ALSA: hda - Add the controller helper codes to hda-core module

This patch adds the controller helper codes to hda-core library.
The I/O access ops are added to the bus ops.  The CORB/RIRB, the basic
attributes like irq# and iomap address, some locks and the list of
streams are added to the bus object, together with the stream object
and its helpers.

Currently the codes are just copied from the legacy driver, so you can
find duplicated codes in both directories.  Only constants are removed
from the original hda_controller.h.  More integration work will follow
in the later patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 152 insertions, 0 deletions

diff --git a/include/sound/hda_register.h b/include/sound/hda_register.h
new file mode 100644
index 000000000000..4f6d3fce6ee6
--- /dev/null
+++ b/include/sound/hda_register.h
@@ -0,0 +1,152 @@
+/*
+ * HD-audio controller (Azalia) registers and helpers
+ *
+ * For traditional reasons, we still use azx_ prefix here
+ */
+
+#ifndef __SOUND_HDA_REGISTER_H
+#define __SOUND_HDA_REGISTER_H
+
+#include <linux/io.h>
+#include <sound/hdaudio.h>
+
+#define AZX_REG_GCAP			0x00
+#define   AZX_GCAP_64OK		(1 << 0)   /* 64bit address support */
+#define   AZX_GCAP_NSDO		(3 << 1)   /* # of serial data out signals */
+#define   AZX_GCAP_BSS		(31 << 3)  /* # of bidirectional streams */
+#define   AZX_GCAP_ISS		(15 << 8)  /* # of input streams */
+#define   AZX_GCAP_OSS		(15 << 12) /* # of output streams */
+#define AZX_REG_VMIN			0x02
+#define AZX_REG_VMAJ			0x03
+#define AZX_REG_OUTPAY			0x04
+#define AZX_REG_INPAY			0x06
+#define AZX_REG_GCTL			0x08
+#define   AZX_GCTL_RESET	(1 << 0)   /* controller reset */
+#define   AZX_GCTL_FCNTRL	(1 << 1)   /* flush control */
+#define   AZX_GCTL_UNSOL	(1 << 8)   /* accept unsol. response enable */
+#define AZX_REG_WAKEEN			0x0c
+#define AZX_REG_STATESTS		0x0e
+#define AZX_REG_GSTS			0x10
+#define   AZX_GSTS_FSTS		(1 << 1)   /* flush status */
+#define AZX_REG_INTCTL			0x20
+#define AZX_REG_INTSTS			0x24
+#define AZX_REG_WALLCLK			0x30	/* 24Mhz source */
+#define AZX_REG_OLD_SSYNC		0x34	/* SSYNC for old ICH */
+#define AZX_REG_SSYNC			0x38
+#define AZX_REG_CORBLBASE		0x40
+#define AZX_REG_CORBUBASE		0x44
+#define AZX_REG_CORBWP			0x48
+#define AZX_REG_CORBRP			0x4a
+#define   AZX_CORBRP_RST	(1 << 15)  /* read pointer reset */
+#define AZX_REG_CORBCTL			0x4c
+#define   AZX_CORBCTL_RUN	(1 << 1)   /* enable DMA */
+#define   AZX_CORBCTL_CMEIE	(1 << 0)   /* enable memory error irq */
+#define AZX_REG_CORBSTS			0x4d
+#define   AZX_CORBSTS_CMEI	(1 << 0)   /* memory error indication */
+#define AZX_REG_CORBSIZE		0x4e
+
+#define AZX_REG_RIRBLBASE		0x50
+#define AZX_REG_RIRBUBASE		0x54
+#define AZX_REG_RIRBWP			0x58
+#define   AZX_RIRBWP_RST	(1 << 15)  /* write pointer reset */
+#define AZX_REG_RINTCNT			0x5a
+#define AZX_REG_RIRBCTL			0x5c
+#define   AZX_RBCTL_IRQ_EN	(1 << 0)   /* enable IRQ */
+#define   AZX_RBCTL_DMA_EN	(1 << 1)   /* enable DMA */
+#define   AZX_RBCTL_OVERRUN_EN	(1 << 2)   /* enable overrun irq */
+#define AZX_REG_RIRBSTS			0x5d
+#define   AZX_RBSTS_IRQ		(1 << 0)   /* response irq */
+#define   AZX_RBSTS_OVERRUN	(1 << 2)   /* overrun irq */
+#define AZX_REG_RIRBSIZE		0x5e
+
+#define AZX_REG_IC			0x60
+#define AZX_REG_IR			0x64
+#define AZX_REG_IRS			0x68
+#define   AZX_IRS_VALID		(1<<1)
+#define   AZX_IRS_BUSY		(1<<0)
+
+#define AZX_REG_DPLBASE			0x70
+#define AZX_REG_DPUBASE			0x74
+#define   AZX_DPLBASE_ENABLE	0x1	/* Enable position buffer */
+
+/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
+enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
+
+/* stream register offsets from stream base */
+#define AZX_REG_SD_CTL			0x00
+#define AZX_REG_SD_STS			0x03
+#define AZX_REG_SD_LPIB			0x04
+#define AZX_REG_SD_CBL			0x08
+#define AZX_REG_SD_LVI			0x0c
+#define AZX_REG_SD_FIFOW		0x0e
+#define AZX_REG_SD_FIFOSIZE		0x10
+#define AZX_REG_SD_FORMAT		0x12
+#define AZX_REG_SD_BDLPL		0x18
+#define AZX_REG_SD_BDLPU		0x1c
+
+/* PCI space */
+#define AZX_PCIREG_TCSEL		0x44
+
+/*
+ * other constants
+ */
+
+/* max number of fragments - we may use more if allocating more pages for BDL */
+#define BDL_SIZE		4096
+#define AZX_MAX_BDL_ENTRIES	(BDL_SIZE / 16)
+#define AZX_MAX_FRAG		32
+/* max buffer size - no h/w limit, you can increase as you like */
+#define AZX_MAX_BUF_SIZE	(1024*1024*1024)
+
+/* RIRB int mask: overrun[2], response[0] */
+#define RIRB_INT_RESPONSE	0x01
+#define RIRB_INT_OVERRUN	0x04
+#define RIRB_INT_MASK		0x05
+
+/* STATESTS int mask: S3,SD2,SD1,SD0 */
+#define STATESTS_INT_MASK	((1 << HDA_MAX_CODECS) - 1)
+
+/* SD_CTL bits */
+#define SD_CTL_STREAM_RESET	0x01	/* stream reset bit */
+#define SD_CTL_DMA_START	0x02	/* stream DMA start bit */
+#define SD_CTL_STRIPE		(3 << 16)	/* stripe control */
+#define SD_CTL_TRAFFIC_PRIO	(1 << 18)	/* traffic priority */
+#define SD_CTL_DIR		(1 << 19)	/* bi-directional stream */
+#define SD_CTL_STREAM_TAG_MASK	(0xf << 20)
+#define SD_CTL_STREAM_TAG_SHIFT	20
+
+/* SD_CTL and SD_STS */
+#define SD_INT_DESC_ERR		0x10	/* descriptor error interrupt */
+#define SD_INT_FIFO_ERR		0x08	/* FIFO error interrupt */
+#define SD_INT_COMPLETE		0x04	/* completion interrupt */
+#define SD_INT_MASK		(SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
+				 SD_INT_COMPLETE)
+
+/* SD_STS */
+#define SD_STS_FIFO_READY	0x20	/* FIFO ready */
+
+/* INTCTL and INTSTS */
+#define AZX_INT_ALL_STREAM	0xff	   /* all stream interrupts */
+#define AZX_INT_CTRL_EN	0x40000000 /* controller interrupt enable bit */
+#define AZX_INT_GLOBAL_EN	0x80000000 /* global interrupt enable bit */
+
+/* below are so far hardcoded - should read registers in future */
+#define AZX_MAX_CORB_ENTRIES	256
+#define AZX_MAX_RIRB_ENTRIES	256
+
+/*
+ * helpers to read the stream position
+ */
+static inline unsigned int
+snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
+{
+	return snd_hdac_stream_readl(stream, SD_LPIB);
+}
+
+static inline unsigned int
+snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
+{
+	return le32_to_cpu(*stream->posbuf);
+}
+
+#endif /* __SOUND_HDA_REGISTER_H */