Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

20 files changed, 616 insertions, 7 deletions

diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 11d11bc5c78f..22749c134117 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -705,9 +705,11 @@ __SYSCALL(__NR_seccomp, sys_seccomp)
 __SYSCALL(__NR_getrandom, sys_getrandom)
 #define __NR_memfd_create 279
 __SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 280
+__SYSCALL(__NR_bpf, sys_bpf)
 
 #undef __NR_syscalls
-#define __NR_syscalls 280
+#define __NR_syscalls 281
 
 /*
  * All syscalls below here should go away really,
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index be88166349a1..70e150ebc6c9 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -67,6 +67,7 @@ header-y += bfs_fs.h
 header-y += binfmts.h
 header-y += blkpg.h
 header-y += blktrace_api.h
+header-y += bpf.h
 header-y += bpqether.h
 header-y += bsg.h
 header-y += btrfs.h
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
new file mode 100644
index 000000000000..31b0ac208a52
--- /dev/null
+++ b/include/uapi/linux/bpf.h
@@ -0,0 +1,155 @@
+/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#ifndef _UAPI__LINUX_BPF_H__
+#define _UAPI__LINUX_BPF_H__
+
+#include <linux/types.h>
+
+/* Extended instruction set based on top of classic BPF */
+
+/* instruction classes */
+#define BPF_ALU64	0x07	/* alu mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW		0x18	/* double word */
+#define BPF_XADD	0xc0	/* exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV		0xb0	/* mov reg to reg */
+#define BPF_ARSH	0xc0	/* sign extending arithmetic shift right */
+
+/* change endianness of a register */
+#define BPF_END		0xd0	/* flags for endianness conversion: */
+#define BPF_TO_LE	0x00	/* convert to little-endian */
+#define BPF_TO_BE	0x08	/* convert to big-endian */
+#define BPF_FROM_LE	BPF_TO_LE
+#define BPF_FROM_BE	BPF_TO_BE
+
+#define BPF_JNE		0x50	/* jump != */
+#define BPF_JSGT	0x60	/* SGT is signed '>', GT in x86 */
+#define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
+#define BPF_CALL	0x80	/* function call */
+#define BPF_EXIT	0x90	/* function return */
+
+/* Register numbers */
+enum {
+	BPF_REG_0 = 0,
+	BPF_REG_1,
+	BPF_REG_2,
+	BPF_REG_3,
+	BPF_REG_4,
+	BPF_REG_5,
+	BPF_REG_6,
+	BPF_REG_7,
+	BPF_REG_8,
+	BPF_REG_9,
+	BPF_REG_10,
+	__MAX_BPF_REG,
+};
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG	__MAX_BPF_REG
+
+struct bpf_insn {
+	__u8	code;		/* opcode */
+	__u8	dst_reg:4;	/* dest register */
+	__u8	src_reg:4;	/* source register */
+	__s16	off;		/* signed offset */
+	__s32	imm;		/* signed immediate constant */
+};
+
+/* BPF syscall commands */
+enum bpf_cmd {
+	/* create a map with given type and attributes
+	 * fd = bpf(BPF_MAP_CREATE, union bpf_attr *, u32 size)
+	 * returns fd or negative error
+	 * map is deleted when fd is closed
+	 */
+	BPF_MAP_CREATE,
+
+	/* lookup key in a given map
+	 * err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)
+	 * Using attr->map_fd, attr->key, attr->value
+	 * returns zero and stores found elem into value
+	 * or negative error
+	 */
+	BPF_MAP_LOOKUP_ELEM,
+
+	/* create or update key/value pair in a given map
+	 * err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)
+	 * Using attr->map_fd, attr->key, attr->value
+	 * returns zero or negative error
+	 */
+	BPF_MAP_UPDATE_ELEM,
+
+	/* find and delete elem by key in a given map
+	 * err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)
+	 * Using attr->map_fd, attr->key
+	 * returns zero or negative error
+	 */
+	BPF_MAP_DELETE_ELEM,
+
+	/* lookup key in a given map and return next key
+	 * err = bpf(BPF_MAP_GET_NEXT_KEY, union bpf_attr *attr, u32 size)
+	 * Using attr->map_fd, attr->key, attr->next_key
+	 * returns zero and stores next key or negative error
+	 */
+	BPF_MAP_GET_NEXT_KEY,
+
+	/* verify and load eBPF program
+	 * prog_fd = bpf(BPF_PROG_LOAD, union bpf_attr *attr, u32 size)
+	 * Using attr->prog_type, attr->insns, attr->license
+	 * returns fd or negative error
+	 */
+	BPF_PROG_LOAD,
+};
+
+enum bpf_map_type {
+	BPF_MAP_TYPE_UNSPEC,
+};
+
+enum bpf_prog_type {
+	BPF_PROG_TYPE_UNSPEC,
+};
+
+union bpf_attr {
+	struct { /* anonymous struct used by BPF_MAP_CREATE command */
+		__u32	map_type;	/* one of enum bpf_map_type */
+		__u32	key_size;	/* size of key in bytes */
+		__u32	value_size;	/* size of value in bytes */
+		__u32	max_entries;	/* max number of entries in a map */
+	};
+
+	struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
+		__u32		map_fd;
+		__aligned_u64	key;
+		union {
+			__aligned_u64 value;
+			__aligned_u64 next_key;
+		};
+	};
+
+	struct { /* anonymous struct used by BPF_PROG_LOAD command */
+		__u32		prog_type;	/* one of enum bpf_prog_type */
+		__u32		insn_cnt;
+		__aligned_u64	insns;
+		__aligned_u64	license;
+		__u32		log_level;	/* verbosity level of verifier */
+		__u32		log_size;	/* size of user buffer */
+		__aligned_u64	log_buf;	/* user supplied buffer */
+	};
+} __attribute__((aligned(8)));
+
+/* integer value in 'imm' field of BPF_CALL instruction selects which helper
+ * function eBPF program intends to call
+ */
+enum bpf_func_id {
+	BPF_FUNC_unspec,
+	__BPF_FUNC_MAX_ID,
+};
+
+#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index e3c7a719c76b..99b43056a6fe 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -209,6 +209,33 @@ struct ethtool_value {
 	__u32	data;
 };
 
+enum tunable_id {
+	ETHTOOL_ID_UNSPEC,
+	ETHTOOL_RX_COPYBREAK,
+	ETHTOOL_TX_COPYBREAK,
+};
+
+enum tunable_type_id {
+	ETHTOOL_TUNABLE_UNSPEC,
+	ETHTOOL_TUNABLE_U8,
+	ETHTOOL_TUNABLE_U16,
+	ETHTOOL_TUNABLE_U32,
+	ETHTOOL_TUNABLE_U64,
+	ETHTOOL_TUNABLE_STRING,
+	ETHTOOL_TUNABLE_S8,
+	ETHTOOL_TUNABLE_S16,
+	ETHTOOL_TUNABLE_S32,
+	ETHTOOL_TUNABLE_S64,
+};
+
+struct ethtool_tunable {
+	__u32	cmd;
+	__u32	id;
+	__u32	type_id;
+	__u32	len;
+	void	*data[0];
+};
+
 /**
  * struct ethtool_regs - hardware register dump
  * @cmd: Command number = %ETHTOOL_GREGS
@@ -1152,6 +1179,8 @@ enum ethtool_sfeatures_retval_bits {
 
 #define ETHTOOL_GRSSH		0x00000046 /* Get RX flow hash configuration */
 #define ETHTOOL_SRSSH		0x00000047 /* Set RX flow hash configuration */
+#define ETHTOOL_GTUNABLE	0x00000048 /* Get tunable configuration */
+#define ETHTOOL_STUNABLE	0x00000049 /* Set tunable configuration */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/include/uapi/linux/fou.h b/include/uapi/linux/fou.h
new file mode 100644
index 000000000000..8df06894da23
--- /dev/null
+++ b/include/uapi/linux/fou.h
@@ -0,0 +1,39 @@
+/* fou.h - FOU Interface */
+
+#ifndef _UAPI_LINUX_FOU_H
+#define _UAPI_LINUX_FOU_H
+
+/* NETLINK_GENERIC related info
+ */
+#define FOU_GENL_NAME		"fou"
+#define FOU_GENL_VERSION	0x1
+
+enum {
+	FOU_ATTR_UNSPEC,
+	FOU_ATTR_PORT,				/* u16 */
+	FOU_ATTR_AF,				/* u8 */
+	FOU_ATTR_IPPROTO,			/* u8 */
+	FOU_ATTR_TYPE,				/* u8 */
+
+	__FOU_ATTR_MAX,
+};
+
+#define FOU_ATTR_MAX		(__FOU_ATTR_MAX - 1)
+
+enum {
+	FOU_CMD_UNSPEC,
+	FOU_CMD_ADD,
+	FOU_CMD_DEL,
+
+	__FOU_CMD_MAX,
+};
+
+enum {
+	FOU_ENCAP_UNSPEC,
+	FOU_ENCAP_DIRECT,
+	FOU_ENCAP_GUE,
+};
+
+#define FOU_CMD_MAX	(__FOU_CMD_MAX - 1)
+
+#endif /* _UAPI_LINUX_FOU_H */
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index 0f8210b8e0bc..aa63ed023c2b 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -128,6 +128,7 @@
 #define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
 #define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
 #define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
+#define ETH_P_XDSA	0x00F8		/* Multiplexed DSA protocol	*/
 
 /*
  *	This is an Ethernet frame header.
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index ff957604a721..0bdb77e16875 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -215,6 +215,18 @@ enum in6_addr_gen_mode {
 	IN6_ADDR_GEN_MODE_NONE,
 };
 
+/* Bridge section */
+
+enum {
+	IFLA_BR_UNSPEC,
+	IFLA_BR_FORWARD_DELAY,
+	IFLA_BR_HELLO_TIME,
+	IFLA_BR_MAX_AGE,
+	__IFLA_BR_MAX,
+};
+
+#define IFLA_BR_MAX	(__IFLA_BR_MAX - 1)
+
 enum {
 	BRIDGE_MODE_UNSPEC,
 	BRIDGE_MODE_HAIRPIN,
@@ -291,6 +303,10 @@ enum {
 	IFLA_MACVLAN_UNSPEC,
 	IFLA_MACVLAN_MODE,
 	IFLA_MACVLAN_FLAGS,
+	IFLA_MACVLAN_MACADDR_MODE,
+	IFLA_MACVLAN_MACADDR,
+	IFLA_MACVLAN_MACADDR_DATA,
+	IFLA_MACVLAN_MACADDR_COUNT,
 	__IFLA_MACVLAN_MAX,
 };
 
@@ -301,6 +317,14 @@ enum macvlan_mode {
 	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
 	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
 	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+	MACVLAN_MODE_SOURCE  = 16,/* use source MAC address list to assign */
+};
+
+enum macvlan_macaddr_mode {
+	MACVLAN_MACADDR_ADD,
+	MACVLAN_MACADDR_DEL,
+	MACVLAN_MACADDR_FLUSH,
+	MACVLAN_MACADDR_SET,
 };
 
 #define MACVLAN_FLAG_NOPROMISC	1
diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h
index 3bce9e9d9f7c..280d9e092283 100644
--- a/include/uapi/linux/if_tunnel.h
+++ b/include/uapi/linux/if_tunnel.h
@@ -53,10 +53,23 @@ enum {
 	IFLA_IPTUN_6RD_RELAY_PREFIX,
 	IFLA_IPTUN_6RD_PREFIXLEN,
 	IFLA_IPTUN_6RD_RELAY_PREFIXLEN,
+	IFLA_IPTUN_ENCAP_TYPE,
+	IFLA_IPTUN_ENCAP_FLAGS,
+	IFLA_IPTUN_ENCAP_SPORT,
+	IFLA_IPTUN_ENCAP_DPORT,
 	__IFLA_IPTUN_MAX,
 };
 #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
 
+enum tunnel_encap_types {
+	TUNNEL_ENCAP_NONE,
+	TUNNEL_ENCAP_FOU,
+	TUNNEL_ENCAP_GUE,
+};
+
+#define TUNNEL_ENCAP_FLAG_CSUM		(1<<0)
+#define TUNNEL_ENCAP_FLAG_CSUM6		(1<<1)
+
 /* SIT-mode i_flags */
 #define	SIT_ISATAP	0x0001
 
@@ -94,6 +107,10 @@ enum {
 	IFLA_GRE_ENCAP_LIMIT,
 	IFLA_GRE_FLOWINFO,
 	IFLA_GRE_FLAGS,
+	IFLA_GRE_ENCAP_TYPE,
+	IFLA_GRE_ENCAP_FLAGS,
+	IFLA_GRE_ENCAP_SPORT,
+	IFLA_GRE_ENCAP_DPORT,
 	__IFLA_GRE_MAX,
 };
 
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
index bbde90fa5838..d65c0a09efd3 100644
--- a/include/uapi/linux/inet_diag.h
+++ b/include/uapi/linux/inet_diag.h
@@ -110,10 +110,10 @@ enum {
 	INET_DIAG_TCLASS,
 	INET_DIAG_SKMEMINFO,
 	INET_DIAG_SHUTDOWN,
+	INET_DIAG_DCTCPINFO,
 };
 
-#define INET_DIAG_MAX INET_DIAG_SHUTDOWN
-
+#define INET_DIAG_MAX INET_DIAG_DCTCPINFO
 
 /* INET_DIAG_MEM */
 
@@ -133,5 +133,14 @@ struct tcpvegas_info {
 	__u32	tcpv_minrtt;
 };
 
+/* INET_DIAG_DCTCPINFO */
+
+struct tcp_dctcp_info {
+	__u16	dctcp_enabled;
+	__u16	dctcp_ce_state;
+	__u32	dctcp_alpha;
+	__u32	dctcp_ab_ecn;
+	__u32	dctcp_ab_tot;
+};
 
 #endif /* _UAPI_INET_DIAG_H_ */
diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h
index fbcffe8041f7..cabe95d5b461 100644
--- a/include/uapi/linux/ip_vs.h
+++ b/include/uapi/linux/ip_vs.h
@@ -384,6 +384,9 @@ enum {
 	IPVS_DEST_ATTR_PERSIST_CONNS,	/* persistent connections */
 
 	IPVS_DEST_ATTR_STATS,		/* nested attribute for dest stats */
+
+	IPVS_DEST_ATTR_ADDR_FAMILY,	/* Address family of address */
+
 	__IPVS_DEST_ATTR_MAX,
 };
 
diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h
index 78c2f2e79920..ca03119111a2 100644
--- a/include/uapi/linux/netfilter/ipset/ip_set.h
+++ b/include/uapi/linux/netfilter/ipset/ip_set.h
@@ -115,6 +115,9 @@ enum {
 	IPSET_ATTR_BYTES,
 	IPSET_ATTR_PACKETS,
 	IPSET_ATTR_COMMENT,
+	IPSET_ATTR_SKBMARK,
+	IPSET_ATTR_SKBPRIO,
+	IPSET_ATTR_SKBQUEUE,
 	__IPSET_ATTR_ADT_MAX,
 };
 #define IPSET_ATTR_ADT_MAX	(__IPSET_ATTR_ADT_MAX - 1)
@@ -147,6 +150,7 @@ enum ipset_errno {
 	IPSET_ERR_COUNTER,
 	IPSET_ERR_COMMENT,
 	IPSET_ERR_INVALID_MARKMASK,
+	IPSET_ERR_SKBINFO,
 
 	/* Type specific error codes */
 	IPSET_ERR_TYPE_SPECIFIC = 4352,
@@ -170,6 +174,12 @@ enum ipset_cmd_flags {
 	IPSET_FLAG_MATCH_COUNTERS = (1 << IPSET_FLAG_BIT_MATCH_COUNTERS),
 	IPSET_FLAG_BIT_RETURN_NOMATCH = 7,
 	IPSET_FLAG_RETURN_NOMATCH = (1 << IPSET_FLAG_BIT_RETURN_NOMATCH),
+	IPSET_FLAG_BIT_MAP_SKBMARK = 8,
+	IPSET_FLAG_MAP_SKBMARK = (1 << IPSET_FLAG_BIT_MAP_SKBMARK),
+	IPSET_FLAG_BIT_MAP_SKBPRIO = 9,
+	IPSET_FLAG_MAP_SKBPRIO = (1 << IPSET_FLAG_BIT_MAP_SKBPRIO),
+	IPSET_FLAG_BIT_MAP_SKBQUEUE = 10,
+	IPSET_FLAG_MAP_SKBQUEUE = (1 << IPSET_FLAG_BIT_MAP_SKBQUEUE),
 	IPSET_FLAG_CMD_MAX = 15,
 };
 
@@ -187,6 +197,8 @@ enum ipset_cadt_flags {
 	IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT),
 	IPSET_FLAG_BIT_WITH_FORCEADD = 5,
 	IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD),
+	IPSET_FLAG_BIT_WITH_SKBINFO = 6,
+	IPSET_FLAG_WITH_SKBINFO = (1 << IPSET_FLAG_BIT_WITH_SKBINFO),
 	IPSET_FLAG_CADT_MAX	= 15,
 };
 
diff --git a/include/uapi/linux/netfilter/nf_nat.h b/include/uapi/linux/netfilter/nf_nat.h
index 1ad3659102b6..0880781ad7b6 100644
--- a/include/uapi/linux/netfilter/nf_nat.h
+++ b/include/uapi/linux/netfilter/nf_nat.h
@@ -13,6 +13,11 @@
 #define NF_NAT_RANGE_PROTO_RANDOM_ALL		\
 	(NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY)
 
+#define NF_NAT_RANGE_MASK					\
+	(NF_NAT_RANGE_MAP_IPS | NF_NAT_RANGE_PROTO_SPECIFIED |	\
+	 NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PERSISTENT |	\
+	 NF_NAT_RANGE_PROTO_RANDOM_FULLY)
+
 struct nf_nat_ipv4_range {
 	unsigned int			flags;
 	__be32				min_ip;
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 801bdd1e56e3..c26df6787fb0 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -51,6 +51,8 @@ enum nft_verdicts {
  * @NFT_MSG_NEWSETELEM: create a new set element (enum nft_set_elem_attributes)
  * @NFT_MSG_GETSETELEM: get a set element (enum nft_set_elem_attributes)
  * @NFT_MSG_DELSETELEM: delete a set element (enum nft_set_elem_attributes)
+ * @NFT_MSG_NEWGEN: announce a new generation, only for events (enum nft_gen_attributes)
+ * @NFT_MSG_GETGEN: get the rule-set generation (enum nft_gen_attributes)
  */
 enum nf_tables_msg_types {
 	NFT_MSG_NEWTABLE,
@@ -68,6 +70,8 @@ enum nf_tables_msg_types {
 	NFT_MSG_NEWSETELEM,
 	NFT_MSG_GETSETELEM,
 	NFT_MSG_DELSETELEM,
+	NFT_MSG_NEWGEN,
+	NFT_MSG_GETGEN,
 	NFT_MSG_MAX,
 };
 
@@ -571,6 +575,10 @@ enum nft_exthdr_attributes {
  * @NFT_META_L4PROTO: layer 4 protocol number
  * @NFT_META_BRI_IIFNAME: packet input bridge interface name
  * @NFT_META_BRI_OIFNAME: packet output bridge interface name
+ * @NFT_META_PKTTYPE: packet type (skb->pkt_type), special handling for loopback
+ * @NFT_META_CPU: cpu id through smp_processor_id()
+ * @NFT_META_IIFGROUP: packet input interface group
+ * @NFT_META_OIFGROUP: packet output interface group
  */
 enum nft_meta_keys {
 	NFT_META_LEN,
@@ -592,6 +600,10 @@ enum nft_meta_keys {
 	NFT_META_L4PROTO,
 	NFT_META_BRI_IIFNAME,
 	NFT_META_BRI_OIFNAME,
+	NFT_META_PKTTYPE,
+	NFT_META_CPU,
+	NFT_META_IIFGROUP,
+	NFT_META_OIFGROUP,
 };
 
 /**
@@ -737,13 +749,34 @@ enum nft_queue_attributes {
  *
  * @NFT_REJECT_ICMP_UNREACH: reject using ICMP unreachable
  * @NFT_REJECT_TCP_RST: reject using TCP RST
+ * @NFT_REJECT_ICMPX_UNREACH: abstracted ICMP unreachable for bridge and inet
  */
 enum nft_reject_types {
 	NFT_REJECT_ICMP_UNREACH,
 	NFT_REJECT_TCP_RST,
+	NFT_REJECT_ICMPX_UNREACH,
 };
 
 /**
+ * enum nft_reject_code - Generic reject codes for IPv4/IPv6
+ *
+ * @NFT_REJECT_ICMPX_NO_ROUTE: no route to host / network unreachable
+ * @NFT_REJECT_ICMPX_PORT_UNREACH: port unreachable
+ * @NFT_REJECT_ICMPX_HOST_UNREACH: host unreachable
+ * @NFT_REJECT_ICMPX_ADMIN_PROHIBITED: administratively prohibited
+ *
+ * These codes are mapped to real ICMP and ICMPv6 codes.
+ */
+enum nft_reject_inet_code {
+	NFT_REJECT_ICMPX_NO_ROUTE	= 0,
+	NFT_REJECT_ICMPX_PORT_UNREACH,
+	NFT_REJECT_ICMPX_HOST_UNREACH,
+	NFT_REJECT_ICMPX_ADMIN_PROHIBITED,
+	__NFT_REJECT_ICMPX_MAX
+};
+#define NFT_REJECT_ICMPX_MAX	(__NFT_REJECT_ICMPX_MAX + 1)
+
+/**
  * enum nft_reject_attributes - nf_tables reject expression netlink attributes
  *
  * @NFTA_REJECT_TYPE: packet type to use (NLA_U32: nft_reject_types)
@@ -777,6 +810,7 @@ enum nft_nat_types {
  * @NFTA_NAT_REG_ADDR_MAX: source register of address range end (NLA_U32: nft_registers)
  * @NFTA_NAT_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers)
  * @NFTA_NAT_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers)
+ * @NFTA_NAT_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32)
  */
 enum nft_nat_attributes {
 	NFTA_NAT_UNSPEC,
@@ -786,8 +820,33 @@ enum nft_nat_attributes {
 	NFTA_NAT_REG_ADDR_MAX,
 	NFTA_NAT_REG_PROTO_MIN,
 	NFTA_NAT_REG_PROTO_MAX,
+	NFTA_NAT_FLAGS,
 	__NFTA_NAT_MAX
 };
 #define NFTA_NAT_MAX		(__NFTA_NAT_MAX - 1)
 
+/**
+ * enum nft_masq_attributes - nf_tables masquerade expression attributes
+ *
+ * @NFTA_MASQ_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32)
+ */
+enum nft_masq_attributes {
+	NFTA_MASQ_UNSPEC,
+	NFTA_MASQ_FLAGS,
+	__NFTA_MASQ_MAX
+};
+#define NFTA_MASQ_MAX		(__NFTA_MASQ_MAX - 1)
+
+/**
+ * enum nft_gen_attributes - nf_tables ruleset generation attributes
+ *
+ * @NFTA_GEN_ID: Ruleset generation ID (NLA_U32)
+ */
+enum nft_gen_attributes {
+	NFTA_GEN_UNSPEC,
+	NFTA_GEN_ID,
+	__NFTA_GEN_MAX
+};
+#define NFTA_GEN_MAX		(__NFTA_GEN_MAX - 1)
+
 #endif /* _LINUX_NF_TABLES_H */
diff --git a/include/uapi/linux/netfilter/nfnetlink_acct.h b/include/uapi/linux/netfilter/nfnetlink_acct.h
index 51404ec19022..f3e34dbbf966 100644
--- a/include/uapi/linux/netfilter/nfnetlink_acct.h
+++ b/include/uapi/linux/netfilter/nfnetlink_acct.h
@@ -28,9 +28,17 @@ enum nfnl_acct_type {
 	NFACCT_USE,
 	NFACCT_FLAGS,
 	NFACCT_QUOTA,
+	NFACCT_FILTER,
 	__NFACCT_MAX
 };
 #define NFACCT_MAX (__NFACCT_MAX - 1)
 
+enum nfnl_attr_filter_type {
+	NFACCT_FILTER_UNSPEC,
+	NFACCT_FILTER_MASK,
+	NFACCT_FILTER_VALUE,
+	__NFACCT_FILTER_MAX
+};
+#define NFACCT_FILTER_MAX (__NFACCT_FILTER_MAX - 1)
 
 #endif /* _UAPI_NFNL_ACCT_H_ */
diff --git a/include/uapi/linux/netfilter/xt_set.h b/include/uapi/linux/netfilter/xt_set.h
index 964d3d42f874..d6a1df1f2947 100644
--- a/include/uapi/linux/netfilter/xt_set.h
+++ b/include/uapi/linux/netfilter/xt_set.h
@@ -71,4 +71,14 @@ struct xt_set_info_match_v3 {
 	__u32 flags;
 };
 
+/* Revision 3 target */
+
+struct xt_set_info_target_v3 {
+	struct xt_set_info add_set;
+	struct xt_set_info del_set;
+	struct xt_set_info map_set;
+	__u32 flags;
+	__u32 timeout;
+};
+
 #endif /*_XT_SET_H*/
diff --git a/include/uapi/linux/netfilter_arp/arpt_mangle.h b/include/uapi/linux/netfilter_arp/arpt_mangle.h
index 250f502902bb..8c2b16a1f5a0 100644
--- a/include/uapi/linux/netfilter_arp/arpt_mangle.h
+++ b/include/uapi/linux/netfilter_arp/arpt_mangle.h
@@ -13,7 +13,7 @@ struct arpt_mangle
 	union {
 		struct in_addr tgt_ip;
 	} u_t;
-	u_int8_t flags;
+	__u8 flags;
 	int target;
 };
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f1db15b9c041..4b28dc07bcb1 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -722,6 +722,22 @@
  *	QoS mapping is relevant for IP packets, it is only valid during an
  *	association. This is cleared on disassociation and AP restart.
  *
+ * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
+ *	%NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
+ *	and %NL80211_ATTR_ADMITTED_TIME parameters.
+ *	Note that the action frame handshake with the AP shall be handled by
+ *	userspace via the normal management RX/TX framework, this only sets
+ *	up the TX TS in the driver/device.
+ *	If the admitted time attribute is not added then the request just checks
+ *	if a subsequent setup could be successful, the intent is to use this to
+ *	avoid setting up a session with the AP when local restrictions would
+ *	make that impossible. However, the subsequent "real" setup may still
+ *	fail even if the check was successful.
+ * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
+ *	and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
+ *	before removing a station entry entirely, or before disassociating
+ *	or similar, cleanup will happen in the driver/device in this case.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -893,6 +909,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_QOS_MAP,
 
+	NL80211_CMD_ADD_TX_TS,
+	NL80211_CMD_DEL_TX_TS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1594,6 +1613,31 @@ enum nl80211_commands {
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
  *
+ * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
+ *	shall support Radio Resource Measurements (11k). This attribute can be
+ *	used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
+ *	User space applications are expected to use this flag only if the
+ *	underlying device supports these minimal RRM features:
+ *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
+ *		%NL80211_FEATURE_QUIET,
+ *	If this flag is used, driver must add the Power Capabilities IE to the
+ *	association request. In addition, it must also set the RRM capability
+ *	flag in the association request's Capability Info field.
+ *
+ * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
+ *	estimation algorithm (dynack). In order to activate dynack
+ *	%NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
+ *	drivers to indicate dynack capability. Dynack is automatically disabled
+ *	setting valid value for coverage class.
+ *
+ * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
+ * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
+ * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
+ *	(per second) (u16 attribute)
+ *
+ * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
+ *	&enum nl80211_smps_mode.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1936,6 +1980,16 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_TDLS_INITIATOR,
 
+	NL80211_ATTR_USE_RRM,
+
+	NL80211_ATTR_WIPHY_DYN_ACK,
+
+	NL80211_ATTR_TSID,
+	NL80211_ATTR_USER_PRIO,
+	NL80211_ATTR_ADMITTED_TIME,
+
+	NL80211_ATTR_SMPS_MODE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3055,14 +3109,20 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
  * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
  * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ *	(if @NL80211_BSS_PRESP_DATA is present then this is known to be
+ *	from a probe response, otherwise it may be from the same beacon
+ *	that the NL80211_BSS_BEACON_TSF will be from)
  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
  * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
  * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
  *	raw information elements from the probe response/beacon (bin);
- *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
- *	from a Probe Response frame; otherwise they are from a Beacon frame.
+ *	if the %NL80211_BSS_BEACON_IES attribute is present and the data is
+ *	different then the IEs here are from a Probe Response frame; otherwise
+ *	they are from a Beacon frame.
  *	However, if the driver does not indicate the source of the IEs, these
  *	IEs may be from either frame subtype.
+ *	If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
+ *	data here is known to be from a probe response, without any heuristics.
  * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
  *	in mBm (100 * dBm) (s32)
  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
@@ -3074,6 +3134,10 @@ enum nl80211_bss_scan_width {
  *	yet been received
  * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
  *	(u32, enum nl80211_bss_scan_width)
+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
+ *	(not present if no beacon frame has been received yet)
+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
+ *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -3091,6 +3155,8 @@ enum nl80211_bss {
 	NL80211_BSS_SEEN_MS_AGO,
 	NL80211_BSS_BEACON_IES,
 	NL80211_BSS_CHAN_WIDTH,
+	NL80211_BSS_BEACON_TSF,
+	NL80211_BSS_PRESP_DATA,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -3956,6 +4022,26 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
  *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
  *	lifetime of a BSS.
+ * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
+ *	Set IE to probe requests.
+ * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
+ *	to probe requests.
+ * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
+ *	requests sent to it by an AP.
+ * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
+ *	current tx power value into the TPC Report IE in the spectrum
+ *	management TPC Report action frame, and in the Radio Measurement Link
+ *	Measurement Report action frame.
+ * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
+ *	estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
+ *	to enable dynack.
+ * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
+ *	multiplexing powersave, ie. can turn off all but one chain
+ *	even on HT connections that should be using more chains.
+ * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
+ *	multiplexing powersave, ie. can turn off all but one chain
+ *	and then wake the rest up as required after, for example,
+ *	rts/cts handshake.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -3977,6 +4063,13 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
 	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
 	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18,
+	NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES	= 1 << 19,
+	NL80211_FEATURE_WFA_TPC_IE_IN_PROBES		= 1 << 20,
+	NL80211_FEATURE_QUIET				= 1 << 21,
+	NL80211_FEATURE_TX_POWER_INSERTION		= 1 << 22,
+	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
+	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
+	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
 };
 
 /**
@@ -4051,6 +4144,25 @@ enum nl80211_acl_policy {
 };
 
 /**
+ * enum nl80211_smps_mode - SMPS mode
+ *
+ * Requested SMPS mode (for AP mode)
+ *
+ * @NL80211_SMPS_OFF: SMPS off (use all antennas).
+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
+ *	turn on other antennas after CTS/RTS).
+ */
+enum nl80211_smps_mode {
+	NL80211_SMPS_OFF,
+	NL80211_SMPS_STATIC,
+	NL80211_SMPS_DYNAMIC,
+
+	__NL80211_SMPS_AFTER_LAST,
+	NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_radar_event - type of radar event for DFS operation
  *
  * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h
index a794d1dd7b40..435eabc5ffaa 100644
--- a/include/uapi/linux/openvswitch.h
+++ b/include/uapi/linux/openvswitch.h
@@ -192,6 +192,7 @@ enum ovs_vport_type {
 	OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */
 	OVS_VPORT_TYPE_GRE,      /* GRE tunnel. */
 	OVS_VPORT_TYPE_VXLAN,	 /* VXLAN tunnel. */
+	OVS_VPORT_TYPE_GENEVE,	 /* Geneve tunnel. */
 	__OVS_VPORT_TYPE_MAX
 };
 
@@ -289,9 +290,12 @@ enum ovs_key_attr {
 	OVS_KEY_ATTR_TUNNEL,    /* Nested set of ovs_tunnel attributes */
 	OVS_KEY_ATTR_SCTP,      /* struct ovs_key_sctp */
 	OVS_KEY_ATTR_TCP_FLAGS,	/* be16 TCP flags. */
+	OVS_KEY_ATTR_DP_HASH,      /* u32 hash value. Value 0 indicates the hash
+				   is not computed by the datapath. */
+	OVS_KEY_ATTR_RECIRC_ID, /* u32 recirc id */
 
 #ifdef __KERNEL__
-	OVS_KEY_ATTR_IPV4_TUNNEL,  /* struct ovs_key_ipv4_tunnel */
+	OVS_KEY_ATTR_TUNNEL_INFO,  /* struct ovs_tunnel_info */
 #endif
 	__OVS_KEY_ATTR_MAX
 };
@@ -306,6 +310,8 @@ enum ovs_tunnel_key_attr {
 	OVS_TUNNEL_KEY_ATTR_TTL,                /* u8 Tunnel IP TTL. */
 	OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT,      /* No argument, set DF. */
 	OVS_TUNNEL_KEY_ATTR_CSUM,               /* No argument. CSUM packet. */
+	OVS_TUNNEL_KEY_ATTR_OAM,                /* No argument. OAM frame.  */
+	OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS,        /* Array of Geneve options. */
 	__OVS_TUNNEL_KEY_ATTR_MAX
 };
 
@@ -493,6 +499,27 @@ struct ovs_action_push_vlan {
 	__be16 vlan_tci;	/* 802.1Q TCI (VLAN ID and priority). */
 };
 
+/* Data path hash algorithm for computing Datapath hash.
+ *
+ * The algorithm type only specifies the fields in a flow
+ * will be used as part of the hash. Each datapath is free
+ * to use its own hash algorithm. The hash value will be
+ * opaque to the user space daemon.
+ */
+enum ovs_hash_alg {
+	OVS_HASH_ALG_L4,
+};
+
+/*
+ * struct ovs_action_hash - %OVS_ACTION_ATTR_HASH action argument.
+ * @hash_alg: Algorithm used to compute hash prior to recirculation.
+ * @hash_basis: basis used for computing hash.
+ */
+struct ovs_action_hash {
+	uint32_t  hash_alg;     /* One of ovs_hash_alg. */
+	uint32_t  hash_basis;
+};
+
 /**
  * enum ovs_action_attr - Action types.
  *
@@ -521,6 +548,8 @@ enum ovs_action_attr {
 	OVS_ACTION_ATTR_PUSH_VLAN,    /* struct ovs_action_push_vlan. */
 	OVS_ACTION_ATTR_POP_VLAN,     /* No argument. */
 	OVS_ACTION_ATTR_SAMPLE,       /* Nested OVS_SAMPLE_ATTR_*. */
+	OVS_ACTION_ATTR_RECIRC,       /* u32 recirc_id. */
+	OVS_ACTION_ATTR_HASH,	      /* struct ovs_action_hash. */
 	__OVS_ACTION_ATTR_MAX
 };
 
diff --git a/include/uapi/linux/wil6210_uapi.h b/include/uapi/linux/wil6210_uapi.h
new file mode 100644
index 000000000000..6a3cddd156c4
--- /dev/null
+++ b/include/uapi/linux/wil6210_uapi.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __WIL6210_UAPI_H__
+#define __WIL6210_UAPI_H__
+
+#if !defined(__KERNEL__)
+#define __user
+#endif
+
+#include <linux/sockios.h>
+
+/* Numbers SIOCDEVPRIVATE and SIOCDEVPRIVATE + 1
+ * are used by Android devices to implement PNO (preferred network offload).
+ * Albeit it is temporary solution, use different numbers to avoid conflicts
+ */
+
+/**
+ * Perform 32-bit I/O operation to the card memory
+ *
+ * User code should arrange data in memory like this:
+ *
+ *	struct wil_memio io;
+ *	struct ifreq ifr = {
+ *		.ifr_data = &io,
+ *	};
+ */
+#define WIL_IOCTL_MEMIO (SIOCDEVPRIVATE + 2)
+
+/**
+ * Perform block I/O operation to the card memory
+ *
+ * User code should arrange data in memory like this:
+ *
+ *	void *buf;
+ *	struct wil_memio_block io = {
+ *		.block = buf,
+ *	};
+ *	struct ifreq ifr = {
+ *		.ifr_data = &io,
+ *	};
+ */
+#define WIL_IOCTL_MEMIO_BLOCK (SIOCDEVPRIVATE + 3)
+
+/**
+ * operation to perform
+ *
+ * @wil_mmio_op_mask - bits defining operation,
+ * @wil_mmio_addr_mask - bits defining addressing mode
+ */
+enum wil_memio_op {
+	wil_mmio_read = 0,
+	wil_mmio_write = 1,
+	wil_mmio_op_mask = 0xff,
+	wil_mmio_addr_linker = 0 << 8,
+	wil_mmio_addr_ahb = 1 << 8,
+	wil_mmio_addr_bar = 2 << 8,
+	wil_mmio_addr_mask = 0xff00,
+};
+
+struct wil_memio {
+	uint32_t op; /* enum wil_memio_op */
+	uint32_t addr; /* should be 32-bit aligned */
+	uint32_t val;
+};
+
+struct wil_memio_block {
+	uint32_t op; /* enum wil_memio_op */
+	uint32_t addr; /* should be 32-bit aligned */
+	uint32_t size; /* should be multiple of 4 */
+	void __user *block; /* block address */
+};
+
+#endif /* __WIL6210_UAPI_H__ */
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index 25e5dd916ba4..02d5125a5ee8 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -328,6 +328,8 @@ enum xfrm_spdattr_type_t {
 	XFRMA_SPD_UNSPEC,
 	XFRMA_SPD_INFO,
 	XFRMA_SPD_HINFO,
+	XFRMA_SPD_IPV4_HTHRESH,
+	XFRMA_SPD_IPV6_HTHRESH,
 	__XFRMA_SPD_MAX
 
 #define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1)
@@ -347,6 +349,11 @@ struct xfrmu_spdhinfo {
 	__u32 spdhmcnt;
 };
 
+struct xfrmu_spdhthresh {
+	__u8 lbits;
+	__u8 rbits;
+};
+
 struct xfrm_usersa_info {
 	struct xfrm_selector		sel;
 	struct xfrm_id			id;