net: dsa: felix: perform switch setup for tag_8021q

Unlike sja1105, the only other user of the software-defined tag_8021q.c
tagger format, the implementation we choose for the Felix DSA switch
driver preserves full functionality under a vlan_filtering bridge
(i.e. IP termination works through the DSA user ports under all
circumstances).

The tag_8021q protocol just wants:
- Identifying the ingress switch port based on the RX VLAN ID, as seen
  by the CPU. We achieve this by using the TCAM engines (which are also
  used for tc-flower offload) to push the RX VLAN as a second, outer
  tag, on egress towards the CPU port.
- Steering traffic injected into the switch from the network stack
  towards the correct front port based on the TX VLAN, and consuming
  (popping) that header on the switch's egress.

A tc-flower pseudocode of the static configuration done by the driver
would look like this:

$ tc qdisc add dev <cpu-port> clsact
$ for eth in swp0 swp1 swp2 swp3; do \
	tc filter add dev <cpu-port> egress flower indev ${eth} \
		action vlan push id <rxvlan> protocol 802.1ad; \
	tc filter add dev <cpu-port> ingress protocol 802.1Q flower
		vlan_id <txvlan> action vlan pop \
		action mirred egress redirect dev ${eth}; \
done

but of course since DSA does not register network interfaces for the CPU
port, this configuration would be impossible for the user to do. Also,
due to the same reason, it is impossible for the user to inadvertently
delete these rules using tc. These rules do not collide in any way with
tc-flower, they just consume some TCAM space, which is something we can
live with.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 5 insertions, 0 deletions

diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 93c22627dedd..6a61c499a30d 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -610,6 +610,7 @@ struct ocelot_port {
 	phy_interface_t			phy_mode;
 
 	u8				*xmit_template;
+	bool				is_dsa_8021q_cpu;
 };
 
 struct ocelot {
@@ -760,6 +761,7 @@ void ocelot_adjust_link(struct ocelot *ocelot, int port,
 			struct phy_device *phydev);
 int ocelot_port_vlan_filtering(struct ocelot *ocelot, int port, bool enabled);
 void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state);
+void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot);
 int ocelot_port_bridge_join(struct ocelot *ocelot, int port,
 			    struct net_device *bridge);
 int ocelot_port_bridge_leave(struct ocelot *ocelot, int port,
diff --git a/include/soc/mscc/ocelot_vcap.h b/include/soc/mscc/ocelot_vcap.h
index 76e01c927e17..25fd525aaf92 100644
--- a/include/soc/mscc/ocelot_vcap.h
+++ b/include/soc/mscc/ocelot_vcap.h
@@ -693,5 +693,8 @@ int ocelot_vcap_filter_add(struct ocelot *ocelot,
 			   struct netlink_ext_ack *extack);
 int ocelot_vcap_filter_del(struct ocelot *ocelot,
 			   struct ocelot_vcap_filter *rule);
+struct ocelot_vcap_filter *
+ocelot_vcap_block_find_filter_by_id(struct ocelot_vcap_block *block, int id,
+				    bool tc_offload);
 
 #endif /* _OCELOT_VCAP_H_ */