Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

12 files changed, 420 insertions, 12 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 90706a47f6ff..35bcf52dbc65 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1425,6 +1425,8 @@ enum {
 #define BPF_F_TEST_RUN_ON_CPU	(1U << 0)
 /* If set, XDP frames will be transmitted after processing */
 #define BPF_F_TEST_XDP_LIVE_FRAMES	(1U << 1)
+/* If set, apply CHECKSUM_COMPLETE to skb and validate the checksum */
+#define BPF_F_TEST_SKB_CHECKSUM_COMPLETE	(1U << 2)
 
 /* type for BPF_ENABLE_STATS */
 enum bpf_stats_type {
@@ -6207,12 +6209,17 @@ union {					\
 	__u64 :64;			\
 } __attribute__((aligned(8)))
 
+/* The enum used in skb->tstamp_type. It specifies the clock type
+ * of the time stored in the skb->tstamp.
+ */
 enum {
-	BPF_SKB_TSTAMP_UNSPEC,
-	BPF_SKB_TSTAMP_DELIVERY_MONO,	/* tstamp has mono delivery time */
-	/* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle,
-	 * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC
-	 * and try to deduce it by ingress, egress or skb->sk->sk_clockid.
+	BPF_SKB_TSTAMP_UNSPEC = 0,		/* DEPRECATED */
+	BPF_SKB_TSTAMP_DELIVERY_MONO = 1,	/* DEPRECATED */
+	BPF_SKB_CLOCK_REALTIME = 0,
+	BPF_SKB_CLOCK_MONOTONIC = 1,
+	BPF_SKB_CLOCK_TAI = 2,
+	/* For any future BPF_SKB_CLOCK_* that the bpf prog cannot handle,
+	 * the bpf prog can try to deduce it by ingress/egress/skb->sk->sk_clockid.
 	 */
 };
 
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
index 6cde62371b6f..bd990917f7c4 100644
--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -2,7 +2,7 @@
 /*
  * linux/can/isotp.h
  *
- * Definitions for isotp CAN sockets (ISO 15765-2:2016)
+ * Definitions for ISO 15765-2 CAN transport protocol sockets
  *
  * Copyright (c) 2020 Volkswagen Group Electronic Research
  * All rights reserved.
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 8733a3117902..4a0a6e703483 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -753,6 +753,197 @@ enum ethtool_module_power_mode {
 };
 
 /**
+ * enum ethtool_c33_pse_ext_state - groups of PSE extended states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted
+ *	states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states
+ * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type
+ *	states
+ * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available
+ *	states
+ * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states
+ */
+enum ethtool_c33_pse_ext_state {
+	ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1,
+	ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID,
+	ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE,
+	ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+	ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+	ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED,
+	ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE,
+	ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+	ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload
+ *	state
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not
+ *	connected
+ *
+ * The PSE monitors either the DC or AC Maintain Power Signature
+ * (MPS, see 33.2.9.1). This variable indicates the presence or absence of
+ * a valid MPS.
+ */
+enum ethtool_c33_pse_ext_substate_mr_mps_valid {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing
+ *	port number
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal
+ *	hardware fault
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON:
+ *	Communication error after force on
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown
+ *	port status
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host
+ *	crash turn off
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN:
+ *	Host crash force shutdown
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration
+ *	change
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over
+ *	temperature detected
+ *
+ * error_condition is a variable indicating the status of
+ * implementation-specific fault conditions or optionally other system faults
+ * that prevent the PSE from meeting the specifications in Table 33–11 and that
+ * require the PSE not to source power. These error conditions are different
+ * from those monitored by the state diagrams in Figure 33–10.
+ */
+enum ethtool_c33_pse_ext_substate_error_condition {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable
+ *	pin active
+ *
+ * mr_pse_enable is control variable that selects PSE operation and test
+ * functions.
+ */
+enum ethtool_c33_pse_ext_substate_mr_pse_enable {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted
+ *	states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection
+ *	in process
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR:
+ *	Connection check error
+ *
+ * option_detect_ted is a variable indicating if detection can be performed
+ * by the PSE during the ted_timer interval.
+ */
+enum ethtool_c33_pse_ext_substate_option_detect_ted {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply
+ *	voltage is high
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply
+ *	voltage is low
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage
+ *	injection into the port
+ *
+ * option_vport_lim is an optional variable indicates if VPSE is out of the
+ * operating range during normal operating state.
+ */
+enum ethtool_c33_pse_ext_substate_option_vport_lim {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state
+ *
+ * ovld_detected is a variable indicating if the PSE output current has been
+ * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second
+ * sliding time.
+ */
+enum ethtool_c33_pse_ext_substate_ovld_detected {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available
+ *	states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power
+ *	budget exceeded for the controller
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET:
+ *	Configured port power limit exceeded controller power budget
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT:
+ *	Power request from PD exceeds port limit
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power
+ *	denied due to Hardware power limit
+ *
+ * power_not_available is a variable that is asserted in an
+ * implementation-dependent manner when the PSE is no longer capable of
+ * sourcing sufficient power to support the attached PD. Sufficient power
+ * is defined by classification; see 33.2.6.
+ */
+enum ethtool_c33_pse_ext_substate_power_not_available {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED =  1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short
+ *	condition was detected
+ *
+ * short_detected is a variable indicating if the PSE output current has been
+ * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7).
+ */
+enum ethtool_c33_pse_ext_substate_short_detected {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1,
+};
+
+/**
  * enum ethtool_pse_types - Types of PSE controller.
  * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown
  * @ETHTOOL_PSE_PODL: PSE controller which support PoDL
@@ -878,6 +1069,24 @@ enum ethtool_mm_verify_status {
 };
 
 /**
+ * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has
+ *	started.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process
+ *	is in progress.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was
+ *	completed successfully.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was
+ *	stopped due to an error.
+ */
+enum ethtool_module_fw_flash_status {
+	ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1,
+	ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS,
+	ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED,
+	ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR,
+};
+
+/**
  * struct ethtool_gstrings - string set for data tagging
  * @cmd: Command number = %ETHTOOL_GSTRINGS
  * @string_set: String set ID; one of &enum ethtool_stringset
@@ -1845,6 +2054,7 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_10baseT1S_Full_BIT		 = 99,
 	ETHTOOL_LINK_MODE_10baseT1S_Half_BIT		 = 100,
 	ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT	 = 101,
+	ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT		 = 102,
 
 	/* must be last entry */
 	__ETHTOOL_LINK_MODE_MASK_NBITS
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index b49b804b9495..6d5bdcc67631 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -57,6 +57,7 @@ enum {
 	ETHTOOL_MSG_PLCA_GET_STATUS,
 	ETHTOOL_MSG_MM_GET,
 	ETHTOOL_MSG_MM_SET,
+	ETHTOOL_MSG_MODULE_FW_FLASH_ACT,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -109,6 +110,7 @@ enum {
 	ETHTOOL_MSG_PLCA_NTF,
 	ETHTOOL_MSG_MM_GET_REPLY,
 	ETHTOOL_MSG_MM_NTF,
+	ETHTOOL_MSG_MODULE_FW_FLASH_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -415,12 +417,34 @@ enum {
 	ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES,		/* u32 */
 	ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES,		/* u32 */
 	ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS,		/* u32 */
+	/* nest - _A_PROFILE_IRQ_MODERATION */
+	ETHTOOL_A_COALESCE_RX_PROFILE,
+	/* nest - _A_PROFILE_IRQ_MODERATION */
+	ETHTOOL_A_COALESCE_TX_PROFILE,
 
 	/* add new constants above here */
 	__ETHTOOL_A_COALESCE_CNT,
 	ETHTOOL_A_COALESCE_MAX = (__ETHTOOL_A_COALESCE_CNT - 1)
 };
 
+enum {
+	ETHTOOL_A_PROFILE_UNSPEC,
+	/* nest, _A_IRQ_MODERATION_* */
+	ETHTOOL_A_PROFILE_IRQ_MODERATION,
+	__ETHTOOL_A_PROFILE_CNT,
+	ETHTOOL_A_PROFILE_MAX = (__ETHTOOL_A_PROFILE_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_IRQ_MODERATION_UNSPEC,
+	ETHTOOL_A_IRQ_MODERATION_USEC,			/* u32 */
+	ETHTOOL_A_IRQ_MODERATION_PKTS,			/* u32 */
+	ETHTOOL_A_IRQ_MODERATION_COMPS,			/* u32 */
+
+	__ETHTOOL_A_IRQ_MODERATION_CNT,
+	ETHTOOL_A_IRQ_MODERATION_MAX = (__ETHTOOL_A_IRQ_MODERATION_CNT - 1)
+};
+
 /* PAUSE */
 
 enum {
@@ -907,6 +931,12 @@ enum {
 
 /* Power Sourcing Equipment */
 enum {
+	ETHTOOL_A_C33_PSE_PW_LIMIT_UNSPEC,
+	ETHTOOL_A_C33_PSE_PW_LIMIT_MIN,	/* u32 */
+	ETHTOOL_A_C33_PSE_PW_LIMIT_MAX,	/* u32 */
+};
+
+enum {
 	ETHTOOL_A_PSE_UNSPEC,
 	ETHTOOL_A_PSE_HEADER,			/* nest - _A_HEADER_* */
 	ETHTOOL_A_PODL_PSE_ADMIN_STATE,		/* u32 */
@@ -915,6 +945,12 @@ enum {
 	ETHTOOL_A_C33_PSE_ADMIN_STATE,		/* u32 */
 	ETHTOOL_A_C33_PSE_ADMIN_CONTROL,	/* u32 */
 	ETHTOOL_A_C33_PSE_PW_D_STATUS,		/* u32 */
+	ETHTOOL_A_C33_PSE_PW_CLASS,		/* u32 */
+	ETHTOOL_A_C33_PSE_ACTUAL_PW,		/* u32 */
+	ETHTOOL_A_C33_PSE_EXT_STATE,		/* u32 */
+	ETHTOOL_A_C33_PSE_EXT_SUBSTATE,		/* u32 */
+	ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT,	/* u32 */
+	ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES,	/* nest - _C33_PSE_PW_LIMIT_* */
 
 	/* add new constants above here */
 	__ETHTOOL_A_PSE_CNT,
@@ -996,6 +1032,23 @@ enum {
 	ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1)
 };
 
+/* MODULE_FW_FLASH */
+
+enum {
+	ETHTOOL_A_MODULE_FW_FLASH_UNSPEC,
+	ETHTOOL_A_MODULE_FW_FLASH_HEADER,		/* nest - _A_HEADER_* */
+	ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME,		/* string */
+	ETHTOOL_A_MODULE_FW_FLASH_PASSWORD,		/* u32 */
+	ETHTOOL_A_MODULE_FW_FLASH_STATUS,		/* u32 */
+	ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG,		/* string */
+	ETHTOOL_A_MODULE_FW_FLASH_DONE,			/* uint */
+	ETHTOOL_A_MODULE_FW_FLASH_TOTAL,		/* uint */
+
+	/* add new constants above here */
+	__ETHTOOL_A_MODULE_FW_FLASH_CNT,
+	ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index e682ab628dfa..d358add1611c 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -81,6 +81,8 @@ enum {
 #define IPPROTO_ETHERNET	IPPROTO_ETHERNET
   IPPROTO_RAW = 255,		/* Raw IP packets			*/
 #define IPPROTO_RAW		IPPROTO_RAW
+  IPPROTO_SMC = 256,		/* Shared Memory Communications		*/
+#define IPPROTO_SMC		IPPROTO_SMC
   IPPROTO_MPTCP = 262,		/* Multipath TCP connection		*/
 #define IPPROTO_MPTCP		IPPROTO_MPTCP
   IPPROTO_MAX
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index aa4094ca2444..639894ed1b97 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -1376,7 +1376,7 @@ enum nft_secmark_attributes {
 #define NFTA_SECMARK_MAX	(__NFTA_SECMARK_MAX - 1)
 
 /* Max security context length */
-#define NFT_SECMARK_CTX_MAXLEN		256
+#define NFT_SECMARK_CTX_MAXLEN		4096
 
 /**
  * enum nft_reject_types - nf_tables reject expression reject types
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f917bc6c9b6f..f97f5adc8d51 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2052,6 +2052,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
  *	interface combinations. In each nested item, it contains attributes
  *	defined in &enum nl80211_if_combination_attrs.
+ *	If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
+ *	this attribute contains the interface combinations of the first radio.
+ *	See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
+ *	combinations for the sum of all radios.
  * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
  *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
  *	are managed in software: interfaces of these types aren't subject to
@@ -2856,6 +2860,14 @@ enum nl80211_commands {
  *	%NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
  *	are used on this connection
  *
+ * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
+ *	belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
+ *
+ * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
+ *	supported interface combinations for all radios combined. In each
+ *	nested item, it contains attributes defined in
+ *	&enum nl80211_if_combination_attrs.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3401,6 +3413,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_ASSOC_SPP_AMSDU,
 
+	NL80211_ATTR_WIPHY_RADIOS,
+	NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4277,6 +4292,8 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
  *	mode despite other (regulatory) restrictions, even if the channel is
  *	otherwise completely disabled.
+ * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
+ *	very low power (VLP) AP, despite being NO_IR.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4320,6 +4337,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
 	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
 	NL80211_FREQUENCY_ATTR_CAN_MONITOR,
+	NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4529,6 +4547,8 @@ enum nl80211_sched_scan_match_attr {
  *	Should be used together with %NL80211_RRF_DFS only.
  * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
  * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
+ * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
+ *	despite NO_IR configuration.
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4553,6 +4573,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
 	NL80211_RRF_NO_6GHZ_VLP_CLIENT	= 1<<22,
 	NL80211_RRF_NO_6GHZ_AFC_CLIENT	= 1<<23,
+	NL80211_RRF_ALLOW_6GHZ_VLP_AP	= 1<<24,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -7999,4 +8020,54 @@ enum nl80211_ap_settings_flags {
 	NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT	= 1 << 1,
 };
 
+/**
+ * enum nl80211_wiphy_radio_attrs - wiphy radio attributes
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)
+ * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this
+ *	radio. Attribute may be present multiple times.
+ * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface
+ *	combination for this radio. Attribute may be present multiple times
+ *	and contains attributes defined in &enum nl80211_if_combination_attrs.
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_attrs {
+	__NL80211_WIPHY_RADIO_ATTR_INVALID,
+
+	NL80211_WIPHY_RADIO_ATTR_INDEX,
+	NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,
+	NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,
+
+	/* keep last */
+	__NL80211_WIPHY_RADIO_ATTR_LAST,
+	NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).
+ *	The unit is kHz.
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).
+ *	The unit is kHz.
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_freq_range {
+	__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
+
+	NL80211_WIPHY_RADIO_FREQ_ATTR_START,
+	NL80211_WIPHY_RADIO_FREQ_ATTR_END,
+
+	__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
+	NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h
index efc82c318fa2..3a701bd1f31b 100644
--- a/include/uapi/linux/openvswitch.h
+++ b/include/uapi/linux/openvswitch.h
@@ -649,7 +649,8 @@ enum ovs_flow_attr {
  * Actions are passed as nested attributes.
  *
  * Executes the specified actions with the given probability on a per-packet
- * basis.
+ * basis. Nested actions will be able to access the probability value of the
+ * parent @OVS_ACTION_ATTR_SAMPLE.
  */
 enum ovs_sample_attr {
 	OVS_SAMPLE_ATTR_UNSPEC,
@@ -914,6 +915,31 @@ struct check_pkt_len_arg {
 };
 #endif
 
+#define OVS_PSAMPLE_COOKIE_MAX_SIZE 16
+/**
+ * enum ovs_psample_attr - Attributes for %OVS_ACTION_ATTR_PSAMPLE
+ * action.
+ *
+ * @OVS_PSAMPLE_ATTR_GROUP: 32-bit number to identify the source of the
+ * sample.
+ * @OVS_PSAMPLE_ATTR_COOKIE: An optional variable-length binary cookie that
+ * contains user-defined metadata. The maximum length is
+ * OVS_PSAMPLE_COOKIE_MAX_SIZE bytes.
+ *
+ * Sends the packet to the psample multicast group with the specified group and
+ * cookie. It is possible to combine this action with the
+ * %OVS_ACTION_ATTR_TRUNC action to limit the size of the sample.
+ */
+enum ovs_psample_attr {
+	OVS_PSAMPLE_ATTR_GROUP = 1,	/* u32 number. */
+	OVS_PSAMPLE_ATTR_COOKIE,	/* Optional, user specified cookie. */
+
+	/* private: */
+	__OVS_PSAMPLE_ATTR_MAX
+};
+
+#define OVS_PSAMPLE_ATTR_MAX (__OVS_PSAMPLE_ATTR_MAX - 1)
+
 /**
  * enum ovs_action_attr - Action types.
  *
@@ -966,6 +992,8 @@ struct check_pkt_len_arg {
  * of l3 tunnel flag in the tun_flags field of OVS_ACTION_ATTR_ADD_MPLS
  * argument.
  * @OVS_ACTION_ATTR_DROP: Explicit drop action.
+ * @OVS_ACTION_ATTR_PSAMPLE: Send a sample of the packet to external observers
+ * via psample.
  *
  * Only a single header can be set with a single %OVS_ACTION_ATTR_SET.  Not all
  * fields within a header are modifiable, e.g. the IPv4 protocol and fragment
@@ -1004,6 +1032,7 @@ enum ovs_action_attr {
 	OVS_ACTION_ATTR_ADD_MPLS,     /* struct ovs_action_add_mpls. */
 	OVS_ACTION_ATTR_DEC_TTL,      /* Nested OVS_DEC_TTL_ATTR_*. */
 	OVS_ACTION_ATTR_DROP,         /* u32 error code. */
+	OVS_ACTION_ATTR_PSAMPLE,      /* Nested OVS_PSAMPLE_ATTR_*. */
 
 	__OVS_ACTION_ATTR_MAX,	      /* Nothing past this will be accepted
 				       * from userspace. */
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
index 229fc925ec3a..d36d9cdf0c00 100644
--- a/include/uapi/linux/pkt_cls.h
+++ b/include/uapi/linux/pkt_cls.h
@@ -554,6 +554,9 @@ enum {
 	TCA_FLOWER_KEY_SPI,		/* be32 */
 	TCA_FLOWER_KEY_SPI_MASK,	/* be32 */
 
+	TCA_FLOWER_KEY_ENC_FLAGS,	/* be32 */
+	TCA_FLOWER_KEY_ENC_FLAGS_MASK,	/* be32 */
+
 	__TCA_FLOWER_MAX,
 };
 
@@ -674,8 +677,15 @@ enum {
 enum {
 	TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0),
 	TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1),
+	TCA_FLOWER_KEY_FLAGS_TUNNEL_CSUM = (1 << 2),
+	TCA_FLOWER_KEY_FLAGS_TUNNEL_DONT_FRAGMENT = (1 << 3),
+	TCA_FLOWER_KEY_FLAGS_TUNNEL_OAM = (1 << 4),
+	TCA_FLOWER_KEY_FLAGS_TUNNEL_CRIT_OPT = (1 << 5),
+	__TCA_FLOWER_KEY_FLAGS_MAX,
 };
 
+#define TCA_FLOWER_KEY_FLAGS_MAX (__TCA_FLOWER_KEY_FLAGS_MAX - 1)
+
 enum {
 	TCA_FLOWER_KEY_CFM_OPT_UNSPEC,
 	TCA_FLOWER_KEY_CFM_MD_LEVEL,
diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h
index e585db5bf2d2..b765f0e81f20 100644
--- a/include/uapi/linux/psample.h
+++ b/include/uapi/linux/psample.h
@@ -8,7 +8,11 @@ enum {
 	PSAMPLE_ATTR_ORIGSIZE,
 	PSAMPLE_ATTR_SAMPLE_GROUP,
 	PSAMPLE_ATTR_GROUP_SEQ,
-	PSAMPLE_ATTR_SAMPLE_RATE,
+	PSAMPLE_ATTR_SAMPLE_RATE,	/* u32, ratio between observed and
+					 * sampled packets or scaled probability
+					 * if PSAMPLE_ATTR_SAMPLE_PROBABILITY
+					 * is set.
+					 */
 	PSAMPLE_ATTR_DATA,
 	PSAMPLE_ATTR_GROUP_REFCOUNT,
 	PSAMPLE_ATTR_TUNNEL,
@@ -19,6 +23,11 @@ enum {
 	PSAMPLE_ATTR_LATENCY,		/* u64, nanoseconds */
 	PSAMPLE_ATTR_TIMESTAMP,		/* u64, nanoseconds */
 	PSAMPLE_ATTR_PROTO,		/* u16 */
+	PSAMPLE_ATTR_USER_COOKIE,	/* binary, user provided data */
+	PSAMPLE_ATTR_SAMPLE_PROBABILITY,/* no argument, interpret rate in
+					 * PSAMPLE_ATTR_SAMPLE_RATE as a
+					 * probability scaled 0 - U32_MAX.
+					 */
 
 	__PSAMPLE_ATTR_MAX
 };
diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h
index 7cb4a172feed..927c735a5b0e 100644
--- a/include/uapi/linux/tcp_metrics.h
+++ b/include/uapi/linux/tcp_metrics.h
@@ -1,8 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 /* tcp_metrics.h - TCP Metrics Interface */
 
-#ifndef _LINUX_TCP_METRICS_H
-#define _LINUX_TCP_METRICS_H
+#ifndef _UAPI_LINUX_TCP_METRICS_H
+#define _UAPI_LINUX_TCP_METRICS_H
 
 #include <linux/types.h>
 
@@ -27,6 +27,22 @@ enum tcp_metric_index {
 
 #define TCP_METRIC_MAX	(__TCP_METRIC_MAX - 1)
 
+/* Re-define enum tcp_metric_index, again, using the values carried
+ * as netlink attribute types.
+ */
+enum {
+	TCP_METRICS_A_METRICS_RTT = 1,
+	TCP_METRICS_A_METRICS_RTTVAR,
+	TCP_METRICS_A_METRICS_SSTHRESH,
+	TCP_METRICS_A_METRICS_CWND,
+	TCP_METRICS_A_METRICS_REODERING,
+	TCP_METRICS_A_METRICS_RTT_US,
+	TCP_METRICS_A_METRICS_RTTVAR_US,
+
+	__TCP_METRICS_A_METRICS_MAX
+};
+#define TCP_METRICS_A_METRICS_MAX (__TCP_METRICS_A_METRICS_MAX - 1)
+
 enum {
 	TCP_METRICS_ATTR_UNSPEC,
 	TCP_METRICS_ATTR_ADDR_IPV4,		/* u32 */
@@ -58,4 +74,4 @@ enum {
 
 #define TCP_METRICS_CMD_MAX	(__TCP_METRICS_CMD_MAX - 1)
 
-#endif /* _LINUX_TCP_METRICS_H */
+#endif /* _UAPI_LINUX_TCP_METRICS_H */
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index d950d02ab791..f28701500714 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -321,6 +321,7 @@ enum xfrm_attr_type_t {
 	XFRMA_IF_ID,		/* __u32 */
 	XFRMA_MTIMER_THRESH,	/* __u32 in seconds for input SA */
 	XFRMA_SA_DIR,		/* __u8 */
+	XFRMA_NAT_KEEPALIVE_INTERVAL,	/* __u32 in seconds for NAT keepalive */
 	__XFRMA_MAX
 
 #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK	/* Compatibility */