE_ATTR_MIN_VALUE_U,
+	NL_POLICY_TYPE_ATTR_MAX_VALUE_U,
+	NL_POLICY_TYPE_ATTR_MIN_LENGTH,
+	NL_POLICY_TYPE_ATTR_MAX_LENGTH,
+	NL_POLICY_TYPE_ATTR_POLICY_IDX,
+	NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE,
+	NL_POLICY_TYPE_ATTR_BITFIELD32_MASK,
+	NL_POLICY_TYPE_ATTR_PAD,
+
+	/* keep last */
+	__NL_POLICY_TYPE_ATTR_MAX,
+	NL_POLICY_TYPE_ATTR_MAX = __NL_POLICY_TYPE_ATTR_MAX - 1
+};
+
 #endif /* _UAPI__LINUX_NETLINK_H */
diff --git a/include/uapi/linux/nexthop.h b/include/uapi/linux/nexthop.h
index 7b61867e9848..2d4a1e784cf0 100644
--- a/include/uapi/linux/nexthop.h
+++ b/include/uapi/linux/nexthop.h
@@ -49,6 +49,9 @@ enum {
 	NHA_GROUPS,	/* flag; only return nexthop groups in dump */
 	NHA_MASTER,	/* u32;  only return nexthops with given master dev */
 
+	NHA_FDB,	/* flag; nexthop belongs to a bridge fdb */
+	/* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */
+
 	__NHA_MAX,
 };
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 2b691161830f..dad8c8f8581f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -296,13 +296,14 @@
  *	to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
- *	attributes determining the channel width; this is used for setting
- *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- *	instead, the support here is for backward compatibility only.
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
+ *	channel width; this is used for setting monitor mode channel),
+ *	%NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
+ *	%NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
+ *	%NL80211_ATTR_WIPHY_RTS_THRESHOLD.  However, for setting the channel,
+ *	see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
+ *	compatibility only.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -351,7 +352,8 @@
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
+ *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
+ *	attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
  * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
  * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
@@ -536,11 +538,12 @@
  *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- *	to be added to the frame.
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
+ *	authentication type. %NL80211_ATTR_IE is used to define IEs
+ *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
+ *	to the frame.
  *	When used as an event, this reports reception of an Authentication
  *	frame in station and IBSS modes when the local MLME processed the
  *	frame, i.e., it was for the local STA and was received in correct
@@ -595,8 +598,9 @@
  *	requests to connect to a specified network but without separating
  *	auth and assoc steps. For this, you need to specify the SSID in a
  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
+ *	%NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
  *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
@@ -687,6 +691,10 @@
  *	four bytes for vendor frames including the OUI. The registration
  *	cannot be dropped, but is removed automatically when the netlink
  *	socket is closed. Multiple registrations can be made.
+ *	The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
+ *	%NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
+ *	case the registration can also be modified to include/exclude the
+ *	flag, rather than requiring unregistration to change it.
  * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
  *	backward compatibility
  * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
@@ -1151,6 +1159,17 @@
  * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
  *	is passed using %NL80211_ATTR_TID_CONFIG attribute.
  *
+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
+ *	frame. This event is used to indicate that a received Beacon frame was
+ *	dropped because it did not include a valid MME MIC while beacon
+ *	protection was enabled (BIGTK configured in station mode).
+ *
+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
+ *	port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
+ *	%NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
+ *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+ *	if the recipient acknowledged the frame.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1377,6 +1396,10 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_TID_CONFIG,
 
+	NL80211_CMD_UNPROT_BEACON,
+
+	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1422,7 +1445,8 @@ enum nl80211_commands {
  *	of &enum nl80211_chan_width, describing the channel width. See the
  *	documentation of the enum for more information.
  * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- *	channel, used for anything but 20 MHz bandwidth
+ *	channel, used for anything but 20 MHz bandwidth. In S1G this is the
+ *	operating channel center frequency.
  * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
  *	channel, used only for 80+80 MHz bandwidth
  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
@@ -2469,6 +2493,17 @@ enum nl80211_commands {
  *	entry without having to force a disconnection after the PMK timeout. If
  *	no roaming occurs between the reauth threshold and PMK expiration,
  *	disassociation is still forced.
+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
+ *	%NL80211_CMD_REGISTER_FRAME command, see the description there.
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
+ *	%NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
+ *	an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
+ *	first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
+ *
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
+ *	association request when used with NL80211_CMD_NEW_STATION).
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2945,6 +2980,13 @@ enum nl80211_attrs {
 	NL80211_ATTR_PMK_LIFETIME,
 	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
 
+	NL80211_ATTR_RECEIVE_MULTICAST,
+	NL80211_ATTR_WIPHY_FREQ_OFFSET,
+	NL80211_ATTR_CENTER_FREQ1_OFFSET,
+	NL80211_ATTR_SCAN_FREQ_KHZ,
+
+	NL80211_ATTR_HE_6GHZ_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3523,6 +3565,8 @@ enum nl80211_mpath_info {
  *     defined in HE capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
  *     defined
+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
+ *	given for all 6 GHz band channels
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_band_iftype_attr {
@@ -3533,6 +3577,7 @@ enum nl80211_band_iftype_attr {
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
+	NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
 
 	/* keep last */
 	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -3666,6 +3711,7 @@ enum nl80211_wmm_rule {
  *	(see &enum nl80211_wmm_rule)
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *	in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3696,6 +3742,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 	NL80211_FREQUENCY_ATTR_WMM,
 	NL80211_FREQUENCY_ATTR_NO_HE,
+	NL80211_FREQUENCY_ATTR_OFFSET,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4466,6 +4513,7 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
  *	Contains a nested array of signal strength attributes (u8, dBm),
  *	using the nesting index as the antenna number.
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -4490,6 +4538,7 @@ enum nl80211_bss {
 	NL80211_BSS_PARENT_TSF,
 	NL80211_BSS_PARENT_BSSID,
 	NL80211_BSS_CHAIN_SIGNAL,
+	NL80211_BSS_FREQUENCY_OFFSET,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -4800,6 +4849,17 @@ enum nl80211_tid_config {
 	NL80211_TID_CONFIG_DISABLE,
 };
 
+/* enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
+
 /* enum nl80211_tid_config_attr - TID specific configuration.
  * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
  * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
@@ -4807,12 +4867,10 @@ enum nl80211_tid_config {
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer
- *	is selected, if set indicates that the new configuration overrides
- *	all previous peer configurations, otherwise previous peer specific
- *	configurations should be left untouched. If peer is selected then
- *	it will reset particular TID configuration of that peer and it will
- *	not accept other TID config attributes along with peer.
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ *	that the new configuration overrides all previous peer
+ *	configurations, otherwise previous peer specific configurations
+ *	should be left untouched.
  * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
  *	Its type is u16.
  * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
@@ -4828,12 +4886,23 @@ enum nl80211_tid_config {
  *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
  *	the max value is advertised by the driver in this attribute on
  *	output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
- *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
- *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
  *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
  *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
+ *	to notfiy the driver that what type of txrate should be used
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
+ *	the values form &nl80211_tx_rate_setting.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES.
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station.
  */
 enum nl80211_tid_config_attr {
 	__NL80211_TID_CONFIG_ATTR_INVALID,
@@ -4847,6 +4916,9 @@ enum nl80211_tid_config_attr {
 	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
 	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
 	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+	NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
+	NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
+	NL80211_TID_CONFIG_ATTR_TX_RATE,
 
 	/* keep last */
 	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
@@ -5324,6 +5396,8 @@ enum plink_actions {
 
 #define NL80211_KCK_LEN			16
 #define NL80211_KEK_LEN			16
+#define NL80211_KCK_EXT_LEN		24
+#define NL80211_KEK_EXT_LEN		32
 #define NL80211_REPLAY_CTR_LEN		8
 
 /**
@@ -5332,6 +5406,7 @@ enum plink_actions {
  * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
  * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
  * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
  * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
  * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
  */
@@ -5340,6 +5415,7 @@ enum nl80211_rekey_data {
 	NL80211_REKEY_DATA_KEK,
 	NL80211_REKEY_DATA_KCK,
 	NL80211_REKEY_DATA_REPLAY_CTR,
+	NL80211_REKEY_DATA_AKM,
 
 	/* keep last */
 	NUM_NL80211_REKEY_DATA,
@@ -5674,6 +5750,8 @@ enum nl80211_feature_flags {
  *
  * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
  *	and can receive key configuration for BIGTK using key indexes 6 and 7.
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
+ *	protection as a client only and cannot transmit protected beacons.
  *
  * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
  *	forwarding of preauth frames over the control port. They are then
@@ -5684,6 +5762,17 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
  *      in IBSS mode, essentially by dropping their state.
  *
+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
+ *	are possible for multicast frames and those will be reported properly.
+ *
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
+ *	reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
+ *	report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
+ *	included in the scan request.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
+ *	can report tx status for control port over nl80211 tx operations.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5735,6 +5824,10 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
 	NL80211_EXT_FEATURE_PROTECTED_TWT,
 	NL80211_EXT_FEATURE_DEL_IBSS_STA,
+	NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
+	NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
+	NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
+	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5846,6 +5939,9 @@ enum nl80211_timeout_reason {
  * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
  *	only have supported rates and no additional capabilities (unless
  *	added by userspace explicitly.)
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
+ *	%NL80211_ATTR_SCAN_FREQ_KHZ. This also means
+ *	%NL80211_ATTR_SCAN_FREQUENCIES will not be included.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -5861,6 +5957,7 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
 	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
 	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
+	NL80211_SCAN_FLAG_FREQ_KHZ				= 1<<13,
 };
 
 /**
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
index 9f06d29cab70..7576209d96f9 100644
--- a/include/uapi/linux/pkt_cls.h
+++ b/include/uapi/linux/pkt_cls.h
@@ -134,6 +134,7 @@ enum tca_id {
 	TCA_ID_CTINFO,
 	TCA_ID_MPLS,
 	TCA_ID_CT,
+	TCA_ID_GATE,
 	/* other actions go here */
 	__TCA_ID_MAX = 255
 };
@@ -575,6 +576,8 @@ enum {
 	TCA_FLOWER_KEY_CT_LABELS,	/* u128 */
 	TCA_FLOWER_KEY_CT_LABELS_MASK,	/* u128 */
 
+	TCA_FLOWER_KEY_MPLS_OPTS,
+
 	__TCA_FLOWER_MAX,
 };
 
@@ -640,6 +643,27 @@ enum {
 		(__TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX - 1)
 
 enum {
+	TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC,
+	TCA_FLOWER_KEY_MPLS_OPTS_LSE,
+	__TCA_FLOWER_KEY_MPLS_OPTS_MAX,
+};
+
+#define TCA_FLOWER_KEY_MPLS_OPTS_MAX (__TCA_FLOWER_KEY_MPLS_OPTS_MAX - 1)
+
+enum {
+	TCA_FLOWER_KEY_MPLS_OPT_LSE_UNSPEC,
+	TCA_FLOWER_KEY_MPLS_OPT_LSE_DEPTH,
+	TCA_FLOWER_KEY_MPLS_OPT_LSE_TTL,
+	TCA_FLOWER_KEY_MPLS_OPT_LSE_BOS,
+	TCA_FLOWER_KEY_MPLS_OPT_LSE_TC,
+	TCA_FLOWER_KEY_MPLS_OPT_LSE_LABEL,
+	__TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX,
+};
+
+#define TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX \
+		(__TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX - 1)
+
+enum {
 	TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0),
 	TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1),
 };
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
index 0c02737c8f47..a95f3ae7ab37 100644
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -913,6 +913,10 @@ enum {
 
 	TCA_FQ_TIMER_SLACK,	/* timer slack */
 
+	TCA_FQ_HORIZON,		/* time horizon in us */
+
+	TCA_FQ_HORIZON_DROP,	/* drop packets beyond horizon, or cap their EDT */
+
 	__TCA_FQ_MAX
 };
 
@@ -932,6 +936,8 @@ struct tc_fq_qd_stats {
 	__u32	throttled_flows;
 	__u32	unthrottle_latency_ns;
 	__u64	ce_mark;		/* packets above ce_threshold */
+	__u64	horizon_drops;
+	__u64	horizon_caps;
 };
 
 /* Heavy-Hitter Filter */
diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h
index ce1116cff53d..aea26ab1431c 100644
--- a/include/uapi/linux/psample.h
+++ b/include/uapi/linux/psample.h
@@ -11,6 +11,7 @@ enum {
 	PSAMPLE_ATTR_GROUP_SEQ,
 	PSAMPLE_ATTR_SAMPLE_RATE,
 	PSAMPLE_ATTR_DATA,
+	PSAMPLE_ATTR_TUNNEL,
 
 	/* commands attributes */
 	PSAMPLE_ATTR_GROUP_REFCOUNT,
@@ -25,6 +26,27 @@ enum psample_command {
 	PSAMPLE_CMD_DEL_GROUP,
 };
 
+enum psample_tunnel_key_attr {
+	PSAMPLE_TUNNEL_KEY_ATTR_ID,                 /* be64 Tunnel ID */
+	PSAMPLE_TUNNEL_KEY_ATTR_IPV4_SRC,           /* be32 src IP address. */
+	PSAMPLE_TUNNEL_KEY_ATTR_IPV4_DST,           /* be32 dst IP address. */
+	PSAMPLE_TUNNEL_KEY_ATTR_TOS,                /* u8 Tunnel IP ToS. */
+	PSAMPLE_TUNNEL_KEY_ATTR_TTL,                /* u8 Tunnel IP TTL. */
+	PSAMPLE_TUNNEL_KEY_ATTR_DONT_FRAGMENT,      /* No argument, set DF. */
+	PSAMPLE_TUNNEL_KEY_ATTR_CSUM,               /* No argument. CSUM packet. */
+	PSAMPLE_TUNNEL_KEY_ATTR_OAM,                /* No argument. OAM frame.  */
+	PSAMPLE_TUNNEL_KEY_ATTR_GENEVE_OPTS,        /* Array of Geneve options. */
+	PSAMPLE_TUNNEL_KEY_ATTR_TP_SRC,	            /* be16 src Transport Port. */
+	PSAMPLE_TUNNEL_KEY_ATTR_TP_DST,		    /* be16 dst Transport Port. */
+	PSAMPLE_TUNNEL_KEY_ATTR_VXLAN_OPTS,	    /* Nested VXLAN opts* */
+	PSAMPLE_TUNNEL_KEY_ATTR_IPV6_SRC,           /* struct in6_addr src IPv6 address. */
+	PSAMPLE_TUNNEL_KEY_ATTR_IPV6_DST,           /* struct in6_addr dst IPv6 address. */
+	PSAMPLE_TUNNEL_KEY_ATTR_PAD,
+	PSAMPLE_TUNNEL_KEY_ATTR_ERSPAN_OPTS,        /* struct erspan_metadata */
+	PSAMPLE_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE,   /* No argument. IPV4_INFO_BRIDGE mode.*/
+	__PSAMPLE_TUNNEL_KEY_ATTR_MAX
+};
+
 /* Can be overridden at runtime by module option */
 #define PSAMPLE_ATTR_MAX (__PSAMPLE_ATTR_MAX - 1)
 
diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
index 9dc9d0079e98..ff070aa64278 100644
--- a/include/uapi/linux/ptp_clock.h
+++ b/include/uapi/linux/ptp_clock.h
@@ -89,7 +89,9 @@ struct ptp_clock_caps {
 	int n_pins;    /* Number of input/output pins. */
 	/* Whether the clock supports precise system-device cross timestamps */
 	int cross_timestamping;
-	int rsv[13];   /* Reserved for future use. */
+	/* Whether the clock supports adjust phase */
+	int adjust_phase;
+	int rsv[12];   /* Reserved for future use. */
 };
 
 struct ptp_extts_request {
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
index 4a8c5b745157..073e71ef6bdd 100644
--- a/include/uapi/linux/rtnetlink.h
+++ b/include/uapi/linux/rtnetlink.h
@@ -609,11 +609,17 @@ enum {
 	TCA_HW_OFFLOAD,
 	TCA_INGRESS_BLOCK,
 	TCA_EGRESS_BLOCK,
+	TCA_DUMP_FLAGS,
 	__TCA_MAX
 };
 
 #define TCA_MAX (__TCA_MAX - 1)
 
+#define TCA_DUMP_FLAGS_TERSE (1 << 0) /* Means that in dump user gets only basic
+				       * data necessary to identify the objects
+				       * (handle, cookie, etc.) and stats.
+				       */
+
 #define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
 #define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
 
diff --git a/include/uapi/linux/tc_act/tc_gate.h b/include/uapi/linux/tc_act/tc_gate.h
new file mode 100644
index 000000000000..f214b3a6d44f
--- /dev/null
+++ b/include/uapi/linux/tc_act/tc_gate.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/* Copyright 2020 NXP */
+
+#ifndef __LINUX_TC_GATE_H
+#define __LINUX_TC_GATE_H
+
+#include <linux/pkt_cls.h>
+
+struct tc_gate {
+	tc_gen;
+};
+
+enum {
+	TCA_GATE_ENTRY_UNSPEC,
+	TCA_GATE_ENTRY_INDEX,
+	TCA_GATE_ENTRY_GATE,
+	TCA_GATE_ENTRY_INTERVAL,
+	TCA_GATE_ENTRY_IPV,
+	TCA_GATE_ENTRY_MAX_OCTETS,
+	__TCA_GATE_ENTRY_MAX,
+};
+#define TCA_GATE_ENTRY_MAX (__TCA_GATE_ENTRY_MAX - 1)
+
+enum {
+	TCA_GATE_ONE_ENTRY_UNSPEC,
+	TCA_GATE_ONE_ENTRY,
+	__TCA_GATE_ONE_ENTRY_MAX,
+};
+#define TCA_GATE_ONE_ENTRY_MAX (__TCA_GATE_ONE_ENTRY_MAX - 1)
+
+enum {
+	TCA_GATE_UNSPEC,
+	TCA_GATE_TM,
+	TCA_GATE_PARMS,
+	TCA_GATE_PAD,
+	TCA_GATE_PRIORITY,
+	TCA_GATE_ENTRY_LIST,
+	TCA_GATE_BASE_TIME,
+	TCA_GATE_CYCLE_TIME,
+	TCA_GATE_CYCLE_TIME_EXT,
+	TCA_GATE_FLAGS,
+	TCA_GATE_CLOCKID,
+	__TCA_GATE_MAX,
+};
+#define TCA_GATE_MAX (__TCA_GATE_MAX - 1)
+
+#endif
diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
index a2c006a364e0..24f3371ad826 100644
--- a/include/uapi/linux/wireless.h
+++ b/include/uapi/linux/wireless.h
@@ -74,7 +74,11 @@
 #include <linux/socket.h>		/* for "struct sockaddr" et al	*/
 #include <linux/if.h>			/* for IFNAMSIZ and co... */
 
-#include <stddef.h>                     /* for offsetof */
+#ifdef __KERNEL__
+#	include <linux/stddef.h>	/* for offsetof */
+#else
+#	include <stddef.h>		/* for offsetof */
+#endif
 
 /***************************** VERSION *****************************/
 /*