Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "Brazil's Independence Day pull request :-)

  This is one of the biggest media pull requests, with 625 patches
  affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).

  This contains:

   - A lot of new drivers:
     * DVB frontends: mxl5xx, stv0910, stv6111;
     * camera flash: as3645a led driver;
     * HDMI receiver: adv748X;
     * camera sensor: Omnivision 6650 5M driver (ov6650);
     * HDMI CEC: ao-cec meson driver;
     * V4L2: Qualcom camss driver;
     * Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.

   - The DDbridge DVB driver got a massive update, with makes it in sync
     with modern hardware from that vendor;

   - There's an important milestone on this series: the DVB
     documentation was written in 2003, but only started to be updated
     in 2007. It also used to contain several gaps from the time it was
     kept out of tree, mentioning error codes and device nodes that
     never existed upstream. On this series, it received a massive
     update: all non-deprecated digital TV APIs are now in sync with the
     current implementation;

   - Some DVB APIs that aren't used by any upstream driver got removed;

   - Other parts of the media documentation algo got updated, fixing
     some bugs on its PDF output and making it compatible with Sphinx
     version 1.6.

     As the number of hacks required to build PDF output reduced, I hope
     we'll have less troubles as newer versions of our documentation
     toolchain are released (famous last words);

   - As usual, lots of driver cleanups and improvements"

* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
  media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
  media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
  media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
  media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
  media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
  media: add qcom_camss.rst to v4l-drivers rst file
  media: dvb headers: make checkpatch happier
  media: dvb uapi: move frontend legacy API to another part of the book
  media: pixfmt-srggb12p.rst: better format the table for PDF output
  media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
  media: index.rst: don't write "Contents:" on PDF output
  media: pixfmt*.rst: replace a two dots by a comma
  media: vidioc-g-fmt.rst: adjust table format
  media: vivid.rst: add a blank line to correct ReST format
  media: v4l2 uapi book: get rid of driver programming's chapter
  media: format.rst: use the right markup for important notes
  media: docs-rst: cardlists: change their format to flat-tables
  media: em28xx-cardlist.rst: update to reflect last changes
  media: v4l2-event.rst: adjust table to fit on PDF output
  media: docs: don't show ToC for each part on PDF output
  ...

8 files changed, 775 insertions, 199 deletions

diff --git a/include/uapi/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h
index c451eec42a83..270b251a3d9b 100644
--- a/include/uapi/linux/cec-funcs.h
+++ b/include/uapi/linux/cec-funcs.h
@@ -895,6 +895,7 @@ static inline void cec_ops_report_features(const struct cec_msg *msg,
 	*cec_version = msg->msg[2];
 	*all_device_types = msg->msg[3];
 	*rc_profile = p;
+	*dev_features = NULL;
 	while (p < &msg->msg[14] && (*p & CEC_OP_FEAT_EXT))
 		p++;
 	if (!(*p & CEC_OP_FEAT_EXT)) {
diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h
index 44579a24f95d..4351c3481aea 100644
--- a/include/uapi/linux/cec.h
+++ b/include/uapi/linux/cec.h
@@ -318,6 +318,7 @@ static inline int cec_is_unconfigured(__u16 log_addr_mask)
 #define CEC_MODE_FOLLOWER		(0x1 << 4)
 #define CEC_MODE_EXCL_FOLLOWER		(0x2 << 4)
 #define CEC_MODE_EXCL_FOLLOWER_PASSTHRU	(0x3 << 4)
+#define CEC_MODE_MONITOR_PIN		(0xd << 4)
 #define CEC_MODE_MONITOR		(0xe << 4)
 #define CEC_MODE_MONITOR_ALL		(0xf << 4)
 #define CEC_MODE_FOLLOWER_MSK		0xf0
@@ -338,6 +339,8 @@ static inline int cec_is_unconfigured(__u16 log_addr_mask)
 #define CEC_CAP_MONITOR_ALL	(1 << 5)
 /* Hardware can use CEC only if the HDMI HPD pin is high. */
 #define CEC_CAP_NEEDS_HPD	(1 << 6)
+/* Hardware can monitor CEC pin transitions */
+#define CEC_CAP_MONITOR_PIN	(1 << 7)
 
 /**
  * struct cec_caps - CEC capabilities structure.
@@ -405,8 +408,11 @@ struct cec_log_addrs {
  * didn't empty the message queue in time
  */
 #define CEC_EVENT_LOST_MSGS		2
+#define CEC_EVENT_PIN_CEC_LOW		3
+#define CEC_EVENT_PIN_CEC_HIGH		4
 
 #define CEC_EVENT_FL_INITIAL_STATE	(1 << 0)
+#define CEC_EVENT_FL_DROPPED_EVENTS	(1 << 1)
 
 /**
  * struct cec_event_state_change - used when the CEC adapter changes state.
@@ -419,7 +425,7 @@ struct cec_event_state_change {
 };
 
 /**
- * struct cec_event_lost_msgs - tells you how many messages were lost due.
+ * struct cec_event_lost_msgs - tells you how many messages were lost.
  * @lost_msgs: how many messages were lost.
  */
 struct cec_event_lost_msgs {
diff --git a/include/uapi/linux/dvb/ca.h b/include/uapi/linux/dvb/ca.h
index c18537f3e449..cb150029fdff 100644
--- a/include/uapi/linux/dvb/ca.h
+++ b/include/uapi/linux/dvb/ca.h
@@ -24,67 +24,131 @@
 #ifndef _DVBCA_H_
 #define _DVBCA_H_
 
-/* slot interface types and info */
-
-typedef struct ca_slot_info {
-	int num;               /* slot number */
+/**
+ * struct ca_slot_info - CA slot interface types and info.
+ *
+ * @num:	slot number.
+ * @type:	slot type.
+ * @flags:	flags applicable to the slot.
+ *
+ * This struct stores the CA slot information.
+ *
+ * @type can be:
+ *
+ *	- %CA_CI - CI high level interface;
+ *	- %CA_CI_LINK - CI link layer level interface;
+ *	- %CA_CI_PHYS - CI physical layer level interface;
+ *	- %CA_DESCR - built-in descrambler;
+ *	- %CA_SC -simple smart card interface.
+ *
+ * @flags can be:
+ *
+ *	- %CA_CI_MODULE_PRESENT - module (or card) inserted;
+ *	- %CA_CI_MODULE_READY - module is ready for usage.
+ */
 
-	int type;              /* CA interface this slot supports */
-#define CA_CI            1     /* CI high level interface */
-#define CA_CI_LINK       2     /* CI link layer level interface */
-#define CA_CI_PHYS       4     /* CI physical layer level interface */
-#define CA_DESCR         8     /* built-in descrambler */
-#define CA_SC          128     /* simple smart card interface */
+struct ca_slot_info {
+	int num;
+	int type;
+#define CA_CI            1
+#define CA_CI_LINK       2
+#define CA_CI_PHYS       4
+#define CA_DESCR         8
+#define CA_SC          128
 
 	unsigned int flags;
-#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_PRESENT 1
 #define CA_CI_MODULE_READY   2
-} ca_slot_info_t;
-
+};
 
-/* descrambler types and info */
 
-typedef struct ca_descr_info {
-	unsigned int num;          /* number of available descramblers (keys) */
-	unsigned int type;         /* type of supported scrambling system */
+/**
+ * struct ca_descr_info - descrambler types and info.
+ *
+ * @num:	number of available descramblers (keys).
+ * @type:	type of supported scrambling system.
+ *
+ * Identifies the number of descramblers and their type.
+ *
+ * @type can be:
+ *
+ *	- %CA_ECD - European Common Descrambler (ECD) hardware;
+ *	- %CA_NDS - Videoguard (NDS) hardware;
+ *	- %CA_DSS - Distributed Sample Scrambling (DSS) hardware.
+ */
+struct ca_descr_info {
+	unsigned int num;
+	unsigned int type;
 #define CA_ECD           1
 #define CA_NDS           2
 #define CA_DSS           4
-} ca_descr_info_t;
+};
 
-typedef struct ca_caps {
-	unsigned int slot_num;     /* total number of CA card and module slots */
-	unsigned int slot_type;    /* OR of all supported types */
-	unsigned int descr_num;    /* total number of descrambler slots (keys) */
-	unsigned int descr_type;   /* OR of all supported types */
-} ca_caps_t;
+/**
+ * struct ca_caps - CA slot interface capabilities.
+ *
+ * @slot_num:	total number of CA card and module slots.
+ * @slot_type:	bitmap with all supported types as defined at
+ *		&struct ca_slot_info (e. g. %CA_CI, %CA_CI_LINK, etc).
+ * @descr_num:	total number of descrambler slots (keys)
+ * @descr_type:	bitmap with all supported types as defined at
+ *		&struct ca_descr_info (e. g. %CA_ECD, %CA_NDS, etc).
+ */
+struct ca_caps {
+	unsigned int slot_num;
+	unsigned int slot_type;
+	unsigned int descr_num;
+	unsigned int descr_type;
+};
 
-/* a message to/from a CI-CAM */
-typedef struct ca_msg {
+/**
+ * struct ca_msg - a message to/from a CI-CAM
+ *
+ * @index:	unused
+ * @type:	unused
+ * @length:	length of the message
+ * @msg:	message
+ *
+ * This struct carries a message to be send/received from a CI CA module.
+ */
+struct ca_msg {
 	unsigned int index;
 	unsigned int type;
 	unsigned int length;
 	unsigned char msg[256];
-} ca_msg_t;
+};
 
-typedef struct ca_descr {
+/**
+ * struct ca_descr - CA descrambler control words info
+ *
+ * @index: CA Descrambler slot
+ * @parity: control words parity, where 0 means even and 1 means odd
+ * @cw: CA Descrambler control words
+ */
+struct ca_descr {
 	unsigned int index;
-	unsigned int parity;	/* 0 == even, 1 == odd */
+	unsigned int parity;
 	unsigned char cw[8];
-} ca_descr_t;
-
-typedef struct ca_pid {
-	unsigned int pid;
-	int index;		/* -1 == disable*/
-} ca_pid_t;
+};
 
 #define CA_RESET          _IO('o', 128)
-#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
-#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
-#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
-#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
-#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
-#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
-#define CA_SET_PID        _IOW('o', 135, ca_pid_t)
+#define CA_GET_CAP        _IOR('o', 129, struct ca_caps)
+#define CA_GET_SLOT_INFO  _IOR('o', 130, struct ca_slot_info)
+#define CA_GET_DESCR_INFO _IOR('o', 131, struct ca_descr_info)
+#define CA_GET_MSG        _IOR('o', 132, struct ca_msg)
+#define CA_SEND_MSG       _IOW('o', 133, struct ca_msg)
+#define CA_SET_DESCR      _IOW('o', 134, struct ca_descr)
+
+#if !defined(__KERNEL__)
+
+/* This is needed for legacy userspace support */
+typedef struct ca_slot_info ca_slot_info_t;
+typedef struct ca_descr_info  ca_descr_info_t;
+typedef struct ca_caps  ca_caps_t;
+typedef struct ca_msg ca_msg_t;
+typedef struct ca_descr ca_descr_t;
+
+#endif
+
 
 #endif
diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h
index 427e4899ed69..4aa5f6a1815a 100644
--- a/include/uapi/linux/dvb/dmx.h
+++ b/include/uapi/linux/dvb/dmx.h
@@ -32,28 +32,74 @@
 
 #define DMX_FILTER_SIZE 16
 
-enum dmx_output
-{
-	DMX_OUT_DECODER, /* Streaming directly to decoder. */
-	DMX_OUT_TAP,     /* Output going to a memory buffer */
-			 /* (to be retrieved via the read command).*/
-	DMX_OUT_TS_TAP,  /* Output multiplexed into a new TS  */
-			 /* (to be retrieved by reading from the */
-			 /* logical DVR device).                 */
-	DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */
+/**
+ * enum dmx_output - Output for the demux.
+ *
+ * @DMX_OUT_DECODER:
+ *	Streaming directly to decoder.
+ * @DMX_OUT_TAP:
+ *	Output going to a memory buffer (to be retrieved via the read command).
+ *	Delivers the stream output to the demux device on which the ioctl
+ *	is called.
+ * @DMX_OUT_TS_TAP:
+ *	Output multiplexed into a new TS (to be retrieved by reading from the
+ *	logical DVR device). Routes output to the logical DVR device
+ *	``/dev/dvb/adapter?/dvr?``, which delivers a TS multiplexed from all
+ *	filters for which @DMX_OUT_TS_TAP was specified.
+ * @DMX_OUT_TSDEMUX_TAP:
+ *	Like @DMX_OUT_TS_TAP but retrieved from the DMX device.
+ */
+enum dmx_output {
+	DMX_OUT_DECODER,
+	DMX_OUT_TAP,
+	DMX_OUT_TS_TAP,
+	DMX_OUT_TSDEMUX_TAP
 };
 
-typedef enum dmx_output dmx_output_t;
 
-typedef enum dmx_input
-{
-	DMX_IN_FRONTEND, /* Input from a front-end device.  */
-	DMX_IN_DVR       /* Input from the logical DVR device.  */
-} dmx_input_t;
+/**
+ * enum dmx_input - Input from the demux.
+ *
+ * @DMX_IN_FRONTEND:	Input from a front-end device.
+ * @DMX_IN_DVR:		Input from the logical DVR device.
+ */
+enum dmx_input {
+	DMX_IN_FRONTEND,
+	DMX_IN_DVR
+};
 
+/**
+ * enum dmx_ts_pes - type of the PES filter.
+ *
+ * @DMX_PES_AUDIO0:	first audio PID. Also referred as @DMX_PES_AUDIO.
+ * @DMX_PES_VIDEO0:	first video PID. Also referred as @DMX_PES_VIDEO.
+ * @DMX_PES_TELETEXT0:	first teletext PID. Also referred as @DMX_PES_TELETEXT.
+ * @DMX_PES_SUBTITLE0:	first subtitle PID. Also referred as @DMX_PES_SUBTITLE.
+ * @DMX_PES_PCR0:	first Program Clock Reference PID.
+ *			Also referred as @DMX_PES_PCR.
+ *
+ * @DMX_PES_AUDIO1:	second audio PID.
+ * @DMX_PES_VIDEO1:	second video PID.
+ * @DMX_PES_TELETEXT1:	second teletext PID.
+ * @DMX_PES_SUBTITLE1:	second subtitle PID.
+ * @DMX_PES_PCR1:	second Program Clock Reference PID.
+ *
+ * @DMX_PES_AUDIO2:	third audio PID.
+ * @DMX_PES_VIDEO2:	third video PID.
+ * @DMX_PES_TELETEXT2:	third teletext PID.
+ * @DMX_PES_SUBTITLE2:	third subtitle PID.
+ * @DMX_PES_PCR2:	third Program Clock Reference PID.
+ *
+ * @DMX_PES_AUDIO3:	fourth audio PID.
+ * @DMX_PES_VIDEO3:	fourth video PID.
+ * @DMX_PES_TELETEXT3:	fourth teletext PID.
+ * @DMX_PES_SUBTITLE3:	fourth subtitle PID.
+ * @DMX_PES_PCR3:	fourth Program Clock Reference PID.
+ *
+ * @DMX_PES_OTHER:	any other PID.
+ */
 
-typedef enum dmx_ts_pes
-{
+enum dmx_ts_pes {
 	DMX_PES_AUDIO0,
 	DMX_PES_VIDEO0,
 	DMX_PES_TELETEXT0,
@@ -79,7 +125,7 @@ typedef enum dmx_ts_pes
 	DMX_PES_PCR3,
 
 	DMX_PES_OTHER
-} dmx_pes_type_t;
+};
 
 #define DMX_PES_AUDIO    DMX_PES_AUDIO0
 #define DMX_PES_VIDEO    DMX_PES_VIDEO0
@@ -88,56 +134,80 @@ typedef enum dmx_ts_pes
 #define DMX_PES_PCR      DMX_PES_PCR0
 
 
-typedef struct dmx_filter
-{
+
+/**
+ * struct dmx_filter - Specifies a section header filter.
+ *
+ * @filter: bit array with bits to be matched at the section header.
+ * @mask: bits that are valid at the filter bit array.
+ * @mode: mode of match: if bit is zero, it will match if equal (positive
+ *	  match); if bit is one, it will match if the bit is negated.
+ *
+ * Note: All arrays in this struct have a size of DMX_FILTER_SIZE (16 bytes).
+ */
+struct dmx_filter {
 	__u8  filter[DMX_FILTER_SIZE];
 	__u8  mask[DMX_FILTER_SIZE];
 	__u8  mode[DMX_FILTER_SIZE];
-} dmx_filter_t;
-
+};
 
-struct dmx_sct_filter_params
-{
-	__u16          pid;
-	dmx_filter_t   filter;
-	__u32          timeout;
-	__u32          flags;
+/**
+ * struct dmx_sct_filter_params - Specifies a section filter.
+ *
+ * @pid: PID to be filtered.
+ * @filter: section header filter, as defined by &struct dmx_filter.
+ * @timeout: maximum time to filter, in milliseconds.
+ * @flags: extra flags for the section filter.
+ *
+ * Carries the configuration for a MPEG-TS section filter.
+ *
+ * The @flags can be:
+ *
+ *	- %DMX_CHECK_CRC - only deliver sections where the CRC check succeeded;
+ *	- %DMX_ONESHOT - disable the section filter after one section
+ *	  has been delivered;
+ *	- %DMX_IMMEDIATE_START - Start filter immediately without requiring a
+ *	  :ref:`DMX_START`.
+ */
+struct dmx_sct_filter_params {
+	__u16             pid;
+	struct dmx_filter filter;
+	__u32             timeout;
+	__u32             flags;
 #define DMX_CHECK_CRC       1
 #define DMX_ONESHOT         2
 #define DMX_IMMEDIATE_START 4
-#define DMX_KERNEL_CLIENT   0x8000
 };
 
-
-struct dmx_pes_filter_params
-{
-	__u16          pid;
-	dmx_input_t    input;
-	dmx_output_t   output;
-	dmx_pes_type_t pes_type;
-	__u32          flags;
+/**
+ * struct dmx_pes_filter_params - Specifies Packetized Elementary Stream (PES)
+ *	filter parameters.
+ *
+ * @pid:	PID to be filtered.
+ * @input:	Demux input, as specified by &enum dmx_input.
+ * @output:	Demux output, as specified by &enum dmx_output.
+ * @pes_type:	Type of the pes filter, as specified by &enum dmx_pes_type.
+ * @flags:	Demux PES flags.
+ */
+struct dmx_pes_filter_params {
+	__u16           pid;
+	enum dmx_input  input;
+	enum dmx_output output;
+	enum dmx_ts_pes pes_type;
+	__u32           flags;
 };
 
-typedef struct dmx_caps {
-	__u32 caps;
-	int num_decoders;
-} dmx_caps_t;
-
-typedef enum dmx_source {
-	DMX_SOURCE_FRONT0 = 0,
-	DMX_SOURCE_FRONT1,
-	DMX_SOURCE_FRONT2,
-	DMX_SOURCE_FRONT3,
-	DMX_SOURCE_DVR0   = 16,
-	DMX_SOURCE_DVR1,
-	DMX_SOURCE_DVR2,
-	DMX_SOURCE_DVR3
-} dmx_source_t;
-
+/**
+ * struct dmx_stc - Stores System Time Counter (STC) information.
+ *
+ * @num: input data: number of the STC, from 0 to N.
+ * @base: output: divisor for STC to get 90 kHz clock.
+ * @stc: output: stc in @base * 90 kHz units.
+ */
 struct dmx_stc {
-	unsigned int num;	/* input : which STC? 0..N */
-	unsigned int base;	/* output: divisor for stc to get 90 kHz clock */
-	__u64 stc;		/* output: stc in 'base'*90 kHz units */
+	unsigned int num;
+	unsigned int base;
+	__u64 stc;
 };
 
 #define DMX_START                _IO('o', 41)
@@ -146,10 +216,18 @@ struct dmx_stc {
 #define DMX_SET_PES_FILTER       _IOW('o', 44, struct dmx_pes_filter_params)
 #define DMX_SET_BUFFER_SIZE      _IO('o', 45)
 #define DMX_GET_PES_PIDS         _IOR('o', 47, __u16[5])
-#define DMX_GET_CAPS             _IOR('o', 48, dmx_caps_t)
-#define DMX_SET_SOURCE           _IOW('o', 49, dmx_source_t)
 #define DMX_GET_STC              _IOWR('o', 50, struct dmx_stc)
 #define DMX_ADD_PID              _IOW('o', 51, __u16)
 #define DMX_REMOVE_PID           _IOW('o', 52, __u16)
 
+#if !defined(__KERNEL__)
+
+/* This is needed for legacy userspace support */
+typedef enum dmx_output dmx_output_t;
+typedef enum dmx_input dmx_input_t;
+typedef enum dmx_ts_pes dmx_pes_type_t;
+typedef struct dmx_filter dmx_filter_t;
+
+#endif
+
 #endif /* _UAPI_DVBDMX_H_ */
diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h
index 00a20cd21ee2..861cacd5711f 100644
--- a/include/uapi/linux/dvb/frontend.h
+++ b/include/uapi/linux/dvb/frontend.h
@@ -28,13 +28,46 @@
 
 #include <linux/types.h>
 
-enum fe_type {
-	FE_QPSK,
-	FE_QAM,
-	FE_OFDM,
-	FE_ATSC
-};
-
+/**
+ * enum fe_caps - Frontend capabilities
+ *
+ * @FE_IS_STUPID:			There's something wrong at the
+ *					frontend, and it can't report its
+ *					capabilities.
+ * @FE_CAN_INVERSION_AUTO:		Can auto-detect frequency spectral
+ *					band inversion
+ * @FE_CAN_FEC_1_2:			Supports FEC 1/2
+ * @FE_CAN_FEC_2_3:			Supports FEC 2/3
+ * @FE_CAN_FEC_3_4:			Supports FEC 3/4
+ * @FE_CAN_FEC_4_5:			Supports FEC 4/5
+ * @FE_CAN_FEC_5_6:			Supports FEC 5/6
+ * @FE_CAN_FEC_6_7:			Supports FEC 6/7
+ * @FE_CAN_FEC_7_8:			Supports FEC 7/8
+ * @FE_CAN_FEC_8_9:			Supports FEC 8/9
+ * @FE_CAN_FEC_AUTO:			Can auto-detect FEC
+ * @FE_CAN_QPSK:			Supports QPSK modulation
+ * @FE_CAN_QAM_16:			Supports 16-QAM modulation
+ * @FE_CAN_QAM_32:			Supports 32-QAM modulation
+ * @FE_CAN_QAM_64:			Supports 64-QAM modulation
+ * @FE_CAN_QAM_128:			Supports 128-QAM modulation
+ * @FE_CAN_QAM_256:			Supports 256-QAM modulation
+ * @FE_CAN_QAM_AUTO:			Can auto-detect QAM modulation
+ * @FE_CAN_TRANSMISSION_MODE_AUTO:	Can auto-detect transmission mode
+ * @FE_CAN_BANDWIDTH_AUTO:		Can auto-detect bandwidth
+ * @FE_CAN_GUARD_INTERVAL_AUTO:		Can auto-detect guard interval
+ * @FE_CAN_HIERARCHY_AUTO:		Can auto-detect hierarchy
+ * @FE_CAN_8VSB:			Supports 8-VSB modulation
+ * @FE_CAN_16VSB:			Supporta 16-VSB modulation
+ * @FE_HAS_EXTENDED_CAPS:		Unused
+ * @FE_CAN_MULTISTREAM:			Supports multistream filtering
+ * @FE_CAN_TURBO_FEC:			Supports "turbo FEC" modulation
+ * @FE_CAN_2G_MODULATION:		Supports "2nd generation" modulation,
+ *					e. g. DVB-S2, DVB-T2, DVB-C2
+ * @FE_NEEDS_BENDING:			Unused
+ * @FE_CAN_RECOVER:			Can recover from a cable unplug
+ *					automatically
+ * @FE_CAN_MUTE_TS:			Can stop spurious TS data output
+ */
 enum fe_caps {
 	FE_IS_STUPID			= 0,
 	FE_CAN_INVERSION_AUTO		= 0x1,
@@ -60,15 +93,55 @@ enum fe_caps {
 	FE_CAN_HIERARCHY_AUTO		= 0x100000,
 	FE_CAN_8VSB			= 0x200000,
 	FE_CAN_16VSB			= 0x400000,
-	FE_HAS_EXTENDED_CAPS		= 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
-	FE_CAN_MULTISTREAM		= 0x4000000,  /* frontend supports multistream filtering */
-	FE_CAN_TURBO_FEC		= 0x8000000,  /* frontend supports "turbo fec modulation" */
-	FE_CAN_2G_MODULATION		= 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
-	FE_NEEDS_BENDING		= 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
-	FE_CAN_RECOVER			= 0x40000000, /* frontend can recover from a cable unplug automatically */
-	FE_CAN_MUTE_TS			= 0x80000000  /* frontend can stop spurious TS data output */
+	FE_HAS_EXTENDED_CAPS		= 0x800000,
+	FE_CAN_MULTISTREAM		= 0x4000000,
+	FE_CAN_TURBO_FEC		= 0x8000000,
+	FE_CAN_2G_MODULATION		= 0x10000000,
+	FE_NEEDS_BENDING		= 0x20000000,
+	FE_CAN_RECOVER			= 0x40000000,
+	FE_CAN_MUTE_TS			= 0x80000000
+};
+
+/*
+ * DEPRECATED: Should be kept just due to backward compatibility.
+ */
+enum fe_type {
+	FE_QPSK,
+	FE_QAM,
+	FE_OFDM,
+	FE_ATSC
 };
 
+/**
+ * struct dvb_frontend_info - Frontend properties and capabilities
+ *
+ * @name:			Name of the frontend
+ * @type:			**DEPRECATED**.
+ *				Should not be used on modern programs,
+ *				as a frontend may have more than one type.
+ *				In order to get the support types of a given
+ *				frontend, use :c:type:`DTV_ENUM_DELSYS`
+ *				instead.
+ * @frequency_min:		Minimal frequency supported by the frontend.
+ * @frequency_max:		Minimal frequency supported by the frontend.
+ * @frequency_stepsize:		All frequencies are multiple of this value.
+ * @frequency_tolerance:	Frequency tolerance.
+ * @symbol_rate_min:		Minimal symbol rate, in bauds
+ *				(for Cable/Satellite systems).
+ * @symbol_rate_max:		Maximal symbol rate, in bauds
+ *				(for Cable/Satellite systems).
+ * @symbol_rate_tolerance:	Maximal symbol rate tolerance, in ppm
+ *				(for Cable/Satellite systems).
+ * @notifier_delay:		**DEPRECATED**. Not used by any driver.
+ * @caps:			Capabilities supported by the frontend,
+ *				as specified in &enum fe_caps.
+ *
+ * .. note:
+ *
+ *    #. The frequencies are specified in Hz for Terrestrial and Cable
+ *       systems.
+ *    #. The frequencies are specified in kHz for Satellite systems.
+ */
 struct dvb_frontend_info {
 	char       name[128];
 	enum fe_type type;	/* DEPRECATED. Use DTV_ENUM_DELSYS instead */
@@ -78,55 +151,105 @@ struct dvb_frontend_info {
 	__u32      frequency_tolerance;
 	__u32      symbol_rate_min;
 	__u32      symbol_rate_max;
-	__u32      symbol_rate_tolerance;	/* ppm */
+	__u32      symbol_rate_tolerance;
 	__u32      notifier_delay;		/* DEPRECATED */
 	enum fe_caps caps;
 };
 
-
 /**
- *  Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
- *  the meaning of this struct...
+ * struct dvb_diseqc_master_cmd - DiSEqC master command
+ *
+ * @msg:
+ *	DiSEqC message to be sent. It contains a 3 bytes header with:
+ *	framing + address + command, and an optional argument
+ *	of up to 3 bytes of data.
+ * @msg_len:
+ *	Length of the DiSEqC message. Valid values are 3 to 6.
+ *
+ * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ * the possible messages that can be used.
  */
 struct dvb_diseqc_master_cmd {
-	__u8 msg [6];	/*  { framing, address, command, data [3] } */
-	__u8 msg_len;	/*  valid values are 3...6  */
+	__u8 msg[6];
+	__u8 msg_len;
 };
 
+/**
+ * struct dvb_diseqc_slave_reply - DiSEqC received data
+ *
+ * @msg:
+ *	DiSEqC message buffer to store a message received via DiSEqC.
+ *	It contains one byte header with: framing and
+ *	an optional argument of up to 3 bytes of data.
+ * @msg_len:
+ *	Length of the DiSEqC message. Valid values are 0 to 4,
+ *	where 0 means no message.
+ * @timeout:
+ *	Return from ioctl after timeout ms with errorcode when
+ *	no message was received.
+ *
+ * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ * the possible messages that can be used.
+ */
 struct dvb_diseqc_slave_reply {
-	__u8 msg [4];	/*  { framing, data [3] } */
-	__u8 msg_len;	/*  valid values are 0...4, 0 means no msg  */
-	int  timeout;	/*  return from ioctl after timeout ms with */
-};			/*  errorcode when no message was received  */
+	__u8 msg[4];
+	__u8 msg_len;
+	int  timeout;
+};
 
+/**
+ * enum fe_sec_voltage - DC Voltage used to feed the LNBf
+ *
+ * @SEC_VOLTAGE_13:	Output 13V to the LNBf
+ * @SEC_VOLTAGE_18:	Output 18V to the LNBf
+ * @SEC_VOLTAGE_OFF:	Don't feed the LNBf with a DC voltage
+ */
 enum fe_sec_voltage {
 	SEC_VOLTAGE_13,
 	SEC_VOLTAGE_18,
 	SEC_VOLTAGE_OFF
 };
 
+/**
+ * enum fe_sec_tone_mode - Type of tone to be send to the LNBf.
+ * @SEC_TONE_ON:	Sends a 22kHz tone burst to the antenna.
+ * @SEC_TONE_OFF:	Don't send a 22kHz tone to the antenna (except
+ *			if the ``FE_DISEQC_*`` ioctls are called).
+ */
 enum fe_sec_tone_mode {
 	SEC_TONE_ON,
 	SEC_TONE_OFF
 };
 
+/**
+ * enum fe_sec_mini_cmd - Type of mini burst to be sent
+ *
+ * @SEC_MINI_A:		Sends a mini-DiSEqC 22kHz '0' Tone Burst to select
+ *			satellite-A
+ * @SEC_MINI_B:		Sends a mini-DiSEqC 22kHz '1' Data Burst to select
+ *			satellite-B
+ */
 enum fe_sec_mini_cmd {
 	SEC_MINI_A,
 	SEC_MINI_B
 };
 
 /**
- * enum fe_status - enumerates the possible frontend status
- * @FE_HAS_SIGNAL:	found something above the noise level
- * @FE_HAS_CARRIER:	found a DVB signal
- * @FE_HAS_VITERBI:	FEC is stable
- * @FE_HAS_SYNC:	found sync bytes
- * @FE_HAS_LOCK:	everything's working
- * @FE_TIMEDOUT:	no lock within the last ~2 seconds
- * @FE_REINIT:		frontend was reinitialized, application is recommended
- *			to reset DiSEqC, tone and parameters
+ * enum fe_status - Enumerates the possible frontend status.
+ * @FE_NONE:		The frontend doesn't have any kind of lock.
+ *			That's the initial frontend status
+ * @FE_HAS_SIGNAL:	Has found something above the noise level.
+ * @FE_HAS_CARRIER:	Has found a signal.
+ * @FE_HAS_VITERBI:	FEC inner coding (Viterbi, LDPC or other inner code).
+ *			is stable.
+ * @FE_HAS_SYNC:	Synchronization bytes was found.
+ * @FE_HAS_LOCK:	Digital TV were locked and everything is working.
+ * @FE_TIMEDOUT:	Fo lock within the last about 2 seconds.
+ * @FE_REINIT:		Frontend was reinitialized, application is recommended
+ *			to reset DiSEqC, tone and parameters.
  */
 enum fe_status {
+	FE_NONE			= 0x00,
 	FE_HAS_SIGNAL		= 0x01,
 	FE_HAS_CARRIER		= 0x02,
 	FE_HAS_VITERBI		= 0x04,
@@ -136,12 +259,45 @@ enum fe_status {
 	FE_REINIT		= 0x40,
 };
 
+/**
+ * enum fe_spectral_inversion - Type of inversion band
+ *
+ * @INVERSION_OFF:	Don't do spectral band inversion.
+ * @INVERSION_ON:	Do spectral band inversion.
+ * @INVERSION_AUTO:	Autodetect spectral band inversion.
+ *
+ * This parameter indicates if spectral inversion should be presumed or
+ * not. In the automatic setting (``INVERSION_AUTO``) the hardware will try
+ * to figure out the correct setting by itself. If the hardware doesn't
+ * support, the %dvb_frontend will try to lock at the carrier first with
+ * inversion off. If it fails, it will try to enable inversion.
+ */
 enum fe_spectral_inversion {
 	INVERSION_OFF,
 	INVERSION_ON,
 	INVERSION_AUTO
 };
 
+/**
+ * enum fe_code_rate - Type of Forward Error Correction (FEC)
+ *
+ *
+ * @FEC_NONE: No Forward Error Correction Code
+ * @FEC_1_2:  Forward Error Correction Code 1/2
+ * @FEC_2_3:  Forward Error Correction Code 2/3
+ * @FEC_3_4:  Forward Error Correction Code 3/4
+ * @FEC_4_5:  Forward Error Correction Code 4/5
+ * @FEC_5_6:  Forward Error Correction Code 5/6
+ * @FEC_6_7:  Forward Error Correction Code 6/7
+ * @FEC_7_8:  Forward Error Correction Code 7/8
+ * @FEC_8_9:  Forward Error Correction Code 8/9
+ * @FEC_AUTO: Autodetect Error Correction Code
+ * @FEC_3_5:  Forward Error Correction Code 3/5
+ * @FEC_9_10: Forward Error Correction Code 9/10
+ * @FEC_2_5:  Forward Error Correction Code 2/5
+ *
+ * Please note that not all FEC types are supported by a given standard.
+ */
 enum fe_code_rate {
 	FEC_NONE = 0,
 	FEC_1_2,
@@ -158,6 +314,26 @@ enum fe_code_rate {
 	FEC_2_5,
 };
 
+/**
+ * enum fe_modulation - Type of modulation/constellation
+ * @QPSK:	QPSK modulation
+ * @QAM_16:	16-QAM modulation
+ * @QAM_32:	32-QAM modulation
+ * @QAM_64:	64-QAM modulation
+ * @QAM_128:	128-QAM modulation
+ * @QAM_256:	256-QAM modulation
+ * @QAM_AUTO:	Autodetect QAM modulation
+ * @VSB_8:	8-VSB modulation
+ * @VSB_16:	16-VSB modulation
+ * @PSK_8:	8-PSK modulation
+ * @APSK_16:	16-APSK modulation
+ * @APSK_32:	32-APSK modulation
+ * @DQPSK:	DQPSK modulation
+ * @QAM_4_NR:	4-QAM-NR modulation
+ *
+ * Please note that not all modulations are supported by a given standard.
+ *
+ */
 enum fe_modulation {
 	QPSK,
 	QAM_16,
@@ -175,6 +351,32 @@ enum fe_modulation {
 	QAM_4_NR,
 };
 
+/**
+ * enum fe_transmit_mode - Transmission mode
+ *
+ * @TRANSMISSION_MODE_AUTO:
+ *	Autodetect transmission mode. The hardware will try to find the
+ *	correct FFT-size (if capable) to fill in the missing parameters.
+ * @TRANSMISSION_MODE_1K:
+ *	Transmission mode 1K
+ * @TRANSMISSION_MODE_2K:
+ *	Transmission mode 2K
+ * @TRANSMISSION_MODE_8K:
+ *	Transmission mode 8K
+ * @TRANSMISSION_MODE_4K:
+ *	Transmission mode 4K
+ * @TRANSMISSION_MODE_16K:
+ *	Transmission mode 16K
+ * @TRANSMISSION_MODE_32K:
+ *	Transmission mode 32K
+ * @TRANSMISSION_MODE_C1:
+ *	Single Carrier (C=1) transmission mode (DTMB only)
+ * @TRANSMISSION_MODE_C3780:
+ *	Multi Carrier (C=3780) transmission mode (DTMB only)
+ *
+ * Please note that not all transmission modes are supported by a given
+ * standard.
+ */
 enum fe_transmit_mode {
 	TRANSMISSION_MODE_2K,
 	TRANSMISSION_MODE_8K,
@@ -187,6 +389,23 @@ enum fe_transmit_mode {
 	TRANSMISSION_MODE_C3780,
 };
 
+/**
+ * enum fe_guard_interval - Guard interval
+ *
+ * @GUARD_INTERVAL_AUTO:	Autodetect the guard interval
+ * @GUARD_INTERVAL_1_128:	Guard interval 1/128
+ * @GUARD_INTERVAL_1_32:	Guard interval 1/32
+ * @GUARD_INTERVAL_1_16:	Guard interval 1/16
+ * @GUARD_INTERVAL_1_8:		Guard interval 1/8
+ * @GUARD_INTERVAL_1_4:		Guard interval 1/4
+ * @GUARD_INTERVAL_19_128:	Guard interval 19/128
+ * @GUARD_INTERVAL_19_256:	Guard interval 19/256
+ * @GUARD_INTERVAL_PN420:	PN length 420 (1/4)
+ * @GUARD_INTERVAL_PN595:	PN length 595 (1/6)
+ * @GUARD_INTERVAL_PN945:	PN length 945 (1/9)
+ *
+ * Please note that not all guard intervals are supported by a given standard.
+ */
 enum fe_guard_interval {
 	GUARD_INTERVAL_1_32,
 	GUARD_INTERVAL_1_16,
@@ -201,6 +420,16 @@ enum fe_guard_interval {
 	GUARD_INTERVAL_PN945,
 };
 
+/**
+ * enum fe_hierarchy - Hierarchy
+ * @HIERARCHY_NONE:	No hierarchy
+ * @HIERARCHY_AUTO:	Autodetect hierarchy (if supported)
+ * @HIERARCHY_1:	Hierarchy 1
+ * @HIERARCHY_2:	Hierarchy 2
+ * @HIERARCHY_4:	Hierarchy 4
+ *
+ * Please note that not all hierarchy types are supported by a given standard.
+ */
 enum fe_hierarchy {
 	HIERARCHY_NONE,
 	HIERARCHY_1,
@@ -209,6 +438,15 @@ enum fe_hierarchy {
 	HIERARCHY_AUTO
 };
 
+/**
+ * enum fe_interleaving - Interleaving
+ * @INTERLEAVING_NONE:	No interleaving.
+ * @INTERLEAVING_AUTO:	Auto-detect interleaving.
+ * @INTERLEAVING_240:	Interleaving of 240 symbols.
+ * @INTERLEAVING_720:	Interleaving of 720 symbols.
+ *
+ * Please note that, currently, only DTMB uses it.
+ */
 enum fe_interleaving {
 	INTERLEAVING_NONE,
 	INTERLEAVING_AUTO,
@@ -216,7 +454,8 @@ enum fe_interleaving {
 	INTERLEAVING_720,
 };
 
-/* S2API Commands */
+/* DVBv5 property Commands */
+
 #define DTV_UNDEFINED		0
 #define DTV_TUNE		1
 #define DTV_CLEAR		2
@@ -309,19 +548,79 @@ enum fe_interleaving {
 
 #define DTV_MAX_COMMAND		DTV_STAT_TOTAL_BLOCK_COUNT
 
+/**
+ * enum fe_pilot - Type of pilot tone
+ *
+ * @PILOT_ON:	Pilot tones enabled
+ * @PILOT_OFF:	Pilot tones disabled
+ * @PILOT_AUTO:	Autodetect pilot tones
+ */
 enum fe_pilot {
 	PILOT_ON,
 	PILOT_OFF,
 	PILOT_AUTO,
 };
 
+/**
+ * enum fe_rolloff - Rolloff factor
+ * @ROLLOFF_35:		Roloff factor: α=35%
+ * @ROLLOFF_20:		Roloff factor: α=20%
+ * @ROLLOFF_25:		Roloff factor: α=25%
+ * @ROLLOFF_AUTO:	Auto-detect the roloff factor.
+ *
+ * .. note:
+ *
+ *    Roloff factor of 35% is implied on DVB-S. On DVB-S2, it is default.
+ */
 enum fe_rolloff {
-	ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+	ROLLOFF_35,
 	ROLLOFF_20,
 	ROLLOFF_25,
 	ROLLOFF_AUTO,
 };
 
+/**
+ * enum fe_delivery_system - Type of the delivery system
+ *
+ * @SYS_UNDEFINED:
+ *	Undefined standard. Generally, indicates an error
+ * @SYS_DVBC_ANNEX_A:
+ *	Cable TV: DVB-C following ITU-T J.83 Annex A spec
+ * @SYS_DVBC_ANNEX_B:
+ *	Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM)
+ * @SYS_DVBC_ANNEX_C:
+ *	Cable TV: DVB-C following ITU-T J.83 Annex C spec
+ * @SYS_ISDBC:
+ *	Cable TV: ISDB-C (no drivers yet)
+ * @SYS_DVBT:
+ *	Terrestrial TV: DVB-T
+ * @SYS_DVBT2:
+ *	Terrestrial TV: DVB-T2
+ * @SYS_ISDBT:
+ *	Terrestrial TV: ISDB-T
+ * @SYS_ATSC:
+ *	Terrestrial TV: ATSC
+ * @SYS_ATSCMH:
+ *	Terrestrial TV (mobile): ATSC-M/H
+ * @SYS_DTMB:
+ *	Terrestrial TV: DTMB
+ * @SYS_DVBS:
+ *	Satellite TV: DVB-S
+ * @SYS_DVBS2:
+ *	Satellite TV: DVB-S2
+ * @SYS_TURBO:
+ *	Satellite TV: DVB-S Turbo
+ * @SYS_ISDBS:
+ *	Satellite TV: ISDB-S
+ * @SYS_DAB:
+ *	Digital audio: DAB (not fully supported)
+ * @SYS_DSS:
+ *	Satellite TV: DSS (not fully supported)
+ * @SYS_CMMB:
+ *	Terrestrial TV (mobile): CMMB (not fully supported)
+ * @SYS_DVBH:
+ *	Terrestrial TV (mobile): DVB-H (standard deprecated)
+ */
 enum fe_delivery_system {
 	SYS_UNDEFINED,
 	SYS_DVBC_ANNEX_A,
@@ -344,35 +643,85 @@ enum fe_delivery_system {
 	SYS_DVBC_ANNEX_C,
 };
 
-/* backward compatibility */
+/* backward compatibility definitions for delivery systems */
 #define SYS_DVBC_ANNEX_AC	SYS_DVBC_ANNEX_A
-#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */
+#define SYS_DMBTH		SYS_DTMB /* DMB-TH is legacy name, use DTMB */
 
-/* ATSC-MH */
+/* ATSC-MH specific parameters */
 
+/**
+ * enum atscmh_sccc_block_mode - Type of Series Concatenated Convolutional
+ *				 Code Block Mode.
+ *
+ * @ATSCMH_SCCC_BLK_SEP:
+ *	Separate SCCC: the SCCC outer code mode shall be set independently
+ *	for each Group Region (A, B, C, D)
+ * @ATSCMH_SCCC_BLK_COMB:
+ *	Combined SCCC: all four Regions shall have the same SCCC outer
+ *	code mode.
+ * @ATSCMH_SCCC_BLK_RES:
+ *	Reserved. Shouldn't be used.
+ */
 enum atscmh_sccc_block_mode {
 	ATSCMH_SCCC_BLK_SEP      = 0,
 	ATSCMH_SCCC_BLK_COMB     = 1,
 	ATSCMH_SCCC_BLK_RES      = 2,
 };
 
+/**
+ * enum atscmh_sccc_code_mode - Type of Series Concatenated Convolutional
+ *				Code Rate.
+ *
+ * @ATSCMH_SCCC_CODE_HLF:
+ *	The outer code rate of a SCCC Block is 1/2 rate.
+ * @ATSCMH_SCCC_CODE_QTR:
+ *	The outer code rate of a SCCC Block is 1/4 rate.
+ * @ATSCMH_SCCC_CODE_RES:
+ *	Reserved. Should not be used.
+ */
 enum atscmh_sccc_code_mode {
 	ATSCMH_SCCC_CODE_HLF     = 0,
 	ATSCMH_SCCC_CODE_QTR     = 1,
 	ATSCMH_SCCC_CODE_RES     = 2,
 };
 
+/**
+ * enum atscmh_rs_frame_ensemble - Reed Solomon(RS) frame ensemble.
+ *
+ * @ATSCMH_RSFRAME_ENS_PRI:	Primary Ensemble.
+ * @ATSCMH_RSFRAME_ENS_SEC:	Secondary Ensemble.
+ */
 enum atscmh_rs_frame_ensemble {
 	ATSCMH_RSFRAME_ENS_PRI   = 0,
 	ATSCMH_RSFRAME_ENS_SEC   = 1,
 };
 
+/**
+ * enum atscmh_rs_frame_mode - Reed Solomon (RS) frame mode.
+ *
+ * @ATSCMH_RSFRAME_PRI_ONLY:
+ *	Single Frame: There is only a primary RS Frame for all Group
+ *	Regions.
+ * @ATSCMH_RSFRAME_PRI_SEC:
+ *	Dual Frame: There are two separate RS Frames: Primary RS Frame for
+ *	Group Region A and B and Secondary RS Frame for Group Region C and
+ *	D.
+ * @ATSCMH_RSFRAME_RES:
+ *	Reserved. Shouldn't be used.
+ */
 enum atscmh_rs_frame_mode {
 	ATSCMH_RSFRAME_PRI_ONLY  = 0,
 	ATSCMH_RSFRAME_PRI_SEC   = 1,
 	ATSCMH_RSFRAME_RES       = 2,
 };
 
+/**
+ * enum atscmh_rs_code_mode
+ * @ATSCMH_RSCODE_211_187:	Reed Solomon code (211,187).
+ * @ATSCMH_RSCODE_223_187:	Reed Solomon code (223,187).
+ * @ATSCMH_RSCODE_235_187:	Reed Solomon code (235,187).
+ * @ATSCMH_RSCODE_RES:		Reserved. Shouldn't be used.
+ */
 enum atscmh_rs_code_mode {
 	ATSCMH_RSCODE_211_187    = 0,
 	ATSCMH_RSCODE_223_187    = 1,
@@ -383,28 +732,18 @@ enum atscmh_rs_code_mode {
 #define NO_STREAM_ID_FILTER	(~0U)
 #define LNA_AUTO                (~0U)
 
-struct dtv_cmds_h {
-	char	*name;		/* A display name for debugging purposes */
-
-	__u32	cmd;		/* A unique ID */
-
-	/* Flags */
-	__u32	set:1;		/* Either a set or get property */
-	__u32	buffer:1;	/* Does this property use the buffer? */
-	__u32	reserved:30;	/* Align */
-};
-
 /**
- * Scale types for the quality parameters.
+ * enum fecap_scale_params - scale types for the quality parameters.
+ *
  * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That
  *			    could indicate a temporary or a permanent
  *			    condition.
  * @FE_SCALE_DECIBEL: The scale is measured in 0.001 dB steps, typically
- *		  used on signal measures.
+ *		      used on signal measures.
  * @FE_SCALE_RELATIVE: The scale is a relative percentual measure,
- *			ranging from 0 (0%) to 0xffff (100%).
+ *		       ranging from 0 (0%) to 0xffff (100%).
  * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like
- *			bit error, block error, lapsed time.
+ *		      bit error, block error, lapsed time.
  */
 enum fecap_scale_params {
 	FE_SCALE_NOT_AVAILABLE = 0,
@@ -416,24 +755,38 @@ enum fecap_scale_params {
 /**
  * struct dtv_stats - Used for reading a DTV status property
  *
- * @value:	value of the measure. Should range from 0 to 0xffff;
  * @scale:	Filled with enum fecap_scale_params - the scale
  *		in usage for that parameter
  *
+ * The ``{unnamed_union}`` may have either one of the values below:
+ *
+ * %svalue
+ *	integer value of the measure, for %FE_SCALE_DECIBEL,
+ *	used for dB measures. The unit is 0.001 dB.
+ *
+ * %uvalue
+ *	unsigned integer value of the measure, used when @scale is
+ *	either %FE_SCALE_RELATIVE or %FE_SCALE_COUNTER.
+ *
  * For most delivery systems, this will return a single value for each
  * parameter.
+ *
  * It should be noticed, however, that new OFDM delivery systems like
  * ISDB can use different modulation types for each group of carriers.
  * On such standards, up to 8 groups of statistics can be provided, one
  * for each carrier group (called "layer" on ISDB).
+ *
  * In order to be consistent with other delivery systems, the first
  * value refers to the entire set of carriers ("global").
- * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when
+ *
+ * @scale should use the value %FE_SCALE_NOT_AVAILABLE when
  * the value for the entire group of carriers or from one specific layer
  * is not provided by the hardware.
- * st.len should be filled with the latest filled status + 1.
  *
- * In other words, for ISDB, those values should be filled like:
+ * @len should be filled with the latest filled status + 1.
+ *
+ * In other words, for ISDB, those values should be filled like::
+ *
  *	u.st.stat.svalue[0] = global statistics;
  *	u.st.stat.scale[0] = FE_SCALE_DECIBEL;
  *	u.st.stat.value[1] = layer A statistics;
@@ -455,11 +808,39 @@ struct dtv_stats {
 
 #define MAX_DTV_STATS   4
 
+/**
+ * struct dtv_fe_stats - store Digital TV frontend statistics
+ *
+ * @len:	length of the statistics - if zero, stats is disabled.
+ * @stat:	array with digital TV statistics.
+ *
+ * On most standards, @len can either be 0 or 1. However, for ISDB, each
+ * layer is modulated in separate. So, each layer may have its own set
+ * of statistics. If so, stat[0] carries on a global value for the property.
+ * Indexes 1 to 3 means layer A to B.
+ */
 struct dtv_fe_stats {
 	__u8 len;
 	struct dtv_stats stat[MAX_DTV_STATS];
 } __attribute__ ((packed));
 
+/**
+ * struct dtv_property - store one of frontend command and its value
+ *
+ * @cmd:	Digital TV command.
+ * @reserved:	Not used.
+ * @u:		Union with the values for the command.
+ * @result:	Result of the command set (currently unused).
+ *
+ * The @u union may have either one of the values below:
+ *
+ * %data
+ *	an unsigned 32-bits number.
+ * %st
+ *	a &struct dtv_fe_stats array of statistics.
+ * %buffer
+ *	a buffer of up to 32 characters (currently unused).
+ */
 struct dtv_property {
 	__u32 cmd;
 	__u32 reserved[3];
@@ -479,17 +860,70 @@ struct dtv_property {
 /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
 #define DTV_IOCTL_MAX_MSGS 64
 
+/**
+ * struct dtv_properties - a set of command/value pairs.
+ *
+ * @num:	amount of commands stored at the struct.
+ * @props:	a pointer to &struct dtv_property.
+ */
 struct dtv_properties {
 	__u32 num;
 	struct dtv_property *props;
 };
 
-#if defined(__DVB_CORE__) || !defined (__KERNEL__)
+/*
+ * When set, this flag will disable any zigzagging or other "normal" tuning
+ * behavior. Additionally, there will be no automatic monitoring of the lock
+ * status, and hence no frontend events will be generated. If a frontend device
+ * is closed, this flag will be automatically turned off when the device is
+ * reopened read-write.
+ */
+#define FE_TUNE_MODE_ONESHOT 0x01
+
+/* Digital TV Frontend API calls */
+
+#define FE_GET_INFO		   _IOR('o', 61, struct dvb_frontend_info)
+
+#define FE_DISEQC_RESET_OVERLOAD   _IO('o', 62)
+#define FE_DISEQC_SEND_MASTER_CMD  _IOW('o', 63, struct dvb_diseqc_master_cmd)
+#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
+#define FE_DISEQC_SEND_BURST       _IO('o', 65)  /* fe_sec_mini_cmd_t */
+
+#define FE_SET_TONE		   _IO('o', 66)  /* fe_sec_tone_mode_t */
+#define FE_SET_VOLTAGE		   _IO('o', 67)  /* fe_sec_voltage_t */
+#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68)  /* int */
+
+#define FE_READ_STATUS		   _IOR('o', 69, fe_status_t)
+#define FE_READ_BER		   _IOR('o', 70, __u32)
+#define FE_READ_SIGNAL_STRENGTH    _IOR('o', 71, __u16)
+#define FE_READ_SNR		   _IOR('o', 72, __u16)
+#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
+
+#define FE_SET_FRONTEND_TUNE_MODE  _IO('o', 81) /* unsigned int */
+#define FE_GET_EVENT		   _IOR('o', 78, struct dvb_frontend_event)
+
+#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
+
+#define FE_SET_PROPERTY		   _IOW('o', 82, struct dtv_properties)
+#define FE_GET_PROPERTY		   _IOR('o', 83, struct dtv_properties)
+
+#if defined(__DVB_CORE__) || !defined(__KERNEL__)
+
+/*
+ * DEPRECATED: Everything below is deprecated in favor of DVBv5 API
+ *
+ * The DVBv3 only ioctls, structs and enums should not be used on
+ * newer programs, as it doesn't support the second generation of
+ * digital TV standards, nor supports newer delivery systems.
+ * They also don't support modern frontends with usually support multiple
+ * delivery systems.
+ *
+ * Drivers shouldn't use them.
+ *
+ * New applications should use DVBv5 delivery system instead
+ */
 
 /*
- * DEPRECATED: The DVBv3 ioctls, structs and enums should not be used on
- * newer programs, as it doesn't support the second generation of digital
- * TV standards, nor supports newer delivery systems.
  */
 
 enum fe_bandwidth {
@@ -502,7 +936,7 @@ enum fe_bandwidth {
 	BANDWIDTH_1_712_MHZ,
 };
 
-/* This is needed for legacy userspace support */
+/* This is kept for legacy userspace support */
 typedef enum fe_sec_voltage fe_sec_voltage_t;
 typedef enum fe_caps fe_caps_t;
 typedef enum fe_type fe_type_t;
@@ -520,6 +954,8 @@ typedef enum fe_pilot fe_pilot_t;
 typedef enum fe_rolloff fe_rolloff_t;
 typedef enum fe_delivery_system fe_delivery_system_t;
 
+/* DVBv3 structs */
+
 struct dvb_qpsk_parameters {
 	__u32		symbol_rate;  /* symbol rate in Symbols per second */
 	fe_code_rate_t	fec_inner;    /* forward error correction (see above) */
@@ -546,8 +982,8 @@ struct dvb_ofdm_parameters {
 };
 
 struct dvb_frontend_parameters {
-	__u32 frequency;     /* (absolute) frequency in Hz for DVB-C/DVB-T/ATSC */
-			     /* intermediate frequency in kHz for DVB-S */
+	__u32 frequency;  /* (absolute) frequency in Hz for DVB-C/DVB-T/ATSC */
+			  /* intermediate frequency in kHz for DVB-S */
 	fe_spectral_inversion_t inversion;
 	union {
 		struct dvb_qpsk_parameters qpsk;	/* DVB-S */
@@ -561,42 +997,12 @@ struct dvb_frontend_event {
 	fe_status_t status;
 	struct dvb_frontend_parameters parameters;
 };
-#endif
 
-#define FE_SET_PROPERTY		   _IOW('o', 82, struct dtv_properties)
-#define FE_GET_PROPERTY		   _IOR('o', 83, struct dtv_properties)
-
-/**
- * When set, this flag will disable any zigzagging or other "normal" tuning
- * behaviour. Additionally, there will be no automatic monitoring of the lock
- * status, and hence no frontend events will be generated. If a frontend device
- * is closed, this flag will be automatically turned off when the device is
- * reopened read-write.
- */
-#define FE_TUNE_MODE_ONESHOT 0x01
-
-#define FE_GET_INFO		   _IOR('o', 61, struct dvb_frontend_info)
-
-#define FE_DISEQC_RESET_OVERLOAD   _IO('o', 62)
-#define FE_DISEQC_SEND_MASTER_CMD  _IOW('o', 63, struct dvb_diseqc_master_cmd)
-#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
-#define FE_DISEQC_SEND_BURST       _IO('o', 65)  /* fe_sec_mini_cmd_t */
-
-#define FE_SET_TONE		   _IO('o', 66)  /* fe_sec_tone_mode_t */
-#define FE_SET_VOLTAGE		   _IO('o', 67)  /* fe_sec_voltage_t */
-#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68)  /* int */
-
-#define FE_READ_STATUS		   _IOR('o', 69, fe_status_t)
-#define FE_READ_BER		   _IOR('o', 70, __u32)
-#define FE_READ_SIGNAL_STRENGTH    _IOR('o', 71, __u16)
-#define FE_READ_SNR		   _IOR('o', 72, __u16)
-#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
+/* DVBv3 API calls */
 
 #define FE_SET_FRONTEND		   _IOW('o', 76, struct dvb_frontend_parameters)
 #define FE_GET_FRONTEND		   _IOR('o', 77, struct dvb_frontend_parameters)
-#define FE_SET_FRONTEND_TUNE_MODE  _IO('o', 81) /* unsigned int */
-#define FE_GET_EVENT		   _IOR('o', 78, struct dvb_frontend_event)
 
-#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
+#endif
 
 #endif /*_DVBFRONTEND_H_*/
diff --git a/include/uapi/linux/dvb/net.h b/include/uapi/linux/dvb/net.h
index f451e7eb0b0b..89d805f9a5a6 100644
--- a/include/uapi/linux/dvb/net.h
+++ b/include/uapi/linux/dvb/net.h
@@ -26,6 +26,21 @@
 
 #include <linux/types.h>
 
+/**
+ * struct dvb_net_if - describes a DVB network interface
+ *
+ * @pid: Packet ID (PID) of the MPEG-TS that contains data
+ * @if_num: number of the Digital TV interface.
+ * @feedtype: Encapsulation type of the feed.
+ *
+ * A MPEG-TS stream may contain packet IDs with IP packages on it.
+ * This struct describes it, and the type of encoding.
+ *
+ * @feedtype can be:
+ *
+ *	- %DVB_NET_FEEDTYPE_MPE for MPE encoding
+ *	- %DVB_NET_FEEDTYPE_ULE for ULE encoding.
+ */
 struct dvb_net_if {
 	__u16 pid;
 	__u16 if_num;
diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h
index fac96c64fe51..4865f1e71339 100644
--- a/include/uapi/linux/media.h
+++ b/include/uapi/linux/media.h
@@ -30,8 +30,6 @@
 #include <linux/types.h>
 #include <linux/version.h>
 
-#define MEDIA_API_VERSION	KERNEL_VERSION(0, 1, 0)
-
 struct media_device_info {
 	char driver[16];
 	char model[32];
@@ -187,6 +185,9 @@ struct media_device_info {
 #define MEDIA_ENT_T_V4L2_SUBDEV_LENS	MEDIA_ENT_F_LENS
 #define MEDIA_ENT_T_V4L2_SUBDEV_DECODER	MEDIA_ENT_F_ATV_DECODER
 #define MEDIA_ENT_T_V4L2_SUBDEV_TUNER	MEDIA_ENT_F_TUNER
+
+/* Obsolete symbol for media_version, no longer used in the kernel */
+#define MEDIA_API_VERSION		KERNEL_VERSION(0, 1, 0)
 #endif
 
 /* Entity flags */
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 45cf7359822c..185d6a0acc06 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -603,6 +603,11 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
 #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
 #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
+	/* 12bit raw bayer packed, 6 bytes for every 4 pixels */
+#define V4L2_PIX_FMT_SBGGR12P v4l2_fourcc('p', 'B', 'C', 'C')
+#define V4L2_PIX_FMT_SGBRG12P v4l2_fourcc('p', 'G', 'C', 'C')
+#define V4L2_PIX_FMT_SGRBG12P v4l2_fourcc('p', 'g', 'C', 'C')
+#define V4L2_PIX_FMT_SRGGB12P v4l2_fourcc('p', 'R', 'C', 'C')
 #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
 #define V4L2_PIX_FMT_SGBRG16 v4l2_fourcc('G', 'B', '1', '6') /* 16  GBGB.. RGRG.. */
 #define V4L2_PIX_FMT_SGRBG16 v4l2_fourcc('G', 'R', '1', '6') /* 16  GRGR.. BGBG.. */